1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
|
/*
* Copyright 2009-2012 Freescale Semiconductor, Inc
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/fsl_law.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_A003399_NOR_WORKAROUND
void setup_ifc(void)
{
struct fsl_ifc ifc_regs = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
u32 _mas0, _mas1, _mas2, _mas3, _mas7;
phys_addr_t flash_phys = CONFIG_SYS_FLASH_BASE_PHYS;
/*
* Adjust the TLB we were running out of to match the phys addr of the
* chip select we are adjusting and will return to.
*/
flash_phys += (~CONFIG_SYS_AMASK0) + 1 - 4*1024*1024;
_mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(15);
_mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_IPROT |
MAS1_TSIZE(BOOKE_PAGESZ_4M);
_mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE, MAS2_I|MAS2_G);
_mas3 = FSL_BOOKE_MAS3(flash_phys, 0, MAS3_SW|MAS3_SR|MAS3_SX);
_mas7 = FSL_BOOKE_MAS7(flash_phys);
mtspr(MAS0, _mas0);
mtspr(MAS1, _mas1);
mtspr(MAS2, _mas2);
mtspr(MAS3, _mas3);
mtspr(MAS7, _mas7);
asm volatile("isync;msync;tlbwe;isync");
#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB)
/*
* TLB entry for debuggging in AS1
* Create temporary TLB entry in AS0 to handle debug exception
* As on debug exception MSR is cleared i.e. Address space is changed
* to 0. A TLB entry (in AS0) is required to handle debug exception generated
* in AS1.
*
* TLB entry is created for IVPR + IVOR15 to map on valid OP code address
* bacause flash's physical address is going to change as
* CONFIG_SYS_FLASH_BASE_PHYS.
*/
_mas0 = MAS0_TLBSEL(1) |
MAS0_ESEL(CONFIG_SYS_PPC_E500_DEBUG_TLB);
_mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_IPROT |
MAS1_TSIZE(BOOKE_PAGESZ_4M);
_mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE, MAS2_I|MAS2_G);
_mas3 = FSL_BOOKE_MAS3(flash_phys, 0, MAS3_SW|MAS3_SR|MAS3_SX);
_mas7 = FSL_BOOKE_MAS7(flash_phys);
mtspr(MAS0, _mas0);
mtspr(MAS1, _mas1);
mtspr(MAS2, _mas2);
mtspr(MAS3, _mas3);
mtspr(MAS7, _mas7);
asm volatile("isync;msync;tlbwe;isync");
#endif
/* Change flash's physical address */
ifc_out32(&(ifc_regs.gregs->cspr_cs[0].cspr), CONFIG_SYS_CSPR0);
ifc_out32(&(ifc_regs.gregs->csor_cs[0].csor), CONFIG_SYS_CSOR0);
ifc_out32(&(ifc_regs.gregs->amask_cs[0].amask), CONFIG_SYS_AMASK0);
return ;
}
#endif
/* We run cpu_init_early_f in AS = 1 */
void cpu_init_early_f(void *fdt)
{
u32 mas0, mas1, mas2, mas3, mas7;
int i;
#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#endif
#ifdef CONFIG_A003399_NOR_WORKAROUND
ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
u32 *dst, *src;
void (*setup_ifc_sram)(void);
#endif
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
/*
* Clear initial global data
* we don't use memset so we can share this code with NAND_SPL
*/
for (i = 0; i < sizeof(gd_t); i++)
((char *)gd)[i] = 0;
#ifdef CONFIG_QEMU_E500
/*
* CONFIG_SYS_CCSRBAR_PHYS below may use gd->fdt_blob on ePAPR systems,
* so we need to populate it before it accesses it.
*/
gd->fdt_blob = fdt;
#endif
mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(13);
mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_TSIZE(BOOKE_PAGESZ_1M);
mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G);
mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS, 0, MAS3_SW|MAS3_SR);
mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_PHYS);
write_tlb(mas0, mas1, mas2, mas3, mas7);
/*
* Work Around for IFC Erratum A-003549. This issue is P1010
* specific. LCLK(a free running clk signal) is muxed with IFC_CS3 on P1010 SOC
* Hence specifically selecting CS3.
*/
#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549
setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_LCLK_IFC_CS3);
#endif
init_laws();
/*
* Work Around for IFC Erratum A003399, issue will hit only when execution
* from NOR Flash
*/
#ifdef CONFIG_A003399_NOR_WORKAROUND
#define SRAM_BASE_ADDR (0x00000000)
/* TLB for SRAM */
mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(9);
mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS |
MAS1_TSIZE(BOOKE_PAGESZ_1M);
mas2 = FSL_BOOKE_MAS2(SRAM_BASE_ADDR, MAS2_I);
mas3 = FSL_BOOKE_MAS3(SRAM_BASE_ADDR, 0, MAS3_SX|MAS3_SW|MAS3_SR);
mas7 = FSL_BOOKE_MAS7(0);
write_tlb(mas0, mas1, mas2, mas3, mas7);
out_be32(&l2cache->l2srbar0, SRAM_BASE_ADDR);
out_be32(&l2cache->l2errdis,
(MPC85xx_L2ERRDIS_MBECC | MPC85xx_L2ERRDIS_SBECC));
out_be32(&l2cache->l2ctl,
(MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE));
/*
* Copy the code in setup_ifc to L2SRAM. Do a word copy
* because NOR Flash on P1010 does not support byte
* access (Erratum IFC-A002769)
*/
setup_ifc_sram = (void *)SRAM_BASE_ADDR;
dst = (u32 *) SRAM_BASE_ADDR;
src = (u32 *) setup_ifc;
for (i = 0; i < 1024; i++) {
/* cppcheck-suppress nullPointer */
*dst++ = *src++;
}
/* cppcheck-suppress nullPointer */
setup_ifc_sram();
/* CLEANUP */
clrbits_be32(&l2cache->l2ctl,
(MPC85xx_L2CTL_L2E |
MPC85xx_L2CTL_L2SRAM_ENTIRE));
out_be32(&l2cache->l2srbar0, 0x0);
#endif
invalidate_tlb(1);
#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && \
!(defined(CONFIG_SPL_INIT_MINIMAL) && defined(CONFIG_SPL_BUILD)) && \
!defined(CONFIG_NAND_SPL)
disable_tlb(CONFIG_SYS_PPC_E500_DEBUG_TLB);
#endif
init_tlbs();
}
|
