1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
*/
#include <common.h>
#include <cpu_func.h>
#include <mmc.h>
#include <asm/io.h>
#include <asm/ioapic.h>
#include <asm/irq.h>
#include <asm/mrccache.h>
#include <asm/mtrr.h>
#include <asm/pci.h>
#include <asm/post.h>
#include <asm/arch/device.h>
#include <asm/arch/msg_port.h>
#include <asm/arch/quark.h>
static void quark_setup_mtrr(void)
{
u32 base, mask;
int i;
disable_caches();
/* mark the VGA RAM area as uncacheable */
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_A0000,
MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE));
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_B0000,
MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE));
/* mark other fixed range areas as cacheable */
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_64K_00000,
MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_64K_40000,
MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_80000,
MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_90000,
MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
for (i = MTRR_FIX_4K_C0000; i <= MTRR_FIX_4K_FC000; i++)
msg_port_write(MSG_PORT_HOST_BRIDGE, i,
MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
/* variable range MTRR#0: ROM area */
mask = ~(CONFIG_SYS_MONITOR_LEN - 1);
base = CONFIG_SYS_TEXT_BASE & mask;
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYBASE(MTRR_VAR_ROM),
base | MTRR_TYPE_WRBACK);
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYMASK(MTRR_VAR_ROM),
mask | MTRR_PHYS_MASK_VALID);
/* variable range MTRR#1: eSRAM area */
mask = ~(ESRAM_SIZE - 1);
base = CONFIG_ESRAM_BASE & mask;
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYBASE(MTRR_VAR_ESRAM),
base | MTRR_TYPE_WRBACK);
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYMASK(MTRR_VAR_ESRAM),
mask | MTRR_PHYS_MASK_VALID);
/* enable both variable and fixed range MTRRs */
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_DEF_TYPE,
MTRR_DEF_TYPE_EN | MTRR_DEF_TYPE_FIX_EN);
enable_caches();
}
static void quark_setup_bars(void)
{
/* GPIO - D31:F0:R44h */
qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GBA,
CONFIG_GPIO_BASE | IO_BAR_EN);
/* ACPI PM1 Block - D31:F0:R48h */
qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_PM1BLK,
CONFIG_ACPI_PM1_BASE | IO_BAR_EN);
/* GPE0 - D31:F0:R4Ch */
qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GPE0BLK,
CONFIG_ACPI_GPE0_BASE | IO_BAR_EN);
/* WDT - D31:F0:R84h */
qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_WDTBA,
CONFIG_WDT_BASE | IO_BAR_EN);
/* RCBA - D31:F0:RF0h */
qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA,
CONFIG_RCBA_BASE | MEM_BAR_EN);
/* ACPI P Block - Msg Port 04:R70h */
msg_port_write(MSG_PORT_RMU, PBLK_BA,
CONFIG_ACPI_PBLK_BASE | IO_BAR_EN);
/* SPI DMA - Msg Port 04:R7Ah */
msg_port_write(MSG_PORT_RMU, SPI_DMA_BA,
CONFIG_SPI_DMA_BASE | IO_BAR_EN);
/* PCIe ECAM */
msg_port_write(MSG_PORT_MEM_ARBITER, AEC_CTRL,
CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN);
msg_port_write(MSG_PORT_HOST_BRIDGE, HEC_REG,
CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN);
}
static void quark_pcie_early_init(void)
{
/*
* Step1: Assert PCIe signal PERST#
*
* The CPU interface to the PERST# signal is platform dependent.
* Call the board-specific codes to perform this task.
*/
board_assert_perst();
/* Step2: PHY common lane reset */
msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_PHY_LANE_RST);
/* wait 1 ms for PHY common lane reset */
mdelay(1);
/* Step3: PHY sideband interface reset and controller main reset */
msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG,
PCIE_PHY_SB_RST | PCIE_CTLR_MAIN_RST);
/* wait 80ms for PLL to lock */
mdelay(80);
/* Step4: Controller sideband interface reset */
msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_CTLR_SB_RST);
/* wait 20ms for controller sideband interface reset */
mdelay(20);
/* Step5: De-assert PERST# */
board_deassert_perst();
/* Step6: Controller primary interface reset */
msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_CTLR_PRI_RST);
/* Mixer Load Lane 0 */
msg_port_io_clrbits(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L0,
(1 << 6) | (1 << 7));
/* Mixer Load Lane 1 */
msg_port_io_clrbits(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L1,
(1 << 6) | (1 << 7));
}
static void quark_usb_early_init(void)
{
/* The sequence below comes from Quark firmware writer guide */
msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_GLOBAL_PORT,
1 << 1, (1 << 6) | (1 << 7));
msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_COMPBG,
(1 << 8) | (1 << 9), (1 << 7) | (1 << 10));
msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 29);
msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL1, 1 << 1);
msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_PLL1,
(1 << 3) | (1 << 4) | (1 << 5), 1 << 6);
msg_port_alt_clrbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 29);
msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 24);
}
static void quark_thermal_early_init(void)
{
/* The sequence below comes from Quark firmware writer guide */
/* thermal sensor mode config */
msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG1,
(1 << 3) | (1 << 4) | (1 << 5), 1 << 5);
msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG1,
(1 << 8) | (1 << 9) | (1 << 10) | (1 << 11) |
(1 << 12), 1 << 9);
msg_port_alt_setbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 14);
msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 17);
msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 18);
msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG2, 0xffff, 0x011f);
msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG3, 0xff, 0x17);
msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG3,
(1 << 8) | (1 << 9), 1 << 8);
msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG3, 0xff000000);
msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG4,
0x7ff800, 0xc8 << 11);
/* thermal monitor catastrophic trip set point (105 celsius) */
msg_port_clrsetbits(MSG_PORT_RMU, TS_TRIP, 0xff, 155);
/* thermal monitor catastrophic trip clear point (0 celsius) */
msg_port_clrsetbits(MSG_PORT_RMU, TS_TRIP, 0xff0000, 50 << 16);
/* take thermal sensor out of reset */
msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG4, 1 << 0);
/* enable thermal monitor */
msg_port_setbits(MSG_PORT_RMU, TS_MODE, 1 << 15);
/* lock all thermal configuration */
msg_port_setbits(MSG_PORT_RMU, RMU_CTRL, (1 << 5) | (1 << 6));
}
static void quark_enable_legacy_seg(void)
{
msg_port_setbits(MSG_PORT_HOST_BRIDGE, HMISC2,
HMISC2_SEGE | HMISC2_SEGF | HMISC2_SEGAB);
}
int arch_cpu_init(void)
{
int ret;
post_code(POST_CPU_INIT);
ret = x86_cpu_init_f();
if (ret)
return ret;
/*
* Quark SoC does not support MSR MTRRs. Fixed and variable range MTRRs
* are accessed indirectly via the message port and not the traditional
* MSR mechanism. Only UC, WT and WB cache types are supported.
*/
quark_setup_mtrr();
/*
* Quark SoC has some non-standard BARs (excluding PCI standard BARs)
* which need be initialized with suggested values
*/
quark_setup_bars();
/* Initialize USB2 PHY */
quark_usb_early_init();
/* Initialize thermal sensor */
quark_thermal_early_init();
/* Turn on legacy segments (A/B/E/F) decode to system RAM */
quark_enable_legacy_seg();
return 0;
}
int arch_cpu_init_dm(void)
{
/*
* Initialize PCIe controller
*
* Quark SoC holds the PCIe controller in reset following a power on.
* U-Boot needs to release the PCIe controller from reset. The PCIe
* controller (D23:F0/F1) will not be visible in PCI configuration
* space and any access to its PCI configuration registers will cause
* system hang while it is held in reset.
*/
quark_pcie_early_init();
return 0;
}
int checkcpu(void)
{
return 0;
}
int print_cpuinfo(void)
{
post_code(POST_CPU_INFO);
return default_print_cpuinfo();
}
static void quark_pcie_init(void)
{
u32 val;
/* PCIe upstream non-posted & posted request size */
qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_CCFG,
CCFG_UPRS | CCFG_UNRS);
qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_CCFG,
CCFG_UPRS | CCFG_UNRS);
/* PCIe packet fast transmit mode (IPF) */
qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MPC2, MPC2_IPF);
qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MPC2, MPC2_IPF);
/* PCIe message bus idle counter (SBIC) */
qrk_pci_read_config_dword(QUARK_PCIE0, PCIE_RP_MBC, &val);
val |= MBC_SBIC;
qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MBC, val);
qrk_pci_read_config_dword(QUARK_PCIE1, PCIE_RP_MBC, &val);
val |= MBC_SBIC;
qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MBC, val);
}
static void quark_usb_init(void)
{
u32 bar;
/* Change USB EHCI packet buffer OUT/IN threshold */
qrk_pci_read_config_dword(QUARK_USB_EHCI, PCI_BASE_ADDRESS_0, &bar);
writel((0x7f << 16) | 0x7f, bar + EHCI_INSNREG01);
/* Disable USB device interrupts */
qrk_pci_read_config_dword(QUARK_USB_DEVICE, PCI_BASE_ADDRESS_0, &bar);
writel(0x7f, bar + USBD_INT_MASK);
writel((0xf << 16) | 0xf, bar + USBD_EP_INT_MASK);
writel((0xf << 16) | 0xf, bar + USBD_EP_INT_STS);
}
static void quark_irq_init(void)
{
struct quark_rcba *rcba;
u32 base;
qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, &base);
base &= ~MEM_BAR_EN;
rcba = (struct quark_rcba *)base;
/*
* Route Quark PCI device interrupt pin to PIRQ
*
* Route device#23's INTA/B/C/D to PIRQA/B/C/D
* Route device#20,21's INTA/B/C/D to PIRQE/F/G/H
*/
writew(PIRQC, &rcba->rmu_ir);
writew(PIRQA | (PIRQB << 4) | (PIRQC << 8) | (PIRQD << 12),
&rcba->d23_ir);
writew(PIRQD, &rcba->core_ir);
writew(PIRQE | (PIRQF << 4) | (PIRQG << 8) | (PIRQH << 12),
&rcba->d20d21_ir);
}
int arch_early_init_r(void)
{
quark_pcie_init();
quark_usb_init();
quark_irq_init();
return 0;
}
int arch_misc_init(void)
{
#ifdef CONFIG_ENABLE_MRC_CACHE
/*
* We intend not to check any return value here, as even MRC cache
* is not saved successfully, it is not a severe error that will
* prevent system from continuing to boot.
*/
mrccache_save();
#endif
/* Assign a unique I/O APIC ID */
io_apic_set_id(1);
return 0;
}
void board_final_cleanup(void)
{
struct quark_rcba *rcba;
u32 base, val;
qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, &base);
base &= ~MEM_BAR_EN;
rcba = (struct quark_rcba *)base;
/* Initialize 'Component ID' to zero */
val = readl(&rcba->esd);
val &= ~0xff0000;
writel(val, &rcba->esd);
/* Lock HMBOUND for security */
msg_port_setbits(MSG_PORT_HOST_BRIDGE, HM_BOUND, HM_BOUND_LOCK);
return;
}
|