1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
|
/* SPDX-License-Identifier: BSD-3-Clause */
/*
* From Coreboot soc/intel/broadwell/include/soc/pei_data.h
*
* Copyright (C) 2014 Google Inc.
*/
#ifndef ASM_ARCH_PEI_DATA_H
#define ASM_ARCH_PEI_DATA_H
#include <linux/linkage.h>
#define PEI_VERSION 22
typedef void asmlinkage (*tx_byte_func)(unsigned char byte);
enum board_type {
BOARD_TYPE_CRB_MOBILE = 0, /* CRB Mobile */
BOARD_TYPE_CRB_DESKTOP, /* CRB Desktop */
BOARD_TYPE_USER1, /* SV mobile */
BOARD_TYPE_USER2, /* SV desktop */
BOARD_TYPE_USER3, /* SV server */
BOARD_TYPE_ULT, /* ULT */
BOARD_TYPE_CRB_EMBDEDDED, /* CRB Embedded */
BOARD_TYPE_UNKNOWN,
};
#define MAX_USB2_PORTS 14
#define MAX_USB3_PORTS 6
#define USB_OC_PIN_SKIP 8
enum usb2_port_location {
USB_PORT_BACK_PANEL = 0,
USB_PORT_FRONT_PANEL,
USB_PORT_DOCK,
USB_PORT_MINI_PCIE,
USB_PORT_FLEX,
USB_PORT_INTERNAL,
USB_PORT_SKIP,
USB_PORT_NGFF_DEVICE_DOWN,
};
struct usb2_port_setting {
/*
* Usb Port Length:
* [16:4] = length in inches in octal format
* [3:0] = decimal point
*/
uint16_t length;
uint8_t enable;
uint8_t oc_pin;
uint8_t location;
} __packed;
struct usb3_port_setting {
uint8_t enable;
uint8_t oc_pin;
/*
* Set to 0 if trace length is > 5 inches
* Set to 1 if trace length is <= 5 inches
*/
uint8_t fixed_eq;
} __packed;
struct pei_data {
uint32_t pei_version;
enum board_type board_type;
int boot_mode;
int ec_present;
int usbdebug;
/* Base addresses */
uint32_t pciexbar;
uint16_t smbusbar;
uint32_t xhcibar;
uint32_t ehcibar;
uint32_t gttbar;
uint32_t rcba;
uint32_t pmbase;
uint32_t gpiobase;
uint32_t temp_mmio_base;
uint32_t tseg_size;
/*
* 0 = leave channel enabled
* 1 = disable dimm 0 on channel
* 2 = disable dimm 1 on channel
* 3 = disable dimm 0+1 on channel
*/
int dimm_channel0_disabled;
int dimm_channel1_disabled;
/* Set to 0 for memory down */
uint8_t spd_addresses[4];
/* Enable 2x Refresh Mode */
int ddr_refresh_2x;
/* DQ pins are interleaved on board */
int dq_pins_interleaved;
/* Limit DDR3 frequency */
int max_ddr3_freq;
/* Disable self refresh */
int disable_self_refresh;
/* Disable cmd power/CKEPD */
int disable_cmd_pwr;
/* USB port configuration */
struct usb2_port_setting usb2_ports[MAX_USB2_PORTS];
struct usb3_port_setting usb3_ports[MAX_USB3_PORTS];
/*
* USB3 board specific PHY tuning
*/
/* Valid range: 0x69 - 0x80 */
uint8_t usb3_txout_volt_dn_amp_adj[MAX_USB3_PORTS];
/* Valid range: 0x80 - 0x9c */
uint8_t usb3_txout_imp_sc_volt_amp_adj[MAX_USB3_PORTS];
/* Valid range: 0x39 - 0x80 */
uint8_t usb3_txout_de_emp_adj[MAX_USB3_PORTS];
/* Valid range: 0x3d - 0x4a */
uint8_t usb3_txout_imp_adj_volt_amp[MAX_USB3_PORTS];
/* Console output function */
tx_byte_func tx_byte;
/*
* DIMM SPD data for memory down configurations
* [CHANNEL][SLOT][SPD]
*/
uint8_t spd_data[2][2][512];
/*
* LPDDR3 DQ byte map
* [CHANNEL][ITERATION][2]
*
* Maps which PI clocks are used by what LPDDR DQ Bytes (from CPU side)
* DQByteMap[0] - ClkDQByteMap:
* - If clock is per rank, program to [0xFF, 0xFF]
* - If clock is shared by 2 ranks, program to [0xFF, 0] or [0, 0xFF]
* - If clock is shared by 2 ranks but does not go to all bytes,
* Entry[i] defines which DQ bytes Group i services
* DQByteMap[1] - CmdNDQByteMap: [0] is CmdN/CAA and [1] is CmdN/CAB
* DQByteMap[2] - CmdSDQByteMap: [0] is CmdS/CAA and [1] is CmdS/CAB
* DQByteMap[3] - CkeDQByteMap : [0] is CKE /CAA and [1] is CKE /CAB
* For DDR, DQByteMap[3:1] = [0xFF, 0]
* DQByteMap[4] - CtlDQByteMap : Always program to [0xFF, 0]
* since we have 1 CTL / rank
* DQByteMap[5] - CmdVDQByteMap: Always program to [0xFF, 0]
* since we have 1 CA Vref
*/
uint8_t dq_map[2][6][2];
/*
* LPDDR3 Map from CPU DQS pins to SDRAM DQS pins
* [CHANNEL][MAX_BYTES]
*/
uint8_t dqs_map[2][8];
/* Data read from flash and passed into MRC */
const void *saved_data;
int saved_data_size;
/* Disable use of saved data (can be set by mainboard) */
int disable_saved_data;
/* Data from MRC that should be saved to flash */
void *data_to_save;
int data_to_save_size;
struct pei_memory_info meminfo;
} __packed;
void mainboard_fill_pei_data(struct pei_data *pei_data);
void broadwell_fill_pei_data(struct pei_data *pei_data);
#endif
|
