1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
|
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2010, 2018
* Allied Telesis <www.alliedtelesis.com>
*/
#include <common.h>
#include <net.h>
#include <linux/io.h>
#include <miiphy.h>
#include <netdev.h>
#include <status_led.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include <asm/arch/mpp.h>
#include <asm/arch/gpio.h>
/* Note: GPIO differences between specific boards
*
* We're trying to avoid having multiple build targets for all the Kirkwood
* based boards one area where things tend to differ is GPIO usage. For the
* most part the GPIOs driven by the bootloader are similar enough in function
* that there is no harm in driving them.
*
* XZ4 XS6 XS16 GS24A GT40 GP24A GT24A
* GPIO39 - INT(<) NC MUX_RST_N(>) NC POE_DIS_N(>) NC
*/
#define SBX81LIFKW_OE_LOW ~(BIT(31) | BIT(30) | BIT(28) | BIT(27) | \
BIT(18) | BIT(17) | BIT(13) | BIT(12) | \
BIT(10))
#define SBX81LIFKW_OE_HIGH ~(BIT(0) | BIT(1) | BIT(7))
#define SBX81LIFKW_OE_VAL_LOW (BIT(31) | BIT(30) | BIT(28) | BIT(27))
#define SBX81LIFKW_OE_VAL_HIGH (BIT(0) | BIT(1))
#define MV88E6097_RESET 27
DECLARE_GLOBAL_DATA_PTR;
struct led {
u32 reg;
u32 value;
u32 mask;
};
struct led amber_solid = {
MVEBU_GPIO0_BASE,
BIT(10),
BIT(18) | BIT(10)
};
struct led green_solid = {
MVEBU_GPIO0_BASE,
BIT(18) | BIT(10),
BIT(18) | BIT(10)
};
struct led amber_flash = {
MVEBU_GPIO0_BASE,
0,
BIT(18) | BIT(10)
};
struct led green_flash = {
MVEBU_GPIO0_BASE,
BIT(18),
BIT(18) | BIT(10)
};
static void status_led_set(struct led *led)
{
clrsetbits_le32(led->reg, led->mask, led->value);
}
int board_early_init_f(void)
{
/*
* default gpio configuration
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
mvebu_config_gpio(SBX81LIFKW_OE_VAL_LOW,
SBX81LIFKW_OE_VAL_HIGH,
SBX81LIFKW_OE_LOW, SBX81LIFKW_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
MPP0_SPI_SCn,
MPP1_SPI_MOSI,
MPP2_SPI_SCK,
MPP3_SPI_MISO,
MPP4_UART0_RXD,
MPP5_UART0_TXD,
MPP6_SYSRST_OUTn,
MPP7_PEX_RST_OUTn,
MPP8_TW_SDA,
MPP9_TW_SCK,
MPP10_GPO,
MPP11_GPIO,
MPP12_GPO,
MPP13_GPIO,
MPP14_GPIO,
MPP15_UART0_RTS,
MPP16_UART0_CTS,
MPP17_GPIO,
MPP18_GPO,
MPP19_GPO,
MPP20_GPIO,
MPP21_GPIO,
MPP22_GPIO,
MPP23_GPIO,
MPP24_GPIO,
MPP25_GPIO,
MPP26_GPIO,
MPP27_GPIO,
MPP28_GPIO,
MPP29_GPIO,
MPP30_GPIO,
MPP31_GPIO,
MPP32_GPIO,
MPP33_GPIO,
MPP34_GPIO,
MPP35_GPIO,
MPP36_GPIO,
MPP37_GPIO,
MPP38_GPIO,
MPP39_GPIO,
MPP40_GPIO,
MPP41_GPIO,
MPP42_GPIO,
MPP43_GPIO,
MPP44_GPIO,
MPP45_GPIO,
MPP46_GPIO,
MPP47_GPIO,
MPP48_GPIO,
MPP49_GPIO,
0
};
kirkwood_mpp_conf(kwmpp_config, NULL);
return 0;
}
int board_init(void)
{
/* Power-down unused subsystems. The required
* subsystems are:
*
* GE0 b0
* PEX0 PHY b1
* PEX0.0 b2
* TSU b5
* SDRAM b6
* RUNIT b7
*/
writel((BIT(0) | BIT(1) | BIT(2) |
BIT(5) | BIT(6) | BIT(7)),
KW_CPU_REG_BASE + 0x1c);
/* address of boot parameters */
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
status_led_set(&amber_solid);
return 0;
}
#ifdef CONFIG_RESET_PHY_R
/* automatically defined by kirkwood config.h */
void reset_phy(void)
{
}
#endif
#ifdef CONFIG_MV88E61XX_SWITCH
int mv88e61xx_hw_reset(struct phy_device *phydev)
{
/* Ensure the 88e6097 gets at least 10ms Reset
*/
kw_gpio_set_value(MV88E6097_RESET, 0);
mdelay(20);
kw_gpio_set_value(MV88E6097_RESET, 1);
mdelay(20);
phydev->advertising = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full;
return 0;
}
#endif
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
status_led_set(&green_flash);
return 0;
}
#endif
|
