1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
|
/*
* Board functions for Compulab CM-T54 board
*
* Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
*
* Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <fdt_support.h>
#include <usb.h>
#include <mmc.h>
#include <palmas.h>
#include <asm/gpio.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/clock.h>
#include <asm/arch/ehci.h>
#include <asm/ehci-omap.h>
#include "../common/eeprom.h"
#define DIE_ID_REG_BASE (OMAP54XX_L4_CORE_BASE + 0x2000)
#define DIE_ID_REG_OFFSET 0x200
DECLARE_GLOBAL_DATA_PTR;
#if !defined(CONFIG_SPL_BUILD)
inline void set_muxconf_regs_essential(void){};
#endif
const struct omap_sysinfo sysinfo = {
"Board: CM-T54\n"
};
/*
* Routine: board_init
* Description: hardware init.
*/
int board_init(void)
{
gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100); /* boot param addr */
return 0;
}
/*
* Routine: cm_t54_palmas_regulator_set
* Description: select voltage and turn on/off Palmas PMIC regulator.
*/
static int cm_t54_palmas_regulator_set(u8 vreg, u8 vval, u8 creg, u8 cval)
{
int err;
/* Setup voltage */
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, vreg, vval);
if (err) {
printf("cm_t54: could not set regulator 0x%02x voltage : %d\n",
vreg, err);
return err;
}
/* Turn on/off regulator */
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, creg, cval);
if (err) {
printf("cm_t54: could not turn on/off regulator 0x%02x : %d\n",
creg, err);
return err;
}
return 0;
}
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
#define SB_T54_CD_GPIO 228
#define SB_T54_WP_GPIO 229
int board_mmc_getcd(struct mmc *mmc)
{
return !gpio_get_value(SB_T54_CD_GPIO);
}
int board_mmc_init(bd_t *bis)
{
int ret0, ret1;
ret0 = omap_mmc_init(0, 0, 0, -1, SB_T54_WP_GPIO);
if (ret0)
printf("cm_t54: failed to initialize mmc0\n");
ret1 = omap_mmc_init(1, 0, 0, -1, -1);
if (ret1)
printf("cm_t54: failed to initialize mmc1\n");
if (ret0 && ret1)
return -1;
return 0;
}
#endif
#ifdef CONFIG_USB_HOST_ETHER
void ft_board_setup(void *blob, bd_t *bd)
{
uint8_t enetaddr[6];
/* MAC addr */
if (eth_getenv_enetaddr("usbethaddr", enetaddr)) {
fdt_find_and_setprop(blob, "/smsc95xx@0", "mac-address",
enetaddr, 6, 1);
}
}
static void generate_mac_addr(uint8_t *enetaddr)
{
int reg;
reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET;
/*
* create a fake MAC address from the processor ID code.
* first byte is 0x02 to signify locally administered.
*/
enetaddr[0] = 0x02;
enetaddr[1] = readl(reg + 0x10) & 0xff;
enetaddr[2] = readl(reg + 0xC) & 0xff;
enetaddr[3] = readl(reg + 0x8) & 0xff;
enetaddr[4] = readl(reg) & 0xff;
enetaddr[5] = (readl(reg) >> 8) & 0xff;
}
/*
* Routine: handle_mac_address
* Description: prepare MAC address for on-board Ethernet.
*/
static int handle_mac_address(void)
{
uint8_t enetaddr[6];
int ret;
ret = eth_getenv_enetaddr("usbethaddr", enetaddr);
if (ret)
return 0;
ret = cl_eeprom_read_mac_addr(enetaddr);
if (!ret || !is_valid_ether_addr(enetaddr))
generate_mac_addr(enetaddr);
if (!is_valid_ether_addr(enetaddr))
return -1;
return eth_setenv_enetaddr("usbethaddr", enetaddr);
}
int board_eth_init(bd_t *bis)
{
return handle_mac_address();
}
#endif
#ifdef CONFIG_USB_EHCI
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
.port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC,
};
static void setup_host_clocks(bool enable)
{
int usbhost_clk = OPTFCLKEN_HSIC60M_P3_CLK |
OPTFCLKEN_HSIC480M_P3_CLK |
OPTFCLKEN_HSIC60M_P2_CLK |
OPTFCLKEN_HSIC480M_P2_CLK |
OPTFCLKEN_UTMI_P3_CLK |
OPTFCLKEN_UTMI_P2_CLK;
int usbtll_clk = OPTFCLKEN_USB_CH1_CLK_ENABLE |
OPTFCLKEN_USB_CH2_CLK_ENABLE;
int usbhub_clk = CKOBUFFER_CLK_ENABLE_MASK;
if (enable) {
/* Enable port 2 and 3 clocks*/
setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, usbhost_clk);
/* Enable port 2 and 3 usb host ports tll clocks*/
setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl, usbtll_clk);
/* Request FREF_XTAL_CLK clock for HSIC USB Hub */
setbits_le32((*ctrl)->control_ckobuffer, usbhub_clk);
} else {
clrbits_le32((*ctrl)->control_ckobuffer, usbhub_clk);
clrbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl, usbtll_clk);
clrbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, usbhost_clk);
}
}
int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
int ret;
/* VCC_3V3_ETH */
cm_t54_palmas_regulator_set(SMPS9_VOLTAGE, SMPS_VOLT_3V3, SMPS9_CTRL,
SMPS_MODE_SLP_AUTO | SMPS_MODE_ACT_AUTO);
setup_host_clocks(true);
ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
if (ret < 0)
printf("cm_t54: Failed to initialize ehci : %d\n", ret);
return ret;
}
int ehci_hcd_stop(void)
{
int ret = omap_ehci_hcd_stop();
setup_host_clocks(false);
cm_t54_palmas_regulator_set(SMPS9_VOLTAGE, SMPS_VOLT_OFF,
SMPS9_CTRL, SMPS_MODE_SLP_AUTO);
return ret;
}
void usb_hub_reset_devices(int port)
{
/* The LAN9730 needs to be reset after the port power has been set. */
if (port == 3) {
gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 0);
udelay(10);
gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 1);
}
}
#endif
|
