1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2013 Freescale Semiconductor, Inc.
* Author: Shaveta Leekha <shaveta@freescale.com>
*/
#include "idt8t49n222a_serdes_clk.h"
#include <log.h>
#include <linux/delay.h>
#define DEVICE_ID_REG 0x00
static int check_pll_status(u8 idt_addr)
{
u8 val = 0;
int ret;
ret = i2c_read(idt_addr, 0x17, 1, &val, 1);
if (ret < 0) {
printf("IDT:0x%x could not read status register from device.\n",
idt_addr);
return ret;
}
if (val & 0x04) {
debug("idt8t49n222a PLL is LOCKED: %x\n", val);
} else {
printf("idt8t49n222a PLL is not LOCKED: %x\n", val);
return -1;
}
return 0;
}
int set_serdes_refclk(u8 idt_addr, u8 serdes_num,
enum serdes_refclk refclk1,
enum serdes_refclk refclk2, u8 feedback)
{
u8 dev_id = 0;
int i, ret;
debug("IDT:Configuring idt8t49n222a device at I2C address: 0x%2x\n",
idt_addr);
ret = i2c_read(idt_addr, DEVICE_ID_REG, 1, &dev_id, 1);
if (ret < 0) {
debug("IDT:0x%x could not read DEV_ID from device.\n",
idt_addr);
return ret;
}
if ((dev_id != 0x00) && (dev_id != 0x24) && (dev_id != 0x2a)) {
debug("IDT: device at address 0x%x is not idt8t49n222a.\n",
idt_addr);
}
if (serdes_num != 1 && serdes_num != 2) {
debug("serdes_num should be 1 for SerDes1 and"
" 2 for SerDes2.\n");
return -1;
}
if ((refclk1 == SERDES_REFCLK_122_88 && refclk2 != SERDES_REFCLK_122_88)
|| (refclk1 != SERDES_REFCLK_122_88
&& refclk2 == SERDES_REFCLK_122_88)) {
debug("Only one refclk at 122.88MHz is not supported."
" Please set both refclk1 & refclk2 to 122.88MHz"
" or both not to 122.88MHz.\n");
return -1;
}
if (refclk1 != SERDES_REFCLK_100 && refclk1 != SERDES_REFCLK_122_88
&& refclk1 != SERDES_REFCLK_125
&& refclk1 != SERDES_REFCLK_156_25) {
debug("refclk1 should be 100MHZ, 122.88MHz, 125MHz"
" or 156.25MHz.\n");
return -1;
}
if (refclk2 != SERDES_REFCLK_100 && refclk2 != SERDES_REFCLK_122_88
&& refclk2 != SERDES_REFCLK_125
&& refclk2 != SERDES_REFCLK_156_25) {
debug("refclk2 should be 100MHZ, 122.88MHz, 125MHz"
" or 156.25MHz.\n");
return -1;
}
if (feedback != 0 && feedback != 1) {
debug("valid values for feedback are 0(default) or 1.\n");
return -1;
}
/* Configuring IDT for output refclks as
* Refclk1 = 122.88MHz Refclk2 = 122.88MHz
*/
if (refclk1 == SERDES_REFCLK_122_88 &&
refclk2 == SERDES_REFCLK_122_88) {
printf("Setting refclk1:122.88 and refclk2:122.88\n");
for (i = 0; i < NUM_IDT_REGS; i++)
i2c_reg_write(idt_addr, idt_conf_122_88[i][0],
idt_conf_122_88[i][1]);
if (feedback) {
for (i = 0; i < NUM_IDT_REGS_FEEDBACK; i++)
i2c_reg_write(idt_addr,
idt_conf_122_88_feedback[i][0],
idt_conf_122_88_feedback[i][1]);
}
}
if (refclk1 != SERDES_REFCLK_122_88 &&
refclk2 != SERDES_REFCLK_122_88) {
for (i = 0; i < NUM_IDT_REGS; i++)
i2c_reg_write(idt_addr, idt_conf_not_122_88[i][0],
idt_conf_not_122_88[i][1]);
}
/* Configuring IDT for output refclks as
* Refclk1 = 100MHz Refclk2 = 125MHz
*/
if (refclk1 == SERDES_REFCLK_100 && refclk2 == SERDES_REFCLK_125) {
printf("Setting refclk1:100 and refclk2:125\n");
i2c_reg_write(idt_addr, 0x11, 0x10);
}
/* Configuring IDT for output refclks as
* Refclk1 = 125MHz Refclk2 = 125MHz
*/
if (refclk1 == SERDES_REFCLK_125 && refclk2 == SERDES_REFCLK_125) {
printf("Setting refclk1:125 and refclk2:125\n");
i2c_reg_write(idt_addr, 0x10, 0x10);
i2c_reg_write(idt_addr, 0x11, 0x10);
}
/* Configuring IDT for output refclks as
* Refclk1 = 125MHz Refclk2 = 100MHz
*/
if (refclk1 == SERDES_REFCLK_125 && refclk2 == SERDES_REFCLK_100) {
printf("Setting refclk1:125 and refclk2:100\n");
i2c_reg_write(idt_addr, 0x10, 0x10);
}
/* Configuring IDT for output refclks as
* Refclk1 = 156.25MHz Refclk2 = 156.25MHz
*/
if (refclk1 == SERDES_REFCLK_156_25 &&
refclk2 == SERDES_REFCLK_156_25) {
printf("Setting refclk1:156.25 and refclk2:156.25\n");
for (i = 0; i < NUM_IDT_REGS_156_25; i++)
i2c_reg_write(idt_addr, idt_conf_156_25[i][0],
idt_conf_156_25[i][1]);
}
/* Configuring IDT for output refclks as
* Refclk1 = 100MHz Refclk2 = 156.25MHz
*/
if (refclk1 == SERDES_REFCLK_100 &&
refclk2 == SERDES_REFCLK_156_25) {
printf("Setting refclk1:100 and refclk2:156.25\n");
for (i = 0; i < NUM_IDT_REGS_156_25; i++)
i2c_reg_write(idt_addr, idt_conf_100_156_25[i][0],
idt_conf_100_156_25[i][1]);
}
/* Configuring IDT for output refclks as
* Refclk1 = 125MHz Refclk2 = 156.25MHz
*/
if (refclk1 == SERDES_REFCLK_125 &&
refclk2 == SERDES_REFCLK_156_25) {
printf("Setting refclk1:125 and refclk2:156.25\n");
for (i = 0; i < NUM_IDT_REGS_156_25; i++)
i2c_reg_write(idt_addr, idt_conf_125_156_25[i][0],
idt_conf_125_156_25[i][1]);
}
/* Configuring IDT for output refclks as
* Refclk1 = 156.25MHz Refclk2 = 100MHz
*/
if (refclk1 == SERDES_REFCLK_156_25 &&
refclk2 == SERDES_REFCLK_100) {
printf("Setting refclk1:156.25 and refclk2:100\n");
for (i = 0; i < NUM_IDT_REGS_156_25; i++)
i2c_reg_write(idt_addr, idt_conf_156_25_100[i][0],
idt_conf_156_25_100[i][1]);
}
/* Configuring IDT for output refclks as
* Refclk1 = 156.25MHz Refclk2 = 125MHz
*/
if (refclk1 == SERDES_REFCLK_156_25 &&
refclk2 == SERDES_REFCLK_125) {
printf("Setting refclk1:156.25 and refclk2:125\n");
for (i = 0; i < NUM_IDT_REGS_156_25; i++)
i2c_reg_write(idt_addr, idt_conf_156_25_125[i][0],
idt_conf_156_25_125[i][1]);
}
/* waiting for maximum of 1 second if PLL doesn'r get locked
* initially. then check the status again.
*/
if (check_pll_status(idt_addr)) {
mdelay(1000);
if (check_pll_status(idt_addr))
return -1;
}
return 0;
}
|
