1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2019 NXP
*/
#include <common.h>
#include <malloc.h>
#include <errno.h>
#include <fsl_ddr.h>
#include <asm/io.h>
#include <hwconfig.h>
#include <fdt_support.h>
#include <linux/libfdt.h>
#include <env_internal.h>
#include <asm/arch-fsl-layerscape/soc.h>
#include <asm/arch-fsl-layerscape/fsl_icid.h>
#include <i2c.h>
#include <asm/arch/soc.h>
#ifdef CONFIG_FSL_LS_PPA
#include <asm/arch/ppa.h>
#endif
#include <fsl_immap.h>
#include <netdev.h>
#include <fdtdec.h>
#include <miiphy.h>
#include "../common/qixis.h"
DECLARE_GLOBAL_DATA_PTR;
int config_board_mux(void)
{
#if defined(CONFIG_TARGET_LS1028AQDS) && defined(CONFIG_FSL_QIXIS)
u8 reg;
reg = QIXIS_READ(brdcfg[13]);
/* Field| Function
* 7-6 | Controls I2C3 routing (net CFG_MUX_I2C3):
* I2C3 | 10= Routes {SCL, SDA} to CAN1 transceiver as {TX, RX}.
* 5-4 | Controls I2C4 routing (net CFG_MUX_I2C4):
* I2C4 |11= Routes {SCL, SDA} to CAN2 transceiver as {TX, RX}.
*/
reg &= ~(0xf0);
reg |= 0xb0;
QIXIS_WRITE(brdcfg[13], reg);
reg = QIXIS_READ(brdcfg[15]);
/* Field| Function
* 7 | Controls the CAN1 transceiver (net CFG_CAN1_STBY):
* CAN1 | 0= CAN #1 transceiver enabled
* 6 | Controls the CAN2 transceiver (net CFG_CAN2_STBY):
* CAN2 | 0= CAN #2 transceiver enabled
*/
reg &= ~(0xc0);
QIXIS_WRITE(brdcfg[15], reg);
#endif
return 0;
}
int board_init(void)
{
#ifdef CONFIG_ENV_IS_NOWHERE
gd->env_addr = (ulong)&default_environment[0];
#endif
#ifdef CONFIG_FSL_CAAM
sec_init();
#endif
#ifdef CONFIG_FSL_LS_PPA
ppa_init();
#endif
#ifndef CONFIG_SYS_EARLY_PCI_INIT
pci_init();
#endif
#if defined(CONFIG_TARGET_LS1028ARDB)
u8 val = I2C_MUX_CH_DEFAULT;
#ifndef CONFIG_DM_I2C
i2c_write(I2C_MUX_PCA_ADDR_PRI, 0x0b, 1, &val, 1);
#else
struct udevice *dev;
if (!i2c_get_chip_for_busnum(0, I2C_MUX_PCA_ADDR_PRI, 1, &dev))
dm_i2c_write(dev, 0x0b, &val, 1);
#endif
#endif
#if defined(CONFIG_TARGET_LS1028ARDB)
u8 reg;
reg = QIXIS_READ(brdcfg[4]);
/*
* Field | Function
* 3 | DisplayPort Power Enable (net DP_PWR_EN):
* DPPWR | 0= DP_PWR is enabled.
*/
reg &= ~(DP_PWD_EN_DEFAULT_MASK);
QIXIS_WRITE(brdcfg[4], reg);
#endif
return 0;
}
int board_eth_init(bd_t *bis)
{
return pci_eth_init(bis);
}
#if defined(CONFIG_ARCH_MISC_INIT)
int arch_misc_init(void)
{
config_board_mux();
return 0;
}
#endif
int board_early_init_f(void)
{
#ifdef CONFIG_SYS_I2C_EARLY_INIT
i2c_early_init_f();
#endif
fsl_lsch3_early_init_f();
return 0;
}
void detail_board_ddr_info(void)
{
puts("\nDDR ");
print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
print_ddr_info(0);
}
#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
u64 base[CONFIG_NR_DRAM_BANKS];
u64 size[CONFIG_NR_DRAM_BANKS];
ft_cpu_setup(blob, bd);
/* fixup DT for the two GPP DDR banks */
base[0] = gd->bd->bi_dram[0].start;
size[0] = gd->bd->bi_dram[0].size;
base[1] = gd->bd->bi_dram[1].start;
size[1] = gd->bd->bi_dram[1].size;
#ifdef CONFIG_RESV_RAM
/* reduce size if reserved memory is within this bank */
if (gd->arch.resv_ram >= base[0] &&
gd->arch.resv_ram < base[0] + size[0])
size[0] = gd->arch.resv_ram - base[0];
else if (gd->arch.resv_ram >= base[1] &&
gd->arch.resv_ram < base[1] + size[1])
size[1] = gd->arch.resv_ram - base[1];
#endif
fdt_fixup_memory_banks(blob, base, size, 2);
fdt_fixup_icid(blob);
return 0;
}
#endif
#ifdef CONFIG_FSL_QIXIS
int checkboard(void)
{
#ifdef CONFIG_TFABOOT
enum boot_src src = get_boot_src();
#endif
u8 sw;
int clock;
char *board;
char buf[64] = {0};
static const char *freq[6] = {"100.00", "125.00", "156.25",
"161.13", "322.26", "100.00 SS"};
cpu_name(buf);
/* find the board details */
sw = QIXIS_READ(id);
switch (sw) {
case 0x46:
board = "QDS";
break;
case 0x47:
board = "RDB";
break;
case 0x49:
board = "HSSI";
break;
default:
board = "unknown";
break;
}
sw = QIXIS_READ(arch);
printf("Board: %s-%s, Version: %c, boot from ",
buf, board, (sw & 0xf) + 'A' - 1);
sw = QIXIS_READ(brdcfg[0]);
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
#ifdef CONFIG_TFABOOT
if (src == BOOT_SOURCE_SD_MMC) {
puts("SD\n");
} else if (src == BOOT_SOURCE_SD_MMC2) {
puts("eMMC\n");
} else {
#endif
#ifdef CONFIG_SD_BOOT
puts("SD\n");
#elif defined(CONFIG_EMMC_BOOT)
puts("eMMC\n");
#else
switch (sw) {
case 0:
case 4:
printf("NOR\n");
break;
case 1:
printf("NAND\n");
break;
default:
printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
break;
}
#endif
#ifdef CONFIG_TFABOOT
}
#endif
printf("FPGA: v%d (%s)\n", QIXIS_READ(scver), board);
puts("SERDES1 Reference : ");
sw = QIXIS_READ(brdcfg[2]);
#ifdef CONFIG_TARGET_LS1028ARDB
clock = (sw >> 6) & 3;
#else
clock = (sw >> 4) & 0xf;
#endif
printf("Clock1 = %sMHz ", freq[clock]);
#ifdef CONFIG_TARGET_LS1028ARDB
clock = (sw >> 4) & 3;
#else
clock = sw & 0xf;
#endif
printf("Clock2 = %sMHz\n", freq[clock]);
return 0;
}
#endif
|
