blob: 6f82e15f82c3ec1b65dcdc2d4318c35642ee2db6 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
|
/*
* (C) Copyright 2013 Keymile AG
* Valentin Longchamp <valentin.longchamp@keymile.com>
*
* Copyright 2009-2011 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <i2c.h>
#include <hwconfig.h>
#include <asm/mmu.h>
#include <fsl_ddr_sdram.h>
#include <fsl_ddr_dimm_params.h>
DECLARE_GLOBAL_DATA_PTR;
void fsl_ddr_board_options(memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int ctrl_num)
{
if (ctrl_num) {
printf("Wrong parameter for controller number %d", ctrl_num);
return;
}
/* automatic calibration for nb of cycles between read and DQS pre */
popts->cpo_override = 0xFF;
/* 1/2 clk delay between wr command and data strobe */
popts->write_data_delay = 4;
/* clk lauched 1/2 applied cylcle after address command */
popts->clk_adjust = 4;
/* 1T timing: command/address held for only 1 cycle */
popts->twot_en = 0;
/* we have only one module, half str should be OK */
popts->half_strength_driver_enable = 1;
/* wrlvl values overridden as recommended by ddr init func */
popts->wrlvl_override = 1;
popts->wrlvl_sample = 0xf;
popts->wrlvl_start = 0x6;
/* Enable ZQ calibration */
popts->zq_en = 1;
/* DHC_EN =1, ODT = 75 Ohm */
popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR_ODT_75ohm;
}
int dram_init(void)
{
phys_size_t dram_size = 0;
puts("Initializing with SPD\n");
dram_size = fsl_ddr_sdram();
dram_size = setup_ddr_tlbs(dram_size / 0x100000);
dram_size *= 0x100000;
debug(" DDR: ");
gd->ram_size = dram_size;
return 0;
}
|
