1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018 Synopsys, Inc. All rights reserved.
*/
#include <common.h>
#include <malloc.h>
#include <dwmmc.h>
#include <linux/libfdt.h>
#include <fdtdec.h>
#include <asm/arcregs.h>
DECLARE_GLOBAL_DATA_PTR;
#define SYSCON_BASE 0xf000a000
#define AHBCKDIV (void *)(SYSCON_BASE + 0x04)
#define APBCKDIV (void *)(SYSCON_BASE + 0x08)
#define APBCKEN (void *)(SYSCON_BASE + 0x0C)
#define RESET_REG (void *)(SYSCON_BASE + 0x18)
#define CLKSEL (void *)(SYSCON_BASE + 0x24)
#define CLKSTAT (void *)(SYSCON_BASE + 0x28)
#define PLLCON (void *)(SYSCON_BASE + 0x2C)
#define APBCKSEL (void *)(SYSCON_BASE + 0x30)
#define AHBCKEN (void *)(SYSCON_BASE + 0x34)
#define USBPHY_PLL (void *)(SYSCON_BASE + 0x78)
#define USBCFG (void *)(SYSCON_BASE + 0x7c)
#define PLL_MASK_0 0xffcfffff
#define PLL_MASK_1 0xffcfff00
#define PLL_MASK_2 0xfbcfff00
#define CLKSEL_DEFAULT 0x5a690000
static int set_cpu_freq(unsigned int clk)
{
clk /= 1000000;
/* Set clk to ext Xtal (LSN value 0) */
writel(CLKSEL_DEFAULT, CLKSEL);
switch (clk) {
case 16:
/* Bypass mode */
return 0;
case 50:
writel(readl(PLLCON) & PLL_MASK_0, PLLCON);
/* pll_off=1, M=25, N=1, OD=3, PLL_OUT_CLK=50M */
writel((readl(PLLCON) & PLL_MASK_1) | 0x300191, PLLCON);
/* pll_off=0, M=25, N=1, OD=3, PLL_OUT_CLK=50M */
writel((readl(PLLCON) & PLL_MASK_2) | 0x300191, PLLCON);
break;
case 72:
writel(readl(PLLCON) & PLL_MASK_0, PLLCON);
/* pll_off=1, M=18, N=1, OD=2, PLL_OUT_CLK=72M */
writel((readl(PLLCON) & PLL_MASK_1) | 0x200121, PLLCON);
/* pll_off=0, M=18, N=1, OD=2, PLL_OUT_CLK=72M */
writel((readl(PLLCON) & PLL_MASK_2) | 0x200121, PLLCON);
break;
case 100:
writel(readl(PLLCON) & PLL_MASK_0, PLLCON);
/* pll_off=1,M=25, N=1, OD=2, PLL_OUT_CLK=100M */
writel((readl(PLLCON) & PLL_MASK_1) | 0x200191, PLLCON);
/* pll_off=0,M=25, N=1, OD=2, PLL_OUT_CLK=100M */
writel((readl(PLLCON) & PLL_MASK_2) | 0x200191, PLLCON);
break;
case 136:
writel(readl(PLLCON) & PLL_MASK_0, PLLCON);
/* pll_off=1, M=17, N=1, OD=1, PLL_OUT_CLK=136M */
writel((readl(PLLCON) & PLL_MASK_1) | 0x100111, PLLCON);
/* pll_off=0, M=17, N=1, OD=1, PLL_OUT_CLK=136M */
writel((readl(PLLCON) & PLL_MASK_2) | 0x100111, PLLCON);
break;
case 144:
writel(readl(PLLCON) & PLL_MASK_0, PLLCON);
/* pll_off=1, M=18, N=1, OD=1, PLL_OUT_CLK=144M */
writel((readl(PLLCON) & PLL_MASK_1) | 0x100121, PLLCON);
/* pll_off=0, M=18, N=1, OD=1, PLL_OUT_CLK=144M */
writel((readl(PLLCON) & PLL_MASK_2) | 0x100121, PLLCON);
break;
default:
return -EINVAL;
}
while (!(readl(CLKSTAT) & 0x4))
;
/* Set clk from PLL on bus (LSN = 1) */
writel(CLKSEL_DEFAULT | BIT(0), CLKSEL);
return 0;
}
extern u8 __rom_end[];
extern u8 __ram_start[];
extern u8 __ram_end[];
/*
* Use mach_cpu_init() for .data section copy as board_early_init_f() will be
* too late: initf_dm() will use a value of "av_" variable from not yet
* initialized (by copy) area.
*/
int mach_cpu_init(void)
{
int offset;
/* Don't relocate U-Boot */
gd->flags |= GD_FLG_SKIP_RELOC;
/* Copy data from ROM to RAM */
u8 *src = __rom_end;
u8 *dst = __ram_start;
while (dst < __ram_end)
*dst++ = *src++;
/* Enable debug uart */
#define DEBUG_UART_BASE 0x80014000
#define DEBUG_UART_DLF_OFFSET 0xc0
write_aux_reg(DEBUG_UART_BASE + DEBUG_UART_DLF_OFFSET, 1);
offset = fdt_path_offset(gd->fdt_blob, "/cpu_card/core_clk");
if (offset < 0)
return offset;
gd->cpu_clk = fdtdec_get_int(gd->fdt_blob, offset, "clock-frequency", 0);
if (!gd->cpu_clk)
return -EINVAL;
/* If CPU freq > 100 MHz, divide eFLASH clock by 2 */
if (gd->cpu_clk > 100000000) {
u32 reg = readl(AHBCKDIV);
reg &= ~(0xF << 8);
reg |= 2 << 8;
writel(reg, AHBCKDIV);
}
return set_cpu_freq(gd->cpu_clk);
}
#define ARC_PERIPHERAL_BASE 0xF0000000
#define SDIO_BASE (ARC_PERIPHERAL_BASE + 0xB000)
int board_mmc_init(bd_t *bis)
{
struct dwmci_host *host = NULL;
host = malloc(sizeof(struct dwmci_host));
if (!host) {
printf("dwmci_host malloc fail!\n");
return -ENOMEM;
}
memset(host, 0, sizeof(struct dwmci_host));
host->name = "Synopsys Mobile storage";
host->ioaddr = (void *)SDIO_BASE;
host->buswidth = 4;
host->dev_index = 0;
host->bus_hz = 50000000;
add_dwmci(host, host->bus_hz / 2, 400000);
return 0;
}
int board_mmc_getcd(struct mmc *mmc)
{
struct dwmci_host *host = mmc->priv;
return !(dwmci_readl(host, DWMCI_CDETECT) & 1);
}
#define IOTDK_RESET_SEQ 0x55AA6699
void reset_cpu(ulong addr)
{
writel(IOTDK_RESET_SEQ, RESET_REG);
}
int checkboard(void)
{
puts("Board: Synopsys IoT Development Kit\n");
return 0;
};
#ifdef CONFIG_DISPLAY_CPUINFO
int print_cpuinfo(void)
{
char mhz[8];
printf("CPU: ARC EM9D at %s MHz\n", strmhz(mhz, gd->cpu_clk));
return 0;
}
#endif /* CONFIG_DISPLAY_CPUINFO */
|
