blob: a4b963d463a659ef5ff4374d1c03bb8c0d9535a5 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Embest/Timll DevKit3250 board support
*
* Copyright (C) 2011-2015 Vladimir Zapolskiy <vz@mleia.com>
*/
#include <common.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/clk.h>
#include <asm/arch/cpu.h>
#include <asm/arch/emc.h>
#include <asm/arch/wdt.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
static struct emc_regs *emc = (struct emc_regs *)EMC_BASE;
static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
static struct wdt_regs *wdt = (struct wdt_regs *)WDT_BASE;
void reset_periph(void)
{
/* This function resets peripherals by triggering RESOUT_N */
setbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG);
writel(WDTIM_MCTRL_RESFRC1, &wdt->mctrl);
udelay(300);
writel(0, &wdt->mctrl);
clrbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG);
/* Such a long delay is needed to initialize SMSC phy */
udelay(10000);
}
int board_early_init_f(void)
{
lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART);
lpc32xx_i2c_init(1);
lpc32xx_i2c_init(2);
lpc32xx_ssp_init();
lpc32xx_mac_init();
/*
* nWP may be controlled by GPO19, but unpopulated by default R23
* makes no sense to configure this GPIO level, nWP is always high
*/
lpc32xx_slc_nand_init();
return 0;
}
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
#ifdef CONFIG_SYS_FLASH_CFI
/* Use 16-bit memory interface for NOR Flash */
emc->stat[0].config = EMC_STAT_CONFIG_PB | EMC_STAT_CONFIG_16BIT;
/* Change the NOR timings to optimum value to get maximum bandwidth */
emc->stat[0].waitwen = EMC_STAT_WAITWEN(1);
emc->stat[0].waitoen = EMC_STAT_WAITOEN(0);
emc->stat[0].waitrd = EMC_STAT_WAITRD(12);
emc->stat[0].waitpage = EMC_STAT_WAITPAGE(12);
emc->stat[0].waitwr = EMC_STAT_WAITWR(5);
emc->stat[0].waitturn = EMC_STAT_WAITTURN(2);
#endif
return 0;
}
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);
return 0;
}
|
