1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2012 Freescale Semiconductor, Inc.
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*
* Copyright (C) 2013, 2014 TQ Systems (ported SabreSD to TQMa6x)
* Author: Markus Niebel <markus.niebel@tq-group.com>
*
* Copyright (C) 2015 Stefan Roese <sr@denx.de>
*/
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/mx6-pins.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/sys_proto.h>
#include <linux/errno.h>
#include <asm/gpio.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <common.h>
#include <fsl_esdhc.h>
#include <linux/libfdt.h>
#include <malloc.h>
#include <i2c.h>
#include <micrel.h>
#include <miiphy.h>
#include <mmc.h>
#include <netdev.h>
#include "tqma6_bb.h"
/* UART */
#define UART4_PAD_CTRL ( \
PAD_CTL_HYS | \
PAD_CTL_PUS_100K_UP | \
PAD_CTL_PUE | \
PAD_CTL_PKE | \
PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_SLOW \
)
static iomux_v3_cfg_t const uart4_pads[] = {
NEW_PAD_CTRL(MX6_PAD_CSI0_DAT17__UART4_CTS_B, UART4_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_CSI0_DAT16__UART4_RTS_B, UART4_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_CSI0_DAT13__UART4_RX_DATA, UART4_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_CSI0_DAT12__UART4_TX_DATA, UART4_PAD_CTRL),
};
static void setup_iomuxc_uart4(void)
{
imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
}
/* MMC */
#define USDHC2_PAD_CTRL ( \
PAD_CTL_HYS | \
PAD_CTL_PUS_47K_UP | \
PAD_CTL_SPEED_LOW | \
PAD_CTL_DSE_80ohm | \
PAD_CTL_SRE_FAST \
)
#define USDHC2_CLK_PAD_CTRL ( \
PAD_CTL_HYS | \
PAD_CTL_PUS_47K_UP | \
PAD_CTL_SPEED_LOW | \
PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_FAST \
)
static iomux_v3_cfg_t const usdhc2_pads[] = {
NEW_PAD_CTRL(MX6_PAD_SD2_CLK__SD2_CLK, USDHC2_CLK_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD2_CMD__SD2_CMD, USDHC2_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD2_DAT0__SD2_DATA0, USDHC2_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD2_DAT1__SD2_DATA1, USDHC2_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD2_DAT2__SD2_DATA2, USDHC2_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD2_DAT3__SD2_DATA3, USDHC2_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_GPIO_4__GPIO1_IO04, USDHC2_PAD_CTRL), /* CD */
NEW_PAD_CTRL(MX6_PAD_GPIO_2__SD2_WP, USDHC2_PAD_CTRL), /* WP */
};
#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4)
#define USDHC2_WP_GPIO IMX_GPIO_NR(1, 2)
static struct fsl_esdhc_cfg usdhc2_cfg = {
.esdhc_base = USDHC2_BASE_ADDR,
.max_bus_width = 4,
};
int tqma6_bb_board_mmc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
int ret = 0;
if (cfg->esdhc_base == USDHC2_BASE_ADDR)
ret = !gpio_get_value(USDHC2_CD_GPIO);
return ret;
}
int tqma6_bb_board_mmc_getwp(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
int ret = 0;
if (cfg->esdhc_base == USDHC2_BASE_ADDR)
ret = gpio_get_value(USDHC2_WP_GPIO);
return ret;
}
int tqma6_bb_board_mmc_init(bd_t *bis)
{
int ret;
imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
ret = gpio_request(USDHC2_CD_GPIO, "mmc-cd");
if (!ret)
gpio_direction_input(USDHC2_CD_GPIO);
ret = gpio_request(USDHC2_WP_GPIO, "mmc-wp");
if (!ret)
gpio_direction_input(USDHC2_WP_GPIO);
usdhc2_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
if(fsl_esdhc_initialize(bis, &usdhc2_cfg))
puts("WARNING: failed to initialize SD\n");
return 0;
}
/* Ethernet */
#define ENET_PAD_CTRL ( \
PAD_CTL_HYS | \
PAD_CTL_PUS_100K_UP | \
PAD_CTL_PUE | \
PAD_CTL_PKE | \
PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_SLOW \
)
static iomux_v3_cfg_t const enet_pads[] = {
NEW_PAD_CTRL(MX6_PAD_ENET_MDC__ENET_MDC, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_ENET_MDIO__ENET_MDIO, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_GPIO_16__ENET_REF_CLK, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_ENET_RXD0__ENET_RX_DATA0, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_ENET_RXD1__ENET_RX_DATA1, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_ENET_CRS_DV__ENET_RX_EN, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_ENET_RX_ER__ENET_RX_ER, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_ENET_TXD0__ENET_TX_DATA0, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_ENET_TXD1__ENET_TX_DATA1, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_ENET_TX_EN__ENET_TX_EN, ENET_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_GPIO_19__ENET_TX_ER, ENET_PAD_CTRL),
/* ENET1 reset */
NEW_PAD_CTRL(MX6_PAD_GPIO_8__GPIO1_IO08, ENET_PAD_CTRL),
/* ENET1 interrupt */
NEW_PAD_CTRL(MX6_PAD_GPIO_9__GPIO1_IO09, ENET_PAD_CTRL),
};
#define ENET_PHY_RESET_GPIO IMX_GPIO_NR(1, 8)
static void setup_iomuxc_enet(void)
{
int ret;
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
/* Reset LAN8720 PHY */
ret = gpio_request(ENET_PHY_RESET_GPIO, "phy-reset");
if (!ret)
gpio_direction_output(ENET_PHY_RESET_GPIO , 0);
udelay(25000);
gpio_set_value(ENET_PHY_RESET_GPIO, 1);
}
int board_eth_init(bd_t *bis)
{
return cpu_eth_init(bis);
}
/* GPIO */
#define GPIO_PAD_CTRL ( \
PAD_CTL_HYS | \
PAD_CTL_PUS_100K_UP | \
PAD_CTL_PUE | \
PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_SLOW \
)
#define GPIO_OD_PAD_CTRL ( \
PAD_CTL_HYS | \
PAD_CTL_PUS_100K_UP | \
PAD_CTL_PUE | \
PAD_CTL_ODE | \
PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_SLOW \
)
static iomux_v3_cfg_t const gpio_pads[] = {
/* USB_H_PWR */
NEW_PAD_CTRL(MX6_PAD_GPIO_0__GPIO1_IO00, GPIO_PAD_CTRL),
/* USB_OTG_PWR */
NEW_PAD_CTRL(MX6_PAD_EIM_D22__GPIO3_IO22, GPIO_PAD_CTRL),
/* PCIE_RST */
NEW_PAD_CTRL(MX6_PAD_NANDF_CLE__GPIO6_IO07, GPIO_OD_PAD_CTRL),
/* UART1_PWRON */
NEW_PAD_CTRL(MX6_PAD_DISP0_DAT14__GPIO5_IO08, GPIO_PAD_CTRL),
/* UART2_PWRON */
NEW_PAD_CTRL(MX6_PAD_DISP0_DAT16__GPIO5_IO10, GPIO_PAD_CTRL),
/* UART3_PWRON */
NEW_PAD_CTRL(MX6_PAD_DISP0_DAT18__GPIO5_IO12, GPIO_PAD_CTRL),
};
#define GPIO_USB_H_PWR IMX_GPIO_NR(1, 0)
#define GPIO_USB_OTG_PWR IMX_GPIO_NR(3, 22)
#define GPIO_PCIE_RST IMX_GPIO_NR(6, 7)
#define GPIO_UART1_PWRON IMX_GPIO_NR(5, 8)
#define GPIO_UART2_PWRON IMX_GPIO_NR(5, 10)
#define GPIO_UART3_PWRON IMX_GPIO_NR(5, 12)
static void gpio_init(void)
{
int ret;
imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
ret = gpio_request(GPIO_USB_H_PWR, "usb-h-pwr");
if (!ret)
gpio_direction_output(GPIO_USB_H_PWR, 1);
ret = gpio_request(GPIO_USB_OTG_PWR, "usb-otg-pwr");
if (!ret)
gpio_direction_output(GPIO_USB_OTG_PWR, 1);
ret = gpio_request(GPIO_PCIE_RST, "pcie-reset");
if (!ret)
gpio_direction_output(GPIO_PCIE_RST, 1);
ret = gpio_request(GPIO_UART1_PWRON, "uart1-pwr");
if (!ret)
gpio_direction_output(GPIO_UART1_PWRON, 0);
ret = gpio_request(GPIO_UART2_PWRON, "uart2-pwr");
if (!ret)
gpio_direction_output(GPIO_UART2_PWRON, 0);
ret = gpio_request(GPIO_UART3_PWRON, "uart3-pwr");
if (!ret)
gpio_direction_output(GPIO_UART3_PWRON, 0);
}
void tqma6_iomuxc_spi(void)
{
/* No SPI on this baseboard */
}
int tqma6_bb_board_early_init_f(void)
{
setup_iomuxc_uart4();
return 0;
}
int tqma6_bb_board_init(void)
{
setup_iomuxc_enet();
gpio_init();
/* Turn the UART-couplers on one-after-another */
gpio_set_value(GPIO_UART1_PWRON, 1);
mdelay(10);
gpio_set_value(GPIO_UART2_PWRON, 1);
mdelay(10);
gpio_set_value(GPIO_UART3_PWRON, 1);
return 0;
}
int tqma6_bb_board_late_init(void)
{
return 0;
}
const char *tqma6_bb_get_boardname(void)
{
return "WRU-IV";
}
static const struct boot_mode board_boot_modes[] = {
/* 4 bit bus width */
{"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
/* 8 bit bus width */
{"emmc", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
{ NULL, 0 },
};
int misc_init_r(void)
{
add_board_boot_modes(board_boot_modes);
return 0;
}
#define WRU4_USB_H1_PWR IMX_GPIO_NR(1, 0)
#define WRU4_USB_OTG_PWR IMX_GPIO_NR(3, 22)
int board_ehci_hcd_init(int port)
{
int ret;
ret = gpio_request(WRU4_USB_H1_PWR, "usb-h1-pwr");
if (!ret)
gpio_direction_output(WRU4_USB_H1_PWR, 1);
ret = gpio_request(WRU4_USB_OTG_PWR, "usb-OTG-pwr");
if (!ret)
gpio_direction_output(WRU4_USB_OTG_PWR, 1);
return 0;
}
int board_ehci_power(int port, int on)
{
if (port)
gpio_set_value(WRU4_USB_OTG_PWR, on);
else
gpio_set_value(WRU4_USB_H1_PWR, on);
return 0;
}
/*
* Device Tree Support
*/
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
void tqma6_bb_ft_board_setup(void *blob, bd_t *bd)
{
/* TBD */
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
|
