blob: be5d51cc19ae245496c1aeddae63027bd7eac32e (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
|
Intel x86 PINCTRL/GPIO controller
Pin-muxing on x86 can be described with a node for the PINCTRL master
node and a set of child nodes for each pin on the SoC.
The PINCTRL master node requires the following properties:
- compatible : "intel,x86-pinctrl"
Pin nodes must be children of the pinctrl master node and can
contain the following properties:
- pad-offset - (required) offset in the IOBASE for the pin to configured.
- gpio-offset - (required) offset in the GPIOBASE for the pin to configured and
also the bit shift in this register.
- mode-gpio - (optional) standalone property to force the pin into GPIO mode.
- mode-func - (optional) function number to assign to the pin. if 'mode-gpio'
is set, this property will be ignored.
in case of 'mode-gpio' property set:
- output-value - (optional) this set the default output value of the GPIO.
- direction - (optional) this set the direction of the gpio.
- pull-str - (optional) this set the pull strength of the pin.
- pull-assign - (optional) this set the pull assignement (up/down) of the pin.
- invert - (optional) this input pin is inverted
Example:
pin_usb_host_en0@0 {
gpio-offset = <0x80 8>;
pad-offset = <0x260>;
mode-gpio;
output-value = <1>;
direction = <PIN_OUTPUT>;
};
|