blob: 371a7fec0aac28a75cec0a778dc314ea9aa149d5 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
|
ST STiH407 USB PHY controller
This file documents the dt bindings for the usb picoPHY driver which is the PHY for both USB2 and USB3
host controllers (when controlling usb2/1.1 devices) available on STiH407 SoC family from STMicroelectronics.
Required properties:
- compatible : should be "st,stih407-usb2-phy"
- st,syscfg : phandle of sysconfig bank plus integer array containing phyparam and phyctrl register offsets
- resets : list of phandle and reset specifier pairs. There should be two entries, one
for the whole phy and one for the port
- reset-names : list of reset signal names. Should be "global" and "port"
See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
See: Documentation/devicetree/bindings/reset/reset.txt
Example:
usb2_picophy0: usbpicophy {
compatible = "st,stih407-usb2-phy";
#phy-cells = <0>;
st,syscfg = <&syscfg_core 0x100 0xf4>;
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
<&picophyreset STIH407_PICOPHY0_RESET>;
reset-names = "global", "port";
};
|
