1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2018-2019 NXP
*/
#include <common.h>
#include <errno.h>
#include <asm/io.h>
#include <asm/arch/ddr.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
void ddr_cfg_umctl2(struct dram_cfg_param *ddrc_cfg, int num)
{
int i = 0;
for (i = 0; i < num; i++) {
reg32_write(ddrc_cfg->reg, ddrc_cfg->val);
ddrc_cfg++;
}
}
void ddr_init(struct dram_timing_info *dram_timing)
{
unsigned int tmp, initial_drate, target_freq;
printf("DDRINFO: start DRAM init\n");
/* Step1: Follow the power up procedure */
if (is_imx8mq()) {
reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F00000F);
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F);
reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F000000);
} else {
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00001F);
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F);
}
debug("DDRINFO: cfg clk\n");
/* change the clock source of dram_apb_clk_root: source 4 800MHz /4 = 200MHz */
clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(4) |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV4));
/* disable iso */
reg32_write(0x303A00EC, 0x0000ffff); /* PGC_CPU_MAPPING */
reg32setbit(0x303A00F8, 5); /* PU_PGC_SW_PUP_REQ */
initial_drate = dram_timing->fsp_msg[0].drate;
/* default to the frequency point 0 clock */
ddrphy_init_set_dfi_clk(initial_drate);
/* D-aasert the presetn */
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000006);
/* Step2: Program the dwc_ddr_umctl2 registers */
debug("DDRINFO: ddrc config start\n");
ddr_cfg_umctl2(dram_timing->ddrc_cfg, dram_timing->ddrc_cfg_num);
debug("DDRINFO: ddrc config done\n");
/* Step3: De-assert reset signal(core_ddrc_rstn & aresetn_n) */
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000004);
reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000000);
/*
* Step4: Disable auto-refreshes, self-refresh, powerdown, and
* assertion of dfi_dram_clk_disable by setting RFSHCTL3.dis_auto_refresh = 1,
* PWRCTL.powerdown_en = 0, and PWRCTL.selfref_en = 0, PWRCTL.en_dfi_dram_clk_disable = 0
*/
reg32_write(DDRC_DBG1(0), 0x00000000);
reg32_write(DDRC_RFSHCTL3(0), 0x0000001);
reg32_write(DDRC_PWRCTL(0), 0xa0);
/* if ddr type is LPDDR4, do it */
tmp = reg32_read(DDRC_MSTR(0));
if (tmp & (0x1 << 5))
reg32_write(DDRC_DDR_SS_GPR0, 0x01); /* LPDDR4 mode */
/* determine the initial boot frequency */
target_freq = reg32_read(DDRC_MSTR2(0)) & 0x3;
target_freq = (tmp & (0x1 << 29)) ? target_freq : 0x0;
/* Step5: Set SWCT.sw_done to 0 */
reg32_write(DDRC_SWCTL(0), 0x00000000);
/* Set the default boot frequency point */
clrsetbits_le32(DDRC_DFIMISC(0), (0x1f << 8), target_freq << 8);
/* Step6: Set DFIMISC.dfi_init_complete_en to 0 */
clrbits_le32(DDRC_DFIMISC(0), 0x1);
/* Step7: Set SWCTL.sw_done to 1; need to polling SWSTAT.sw_done_ack */
reg32_write(DDRC_SWCTL(0), 0x00000001);
do {
tmp = reg32_read(DDRC_SWSTAT(0));
} while ((tmp & 0x1) == 0x0);
/*
* Step8 ~ Step13: Start PHY initialization and training by
* accessing relevant PUB registers
*/
debug("DDRINFO:ddrphy config start\n");
ddr_cfg_phy(dram_timing);
debug("DDRINFO: ddrphy config done\n");
/*
* step14 CalBusy.0 =1, indicates the calibrator is actively
* calibrating. Wait Calibrating done.
*/
do {
tmp = reg32_read(DDRPHY_CalBusy(0));
} while ((tmp & 0x1));
printf("DDRINFO:ddrphy calibration done\n");
/* Step15: Set SWCTL.sw_done to 0 */
reg32_write(DDRC_SWCTL(0), 0x00000000);
/* Step16: Set DFIMISC.dfi_init_start to 1 */
setbits_le32(DDRC_DFIMISC(0), (0x1 << 5));
/* Step17: Set SWCTL.sw_done to 1; need to polling SWSTAT.sw_done_ack */
reg32_write(DDRC_SWCTL(0), 0x00000001);
do {
tmp = reg32_read(DDRC_SWSTAT(0));
} while ((tmp & 0x1) == 0x0);
/* Step18: Polling DFISTAT.dfi_init_complete = 1 */
do {
tmp = reg32_read(DDRC_DFISTAT(0));
} while ((tmp & 0x1) == 0x0);
/* Step19: Set SWCTL.sw_done to 0 */
reg32_write(DDRC_SWCTL(0), 0x00000000);
/* Step20: Set DFIMISC.dfi_init_start to 0 */
clrbits_le32(DDRC_DFIMISC(0), (0x1 << 5));
/* Step21: optional */
/* Step22: Set DFIMISC.dfi_init_complete_en to 1 */
setbits_le32(DDRC_DFIMISC(0), 0x1);
/* Step23: Set PWRCTL.selfref_sw to 0 */
clrbits_le32(DDRC_PWRCTL(0), (0x1 << 5));
/* Step24: Set SWCTL.sw_done to 1; need polling SWSTAT.sw_done_ack */
reg32_write(DDRC_SWCTL(0), 0x00000001);
do {
tmp = reg32_read(DDRC_SWSTAT(0));
} while ((tmp & 0x1) == 0x0);
/* Step25: Wait for dwc_ddr_umctl2 to move to normal operating mode by monitoring
* STAT.operating_mode signal */
do {
tmp = reg32_read(DDRC_STAT(0));
} while ((tmp & 0x3) != 0x1);
/* Step26: Set back register in Step4 to the original values if desired */
reg32_write(DDRC_RFSHCTL3(0), 0x0000000);
/* enable selfref_en by default */
setbits_le32(DDRC_PWRCTL(0), 0x1 << 3);
/* enable port 0 */
reg32_write(DDRC_PCTRL_0(0), 0x00000001);
printf("DDRINFO: ddrmix config done\n");
/* save the dram timing config into memory */
dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE);
}
|