1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
*
* Derived from linux/arch/mips/bcm63xx/usb-common.c:
* Copyright 2008 Maxime Bizon <mbizon@freebox.fr>
* Copyright 2013 Florian Fainelli <florian@openwrt.org>
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <generic-phy.h>
#include <malloc.h>
#include <power-domain.h>
#include <reset.h>
#include <asm/io.h>
#include <dm/device.h>
/* USBH PLL Control register */
#define USBH_PLL_REG 0x18
#define USBH_PLL_IDDQ_PWRDN BIT(9)
#define USBH_PLL_PWRDN_DELAY BIT(10)
/* USBH Swap Control register */
#define USBH_SWAP_REG 0x1c
#define USBH_SWAP_OHCI_DATA BIT(0)
#define USBH_SWAP_OHCI_ENDIAN BIT(1)
#define USBH_SWAP_EHCI_DATA BIT(3)
#define USBH_SWAP_EHCI_ENDIAN BIT(4)
/* USBH Setup register */
#define USBH_SETUP_REG 0x28
#define USBH_SETUP_IOC BIT(4)
#define USBH_SETUP_IPP BIT(5)
struct bcm6368_usbh_hw {
uint32_t setup_clr;
uint32_t pll_clr;
};
struct bcm6368_usbh_priv {
const struct bcm6368_usbh_hw *hw;
void __iomem *regs;
};
static int bcm6368_usbh_init(struct phy *phy)
{
struct bcm6368_usbh_priv *priv = dev_get_priv(phy->dev);
const struct bcm6368_usbh_hw *hw = priv->hw;
/* configure to work in native cpu endian */
clrsetbits_be32(priv->regs + USBH_SWAP_REG,
USBH_SWAP_EHCI_ENDIAN | USBH_SWAP_OHCI_ENDIAN,
USBH_SWAP_EHCI_DATA | USBH_SWAP_OHCI_DATA);
/* setup config */
if (hw->setup_clr)
clrbits_be32(priv->regs + USBH_SETUP_REG, hw->setup_clr);
setbits_be32(priv->regs + USBH_SETUP_REG, USBH_SETUP_IOC);
/* enable pll control */
if (hw->pll_clr)
clrbits_be32(priv->regs + USBH_PLL_REG, hw->pll_clr);
return 0;
}
static struct phy_ops bcm6368_usbh_ops = {
.init = bcm6368_usbh_init,
};
static const struct bcm6368_usbh_hw bcm6328_hw = {
.pll_clr = USBH_PLL_IDDQ_PWRDN | USBH_PLL_PWRDN_DELAY,
.setup_clr = 0,
};
static const struct bcm6368_usbh_hw bcm6362_hw = {
.pll_clr = 0,
.setup_clr = 0,
};
static const struct bcm6368_usbh_hw bcm6368_hw = {
.pll_clr = 0,
.setup_clr = 0,
};
static const struct bcm6368_usbh_hw bcm63268_hw = {
.pll_clr = USBH_PLL_IDDQ_PWRDN | USBH_PLL_PWRDN_DELAY,
.setup_clr = USBH_SETUP_IPP,
};
static const struct udevice_id bcm6368_usbh_ids[] = {
{
.compatible = "brcm,bcm6328-usbh",
.data = (ulong)&bcm6328_hw,
}, {
.compatible = "brcm,bcm6362-usbh",
.data = (ulong)&bcm6362_hw,
}, {
.compatible = "brcm,bcm6368-usbh",
.data = (ulong)&bcm6368_hw,
}, {
.compatible = "brcm,bcm63268-usbh",
.data = (ulong)&bcm63268_hw,
}, { /* sentinel */ }
};
static int bcm6368_usbh_probe(struct udevice *dev)
{
struct bcm6368_usbh_priv *priv = dev_get_priv(dev);
const struct bcm6368_usbh_hw *hw =
(const struct bcm6368_usbh_hw *)dev_get_driver_data(dev);
#if defined(CONFIG_POWER_DOMAIN)
struct power_domain pwr_dom;
#endif
struct reset_ctl rst_ctl;
struct clk clk;
int ret;
priv->regs = dev_remap_addr(dev);
if (!priv->regs)
return -EINVAL;
priv->hw = hw;
/* enable usbh clock */
ret = clk_get_by_name(dev, "usbh", &clk);
if (ret < 0)
return ret;
ret = clk_enable(&clk);
if (ret < 0)
return ret;
ret = clk_free(&clk);
if (ret < 0)
return ret;
#if defined(CONFIG_POWER_DOMAIN)
/* enable power domain */
ret = power_domain_get(dev, &pwr_dom);
if (ret < 0)
return ret;
ret = power_domain_on(&pwr_dom);
if (ret < 0)
return ret;
ret = power_domain_free(&pwr_dom);
if (ret < 0)
return ret;
#endif
/* perform reset */
ret = reset_get_by_index(dev, 0, &rst_ctl);
if (ret < 0)
return ret;
ret = reset_deassert(&rst_ctl);
if (ret < 0)
return ret;
ret = reset_free(&rst_ctl);
if (ret < 0)
return ret;
/* enable usb_ref clock */
ret = clk_get_by_name(dev, "usb_ref", &clk);
if (!ret) {
ret = clk_enable(&clk);
if (ret < 0)
return ret;
ret = clk_free(&clk);
if (ret < 0)
return ret;
}
mdelay(100);
return 0;
}
U_BOOT_DRIVER(bcm6368_usbh) = {
.name = "bcm6368-usbh",
.id = UCLASS_PHY,
.of_match = bcm6368_usbh_ids,
.ops = &bcm6368_usbh_ops,
.priv_auto_alloc_size = sizeof(struct bcm6368_usbh_priv),
.probe = bcm6368_usbh_probe,
};
|
