1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Meson G12A USB2 PHY driver
*
* Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* Copyright (C) 2019 BayLibre, SAS
* Author: Neil Armstrong <narmstron@baylibre.com>
*/
#include <common.h>
#include <asm/io.h>
#include <bitfield.h>
#include <dm.h>
#include <errno.h>
#include <generic-phy.h>
#include <regmap.h>
#include <power/regulator.h>
#include <reset.h>
#include <clk.h>
#include <linux/bitops.h>
#include <linux/compat.h>
#define PHY_CTRL_R0 0x0
#define PHY_CTRL_R1 0x4
#define PHY_CTRL_R2 0x8
#define PHY_CTRL_R3 0xc
#define PHY_CTRL_R4 0x10
#define PHY_CTRL_R5 0x14
#define PHY_CTRL_R6 0x18
#define PHY_CTRL_R7 0x1c
#define PHY_CTRL_R8 0x20
#define PHY_CTRL_R9 0x24
#define PHY_CTRL_R10 0x28
#define PHY_CTRL_R11 0x2c
#define PHY_CTRL_R12 0x30
#define PHY_CTRL_R13 0x34
#define PHY_CTRL_R14 0x38
#define PHY_CTRL_R15 0x3c
#define PHY_CTRL_R16 0x40
#define PHY_CTRL_R17 0x44
#define PHY_CTRL_R18 0x48
#define PHY_CTRL_R19 0x4c
#define PHY_CTRL_R20 0x50
#define PHY_CTRL_R21 0x54
#define PHY_CTRL_R22 0x58
#define PHY_CTRL_R23 0x5c
#define RESET_COMPLETE_TIME 1000
#define PLL_RESET_COMPLETE_TIME 100
struct phy_meson_g12a_usb2_priv {
struct regmap *regmap;
#if CONFIG_IS_ENABLED(DM_REGULATOR)
struct udevice *phy_supply;
#endif
#if CONFIG_IS_ENABLED(CLK)
struct clk clk;
#endif
struct reset_ctl reset;
};
static int phy_meson_g12a_usb2_power_on(struct phy *phy)
{
struct udevice *dev = phy->dev;
struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
#if CONFIG_IS_ENABLED(DM_REGULATOR)
if (priv->phy_supply) {
int ret = regulator_set_enable(priv->phy_supply, true);
if (ret)
return ret;
}
#endif
return 0;
}
static int phy_meson_g12a_usb2_power_off(struct phy *phy)
{
struct udevice *dev = phy->dev;
struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
#if CONFIG_IS_ENABLED(DM_REGULATOR)
if (priv->phy_supply) {
int ret = regulator_set_enable(priv->phy_supply, false);
if (ret) {
pr_err("Error disabling PHY supply\n");
return ret;
}
}
#endif
return 0;
}
static int phy_meson_g12a_usb2_init(struct phy *phy)
{
struct udevice *dev = phy->dev;
struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
int ret;
ret = reset_assert(&priv->reset);
udelay(1);
ret |= reset_deassert(&priv->reset);
if (ret)
return ret;
udelay(RESET_COMPLETE_TIME);
/* usb2_otg_aca_en == 0 */
regmap_update_bits(priv->regmap, PHY_CTRL_R21, BIT(2), 0);
/* PLL Setup : 24MHz * 20 / 1 = 480MHz */
regmap_write(priv->regmap, PHY_CTRL_R16, 0x39400414);
regmap_write(priv->regmap, PHY_CTRL_R17, 0x927e0000);
regmap_write(priv->regmap, PHY_CTRL_R18, 0xac5f49e5);
udelay(PLL_RESET_COMPLETE_TIME);
/* UnReset PLL */
regmap_write(priv->regmap, PHY_CTRL_R16, 0x19400414);
/* PHY Tuning */
regmap_write(priv->regmap, PHY_CTRL_R20, 0xfe18);
regmap_write(priv->regmap, PHY_CTRL_R4, 0x8000fff);
/* Tuning Disconnect Threshold */
regmap_write(priv->regmap, PHY_CTRL_R3, 0x34);
/* Analog Settings */
regmap_write(priv->regmap, PHY_CTRL_R14, 0);
regmap_write(priv->regmap, PHY_CTRL_R13, 0x78000);
return 0;
}
static int phy_meson_g12a_usb2_exit(struct phy *phy)
{
struct udevice *dev = phy->dev;
struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
int ret;
ret = reset_assert(&priv->reset);
if (ret)
return ret;
return 0;
}
struct phy_ops meson_g12a_usb2_phy_ops = {
.init = phy_meson_g12a_usb2_init,
.exit = phy_meson_g12a_usb2_exit,
.power_on = phy_meson_g12a_usb2_power_on,
.power_off = phy_meson_g12a_usb2_power_off,
};
int meson_g12a_usb2_phy_probe(struct udevice *dev)
{
struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
int ret;
ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
if (ret)
return ret;
ret = reset_get_by_index(dev, 0, &priv->reset);
if (ret == -ENOTSUPP)
return 0;
else if (ret)
return ret;
ret = reset_deassert(&priv->reset);
if (ret) {
reset_release_all(&priv->reset, 1);
return ret;
}
#if CONFIG_IS_ENABLED(CLK)
ret = clk_get_by_index(dev, 0, &priv->clk);
if (ret < 0)
return ret;
ret = clk_enable(&priv->clk);
if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
pr_err("failed to enable PHY clock\n");
clk_free(&priv->clk);
return ret;
}
#endif
#if CONFIG_IS_ENABLED(DM_REGULATOR)
ret = device_get_supply_regulator(dev, "phy-supply", &priv->phy_supply);
if (ret && ret != -ENOENT) {
pr_err("Failed to get PHY regulator\n");
return ret;
}
#endif
return 0;
}
static const struct udevice_id meson_g12a_usb2_phy_ids[] = {
{ .compatible = "amlogic,g12a-usb2-phy" },
{ }
};
U_BOOT_DRIVER(meson_g12a_usb2_phy) = {
.name = "meson_g12a_usb2_phy",
.id = UCLASS_PHY,
.of_match = meson_g12a_usb2_phy_ids,
.probe = meson_g12a_usb2_phy_probe,
.ops = &meson_g12a_usb2_phy_ops,
.priv_auto_alloc_size = sizeof(struct phy_meson_g12a_usb2_priv),
};
|
