1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Peng Fan <van.freenix@gmail.com>
*/
#include <common.h>
#include <malloc.h>
#include <mapmem.h>
#include <dm/device_compat.h>
#include <dm/devres.h>
#include <linux/io.h>
#include <linux/err.h>
#include <dm.h>
#include <dm/pinctrl.h>
#include "pinctrl-imx.h"
DECLARE_GLOBAL_DATA_PTR;
static int imx_pinctrl_set_state(struct udevice *dev, struct udevice *config)
{
struct imx_pinctrl_priv *priv = dev_get_priv(dev);
struct imx_pinctrl_soc_info *info = priv->info;
int node = dev_of_offset(config);
const struct fdt_property *prop;
u32 *pin_data;
int npins, size, pin_size;
int mux_reg, conf_reg, input_reg;
u32 input_val, mux_mode, config_val;
u32 mux_shift = info->mux_mask ? ffs(info->mux_mask) - 1 : 0;
int i, j = 0;
dev_dbg(dev, "%s: %s\n", __func__, config->name);
if (info->flags & IMX8_USE_SCU)
pin_size = SHARE_IMX8_PIN_SIZE;
else if (info->flags & SHARE_MUX_CONF_REG)
pin_size = SHARE_FSL_PIN_SIZE;
else
pin_size = FSL_PIN_SIZE;
prop = fdt_getprop(gd->fdt_blob, node, "fsl,pins", &size);
if (!prop) {
dev_err(dev, "No fsl,pins property in node %s\n", config->name);
return -EINVAL;
}
if (!size || size % pin_size) {
dev_err(dev, "Invalid fsl,pins property in node %s\n",
config->name);
return -EINVAL;
}
pin_data = devm_kzalloc(dev, size, 0);
if (!pin_data)
return -ENOMEM;
if (fdtdec_get_int_array(gd->fdt_blob, node, "fsl,pins",
pin_data, size >> 2)) {
dev_err(dev, "Error reading pin data.\n");
devm_kfree(dev, pin_data);
return -EINVAL;
}
npins = size / pin_size;
if (info->flags & IMX8_USE_SCU) {
imx_pinctrl_scu_conf_pins(info, pin_data, npins);
} else {
/*
* Refer to linux documentation for details:
* Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
*/
for (i = 0; i < npins; i++) {
mux_reg = pin_data[j++];
if (!(info->flags & ZERO_OFFSET_VALID) && !mux_reg)
mux_reg = -1;
if (info->flags & SHARE_MUX_CONF_REG) {
conf_reg = mux_reg;
} else {
conf_reg = pin_data[j++];
if (!(info->flags & ZERO_OFFSET_VALID) &&
!conf_reg)
conf_reg = -1;
}
if ((mux_reg == -1) || (conf_reg == -1)) {
dev_err(dev, "Error mux_reg or conf_reg\n");
devm_kfree(dev, pin_data);
return -EINVAL;
}
input_reg = pin_data[j++];
mux_mode = pin_data[j++];
input_val = pin_data[j++];
config_val = pin_data[j++];
dev_dbg(dev, "mux_reg 0x%x, conf_reg 0x%x, "
"input_reg 0x%x, mux_mode 0x%x, "
"input_val 0x%x, config_val 0x%x\n",
mux_reg, conf_reg, input_reg, mux_mode,
input_val, config_val);
if (config_val & IMX_PAD_SION)
mux_mode |= IOMUXC_CONFIG_SION;
config_val &= ~IMX_PAD_SION;
/* Set Mux */
if (info->flags & SHARE_MUX_CONF_REG) {
clrsetbits_le32(info->base + mux_reg,
info->mux_mask,
mux_mode << mux_shift);
} else {
writel(mux_mode, info->base + mux_reg);
}
dev_dbg(dev, "write mux: offset 0x%x val 0x%x\n",
mux_reg, mux_mode);
/*
* Set select input
*
* If the select input value begins with 0xff,
* it's a quirky select input and the value should
* be interpreted as below.
* 31 23 15 7 0
* | 0xff | shift | width | select |
* It's used to work around the problem that the
* select input for some pin is not implemented in
* the select input register but in some general
* purpose register. We encode the select input
* value, width and shift of the bit field into
* input_val cell of pin function ID in device tree,
* and then decode them here for setting up the select
* input bits in general purpose register.
*/
if (input_val >> 24 == 0xff) {
u32 val = input_val;
u8 select = val & 0xff;
u8 width = (val >> 8) & 0xff;
u8 shift = (val >> 16) & 0xff;
u32 mask = ((1 << width) - 1) << shift;
/*
* The input_reg[i] here is actually some
* IOMUXC general purpose register, not
* regular select input register.
*/
val = readl(info->base + input_reg);
val &= ~mask;
val |= select << shift;
writel(val, info->base + input_reg);
} else if (input_reg) {
/*
* Regular select input register can never be
* at offset 0, and we only print register
* value for regular case.
*/
if (info->input_sel_base)
writel(input_val,
info->input_sel_base +
input_reg);
else
writel(input_val,
info->base + input_reg);
dev_dbg(dev, "select_input: offset 0x%x val "
"0x%x\n", input_reg, input_val);
}
/* Set config */
if (!(config_val & IMX_NO_PAD_CTL)) {
if (info->flags & SHARE_MUX_CONF_REG) {
clrsetbits_le32(info->base + conf_reg,
~info->mux_mask,
config_val);
} else {
writel(config_val,
info->base + conf_reg);
}
dev_dbg(dev, "write config: offset 0x%x val "
"0x%x\n", conf_reg, config_val);
}
}
}
devm_kfree(dev, pin_data);
return 0;
}
const struct pinctrl_ops imx_pinctrl_ops = {
.set_state = imx_pinctrl_set_state,
};
int imx_pinctrl_probe(struct udevice *dev,
struct imx_pinctrl_soc_info *info)
{
struct imx_pinctrl_priv *priv = dev_get_priv(dev);
int node = dev_of_offset(dev), ret;
struct fdtdec_phandle_args arg;
fdt_addr_t addr;
fdt_size_t size;
if (!info) {
dev_err(dev, "wrong pinctrl info\n");
return -EINVAL;
}
priv->dev = dev;
priv->info = info;
if (info->flags & IMX8_USE_SCU)
return 0;
addr = devfdt_get_addr_size_index(dev, 0, &size);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
info->base = map_sysmem(addr, size);
if (!info->base)
return -ENOMEM;
priv->info = info;
info->mux_mask = fdtdec_get_int(gd->fdt_blob, node, "fsl,mux_mask", 0);
/*
* Refer to linux documentation for details:
* Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
*/
if (fdtdec_get_bool(gd->fdt_blob, node, "fsl,input-sel")) {
ret = fdtdec_parse_phandle_with_args(gd->fdt_blob,
node, "fsl,input-sel",
NULL, 0, 0, &arg);
if (ret) {
dev_err(dev, "iomuxc fsl,input-sel property not found\n");
return -EINVAL;
}
addr = fdtdec_get_addr_size(gd->fdt_blob, arg.node, "reg",
&size);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
info->input_sel_base = map_sysmem(addr, size);
if (!info->input_sel_base)
return -ENOMEM;
}
dev_dbg(dev, "initialized IMX pinctrl driver\n");
return 0;
}
int imx_pinctrl_remove(struct udevice *dev)
{
struct imx_pinctrl_priv *priv = dev_get_priv(dev);
struct imx_pinctrl_soc_info *info = priv->info;
if (info->flags & IMX8_USE_SCU)
return 0;
if (info->input_sel_base)
unmap_sysmem(info->input_sel_base);
if (info->base)
unmap_sysmem(info->base);
return 0;
}
|