1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
|
/*
* (C) Copyright 2009-2012 ADVANSEE
* Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
*
* Based on the Linux rtc-imxdi.c driver, which is:
* Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2010 Orex Computed Radiography
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* Date & Time support for Freescale i.MX DryIce RTC
*/
#include <common.h>
#include <command.h>
#include <linux/compat.h>
#include <rtc.h>
#if defined(CONFIG_CMD_DATE)
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
/* DryIce Register Definitions */
struct imxdi_regs {
u32 dtcmr; /* Time Counter MSB Reg */
u32 dtclr; /* Time Counter LSB Reg */
u32 dcamr; /* Clock Alarm MSB Reg */
u32 dcalr; /* Clock Alarm LSB Reg */
u32 dcr; /* Control Reg */
u32 dsr; /* Status Reg */
u32 dier; /* Interrupt Enable Reg */
};
#define DCAMR_UNSET 0xFFFFFFFF /* doomsday - 1 sec */
#define DCR_TCE (1 << 3) /* Time Counter Enable */
#define DSR_WBF (1 << 10) /* Write Busy Flag */
#define DSR_WNF (1 << 9) /* Write Next Flag */
#define DSR_WCF (1 << 8) /* Write Complete Flag */
#define DSR_WEF (1 << 7) /* Write Error Flag */
#define DSR_CAF (1 << 4) /* Clock Alarm Flag */
#define DSR_NVF (1 << 1) /* Non-Valid Flag */
#define DSR_SVF (1 << 0) /* Security Violation Flag */
#define DIER_WNIE (1 << 9) /* Write Next Interrupt Enable */
#define DIER_WCIE (1 << 8) /* Write Complete Interrupt Enable */
#define DIER_WEIE (1 << 7) /* Write Error Interrupt Enable */
#define DIER_CAIE (1 << 4) /* Clock Alarm Interrupt Enable */
/* Driver Private Data */
struct imxdi_data {
struct imxdi_regs __iomem *regs;
int init_done;
};
static struct imxdi_data data;
/*
* This function attempts to clear the dryice write-error flag.
*
* A dryice write error is similar to a bus fault and should not occur in
* normal operation. Clearing the flag requires another write, so the root
* cause of the problem may need to be fixed before the flag can be cleared.
*/
static void clear_write_error(void)
{
int cnt;
puts("### Warning: RTC - Register write error!\n");
/* clear the write error flag */
__raw_writel(DSR_WEF, &data.regs->dsr);
/* wait for it to take effect */
for (cnt = 0; cnt < 1000; cnt++) {
if ((__raw_readl(&data.regs->dsr) & DSR_WEF) == 0)
return;
udelay(10);
}
puts("### Error: RTC - Cannot clear write-error flag!\n");
}
/*
* Write a dryice register and wait until it completes.
*
* Use interrupt flags to determine when the write has completed.
*/
#define DI_WRITE_WAIT(val, reg) \
( \
/* do the register write */ \
__raw_writel((val), &data.regs->reg), \
\
di_write_wait((val), #reg) \
)
static int di_write_wait(u32 val, const char *reg)
{
int cnt;
int ret = 0;
int rc = 0;
/* wait for the write to finish */
for (cnt = 0; cnt < 100; cnt++) {
if ((__raw_readl(&data.regs->dsr) & (DSR_WCF | DSR_WEF)) != 0) {
ret = 1;
break;
}
udelay(10);
}
if (ret == 0)
printf("### Warning: RTC - Write-wait timeout "
"val = 0x%.8x reg = %s\n", val, reg);
/* check for write error */
if (__raw_readl(&data.regs->dsr) & DSR_WEF) {
clear_write_error();
rc = -1;
}
return rc;
}
/*
* Initialize dryice hardware
*/
static int di_init(void)
{
int rc = 0;
data.regs = (struct imxdi_regs __iomem *)IMX_DRYICE_BASE;
/* mask all interrupts */
__raw_writel(0, &data.regs->dier);
/* put dryice into valid state */
if (__raw_readl(&data.regs->dsr) & DSR_NVF) {
rc = DI_WRITE_WAIT(DSR_NVF | DSR_SVF, dsr);
if (rc)
goto err;
}
/* initialize alarm */
rc = DI_WRITE_WAIT(DCAMR_UNSET, dcamr);
if (rc)
goto err;
rc = DI_WRITE_WAIT(0, dcalr);
if (rc)
goto err;
/* clear alarm flag */
if (__raw_readl(&data.regs->dsr) & DSR_CAF) {
rc = DI_WRITE_WAIT(DSR_CAF, dsr);
if (rc)
goto err;
}
/* the timer won't count if it has never been written to */
if (__raw_readl(&data.regs->dtcmr) == 0) {
rc = DI_WRITE_WAIT(0, dtcmr);
if (rc)
goto err;
}
/* start keeping time */
if (!(__raw_readl(&data.regs->dcr) & DCR_TCE)) {
rc = DI_WRITE_WAIT(__raw_readl(&data.regs->dcr) | DCR_TCE, dcr);
if (rc)
goto err;
}
data.init_done = 1;
return 0;
err:
return rc;
}
int rtc_get(struct rtc_time *tmp)
{
unsigned long now;
int rc = 0;
if (!data.init_done) {
rc = di_init();
if (rc)
goto err;
}
now = __raw_readl(&data.regs->dtcmr);
rtc_to_tm(now, tmp);
err:
return rc;
}
int rtc_set(struct rtc_time *tmp)
{
unsigned long now;
int rc;
if (!data.init_done) {
rc = di_init();
if (rc)
goto err;
}
now = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
/* zero the fractional part first */
rc = DI_WRITE_WAIT(0, dtclr);
if (rc == 0)
rc = DI_WRITE_WAIT(now, dtcmr);
err:
return rc;
}
void rtc_reset(void)
{
di_init();
}
#endif
|
