1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
|
/*
* (C) Copyright 2009 SAMSUNG Electronics
* Minkyu Kang <mk7.kang@samsung.com>
* Heungjun Kim <riverful.kim@samsung.com>
*
* based on drivers/serial/s3c64xx.c
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <linux/compiler.h>
#include <asm/io.h>
#include <asm/arch/clk.h>
#include <asm/arch/uart.h>
#include <serial.h>
DECLARE_GLOBAL_DATA_PTR;
#define RX_FIFO_COUNT_SHIFT 0
#define RX_FIFO_COUNT_MASK (0xff << RX_FIFO_COUNT_SHIFT)
#define RX_FIFO_FULL (1 << 8)
#define TX_FIFO_COUNT_SHIFT 16
#define TX_FIFO_COUNT_MASK (0xff << TX_FIFO_COUNT_SHIFT)
#define TX_FIFO_FULL (1 << 24)
/* Information about a serial port */
struct s5p_serial_platdata {
struct s5p_uart *reg; /* address of registers in physical memory */
u8 port_id; /* uart port number */
};
/*
* The coefficient, used to calculate the baudrate on S5P UARTs is
* calculated as
* C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT
* however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1,
* 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants:
*/
static const int udivslot[] = {
0,
0x0080,
0x0808,
0x0888,
0x2222,
0x4924,
0x4a52,
0x54aa,
0x5555,
0xd555,
0xd5d5,
0xddd5,
0xdddd,
0xdfdd,
0xdfdf,
0xffdf,
};
static void __maybe_unused s5p_serial_init(struct s5p_uart *uart)
{
/* enable FIFOs, auto clear Rx FIFO */
writel(0x3, &uart->ufcon);
writel(0, &uart->umcon);
/* 8N1 */
writel(0x3, &uart->ulcon);
/* No interrupts, no DMA, pure polling */
writel(0x245, &uart->ucon);
}
static void __maybe_unused s5p_serial_baud(struct s5p_uart *uart, uint uclk,
int baudrate)
{
u32 val;
val = uclk / baudrate;
writel(val / 16 - 1, &uart->ubrdiv);
if (s5p_uart_divslot())
writew(udivslot[val % 16], &uart->rest.slot);
else
writeb(val % 16, &uart->rest.value);
}
int s5p_serial_setbrg(struct udevice *dev, int baudrate)
{
struct s5p_serial_platdata *plat = dev->platdata;
struct s5p_uart *const uart = plat->reg;
u32 uclk = get_uart_clk(plat->port_id);
s5p_serial_baud(uart, uclk, baudrate);
return 0;
}
static int s5p_serial_probe(struct udevice *dev)
{
struct s5p_serial_platdata *plat = dev->platdata;
struct s5p_uart *const uart = plat->reg;
s5p_serial_init(uart);
return 0;
}
static int serial_err_check(const struct s5p_uart *const uart, int op)
{
unsigned int mask;
/*
* UERSTAT
* Break Detect [3]
* Frame Err [2] : receive operation
* Parity Err [1] : receive operation
* Overrun Err [0] : receive operation
*/
if (op)
mask = 0x8;
else
mask = 0xf;
return readl(&uart->uerstat) & mask;
}
static int s5p_serial_getc(struct udevice *dev)
{
struct s5p_serial_platdata *plat = dev->platdata;
struct s5p_uart *const uart = plat->reg;
if (!(readl(&uart->ufstat) & RX_FIFO_COUNT_MASK))
return -EAGAIN;
serial_err_check(uart, 0);
return (int)(readb(&uart->urxh) & 0xff);
}
static int s5p_serial_putc(struct udevice *dev, const char ch)
{
struct s5p_serial_platdata *plat = dev->platdata;
struct s5p_uart *const uart = plat->reg;
if (readl(&uart->ufstat) & TX_FIFO_FULL)
return -EAGAIN;
writeb(ch, &uart->utxh);
serial_err_check(uart, 1);
return 0;
}
static int s5p_serial_pending(struct udevice *dev, bool input)
{
struct s5p_serial_platdata *plat = dev->platdata;
struct s5p_uart *const uart = plat->reg;
uint32_t ufstat = readl(&uart->ufstat);
if (input)
return (ufstat & RX_FIFO_COUNT_MASK) >> RX_FIFO_COUNT_SHIFT;
else
return (ufstat & TX_FIFO_COUNT_MASK) >> TX_FIFO_COUNT_SHIFT;
}
static int s5p_serial_ofdata_to_platdata(struct udevice *dev)
{
struct s5p_serial_platdata *plat = dev->platdata;
fdt_addr_t addr;
addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg");
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
plat->reg = (struct s5p_uart *)addr;
plat->port_id = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "id", -1);
return 0;
}
static const struct dm_serial_ops s5p_serial_ops = {
.putc = s5p_serial_putc,
.pending = s5p_serial_pending,
.getc = s5p_serial_getc,
.setbrg = s5p_serial_setbrg,
};
static const struct udevice_id s5p_serial_ids[] = {
{ .compatible = "samsung,exynos4210-uart" },
{ }
};
U_BOOT_DRIVER(serial_s5p) = {
.name = "serial_s5p",
.id = UCLASS_SERIAL,
.of_match = s5p_serial_ids,
.ofdata_to_platdata = s5p_serial_ofdata_to_platdata,
.platdata_auto_alloc_size = sizeof(struct s5p_serial_platdata),
.probe = s5p_serial_probe,
.ops = &s5p_serial_ops,
.flags = DM_FLAG_PRE_RELOC,
};
|
