1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
|
// SPDX-License-Identifier: BSD-3-Clause
/*
* Qualcomm SPMI bus driver
*
* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
*
* Loosely based on Little Kernel driver
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <asm/io.h>
#include <spmi/spmi.h>
DECLARE_GLOBAL_DATA_PTR;
/* PMIC Arbiter configuration registers */
#define PMIC_ARB_VERSION 0x0000
#define PMIC_ARB_VERSION_V2_MIN 0x20010000
#define ARB_CHANNEL_OFFSET(n) (0x4 * (n))
#define SPMI_CH_OFFSET(chnl) ((chnl) * 0x8000)
#define SPMI_REG_CMD0 0x0
#define SPMI_REG_CONFIG 0x4
#define SPMI_REG_STATUS 0x8
#define SPMI_REG_WDATA 0x10
#define SPMI_REG_RDATA 0x18
#define SPMI_CMD_OPCODE_SHIFT 27
#define SPMI_CMD_SLAVE_ID_SHIFT 20
#define SPMI_CMD_ADDR_SHIFT 12
#define SPMI_CMD_ADDR_OFFSET_SHIFT 4
#define SPMI_CMD_BYTE_CNT_SHIFT 0
#define SPMI_CMD_EXT_REG_WRITE_LONG 0x00
#define SPMI_CMD_EXT_REG_READ_LONG 0x01
#define SPMI_STATUS_DONE 0x1
#define SPMI_MAX_CHANNELS 128
#define SPMI_MAX_SLAVES 16
#define SPMI_MAX_PERIPH 256
struct msm_spmi_priv {
phys_addr_t arb_chnl; /* ARB channel mapping base */
phys_addr_t spmi_core; /* SPMI core */
phys_addr_t spmi_obs; /* SPMI observer */
/* SPMI channel map */
uint8_t channel_map[SPMI_MAX_SLAVES][SPMI_MAX_PERIPH];
};
static int msm_spmi_write(struct udevice *dev, int usid, int pid, int off,
uint8_t val)
{
struct msm_spmi_priv *priv = dev_get_priv(dev);
unsigned channel;
uint32_t reg = 0;
if (usid >= SPMI_MAX_SLAVES)
return -EIO;
if (pid >= SPMI_MAX_PERIPH)
return -EIO;
channel = priv->channel_map[usid][pid];
/* Disable IRQ mode for the current channel*/
writel(0x0, priv->spmi_core + SPMI_CH_OFFSET(channel) +
SPMI_REG_CONFIG);
/* Write single byte */
writel(val, priv->spmi_core + SPMI_CH_OFFSET(channel) + SPMI_REG_WDATA);
/* Prepare write command */
reg |= SPMI_CMD_EXT_REG_WRITE_LONG << SPMI_CMD_OPCODE_SHIFT;
reg |= (usid << SPMI_CMD_SLAVE_ID_SHIFT);
reg |= (pid << SPMI_CMD_ADDR_SHIFT);
reg |= (off << SPMI_CMD_ADDR_OFFSET_SHIFT);
reg |= 1; /* byte count */
/* Send write command */
writel(reg, priv->spmi_core + SPMI_CH_OFFSET(channel) + SPMI_REG_CMD0);
/* Wait till CMD DONE status */
reg = 0;
while (!reg) {
reg = readl(priv->spmi_core + SPMI_CH_OFFSET(channel) +
SPMI_REG_STATUS);
}
if (reg ^ SPMI_STATUS_DONE) {
printf("SPMI write failure.\n");
return -EIO;
}
return 0;
}
static int msm_spmi_read(struct udevice *dev, int usid, int pid, int off)
{
struct msm_spmi_priv *priv = dev_get_priv(dev);
unsigned channel;
uint32_t reg = 0;
if (usid >= SPMI_MAX_SLAVES)
return -EIO;
if (pid >= SPMI_MAX_PERIPH)
return -EIO;
channel = priv->channel_map[usid][pid];
/* Disable IRQ mode for the current channel*/
writel(0x0, priv->spmi_obs + SPMI_CH_OFFSET(channel) + SPMI_REG_CONFIG);
/* Prepare read command */
reg |= SPMI_CMD_EXT_REG_READ_LONG << SPMI_CMD_OPCODE_SHIFT;
reg |= (usid << SPMI_CMD_SLAVE_ID_SHIFT);
reg |= (pid << SPMI_CMD_ADDR_SHIFT);
reg |= (off << SPMI_CMD_ADDR_OFFSET_SHIFT);
reg |= 1; /* byte count */
/* Request read */
writel(reg, priv->spmi_obs + SPMI_CH_OFFSET(channel) + SPMI_REG_CMD0);
/* Wait till CMD DONE status */
reg = 0;
while (!reg) {
reg = readl(priv->spmi_obs + SPMI_CH_OFFSET(channel) +
SPMI_REG_STATUS);
}
if (reg ^ SPMI_STATUS_DONE) {
printf("SPMI read failure.\n");
return -EIO;
}
/* Read the data */
return readl(priv->spmi_obs + SPMI_CH_OFFSET(channel) +
SPMI_REG_RDATA) & 0xFF;
}
static struct dm_spmi_ops msm_spmi_ops = {
.read = msm_spmi_read,
.write = msm_spmi_write,
};
static int msm_spmi_probe(struct udevice *dev)
{
struct udevice *parent = dev->parent;
struct msm_spmi_priv *priv = dev_get_priv(dev);
int node = dev_of_offset(dev);
u32 hw_ver;
bool is_v1;
int i;
priv->arb_chnl = devfdt_get_addr(dev);
priv->spmi_core = fdtdec_get_addr_size_auto_parent(gd->fdt_blob,
dev_of_offset(parent), node, "reg", 1, NULL, false);
priv->spmi_obs = fdtdec_get_addr_size_auto_parent(gd->fdt_blob,
dev_of_offset(parent), node, "reg", 2, NULL, false);
hw_ver = readl(priv->arb_chnl + PMIC_ARB_VERSION - 0x800);
is_v1 = (hw_ver < PMIC_ARB_VERSION_V2_MIN);
dev_dbg(dev, "PMIC Arb Version-%d (0x%x)\n", (is_v1 ? 1 : 2), hw_ver);
if (priv->arb_chnl == FDT_ADDR_T_NONE ||
priv->spmi_core == FDT_ADDR_T_NONE ||
priv->spmi_obs == FDT_ADDR_T_NONE)
return -EINVAL;
/* Scan peripherals connected to each SPMI channel */
for (i = 0; i < SPMI_MAX_PERIPH ; i++) {
uint32_t periph = readl(priv->arb_chnl + ARB_CHANNEL_OFFSET(i));
uint8_t slave_id = (periph & 0xf0000) >> 16;
uint8_t pid = (periph & 0xff00) >> 8;
priv->channel_map[slave_id][pid] = i;
}
return 0;
}
static const struct udevice_id msm_spmi_ids[] = {
{ .compatible = "qcom,spmi-pmic-arb" },
{ }
};
U_BOOT_DRIVER(msm_spmi) = {
.name = "msm_spmi",
.id = UCLASS_SPMI,
.of_match = msm_spmi_ids,
.ops = &msm_spmi_ops,
.probe = msm_spmi_probe,
.priv_auto_alloc_size = sizeof(struct msm_spmi_priv),
};
|
