1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
|
// SPDX-License-Identifier: GPL-2.0
/**
* core.c - DesignWare USB3 DRD Controller Core file
*
* Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
*
* Authors: Felipe Balbi <balbi@ti.com>,
* Sebastian Andrzej Siewior <bigeasy@linutronix.de>
*
* Taken from Linux Kernel v3.19-rc1 (drivers/usb/dwc3/core.c) and ported
* to uboot.
*
* commit cd72f890d2 : usb: dwc3: core: enable phy suspend quirk on non-FPGA
*/
#include <common.h>
#include <cpu_func.h>
#include <malloc.h>
#include <dwc3-uboot.h>
#include <asm/dma-mapping.h>
#include <linux/ioport.h>
#include <dm.h>
#include <generic-phy.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include "core.h"
#include "gadget.h"
#include "io.h"
#include "linux-compat.h"
static LIST_HEAD(dwc3_list);
/* -------------------------------------------------------------------------- */
static void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
{
u32 reg;
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG));
reg |= DWC3_GCTL_PRTCAPDIR(mode);
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
}
/**
* dwc3_core_soft_reset - Issues core soft reset and PHY reset
* @dwc: pointer to our context structure
*/
static int dwc3_core_soft_reset(struct dwc3 *dwc)
{
u32 reg;
/* Before Resetting PHY, put Core in Reset */
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg |= DWC3_GCTL_CORESOFTRESET;
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
/* Assert USB3 PHY reset */
reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST;
dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
/* Assert USB2 PHY reset */
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
mdelay(100);
/* Clear USB3 PHY reset */
reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
/* Clear USB2 PHY reset */
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST;
dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
mdelay(100);
/* After PHYs are stable we can take Core out of reset state */
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg &= ~DWC3_GCTL_CORESOFTRESET;
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
return 0;
}
/**
* dwc3_free_one_event_buffer - Frees one event buffer
* @dwc: Pointer to our controller context structure
* @evt: Pointer to event buffer to be freed
*/
static void dwc3_free_one_event_buffer(struct dwc3 *dwc,
struct dwc3_event_buffer *evt)
{
dma_free_coherent(evt->buf);
}
/**
* dwc3_alloc_one_event_buffer - Allocates one event buffer structure
* @dwc: Pointer to our controller context structure
* @length: size of the event buffer
*
* Returns a pointer to the allocated event buffer structure on success
* otherwise ERR_PTR(errno).
*/
static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc,
unsigned length)
{
struct dwc3_event_buffer *evt;
evt = devm_kzalloc((struct udevice *)dwc->dev, sizeof(*evt),
GFP_KERNEL);
if (!evt)
return ERR_PTR(-ENOMEM);
evt->dwc = dwc;
evt->length = length;
evt->buf = dma_alloc_coherent(length,
(unsigned long *)&evt->dma);
if (!evt->buf)
return ERR_PTR(-ENOMEM);
dwc3_flush_cache((uintptr_t)evt->buf, evt->length);
return evt;
}
/**
* dwc3_free_event_buffers - frees all allocated event buffers
* @dwc: Pointer to our controller context structure
*/
static void dwc3_free_event_buffers(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
int i;
for (i = 0; i < dwc->num_event_buffers; i++) {
evt = dwc->ev_buffs[i];
if (evt)
dwc3_free_one_event_buffer(dwc, evt);
}
}
/**
* dwc3_alloc_event_buffers - Allocates @num event buffers of size @length
* @dwc: pointer to our controller context structure
* @length: size of event buffer
*
* Returns 0 on success otherwise negative errno. In the error case, dwc
* may contain some buffers allocated but not all which were requested.
*/
static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
{
int num;
int i;
num = DWC3_NUM_INT(dwc->hwparams.hwparams1);
dwc->num_event_buffers = num;
dwc->ev_buffs = memalign(CONFIG_SYS_CACHELINE_SIZE,
sizeof(*dwc->ev_buffs) * num);
if (!dwc->ev_buffs)
return -ENOMEM;
for (i = 0; i < num; i++) {
struct dwc3_event_buffer *evt;
evt = dwc3_alloc_one_event_buffer(dwc, length);
if (IS_ERR(evt)) {
dev_err(dwc->dev, "can't allocate event buffer\n");
return PTR_ERR(evt);
}
dwc->ev_buffs[i] = evt;
}
return 0;
}
/**
* dwc3_event_buffers_setup - setup our allocated event buffers
* @dwc: pointer to our controller context structure
*
* Returns 0 on success otherwise negative errno.
*/
static int dwc3_event_buffers_setup(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
int n;
for (n = 0; n < dwc->num_event_buffers; n++) {
evt = dwc->ev_buffs[n];
dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n",
evt->buf, (unsigned long long) evt->dma,
evt->length);
evt->lpos = 0;
dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n),
lower_32_bits(evt->dma));
dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n),
upper_32_bits(evt->dma));
dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n),
DWC3_GEVNTSIZ_SIZE(evt->length));
dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0);
}
return 0;
}
static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
int n;
for (n = 0; n < dwc->num_event_buffers; n++) {
evt = dwc->ev_buffs[n];
evt->lpos = 0;
dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0);
dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0);
dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), DWC3_GEVNTSIZ_INTMASK
| DWC3_GEVNTSIZ_SIZE(0));
dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0);
}
}
static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc)
{
if (!dwc->has_hibernation)
return 0;
if (!dwc->nr_scratch)
return 0;
dwc->scratchbuf = kmalloc_array(dwc->nr_scratch,
DWC3_SCRATCHBUF_SIZE, GFP_KERNEL);
if (!dwc->scratchbuf)
return -ENOMEM;
return 0;
}
static int dwc3_setup_scratch_buffers(struct dwc3 *dwc)
{
dma_addr_t scratch_addr;
u32 param;
int ret;
if (!dwc->has_hibernation)
return 0;
if (!dwc->nr_scratch)
return 0;
scratch_addr = dma_map_single(dwc->scratchbuf,
dwc->nr_scratch * DWC3_SCRATCHBUF_SIZE,
DMA_BIDIRECTIONAL);
if (dma_mapping_error(dwc->dev, scratch_addr)) {
dev_err(dwc->dev, "failed to map scratch buffer\n");
ret = -EFAULT;
goto err0;
}
dwc->scratch_addr = scratch_addr;
param = lower_32_bits(scratch_addr);
ret = dwc3_send_gadget_generic_command(dwc,
DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO, param);
if (ret < 0)
goto err1;
param = upper_32_bits(scratch_addr);
ret = dwc3_send_gadget_generic_command(dwc,
DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI, param);
if (ret < 0)
goto err1;
return 0;
err1:
dma_unmap_single((void *)(uintptr_t)dwc->scratch_addr, dwc->nr_scratch *
DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL);
err0:
return ret;
}
static void dwc3_free_scratch_buffers(struct dwc3 *dwc)
{
if (!dwc->has_hibernation)
return;
if (!dwc->nr_scratch)
return;
dma_unmap_single((void *)(uintptr_t)dwc->scratch_addr, dwc->nr_scratch *
DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL);
kfree(dwc->scratchbuf);
}
static void dwc3_core_num_eps(struct dwc3 *dwc)
{
struct dwc3_hwparams *parms = &dwc->hwparams;
dwc->num_in_eps = DWC3_NUM_IN_EPS(parms);
dwc->num_out_eps = DWC3_NUM_EPS(parms) - dwc->num_in_eps;
dev_vdbg(dwc->dev, "found %d IN and %d OUT endpoints\n",
dwc->num_in_eps, dwc->num_out_eps);
}
static void dwc3_cache_hwparams(struct dwc3 *dwc)
{
struct dwc3_hwparams *parms = &dwc->hwparams;
parms->hwparams0 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS0);
parms->hwparams1 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS1);
parms->hwparams2 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS2);
parms->hwparams3 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS3);
parms->hwparams4 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS4);
parms->hwparams5 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS5);
parms->hwparams6 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS6);
parms->hwparams7 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS7);
parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8);
}
/**
* dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
* @dwc: Pointer to our controller context structure
*/
static void dwc3_phy_setup(struct dwc3 *dwc)
{
u32 reg;
reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
/*
* Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY
* to '0' during coreConsultant configuration. So default value
* will be '0' when the core is reset. Application needs to set it
* to '1' after the core initialization is completed.
*/
if (dwc->revision > DWC3_REVISION_194A)
reg |= DWC3_GUSB3PIPECTL_SUSPHY;
if (dwc->u2ss_inp3_quirk)
reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK;
if (dwc->req_p1p2p3_quirk)
reg |= DWC3_GUSB3PIPECTL_REQP1P2P3;
if (dwc->del_p1p2p3_quirk)
reg |= DWC3_GUSB3PIPECTL_DEP1P2P3_EN;
if (dwc->del_phy_power_chg_quirk)
reg |= DWC3_GUSB3PIPECTL_DEPOCHANGE;
if (dwc->lfps_filter_quirk)
reg |= DWC3_GUSB3PIPECTL_LFPSFILT;
if (dwc->rx_detect_poll_quirk)
reg |= DWC3_GUSB3PIPECTL_RX_DETOPOLL;
if (dwc->tx_de_emphasis_quirk)
reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis);
if (dwc->dis_u3_susphy_quirk)
reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
mdelay(100);
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
/*
* Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
* '0' during coreConsultant configuration. So default value will
* be '0' when the core is reset. Application needs to set it to
* '1' after the core initialization is completed.
*/
if (dwc->revision > DWC3_REVISION_194A)
reg |= DWC3_GUSB2PHYCFG_SUSPHY;
if (dwc->dis_u2_susphy_quirk)
reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
mdelay(100);
}
/**
* dwc3_core_init - Low-level initialization of DWC3 Core
* @dwc: Pointer to our controller context structure
*
* Returns 0 on success otherwise negative errno.
*/
static int dwc3_core_init(struct dwc3 *dwc)
{
unsigned long timeout;
u32 hwparams4 = dwc->hwparams.hwparams4;
u32 reg;
int ret;
reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
/* This should read as U3 followed by revision number */
if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) {
dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
ret = -ENODEV;
goto err0;
}
dwc->revision = reg;
/* Handle USB2.0-only core configuration */
if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
DWC3_GHWPARAMS3_SSPHY_IFC_DIS) {
if (dwc->maximum_speed == USB_SPEED_SUPER)
dwc->maximum_speed = USB_SPEED_HIGH;
}
/* issue device SoftReset too */
timeout = 5000;
dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST);
while (timeout--) {
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
if (!(reg & DWC3_DCTL_CSFTRST))
break;
};
if (!timeout) {
dev_err(dwc->dev, "Reset Timed Out\n");
ret = -ETIMEDOUT;
goto err0;
}
dwc3_phy_setup(dwc);
ret = dwc3_core_soft_reset(dwc);
if (ret)
goto err0;
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {
case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
/**
* WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an
* issue which would cause xHCI compliance tests to fail.
*
* Because of that we cannot enable clock gating on such
* configurations.
*
* Refers to:
*
* STAR#9000588375: Clock Gating, SOF Issues when ref_clk-Based
* SOF/ITP Mode Used
*/
if ((dwc->dr_mode == USB_DR_MODE_HOST ||
dwc->dr_mode == USB_DR_MODE_OTG) &&
(dwc->revision >= DWC3_REVISION_210A &&
dwc->revision <= DWC3_REVISION_250A))
reg |= DWC3_GCTL_DSBLCLKGTNG | DWC3_GCTL_SOFITPSYNC;
else
reg &= ~DWC3_GCTL_DSBLCLKGTNG;
break;
case DWC3_GHWPARAMS1_EN_PWROPT_HIB:
/* enable hibernation here */
dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4);
/*
* REVISIT Enabling this bit so that host-mode hibernation
* will work. Device-mode hibernation is not yet implemented.
*/
reg |= DWC3_GCTL_GBLHIBERNATIONEN;
break;
default:
dev_dbg(dwc->dev, "No power optimization available\n");
}
/* check if current dwc3 is on simulation board */
if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) {
dev_dbg(dwc->dev, "it is on FPGA board\n");
dwc->is_fpga = true;
}
if(dwc->disable_scramble_quirk && !dwc->is_fpga)
WARN(true,
"disable_scramble cannot be used on non-FPGA builds\n");
if (dwc->disable_scramble_quirk && dwc->is_fpga)
reg |= DWC3_GCTL_DISSCRAMBLE;
else
reg &= ~DWC3_GCTL_DISSCRAMBLE;
if (dwc->u2exit_lfps_quirk)
reg |= DWC3_GCTL_U2EXIT_LFPS;
/*
* WORKAROUND: DWC3 revisions <1.90a have a bug
* where the device can fail to connect at SuperSpeed
* and falls back to high-speed mode which causes
* the device to enter a Connect/Disconnect loop
*/
if (dwc->revision < DWC3_REVISION_190A)
reg |= DWC3_GCTL_U2RSTECN;
dwc3_core_num_eps(dwc);
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
ret = dwc3_alloc_scratch_buffers(dwc);
if (ret)
goto err0;
ret = dwc3_setup_scratch_buffers(dwc);
if (ret)
goto err1;
return 0;
err1:
dwc3_free_scratch_buffers(dwc);
err0:
return ret;
}
static void dwc3_core_exit(struct dwc3 *dwc)
{
dwc3_free_scratch_buffers(dwc);
}
static int dwc3_core_init_mode(struct dwc3 *dwc)
{
int ret;
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
ret = dwc3_gadget_init(dwc);
if (ret) {
dev_err(dev, "failed to initialize gadget\n");
return ret;
}
break;
case USB_DR_MODE_HOST:
dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
ret = dwc3_host_init(dwc);
if (ret) {
dev_err(dev, "failed to initialize host\n");
return ret;
}
break;
case USB_DR_MODE_OTG:
dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
ret = dwc3_host_init(dwc);
if (ret) {
dev_err(dev, "failed to initialize host\n");
return ret;
}
ret = dwc3_gadget_init(dwc);
if (ret) {
dev_err(dev, "failed to initialize gadget\n");
return ret;
}
break;
default:
dev_err(dev, "Unsupported mode of operation %d\n", dwc->dr_mode);
return -EINVAL;
}
return 0;
}
static void dwc3_gadget_run(struct dwc3 *dwc)
{
dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_RUN_STOP);
mdelay(100);
}
static void dwc3_core_exit_mode(struct dwc3 *dwc)
{
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
dwc3_gadget_exit(dwc);
break;
case USB_DR_MODE_HOST:
dwc3_host_exit(dwc);
break;
case USB_DR_MODE_OTG:
dwc3_host_exit(dwc);
dwc3_gadget_exit(dwc);
break;
default:
/* do nothing */
break;
}
/*
* switch back to peripheral mode
* This enables the phy to enter idle and then, if enabled, suspend.
*/
dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
dwc3_gadget_run(dwc);
}
static void dwc3_uboot_hsphy_mode(struct dwc3_device *dwc3_dev,
struct dwc3 *dwc)
{
enum usb_phy_interface hsphy_mode = dwc3_dev->hsphy_mode;
u32 reg;
/* Set dwc3 usb2 phy config */
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
reg |= DWC3_GUSB2PHYCFG_PHYIF;
reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK;
switch (hsphy_mode) {
case USBPHY_INTERFACE_MODE_UTMI:
reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_8BIT;
break;
case USBPHY_INTERFACE_MODE_UTMIW:
reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT;
break;
default:
break;
}
dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
}
#define DWC3_ALIGN_MASK (16 - 1)
/**
* dwc3_uboot_init - dwc3 core uboot initialization code
* @dwc3_dev: struct dwc3_device containing initialization data
*
* Entry point for dwc3 driver (equivalent to dwc3_probe in linux
* kernel driver). Pointer to dwc3_device should be passed containing
* base address and other initialization data. Returns '0' on success and
* a negative value on failure.
*
* Generally called from board_usb_init() implemented in board file.
*/
int dwc3_uboot_init(struct dwc3_device *dwc3_dev)
{
struct dwc3 *dwc;
struct device *dev = NULL;
u8 lpm_nyet_threshold;
u8 tx_de_emphasis;
u8 hird_threshold;
int ret;
void *mem;
mem = devm_kzalloc((struct udevice *)dev,
sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL);
if (!mem)
return -ENOMEM;
dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1);
dwc->mem = mem;
dwc->regs = (void *)(uintptr_t)(dwc3_dev->base +
DWC3_GLOBALS_REGS_START);
/* default to highest possible threshold */
lpm_nyet_threshold = 0xff;
/* default to -3.5dB de-emphasis */
tx_de_emphasis = 1;
/*
* default to assert utmi_sleep_n and use maximum allowed HIRD
* threshold value of 0b1100
*/
hird_threshold = 12;
dwc->maximum_speed = dwc3_dev->maximum_speed;
dwc->has_lpm_erratum = dwc3_dev->has_lpm_erratum;
if (dwc3_dev->lpm_nyet_threshold)
lpm_nyet_threshold = dwc3_dev->lpm_nyet_threshold;
dwc->is_utmi_l1_suspend = dwc3_dev->is_utmi_l1_suspend;
if (dwc3_dev->hird_threshold)
hird_threshold = dwc3_dev->hird_threshold;
dwc->needs_fifo_resize = dwc3_dev->tx_fifo_resize;
dwc->dr_mode = dwc3_dev->dr_mode;
dwc->disable_scramble_quirk = dwc3_dev->disable_scramble_quirk;
dwc->u2exit_lfps_quirk = dwc3_dev->u2exit_lfps_quirk;
dwc->u2ss_inp3_quirk = dwc3_dev->u2ss_inp3_quirk;
dwc->req_p1p2p3_quirk = dwc3_dev->req_p1p2p3_quirk;
dwc->del_p1p2p3_quirk = dwc3_dev->del_p1p2p3_quirk;
dwc->del_phy_power_chg_quirk = dwc3_dev->del_phy_power_chg_quirk;
dwc->lfps_filter_quirk = dwc3_dev->lfps_filter_quirk;
dwc->rx_detect_poll_quirk = dwc3_dev->rx_detect_poll_quirk;
dwc->dis_u3_susphy_quirk = dwc3_dev->dis_u3_susphy_quirk;
dwc->dis_u2_susphy_quirk = dwc3_dev->dis_u2_susphy_quirk;
dwc->tx_de_emphasis_quirk = dwc3_dev->tx_de_emphasis_quirk;
if (dwc3_dev->tx_de_emphasis)
tx_de_emphasis = dwc3_dev->tx_de_emphasis;
/* default to superspeed if no maximum_speed passed */
if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
dwc->maximum_speed = USB_SPEED_SUPER;
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
dwc->hird_threshold = hird_threshold
| (dwc->is_utmi_l1_suspend << 4);
dwc->index = dwc3_dev->index;
dwc3_cache_hwparams(dwc);
ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
if (ret) {
dev_err(dwc->dev, "failed to allocate event buffers\n");
return -ENOMEM;
}
if (!IS_ENABLED(CONFIG_USB_DWC3_GADGET))
dwc->dr_mode = USB_DR_MODE_HOST;
else if (!IS_ENABLED(CONFIG_USB_HOST))
dwc->dr_mode = USB_DR_MODE_PERIPHERAL;
if (dwc->dr_mode == USB_DR_MODE_UNKNOWN)
dwc->dr_mode = USB_DR_MODE_OTG;
ret = dwc3_core_init(dwc);
if (ret) {
dev_err(dev, "failed to initialize core\n");
goto err0;
}
dwc3_uboot_hsphy_mode(dwc3_dev, dwc);
ret = dwc3_event_buffers_setup(dwc);
if (ret) {
dev_err(dwc->dev, "failed to setup event buffers\n");
goto err1;
}
ret = dwc3_core_init_mode(dwc);
if (ret)
goto err2;
list_add_tail(&dwc->list, &dwc3_list);
return 0;
err2:
dwc3_event_buffers_cleanup(dwc);
err1:
dwc3_core_exit(dwc);
err0:
dwc3_free_event_buffers(dwc);
return ret;
}
/**
* dwc3_uboot_exit - dwc3 core uboot cleanup code
* @index: index of this controller
*
* Performs cleanup of memory allocated in dwc3_uboot_init and other misc
* cleanups (equivalent to dwc3_remove in linux). index of _this_ controller
* should be passed and should match with the index passed in
* dwc3_device during init.
*
* Generally called from board file.
*/
void dwc3_uboot_exit(int index)
{
struct dwc3 *dwc;
list_for_each_entry(dwc, &dwc3_list, list) {
if (dwc->index != index)
continue;
dwc3_core_exit_mode(dwc);
dwc3_event_buffers_cleanup(dwc);
dwc3_free_event_buffers(dwc);
dwc3_core_exit(dwc);
list_del(&dwc->list);
kfree(dwc->mem);
break;
}
}
/**
* dwc3_uboot_handle_interrupt - handle dwc3 core interrupt
* @index: index of this controller
*
* Invokes dwc3 gadget interrupts.
*
* Generally called from board file.
*/
void dwc3_uboot_handle_interrupt(int index)
{
struct dwc3 *dwc = NULL;
list_for_each_entry(dwc, &dwc3_list, list) {
if (dwc->index != index)
continue;
dwc3_gadget_uboot_handle_interrupt(dwc);
break;
}
}
MODULE_ALIAS("platform:dwc3");
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver");
#if CONFIG_IS_ENABLED(PHY) && CONFIG_IS_ENABLED(DM_USB)
int dwc3_setup_phy(struct udevice *dev, struct phy **array, int *num_phys)
{
int i, ret, count;
struct phy *usb_phys;
/* Return if no phy declared */
if (!dev_read_prop(dev, "phys", NULL))
return 0;
count = dev_count_phandle_with_args(dev, "phys", "#phy-cells");
if (count <= 0)
return count;
usb_phys = devm_kcalloc(dev, count, sizeof(struct phy),
GFP_KERNEL);
if (!usb_phys)
return -ENOMEM;
for (i = 0; i < count; i++) {
ret = generic_phy_get_by_index(dev, i, &usb_phys[i]);
if (ret && ret != -ENOENT) {
pr_err("Failed to get USB PHY%d for %s\n",
i, dev->name);
return ret;
}
}
for (i = 0; i < count; i++) {
ret = generic_phy_init(&usb_phys[i]);
if (ret) {
pr_err("Can't init USB PHY%d for %s\n",
i, dev->name);
goto phys_init_err;
}
}
for (i = 0; i < count; i++) {
ret = generic_phy_power_on(&usb_phys[i]);
if (ret) {
pr_err("Can't power USB PHY%d for %s\n",
i, dev->name);
goto phys_poweron_err;
}
}
*array = usb_phys;
*num_phys = count;
return 0;
phys_poweron_err:
for (i = count - 1; i >= 0; i--)
generic_phy_power_off(&usb_phys[i]);
for (i = 0; i < count; i++)
generic_phy_exit(&usb_phys[i]);
return ret;
phys_init_err:
for (; i >= 0; i--)
generic_phy_exit(&usb_phys[i]);
return ret;
}
int dwc3_shutdown_phy(struct udevice *dev, struct phy *usb_phys, int num_phys)
{
int i, ret;
for (i = 0; i < num_phys; i++) {
if (!generic_phy_valid(&usb_phys[i]))
continue;
ret = generic_phy_power_off(&usb_phys[i]);
ret |= generic_phy_exit(&usb_phys[i]);
if (ret) {
pr_err("Can't shutdown USB PHY%d for %s\n",
i, dev->name);
}
}
return 0;
}
#endif
#if CONFIG_IS_ENABLED(DM_USB)
void dwc3_of_parse(struct dwc3 *dwc)
{
const u8 *tmp;
struct udevice *dev = dwc->dev;
u8 lpm_nyet_threshold;
u8 tx_de_emphasis;
u8 hird_threshold;
/* default to highest possible threshold */
lpm_nyet_threshold = 0xff;
/* default to -3.5dB de-emphasis */
tx_de_emphasis = 1;
/*
* default to assert utmi_sleep_n and use maximum allowed HIRD
* threshold value of 0b1100
*/
hird_threshold = 12;
dwc->has_lpm_erratum = dev_read_bool(dev,
"snps,has-lpm-erratum");
tmp = dev_read_u8_array_ptr(dev, "snps,lpm-nyet-threshold", 1);
if (tmp)
lpm_nyet_threshold = *tmp;
dwc->is_utmi_l1_suspend = dev_read_bool(dev,
"snps,is-utmi-l1-suspend");
tmp = dev_read_u8_array_ptr(dev, "snps,hird-threshold", 1);
if (tmp)
hird_threshold = *tmp;
dwc->disable_scramble_quirk = dev_read_bool(dev,
"snps,disable_scramble_quirk");
dwc->u2exit_lfps_quirk = dev_read_bool(dev,
"snps,u2exit_lfps_quirk");
dwc->u2ss_inp3_quirk = dev_read_bool(dev,
"snps,u2ss_inp3_quirk");
dwc->req_p1p2p3_quirk = dev_read_bool(dev,
"snps,req_p1p2p3_quirk");
dwc->del_p1p2p3_quirk = dev_read_bool(dev,
"snps,del_p1p2p3_quirk");
dwc->del_phy_power_chg_quirk = dev_read_bool(dev,
"snps,del_phy_power_chg_quirk");
dwc->lfps_filter_quirk = dev_read_bool(dev,
"snps,lfps_filter_quirk");
dwc->rx_detect_poll_quirk = dev_read_bool(dev,
"snps,rx_detect_poll_quirk");
dwc->dis_u3_susphy_quirk = dev_read_bool(dev,
"snps,dis_u3_susphy_quirk");
dwc->dis_u2_susphy_quirk = dev_read_bool(dev,
"snps,dis_u2_susphy_quirk");
dwc->tx_de_emphasis_quirk = dev_read_bool(dev,
"snps,tx_de_emphasis_quirk");
tmp = dev_read_u8_array_ptr(dev, "snps,tx_de_emphasis", 1);
if (tmp)
tx_de_emphasis = *tmp;
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
dwc->hird_threshold = hird_threshold
| (dwc->is_utmi_l1_suspend << 4);
}
int dwc3_init(struct dwc3 *dwc)
{
int ret;
dwc3_cache_hwparams(dwc);
ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
if (ret) {
dev_err(dwc->dev, "failed to allocate event buffers\n");
return -ENOMEM;
}
ret = dwc3_core_init(dwc);
if (ret) {
dev_err(dev, "failed to initialize core\n");
goto core_fail;
}
ret = dwc3_event_buffers_setup(dwc);
if (ret) {
dev_err(dwc->dev, "failed to setup event buffers\n");
goto event_fail;
}
ret = dwc3_core_init_mode(dwc);
if (ret)
goto mode_fail;
return 0;
mode_fail:
dwc3_event_buffers_cleanup(dwc);
event_fail:
dwc3_core_exit(dwc);
core_fail:
dwc3_free_event_buffers(dwc);
return ret;
}
void dwc3_remove(struct dwc3 *dwc)
{
dwc3_core_exit_mode(dwc);
dwc3_event_buffers_cleanup(dwc);
dwc3_free_event_buffers(dwc);
dwc3_core_exit(dwc);
kfree(dwc->mem);
}
#endif
|