blob: 5d66e5881f3240a2ac4f7c1918aa870490d58f34 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
|
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2012
* eInfochips Ltd. <www.einfochips.com>
* Written-by: Ajay Bhargav <contact@8051projects.net>
*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
*/
#include <common.h>
#include <asm/io.h>
#include <usb.h>
#include <asm/arch/cpu.h>
#include <asm/arch/armada100.h>
#include <asm/arch/utmi-armada100.h>
#include <linux/delay.h>
static int utmi_phy_init(void)
{
struct armd1usb_phy_reg *phy_regs =
(struct armd1usb_phy_reg *)UTMI_PHY_BASE;
int timeout;
setbits_le32(&phy_regs->utmi_ctrl, INPKT_DELAY_SOF | PLL_PWR_UP);
udelay(1000);
setbits_le32(&phy_regs->utmi_ctrl, PHY_PWR_UP);
clrbits_le32(&phy_regs->utmi_pll, PLL_FBDIV_MASK | PLL_REFDIV_MASK);
setbits_le32(&phy_regs->utmi_pll, N_DIVIDER << PLL_FBDIV | M_DIVIDER);
setbits_le32(&phy_regs->utmi_tx, PHSEL_VAL << CK60_PHSEL);
/* Calibrate pll */
timeout = 10000;
while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0))
;
if (!timeout)
return -1;
udelay(200);
setbits_le32(&phy_regs->utmi_pll, VCOCAL_START);
udelay(400);
clrbits_le32(&phy_regs->utmi_pll, VCOCAL_START);
udelay(200);
setbits_le32(&phy_regs->utmi_tx, RCAL_START);
udelay(400);
clrbits_le32(&phy_regs->utmi_tx, RCAL_START);
timeout = 10000;
while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0))
;
if (!timeout)
return -1;
return 0;
}
/*
* Initialize USB host controller's UTMI Physical interface
*/
int utmi_init(void)
{
struct armd1mpmu_registers *mpmu_regs =
(struct armd1mpmu_registers *)ARMD1_MPMU_BASE;
struct armd1apmu_registers *apmu_regs =
(struct armd1apmu_registers *)ARMD1_APMU_BASE;
/* Turn on 26Mhz ref clock for UTMI PLL */
setbits_le32(&mpmu_regs->acgr, APB2_26M_EN | AP_26M);
/* USB Clock reset */
writel(USB_SPH_AXICLK_EN, &apmu_regs->usbcrc);
writel(USB_SPH_AXICLK_EN | USB_SPH_AXI_RST, &apmu_regs->usbcrc);
/* Initialize UTMI transceiver */
return utmi_phy_init();
}
|
