1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Microchip PIC32 MUSB "glue layer"
*
* Copyright (C) 2015, Microchip Technology Inc.
* Cristian Birsan <cristian.birsan@microchip.com>
* Purna Chandra Mandal <purna.mandal@microchip.com>
*
* Based on the dsps "glue layer" code.
*/
#include <common.h>
#include <dm/device_compat.h>
#include <linux/usb/musb.h>
#include "linux-compat.h"
#include "musb_core.h"
#include "musb_uboot.h"
DECLARE_GLOBAL_DATA_PTR;
#define PIC32_TX_EP_MASK 0x0f /* EP0 + 7 Tx EPs */
#define PIC32_RX_EP_MASK 0x0e /* 7 Rx EPs */
#define MUSB_SOFTRST 0x7f
#define MUSB_SOFTRST_NRST BIT(0)
#define MUSB_SOFTRST_NRSTX BIT(1)
#define USBCRCON 0
#define USBCRCON_USBWKUPEN BIT(0) /* Enable Wakeup Interrupt */
#define USBCRCON_USBRIE BIT(1) /* Enable Remote resume Interrupt */
#define USBCRCON_USBIE BIT(2) /* Enable USB General interrupt */
#define USBCRCON_SENDMONEN BIT(3) /* Enable Session End VBUS monitoring */
#define USBCRCON_BSVALMONEN BIT(4) /* Enable B-Device VBUS monitoring */
#define USBCRCON_ASVALMONEN BIT(5) /* Enable A-Device VBUS monitoring */
#define USBCRCON_VBUSMONEN BIT(6) /* Enable VBUS monitoring */
#define USBCRCON_PHYIDEN BIT(7) /* PHY ID monitoring enable */
#define USBCRCON_USBIDVAL BIT(8) /* USB ID value */
#define USBCRCON_USBIDOVEN BIT(9) /* USB ID override enable */
#define USBCRCON_USBWK BIT(24) /* USB Wakeup Status */
#define USBCRCON_USBRF BIT(25) /* USB Resume Status */
#define USBCRCON_USBIF BIT(26) /* USB General Interrupt Status */
/* PIC32 controller data */
struct pic32_musb_data {
struct musb_host_data mdata;
struct device dev;
void __iomem *musb_glue;
};
#define to_pic32_musb_data(d) \
container_of(d, struct pic32_musb_data, dev)
static void pic32_musb_disable(struct musb *musb)
{
/* no way to shut the controller */
}
static int pic32_musb_enable(struct musb *musb)
{
/* soft reset by NRSTx */
musb_writeb(musb->mregs, MUSB_SOFTRST, MUSB_SOFTRST_NRSTX);
/* set mode */
musb_platform_set_mode(musb, musb->board_mode);
return 0;
}
static irqreturn_t pic32_interrupt(int irq, void *hci)
{
struct musb *musb = hci;
irqreturn_t ret = IRQ_NONE;
u32 epintr, usbintr;
/* ack usb core interrupts */
musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
if (musb->int_usb)
musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb);
/* ack endpoint interrupts */
musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX) & PIC32_RX_EP_MASK;
if (musb->int_rx)
musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx);
musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX) & PIC32_TX_EP_MASK;
if (musb->int_tx)
musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx);
/* drop spurious RX and TX if device is disconnected */
if (musb->int_usb & MUSB_INTR_DISCONNECT) {
musb->int_tx = 0;
musb->int_rx = 0;
}
if (musb->int_tx || musb->int_rx || musb->int_usb)
ret = musb_interrupt(musb);
return ret;
}
static int pic32_musb_set_mode(struct musb *musb, u8 mode)
{
struct device *dev = musb->controller;
struct pic32_musb_data *pdata = to_pic32_musb_data(dev);
switch (mode) {
case MUSB_HOST:
clrsetbits_le32(pdata->musb_glue + USBCRCON,
USBCRCON_USBIDVAL, USBCRCON_USBIDOVEN);
break;
case MUSB_PERIPHERAL:
setbits_le32(pdata->musb_glue + USBCRCON,
USBCRCON_USBIDVAL | USBCRCON_USBIDOVEN);
break;
case MUSB_OTG:
dev_err(dev, "support for OTG is unimplemented\n");
break;
default:
dev_err(dev, "unsupported mode %d\n", mode);
return -EINVAL;
}
return 0;
}
static int pic32_musb_init(struct musb *musb)
{
struct pic32_musb_data *pdata = to_pic32_musb_data(musb->controller);
u32 ctrl, hwvers;
u8 power;
/* Returns zero if not clocked */
hwvers = musb_read_hwvers(musb->mregs);
if (!hwvers)
return -ENODEV;
/* Reset the musb */
power = musb_readb(musb->mregs, MUSB_POWER);
power = power | MUSB_POWER_RESET;
musb_writeb(musb->mregs, MUSB_POWER, power);
mdelay(100);
/* Start the on-chip PHY and its PLL. */
power = power & ~MUSB_POWER_RESET;
musb_writeb(musb->mregs, MUSB_POWER, power);
musb->isr = pic32_interrupt;
ctrl = USBCRCON_USBIF | USBCRCON_USBRF |
USBCRCON_USBWK | USBCRCON_USBIDOVEN |
USBCRCON_PHYIDEN | USBCRCON_USBIE |
USBCRCON_USBRIE | USBCRCON_USBWKUPEN |
USBCRCON_VBUSMONEN;
writel(ctrl, pdata->musb_glue + USBCRCON);
return 0;
}
/* PIC32 supports only 32bit read operation */
void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
{
void __iomem *fifo = hw_ep->fifo;
u32 val, rem = len % 4;
/* USB stack ensures dst is always 32bit aligned. */
readsl(fifo, dst, len / 4);
if (rem) {
dst += len & ~0x03;
val = musb_readl(fifo, 0);
memcpy(dst, &val, rem);
}
}
const struct musb_platform_ops pic32_musb_ops = {
.init = pic32_musb_init,
.set_mode = pic32_musb_set_mode,
.disable = pic32_musb_disable,
.enable = pic32_musb_enable,
};
/* PIC32 default FIFO config - fits in 8KB */
static struct musb_fifo_cfg pic32_musb_fifo_config[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 512, },
};
static struct musb_hdrc_config pic32_musb_config = {
.fifo_cfg = pic32_musb_fifo_config,
.fifo_cfg_size = ARRAY_SIZE(pic32_musb_fifo_config),
.multipoint = 1,
.dyn_fifo = 1,
.num_eps = 8,
.ram_bits = 11,
};
/* PIC32 has one MUSB controller which can be host or gadget */
static struct musb_hdrc_platform_data pic32_musb_plat = {
.mode = MUSB_HOST,
.config = &pic32_musb_config,
.power = 250, /* 500mA */
.platform_ops = &pic32_musb_ops,
};
static int musb_usb_probe(struct udevice *dev)
{
struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
struct pic32_musb_data *pdata = dev_get_priv(dev);
struct musb_host_data *mdata = &pdata->mdata;
struct fdt_resource mc, glue;
void *fdt = (void *)gd->fdt_blob;
int node = dev_of_offset(dev);
void __iomem *mregs;
int ret;
priv->desc_before_addr = true;
ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
"mc", &mc);
if (ret < 0) {
printf("pic32-musb: resource \"mc\" not found\n");
return ret;
}
ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
"control", &glue);
if (ret < 0) {
printf("pic32-musb: resource \"control\" not found\n");
return ret;
}
mregs = ioremap(mc.start, fdt_resource_size(&mc));
pdata->musb_glue = ioremap(glue.start, fdt_resource_size(&glue));
/* init controller */
#ifdef CONFIG_USB_MUSB_HOST
mdata->host = musb_init_controller(&pic32_musb_plat,
&pdata->dev, mregs);
if (!mdata->host)
return -EIO;
ret = musb_lowlevel_init(mdata);
#else
pic32_musb_plat.mode = MUSB_PERIPHERAL;
mdata->host = musb_register(&pic32_musb_plat, &pdata->dev, mregs);
if (!mdata->host)
return -EIO;
#endif
if ((ret == 0) && mdata->host)
printf("PIC32 MUSB OTG\n");
return ret;
}
static int musb_usb_remove(struct udevice *dev)
{
struct pic32_musb_data *pdata = dev_get_priv(dev);
musb_stop(pdata->mdata.host);
return 0;
}
static const struct udevice_id pic32_musb_ids[] = {
{ .compatible = "microchip,pic32mzda-usb" },
{ }
};
U_BOOT_DRIVER(usb_musb) = {
.name = "pic32-musb",
.id = UCLASS_USB,
.of_match = pic32_musb_ids,
.probe = musb_usb_probe,
.remove = musb_usb_remove,
#ifdef CONFIG_USB_MUSB_HOST
.ops = &musb_usb_ops,
#endif
.platdata_auto_alloc_size = sizeof(struct usb_platdata),
.priv_auto_alloc_size = sizeof(struct pic32_musb_data),
};
|
