diff options
| author | Wolfgang Denk <wd@denx.de> | 2011-09-04 21:12:18 +0200 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2011-09-04 21:12:18 +0200 |
| commit | 6dfbf49c6dc3687efbc6d7f9e25bb46ed2d6c833 (patch) | |
| tree | 154fe4abb74f5e03962506168c7d8c4869f7ac8a | |
| parent | dc344589ded4fb4d63ba7f0cdf670e2ffcf5e5a0 (diff) | |
| parent | 38a77c3adb3ee559b135217769f5c49f3c8b62c9 (diff) | |
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm: (145 commits)
beagleboard: enable HUB power on all variants of the BeagleBoard
dm3730: enable dpll5
ehci-hcd: Allow cleanups to happen gracefully on a timeout.
OMAP3: Add DSS driver for OMAP3
led: Remove state-saving of led for toggle functionality and add toggle option to led command
led: Fixed setting of STATUS_LED_BIT1 when led_name is 'all'
led: correct off/on locations in structure
led: added cmd_led to Makefile
BeagleBoard: fix LED 0/1 in driver
Corrected LED name match finding avoiding extraneous Usage printouts
BeagleBoard: config: updated default configuration
BeagleBoard: config: Enabled multibus support for I2C in configuration
BeagleBoard: config: add optargs/buddy/camera
BeagleBoard: config: increase command-line functionality
BeagleBoard: config: make mtest run
BeagleBoard: config: enable DSS
BeagleBoard: config: enable asix driver and dhcp
BeagleBoard: config: enable networking
BeagleBoard: config: decrease bootdelay to 2 seconds
BeagleBoard: config: use uImage.beagle for tftp
BeagleBoard: config: hardcode MAC for onboard SMSC
BeagleBoard: config: load kernel from MMC ext, not FAT
BeagleBoard: Configure DVI/S-video
BeagleBoard: Added userbutton command
BeagleBoard: turn off clocks in ehci_stop
USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor
beagleboard: add support for xM revision C
beagle: pass expansionboard name in bootargs
OMAP: Remove omapfb.debug=y from Beagle and Overo env settings
OMAP3 Beagle Pin Mux initialization glitch fix
da850: modifications for Logic PD Rev.3 AM18xx EVM
da850: fix the channel number for EMAC teardown init
da850: add support for Spectrum Digital AM18xx EVM
da850: add support to wake up DSP during board init
da850: modify the U-Boot prompt string
da850: add NOR boot mode support
da8xx: add support for multiple PLL controllers
da850: indicate cache usage disable in config file
dm365: modify boot prompt from dm365 to dm36x
dm365: disable cache usage due to coherency issues
dm6446: disable cache usage due to coherency issues
OMAP3: Remove legacy mmc driver
devkit8000: Use generic MMC driver
TI OMAP3 SDP3430: Use generic MMC driver
AM3517 CraneBoard: Use generic MMC driver
OMAP3: pandora: Use generic MMC driver
OMAP3: Zoom2: Use generic MMC driver
OMAP3: Zoom1: Use generic MMC driver
OMAP3: DIG297: Use generic MMC driver
OMAP3: CM-T35: Use generic MMC driver
am3517evm: Use generic MMC driver
omap3evm: Use generic MMC driver
omap3:clock: check cpu_family before enabling clks for IVA & CAM
omap3:clock: configure GFX clock to 200MHz for AM/DM37x
OMAP3/4: Increase console I/O buffer size
PXA: vpac270: Remove re-defined CONFIG_SYS_TEXT_BASE
PXA: Fix CSB226, fix monitor length
PXA: Fix Lubbock, remove redundant parenthesis
armv7: cache: remove flush on un-aligned invalidate
armv7: stronger barrier for cache-maintenance operations
omap: enable caches at system start-up
arm: do not force d-cache enable on all boards
ORIGEN: Add MMC SPL support
ARMV7: Add support for Samsung ORIGEN board
i2c:gpio:s5p: Enable I2C GPIO on the GONI target
i2c:gpio:s5p: I2C GPIO Software implementation (via soft_i2c)
Tegra2: Use clock and pinmux functions to simplify code
Tegra2: Add additional pin multiplexing features
Tegra2: Add more clock support
Tegra2: Add microsecond timer function
ARM: remove broken "at91rm9200dk" board
ARM: remove broken "m501sk" board
ARM: remove broken "kb9202" board
ARM: remove broken "csb637" board
ARM: remove broken "cmc_pu2" board
ARM: remove broken "at91cap9adk" board
ARM: remove broken "voiceblue" board
ARM: remove broken "smdk2400" board
ARM: remove broken "sbc2410x" board
ARM: remove broken "netstar" board
ARM: remove broken "mx1fs2" board
ARM: remove broken "lpd7a40x" boards
ARM: remove broken "edb93xx" boards
ARM: remove broken "B2" board
ARM: remove broken "armadillo" board
ARM: remove broken "assabet" board
ARM: versatile: drop warnings
IMX: scb9328: drop warnings
MX31: imx31_litekit: make use of GPIO framework
MX31: mx31ads: make use of GPIO framework
MX5: mx51evk: make use of GPIO framework
MX35: mx35pdk: make use of GPIO framework
MX5: mx53loco: make use of GPIO framework
MX5: mx53evk: make use of GPIO framework
MX5: vision2: make use of GPIO framework
MX5: mx53smd: make use of GPIO framework
MX5: mx53ard: make use of GPIO framework
MX25: zmx25: make use of GPIO framework
MX5: efikamx: make use of GPIO framework
MX31: QONG: make use of GPIO framework
MX35: make use of GPIO framework for MX35 processor
MX5: make use of GPIO framework for MX5 processor
MX31: make use of GPIO framework for MX31 processor
MX25: make use of GPIO framework for MX25 processor
IMX: uniform GPIO interface using GPIO framework
MX: MX35 / MX5: uniform clock command with powerpc
MX35: MX35PDK: support additional RAM on CSD1
mx53: ddr3: Update DD3 initialization
ARM: MX51: PLL errata workaround
ARM: versatilepb : drop warnings due to double definitions
omap4: increase SRAM budget to fix build error
omap4: fix build warning due to signed unsigned comparison
mkimage: Fix 'Unknown OMAP image type - 5'
omap: fix gpio related build breaks
gpio:samsung: s5p_ suffix add for GPIO functions (C210_universal)
SMDKV310: MMC SPL: Remove unwanted dummy functions
SMDKV310: Fix undefined reference error
SMDKV310: Fix build error for smdkv310 board
gpio:samsung s5p_ suffix add for GPIO functions
mmc: S5P: Support DMA restarts at buffer boundaries
SMDKV310: Fix host compilation of mkv310_image
arm: fix bd pointer dereference prior initialization
arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize
mx5: Remove CONFIG_L2_OFF and CONFIG_SYS_L2CACHE_OFF
MX31: removed warnings due to clock.h
integrator: convert to new build system
integratorcp: make the board compile
integratorap: remove hardcoded 32MB memory cmdline
...
275 files changed, 5023 insertions, 16970 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 7982c3663f..84faea2f25 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -564,10 +564,6 @@ Albert ARIBAUD <albert.u.boot@aribaud.net> edminiv2 ARM926EJS (Orion5x SoC) -Rowel Atienza <rowel@diwalabs.com> - - armadillo ARM720T - Stefano Babic <sbabic@denx.de> ea20 davinci @@ -632,7 +628,6 @@ Eric Cooper <ecc@cmu.edu> George G. Davis <gdavis@mvista.com> - assabet SA1100 gcplus SA1100 Wolfgang Denk <wd@denx.de> @@ -690,10 +685,6 @@ Grazvydas Ignotas <notasas@gmail.com> omap3_pandora ARM ARMV7 (OMAP3xx SoC) -Gary Jennejohn <garyj@denx.de> - - smdk2400 ARM920T - Matthias Kaehlcke <matthias@kaehlcke.net> edb9301 ARM920T (EP9301) edb9302 ARM920T (EP9302) @@ -716,6 +707,7 @@ Minkyu Kang <mk7.kang@samsung.com> Chander Kashyap <k.chander@samsung.com> + origen ARM ARMV7 (S5PC210 SoC) SMDKV310 ARM ARMV7 (S5PC210 SoC) Torsten Koschorrek <koschorrek@synertronixx.de> @@ -797,7 +789,6 @@ Manikandan Pillai <mani.pillai@ti.com> Stelian Pop <stelian.pop@leadtechdesign.com> - at91cap9adk ARM926EJS (AT91CAP9 SoC) at91sam9260ek ARM926EJS (AT91SAM9260 SoC) at91sam9261ek ARM926EJS (AT91SAM9261 SoC) at91sam9263ek ARM926EJS (AT91SAM9263 SoC) @@ -850,10 +841,6 @@ Michael Schwingen <michael@schwingen.org> actux4 xscale/ixp dvlhost xscale/ixp -Andrea Scian <andrea.scian@dave-tech.it> - - B2 ARM7TDMI (S3C44B0X) - Nick Thompson <nick.thompson@gefanuc.com> da830evm ARM926EJS (DA830/OMAP-L137) @@ -301,14 +301,9 @@ LIST_SA="$(boards_by_cpu sa1100)" ######################################################################### LIST_ARM7=" \ - ap7 \ - ap720t \ - armadillo \ - B2 \ ep7312 \ evb4510 \ impa7 \ - integratorap \ lpc2292sodimm \ modnet50 \ SMN42 \ @@ -320,38 +315,17 @@ LIST_ARM7=" \ LIST_ARM9=" \ a320evb \ - ap920t \ - ap922_XA10 \ - ap926ejs \ - ap946es \ - ap966 \ aspenite \ - cp920t \ - cp922_XA10 \ - cp926ejs \ - cp946es \ - cp966 \ da830evm \ da850evm \ - edb9301 \ - edb9302 \ - edb9302a \ - edb9307 \ - edb9307a \ - edb9312 \ - edb9315 \ - edb9315a \ edminiv2 \ guruplug \ imx27lite \ jadecpu \ km_kirkwood \ - lpd7a400 \ magnesium \ mv88f6281gtw_ge \ mx1ads \ - mx1fs2 \ - netstar \ nhk8815 \ nhk8815_onenand \ omap1510inn \ @@ -364,10 +338,8 @@ LIST_ARM9=" \ openrd_ultimate \ portl2 \ rd6281a \ - sbc2410x \ scb9328 \ sheevaplug \ - smdk2400 \ smdk2410 \ spear300 \ spear310 \ @@ -377,7 +349,6 @@ LIST_ARM9=" \ versatile \ versatileab \ versatilepb \ - voiceblue \ davinci_dvevm \ davinci_schmoogie \ davinci_sffsdr \ @@ -389,18 +360,9 @@ LIST_ARM9=" \ " ######################################################################### -## ARM10 Systems -######################################################################### -LIST_ARM10=" \ - integratorcp \ - cp1026 \ -" - -######################################################################### ## ARM11 Systems ######################################################################### LIST_ARM11=" \ - cp1136 \ omap2420h4 \ apollon \ imx31_litekit \ @@ -417,39 +379,14 @@ LIST_ARM11=" \ ######################################################################### ## ARMV7 Systems ######################################################################### -LIST_ARMV7=" \ - am3517_crane \ - am3517_evm \ - ca9x4_ct_vxp \ - devkit8000 \ - dig297 \ - igep0020 \ - igep0030 \ - mx51evk \ - omap3_beagle \ - omap3_overo \ - omap3_evm \ - omap3_pandora \ - omap3_sdp3430 \ - omap3_zoom1 \ - omap3_zoom2 \ - omap4_panda \ - omap4_sdp4430 \ - s5p_goni \ - smdkc100 \ -" + +LIST_ARMV7="$(boards_by_cpu armv7)" ######################################################################### ## AT91 Systems ######################################################################### -LIST_at91="$(boards_by_soc at91)\ - at91sam9m10g45ek \ - pm9g45 \ - SBC35_A9G20 \ - TNY_A9260 \ - TNY_A9G20 \ -" +LIST_at91="$(boards_by_soc at91)" ######################################################################### ## Xscale Systems @@ -798,78 +798,6 @@ M5485HFE_config : unconfig # ARM #======================================================================== -######################################################################### -## ARM926EJ-S Systems -######################################################################### - -at91sam9m10g45ek_nandflash_config \ -at91sam9m10g45ek_dataflash_config \ -at91sam9m10g45ek_dataflash_cs0_config \ -at91sam9m10g45ek_config \ -at91sam9g45ekes_nandflash_config \ -at91sam9g45ekes_dataflash_config \ -at91sam9g45ekes_dataflash_cs0_config \ -at91sam9g45ekes_config : unconfig - @mkdir -p $(obj)include - @if [ "$(findstring 9m10,$@)" ] ; then \ - echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ - else \ - echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ - fi; - @if [ "$(findstring _nandflash,$@)" ] ; then \ - echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - else \ - echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \ - fi; - @$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 - -pm9g45_config : unconfig - @mkdir -p $(obj)include - @$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91 - -SBC35_A9G20_NANDFLASH_config \ -SBC35_A9G20_EEPROM_config \ -SBC35_A9G20_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -n $@ -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91 - -TNY_A9G20_NANDFLASH_config \ -TNY_A9G20_EEPROM_config \ -TNY_A9G20_config \ -TNY_A9260_NANDFLASH_config \ -TNY_A9260_EEPROM_config \ -TNY_A9260_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91 - -######################################################################## -## ARM Integrator boards - see doc/README-integrator for more info. -integratorap_config \ -ap_config \ -ap966_config \ -ap922_config \ -ap922_XA10_config \ -ap7_config \ -ap720t_config \ -ap920t_config \ -ap926ejs_config \ -ap946es_config: unconfig - @board/armltd/integrator/split_by_variant.sh ap $@ - -integratorcp_config \ -cp_config \ -cp920t_config \ -cp926ejs_config \ -cp946es_config \ -cp1136_config \ -cp966_config \ -cp922_config \ -cp922_XA10_config \ -cp1026_config: unconfig - @board/armltd/integrator/split_by_variant.sh cp $@ - xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) omap1610inn_config \ @@ -923,16 +851,6 @@ tx25_config : unconfig @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk @$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25 -edb9301_config \ -edb9302_config \ -edb9302a_config \ -edb9307_config \ -edb9307a_config \ -edb9312_config \ -edb9315_config \ -edb9315a_config: unconfig - @$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx - ######################################################################### ## XScale Systems ######################################################################### @@ -1014,9 +932,7 @@ clean: $(obj)tools/ncb $(obj)tools/ubsha1 @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \ $(obj)board/matrix_vision/*/bootscript.img \ - $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \ $(obj)board/voiceblue/eeprom \ - $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \ $(obj)u-boot.lds \ $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \ $(obj)arch/blackfin/cpu/init.{lds,elf} diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c index 1b4ab75036..fcfaba5515 100644 --- a/arch/arm/cpu/arm1136/mx35/generic.c +++ b/arch/arm/cpu/arm1136/mx35/generic.c @@ -417,8 +417,8 @@ int do_mx35_showclocks(cmd_tbl_t *cmdtp, } U_BOOT_CMD( - clockinfo, CONFIG_SYS_MAXARGS, 1, do_mx35_showclocks, - "display clocks\n", + clocks, CONFIG_SYS_MAXARGS, 1, do_mx35_showclocks, + "display clocks", "" ); diff --git a/arch/arm/cpu/arm720t/cpu.c b/arch/arm/cpu/arm720t/cpu.c index 88c71bfe18..ff992aac52 100644 --- a/arch/arm/cpu/arm720t/cpu.c +++ b/arch/arm/cpu/arm720t/cpu.c @@ -82,9 +82,4 @@ static void cache_flush (void) asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i)); } -#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) - /* No specific cache setup for IntegratorAP/CM720T as yet */ - void icache_enable (void) - { - } #endif diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c index 4ad9b1fcc9..5ff32e3749 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c @@ -26,135 +26,131 @@ #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/gpio.h> -#include <asm/arch/io.h> +#include <asm/io.h> + +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif void at91_serial0_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTB, 19, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTB, 18, 0); /* RXD0 */ - writel(1 << AT91SAM9G45_ID_US0, &pmc->pcer); + at91_set_a_periph(AT91_PIO_PORTB, 18, PUP); /* RXD0 */ + writel(1 << ATMEL_ID_USART0, &pmc->pcer); } void at91_serial1_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD1 */ - at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* RXD1 */ - writel(1 << AT91SAM9G45_ID_US1, &pmc->pcer); + at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD1 */ + writel(1 << ATMEL_ID_USART1, &pmc->pcer); } void at91_serial2_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTD, 6, 1); /* TXD2 */ - at91_set_a_periph(AT91_PIO_PORTD, 7, 0); /* RXD2 */ - writel(1 << AT91SAM9G45_ID_US2, &pmc->pcer); + at91_set_a_periph(AT91_PIO_PORTD, 7, PUP); /* RXD2 */ + writel(1 << ATMEL_ID_USART2, &pmc->pcer); } -void at91_serial3_hw_init(void) +void at91_seriald_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* DRXD */ at91_set_a_periph(AT91_PIO_PORTB, 13, 1); /* DTXD */ - writel(1 << AT91_ID_SYS, &pmc->pcer); -} - -void at91_serial_hw_init(void) -{ -#ifdef CONFIG_USART0 - at91_serial0_hw_init(); -#endif - -#ifdef CONFIG_USART1 - at91_serial1_hw_init(); -#endif - -#ifdef CONFIG_USART2 - at91_serial2_hw_init(); -#endif - -#ifdef CONFIG_USART3 /* DBGU */ - at91_serial3_hw_init(); -#endif + writel(1 << ATMEL_ID_SYS, &pmc->pcer); } -#ifdef CONFIG_ATMEL_SPI +#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) void at91_spi0_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* SPI0_SPCK */ + at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI0_SPCK */ /* Enable clock */ - writel(1 << AT91SAM9G45_ID_SPI0, &pmc->pcer); + writel(1 << ATMEL_ID_SPI0, &pmc->pcer); if (cs_mask & (1 << 0)) { - at91_set_a_periph(AT91_PIO_PORTB, 3, 0); + at91_set_a_periph(AT91_PIO_PORTB, 3, 1); } if (cs_mask & (1 << 1)) { - at91_set_b_periph(AT91_PIO_PORTB, 18, 0); + at91_set_b_periph(AT91_PIO_PORTB, 18, 1); } if (cs_mask & (1 << 2)) { - at91_set_b_periph(AT91_PIO_PORTB, 19, 0); + at91_set_b_periph(AT91_PIO_PORTB, 19, 1); } if (cs_mask & (1 << 3)) { - at91_set_b_periph(AT91_PIO_PORTD, 27, 0); + at91_set_b_periph(AT91_PIO_PORTD, 27, 1); } if (cs_mask & (1 << 4)) { - at91_set_pio_output(AT91_PIO_PORTB, 3, 0); + at91_set_pio_output(AT91_PIO_PORTB, 3, 1); } if (cs_mask & (1 << 5)) { - at91_set_pio_output(AT91_PIO_PORTB, 18, 0); + at91_set_pio_output(AT91_PIO_PORTB, 18, 1); } if (cs_mask & (1 << 6)) { - at91_set_pio_output(AT91_PIO_PORTB, 19, 0); + at91_set_pio_output(AT91_PIO_PORTB, 19, 1); } if (cs_mask & (1 << 7)) { - at91_set_pio_output(AT91_PIO_PORTD, 27, 0); + at91_set_pio_output(AT91_PIO_PORTD, 27, 1); } } void at91_spi1_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* SPI1_MISO */ - at91_set_a_periph(AT91_PIO_PORTB, 15, 0); /* SPI1_MOSI */ - at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* SPI1_SPCK */ + at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 15, PUP); /* SPI1_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 16, PUP); /* SPI1_SPCK */ /* Enable clock */ - writel(1 << AT91SAM9G45_ID_SPI1, &pmc->pcer); + writel(1 << ATMEL_ID_SPI1, &pmc->pcer); if (cs_mask & (1 << 0)) { - at91_set_a_periph(AT91_PIO_PORTB, 17, 0); + at91_set_a_periph(AT91_PIO_PORTB, 17, 1); } if (cs_mask & (1 << 1)) { - at91_set_b_periph(AT91_PIO_PORTD, 28, 0); + at91_set_b_periph(AT91_PIO_PORTD, 28, 1); } if (cs_mask & (1 << 2)) { - at91_set_a_periph(AT91_PIO_PORTD, 18, 0); + at91_set_a_periph(AT91_PIO_PORTD, 18, 1); } if (cs_mask & (1 << 3)) { - at91_set_a_periph(AT91_PIO_PORTD, 19, 0); + at91_set_a_periph(AT91_PIO_PORTD, 19, 1); } if (cs_mask & (1 << 4)) { - at91_set_pio_output(AT91_PIO_PORTB, 17, 0); + at91_set_pio_output(AT91_PIO_PORTB, 17, 1); } if (cs_mask & (1 << 5)) { - at91_set_pio_output(AT91_PIO_PORTD, 28, 0); + at91_set_pio_output(AT91_PIO_PORTD, 28, 1); } if (cs_mask & (1 << 6)) { - at91_set_pio_output(AT91_PIO_PORTD, 18, 0); + at91_set_pio_output(AT91_PIO_PORTD, 18, 1); } if (cs_mask & (1 << 7)) { - at91_set_pio_output(AT91_PIO_PORTD, 19, 0); + at91_set_pio_output(AT91_PIO_PORTD, 19, 1); } } diff --git a/arch/arm/cpu/arm926ejs/davinci/cpu.c b/arch/arm/cpu/arm926ejs/davinci/cpu.c index 8b57205ea8..b705dfd318 100644 --- a/arch/arm/cpu/arm926ejs/davinci/cpu.c +++ b/arch/arm/cpu/arm926ejs/davinci/cpu.c @@ -37,6 +37,7 @@ #define PLLC_PLLDIV4 0x160 #define PLLC_PLLDIV5 0x164 #define PLLC_PLLDIV6 0x168 +#define PLLC_PLLDIV7 0x16c #define PLLC_PLLDIV8 0x170 #define PLLC_PLLDIV9 0x174 @@ -61,11 +62,9 @@ #endif #ifdef CONFIG_SOC_DA8XX -const dv_reg * const sysdiv[7] = { - &davinci_pllc_regs->plldiv1, &davinci_pllc_regs->plldiv2, - &davinci_pllc_regs->plldiv3, &davinci_pllc_regs->plldiv4, - &davinci_pllc_regs->plldiv5, &davinci_pllc_regs->plldiv6, - &davinci_pllc_regs->plldiv7 +unsigned int sysdiv[9] = { + PLLC_PLLDIV1, PLLC_PLLDIV2, PLLC_PLLDIV3, PLLC_PLLDIV4, PLLC_PLLDIV5, + PLLC_PLLDIV6, PLLC_PLLDIV7, PLLC_PLLDIV8, PLLC_PLLDIV9 }; int clk_get(enum davinci_clk_ids id) @@ -74,19 +73,27 @@ int clk_get(enum davinci_clk_ids id) int pllm; int post_div; int pll_out; + unsigned int pll_base; pll_out = CONFIG_SYS_OSCIN_FREQ; if (id == DAVINCI_AUXCLK_CLKID) goto out; + if ((id >> 16) == 1) + pll_base = (unsigned int)davinci_pllc1_regs; + else + pll_base = (unsigned int)davinci_pllc0_regs; + + id &= 0xFFFF; + /* * Lets keep this simple. Combining operations can result in * unexpected approximations */ - pre_div = (readl(&davinci_pllc_regs->prediv) & - DAVINCI_PLLC_DIV_MASK) + 1; - pllm = readl(&davinci_pllc_regs->pllm) + 1; + pre_div = (readl(pll_base + PLLC_PREDIV) & + DAVINCI_PLLC_DIV_MASK) + 1; + pllm = readl(pll_base + PLLC_PLLM) + 1; pll_out /= pre_div; pll_out *= pllm; @@ -94,15 +101,16 @@ int clk_get(enum davinci_clk_ids id) if (id == DAVINCI_PLLM_CLKID) goto out; - post_div = (readl(&davinci_pllc_regs->postdiv) & - DAVINCI_PLLC_DIV_MASK) + 1; + post_div = (readl(pll_base + PLLC_POSTDIV) & + DAVINCI_PLLC_DIV_MASK) + 1; pll_out /= post_div; if (id == DAVINCI_PLLC_CLKID) goto out; - pll_out /= (readl(sysdiv[id - 1]) & DAVINCI_PLLC_DIV_MASK) + 1; + pll_out /= (readl(pll_base + sysdiv[id - 1]) & + DAVINCI_PLLC_DIV_MASK) + 1; out: return pll_out; diff --git a/arch/arm/cpu/armv7/cache_v7.c b/arch/arm/cpu/armv7/cache_v7.c index 3e1e1bf877..1b4e808a79 100644 --- a/arch/arm/cpu/armv7/cache_v7.c +++ b/arch/arm/cpu/armv7/cache_v7.c @@ -81,8 +81,8 @@ static void v7_inval_dcache_level_setway(u32 level, u32 num_sets, : : "r" (setway)); } } - /* DMB to make sure the operation is complete */ - CP15DMB; + /* DSB to make sure the operation is complete */ + CP15DSB; } static void v7_clean_inval_dcache_level_setway(u32 level, u32 num_sets, @@ -108,8 +108,8 @@ static void v7_clean_inval_dcache_level_setway(u32 level, u32 num_sets, : : "r" (setway)); } } - /* DMB to make sure the operation is complete */ - CP15DMB; + /* DSB to make sure the operation is complete */ + CP15DSB; } static void v7_maint_dcache_level_setway(u32 level, u32 operation) @@ -181,21 +181,23 @@ static void v7_dcache_inval_range(u32 start, u32 stop, u32 line_len) u32 mva; /* - * If start address is not aligned to cache-line flush the first - * line to prevent affecting somebody else's buffer + * If start address is not aligned to cache-line do not + * invalidate the first cache-line */ if (start & (line_len - 1)) { - v7_dcache_clean_inval_range(start, start + 1, line_len); + printf("ERROR: %s - start address is not aligned - 0x%08x\n", + __func__, start); /* move to next cache line */ start = (start + line_len - 1) & ~(line_len - 1); } /* - * If stop address is not aligned to cache-line flush the last - * line to prevent affecting somebody else's buffer + * If stop address is not aligned to cache-line do not + * invalidate the last cache-line */ if (stop & (line_len - 1)) { - v7_dcache_clean_inval_range(stop, stop + 1, line_len); + printf("ERROR: %s - stop address is not aligned - 0x%08x\n", + __func__, stop); /* align to the beginning of this cache line */ stop &= ~(line_len - 1); } @@ -227,8 +229,8 @@ static void v7_dcache_maint_range(u32 start, u32 stop, u32 range_op) break; } - /* DMB to make sure the operation is complete */ - CP15DMB; + /* DSB to make sure the operation is complete */ + CP15DSB; } /* Invalidate TLB */ diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c index 0b04a8819a..00610a0d59 100644 --- a/arch/arm/cpu/armv7/mx5/clock.c +++ b/arch/arm/cpu/armv7/mx5/clock.c @@ -288,7 +288,7 @@ int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) /***************************************************/ U_BOOT_CMD( - clockinfo, CONFIG_SYS_MAXARGS, 1, do_mx5_showclocks, - "display clocks\n", + clocks, CONFIG_SYS_MAXARGS, 1, do_mx5_showclocks, + "display clocks", "" ); diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 94de9f1d61..6c66b42619 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -121,6 +121,35 @@ beq 1b .endm +.macro setup_pll_errata pll, freq + ldr r2, =\pll + mov r1, #0x0 + str r1, [r2, #PLL_DP_CONFIG] /* Disable auto-restart AREN bit */ + ldr r1, =0x00001236 + str r1, [r2, #PLL_DP_CTL] /* Restart PLL with PLM=1 */ +1: ldr r1, [r2, #PLL_DP_CTL] /* Wait for lock */ + ands r1, r1, #0x1 + beq 1b + + ldr r5, \freq + str r5, [r2, #PLL_DP_MFN] /* Modify MFN value */ + str r5, [r2, #PLL_DP_HFS_MFN] + + mov r1, #0x1 + str r1, [r2, #PLL_DP_CONFIG] /* Reload MFN value */ + +2: ldr r1, [r2, #PLL_DP_CONFIG] + tst r1, #1 + bne 2b + + ldr r1, =100 /* Wait at least 4 us */ +3: subs r1, r1, #1 + bge 3b + + mov r1, #0x2 + str r1, [r2, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */ +.endm + .macro init_clock ldr r0, =CCM_BASE_ADDR @@ -157,7 +186,12 @@ mov r1, #0x4 str r1, [r0, #CLKCTL_CCSR] +#if defined(CONFIG_MX51_PLL_ERRATA) + setup_pll PLL1_BASE_ADDR, 864 + setup_pll_errata PLL1_BASE_ADDR, W_DP_MFN_800_DIT +#else setup_pll PLL1_BASE_ADDR, 800 +#endif #if defined(CONFIG_MX51) setup_pll PLL3_BASE_ADDR, 665 @@ -287,6 +321,10 @@ lowlevel_init: mov pc,lr /* Board level setting value */ +W_DP_OP_864: .word DP_OP_864 +W_DP_MFD_864: .word DP_MFD_864 +W_DP_MFN_864: .word DP_MFN_864 +W_DP_MFN_800_DIT: .word DP_MFN_800_DIT W_DP_OP_800: .word DP_OP_800 W_DP_MFD_800: .word DP_MFD_800 W_DP_MFN_800: .word DP_MFN_800 diff --git a/arch/arm/cpu/armv7/omap-common/gpio.c b/arch/arm/cpu/armv7/omap-common/gpio.c index f4c347941d..2fcaf5a9f8 100644 --- a/arch/arm/cpu/armv7/omap-common/gpio.c +++ b/arch/arm/cpu/armv7/omap-common/gpio.c @@ -36,7 +36,7 @@ * published by the Free Software Foundation. */ #include <common.h> -#include <asm/omap_gpio.h> +#include <asm/arch/gpio.h> #include <asm/io.h> #include <asm/errno.h> diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index 4aaf97b335..0448bc93ff 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -38,7 +38,7 @@ #include <asm/arch/mem.h> #include <asm/cache.h> #include <asm/armv7.h> -#include <asm/omap_gpio.h> +#include <asm/arch/gpio.h> /* Declarations */ extern omap3_sysinfo sysinfo; @@ -402,3 +402,11 @@ void v7_outer_cache_disable(void) omap3_update_aux_cr(0, 0x2); } #endif + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c index 3d38d08ccb..e0d65c7a4a 100644 --- a/arch/arm/cpu/armv7/omap3/clock.c +++ b/arch/arm/cpu/armv7/omap3/clock.c @@ -399,7 +399,7 @@ static void dpll3_init_36xx(u32 sil_index, u32 clk_index) /* L3 */ sr32(&prcm_base->clksel_core, 0, 2, CORE_L3_DIV); /* GFX */ - sr32(&prcm_base->clksel_gfx, 0, 3, GFX_DIV); + sr32(&prcm_base->clksel_gfx, 0, 3, GFX_DIV_36X); /* RESET MGR */ sr32(&prcm_base->clksel_wkup, 1, 2, WKUP_RSM); /* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */ @@ -579,6 +579,7 @@ void prcm_init(void) dpll3_init_36xx(0, clk_index); dpll4_init_36xx(0, clk_index); + dpll5_init_34xx(0, clk_index); iva_init_36xx(0, clk_index); mpu_init_36xx(0, clk_index); @@ -607,7 +608,9 @@ void prcm_init(void) dpll3_init_34xx(sil_index, clk_index); dpll4_init_34xx(sil_index, clk_index); dpll5_init_34xx(sil_index, clk_index); - iva_init_34xx(sil_index, clk_index); + if (get_cpu_family() != CPU_AM35XX) + iva_init_34xx(sil_index, clk_index); + mpu_init_34xx(sil_index, clk_index); /* Lock MPU DPLL to set frequency */ @@ -674,7 +677,9 @@ void per_clocks_enable(void) /* Enable the ICLK for 32K Sync Timer as its used in udelay */ sr32(&prcm_base->iclken_wkup, 2, 1, 0x1); - sr32(&prcm_base->fclken_iva2, 0, 32, FCK_IVA2_ON); + if (get_cpu_family() != CPU_AM35XX) + sr32(&prcm_base->fclken_iva2, 0, 32, FCK_IVA2_ON); + sr32(&prcm_base->fclken1_core, 0, 32, FCK_CORE1_ON); sr32(&prcm_base->iclken1_core, 0, 32, ICK_CORE1_ON); sr32(&prcm_base->iclken2_core, 0, 32, ICK_CORE2_ON); @@ -682,8 +687,10 @@ void per_clocks_enable(void) sr32(&prcm_base->iclken_wkup, 0, 32, ICK_WKUP_ON); sr32(&prcm_base->fclken_dss, 0, 32, FCK_DSS_ON); sr32(&prcm_base->iclken_dss, 0, 32, ICK_DSS_ON); - sr32(&prcm_base->fclken_cam, 0, 32, FCK_CAM_ON); - sr32(&prcm_base->iclken_cam, 0, 32, ICK_CAM_ON); + if (get_cpu_family() != CPU_AM35XX) { + sr32(&prcm_base->fclken_cam, 0, 32, FCK_CAM_ON); + sr32(&prcm_base->iclken_cam, 0, 32, ICK_CAM_ON); + } sr32(&prcm_base->fclken_per, 0, 32, FCK_PER_ON); sr32(&prcm_base->iclken_per, 0, 32, ICK_PER_ON); diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c index 5943d61fc2..69a0ce5513 100644 --- a/arch/arm/cpu/armv7/omap4/board.c +++ b/arch/arm/cpu/armv7/omap4/board.c @@ -33,7 +33,7 @@ #include <asm/arch/sys_proto.h> #include <asm/sizes.h> #include <asm/arch/emif.h> -#include <asm/omap_gpio.h> +#include <asm/arch/gpio.h> #include "omap4_mux_data.h" DECLARE_GLOBAL_DATA_PTR; @@ -299,3 +299,11 @@ void v7_outer_cache_disable(void) set_pl310_ctrl_reg(0); } #endif + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif diff --git a/arch/arm/cpu/armv7/tegra2/Makefile b/arch/arm/cpu/armv7/tegra2/Makefile index f1ea915851..f673f036f9 100644 --- a/arch/arm/cpu/armv7/tegra2/Makefile +++ b/arch/arm/cpu/armv7/tegra2/Makefile @@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o SOBJS := lowlevel_init.o -COBJS := ap20.o board.o sys_info.o timer.o +COBJS := ap20.o board.o clock.o pinmux.o sys_info.o timer.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/tegra2/ap20.c b/arch/arm/cpu/armv7/tegra2/ap20.c index 60dd5dfc08..dc5f984d6f 100644 --- a/arch/arm/cpu/armv7/tegra2/ap20.c +++ b/arch/arm/cpu/armv7/tegra2/ap20.c @@ -25,6 +25,7 @@ #include <asm/io.h> #include <asm/arch/tegra2.h> #include <asm/arch/clk_rst.h> +#include <asm/arch/clock.h> #include <asm/arch/pmc.h> #include <asm/arch/pinmux.h> #include <asm/arch/scu.h> @@ -35,33 +36,32 @@ u32 s_first_boot = 1; void init_pllx(void) { struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + struct clk_pll *pll = &clkrst->crc_pll[CLOCK_PLL_ID_XCPU]; u32 reg; /* If PLLX is already enabled, just return */ - reg = readl(&clkrst->crc_pllx_base); - if (reg & PLL_ENABLE) + if (readl(&pll->pll_base) & PLL_ENABLE_MASK) return; /* Set PLLX_MISC */ - reg = CPCON; /* CPCON[11:8] = 0001 */ - writel(reg, &clkrst->crc_pllx_misc); + writel(1 << PLL_CPCON_SHIFT, &pll->pll_misc); /* Use 12MHz clock here */ - reg = (PLL_BYPASS | PLL_DIVM); - reg |= (1000 << 8); /* DIVN = 0x3E8 */ - writel(reg, &clkrst->crc_pllx_base); + reg = PLL_BYPASS_MASK | (12 << PLL_DIVM_SHIFT); + reg |= 1000 << PLL_DIVN_SHIFT; + writel(reg, &pll->pll_base); - reg |= PLL_ENABLE; - writel(reg, &clkrst->crc_pllx_base); + reg |= PLL_ENABLE_MASK; + writel(reg, &pll->pll_base); - reg &= ~PLL_BYPASS; - writel(reg, &clkrst->crc_pllx_base); + reg &= ~PLL_BYPASS_MASK; + writel(reg, &pll->pll_base); } static void enable_cpu_clock(int enable) { struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - u32 reg, clk; + u32 clk; /* * NOTE: @@ -83,27 +83,19 @@ static void enable_cpu_clock(int enable) writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div); } - /* Fetch the register containing the main CPU complex clock enable */ - reg = readl(&clkrst->crc_clk_out_enb_l); - reg |= CLK_ENB_CPU; - /* * Read the register containing the individual CPU clock enables and * always stop the clock to CPU 1. */ clk = readl(&clkrst->crc_clk_cpu_cmplx); - clk |= CPU1_CLK_STP; - - if (enable) { - /* Unstop the CPU clock */ - clk &= ~CPU0_CLK_STP; - } else { - /* Stop the CPU clock */ - clk |= CPU0_CLK_STP; - } + clk |= 1 << CPU1_CLK_STP_SHIFT; + /* Stop/Unstop the CPU clock */ + clk &= ~CPU0_CLK_STP_MASK; + clk |= !enable << CPU0_CLK_STP_SHIFT; writel(clk, &clkrst->crc_clk_cpu_cmplx); - writel(reg, &clkrst->crc_clk_out_enb_l); + + clock_enable(PERIPH_ID_CPU); } static int is_cpu_powered(void) @@ -178,9 +170,6 @@ static void enable_cpu_power_rail(void) static void reset_A9_cpu(int reset) { - struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - u32 reg, cpu; - /* * NOTE: Regardless of whether the request is to hold the CPU in reset * or take it out of reset, every processor in the CPU complex @@ -189,48 +178,22 @@ static void reset_A9_cpu(int reset) * are multiple processors in the CPU complex. */ - /* Hold CPU 1 in reset */ - cpu = SET_DBGRESET1 | SET_DERESET1 | SET_CPURESET1; - writel(cpu, &clkrst->crc_cpu_cmplx_set); - - reg = readl(&clkrst->crc_rst_dev_l); - if (reset) { - /* Now place CPU0 into reset */ - cpu |= SET_DBGRESET0 | SET_DERESET0 | SET_CPURESET0; - writel(cpu, &clkrst->crc_cpu_cmplx_set); - - /* Enable master CPU reset */ - reg |= SWR_CPU_RST; - } else { - /* Take CPU0 out of reset */ - cpu = CLR_DBGRESET0 | CLR_DERESET0 | CLR_CPURESET0; - writel(cpu, &clkrst->crc_cpu_cmplx_clr); - - /* Disable master CPU reset */ - reg &= ~SWR_CPU_RST; - } + /* Hold CPU 1 in reset, and CPU 0 if asked */ + reset_cmplx_set_enable(1, crc_rst_cpu | crc_rst_de | crc_rst_debug, 1); + reset_cmplx_set_enable(0, crc_rst_cpu | crc_rst_de | crc_rst_debug, + reset); - writel(reg, &clkrst->crc_rst_dev_l); + /* Enable/Disable master CPU reset */ + reset_set_enable(PERIPH_ID_CPU, reset); } static void clock_enable_coresight(int enable) { struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - u32 rst, clk, src; - - rst = readl(&clkrst->crc_rst_dev_u); - clk = readl(&clkrst->crc_clk_out_enb_u); - - if (enable) { - rst &= ~SWR_CSITE_RST; - clk |= CLK_ENB_CSITE; - } else { - rst |= SWR_CSITE_RST; - clk &= ~CLK_ENB_CSITE; - } + u32 rst, src; - writel(clk, &clkrst->crc_clk_out_enb_u); - writel(rst, &clkrst->crc_rst_dev_u); + clock_set_enable(PERIPH_ID_CORESIGHT, enable); + reset_set_enable(PERIPH_ID_CORESIGHT, !enable); if (enable) { /* diff --git a/arch/arm/cpu/armv7/tegra2/clock.c b/arch/arm/cpu/armv7/tegra2/clock.c new file mode 100644 index 0000000000..67eed14044 --- /dev/null +++ b/arch/arm/cpu/armv7/tegra2/clock.c @@ -0,0 +1,158 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* Tegra2 Clock control functions */ + +#include <asm/io.h> +#include <asm/arch/clk_rst.h> +#include <asm/arch/clock.h> +#include <asm/arch/timer.h> +#include <asm/arch/tegra2.h> +#include <common.h> + +#ifdef DEBUG +#define assert(x) \ + ({ if (!(x)) printf("Assertion failure '%s' %s line %d\n", \ + #x, __FILE__, __LINE__); }) +#else +#define assert(x) +#endif + +/* + * Get the oscillator frequency, from the corresponding hardware configuration + * field. + */ +enum clock_osc_freq clock_get_osc_freq(void) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg; + + reg = readl(&clkrst->crc_osc_ctrl); + return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT; +} + +unsigned long clock_start_pll(enum clock_pll_id clkid, u32 divm, u32 divn, + u32 divp, u32 cpcon, u32 lfcon) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 data; + struct clk_pll *pll; + + assert(clock_pll_id_isvalid(clkid)); + pll = &clkrst->crc_pll[clkid]; + + /* + * We cheat by treating all PLL (except PLLU) in the same fashion. + * This works only because: + * - same fields are always mapped at same offsets, except DCCON + * - DCCON is always 0, doesn't conflict + * - M,N, P of PLLP values are ignored for PLLP + */ + data = (cpcon << PLL_CPCON_SHIFT) | (lfcon << PLL_LFCON_SHIFT); + writel(data, &pll->pll_misc); + + data = (divm << PLL_DIVM_SHIFT) | (divn << PLL_DIVN_SHIFT) | + (0 << PLL_BYPASS_SHIFT) | (1 << PLL_ENABLE_SHIFT); + + if (clkid == CLOCK_PLL_ID_USB) + data |= divp << PLLU_VCO_FREQ_SHIFT; + else + data |= divp << PLL_DIVP_SHIFT; + writel(data, &pll->pll_base); + + /* calculate the stable time */ + return timer_get_us() + CLOCK_PLL_STABLE_DELAY_US; +} + +void clock_set_enable(enum periph_id periph_id, int enable) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 *clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)]; + u32 reg; + + /* Enable/disable the clock to this peripheral */ + assert(clock_periph_id_isvalid(periph_id)); + reg = readl(clk); + if (enable) + reg |= PERIPH_MASK(periph_id); + else + reg &= ~PERIPH_MASK(periph_id); + writel(reg, clk); +} + +void clock_enable(enum periph_id clkid) +{ + clock_set_enable(clkid, 1); +} + +void clock_disable(enum periph_id clkid) +{ + clock_set_enable(clkid, 0); +} + +void reset_set_enable(enum periph_id periph_id, int enable) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 *reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)]; + u32 reg; + + /* Enable/disable reset to the peripheral */ + assert(clock_periph_id_isvalid(periph_id)); + reg = readl(reset); + if (enable) + reg |= PERIPH_MASK(periph_id); + else + reg &= ~PERIPH_MASK(periph_id); + writel(reg, reset); +} + +void reset_periph(enum periph_id periph_id, int us_delay) +{ + /* Put peripheral into reset */ + reset_set_enable(periph_id, 1); + udelay(us_delay); + + /* Remove reset */ + reset_set_enable(periph_id, 0); + + udelay(us_delay); +} + +void reset_cmplx_set_enable(int cpu, int which, int reset) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 mask; + + /* Form the mask, which depends on the cpu chosen. Tegra2 has 2 */ + assert(cpu >= 0 && cpu < 2); + mask = which << cpu; + + /* either enable or disable those reset for that CPU */ + if (reset) + writel(mask, &clkrst->crc_cpu_cmplx_set); + else + writel(mask, &clkrst->crc_cpu_cmplx_clr); +} diff --git a/board/atmel/at91cap9adk/led.c b/arch/arm/cpu/armv7/tegra2/pinmux.c index 14aea994e9..5594ab80f6 100644 --- a/board/atmel/at91cap9adk/led.c +++ b/arch/arm/cpu/armv7/tegra2/pinmux.c @@ -1,8 +1,5 @@ /* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian.pop@leadtechdesign.com> - * Lead Tech Design <www.leadtechdesign.com> - * + * Copyright (c) 2011 The Chromium OS Authors. * See file CREDITS for list of people who contributed to this * project. * @@ -22,22 +19,34 @@ * MA 02111-1307 USA */ +/* Tegra2 pin multiplexing functions */ + +#include <asm/io.h> +#include <asm/arch/tegra2.h> +#include <asm/arch/pinmux.h> #include <common.h> -#include <asm/arch/at91cap9.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/gpio.h> -#include <asm/arch/io.h> -void coloured_LED_init(void) + +void pinmux_set_tristate(enum pmux_pin pin, int enable) { - /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD); + struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *tri = &pmt->pmt_tri[TRISTATE_REG(pin)]; + u32 reg; + + reg = readl(tri); + if (enable) + reg |= TRISTATE_MASK(pin); + else + reg &= ~TRISTATE_MASK(pin); + writel(reg, tri); +} - at91_set_gpio_output(CONFIG_RED_LED, 1); - at91_set_gpio_output(CONFIG_GREEN_LED, 1); - at91_set_gpio_output(CONFIG_YELLOW_LED, 1); +void pinmux_tristate_enable(enum pmux_pin pin) +{ + pinmux_set_tristate(pin, 1); +} - at91_set_gpio_output(CONFIG_RED_LED, 0); - at91_set_gpio_output(CONFIG_GREEN_LED, 1); - at91_set_gpio_output(CONFIG_YELLOW_LED, 1); +void pinmux_tristate_disable(enum pmux_pin pin) +{ + pinmux_set_tristate(pin, 0); } diff --git a/arch/arm/cpu/armv7/tegra2/timer.c b/arch/arm/cpu/armv7/tegra2/timer.c index 0b9fa6418c..b12b12cc30 100644 --- a/arch/arm/cpu/armv7/tegra2/timer.c +++ b/arch/arm/cpu/armv7/tegra2/timer.c @@ -38,13 +38,12 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/tegra2.h> +#include <asm/arch/timer.h> DECLARE_GLOBAL_DATA_PTR; -struct timerus *timer_base = (struct timerus *)NV_PA_TMRUS_BASE; - /* counter runs at 1MHz */ -#define TIMER_CLK (1000000) +#define TIMER_CLK 1000000 #define TIMER_LOAD_VAL 0xffffffff /* timer without interrupts */ @@ -57,10 +56,10 @@ ulong get_timer(ulong base) void __udelay(unsigned long usec) { long tmo = usec * (TIMER_CLK / 1000) / 1000; - unsigned long now, last = readl(&timer_base->cntr_1us); + unsigned long now, last = timer_get_us(); while (tmo > 0) { - now = readl(&timer_base->cntr_1us); + now = timer_get_us(); if (last > now) /* count up timer overflow */ tmo -= TIMER_LOAD_VAL - last + now; else @@ -74,7 +73,7 @@ ulong get_timer_masked(void) ulong now; /* current tick value */ - now = readl(&timer_base->cntr_1us) / (TIMER_CLK / CONFIG_SYS_HZ); + now = timer_get_us() / (TIMER_CLK / CONFIG_SYS_HZ); if (now >= gd->lastinc) /* normal mode (non roll) */ /* move stamp forward with absolute diff ticks */ @@ -103,3 +102,10 @@ ulong get_tbclk(void) { return CONFIG_SYS_HZ; } + +unsigned long timer_get_us(void) +{ + struct timerus *timer_base = (struct timerus *)NV_PA_TMRUS_BASE; + + return readl(&timer_base->cntr_1us); +} diff --git a/arch/arm/include/asm/arch-at91/at91sam9g45.h b/arch/arm/include/asm/arch-at91/at91sam9g45.h index 364b86c88f..1aeedc04a1 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9g45.h +++ b/arch/arm/include/asm/arch-at91/at91sam9g45.h @@ -129,10 +129,24 @@ #define ATMEL_BASE_VDEC 0x00900000 /* Video Decoder Controller */ /* + * External memory + */ +#define ATMEL_BASE_CS0 0x10000000 +#define ATMEL_BASE_CS1 0x20000000 +#define ATMEL_BASE_CS2 0x30000000 +#define ATMEL_BASE_CS3 0x40000000 +#define ATMEL_BASE_CS4 0x50000000 +#define ATMEL_BASE_CS5 0x60000000 +#define ATMEL_BASE_CS6 0x70000000 +#define ATMEL_BASE_CS7 0x80000000 + +/* * Other misc defines */ #define ATMEL_PIO_PORTS 5 /* this SoCs has 5 PIO */ - +#define ATMEL_BASE_PIO ATMEL_BASE_PIOA +#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP +#define ATMEL_ID_UHP ATMEL_ID_UHPHS /* * Cpu Name */ diff --git a/arch/arm/include/asm/arch-at91/at91sam9g45_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9g45_matrix.h index 1620e1baff..01c9c636e1 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9g45_matrix.h +++ b/arch/arm/include/asm/arch-at91/at91sam9g45_matrix.h @@ -15,139 +15,81 @@ #ifndef AT91SAM9G45_MATRIX_H #define AT91SAM9G45_MATRIX_H -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ -#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ -#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ -#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) -#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0) -#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0) -#define AT91_MATRIX_ULBT_128 (7 << 0) +#ifndef __ASSEMBLY__ -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ +struct at91_matrix { + u32 mcfg[16]; + u32 scfg[16]; + u32 pras[16][2]; + u32 mrcr; /* 0x100 Master Remap Control */ + u32 filler[3]; + u32 tcmr; + u32 filler2; + u32 ddrmpr; + u32 filler3[3]; + u32 ebicsa; + u32 filler4[47]; + u32 wpmr; + u32 wpsr; +}; -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ -#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ -#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ -#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ +#endif /* __ASSEMBLY__ */ -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) -#define AT91_MATRIX_RCB9 (1 << 9) -#define AT91_MATRIX_RCB10 (1 << 10) -#define AT91_MATRIX_RCB11 (1 << 11) +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) +#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0) +#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0) +#define AT91_MATRIX_ULBT_128 (7 << 0) -#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x110) /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) -#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */ -#define AT91_MATRIX_TCM_NO_WS (0x0 << 11) -#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11) +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT 18 -#define AT91_MATRIX_VIDEO (AT91_MATRIX + 0x118) /* Video Mode Configuration Register */ -#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */ -#define AT91C_VDEC_SEL_OFF (0 << 0) -#define AT91C_VDEC_SEL_ON (1 << 0) +#define AT91_MATRIX_M0PR_SHIFT 0 +#define AT91_MATRIX_M1PR_SHIFT 4 +#define AT91_MATRIX_M2PR_SHIFT 8 +#define AT91_MATRIX_M3PR_SHIFT 12 +#define AT91_MATRIX_M4PR_SHIFT 16 +#define AT91_MATRIX_M5PR_SHIFT 20 +#define AT91_MATRIX_M6PR_SHIFT 24 +#define AT91_MATRIX_M7PR_SHIFT 28 -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x128) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4) -#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) -#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) -#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ -#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) -#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) -#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ -#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) -#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) +#define AT91_MATRIX_M8PR_SHIFT 0 /* register B */ +#define AT91_MATRIX_M9PR_SHIFT 4 /* register B */ +#define AT91_MATRIX_M10PR_SHIFT 8 /* register B */ +#define AT91_MATRIX_M11PR_SHIFT 12 /* register B */ -#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ -#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ -#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) -#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) -#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ +#define AT91_MATRIX_RCB0 (1 << 0) +#define AT91_MATRIX_RCB1 (1 << 1) +#define AT91_MATRIX_RCB2 (1 << 2) +#define AT91_MATRIX_RCB3 (1 << 3) +#define AT91_MATRIX_RCB4 (1 << 4) +#define AT91_MATRIX_RCB5 (1 << 5) +#define AT91_MATRIX_RCB6 (1 << 6) +#define AT91_MATRIX_RCB7 (1 << 7) +#define AT91_MATRIX_RCB8 (1 << 8) +#define AT91_MATRIX_RCB9 (1 << 9) +#define AT91_MATRIX_RCB10 (1 << 10) -#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ -#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ -#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) -#define AT91_MATRIX_WPSR_WPV (1 << 0) -#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ +#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) +#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) +#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4) +#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) +#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5) +#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) +#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) +#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) +#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) +#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) +#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) #endif diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h index f537c4b1a9..692d50755a 100644 --- a/arch/arm/include/asm/arch-davinci/hardware.h +++ b/arch/arm/include/asm/arch-davinci/hardware.h @@ -129,6 +129,7 @@ typedef volatile unsigned int * dv_reg_p; #define DAVINCI_TIMER1_BASE 0x01c21000 #define DAVINCI_WDOG_BASE 0x01c21000 #define DAVINCI_PLL_CNTRL0_BASE 0x01c11000 +#define DAVINCI_PLL_CNTRL1_BASE 0x01e1a000 #define DAVINCI_PSC0_BASE 0x01c10000 #define DAVINCI_PSC1_BASE 0x01e27000 #define DAVINCI_SPI0_BASE 0x01c41000 @@ -152,8 +153,16 @@ typedef volatile unsigned int * dv_reg_p; #define DAVINCI_DDR_EMIF_DATA_BASE 0xc0000000 #define DAVINCI_INTC_BASE 0xfffee000 #define DAVINCI_BOOTCFG_BASE 0x01c14000 +#define DAVINCI_L3CBARAM_BASE 0x80000000 #define JTAG_ID_REG (DAVINCI_BOOTCFG_BASE + 0x18) - +#define CHIP_REV_ID_REG (DAVINCI_BOOTCFG_BASE + 0x24) +#define HOST1CFG (DAVINCI_BOOTCFG_BASE + 0x44) +#define PSC0_MDCTL (DAVINCI_PSC0_BASE + 0xa00) + +#define GPIO_BANK0_REG_DIR_ADDR (DAVINCI_GPIO_BASE + 0x10) +#define GPIO_BANK0_REG_OPDATA_ADDR (DAVINCI_GPIO_BASE + 0x14) +#define GPIO_BANK0_REG_SET_ADDR (DAVINCI_GPIO_BASE + 0x18) +#define GPIO_BANK0_REG_CLR_ADDR (DAVINCI_GPIO_BASE + 0x1c) #define GPIO_BANK2_REG_DIR_ADDR (DAVINCI_GPIO_BASE + 0x38) #define GPIO_BANK2_REG_OPDATA_ADDR (DAVINCI_GPIO_BASE + 0x3c) #define GPIO_BANK2_REG_SET_ADDR (DAVINCI_GPIO_BASE + 0x40) @@ -387,7 +396,8 @@ struct davinci_pllc_regs { dv_reg emucnt1; }; -#define davinci_pllc_regs ((struct davinci_pllc_regs *)DAVINCI_PLL_CNTRL0_BASE) +#define davinci_pllc0_regs ((struct davinci_pllc_regs *)DAVINCI_PLL_CNTRL0_BASE) +#define davinci_pllc1_regs ((struct davinci_pllc_regs *)DAVINCI_PLL_CNTRL1_BASE) #define DAVINCI_PLLC_DIV_MASK 0x1f #define ASYNC3 get_async3_src() diff --git a/include/mxc_gpio.h b/arch/arm/include/asm/arch-mx25/gpio.h index f673dcecd6..dc6edc7c85 100644 --- a/include/mxc_gpio.h +++ b/arch/arm/include/asm/arch-mx25/gpio.h @@ -1,6 +1,6 @@ /* - * - * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * Copyright (C) 2011 + * Stefano Babic, DENX Software Engineering, <sbabic@denx.de> * * See file CREDITS for list of people who contributed to this * project. @@ -21,37 +21,25 @@ * MA 02111-1307 USA */ -#ifndef __MXC_GPIO_H -#define __MXC_GPIO_H + +#ifndef __ASM_ARCH_MX25_GPIO_H +#define __ASM_ARCH_MX25_GPIO_H /* Converts a GPIO port number and the internal bit position * to the GPIO number */ #define MXC_GPIO_PORT_TO_NUM(port, bit) (((port - 1) << 5) + (bit & 0x1f)) -enum mxc_gpio_direction { - MXC_GPIO_DIRECTION_IN, - MXC_GPIO_DIRECTION_OUT, +/* GPIO registers */ +struct gpio_regs { + u32 gpio_dr; /* data */ + u32 gpio_dir; /* direction */ + u32 psr; /* pad satus */ + u32 icr1; /* interrupt config 1 */ + u32 icr2; /* interrupt config 2 */ + u32 imr; /* interrupt mask */ + u32 isr; /* interrupt status */ + u32 edge_sel; /* edge select */ }; -#ifdef CONFIG_MXC_GPIO -extern int mxc_gpio_direction(unsigned int gpio, - enum mxc_gpio_direction direction); -extern void mxc_gpio_set(unsigned int gpio, unsigned int value); -extern int mxc_gpio_get(unsigned int gpio); -#else -static inline int mxc_gpio_direction(unsigned int gpio, - enum mxc_gpio_direction direction) -{ - return 1; -} -static inline int mxc_gpio_get(unsigned int gpio) -{ - return 1; -} -static inline void mxc_gpio_set(unsigned int gpio, unsigned int value) -{ -} -#endif - #endif diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h index 2ccb445975..9e30f7c2bc 100644 --- a/arch/arm/include/asm/arch-mx25/imx-regs.h +++ b/arch/arm/include/asm/arch-mx25/imx-regs.h @@ -84,18 +84,6 @@ struct esdramc_regs { u32 cdlyl; /* delay line cycle length debug */ }; -/* GPIO registers */ -struct gpio_regs { - u32 gpio_dr; /* data */ - u32 gpio_dir; /* direction */ - u32 psr; /* pad satus */ - u32 icr1; /* interrupt config 1 */ - u32 icr2; /* interrupt config 2 */ - u32 imr; /* interrupt mask */ - u32 isr; /* interrupt status */ - u32 edge_sel; /* edge select */ -}; - /* General Purpose Timer (GPT) registers */ struct gpt_regs { u32 ctrl; /* control */ diff --git a/arch/arm/include/asm/arch-mx31/clock.h b/arch/arm/include/asm/arch-mx31/clock.h index fb035c4993..b132676460 100644 --- a/arch/arm/include/asm/arch-mx31/clock.h +++ b/arch/arm/include/asm/arch-mx31/clock.h @@ -32,7 +32,7 @@ enum mxc_clock { }; unsigned int mxc_get_clock(enum mxc_clock clk); -extern u32 imx_get_uartclk(); +extern u32 imx_get_uartclk(void); extern void mx31_gpio_mux(unsigned long mode); extern void mx31_set_pad(enum iomux_pins pin, u32 config); diff --git a/board/edb93xx/early_udelay.h b/arch/arm/include/asm/arch-mx31/gpio.h index 185283d98d..95b73bfc34 100644 --- a/board/edb93xx/early_udelay.h +++ b/arch/arm/include/asm/arch-mx31/gpio.h @@ -1,5 +1,6 @@ /* - * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net> + * Copyright (C) 2011 + * Stefano Babic, DENX Software Engineering, <sbabic@denx.de> * * See file CREDITS for list of people who contributed to this * project. @@ -20,15 +21,15 @@ * MA 02111-1307 USA */ -#include <common.h> -/* delay execution before timers are initialized */ -static inline void early_udelay(uint32_t usecs) -{ - /* loop takes 4 cycles at 5.0ns (fastest case, running at 200MHz) */ - register uint32_t loops = usecs * (1000 / 20); +#ifndef __ASM_ARCH_MX31_GPIO_H +#define __ASM_ARCH_MX31_GPIO_H - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} +/* GPIO Registers */ +struct gpio_regs { + u32 gpio_dr; + u32 gpio_dir; + u32 gpio_psr; +}; + +#endif diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h index 3c8d6076d2..2064870f44 100644 --- a/arch/arm/include/asm/arch-mx31/imx-regs.h +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -57,13 +57,6 @@ struct clock_control_regs { u32 pdr2; }; -/* GPIO Registers */ -struct gpio_regs { - u32 gpio_dr; - u32 gpio_dir; - u32 gpio_psr; -}; - struct cspi_regs { u32 rxdata; u32 txdata; diff --git a/board/atmel/at91cap9adk/partition.c b/arch/arm/include/asm/arch-mx35/gpio.h index 7e1d46f530..7bcc3e8688 100644 --- a/board/atmel/at91cap9adk/partition.c +++ b/arch/arm/include/asm/arch-mx35/gpio.h @@ -1,6 +1,9 @@ /* - * (C) Copyright 2008 - * Ulf Samuelsson <ulf@atmel.com> + * Copyright (C) 2011 + * Stefano Babic, DENX Software Engineering, <sbabic@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -16,24 +19,22 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA - * */ -#include <common.h> -#include <config.h> -#include <asm/hardware.h> -#include <dataflash.h> -AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS]; -struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = { - {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ -}; +#ifndef __ASM_ARCH_MX35_GPIO_H +#define __ASM_ARCH_MX35_GPIO_H -/*define the area offsets*/ -dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, - {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, - {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, - {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, - {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, +/* GPIO registers */ +struct gpio_regs { + u32 gpio_dr; /* data */ + u32 gpio_dir; /* direction */ + u32 psr; /* pad satus */ + u32 icr1; /* interrupt config 1 */ + u32 icr2; /* interrupt config 2 */ + u32 imr; /* interrupt mask */ + u32 isr; /* interrupt status */ + u32 edge_sel; /* edge select */ }; + +#endif diff --git a/arch/arm/include/asm/arch-mx5/gpio.h b/arch/arm/include/asm/arch-mx5/gpio.h new file mode 100644 index 0000000000..1dc34e9164 --- /dev/null +++ b/arch/arm/include/asm/arch-mx5/gpio.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2011 + * Stefano Babic, DENX Software Engineering, <sbabic@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#ifndef __ASM_ARCH_MX5_GPIO_H +#define __ASM_ARCH_MX5_GPIO_H + +/* GPIO registers */ +struct gpio_regs { + u32 gpio_dr; + u32 gpio_dir; + u32 gpio_psr; +}; + +#endif diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index e83ca29006..a4e680b8d3 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -235,6 +235,11 @@ /* Assuming 24MHz input clock with doubler ON */ /* MFI PDF */ +#define DP_OP_864 ((8 << 4) + ((1 - 1) << 0)) +#define DP_MFD_864 (180 - 1) /* PL Dither mode */ +#define DP_MFN_864 180 +#define DP_MFN_800_DIT 60 /* PL Dither mode */ + #define DP_OP_850 ((8 << 4) + ((1 - 1) << 0)) #define DP_MFD_850 (48 - 1) #define DP_MFN_850 41 @@ -404,13 +409,6 @@ struct iomuxc { }; #endif -/* GPIO Registers */ -struct gpio_regs { - u32 gpio_dr; - u32 gpio_dir; - u32 gpio_psr; -}; - /* System Reset Controller (SRC) */ struct src { u32 scr; diff --git a/arch/arm/include/asm/arch-omap3/clocks_omap3.h b/arch/arm/include/asm/arch-omap3/clocks_omap3.h index ef600dd9db..db29b7c6df 100644 --- a/arch/arm/include/asm/arch-omap3/clocks_omap3.h +++ b/arch/arm/include/asm/arch-omap3/clocks_omap3.h @@ -39,6 +39,7 @@ #define CORE_L4_DIV 2 /* 83MHz : L4 */ #define CORE_L3_DIV 2 /* 166MHz : L3 {DDR} */ #define GFX_DIV 2 /* 83MHz : CM_CLKSEL_GFX */ +#define GFX_DIV_36X 5 /* 200MHz : CM_CLKSEL_GFX */ #define WKUP_RSM 2 /* 41.5MHz: CM_CLKSEL_WKUP */ /* PER DPLL */ diff --git a/arch/arm/include/asm/arch-omap3/dss.h b/arch/arm/include/asm/arch-omap3/dss.h new file mode 100644 index 0000000000..4c56e5e9e6 --- /dev/null +++ b/arch/arm/include/asm/arch-omap3/dss.h @@ -0,0 +1,174 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * Referred to Linux Kernel DSS driver files for OMAP3 by + * Tomi Valkeinen from drivers/video/omap2/dss/ + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation's version 2 and any + * later version the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef DSS_H +#define DSS_H + +/* + * DSS Base Registers + */ +#define OMAP3_DSS_BASE 0x48050040 +#define OMAP3_DISPC_BASE 0x48050440 +#define OMAP3_VENC_BASE 0x48050C00 + +/* DSS Registers */ +struct dss_regs { + u32 control; /* 0x40 */ + u32 sdi_control; /* 0x44 */ + u32 pll_control; /* 0x48 */ +}; + +/* DISPC Registers */ +struct dispc_regs { + u32 control; /* 0x40 */ + u32 config; /* 0x44 */ + u32 reserve_2; /* 0x48 */ + u32 default_color0; /* 0x4C */ + u32 default_color1; /* 0x50 */ + u32 trans_color0; /* 0x54 */ + u32 trans_color1; /* 0x58 */ + u32 line_status; /* 0x5C */ + u32 line_number; /* 0x60 */ + u32 timing_h; /* 0x64 */ + u32 timing_v; /* 0x68 */ + u32 pol_freq; /* 0x6C */ + u32 divisor; /* 0x70 */ + u32 global_alpha; /* 0x74 */ + u32 size_dig; /* 0x78 */ + u32 size_lcd; /* 0x7C */ +}; + +/* VENC Registers */ +struct venc_regs { + u32 rev_id; /* 0x00 */ + u32 status; /* 0x04 */ + u32 f_control; /* 0x08 */ + u32 reserve_1; /* 0x0C */ + u32 vidout_ctrl; /* 0x10 */ + u32 sync_ctrl; /* 0x14 */ + u32 reserve_2; /* 0x18 */ + u32 llen; /* 0x1C */ + u32 flens; /* 0x20 */ + u32 hfltr_ctrl; /* 0x24 */ + u32 cc_carr_wss_carr; /* 0x28 */ + u32 c_phase; /* 0x2C */ + u32 gain_u; /* 0x30 */ + u32 gain_v; /* 0x34 */ + u32 gain_y; /* 0x38 */ + u32 black_level; /* 0x3C */ + u32 blank_level; /* 0x40 */ + u32 x_color; /* 0x44 */ + u32 m_control; /* 0x48 */ + u32 bstamp_wss_data; /* 0x4C */ + u32 s_carr; /* 0x50 */ + u32 line21; /* 0x54 */ + u32 ln_sel; /* 0x58 */ + u32 l21__wc_ctl; /* 0x5C */ + u32 htrigger_vtrigger; /* 0x60 */ + u32 savid__eavid; /* 0x64 */ + u32 flen__fal; /* 0x68 */ + u32 lal__phase_reset; /* 0x6C */ + u32 hs_int_start_stop_x; /* 0x70 */ + u32 hs_ext_start_stop_x; /* 0x74 */ + u32 vs_int_start_x; /* 0x78 */ + u32 vs_int_stop_x__vs_int_start_y; /* 0x7C */ + u32 vs_int_stop_y__vs_ext_start_x; /* 0x80 */ + u32 vs_ext_stop_x__vs_ext_start_y; /* 0x84 */ + u32 vs_ext_stop_y; /* 0x88 */ + u32 reserve_3; /* 0x8C */ + u32 avid_start_stop_x; /* 0x90 */ + u32 avid_start_stop_y; /* 0x94 */ + u32 reserve_4; /* 0x98 */ + u32 reserve_5; /* 0x9C */ + u32 fid_int_start_x__fid_int_start_y; /* 0xA0 */ + u32 fid_int_offset_y__fid_ext_start_x; /* 0xA4 */ + u32 fid_ext_start_y__fid_ext_offset_y; /* 0xA8 */ + u32 reserve_6; /* 0xAC */ + u32 tvdetgp_int_start_stop_x; /* 0xB0 */ + u32 tvdetgp_int_start_stop_y; /* 0xB4 */ + u32 gen_ctrl; /* 0xB8 */ + u32 reserve_7; /* 0xBC */ + u32 reserve_8; /* 0xC0 */ + u32 output_control; /* 0xC4 */ + u32 dac_b__dac_c; /* 0xC8 */ + u32 height_width; /* 0xCC */ +}; + +/* Few Register Offsets */ +#define FRAME_MODE_SHIFT 1 +#define TFTSTN_SHIFT 3 +#define DATALINES_SHIFT 8 + +/* Enabling Display controller */ +#define LCD_ENABLE 1 +#define DIG_ENABLE (1 << 1) +#define GO_LCD (1 << 5) +#define GO_DIG (1 << 6) +#define GP_OUT0 (1 << 15) +#define GP_OUT1 (1 << 16) + +#define DISPC_ENABLE (LCD_ENABLE | \ + DIG_ENABLE | \ + GO_LCD | \ + GO_DIG | \ + GP_OUT0| \ + GP_OUT1) + +/* Configure VENC DSS Params */ +#define VENC_CLK_ENABLE (1 << 3) +#define DAC_DEMEN (1 << 4) +#define DAC_POWERDN (1 << 5) +#define VENC_OUT_SEL (1 << 6) +#define DIG_LPP_SHIFT 16 +#define VENC_DSS_CONFIG (VENC_CLK_ENABLE | \ + DAC_DEMEN | \ + DAC_POWERDN | \ + VENC_OUT_SEL) +/* + * Panel Configuration + */ +struct panel_config { + u32 timing_h; + u32 timing_v; + u32 pol_freq; + u32 divisor; + u32 lcd_size; + u32 panel_type; + u32 data_lines; + u32 load_mode; + u32 panel_color; +}; + +/* + * Generic DSS Functions + */ +void omap3_dss_venc_config(const struct venc_regs *venc_cfg, + u32 height, u32 width); +void omap3_dss_panel_config(const struct panel_config *panel_cfg); +void omap3_dss_enable(void); + +#endif /* DSS_H */ diff --git a/arch/arm/include/asm/arch-omap3/gpio.h b/arch/arm/include/asm/arch-omap3/gpio.h new file mode 100644 index 0000000000..8bba3b030b --- /dev/null +++ b/arch/arm/include/asm/arch-omap3/gpio.h @@ -0,0 +1,50 @@ +/* + * Copyright (c) 2009 Wind River Systems, Inc. + * Tom Rix <Tom.Rix@windriver.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * This work is derived from the linux 2.6.27 kernel source + * To fetch, use the kernel repository + * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + * Use the v2.6.27 tag. + * + * Below is the original's header including its copyright + * + * linux/arch/arm/plat-omap/gpio.c + * + * Support functions for OMAP GPIO + * + * Copyright (C) 2003-2005 Nokia Corporation + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _GPIO_OMAP3_H +#define _GPIO_OMAP3_H + +#include <asm/omap_gpio.h> + +#define OMAP34XX_GPIO1_BASE 0x48310000 +#define OMAP34XX_GPIO2_BASE 0x49050000 +#define OMAP34XX_GPIO3_BASE 0x49052000 +#define OMAP34XX_GPIO4_BASE 0x49054000 +#define OMAP34XX_GPIO5_BASE 0x49056000 +#define OMAP34XX_GPIO6_BASE 0x49058000 + +#endif /* _GPIO_OMAP3_H */ diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h index d9d49da566..230eaadaa8 100644 --- a/arch/arm/include/asm/arch-omap3/omap3.h +++ b/arch/arm/include/asm/arch-omap3/omap3.h @@ -100,14 +100,6 @@ struct s32ktimer { #endif /* __ASSEMBLY__ */ -/* OMAP3 GPIO registers */ -#define OMAP34XX_GPIO1_BASE 0x48310000 -#define OMAP34XX_GPIO2_BASE 0x49050000 -#define OMAP34XX_GPIO3_BASE 0x49052000 -#define OMAP34XX_GPIO4_BASE 0x49054000 -#define OMAP34XX_GPIO5_BASE 0x49056000 -#define OMAP34XX_GPIO6_BASE 0x49058000 - #ifndef __ASSEMBLY__ struct gpio { unsigned char res1[0x34]; diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h index 374e0642ec..45c947d648 100644 --- a/arch/arm/include/asm/arch-omap4/clocks.h +++ b/arch/arm/include/asm/arch-omap4/clocks.h @@ -679,12 +679,12 @@ struct dpll_regs { struct dpll_params { u32 m; u32 n; - u8 m2; - u8 m3; - u8 m4; - u8 m5; - u8 m6; - u8 m7; + s8 m2; + s8 m3; + s8 m4; + s8 m5; + s8 m6; + s8 m7; }; #endif /* _CLOCKS_OMAP4_H_ */ diff --git a/arch/arm/include/asm/arch-omap4/gpio.h b/arch/arm/include/asm/arch-omap4/gpio.h new file mode 100644 index 0000000000..26f19d19a5 --- /dev/null +++ b/arch/arm/include/asm/arch-omap4/gpio.h @@ -0,0 +1,50 @@ +/* + * Copyright (c) 2009 Wind River Systems, Inc. + * Tom Rix <Tom.Rix@windriver.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * This work is derived from the linux 2.6.27 kernel source + * To fetch, use the kernel repository + * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + * Use the v2.6.27 tag. + * + * Below is the original's header including its copyright + * + * linux/arch/arm/plat-omap/gpio.c + * + * Support functions for OMAP GPIO + * + * Copyright (C) 2003-2005 Nokia Corporation + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _GPIO_OMAP4_H +#define _GPIO_OMAP4_H + +#include <asm/omap_gpio.h> + +#define OMAP44XX_GPIO1_BASE 0x4A310000 +#define OMAP44XX_GPIO2_BASE 0x48055000 +#define OMAP44XX_GPIO3_BASE 0x48057000 +#define OMAP44XX_GPIO4_BASE 0x48059000 +#define OMAP44XX_GPIO5_BASE 0x4805B000 +#define OMAP44XX_GPIO6_BASE 0x4805D000 + +#endif /* _GPIO_OMAP4_H */ diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap4.h index 9aad0e6189..7ff46d771c 100644 --- a/arch/arm/include/asm/arch-omap4/omap4.h +++ b/arch/arm/include/asm/arch-omap4/omap4.h @@ -153,12 +153,4 @@ struct s32ktimer { #define DEV_DATA_PTR_OFFSET 0x18 #define BOOT_MODE_OFFSET 0x8 -/* GPIO */ -#define OMAP44XX_GPIO1_BASE 0x4A310000 -#define OMAP44XX_GPIO2_BASE 0x48055000 -#define OMAP44XX_GPIO3_BASE 0x48057000 -#define OMAP44XX_GPIO4_BASE 0x48059000 -#define OMAP44XX_GPIO5_BASE 0x4805B000 -#define OMAP44XX_GPIO6_BASE 0x4805D000 - #endif diff --git a/arch/arm/include/asm/arch-s5pc1xx/gpio.h b/arch/arm/include/asm/arch-s5pc1xx/gpio.h index 485b9bf8e0..76b901b397 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/gpio.h +++ b/arch/arm/include/asm/arch-s5pc1xx/gpio.h @@ -126,14 +126,27 @@ struct s5pc110_gpio { }; /* functions */ -void gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg); -void gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en); -void gpio_direction_input(struct s5p_gpio_bank *bank, int gpio); -void gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en); -unsigned int gpio_get_value(struct s5p_gpio_bank *bank, int gpio); -void gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode); -void gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode); -void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode); +void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg); +void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en); +void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio); +void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en); +unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio); +void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode); +void s5p_gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode); +void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode); + +/* GPIO pins per bank */ +#define GPIO_PER_BANK 8 + +static inline unsigned int s5p_gpio_base(int nr) +{ + return S5PC110_GPIO_BASE; +} + +#define s5pc110_gpio_get_nr(bank, pin) \ + ((((((unsigned int)&(((struct s5pc110_gpio *)S5PC110_GPIO_BASE)->bank))\ + - S5PC110_GPIO_BASE) / sizeof(struct s5p_gpio_bank)) \ + * GPIO_PER_BANK) + pin) #endif /* Pin configurations */ diff --git a/arch/arm/include/asm/arch-s5pc2xx/gpio.h b/arch/arm/include/asm/arch-s5pc2xx/gpio.h index 38303e4f0c..8be620cae6 100644 --- a/arch/arm/include/asm/arch-s5pc2xx/gpio.h +++ b/arch/arm/include/asm/arch-s5pc2xx/gpio.h @@ -80,14 +80,43 @@ struct s5pc210_gpio_part3 { }; /* functions */ -void gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg); -void gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en); -void gpio_direction_input(struct s5p_gpio_bank *bank, int gpio); -void gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en); -unsigned int gpio_get_value(struct s5p_gpio_bank *bank, int gpio); -void gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode); -void gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode); -void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode); +void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg); +void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en); +void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio); +void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en); +unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio); +void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode); +void s5p_gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode); +void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode); + +/* GPIO pins per bank */ +#define GPIO_PER_BANK 8 + +#define s5pc210_gpio_part1_get_nr(bank, pin) \ + ((((((unsigned int) &(((struct s5pc210_gpio_part1 *) \ + S5PC210_GPIO_PART1_BASE)->bank)) \ + - S5PC210_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \ + * GPIO_PER_BANK) + pin) + +#define GPIO_PART1_MAX ((sizeof(struct s5pc210_gpio_part1) \ + / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) + +#define s5pc210_gpio_part2_get_nr(bank, pin) \ + (((((((unsigned int) &(((struct s5pc210_gpio_part2 *) \ + S5PC210_GPIO_PART2_BASE)->bank)) \ + - S5PC210_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \ + * GPIO_PER_BANK) + pin) + GPIO_PART1_MAX) + +static inline unsigned int s5p_gpio_base(int nr) +{ + if (nr < GPIO_PART1_MAX) + return S5PC210_GPIO_PART1_BASE; + else + return S5PC210_GPIO_PART2_BASE; + + return 0; +} + #endif /* Pin configurations */ diff --git a/arch/arm/include/asm/arch-tegra2/clk_rst.h b/arch/arm/include/asm/arch-tegra2/clk_rst.h index 36e27b5f3f..bd9d9ade90 100644 --- a/arch/arm/include/asm/arch-tegra2/clk_rst.h +++ b/arch/arm/include/asm/arch-tegra2/clk_rst.h @@ -24,15 +24,34 @@ #ifndef _CLK_RST_H_ #define _CLK_RST_H_ +/* PLL registers - there are several PLLs in the clock controller */ +struct clk_pll { + uint pll_base; /* the control register */ + uint pll_out; /* output control */ + uint reserved; + uint pll_misc; /* other misc things */ +}; + +/* PLL registers - there are several PLLs in the clock controller */ +struct clk_pll_simple { + uint pll_base; /* the control register */ + uint pll_misc; /* other misc things */ +}; + +/* + * Most PLLs use the clk_pll structure, but some have a simpler two-member + * structure for which we use clk_pll_simple. The reason for this non- + * othogonal setup is not stated. + */ +#define TEGRA_CLK_PLLS 6 +#define TEGRA_CLK_SIMPLE_PLLS 3 /* Number of simple PLLs */ +#define TEGRA_CLK_REGS 3 /* Number of clock enable registers */ + /* Clock/Reset Controller (CLK_RST_CONTROLLER_) regs */ struct clk_rst_ctlr { - uint crc_rst_src; /* _RST_SOURCE_0, 0x00 */ - uint crc_rst_dev_l; /* _RST_DEVICES_L_0, 0x04 */ - uint crc_rst_dev_h; /* _RST_DEVICES_H_0, 0x08 */ - uint crc_rst_dev_u; /* _RST_DEVICES_U_0, 0x0C */ - uint crc_clk_out_enb_l; /* _CLK_OUT_ENB_L_0, 0x10 */ - uint crc_clk_out_enb_h; /* _CLK_OUT_ENB_H_0, 0x14 */ - uint crc_clk_out_enb_u; /* _CLK_OUT_ENB_U_0, 0x18 */ + uint crc_rst_src; /* _RST_SOURCE_0,0x00 */ + uint crc_rst_dev[TEGRA_CLK_REGS]; /* _RST_DEVICES_L/H/U_0 */ + uint crc_clk_out_enb[TEGRA_CLK_REGS]; /* _CLK_OUT_ENB_L/H/U_0 */ uint crc_reserved0; /* reserved_0, 0x1C */ uint crc_cclk_brst_pol; /* _CCLK_BURST_POLICY_0,0x20 */ uint crc_super_cclk_div; /* _SUPER_CCLK_DIVIDER_0,0x24 */ @@ -52,44 +71,11 @@ struct clk_rst_ctlr { uint crc_osc_freq_det_stat; /* _OSC_FREQ_DET_STATUS_0,0x5C */ uint crc_reserved2[8]; /* reserved_2[8], 0x60-7C */ - uint crc_pllc_base; /* _PLLC_BASE_0, 0x80 */ - uint crc_pllc_out; /* _PLLC_OUT_0, 0x84 */ - uint crc_reserved3; /* reserved_3, 0x88 */ - uint crc_pllc_misc; /* _PLLC_MISC_0, 0x8C */ - - uint crc_pllm_base; /* _PLLM_BASE_0, 0x90 */ - uint crc_pllm_out; /* _PLLM_OUT_0, 0x94 */ - uint crc_reserved4; /* reserved_4, 0x98 */ - uint crc_pllm_misc; /* _PLLM_MISC_0, 0x9C */ + struct clk_pll crc_pll[TEGRA_CLK_PLLS]; /* PLLs from 0x80 to 0xdc */ - uint crc_pllp_base; /* _PLLP_BASE_0, 0xA0 */ - uint crc_pllp_outa; /* _PLLP_OUTA_0, 0xA4 */ - uint crc_pllp_outb; /* _PLLP_OUTB_0, 0xA8 */ - uint crc_pllp_misc; /* _PLLP_MISC_0, 0xAC */ + /* PLLs from 0xe0 to 0xf4 */ + struct clk_pll_simple crc_pll_simple[TEGRA_CLK_SIMPLE_PLLS]; - uint crc_plla_base; /* _PLLA_BASE_0, 0xB0 */ - uint crc_plla_out; /* _PLLA_OUT_0, 0xB4 */ - uint crc_reserved5; /* reserved_5, 0xB8 */ - uint crc_plla_misc; /* _PLLA_MISC_0, 0xBC */ - - uint crc_pllu_base; /* _PLLU_BASE_0, 0xC0 */ - uint crc_reserved6; /* _reserved_6, 0xC4 */ - uint crc_reserved7; /* _reserved_7, 0xC8 */ - uint crc_pllu_misc; /* _PLLU_MISC_0, 0xCC */ - - uint crc_plld_base; /* _PLLD_BASE_0, 0xD0 */ - uint crc_reserved8; /* _reserved_8, 0xD4 */ - uint crc_reserved9; /* _reserved_9, 0xD8 */ - uint crc_plld_misc; /* _PLLD_MISC_0, 0xDC */ - - uint crc_pllx_base; /* _PLLX_BASE_0, 0xE0 */ - uint crc_pllx_misc; /* _PLLX_MISC_0, 0xE4 */ - - uint crc_plle_base; /* _PLLE_BASE_0, 0xE8 */ - uint crc_plle_misc; /* _PLLE_MISC_0, 0xEC */ - - uint crc_plls_base; /* _PLLS_BASE_0, 0xF0 */ - uint crc_plls_misc; /* _PLLS_MISC_0, 0xF4 */ uint crc_reserved10; /* _reserved_10, 0xF8 */ uint crc_reserved11; /* _reserved_11, 0xFC */ @@ -154,46 +140,37 @@ struct clk_rst_ctlr { uint crc_cpu_cmplx_clr; /* _CPU_CMPLX_CLR_0, 0x344 */ }; -#define PLL_BYPASS (1 << 31) -#define PLL_ENABLE (1 << 30) -#define PLL_BASE_OVRRIDE (1 << 28) -#define PLL_DIVP (1 << 20) /* post divider, b22:20 */ -#define PLL_DIVM 0x0C /* input divider, b4:0 */ +/* CLK_RST_CONTROLLER_CLK_CPU_CMPLX_0 */ +#define CPU1_CLK_STP_SHIFT 9 + +#define CPU0_CLK_STP_SHIFT 8 +#define CPU0_CLK_STP_MASK (1U << CPU0_CLK_STP_SHIFT) + +/* CLK_RST_CONTROLLER_PLLx_BASE_0 */ +#define PLL_BYPASS_SHIFT 31 +#define PLL_BYPASS_MASK (1U << PLL_BYPASS_SHIFT) -#define SWR_UARTD_RST (1 << 1) -#define CLK_ENB_UARTD (1 << 1) -#define SWR_UARTA_RST (1 << 6) -#define CLK_ENB_UARTA (1 << 6) +#define PLL_ENABLE_SHIFT 30 +#define PLL_ENABLE_MASK (1U << PLL_ENABLE_SHIFT) -#define SWR_CPU_RST (1 << 0) -#define CLK_ENB_CPU (1 << 0) -#define SWR_CSITE_RST (1 << 9) -#define CLK_ENB_CSITE (1 << 9) +#define PLL_BASE_OVRRIDE_MASK (1U << 28) -#define SET_CPURESET0 (1 << 0) -#define SET_DERESET0 (1 << 4) -#define SET_DBGRESET0 (1 << 12) +#define PLL_DIVP_SHIFT 20 -#define SET_CPURESET1 (1 << 1) -#define SET_DERESET1 (1 << 5) -#define SET_DBGRESET1 (1 << 13) +#define PLL_DIVN_SHIFT 8 -#define CLR_CPURESET0 (1 << 0) -#define CLR_DERESET0 (1 << 4) -#define CLR_DBGRESET0 (1 << 12) +#define PLL_DIVM_SHIFT 0 -#define CLR_CPURESET1 (1 << 1) -#define CLR_DERESET1 (1 << 5) -#define CLR_DBGRESET1 (1 << 13) +/* CLK_RST_CONTROLLER_PLLx_MISC_0 */ +#define PLL_CPCON_SHIFT 8 +#define PLL_CPCON_MASK (15U << PLL_CPCON_SHIFT) -#define CPU0_CLK_STP (1 << 8) -#define CPU1_CLK_STP (1 << 9) +#define PLL_LFCON_SHIFT 4 -#define CPCON (1 << 8) +#define PLLU_VCO_FREQ_SHIFT 20 -#define SWR_SDMMC4_RST (1 << 15) -#define CLK_ENB_SDMMC4 (1 << 15) -#define SWR_SDMMC3_RST (1 << 5) -#define CLK_ENB_SDMMC3 (1 << 5) +/* CLK_RST_CONTROLLER_OSC_CTRL_0 */ +#define OSC_FREQ_SHIFT 30 +#define OSC_FREQ_MASK (3U << OSC_FREQ_SHIFT) #endif /* CLK_RST_H */ diff --git a/arch/arm/include/asm/arch-tegra2/clock.h b/arch/arm/include/asm/arch-tegra2/clock.h new file mode 100644 index 0000000000..d01aec825d --- /dev/null +++ b/arch/arm/include/asm/arch-tegra2/clock.h @@ -0,0 +1,263 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* Tegra2 clock control functions */ + +#ifndef _CLOCK_H + + +/* Set of oscillator frequencies supported in the internal API. */ +enum clock_osc_freq { + /* All in MHz, so 13_0 is 13.0MHz */ + CLOCK_OSC_FREQ_13_0, + CLOCK_OSC_FREQ_19_2, + CLOCK_OSC_FREQ_12_0, + CLOCK_OSC_FREQ_26_0, + + CLOCK_OSC_FREQ_COUNT, +}; + +/* The PLLs supported by the hardware */ +enum clock_pll_id { + CLOCK_PLL_ID_FIRST, + CLOCK_PLL_ID_CGENERAL = CLOCK_PLL_ID_FIRST, + CLOCK_PLL_ID_MEMORY, + CLOCK_PLL_ID_PERIPH, + CLOCK_PLL_ID_AUDIO, + CLOCK_PLL_ID_USB, + CLOCK_PLL_ID_DISPLAY, + + /* now the simple ones */ + CLOCK_PLL_ID_FIRST_SIMPLE, + CLOCK_PLL_ID_XCPU = CLOCK_PLL_ID_FIRST_SIMPLE, + CLOCK_PLL_ID_EPCI, + CLOCK_PLL_ID_SFROM32KHZ, + + CLOCK_PLL_ID_COUNT, +}; + +/* The clocks supported by the hardware */ +enum periph_id { + PERIPH_ID_FIRST, + + /* Low word: 31:0 */ + PERIPH_ID_CPU = PERIPH_ID_FIRST, + PERIPH_ID_RESERVED1, + PERIPH_ID_RESERVED2, + PERIPH_ID_AC97, + PERIPH_ID_RTC, + PERIPH_ID_TMR, + PERIPH_ID_UART1, + PERIPH_ID_UART2, + + /* 8 */ + PERIPH_ID_GPIO, + PERIPH_ID_SDMMC2, + PERIPH_ID_SPDIF, + PERIPH_ID_I2S1, + PERIPH_ID_I2C1, + PERIPH_ID_NDFLASH, + PERIPH_ID_SDMMC1, + PERIPH_ID_SDMMC4, + + /* 16 */ + PERIPH_ID_TWC, + PERIPH_ID_PWC, + PERIPH_ID_I2S2, + PERIPH_ID_EPP, + PERIPH_ID_VI, + PERIPH_ID_2D, + PERIPH_ID_USBD, + PERIPH_ID_ISP, + + /* 24 */ + PERIPH_ID_3D, + PERIPH_ID_IDE, + PERIPH_ID_DISP2, + PERIPH_ID_DISP1, + PERIPH_ID_HOST1X, + PERIPH_ID_VCP, + PERIPH_ID_RESERVED30, + PERIPH_ID_CACHE2, + + /* Middle word: 63:32 */ + PERIPH_ID_MEM, + PERIPH_ID_AHBDMA, + PERIPH_ID_APBDMA, + PERIPH_ID_RESERVED35, + PERIPH_ID_KBC, + PERIPH_ID_STAT_MON, + PERIPH_ID_PMC, + PERIPH_ID_FUSE, + + /* 40 */ + PERIPH_ID_KFUSE, + PERIPH_ID_SBC1, + PERIPH_ID_SNOR, + PERIPH_ID_SPI1, + PERIPH_ID_SBC2, + PERIPH_ID_XIO, + PERIPH_ID_SBC3, + PERIPH_ID_DVC_I2C, + + /* 48 */ + PERIPH_ID_DSI, + PERIPH_ID_TVO, + PERIPH_ID_MIPI, + PERIPH_ID_HDMI, + PERIPH_ID_CSI, + PERIPH_ID_TVDAC, + PERIPH_ID_I2C2, + PERIPH_ID_UART3, + + /* 56 */ + PERIPH_ID_RESERVED56, + PERIPH_ID_EMC, + PERIPH_ID_USB2, + PERIPH_ID_USB3, + PERIPH_ID_MPE, + PERIPH_ID_VDE, + PERIPH_ID_BSEA, + PERIPH_ID_BSEV, + + /* Upper word 95:64 */ + PERIPH_ID_SPEEDO, + PERIPH_ID_UART4, + PERIPH_ID_UART5, + PERIPH_ID_I2C3, + PERIPH_ID_SBC4, + PERIPH_ID_SDMMC3, + PERIPH_ID_PCIE, + PERIPH_ID_OWR, + + /* 72 */ + PERIPH_ID_AFI, + PERIPH_ID_CORESIGHT, + PERIPH_ID_RESERVED74, + PERIPH_ID_AVPUCQ, + PERIPH_ID_RESERVED76, + PERIPH_ID_RESERVED77, + PERIPH_ID_RESERVED78, + PERIPH_ID_RESERVED79, + + /* 80 */ + PERIPH_ID_RESERVED80, + PERIPH_ID_RESERVED81, + PERIPH_ID_RESERVED82, + PERIPH_ID_RESERVED83, + PERIPH_ID_IRAMA, + PERIPH_ID_IRAMB, + PERIPH_ID_IRAMC, + PERIPH_ID_IRAMD, + + /* 88 */ + PERIPH_ID_CRAM2, + + PERIPH_ID_COUNT, +}; + +/* Converts a clock number to a clock register: 0=L, 1=H, 2=U */ +#define PERIPH_REG(id) ((id) >> 5) + +/* Mask value for a clock (within PERIPH_REG(id)) */ +#define PERIPH_MASK(id) (1 << ((id) & 0x1f)) + +/* return 1 if a PLL ID is in range */ +#define clock_pll_id_isvalid(id) ((id) >= CLOCK_PLL_ID_FIRST && \ + (id) < CLOCK_PLL_ID_COUNT) + +/* return 1 if a peripheral ID is in range */ +#define clock_periph_id_isvalid(id) ((id) >= PERIPH_ID_FIRST && \ + (id) < PERIPH_ID_COUNT) + +/* PLL stabilization delay in usec */ +#define CLOCK_PLL_STABLE_DELAY_US 300 + +/* return the current oscillator clock frequency */ +enum clock_osc_freq clock_get_osc_freq(void); + +/* + * Start PLL using the provided configuration parameters. + * + * @param id clock id + * @param divm input divider + * @param divn feedback divider + * @param divp post divider 2^n + * @param cpcon charge pump setup control + * @param lfcon loop filter setup control + * + * @returns monotonic time in us that the PLL will be stable + */ +unsigned long clock_start_pll(enum clock_pll_id id, u32 divm, u32 divn, + u32 divp, u32 cpcon, u32 lfcon); + +/* + * Enable a clock + * + * @param id clock id + */ +void clock_enable(enum periph_id clkid); + +/* + * Set whether a clock is enabled or disabled. + * + * @param id clock id + * @param enable 1 to enable, 0 to disable + */ +void clock_set_enable(enum periph_id clkid, int enable); + +/* + * Reset a peripheral. This puts it in reset, waits for a delay, then takes + * it out of reset and waits for th delay again. + * + * @param periph_id peripheral to reset + * @param us_delay time to delay in microseconds + */ +void reset_periph(enum periph_id periph_id, int us_delay); + +/* + * Put a peripheral into or out of reset. + * + * @param periph_id peripheral to reset + * @param enable 1 to put into reset, 0 to take out of reset + */ +void reset_set_enable(enum periph_id periph_id, int enable); + + +/* CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET/CLR_0 */ +enum crc_reset_id { + /* Things we can hold in reset for each CPU */ + crc_rst_cpu = 1, + crc_rst_de = 1 << 2, /* What is de? */ + crc_rst_watchdog = 1 << 3, + crc_rst_debug = 1 << 4, +}; + +/* + * Put parts of the CPU complex into or out of reset.\ + * + * @param cpu cpu number (0 or 1 on Tegra2) + * @param which which parts of the complex to affect (OR of crc_reset_id) + * @param reset 1 to assert reset, 0 to de-assert + */ +void reset_cmplx_set_enable(int cpu, int which, int reset); + +#endif diff --git a/arch/arm/include/asm/arch-tegra2/pinmux.h b/arch/arm/include/asm/arch-tegra2/pinmux.h index cce936ddc8..b8a4753c81 100644 --- a/arch/arm/include/asm/arch-tegra2/pinmux.h +++ b/arch/arm/include/asm/arch-tegra2/pinmux.h @@ -24,6 +24,142 @@ #ifndef _PINMUX_H_ #define _PINMUX_H_ +/* Pins which we can set to tristate or normal */ +enum pmux_pin { + /* APB_MISC_PP_TRISTATE_REG_A_0 */ + PIN_ATA, + PIN_ATB, + PIN_ATC, + PIN_ATD, + PIN_CDEV1, + PIN_CDEV2, + PIN_CSUS, + PIN_DAP1, + + PIN_DAP2, + PIN_DAP3, + PIN_DAP4, + PIN_DTA, + PIN_DTB, + PIN_DTC, + PIN_DTD, + PIN_DTE, + + PIN_GPU, + PIN_GPV, + PIN_I2CP, + PIN_IRTX, + PIN_IRRX, + PIN_KBCB, + PIN_KBCA, + PIN_PMC, + + PIN_PTA, + PIN_RM, + PIN_KBCE, + PIN_KBCF, + PIN_GMA, + PIN_GMC, + PIN_SDMMC1, + PIN_OWC, + + /* 32: APB_MISC_PP_TRISTATE_REG_B_0 */ + PIN_GME, + PIN_SDC, + PIN_SDD, + PIN_RESERVED0, + PIN_SLXA, + PIN_SLXC, + PIN_SLXD, + PIN_SLXK, + + PIN_SPDI, + PIN_SPDO, + PIN_SPIA, + PIN_SPIB, + PIN_SPIC, + PIN_SPID, + PIN_SPIE, + PIN_SPIF, + + PIN_SPIG, + PIN_SPIH, + PIN_UAA, + PIN_UAB, + PIN_UAC, + PIN_UAD, + PIN_UCA, + PIN_UCB, + + PIN_RESERVED1, + PIN_ATE, + PIN_KBCC, + PIN_RESERVED2, + PIN_RESERVED3, + PIN_GMB, + PIN_GMD, + PIN_DDC, + + /* 64: APB_MISC_PP_TRISTATE_REG_C_0 */ + PIN_LD0, + PIN_LD1, + PIN_LD2, + PIN_LD3, + PIN_LD4, + PIN_LD5, + PIN_LD6, + PIN_LD7, + + PIN_LD8, + PIN_LD9, + PIN_LD10, + PIN_LD11, + PIN_LD12, + PIN_LD13, + PIN_LD14, + PIN_LD15, + + PIN_LD16, + PIN_LD17, + PIN_LHP0, + PIN_LHP1, + PIN_LHP2, + PIN_LVP0, + PIN_LVP1, + PIN_HDINT, + + PIN_LM0, + PIN_LM1, + PIN_LVS, + PIN_LSC0, + PIN_LSC1, + PIN_LSCK, + PIN_LDC, + PIN_LCSN, + + /* 96: APB_MISC_PP_TRISTATE_REG_D_0 */ + PIN_LSPI, + PIN_LSDA, + PIN_LSDI, + PIN_LPW0, + PIN_LPW1, + PIN_LPW2, + PIN_LDI, + PIN_LHS, + + PIN_LPP, + PIN_RESERVED4, + PIN_KBCD, + PIN_GPU7, + PIN_DTF, + PIN_UDA, + PIN_CRTP, + PIN_SDB, +}; + + +#define TEGRA_TRISTATE_REGS 4 + /* APB MISC Pin Mux and Tristate (APB_MISC_PP_) registers */ struct pmux_tri_ctlr { uint pmt_reserved0; /* ABP_MISC_PP_ reserved offset 00 */ @@ -31,10 +167,7 @@ struct pmux_tri_ctlr { uint pmt_strap_opt_a; /* _STRAPPING_OPT_A_0, offset 08 */ uint pmt_reserved2; /* ABP_MISC_PP_ reserved offset 0C */ uint pmt_reserved3; /* ABP_MISC_PP_ reserved offset 10 */ - uint pmt_tri_a; /* _TRI_STATE_REG_A_0, offset 14 */ - uint pmt_tri_b; /* _TRI_STATE_REG_B_0, offset 18 */ - uint pmt_tri_c; /* _TRI_STATE_REG_C_0, offset 1C */ - uint pmt_tri_d; /* _TRI_STATE_REG_D_0, offset 20 */ + uint pmt_tri[TEGRA_TRISTATE_REGS]; /* _TRI_STATE_REG_A/B/C/D_0 14-20 */ uint pmt_cfg_ctl; /* _CONFIG_CTL_0, offset 24 */ uint pmt_reserved[22]; /* ABP_MISC_PP_ reserved offs 28-7C */ @@ -48,14 +181,16 @@ struct pmux_tri_ctlr { uint pmt_ctl_g; /* _PIN_MUX_CTL_G_0, offset 98 */ }; -#define Z_GMC (1 << 29) -#define Z_IRRX (1 << 20) -#define Z_IRTX (1 << 19) -#define Z_GMA (1 << 28) -#define Z_GME (1 << 0) -#define Z_ATB (1 << 1) -#define Z_SDB (1 << 15) -#define Z_SDC (1 << 1) -#define Z_SDD (1 << 2) +/* Converts a pin number to a tristate register: 0=A, 1=B, 2=C, 3=D */ +#define TRISTATE_REG(id) ((id) >> 5) + +/* Mask value for a tristate (within TRISTATE_REG(id)) */ +#define TRISTATE_MASK(id) (1 << ((id) & 0x1f)) + +/* Set a pin to tristate */ +void pinmux_tristate_enable(enum pmux_pin pin); + +/* Set a pin to normal (non tristate) */ +void pinmux_tristate_disable(enum pmux_pin pin); #endif /* PINMUX_H */ diff --git a/board/edb93xx/flash_cfg.c b/arch/arm/include/asm/arch-tegra2/timer.h index a4c20486c0..adefa2c6c1 100644 --- a/board/edb93xx/flash_cfg.c +++ b/arch/arm/include/asm/arch-tegra2/timer.h @@ -1,8 +1,5 @@ /* - * Flash setup for Cirrus edb93xx boards - * - * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net> - * + * Copyright (c) 2011 The Chromium OS Authors. * See file CREDITS for list of people who contributed to this * project. * @@ -22,17 +19,12 @@ * MA 02111-1307 USA */ -#include <common.h> -#include <asm/arch/ep93xx.h> -#include <asm/io.h> +/* Tegra2 timer functions */ -#define SMC_BCR6_VALUE (2 << SMC_BCR_IDCY_SHIFT | 5 << SMC_BCR_WST1_SHIFT | \ - SMC_BCR_BLE | 2 << SMC_BCR_WST2_SHIFT | \ - 1 << SMC_BCR_MW_SHIFT) +#ifndef _TEGRA2_TIMER_H +#define _TEGRA2_TIMER_H -void flash_cfg(void) -{ - struct smc_regs *smc = (struct smc_regs *)SMC_BASE; +/* returns the current monotonic timer value in microseconds */ +unsigned long timer_get_us(void); - writel(SMC_BCR6_VALUE, &smc->bcr6); -} +#endif diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 14a56f6f0a..a7fb251aa7 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -275,10 +275,6 @@ void board_init_f(ulong bootflag) gd->mon_len = _bss_end_ofs; -#ifdef CONFIG_MACH_TYPE - gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */ -#endif - for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { if ((*init_fnc_ptr)() != 0) { hang (); @@ -376,6 +372,11 @@ void board_init_f(ulong bootflag) gd->bd = bd; debug("Reserving %zu Bytes for Board Info at: %08lx\n", sizeof (bd_t), addr_sp); + +#ifdef CONFIG_MACH_TYPE + gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */ +#endif + addr_sp -= sizeof (gd_t); id = (gd_t *) addr_sp; debug("Reserving %zu Bytes for Global Data at: %08lx\n", @@ -451,11 +452,9 @@ void board_init_r(gd_t *id, ulong dest_addr) gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ monitor_flash_len = _end_ofs; - /* - * Enable D$: - * I$, if needed, must be already enabled in start.S - */ - dcache_enable(); + + /* Enable caches */ + enable_caches(); debug("monitor flash len: %08lX\n", monitor_flash_len); board_init(); /* Setup chipselects */ @@ -626,7 +625,7 @@ void board_init_r(gd_t *id, ulong dest_addr) pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024; #endif #endif - sprintf((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram); + sprintf((char *)memsz, "%ldk", (gd->ram_size / 1024) - pram); setenv("mem", (char *)memsz); } #endif diff --git a/arch/arm/lib/cache-pl310.c b/arch/arm/lib/cache-pl310.c index 36c629ce51..21d13f787a 100644 --- a/arch/arm/lib/cache-pl310.c +++ b/arch/arm/lib/cache-pl310.c @@ -26,6 +26,7 @@ #include <asm/armv7.h> #include <asm/pl310.h> #include <config.h> +#include <common.h> struct pl310_regs *const pl310 = (struct pl310_regs *)CONFIG_SYS_PL310_BASE; @@ -89,21 +90,23 @@ void v7_outer_cache_inval_range(u32 start, u32 stop) u32 pa, line_size = 32; /* - * If start address is not aligned to cache-line flush the first - * line to prevent affecting somebody else's buffer + * If start address is not aligned to cache-line do not + * invalidate the first cache-line */ if (start & (line_size - 1)) { - v7_outer_cache_flush_range(start, start + 1); + printf("ERROR: %s - start address is not aligned - 0x%08x\n", + __func__, start); /* move to next cache line */ start = (start + line_size - 1) & ~(line_size - 1); } /* - * If stop address is not aligned to cache-line flush the last - * line to prevent affecting somebody else's buffer + * If stop address is not aligned to cache-line do not + * invalidate the last cache-line */ if (stop & (line_size - 1)) { - v7_outer_cache_flush_range(stop, stop + 1); + printf("ERROR: %s - stop address is not aligned - 0x%08x\n", + __func__, stop); /* align to the beginning of this cache line */ stop &= ~(line_size - 1); } diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c index 92b61a2653..b545fb79bc 100644 --- a/arch/arm/lib/cache.c +++ b/arch/arm/lib/cache.c @@ -53,3 +53,15 @@ void __flush_dcache_all(void) } void flush_dcache_all(void) __attribute__((weak, alias("__flush_dcache_all"))); + + +/* + * Default implementation of enable_caches() + * Real implementation should be in platform code + */ +void __enable_caches(void) +{ + puts("WARNING: Caches not enabled\n"); +} +void enable_caches(void) + __attribute__((weak, alias("__enable_caches"))); diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S index 3b5aeec4cf..f655256b5d 100644 --- a/arch/arm/lib/memcpy.S +++ b/arch/arm/lib/memcpy.S @@ -60,6 +60,9 @@ .globl memcpy memcpy: + cmp r0, r1 + moveq pc, lr + enter r4, lr subs r2, r2, #4 diff --git a/board/armadillo/armadillo.c b/board/armadillo/armadillo.c deleted file mode 100644 index a825144c5c..0000000000 --- a/board/armadillo/armadillo.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com> - * Armadillo board HT1070 - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#include <clps7111.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* Activate LED flasher */ - IO_LEDFLSH = 0x40; - - /* arch number MACH_TYPE_ARMADILLO - not official*/ - gd->bd->bi_arch_number = 83; - - /* location of boot parameters */ - gd->bd->bi_boot_params = 0xc0000100; - - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return (0); -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_CS8900 - rc = cs8900_initialize(0, CONFIG_CS8900_BASE); -#endif - return rc; -} -#endif diff --git a/board/armadillo/config.mk b/board/armadillo/config.mk deleted file mode 100644 index ecb8b745cf..0000000000 --- a/board/armadillo/config.mk +++ /dev/null @@ -1,29 +0,0 @@ -# -# (C) Copyright 2000 -# Sysgo Real-Time Solutions, GmbH <www.elinos.com> -# Marius Groeger <mgroeger@sysgo.de> -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -#address where u-boot will be relocated -CONFIG_SYS_TEXT_BASE = 0xc0f80000 diff --git a/board/armadillo/flash.c b/board/armadillo/flash.c deleted file mode 100644 index cf7d7f6a64..0000000000 --- a/board/armadillo/flash.c +++ /dev/null @@ -1,340 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com> - * Flash driver for armadillo board HT1070 - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -#define FLASH_BANK_SIZE 0x400000 - -/*value used by hermit is 0x200*/ -/*document says sector size is either 64k in low mem reg and 8k in high mem reg*/ -#define MAIN_SECT_SIZE 0x10000 - -#define UNALIGNED_MASK (3) -#define FL_WORD(addr) (*(volatile unsigned short*)(addr)) -#define FLASH_TIMEOUT 20000000 - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -/*----------------------------------------------------------------------- - */ - -ulong flash_init (void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - - flash_info[i].flash_id = (FUJ_MANUFACT & FLASH_VENDMASK); - /*(INTEL_ID_28F128J3 & FLASH_TYPEMASK); */ - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - if (i == 0) - flashbase = PHYS_FLASH_1; - else - panic ("configured too many flash banks!\n"); - for (j = 0; j < flash_info[i].sector_count; j++) { - flash_info[i].start[j] = - flashbase + j * MAIN_SECT_SIZE; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (FUJ_MANUFACT & FLASH_VENDMASK): - printf ("Fujitsu: "); - break; - default: - printf ("Unknown Vendor "); - break; - } -/* - switch (info->flash_id & FLASH_TYPEMASK) { - case (INTEL_ID_28F128J3 & FLASH_TYPEMASK): - printf ("28F128J3 (128Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - goto Done; - break; - } -*/ - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - -/* -Done: ; -*/ -} - -/* - * * Loop until both write state machines complete. - * */ -static unsigned short flash_status_wait (unsigned long addr, - unsigned short value) -{ - unsigned short status; - long timeout = FLASH_TIMEOUT; - - while (((status = (FL_WORD (addr))) != value) && timeout > 0) { - timeout--; - } - return status; -} - -/* - * Loop until the Write State machine is ready, then do a full error - * check. Clear status and leave the flash in Read Array mode; return - * 0 for no error, -1 for error. - */ -static int flash_status_full_check (unsigned long addr, unsigned short value1, - unsigned short value2) -{ - unsigned short status1, status2; - - status1 = flash_status_wait (addr, value1); - status2 = flash_status_wait (addr + 2, value2); - return (status1 != value1 || status2 != value2) ? -1 : 0; -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, prot, sect; - int rc = ERR_OK; - unsigned long base; - unsigned long addr; - ulong start; - - if ((info->flash_id & FLASH_VENDMASK) != - (FUJ_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - flag = disable_interrupts (); - - printf ("Erasing %d sectors starting at sector %2d.\n" - "This make take some time ... ", - s_last - s_first, sect); - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { - /* ARM simple, non interrupt dependent timer */ - start = get_timer(0); - - if (info->protect[sect] == 0) { /* not protected */ - - addr = sect * MAIN_SECT_SIZE; - addr &= ~(unsigned long) UNALIGNED_MASK; /* word align */ - base = addr & 0xF0000000; - - FL_WORD (base + (0x555 << 1)) = 0xAA; - FL_WORD (base + (0x2AA << 1)) = 0x55; - FL_WORD (base + (0x555 << 1)) = 0x80; - FL_WORD (base + (0x555 << 1)) = 0xAA; - FL_WORD (base + (0x2AA << 1)) = 0x55; - FL_WORD (addr) = 0x30; - if (flash_status_full_check (addr, 0xFFFF, 0xFFFF)) - return ERR_PROTECTED; - } - } - printf ("\nDone.\n"); - if (ctrlc ()) - printf ("User Interrupt!\n"); - - /* allow flash to settle - wait 10 ms */ - udelay_masked (10000); - - if (flag) - enable_interrupts (); - - return rc; -} - - -/*----------------------------------------------------------------------- - * Copy memory to flash - */ - -static int write_word (flash_info_t * info, ulong dest, ushort data) -{ - int flag; - unsigned long base; - ulong start; - - /* Check if Flash is (sufficiently) erased - */ - if ((FL_WORD (dest) & data) != data) - return ERR_NOT_ERASED; - - /*if(dest & UNALIGNED_MASK) return ERR_ALIGN; */ - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - flag = disable_interrupts (); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - base = dest & 0xF0000000; - FL_WORD (base + (0x555 << 1)) = 0xAA; - FL_WORD (base + (0x2AA << 1)) = 0x55; - FL_WORD (base + (0x555 << 1)) = 0xA0; - FL_WORD (dest) = data; - /*printf("writing 0x%p = 0x%x\n",dest,data); */ - if (flash_status_wait (dest, data) != data) - return ERR_PROG_ERROR; - - if (flag) - enable_interrupts (); - - return ERR_OK; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash. - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - ushort data; - int l; - int i, rc; - - wp = (addr & ~1); /* get lower word aligned address */ - printf ("Writing %lu short data to 0x%lx from 0x%p.\n ", cnt, wp, src); - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - for (; i < 2 && cnt > 0; ++i) { - data = (data >> 8) | (*src++ << 8); - --cnt; - ++cp; - } - for (; cnt == 0 && i < 2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - wp += 2; - } - - /* - * handle word aligned part - */ - while (cnt >= 2) { - data = *((vu_short *) src); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 0) { - printf ("\nDone.\n"); - return ERR_OK; - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 8); - --cnt; - } - for (; i < 2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - - return write_word (info, wp, data); -} diff --git a/board/armadillo/lowlevel_init.S b/board/armadillo/lowlevel_init.S deleted file mode 100644 index e7d373d274..0000000000 --- a/board/armadillo/lowlevel_init.S +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Initialization stuff - taken from hermit - * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com> - * Armadillo board HT1070 - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include <config.h> -#include <version.h> - - -/* some parameters for the board */ -/* setting up the memory */ -#define SRAM_START 0x60000000 -#define SRAM_SIZE 0x0000c000 - -.globl lowlevel_init -lowlevel_init: - mov r0, #0x70 /* 32-bit code + data, MMU mandatory */ - mcr p15, 0, r0, c1, c0, 0 /* MMU init */ - - mov r0, #0 - mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ - mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ - - mov r0, #0x80000000 /* I/O base */ - - mov r1, #0x6 /* CLKCTL_73 in SYSCON3 */ - add r2, r0, #0x2200 /* address of SYSCON3 in r2 */ - str r1, [r2] /* set clock speed to 73.728 MHz */ - - mov r1, #0x81 /* 64KHz DRAM refresh period */ - str r1, [r0, #0x200] /* set DRFPR */ - - mov r1, #0x500 /* permanent enable, 16bits wide */ - add r1, r1, #0x42 /* 128Mbit, CAS lat = 2 SDRAM */ - add r2, r0, #0x2300 /* load address in r2 */ - str r1, [r2] - - mov r1, #0x100 /* SDRAM refresh rate */ - add r2, r0, #0x2340 /* load address in r2 */ - str r1, [r2] - - mov sp, #SRAM_START /* init stack pointer */ - add sp, sp, #SRAM_SIZE - - /* everything is fine now */ - mov pc, lr diff --git a/board/armltd/integrator/integrator.c b/board/armltd/integrator/integrator.c index 9bb56b5208..c8d2bc7bac 100644 --- a/board/armltd/integrator/integrator.c +++ b/board/armltd/integrator/integrator.c @@ -86,15 +86,9 @@ int misc_init_r (void) return (0); } -/****************************** - Routine: - Description: -******************************/ int dram_init (void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; #ifdef CONFIG_CM_SPD_DETECT { extern void dram_query(void); @@ -118,8 +112,13 @@ extern void dram_query(void); */ sdram_shift = ((cm_reg_sdram & 0x0000001C)/4)%4; gd->bd->bi_dram[0].size = 0x01000000 << sdram_shift; - + gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, + 0x01000000 << sdram_shift); } +#else + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, + PHYS_SDRAM_1_SIZE); #endif /* CM_SPD_DETECT */ return 0; diff --git a/board/armltd/integrator/lowlevel_init.S b/board/armltd/integrator/lowlevel_init.S index ab9589c95c..6f55bb548c 100644 --- a/board/armltd/integrator/lowlevel_init.S +++ b/board/armltd/integrator/lowlevel_init.S @@ -199,7 +199,7 @@ cm_remap: /* Now 0x00000000 is writeable, replace the vectors */ ldr r0, =_start /* r0 <- start of vectors */ - ldr r2, =_armboot_start /* r2 <- past vectors */ + ldr r2, =_TEXT_BASE /* r2 <- past vectors */ sub r1,r1,r1 /* destination 0x00000000 */ copy_vec: diff --git a/board/armltd/integrator/split_by_variant.sh b/board/armltd/integrator/split_by_variant.sh deleted file mode 100755 index 19fc832c2a..0000000000 --- a/board/armltd/integrator/split_by_variant.sh +++ /dev/null @@ -1,220 +0,0 @@ -#!/bin/sh - -mkdir -p ${obj}include -mkdir -p ${obj}board/armltd/integrator - -config_file=${obj}include/config.h - -if [ "$1" = "ap" ] -then -# --------------------------------------------------------- -# Set the platform defines -# --------------------------------------------------------- -cat > ${config_file} << _EOF -/* Integrator configuration implied by Makefile target */ -#define CONFIG_INTEGRATOR /* Integrator board */ -#define CONFIG_ARCH_INTEGRATOR 1 /* Integrator/AP */ -_EOF - -# --------------------------------------------------------- -# Set the core module defines according to Core Module -# --------------------------------------------------------- -cpu="arm_intcm" -variant="unknown core module" - -if [ "$2" = "" ] -then - echo "$0:: No parameters - using arm_intcm" -else - case "$2" in - ap7_config) - cpu="arm_intcm" - variant="unported core module CM7TDMI" - ;; - - ap966) - cpu="arm_intcm" - variant="unported core module CM966E-S" - ;; - - ap922_config) - cpu="arm_intcm" - variant="unported core module CM922T" - ;; - - integratorap_config | \ - ap_config) - cpu="arm_intcm" - variant="unspecified core module" - ;; - - ap720t_config) - cpu="arm720t" - echo "#define CONFIG_CM720T 1 /* CPU core is ARM720T */" \ - >> ${config_file} - variant="Core module CM720T" - ;; - - ap922_XA10_config) - cpu="arm_intcm" - variant="unported core module CM922T_XA10" - echo "#define CONFIG_CM922T_XA10 1 /* CPU core is ARM922T_XA10 */" \ - >> ${config_file} - ;; - - ap920t_config) - cpu="arm920t" - variant="Core module CM920T" - echo "#define CONFIG_CM920T 1 /* CPU core is ARM920T */" \ - >> ${config_file} - ;; - - ap926ejs_config) - cpu="arm926ejs" - variant="Core module CM926EJ-S" - echo "#define CONFIG_CM926EJ_S 1 /* CPU core is ARM926EJ-S */" \ - >> ${config_file} - ;; - - ap946es_config) - cpu="arm946es" - variant="Core module CM946E-S" - echo "#define CONFIG_CM946E_S 1 /* CPU core is ARM946E-S */" \ - >> ${config_file} - ;; - - *) - echo "$0:: Unknown core module" - variant="unknown core module" - cpu="arm_intcm" - ;; - - esac -fi - -case "$cpu" in - arm_intcm) - cat >> ${config_file} << _EOF -/* Core module undefined/not ported */ -#define CONFIG_ARM_INTCM 1 -#undef CONFIG_CM_MULTIPLE_SSRAM /* CM may not have multiple SSRAM mapping */ -#undef CONFIG_CM_SPD_DETECT /* CM may not support SPD query */ -#undef CONFIG_CM_REMAP /* CM may not support remapping */ -#undef CONFIG_CM_INIT /* CM may not have initialization reg */ -#undef CONFIG_CM_TCRAM /* CM may not have TCRAM */ -/* May not be processor without cache support */ -#define CONFIG_SYS_ICACHE_OFF 1 -#define CONFIG_SYS_DCACHE_OFF 1 -_EOF - ;; - - arm720t) - cat >> ${config_file} << _EOF -/* May not be processor without cache support */ -#define CONFIG_SYS_ICACHE_OFF 1 -#define CONFIG_SYS_DCACHE_OFF 1 -_EOF - ;; -esac - -else - -# --------------------------------------------------------- -# Set the platform defines -# --------------------------------------------------------- -cat >> ${config_file} << _EOF -/* Integrator configuration implied by Makefile target */ -#define CONFIG_INTEGRATOR /* Integrator board */ -#define CONFIG_ARCH_CINTEGRATOR 1 /* Integrator/CP */ -_EOF - -cpu="arm_intcm" -variant="unknown core module" - -if [ "$2" = "" ] -then - echo "$0:: No parameters - using arm_intcm" -else - case "$2" in - ap966) - cpu="arm_intcm" - variant="unported core module CM966E-S" - ;; - - ap922_config) - cpu="arm_intcm" - variant="unported core module CM922T" - ;; - - integratorcp_config | \ - cp_config) - cpu="arm_intcm" - variant="unspecified core module" - ;; - - cp922_XA10_config) - cpu="arm_intcm" - variant="unported core module CM922T_XA10" - echo "#define CONFIG_CM922T_XA10 1 /* CPU core is ARM922T_XA10 */" \ - >> ${config_file} - ;; - - cp920t_config) - cpu="arm920t" - variant="Core module CM920T" - echo "#define CONFIG_CM920T 1 /* CPU core is ARM920T */" \ - >> ${config_file} - ;; - - cp926ejs_config) - cpu="arm926ejs" - variant="Core module CM926EJ-S" - echo "#define CONFIG_CM926EJ_S 1 /* CPU core is ARM926EJ-S */" \ - >> ${config_file} - ;; - - - cp946es_config) - cpu="arm946es" - variant="Core module CM946E-S" - echo "#define CONFIG_CM946E_S 1 /* CPU core is ARM946E-S */" \ - >> ${config_file} - ;; - - cp1136_config) - cpu="arm1136" - variant="Core module CM1136EJF-S" - echo "#define CONFIG_CM1136EJF_S 1 /* CPU core is ARM1136JF-S */" \ - >> ${config_file} - ;; - - *) - echo "$0:: Unknown core module" - variant="unknown core module" - cpu="arm_intcm" - ;; - - esac - -fi - -if [ "$cpu" = "arm_intcm" ] -then - cat >> ${config_file} << _EOF -/* Core module undefined/not ported */ -#define CONFIG_ARM_INTCM 1 -#undef CONFIG_CM_MULTIPLE_SSRAM /* CM may not have multiple SSRAM mapping */ -#undef CONFIG_CM_SPD_DETECT /* CM may not support SPD query */ -#undef CONFIG_CM_REMAP /* CM may not support remapping */ -#undef CONFIG_CM_INIT /* CM may not have initialization reg */ -#undef CONFIG_CM_TCRAM /* CM may not have TCRAM */ -_EOF -fi - -fi # ap - -# --------------------------------------------------------- -# Complete the configuration -# --------------------------------------------------------- -$MKCONFIG -a -n "${2%%_config}" integrator$1 arm $cpu integrator armltd -echo "Variant: $variant with core $cpu" diff --git a/board/armltd/versatile/versatile.c b/board/armltd/versatile/versatile.c index ee8cb5e3c7..4a5c31dbf7 100644 --- a/board/armltd/versatile/versatile.c +++ b/board/armltd/versatile/versatile.c @@ -94,7 +94,7 @@ int misc_init_r (void) int dram_init (void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/assabet/Makefile b/board/assabet/Makefile deleted file mode 100644 index b3cf4aa01c..0000000000 --- a/board/assabet/Makefile +++ /dev/null @@ -1,53 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# 2004 (c) MontaVista Software, Inc. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := assabet.o -SOBJS := setup.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/assabet/assabet.c b/board/assabet/assabet.c deleted file mode 100644 index 753c8d2435..0000000000 --- a/board/assabet/assabet.c +++ /dev/null @@ -1,131 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * 2004 (c) MontaVista Software, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#include <SA-1100.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - -/* - * Board dependent initialisation - */ - -#define ECOR 0x8000 -#define ECOR_RESET 0x80 -#define ECOR_LEVEL_IRQ 0x40 -#define ECOR_WR_ATTRIB 0x04 -#define ECOR_ENABLE 0x01 - -#define ECSR 0x8002 -#define ECSR_IOIS8 0x20 -#define ECSR_PWRDWN 0x04 -#define ECSR_INT 0x02 -#define SMC_IO_SHIFT 2 -#define NCR_0 (*((volatile u_char *)(0x100000a0))) -#define NCR_ENET_OSC_EN (1<<3) - -static inline u8 -readb(volatile u8 * p) -{ - return *p; -} - -static inline void -writeb(u8 v, volatile u8 * p) -{ - *p = v; -} - -static void -smc_init(void) -{ - u8 ecor; - u8 ecsr; - volatile u8 *addr = (volatile u8 *)(0x18000000 + (1 << 25)); - - NCR_0 |= NCR_ENET_OSC_EN; - udelay(100); - - ecor = readb(addr + (ECOR << SMC_IO_SHIFT)) & ~ECOR_RESET; - writeb(ecor | ECOR_RESET, addr + (ECOR << SMC_IO_SHIFT)); - udelay(100); - - /* - * The device will ignore all writes to the enable bit while - * reset is asserted, even if the reset bit is cleared in the - * same write. Must clear reset first, then enable the device. - */ - writeb(ecor, addr + (ECOR << SMC_IO_SHIFT)); - writeb(ecor | ECOR_ENABLE, addr + (ECOR << SMC_IO_SHIFT)); - - /* - * Set the appropriate byte/word mode. - */ - ecsr = readb(addr + (ECSR << SMC_IO_SHIFT)) & ~ECSR_IOIS8; - ecsr |= ECSR_IOIS8; - writeb(ecsr, addr + (ECSR << SMC_IO_SHIFT)); - udelay(100); -} - -static void -neponset_init(void) -{ - smc_init(); -} - -int -board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_ASSABET; - gd->bd->bi_boot_params = 0xc0000100; - - neponset_init(); - - return 0; -} - -int -dram_init(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return (0); -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_LAN91C96 - rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); -#endif - return rc; -} -#endif diff --git a/board/assabet/config.mk b/board/assabet/config.mk deleted file mode 100644 index d9866a0eb2..0000000000 --- a/board/assabet/config.mk +++ /dev/null @@ -1,7 +0,0 @@ -# -# SA-1110 based Intel Assabet board -# -# The Intel Assabet 1 bank of 32 MiB SDRAM -# - -CONFIG_SYS_TEXT_BASE = 0xc1f00000 diff --git a/board/assabet/setup.S b/board/assabet/setup.S deleted file mode 100644 index 56ea0dd928..0000000000 --- a/board/assabet/setup.S +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * 2004 (c) MontaVista Software, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include "config.h" -#include "version.h" - - -/*----------------------------------------------------------------------- - * Board defines: - */ - -#define MDCNFG 0x00 -#define MDCAS00 0x04 -#define MDCAS01 0x08 -#define MDCAS02 0x0C -#define MSC0 0x10 -#define MSC1 0x14 -#define MECR 0x18 -#define MDREFR 0x1C -#define MDCAS20 0x20 -#define MDCAS21 0x24 -#define MDCAS22 0x28 -#define MSC2 0x2C -#define SMCNFG 0x30 - -#define ASSABET_BCR (0x12000000) -#define ASSABET_BCR_DB1110 (0x00a07490 | (0<<16) | (0<<17)) -#define ASSABET_SCR_nNEPONSET (1 << 9) -#define NEPONSET_LEDS (0x10000010) - - -/*----------------------------------------------------------------------- - * Setup parameters for the board: - */ - - -MEM_BASE: .long 0xa0000000 -MEM_START: .long 0xc0000000 - -mdcnfg: .long 0x72547254 -mdcas00: .long 0xaaaaaa7f -mdcas01: .long 0xaaaaaaaa -mdcas02: .long 0xaaaaaaaa -msc0: .long 0x4b384370 -msc1: .long 0x22212419 -mecr: .long 0x994a994a -mdrefr: .long 0x04340327 -mdcas20: .long 0xaaaaaa7f -mdcas21: .long 0xaaaaaaaa -mdcas22: .long 0xaaaaaaaa -msc2: .long 0x42196669 -smcnfg: .long 0x00000000 - -BCR: .long ASSABET_BCR -BCR_DB1110: .long ASSABET_BCR_DB1110 -LEDS: .long NEPONSET_LEDS - - - .globl lowlevel_init -lowlevel_init: - - /* Setting up the memory and stuff */ - - ldr r0, MEM_BASE - ldr r1, mdcas00 - str r1, [r0, #MDCAS00] - ldr r1, mdcas01 - str r1, [r0, #MDCAS01] - ldr r1, mdcas02 - str r1, [r0, #MDCAS02] - ldr r1, mdcas20 - str r1, [r0, #MDCAS20] - ldr r1, mdcas21 - str r1, [r0, #MDCAS21] - ldr r1, mdcas22 - str r1, [r0, #MDCAS22] - ldr r1, mdrefr - str r1, [r0, #MDREFR] - ldr r1, mecr - str r1, [r0, #MECR] - ldr r1, msc0 - str r1, [r0, #MSC0] - ldr r1, msc1 - str r1, [r0, #MSC1] - ldr r1, msc2 - str r1, [r0, #MSC2] - ldr r1, smcnfg - str r1, [r0, #SMCNFG] - - ldr r1, mdcnfg - str r1, [r0, #MDCNFG] - - /* Load something to activate bank */ - ldr r2, MEM_START -.rept 8 - ldr r3, [r2] -.endr - - /* Enable SDRAM */ - orr r1, r1, #0x00000001 - str r1, [r0, #MDCNFG] - - ldr r1, BCR - ldr r2, BCR_DB1110 - str r2, [r1] - - ldr r1, LEDS - mov r0, #0x3 - str r0, [r1] - - /* All done... */ - mov pc, lr diff --git a/board/atmel/at91cap9adk/Makefile b/board/atmel/at91cap9adk/Makefile deleted file mode 100644 index 2eec0ce231..0000000000 --- a/board/atmel/at91cap9adk/Makefile +++ /dev/null @@ -1,56 +0,0 @@ -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2008 -# Stelian Pop <stelian.pop@leadtechdesign.com> -# Lead Tech Design <www.leadtechdesign.com> -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS-y += at91cap9adk.o -COBJS-y += led.o -COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o - -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS-y)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c deleted file mode 100644 index 2ab8bc2c43..0000000000 --- a/board/atmel/at91cap9adk/at91cap9adk.c +++ /dev/null @@ -1,352 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian.pop@leadtechdesign.com> - * Lead Tech Design <www.leadtechdesign.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/at91cap9.h> -#include <asm/arch/at91cap9_matrix.h> -#include <asm/arch/at91sam9_smc.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_rstc.h> -#include <asm/arch/clk.h> -#include <asm/arch/gpio.h> -#include <asm/arch/io.h> -#include <asm/arch/hardware.h> -#include <lcd.h> -#include <atmel_lcdc.h> -#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) -#include <net.h> -#endif -#include <netdev.h> - -#define MP_BLOCK_3_BASE 0xFDF00000 - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ -/* - * Miscelaneous platform dependent initialisations - */ - -static void at91cap9_slowclock_hw_init(void) -{ - /* - * On AT91CAP9 revC CPUs, the slow clock can be based on an - * internal impreciseRC oscillator or an external 32kHz oscillator. - * Switch to the latter. - */ -#define ARCH_ID_AT91CAP9_REVB 0x399 -#define ARCH_ID_AT91CAP9_REVC 0x601 - if (at91_sys_read(AT91_PMC_VER) == ARCH_ID_AT91CAP9_REVC) { - unsigned i, tmp = at91_sys_read(AT91_SCKCR); - if ((tmp & AT91CAP9_SCKCR_OSCSEL) == AT91CAP9_SCKCR_OSCSEL_RC) { - timer_init(); - tmp |= AT91CAP9_SCKCR_OSC32EN; - at91_sys_write(AT91_SCKCR, tmp); - for (i = 0; i < 1200; i++) - udelay(1000); - tmp |= AT91CAP9_SCKCR_OSCSEL_32; - at91_sys_write(AT91_SCKCR, tmp); - udelay(200); - tmp &= ~AT91CAP9_SCKCR_RCEN; - at91_sys_write(AT91_SCKCR, tmp); - } - } -} - -static void at91cap9_nor_hw_init(void) -{ - unsigned long csa; - - /* Ensure EBI supply is 3.3V */ - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, - csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); - /* Configure SMC CS0 for parallel flash */ - at91_sys_write(AT91_SMC_SETUP(0), - AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2) | - AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2)); - at91_sys_write(AT91_SMC_PULSE(0), - AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10) | - AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10)); - at91_sys_write(AT91_SMC_CYCLE(0), - AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16)); - at91_sys_write(AT91_SMC_MODE(0), - AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | - AT91_SMC_DBW_16 | AT91_SMC_TDF_(1)); -} - -#ifdef CONFIG_CMD_NAND -static void at91cap9_nand_hw_init(void) -{ - unsigned long csa; - - /* Enable CS3 */ - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, - csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | - AT91_MATRIX_EBI_VDDIOMSEL_3_3V); - - /* Configure SMC CS3 for NAND/SmartMedia */ - at91_sys_write(AT91_SMC_SETUP(3), - AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1) | - AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1)); - at91_sys_write(AT91_SMC_PULSE(3), - AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6) | - AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6)); - at91_sys_write(AT91_SMC_CYCLE(3), - AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8)); - at91_sys_write(AT91_SMC_MODE(3), - AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE | -#ifdef CONFIG_SYS_NAND_DBW_16 - AT91_SMC_DBW_16 | -#else /* CONFIG_SYS_NAND_DBW_8 */ - AT91_SMC_DBW_8 | -#endif - AT91_SMC_TDF_(1)); - - at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD); - - /* RDY/BSY is not connected */ - - /* Enable NandFlash */ - at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); -} -#endif - -#ifdef CONFIG_MACB -static void at91cap9_macb_hw_init(void) -{ - /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_EMAC); - - /* - * Disable pull-up on: - * RXDV (PB22) => PHY normal mode (not Test mode) - * ERX0 (PB25) => PHY ADDR0 - * ERX1 (PB26) => PHY ADDR1 => PHYADDR = 0x0 - * - * PHY has internal pull-down - */ - writel(pin_to_mask(AT91_PIN_PB22) | - pin_to_mask(AT91_PIN_PB25) | - pin_to_mask(AT91_PIN_PB26), - pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); - - /* Need to reset PHY -> 500ms reset */ - at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | - (AT91_RSTC_ERSTL & (0x0D << 8)) | - AT91_RSTC_URSTEN); - - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); - - /* Wait for end hardware reset */ - while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); - - /* Restore NRST value */ - at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | - (AT91_RSTC_ERSTL & (0x0 << 8)) | - AT91_RSTC_URSTEN); - - /* Re-enable pull-up */ - writel(pin_to_mask(AT91_PIN_PB22) | - pin_to_mask(AT91_PIN_PB25) | - pin_to_mask(AT91_PIN_PB26), - pin_to_controller(AT91_PIN_PA0) + PIO_PUER); - - at91_macb_hw_init(); - - /* Unlock EMAC, 3 0 2 1 sequence */ -#define MP_MAC_KEY0 0x5969cb2a -#define MP_MAC_KEY1 0xb4a1872e -#define MP_MAC_KEY2 0x05683fbc -#define MP_MAC_KEY3 0x3634fba4 -#define UNLOCK_MAC 0x00000008 - writel(MP_MAC_KEY3, MP_BLOCK_3_BASE + 0x3c); - writel(MP_MAC_KEY0, MP_BLOCK_3_BASE + 0x30); - writel(MP_MAC_KEY2, MP_BLOCK_3_BASE + 0x38); - writel(MP_MAC_KEY1, MP_BLOCK_3_BASE + 0x34); - writel(UNLOCK_MAC, MP_BLOCK_3_BASE + 0x40); -} -#endif - -#ifdef CONFIG_USB_OHCI_NEW -static void at91cap9_uhp_hw_init(void) -{ - /* Unlock USB OHCI, 3 2 0 1 sequence */ -#define MP_OHCI_KEY0 0x896c11ca -#define MP_OHCI_KEY1 0x68ebca21 -#define MP_OHCI_KEY2 0x4823efbc -#define MP_OHCI_KEY3 0x8651aae4 -#define UNLOCK_OHCI 0x00000010 - writel(MP_OHCI_KEY3, MP_BLOCK_3_BASE + 0x3c); - writel(MP_OHCI_KEY2, MP_BLOCK_3_BASE + 0x38); - writel(MP_OHCI_KEY0, MP_BLOCK_3_BASE + 0x30); - writel(MP_OHCI_KEY1, MP_BLOCK_3_BASE + 0x34); - writel(UNLOCK_OHCI, MP_BLOCK_3_BASE + 0x40); -} -#endif - -#ifdef CONFIG_LCD -vidinfo_t panel_info = { - vl_col: 240, - vl_row: 320, - vl_clk: 4965000, - vl_sync: ATMEL_LCDC_INVLINE_INVERTED | - ATMEL_LCDC_INVFRAME_INVERTED, - vl_bpix: 3, - vl_tft: 1, - vl_hsync_len: 5, - vl_left_margin: 1, - vl_right_margin:33, - vl_vsync_len: 1, - vl_upper_margin:1, - vl_lower_margin:0, - mmio: AT91CAP9_LCDC_BASE, -}; - -void lcd_enable(void) -{ - at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */ -} - -void lcd_disable(void) -{ - at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */ -} - -static void at91cap9_lcd_hw_init(void) -{ - at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ - at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ - at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ - at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ - at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ - at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ - at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ - at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ - at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ - at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ - at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ - at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */ - at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ - at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ - at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ - at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ - at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ - at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */ - at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ - at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ - - at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_LCDC); - - gd->fb_base = 0; -} - -#ifdef CONFIG_LCD_INFO -#include <nand.h> -#include <version.h> - -void lcd_show_board_info(void) -{ - ulong dram_size, nand_size; - int i; - char temp[32]; - - lcd_printf ("%s\n", U_BOOT_VERSION); - lcd_printf ("(C) 2008 ATMEL Corp\n"); - lcd_printf ("at91support@atmel.com\n"); - lcd_printf ("%s CPU at %s MHz\n", - CONFIG_SYS_AT91_CPU_NAME, - strmhz(temp, get_cpu_clk_rate())); - - dram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) - dram_size += gd->bd->bi_dram[i].size; - nand_size = 0; - for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) - nand_size += nand_info[i].size; - lcd_printf (" %ld MB SDRAM, %ld MB NAND\n", - dram_size >> 20, - nand_size >> 20 ); -} -#endif /* CONFIG_LCD_INFO */ -#endif - -int board_init(void) -{ - /* Enable Ctrlc */ - console_init_f(); - - /* arch number of AT91CAP9ADK-Board */ - gd->bd->bi_arch_number = MACH_TYPE_AT91CAP9ADK; - /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - at91_serial_hw_init(); - at91cap9_slowclock_hw_init(); - at91cap9_nor_hw_init(); -#ifdef CONFIG_CMD_NAND - at91cap9_nand_hw_init(); -#endif -#ifdef CONFIG_HAS_DATAFLASH - at91_spi0_hw_init(1 << 0); -#endif -#ifdef CONFIG_MACB - at91cap9_macb_hw_init(); -#endif -#ifdef CONFIG_USB_OHCI_NEW - at91cap9_uhp_hw_init(); -#endif -#ifdef CONFIG_LCD - at91cap9_lcd_hw_init(); -#endif - return 0; -} - -int dram_init(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; - return 0; -} - -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ -} -#endif - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)AT91CAP9_BASE_EMAC, 0x00); -#endif - return rc; -} diff --git a/board/atmel/at91cap9adk/config.mk b/board/atmel/at91cap9adk/config.mk deleted file mode 100644 index 797da0eafe..0000000000 --- a/board/atmel/at91cap9adk/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x73000000 diff --git a/board/atmel/at91rm9200dk/Makefile b/board/atmel/at91rm9200dk/Makefile deleted file mode 100644 index bc3dbc609d..0000000000 --- a/board/atmel/at91rm9200dk/Makefile +++ /dev/null @@ -1,56 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS-y += $(BOARD).o -COBJS-y += flash.o -COBJS-y += led.o -ifdef CONFIG_HAS_DATAFLASH -COBJS-$(CONFIG_DATAFLASH_MMC_SELECT) += mux.o -COBJS-y += partition.o -endif - -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS-y)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/atmel/at91rm9200dk/at91rm9200dk.c b/board/atmel/at91rm9200dk/at91rm9200dk.c deleted file mode 100644 index 49b5fe3203..0000000000 --- a/board/atmel/at91rm9200dk/at91rm9200dk.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <exports.h> -#include <netdev.h> -#include <asm/arch/AT91RM9200.h> -#include <asm/io.h> - -#if defined(CONFIG_DRIVER_ETHER) -#include <at91rm9200_net.h> -#include <dm9161.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* Enable Ctrlc */ - console_init_f (); - - /* Correct IRDA resistor problem */ - /* Set PA23_TXD in Output */ - ((AT91PS_PIO) AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2; - - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - /* arch number of AT91RM9200DK-Board */ - gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200DK; - /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - return 0; -} - -void board_reset (void) -{ - AT91PS_PIO pio = AT91C_BASE_PIOA; - - /* Clear PA19 to trigger the hard reset */ - writel(0x00080000, pio->PIO_CODR); - writel(0x00080000, pio->PIO_OER); - writel(0x00080000, pio->PIO_PER); -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; - return 0; -} - -#ifdef CONFIG_DRIVER_ETHER -#if defined(CONFIG_CMD_NET) - -/* - * Name: - * at91rm9200_GetPhyInterface - * Description: - * Initialise the interface functions to the PHY - * Arguments: - * None - * Return value: - * None - */ -void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops) -{ - p_phyops->Init = dm9161_InitPhy; - p_phyops->IsPhyConnected = dm9161_IsPhyConnected; - p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed; - p_phyops->AutoNegotiate = dm9161_AutoNegotiate; -} - -#endif -#endif /* CONFIG_DRIVER_ETHER */ - -#ifdef CONFIG_DRIVER_AT91EMAC -int board_eth_init(bd_t *bis) -{ - int rc = 0; - rc = at91emac_register(bis, 0); - return rc; -} -#endif - -/* - * Disk On Chip (NAND) Millenium initialization. - * The NAND lives in the CS2* space - */ -#if defined(CONFIG_CMD_NAND) -extern ulong nand_probe (ulong physadr); - -#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */ -void nand_init (void) -{ - /* Setup Smart Media, fitst enable the address range of CS3 */ - *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia; - /* set the bus interface characteristics based on - tDS Data Set up Time 30 - ns - tDH Data Hold Time 20 - ns - tALS ALE Set up Time 20 - ns - 16ns at 60 MHz ~= 3 */ -/*memory mapping structures */ -#define SM_ID_RWH (5 << 28) -#define SM_RWH (1 << 28) -#define SM_RWS (0 << 24) -#define SM_TDF (1 << 8) -#define SM_NWS (3) - AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS | - AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 | - SM_TDF | AT91C_SMC2_WSEN | SM_NWS); - - /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */ - *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | - AT91C_PC3_BFBAA_SMWE; - *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | - AT91C_PC3_BFBAA_SMWE; - - /* Configure PC2 as input (signal READY of the SmartMedia) */ - *AT91C_PIOC_PER = AT91C_PC2_BFAVD; /* enable direct output enable */ - *AT91C_PIOC_ODR = AT91C_PC2_BFAVD; /* disable output */ - - /* Configure PB1 as input (signal Card Detect of the SmartMedia) */ - *AT91C_PIOB_PER = AT91C_PIO_PB1; /* enable direct output enable */ - *AT91C_PIOB_ODR = AT91C_PIO_PB1; /* disable output */ - - /* PIOB and PIOC clock enabling */ - *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB; - *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC; - - if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1) - printf (" No SmartMedia card inserted\n"); -#ifdef DEBUG - printf (" SmartMedia card inserted\n"); - - printf ("Probing at 0x%.8x\n", AT91_SMARTMEDIA_BASE); -#endif - printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20); -} -#endif diff --git a/board/atmel/at91rm9200dk/config.mk b/board/atmel/at91rm9200dk/config.mk deleted file mode 100644 index 207769233e..0000000000 --- a/board/atmel/at91rm9200dk/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x21f00000 diff --git a/board/atmel/at91rm9200dk/flash.c b/board/atmel/at91rm9200dk/flash.c deleted file mode 100644 index be2274362c..0000000000 --- a/board/atmel/at91rm9200dk/flash.c +++ /dev/null @@ -1,504 +0,0 @@ -/* - * (C) Copyright 2002 - * Lineo, Inc. <www.lineo.com> - * Bernhard Kuhn <bkuhn@lineo.com> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -ulong myflush(void); - - -/* Flash Organization Structure */ -typedef struct OrgDef -{ - unsigned int sector_number; - unsigned int sector_size; -} OrgDef; - - -/* Flash Organizations */ -OrgDef OrgAT49BV16x4[] = -{ - { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ - { 2, 32*1024 }, /* 2 * 32 kBytes sectors */ - { 30, 64*1024 }, /* 30 * 64 kBytes sectors */ -}; - -OrgDef OrgAT49BV16x4A[] = -{ - { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ - { 31, 64*1024 }, /* 31 * 64 kBytes sectors */ -}; - -OrgDef OrgAT49BV6416[] = -{ - { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ - { 127, 64*1024 }, /* 127 * 64 kBytes sectors */ -}; - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -/* AT49BV1614A Codes */ -#define FLASH_CODE1 0xAA -#define FLASH_CODE2 0x55 -#define ID_IN_CODE 0x90 -#define ID_OUT_CODE 0xF0 - - -#define CMD_READ_ARRAY 0x00F0 -#define CMD_UNLOCK1 0x00AA -#define CMD_UNLOCK2 0x0055 -#define CMD_ERASE_SETUP 0x0080 -#define CMD_ERASE_CONFIRM 0x0030 -#define CMD_PROGRAM 0x00A0 -#define CMD_UNLOCK_BYPASS 0x0020 -#define CMD_SECTOR_UNLOCK 0x0070 - -#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00005555<<1))) -#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00002AAA<<1))) - -#define BIT_ERASE_DONE 0x0080 -#define BIT_RDY_MASK 0x0080 -#define BIT_PROGRAM_ERROR 0x0020 -#define BIT_TIMEOUT 0x80000000 /* our flag */ - -#define READY 1 -#define ERR 2 -#define TMO 4 - -/*----------------------------------------------------------------------- - */ -void flash_identification (flash_info_t * info) -{ - volatile u16 manuf_code, device_code, add_device_code; - - MEM_FLASH_ADDR1 = FLASH_CODE1; - MEM_FLASH_ADDR2 = FLASH_CODE2; - MEM_FLASH_ADDR1 = ID_IN_CODE; - - manuf_code = *(volatile u16 *) CONFIG_SYS_FLASH_BASE; - device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + 2); - add_device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + (3 << 1)); - - MEM_FLASH_ADDR1 = FLASH_CODE1; - MEM_FLASH_ADDR2 = FLASH_CODE2; - MEM_FLASH_ADDR1 = ID_OUT_CODE; - - /* Vendor type */ - info->flash_id = ATM_MANUFACT & FLASH_VENDMASK; - printf ("Atmel: "); - - if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) { - - if ((add_device_code & FLASH_TYPEMASK) == - (ATM_ID_BV1614A & FLASH_TYPEMASK)) { - info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK; - printf ("AT49BV1614A (16Mbit)\n"); - } else { /* AT49BV1614 Flash */ - info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK; - printf ("AT49BV1614 (16Mbit)\n"); - } - - } else if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV6416 & FLASH_TYPEMASK)) { - info->flash_id |= ATM_ID_BV6416 & FLASH_TYPEMASK; - printf ("AT49BV6416 (64Mbit)\n"); - } -} - -ushort flash_number_sector(OrgDef *pOrgDef, unsigned int nb_blocks) -{ - int i, nb_sectors = 0; - - for (i=0; i<nb_blocks; i++){ - nb_sectors += pOrgDef[i].sector_number; - } - - return nb_sectors; -} - -void flash_unlock_sector(flash_info_t * info, unsigned int sector) -{ - volatile u16 *addr = (volatile u16 *) (info->start[sector]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - *addr = CMD_SECTOR_UNLOCK; -} - - -ulong flash_init (void) -{ - int i, j, k; - unsigned int flash_nb_blocks, sector; - unsigned int start_address; - OrgDef *pOrgDef; - - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - - flash_identification (&flash_info[i]); - - if ((flash_info[i].flash_id & FLASH_TYPEMASK) == - (ATM_ID_BV1614 & FLASH_TYPEMASK)) { - - pOrgDef = OrgAT49BV16x4; - flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef); - } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == - (ATM_ID_BV1614A & FLASH_TYPEMASK)){ /* AT49BV1614A Flash */ - - pOrgDef = OrgAT49BV16x4A; - flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef); - } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == - (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ - - pOrgDef = OrgAT49BV6416; - flash_nb_blocks = sizeof (OrgAT49BV6416) / sizeof (OrgDef); - } else { - flash_nb_blocks = 0; - pOrgDef = OrgAT49BV16x4; - } - - flash_info[i].sector_count = flash_number_sector(pOrgDef, flash_nb_blocks); - memset (flash_info[i].protect, 0, flash_info[i].sector_count); - - if (i == 0) - flashbase = PHYS_FLASH_1; - else - panic ("configured too many flash banks!\n"); - - sector = 0; - start_address = flashbase; - flash_info[i].size = 0; - - for (j = 0; j < flash_nb_blocks; j++) { - for (k = 0; k < pOrgDef[j].sector_number; k++) { - flash_info[i].start[sector++] = start_address; - start_address += pOrgDef[j].sector_size; - flash_info[i].size += pOrgDef[j].sector_size; - } - } - - size += flash_info[i].size; - - if ((flash_info[i].flash_id & FLASH_TYPEMASK) == - (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ - - /* Unlock all sectors at reset */ - for (j=0; j<flash_info[i].sector_count; j++){ - flash_unlock_sector(&flash_info[i], j); - } - } - } - - /* Protect binary boot image */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + CONFIG_SYS_BOOT_SIZE - 1, &flash_info[0]); - - /* Protect environment variables */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - - /* Protect U-Boot gzipped image */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_U_BOOT_BASE, - CONFIG_SYS_U_BOOT_BASE + CONFIG_SYS_U_BOOT_SIZE - 1, &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (ATM_MANUFACT & FLASH_VENDMASK): - printf ("Atmel: "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (ATM_ID_BV1614 & FLASH_TYPEMASK): - printf ("AT49BV1614 (16Mbit)\n"); - break; - case (ATM_ID_BV1614A & FLASH_TYPEMASK): - printf ("AT49BV1614A (16Mbit)\n"); - break; - case (ATM_ID_BV6416 & FLASH_TYPEMASK): - printf ("AT49BV6416 (64Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - return; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - ulong result; - int iflag, cflag, prot, sect; - int rc = ERR_OK; - int chip1; - ulong start; - - /* first look for protection bits */ - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != - (ATM_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - if (info->protect[sect] == 0) { /* not protected */ - volatile u16 *addr = (volatile u16 *) (info->start[sect]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - *addr = CMD_ERASE_CONFIRM; - - /* wait until flash is ready */ - chip1 = 0; - - do { - result = *addr; - - /* check timeout */ - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - chip1 = TMO; - break; - } - - if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE) - chip1 = READY; - - } while (!chip1); - - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - - if (chip1 == ERR) { - rc = ERR_PROG_ERROR; - goto outahere; - } - if (chip1 == TMO) { - rc = ERR_TIMOUT; - goto outahere; - } - - printf ("ok.\n"); - } else { /* it was protected */ - printf ("protected!\n"); - } - } - - if (ctrlc ()) - printf ("User Interrupt!\n"); - -outahere: - /* allow flash to settle - wait 10 ms */ - udelay_masked (10000); - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash - */ - -static int write_word (flash_info_t * info, ulong dest, ulong data) -{ - volatile u16 *addr = (volatile u16 *) dest; - ulong result; - int rc = ERR_OK; - int cflag, iflag; - int chip1; - ulong start; - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait until flash is ready */ - chip1 = 0; - do { - result = *addr; - - /* check timeout */ - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - chip1 = ERR | TMO; - break; - } - if (!chip1 && ((result & 0x80) == (data & 0x80))) - chip1 = READY; - - } while (!chip1); - - *addr = CMD_READ_ARRAY; - - if (chip1 == ERR || *addr != data) - rc = ERR_PROG_ERROR; - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash. - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong wp, data; - int rc; - - if (addr & 1) { - printf ("unaligned destination not supported\n"); - return ERR_ALIGN; - }; - - if ((int) src & 1) { - printf ("unaligned source not supported\n"); - return ERR_ALIGN; - }; - - wp = addr; - - while (cnt >= 2) { - data = *((volatile u16 *) src); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 1) { - data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) << - 8); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 1; - wp += 1; - cnt -= 1; - }; - - return ERR_OK; -} diff --git a/board/atmel/at91rm9200dk/led.c b/board/atmel/at91rm9200dk/led.c deleted file mode 100644 index 47a3bfce68..0000000000 --- a/board/atmel/at91rm9200dk/led.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * (C) Copyright 2006 - * Atmel Nordic AB <www.atmel.com> - * Ulf Samuelsson <ulf@atmel.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/AT91RM9200.h> - -#define GREEN_LED AT91C_PIO_PB0 -#define YELLOW_LED AT91C_PIO_PB1 -#define RED_LED AT91C_PIO_PB2 - -void green_LED_on(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_CODR = GREEN_LED; -} - -void yellow_LED_on(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_CODR = YELLOW_LED; -} - -void red_LED_on(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_CODR = RED_LED; -} - -void green_LED_off(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_SODR = GREEN_LED; -} - -void yellow_LED_off(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_SODR = YELLOW_LED; -} - -void red_LED_off(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_SODR = RED_LED; -} - - -void coloured_LED_init (void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - AT91PS_PMC PMC = AT91C_BASE_PMC; - PMC->PMC_PCER = (1 << AT91C_ID_PIOB); /* Enable PIOB clock */ - /* Disable peripherals on LEDs */ - PIOB->PIO_PER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; - /* Enable pins as outputs */ - PIOB->PIO_OER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; - /* Turn all LEDs OFF */ - PIOB->PIO_SODR = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; -} diff --git a/board/atmel/at91rm9200dk/mux.c b/board/atmel/at91rm9200dk/mux.c deleted file mode 100644 index a00563ede8..0000000000 --- a/board/atmel/at91rm9200dk/mux.c +++ /dev/null @@ -1,29 +0,0 @@ -#include <config.h> -#include <common.h> -#include <asm/hardware.h> -#include <dataflash.h> - -int AT91F_GetMuxStatus(void) { - AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */ - AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */ - - - if(AT91C_BASE_PIOB->PIO_ODSR & CONFIG_SYS_DATAFLASH_MMC_PIO) - return 1; - - return 0; -} - -void AT91F_SelectMMC(void) { - AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */ - AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */ - /* Set Output */ - AT91C_BASE_PIOB->PIO_SODR = CONFIG_SYS_DATAFLASH_MMC_PIO; -} - -void AT91F_SelectSPI(void) { - AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */ - AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */ - /* Clear Output */ - AT91C_BASE_PIOB->PIO_CODR = CONFIG_SYS_DATAFLASH_MMC_PIO; -} diff --git a/board/atmel/at91rm9200dk/partition.c b/board/atmel/at91rm9200dk/partition.c deleted file mode 100644 index c739b116bf..0000000000 --- a/board/atmel/at91rm9200dk/partition.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * (C) Copyright 2008 - * Ulf Samuelsson <ulf@atmel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ -#include <common.h> -#include <config.h> -#include <asm/hardware.h> -#include <dataflash.h> - -AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS]; - -struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = { - {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ - {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3} -}; - -/*define the area offsets*/ -dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, - {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, - {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, - {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, - {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, -}; diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c index f92b20f4a8..24a86063bf 100644 --- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c @@ -23,17 +23,14 @@ */ #include <common.h> -#include <asm/sizes.h> -#include <asm/arch/at91sam9g45.h> -#include <asm/arch/at91sam9_matrix.h> +#include <asm/io.h> +#include <asm/arch/at91sam9g45_matrix.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> -#include <asm/arch/clk.h> #include <asm/arch/gpio.h> -#include <asm/arch/io.h> -#include <asm/arch/hardware.h> +#include <asm/arch/clk.h> #include <lcd.h> #include <atmel_lcdc.h> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) @@ -49,35 +46,38 @@ DECLARE_GLOBAL_DATA_PTR; */ #ifdef CONFIG_CMD_NAND -static void at91sam9m10g45ek_nand_hw_init(void) +void at91sam9m10g45ek_nand_hw_init(void) { + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; unsigned long csa; /* Enable CS3 */ - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, - csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); + csa = readl(&matrix->ebicsa); + csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA; + writel(csa, &matrix->ebicsa); /* Configure SMC CS3 for NAND/SmartMedia */ - at91_sys_write(AT91_SMC_SETUP(3), - AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); - at91_sys_write(AT91_SMC_PULSE(3), - AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) | - AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(2)); - at91_sys_write(AT91_SMC_CYCLE(3), - AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(4)); - at91_sys_write(AT91_SMC_MODE(3), - AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE | + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) | + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(2), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(4), + &smc->cs[3].cycle); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | #ifdef CONFIG_SYS_NAND_DBW_16 - AT91_SMC_DBW_16 | + AT91_SMC_MODE_DBW_16 | #else /* CONFIG_SYS_NAND_DBW_8 */ - AT91_SMC_DBW_8 | + AT91_SMC_MODE_DBW_8 | #endif - AT91_SMC_TDF_(3)); + AT91_SMC_MODE_TDF_CYCLE(3), + &smc->cs[3].mode); - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIOC); + writel(1 << ATMEL_ID_PIOC, &pmc->pcer); /* Configure RDY/BSY */ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); @@ -90,7 +90,9 @@ static void at91sam9m10g45ek_nand_hw_init(void) #ifdef CONFIG_CMD_USB static void at91sam9m10g45ek_usb_hw_init(void) { - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE); + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + writel(1 << ATMEL_ID_PIODE, &pmc->pcer); at91_set_gpio_output(AT91_PIN_PD1, 0); at91_set_gpio_output(AT91_PIN_PD3, 0); @@ -100,47 +102,50 @@ static void at91sam9m10g45ek_usb_hw_init(void) #ifdef CONFIG_MACB static void at91sam9m10g45ek_macb_hw_init(void) { - unsigned long rstc; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; + struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC; + unsigned long erstl; /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_EMAC); + writel(1 << ATMEL_ID_EMAC, &pmc->pcer); /* * Disable pull-up on: - * RXDV (PA15) => PHY normal mode (not Test mode) - * ERX0 (PA12) => PHY ADDR0 - * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0 + * RXDV (PA15) => PHY normal mode (not Test mode) + * ERX0 (PA12) => PHY ADDR0 + * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0 * * PHY has internal pull-down */ writel(pin_to_mask(AT91_PIN_PA15) | pin_to_mask(AT91_PIN_PA12) | pin_to_mask(AT91_PIN_PA13), - pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); + &pioa->pudr); - rstc = at91_sys_read(AT91_RSTC_MR); + erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; /* Need to reset PHY -> 500ms reset */ - at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | - (AT91_RSTC_ERSTL & (0x0D << 8)) | - AT91_RSTC_URSTEN); + writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) | + AT91_RSTC_MR_URSTEN, &rstc->mr); - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); + writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); /* Wait for end hardware reset */ - while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); + while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) + ; /* Restore NRST value */ - at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | - (rstc) | - AT91_RSTC_URSTEN); + writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, + &rstc->mr); /* Re-enable pull-up */ writel(pin_to_mask(AT91_PIN_PA15) | pin_to_mask(AT91_PIN_PA12) | pin_to_mask(AT91_PIN_PA13), - pin_to_controller(AT91_PIN_PA0) + PIO_PUER); + &pioa->puer); + /* And the pins. */ at91_macb_hw_init(); } #endif @@ -161,7 +166,7 @@ vidinfo_t panel_info = { vl_vsync_len: 1, vl_upper_margin:40, vl_lower_margin:1, - mmio: AT91SAM9G45_LCDC_BASE, + mmio : ATMEL_BASE_LCDC, }; @@ -177,6 +182,8 @@ void lcd_disable(void) static void at91sam9m10g45ek_lcd_hw_init(void) { + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */ at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */ at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */ @@ -208,7 +215,7 @@ static void at91sam9m10g45ek_lcd_hw_init(void) at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */ at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_LCDC); + writel(1 << ATMEL_ID_LCDC, &pmc->pcer); gd->fb_base = CONFIG_AT91SAM9G45_LCD_BASE; } @@ -227,7 +234,7 @@ void lcd_show_board_info(void) lcd_printf ("(C) 2008 ATMEL Corp\n"); lcd_printf ("at91support@atmel.com\n"); lcd_printf ("%s CPU at %s MHz\n", - CONFIG_SYS_AT91_CPU_NAME, + ATMEL_CPU_NAME, strmhz(temp, get_cpu_clk_rate())); dram_size = 0; @@ -243,6 +250,12 @@ void lcd_show_board_info(void) #endif /* CONFIG_LCD_INFO */ #endif +int board_early_init_f(void) +{ + at91_seriald_hw_init(); + return 0; +} + int board_init(void) { /* Enable Ctrlc */ @@ -254,10 +267,10 @@ int board_init(void) #elif defined CONFIG_AT91SAM9G45EKES gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G45EKES; #endif + /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - at91_serial_hw_init(); #ifdef CONFIG_CMD_NAND at91sam9m10g45ek_nand_hw_init(); #endif @@ -270,11 +283,9 @@ int board_init(void) #ifdef CONFIG_ATMEL_SPI at91_spi0_hw_init(1 << 4); #endif - #ifdef CONFIG_MACB at91sam9m10g45ek_macb_hw_init(); #endif - #ifdef CONFIG_LCD at91sam9m10g45ek_lcd_hw_init(); #endif @@ -283,8 +294,8 @@ int board_init(void) int dram_init(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); return 0; } @@ -298,7 +309,7 @@ int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)AT91SAM9G45_BASE_EMAC, 0x00); + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00); #endif return rc; } diff --git a/board/atmel/at91sam9m10g45ek/led.c b/board/atmel/at91sam9m10g45ek/led.c index ff59a2d5d3..dadbd6a761 100644 --- a/board/atmel/at91sam9m10g45ek/led.c +++ b/board/atmel/at91sam9m10g45ek/led.c @@ -23,15 +23,17 @@ */ #include <common.h> +#include <asm/io.h> #include <asm/arch/at91sam9g45.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/gpio.h> -#include <asm/arch/io.h> void coloured_LED_init(void) { + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE); + writel(1 << ATMEL_ID_PIODE, &pmc->pcer); at91_set_gpio_output(CONFIG_RED_LED, 1); at91_set_gpio_output(CONFIG_GREEN_LED, 1); diff --git a/board/calao/sbc35_a9g20/sbc35_a9g20.c b/board/calao/sbc35_a9g20/sbc35_a9g20.c index 9df45c0ea3..5f448d9f50 100644 --- a/board/calao/sbc35_a9g20/sbc35_a9g20.c +++ b/board/calao/sbc35_a9g20/sbc35_a9g20.c @@ -26,15 +26,14 @@ */ #include <common.h> -#include <asm/arch/at91sam9260.h> +#include <asm/io.h> #include <asm/arch/at91sam9260_matrix.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> #include <asm/arch/gpio.h> -#include <asm/arch/io.h> -#include <asm/arch/hardware.h> + #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include <net.h> #endif @@ -50,33 +49,36 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_CMD_NAND static void sbc35_a9g20_nand_hw_init(void) { + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; unsigned long csa; /* Enable CS3 */ - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, - csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + csa = readl(&matrix->ebicsa); + csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA; + writel(csa, &matrix->ebicsa); /* Configure SMC CS3 for NAND/SmartMedia */ - at91_sys_write(AT91_SMC_SETUP(3), - AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); - at91_sys_write(AT91_SMC_PULSE(3), - AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | - AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); - at91_sys_write(AT91_SMC_CYCLE(3), - AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); - at91_sys_write(AT91_SMC_MODE(3), - AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE | + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), + &smc->cs[3].cycle); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | #ifdef CONFIG_SYS_NAND_DBW_16 - AT91_SMC_DBW_16 | + AT91_SMC_MODE_DBW_16 | #else /* CONFIG_SYS_NAND_DBW_8 */ - AT91_SMC_DBW_8 | + AT91_SMC_MODE_DBW_8 | #endif - AT91_SMC_TDF_(2)); + AT91_SMC_MODE_TDF_CYCLE(2), + &smc->cs[3].mode); - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); + writel(1 << ATMEL_ID_PIOC, &pmc->pcer); /* Configure RDY/BSY */ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); @@ -89,10 +91,13 @@ static void sbc35_a9g20_nand_hw_init(void) #ifdef CONFIG_MACB static void sbc35_a9g20_macb_hw_init(void) { - unsigned long rstc; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; + struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC; + unsigned long erstl; - /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC); + /* Enable EMAC clock */ + writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); /* * Disable pull-up on: @@ -111,24 +116,23 @@ static void sbc35_a9g20_macb_hw_init(void) pin_to_mask(AT91_PIN_PA25) | pin_to_mask(AT91_PIN_PA26) | pin_to_mask(AT91_PIN_PA28), - pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); + &pioa->pudr); - rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL; + erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; /* Need to reset PHY -> 500ms reset */ - at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | - (AT91_RSTC_ERSTL & (0x0D << 8)) | - AT91_RSTC_URSTEN); + writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) | + AT91_RSTC_MR_URSTEN, &rstc->mr); - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); + writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); /* Wait for end hardware reset */ - while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); + while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) + ; /* Restore NRST value */ - at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | - (rstc) | - AT91_RSTC_URSTEN); + writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, + &rstc->mr); /* Re-enable pull-up */ writel(pin_to_mask(AT91_PIN_PA14) | @@ -137,7 +141,7 @@ static void sbc35_a9g20_macb_hw_init(void) pin_to_mask(AT91_PIN_PA25) | pin_to_mask(AT91_PIN_PA26) | pin_to_mask(AT91_PIN_PA28), - pin_to_controller(AT91_PIN_PA0) + PIO_PUER); + &pioa->puer); at91_macb_hw_init(); } @@ -150,9 +154,9 @@ int board_init(void) gd->bd->bi_arch_number = MACH_TYPE_SBC35_A9G20; /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - at91_serial_hw_init(); + at91_seriald_hw_init(); sbc35_a9g20_nand_hw_init(); #ifdef CONFIG_ATMEL_SPI at91_spi0_hw_init(1 << 4 | 1 << 5); @@ -166,11 +170,9 @@ int board_init(void) int dram_init(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM; - if(get_ram_size((long *) PHYS_SDRAM, PHYS_SDRAM_SIZE) != PHYS_SDRAM_SIZE) - return -1; - - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + gd->ram_size = get_ram_size( + (void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); return 0; } @@ -184,7 +186,7 @@ int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00); + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00); #endif return rc; } diff --git a/board/calao/tny_a9260/tny_a9260.c b/board/calao/tny_a9260/tny_a9260.c index d51ca150cc..ab51a335a0 100644 --- a/board/calao/tny_a9260/tny_a9260.c +++ b/board/calao/tny_a9260/tny_a9260.c @@ -26,14 +26,12 @@ */ #include <common.h> -#include <asm/arch/at91sam9260.h> #include <asm/arch/at91sam9_matrix.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> #include <asm/arch/gpio.h> -#include <asm/arch/io.h> #include <asm/arch/hardware.h> DECLARE_GLOBAL_DATA_PTR; @@ -45,33 +43,36 @@ DECLARE_GLOBAL_DATA_PTR; static void tny_a9260_nand_hw_init(void) { + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; unsigned long csa; - /* Enable CS3 */ - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, - csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + /* Assign CS3 to NAND/SmartMedia Interface */ + csa = readl(&matrix->ebicsa); + csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA; + writel(csa, &matrix->ebicsa); /* Configure SMC CS3 for NAND/SmartMedia */ - at91_sys_write(AT91_SMC_SETUP(3), - AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); - at91_sys_write(AT91_SMC_PULSE(3), - AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | - AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); - at91_sys_write(AT91_SMC_CYCLE(3), - AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); - at91_sys_write(AT91_SMC_MODE(3), - AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE | + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), + &smc->cs[3].cycle); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | #ifdef CONFIG_SYS_NAND_DBW_16 - AT91_SMC_DBW_16 | + AT91_SMC_MODE_DBW_16 | #else /* CONFIG_SYS_NAND_DBW_8 */ - AT91_SMC_DBW_8 | + AT91_SMC_MODE_DBW_8 | #endif - AT91_SMC_TDF_(2)); + AT91_SMC_MODE_TDF_CYCLE(2), + &smc->cs[3].mode); - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); + writel(1 << ATMEL_ID_PIOC, &pmc->pcer); /* Configure RDY/BSY */ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); @@ -91,9 +92,9 @@ int board_init(void) gd->bd->bi_arch_number = MACH_TYPE_TNY_A9G20; #endif /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - at91_serial_hw_init(); + at91_seriald_hw_init(); tny_a9260_nand_hw_init(); at91_spi0_hw_init(1 << 5); return 0; @@ -101,10 +102,8 @@ int board_init(void) int dram_init(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM; - if(get_ram_size((long *) PHYS_SDRAM, PHYS_SDRAM_SIZE) != PHYS_SDRAM_SIZE) - return -1; - - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + gd->ram_size = get_ram_size( + (void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); return 0; } diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c index f82111bac2..420cd70dee 100644 --- a/board/cm_t35/cm_t35.c +++ b/board/cm_t35/cm_t35.c @@ -313,6 +313,14 @@ void set_muxconf_regs(void) cm_t3730_set_muxconf(); } +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0); + return 0; +} +#endif + /* * Routine: setup_net_chip_gmpc * Description: Setting up the configuration GPMC registers specific to the diff --git a/board/cmc_pu2/Makefile b/board/cmc_pu2/Makefile deleted file mode 100644 index a60f2e9612..0000000000 --- a/board/cmc_pu2/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := cmc_pu2.o flash.o load_sernum_ethaddr.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/cmc_pu2/cmc_pu2.c b/board/cmc_pu2/cmc_pu2.c deleted file mode 100644 index 0ac851c97f..0000000000 --- a/board/cmc_pu2/cmc_pu2.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * Modified for CMC_PU2 (removed Smart Media support) by Gary Jennejohn - * (2004) garyj@denx.de - * - * Modified for CMC_BASIC by Martin Krause (2005), TQ-Systems GmbH - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/mach-types.h> -#include <asm/arch/AT91RM9200.h> -#include <asm/io.h> -#include <netdev.h> -#if defined(CONFIG_DRIVER_ETHER) -#include <at91rm9200_net.h> -#include <dm9161.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ -/* - * Miscelaneous platform dependent initialisations - */ -#define CMC_HP_BASIC 1 -#define CMC_PU2 2 -#define CMC_BASIC 4 - -int hw_detect (void); - -int board_init (void) -{ - AT91PS_PIO piob = AT91C_BASE_PIOB; - AT91PS_PIO pioc = AT91C_BASE_PIOC; - - /* Enable Ctrlc */ - console_init_f (); - - /* Correct IRDA resistor problem */ - /* Set PA23_TXD in Output */ - /* (AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2; */ - - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - /* PIOB and PIOC clock enabling */ - *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB; - *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC; - - /* - * configure PC0-PC3 as input without pull ups, so RS485 driver enable - * (CMC-PU2) and digital outputs (CMC-BASIC) are deactivated. - */ - pioc->PIO_ODR = AT91C_PIO_PC0 | AT91C_PIO_PC1 | - AT91C_PIO_PC2 | AT91C_PIO_PC3; - pioc->PIO_PPUDR = AT91C_PIO_PC0 | AT91C_PIO_PC1 | - AT91C_PIO_PC2 | AT91C_PIO_PC3; - pioc->PIO_PER = AT91C_PIO_PC0 | AT91C_PIO_PC1 | - AT91C_PIO_PC2 | AT91C_PIO_PC3; - - /* - * On CMC-PU2 board configure PB3-PB6 to input without pull ups to - * clear the duo LEDs (the external pull downs assure a proper - * signal). On CMC-BASIC and CMC-HP-BASIC set PB3-PB6 to output and - * drive it high, to configure current measurement on AINx. - */ - if (hw_detect() & CMC_PU2) { - piob->PIO_ODR = AT91C_PIO_PB3 | AT91C_PIO_PB4 | - AT91C_PIO_PB5 | AT91C_PIO_PB6; - } - else if ((hw_detect() & CMC_BASIC) || (hw_detect() & CMC_HP_BASIC)) { - piob->PIO_SODR = AT91C_PIO_PB3 | AT91C_PIO_PB4 | - AT91C_PIO_PB5 | AT91C_PIO_PB6; - piob->PIO_OER = AT91C_PIO_PB3 | AT91C_PIO_PB4 | - AT91C_PIO_PB5 | AT91C_PIO_PB6; - } - piob->PIO_PPUDR = AT91C_PIO_PB3 | AT91C_PIO_PB4 | - AT91C_PIO_PB5 | AT91C_PIO_PB6; - piob->PIO_PER = AT91C_PIO_PB3 | AT91C_PIO_PB4 | - AT91C_PIO_PB5 | AT91C_PIO_PB6; - - /* - * arch number of CMC_PU2-Board. MACH_TYPE_CMC_PU2 is not supported in - * the linuxarm kernel, yet. - */ - /* gd->bd->bi_arch_number = MACH_TYPE_CMC_PU2; */ - gd->bd->bi_arch_number = 251; - /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; - return 0; -} - -int checkboard (void) -{ - if (hw_detect() & CMC_PU2) - puts ("Board: CMC-PU2 (Rittal GmbH)\n"); - else if (hw_detect() & CMC_BASIC) - puts ("Board: CMC-BASIC (Rittal GmbH)\n"); - else if (hw_detect() & CMC_HP_BASIC) - puts ("Board: CMC-HP-BASIC (Rittal GmbH)\n"); - else - puts ("Board: unknown\n"); - return 0; -} - -int hw_detect (void) -{ - AT91PS_PIO pio = AT91C_BASE_PIOB; - - /* PIOB clock enabling */ - *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB; - - /* configure PB12 as input without pull up */ - pio->PIO_ODR = AT91C_PIO_PB12; - pio->PIO_PPUDR = AT91C_PIO_PB12; - pio->PIO_PER = AT91C_PIO_PB12; - - /* configure PB13 as input without pull up */ - pio->PIO_ODR = AT91C_PIO_PB13; - pio->PIO_PPUDR = AT91C_PIO_PB13; - pio->PIO_PER = AT91C_PIO_PB13; - - /* read board identification pin */ - if (pio->PIO_PDSR & AT91C_PIO_PB12) - return ((pio->PIO_PDSR & AT91C_PIO_PB13) - ? CMC_PU2 : 0); - else - return ((pio->PIO_PDSR & AT91C_PIO_PB13) - ? CMC_HP_BASIC : CMC_BASIC); -} - -#ifdef CONFIG_DRIVER_ETHER -#if defined(CONFIG_CMD_NET) - -/* - * Name: - * at91rm9200_GetPhyInterface - * Description: - * Initialise the interface functions to the PHY - * Arguments: - * None - * Return value: - * None - */ -void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops) -{ - p_phyops->Init = dm9161_InitPhy; - p_phyops->IsPhyConnected = dm9161_IsPhyConnected; - p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed; - p_phyops->AutoNegotiate = dm9161_AutoNegotiate; -} - -#endif -#endif /* CONFIG_DRIVER_ETHER */ - -#ifdef CONFIG_DRIVER_AT91EMAC -int board_eth_init(bd_t *bis) -{ - int rc = 0; - rc = at91emac_register(bis, 0); - return rc; -} -#endif diff --git a/board/cmc_pu2/config.mk b/board/cmc_pu2/config.mk deleted file mode 100644 index cdb8a5f571..0000000000 --- a/board/cmc_pu2/config.mk +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x20F00000 -## For testing: load at 0x20100000 and "go" at 0x201000A4 -#CONFIG_SYS_TEXT_BASE = 0x20100000 diff --git a/board/cmc_pu2/flash.c b/board/cmc_pu2/flash.c deleted file mode 100644 index d10faab52a..0000000000 --- a/board/cmc_pu2/flash.c +++ /dev/null @@ -1,469 +0,0 @@ -/* - * (C) Copyright 2003-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 - * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de - * - * Modified for the CMC PU2 by (C) Copyright 2004 Gary Jennejohn - * garyj@denx.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -#ifndef CONFIG_ENV_ADDR -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -#endif - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -#define FLASH_CYCLE1 0x0555 -#define FLASH_CYCLE2 0x02AA - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_short *addr, flash_info_t *info); -static void flash_reset(flash_info_t *info); -static int write_word_amd(flash_info_t *info, vu_short *dest, ushort data); -static flash_info_t *flash_get_info(ulong base); - -/*----------------------------------------------------------------------- - * flash_init() - * - * sets up flash_info and returns size of FLASH (bytes) - */ -unsigned long flash_init (void) -{ - unsigned long size = 0; - ulong flashbase = CONFIG_SYS_FLASH_BASE; - - /* Init: no FLASHes known */ - memset(&flash_info[0], 0, sizeof(flash_info_t)); - - flash_info[0].size = flash_get_size((vu_short *)flashbase, &flash_info[0]); - - size = flash_info[0].size; - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - flash_get_info(CONFIG_SYS_MONITOR_BASE)); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1, - flash_get_info(CONFIG_ENV_ADDR)); -#endif - - return size ? size : 1; -} - -/*----------------------------------------------------------------------- - */ -static void flash_reset(flash_info_t *info) -{ - vu_short *base = (vu_short *)(info->start[0]); - - /* Put FLASH back in read mode */ - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) - *base = 0x00FF; /* Intel Read Mode */ - else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) - *base = 0x00F0; /* AMD Read Mode */ -} - -/*----------------------------------------------------------------------- - */ - -static flash_info_t *flash_get_info(ulong base) -{ - int i; - flash_info_t * info; - - info = NULL; - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) { - info = & flash_info[i]; - if (info->size && info->start[0] <= base && - base <= info->start[0] + info->size - 1) - break; - } - - return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info; -} - -/*----------------------------------------------------------------------- - */ - -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - case FLASH_MAN_SST: printf ("SST "); break; - case FLASH_MAN_STM: printf ("STM "); break; - case FLASH_MAN_INTEL: printf ("INTEL "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_S29GL064M: - printf ("S29GL064M-R6 (64Mbit, uniform sector size)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, - info->sector_count); - - printf (" Sector Start Addresses:"); - - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -ulong flash_get_size (vu_short *addr, flash_info_t *info) -{ - int i; - ushort value; - ulong base = (ulong)addr; - - /* Write auto select command sequence */ - addr[FLASH_CYCLE1] = 0x00AA; /* for AMD, Intel ignores this */ - addr[FLASH_CYCLE2] = 0x0055; /* for AMD, Intel ignores this */ - addr[FLASH_CYCLE1] = 0x0090; /* selects Intel or AMD */ - - /* read Manufacturer ID */ - udelay(100); - value = addr[0]; - debug ("Manufacturer ID: %04X\n", value); - - switch (value) { - - case (AMD_MANUFACT & 0xFFFF): - debug ("Manufacturer: AMD (Spansion)\n"); - info->flash_id = FLASH_MAN_AMD; - break; - - case (INTEL_MANUFACT & 0xFFFF): - debug ("Manufacturer: Intel (not supported yet)\n"); - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - printf ("Unknown Manufacturer ID: %04X\n", value); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - goto out; - } - - value = addr[1]; - debug ("Device ID: %04X\n", value); - - switch (addr[1]) { - - case (AMD_ID_MIRROR & 0xFFFF): - debug ("Mirror Bit flash: addr[14] = %08X addr[15] = %08X\n", - addr[14], addr[15]); - - switch(addr[14]) { - case (AMD_ID_GL064M_2 & 0xFFFF): - if (addr[15] != (AMD_ID_GL064M_3 & 0xffff)) { - printf ("Chip: S29GLxxxM -> unknown\n"); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - } else { - debug ("Chip: S29GL064M-R6\n"); - info->flash_id += FLASH_S29GL064M; - info->sector_count = 128; - info->size = 0x00800000; - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base; - base += 0x10000; - } - } - break; /* => 16 MB */ - default: - printf ("Chip: *** unknown ***\n"); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - break; - } - break; - - default: - printf ("Unknown Device ID: %04X\n", value); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - break; - } - -out: - /* Put FLASH back in read mode */ - flash_reset(info); - - return (info->size); -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_short *addr = (vu_short *)(info->start[0]); - int flag, prot, sect, ssect, l_sect; - ulong now, last, start; - - debug ("flash_erase: first: %d last: %d\n", s_first, s_last); - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* - * Start erase on unprotected sectors. - * Since the flash can erase multiple sectors with one command - * we take advantage of that by doing the erase in chunks of - * 3 sectors. - */ - for (sect = s_first; sect <= s_last; ) { - l_sect = -1; - - addr[FLASH_CYCLE1] = 0x00AA; - addr[FLASH_CYCLE2] = 0x0055; - addr[FLASH_CYCLE1] = 0x0080; - addr[FLASH_CYCLE1] = 0x00AA; - addr[FLASH_CYCLE2] = 0x0055; - - /* do the erase in chunks of at most 3 sectors */ - for (ssect = 0; ssect < 3; ssect++) { - if ((sect + ssect) > s_last) - break; - if (info->protect[sect + ssect] == 0) { /* not protected */ - addr = (vu_short *)(info->start[sect + ssect]); - addr[0] = 0x0030; - l_sect = sect + ssect; - } - } - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer(0); - last = 0; - addr = (vu_short *)(info->start[l_sect]); - while ((addr[0] & 0x0080) != 0x0080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - addr = (vu_short *)info->start[0]; - addr[0] = 0x00F0; /* reset bank */ - sect += ssect; - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - -DONE: - /* reset to read mode */ - addr = (vu_short *)info->start[0]; - addr[0] = 0x00F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong wp, data; - int rc; - - if (addr & 1) { - printf ("unaligned destination not supported\n"); - return ERR_ALIGN; - }; - - if ((int) src & 1) { - printf ("unaligned source not supported\n"); - return ERR_ALIGN; - }; - - wp = addr; - - while (cnt >= 2) { - data = *((vu_short *)src); - if ((rc = write_word_amd(info, (vu_short *)wp, data)) != 0) { -printf ("write_buff 1: write_word_amd() rc=%d\n", rc); - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 0) { - return (ERR_OK); - } - - if (cnt == 1) { - data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) << 8); - if ((rc = write_word_amd(info, (vu_short *)wp, data)) != 0) { -printf ("write_buff 1: write_word_amd() rc=%d\n", rc); - return (rc); - } - src += 1; - wp += 1; - cnt -= 1; - } - - return ERR_OK; -} - -/*----------------------------------------------------------------------- - * Write a word to Flash for AMD FLASH - * A word is 16 or 32 bits, whichever the bus width of the flash bank - * (not an individual chip) is. - * - * returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word_amd (flash_info_t *info, vu_short *dest, ushort data) -{ - int flag; - vu_short *base; /* first address in flash bank */ - ulong start; - - /* Check if Flash is (sufficiently) erased */ - if ((*dest & data) != data) { - return (2); - } - - base = (vu_short *)(info->start[0]); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - base[FLASH_CYCLE1] = 0x00AA; /* unlock */ - base[FLASH_CYCLE2] = 0x0055; /* unlock */ - base[FLASH_CYCLE1] = 0x00A0; /* selects program mode */ - - *dest = data; /* start programming the data */ - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer(0); - - /* data polling for D7 */ - while ((*dest & 0x0080) != (data & 0x0080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *dest = 0x00F0; /* reset bank */ - return (1); - } - } - return (0); -} diff --git a/board/cmc_pu2/load_sernum_ethaddr.c b/board/cmc_pu2/load_sernum_ethaddr.c deleted file mode 100644 index 6f85dd95b3..0000000000 --- a/board/cmc_pu2/load_sernum_ethaddr.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * (C) Copyright 2000, 2001, 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2005 - * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* #define DEBUG */ - -#include <common.h> -#include <net.h> - -#define I2C_CHIP 0x50 /* I2C bus address of onboard EEPROM */ -#define I2C_ALEN 1 /* length of EEPROM addresses in bytes */ -#define I2C_OFFSET 0x0 /* start address of manufacturere data block - * in EEPROM */ - -/* 64 Byte manufacturer data block in EEPROM */ -struct manufacturer_data { - unsigned int serial_number; /* serial number (0...999999) */ - unsigned short hardware; /* hardware version (e.g. V1.02) */ - unsigned short manuf_date; /* manufacture date (e.g. 25/02) */ - unsigned char name[20]; /* device name (in CHIP.INI) */ - unsigned char macadr[6]; /* MAC address */ - signed char a_kal[4]; /* calibration value for U */ - signed char i_kal[4]; /* calibration value for I */ - unsigned char reserve[18]; /* reserved */ - unsigned short save_nr; /* save count */ - unsigned short chksum; /* checksum */ -}; - - -int i2c_read (unsigned char chip, unsigned int addr, int alen, - unsigned char *buffer, int len); - -/*----------------------------------------------------------------------- - * Process manufacturer data block in EEPROM: - * - * If we boot on a system fresh from factory, check if the manufacturer data - * in the EEPROM is valid and save some information it contains. - * - * CMC manufacturer data is defined as follows: - * - * - located in the onboard EEPROM - * - starts at offset 0x0 - * - size 0x00000040 - * - * Internal structure: see struct definition - */ - -int misc_init_r(void) -{ - struct manufacturer_data data; - char serial [9]; - unsigned short chksum; - unsigned char *p; - unsigned short i; - -#if !defined(CONFIG_HARD_I2C) && !defined(CONFIG_SOFT_I2C) -#error you must define some I2C support (CONFIG_HARD_I2C or CONFIG_SOFT_I2C) -#endif - if (i2c_read(I2C_CHIP, I2C_OFFSET, I2C_ALEN, (unsigned char *)&data, - sizeof(data)) != 0) { - puts ("Error reading manufacturer data from EEPROM\n"); - return -1; - } - - /* check if manufacturer data block is valid */ - p = (unsigned char *)&data; - chksum = 0; - for (i = 0; i < (sizeof(data) - sizeof(data.chksum)); i++) - chksum += *p++; - - debug ("checksum of manufacturer data block: %#.4x\n", chksum); - - if (chksum != data.chksum) { - puts ("Error: manufacturer data block has invalid checksum\n"); - return -1; - } - - /* copy serial number */ - sprintf (serial, "%d", data.serial_number); - - /* set serial# and ethaddr if not yet defined */ - if (getenv("serial#") == NULL) { - setenv ("serial#", serial); - } - - if (getenv("ethaddr") == NULL) { - eth_setenv_enetaddr("ethaddr", data.macadr); - } - - return 0; -} diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c index 0062f120d7..a7071cd554 100644 --- a/board/comelit/dig297/dig297.c +++ b/board/comelit/dig297/dig297.c @@ -37,6 +37,7 @@ #include <netdev.h> #include <twl4030.h> #include <asm/io.h> +#include <asm/arch/mmc_host_def.h> #include <asm/arch/omap3-regs.h> #include <asm/arch/mux.h> #include <asm/arch/mem.h> @@ -145,6 +146,14 @@ void set_muxconf_regs(void) MUX_DIG297(); } +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0); + return 0; +} +#endif + #ifdef CONFIG_CMD_NET /* * Routine: setup_net_chip diff --git a/board/csb637/Makefile b/board/csb637/Makefile deleted file mode 100644 index a5484ae35d..0000000000 --- a/board/csb637/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := csb637.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/csb637/config.mk b/board/csb637/config.mk deleted file mode 100644 index e2cc8a6eea..0000000000 --- a/board/csb637/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x23fc0000 diff --git a/board/csb637/csb637.c b/board/csb637/csb637.c deleted file mode 100644 index d7fdcc4f73..0000000000 --- a/board/csb637/csb637.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * (C) Copyright 2005 REA Elektronik GmbH <www.rea.de> - * Anders Larsen <alarsen@rea.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/AT91RM9200.h> -#include <netdev.h> -#include <asm/io.h> -#if defined(CONFIG_DRIVER_ETHER) -#include <at91rm9200_net.h> -#include <bcm5221.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* Enable Ctrlc */ - console_init_f (); - - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - /* arch number of CSB637-Board */ - gd->bd->bi_arch_number = MACH_TYPE_CSB637; - /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; - return 0; -} - -#ifdef CONFIG_DRIVER_ETHER -#if defined(CONFIG_CMD_NET) - -/* - * Name: - * at91rm9200_GetPhyInterface - * Description: - * Initialise the interface functions to the PHY - * Arguments: - * None - * Return value: - * None - */ -void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops) -{ - p_phyops->Init = bcm5221_InitPhy; - p_phyops->IsPhyConnected = bcm5221_IsPhyConnected; - p_phyops->GetLinkSpeed = bcm5221_GetLinkSpeed; - p_phyops->AutoNegotiate = bcm5221_AutoNegotiate; -} - -#endif -#endif /* CONFIG_DRIVER_ETHER */ - -#ifdef CONFIG_DRIVER_AT91EMAC -int board_eth_init(bd_t *bis) -{ - int rc = 0; - rc = at91emac_register(bis, 0); - return rc; -} -#endif diff --git a/board/dave/B2/B2.c b/board/dave/B2/B2.c deleted file mode 100644 index 096ebbd16c..0000000000 --- a/board/dave/B2/B2.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * (C) Copyright 2004 - * DAVE Srl - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#include <asm/hardware.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialization - */ - -int board_init (void) -{ - u32 temp; - - /* Configuration Port Control Register*/ - /* Port A */ - PCONA = 0x3ff; - - /* Port B */ - PCONB = 0xff; - PDATB = 0xFFFF; - - /* Port C */ - /* - PCONC = 0xff55ff15; - PDATC = 0x0; - PUPC = 0xffff; - */ - - /* Port D */ - /* - PCOND = 0xaaaa; - PUPD = 0xff; - */ - - /* Port E */ - PCONE = 0x0001aaa9; - PDATE = 0x0; - PUPE = 0xff; - - /* Port F */ - PCONF = 0x124955; - PDATF = 0xff; /* B2-eth_reset tied high level */ - /* - PUPF = 0x1e3; - */ - - /* Port G */ - PUPG = 0x1; - PCONG = 0x3; /*PG0= EINT0= ETH_INT prepared for linux kernel*/ - - INTMSK = 0x03fffeff; - INTCON = 0x05; - - /* - Configure chip ethernet interrupt as High level - Port G EINT 0-7 EINT0 -> CHIP ETHERNET - */ - temp = EXTINT; - temp &= ~0x7; - temp |= 0x1; /*LEVEL_HIGH*/ - EXTINT = temp; - - /* - Reset SMSC LAN91C96 chip - */ - temp= PCONF; - temp |= 0x00000040; - PCONF = temp; - - /* Reset high */ - temp = PDATF; - temp |= (1 << 3); - PDATF = temp; - - /* Short delay */ - for (temp=0;temp<10;temp++) - { - /* NOP */ - } - - /* Reset low */ - temp = PDATF; - temp &= ~(1 << 3); - PDATF = temp; - - /* arch number MACH_TYPE_MBA44B0 */ - gd->bd->bi_arch_number = MACH_TYPE_S3C44B0; - - /* location of boot parameters */ - gd->bd->bi_boot_params = 0x0c000100; - - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return (0); -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_LAN91C96 - rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); -#endif - return rc; -} -#endif diff --git a/board/dave/B2/Makefile b/board/dave/B2/Makefile deleted file mode 100644 index b981579a8e..0000000000 --- a/board/dave/B2/Makefile +++ /dev/null @@ -1,55 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2002 -# Sysgo Real-Time Solutions, GmbH <www.elinos.com> -# Marius Groeger <mgroeger@sysgo.de> -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := B2.o flash.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/dave/B2/config.mk b/board/dave/B2/config.mk deleted file mode 100644 index f7b686a1eb..0000000000 --- a/board/dave/B2/config.mk +++ /dev/null @@ -1,30 +0,0 @@ -# -# (C) Copyright 2000 -# Sysgo Real-Time Solutions, GmbH <www.elinos.com> -# Marius Groeger <mgroeger@sysgo.de> -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -CONFIG_SYS_TEXT_BASE = 0x0C100000 - -PLATFORM_CPPFLAGS += -Uarm diff --git a/board/dave/B2/flash.c b/board/dave/B2/flash.c deleted file mode 100644 index bb892e6700..0000000000 --- a/board/dave/B2/flash.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * (C) Copyright 2001 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/hardware.h> - -/* - * include common flash code (for esd boards) - */ -#include "../common/flash.c" - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long * addr, flash_info_t * info); -static void flash_get_offsets (ulong base, flash_info_t * info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ -#ifdef __DEBUG_START_FROM_SRAM__ - return CONFIG_SYS_DUMMY_FLASH_SIZE; -#else - unsigned long size_b0; - int i; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0<<20); - } - - /* Setup offsets */ - flash_get_offsets (0, &flash_info[0]); - - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - -CONFIG_SYS_MONITOR_LEN, - 0xffffffff, - &flash_info[0]); - - flash_info[0].size = size_b0; - - return (size_b0); -#endif -} diff --git a/board/dave/B2/lowlevel_init.S b/board/dave/B2/lowlevel_init.S deleted file mode 100644 index 2f3a3645ed..0000000000 --- a/board/dave/B2/lowlevel_init.S +++ /dev/null @@ -1,167 +0,0 @@ -/* - * (C) Copyright 2004 - * DAVE Srl - * - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * memsetup-sa1110.S (blob): memory setup for various SA1110 architectures - * Modified By MATTO - * - * Copyright (C) 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -/* - * Documentation: - * Intel Corporation, "Intel StrongARM SA-1110 Microprocessor - * Advanced Developer's manual, December 1999 - * - * Intel has a very hard to find SDRAM configurator on their web site: - * http://appzone.intel.com/hcd/sa1110/memory/index.asp - * - * NOTE: This code assumes that an SA1110 CPU *always* uses SDRAM. This - * appears to be true, but it might be possible that somebody designs a - * board with mixed EDODRAM/SDRAM memory (which is a bad idea). -- Erik - * - * 04-10-2001: SELETZ - * - separated memory config for multiple platform support - * - perform SA1110 Hardware Reset Procedure - * - */ - -.equ B0_Tacs, 0x0 /* 0clk */ -.equ B0_Tcos, 0x0 /* 0clk */ -.equ B0_Tacc, 0x4 /* 6clk */ -.equ B0_Tcoh, 0x0 /* 0clk */ -.equ B0_Tah, 0x0 /* 0clk */ -.equ B0_Tacp, 0x0 /* 0clk */ -.equ B0_PMC, 0x0 /* normal(1data) */ -/* Bank 1 parameter */ -.equ B1_Tacs, 0x3 /* 4clk */ -.equ B1_Tcos, 0x3 /* 4clk */ -.equ B1_Tacc, 0x7 /* 14clkv */ -.equ B1_Tcoh, 0x3 /* 4clk */ -.equ B1_Tah, 0x3 /* 4clk */ -.equ B1_Tacp, 0x3 /* 6clk */ -.equ B1_PMC, 0x0 /* normal(1data) */ - -/* Bank 2 parameter - LAN91C96 */ -.equ B2_Tacs, 0x3 /* 4clk */ -.equ B2_Tcos, 0x3 /* 4clk */ -.equ B2_Tacc, 0x7 /* 14clk */ -.equ B2_Tcoh, 0x3 /* 4clk */ -.equ B2_Tah, 0x3 /* 4clk */ -.equ B2_Tacp, 0x3 /* 6clk */ -.equ B2_PMC, 0x0 /* normal(1data) */ - -/* Bank 3 parameter */ -.equ B3_Tacs, 0x3 /* 4clk */ -.equ B3_Tcos, 0x3 /* 4clk */ -.equ B3_Tacc, 0x7 /* 14clk */ -.equ B3_Tcoh, 0x3 /* 4clk */ -.equ B3_Tah, 0x3 /* 4clk */ -.equ B3_Tacp, 0x3 /* 6clk */ -.equ B3_PMC, 0x0 /* normal(1data) */ - -/* Bank 4 parameter */ -.equ B4_Tacs, 0x3 /* 4clk */ -.equ B4_Tcos, 0x3 /* 4clk */ -.equ B4_Tacc, 0x7 /* 14clk */ -.equ B4_Tcoh, 0x3 /* 4clk */ -.equ B4_Tah, 0x3 /* 4clk */ -.equ B4_Tacp, 0x3 /* 6clk */ -.equ B4_PMC, 0x0 /* normal(1data) */ - -/* Bank 5 parameter */ -.equ B5_Tacs, 0x3 /* 4clk */ -.equ B5_Tcos, 0x3 /* 4clk */ -.equ B5_Tacc, 0x7 /* 14clk */ -.equ B5_Tcoh, 0x3 /* 4clk */ -.equ B5_Tah, 0x3 /* 4clk */ -.equ B5_Tacp, 0x3 /* 6clk */ -.equ B5_PMC, 0x0 /* normal(1data) */ - -/* Bank 6(if SROM) parameter */ -.equ B6_Tacs, 0x3 /* 4clk */ -.equ B6_Tcos, 0x3 /* 4clk */ -.equ B6_Tacc, 0x7 /* 14clk */ -.equ B6_Tcoh, 0x3 /* 4clk */ -.equ B6_Tah, 0x3 /* 4clk */ -.equ B6_Tacp, 0x3 /* 6clk */ -.equ B6_PMC, 0x0 /* normal(1data) */ - -/* Bank 7(if SROM) parameter */ -.equ B7_Tacs, 0x3 /* 4clk */ -.equ B7_Tcos, 0x3 /* 4clk */ -.equ B7_Tacc, 0x7 /* 14clk */ -.equ B7_Tcoh, 0x3 /* 4clk */ -.equ B7_Tah, 0x3 /* 4clk */ -.equ B7_Tacp, 0x3 /* 6clk */ -.equ B7_PMC, 0x0 /* normal(1data) */ - -/* Bank 6 parameter */ -.equ B6_MT, 0x3 /* SDRAM */ -.equ B6_Trcd, 0x0 /* 2clk */ -.equ B6_SCAN, 0x0 /* 10bit */ - -.equ B7_MT, 0x3 /* SDRAM */ -.equ B7_Trcd, 0x0 /* 2clk */ -.equ B7_SCAN, 0x0 /* 10bit */ - - -/* REFRESH parameter */ -.equ REFEN, 0x1 /* Refresh enable */ -.equ TREFMD, 0x0 /* CBR(CAS before RAS)/Auto refresh */ -.equ Trp, 0x0 /* 2clk */ -.equ Trc, 0x3 /* 0x1=5clk 0x3=11clk*/ -.equ Tchr, 0x0 /* 0x2=3clk 0x0=0clks */ -.equ REFCNT, 879 - -MEMORY_CONFIG: - .long 0x12111900 /* Bank0 = OM[1:0] , Bank1-7 16bit, Bank2=Nowait,UB/LB*/ - .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /*GCS0*/ - .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /*GCS1*/ - .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /*GCS2*/ - .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /*GCS3*/ - .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /*GCS4*/ - .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /*GCS5*/ - .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /*GCS6*/ - .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /*GCS7*/ - .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) /*REFRESH RFEN=1, TREFMD=0, trp=3clk, trc=5clk, tchr=3clk,count=1019*/ - .word 0x17 /*SCLK power down mode, BANKSIZE 16M/16M*/ - .word 0x20 /*MRSR6 CL=2clk*/ - .word 0x20 /*MRSR7*/ - - -.globl lowlevel_init -lowlevel_init: - - /* - the next instruction fail due memory relocation... - we'll find the right MEMORY_CONFIG address with the next 3 lines... - */ - /*ldr r0, =MEMORY_CONFIG*/ - mov r0, pc - ldr r1, =(0x38+4) - sub r0, r0, r1 - - ldmia r0, {r1-r13} - ldr r0, =0x01c80000 - stmia r0, {r1-r13} - mov pc, lr diff --git a/board/davedenx/qong/fpga.c b/board/davedenx/qong/fpga.c index 789acf0696..6536a0b695 100644 --- a/board/davedenx/qong/fpga.c +++ b/board/davedenx/qong/fpga.c @@ -25,7 +25,7 @@ #include <common.h> #include <asm/arch/clock.h> #include <asm/arch/imx-regs.h> -#include <mxc_gpio.h> +#include <asm/gpio.h> #include <fpga.h> #include <lattice.h> #include "qong_fpga.h" @@ -41,22 +41,22 @@ static void qong_jtag_init(void) static void qong_fpga_jtag_set_tdi(int value) { - mxc_gpio_set(QONG_FPGA_TDI_PIN, value); + gpio_set_value(QONG_FPGA_TDI_PIN, value); } static void qong_fpga_jtag_set_tms(int value) { - mxc_gpio_set(QONG_FPGA_TMS_PIN, value); + gpio_set_value(QONG_FPGA_TMS_PIN, value); } static void qong_fpga_jtag_set_tck(int value) { - mxc_gpio_set(QONG_FPGA_TCK_PIN, value); + gpio_set_value(QONG_FPGA_TCK_PIN, value); } static int qong_fpga_jtag_get_tdo(void) { - return mxc_gpio_get(QONG_FPGA_TDO_PIN); + return gpio_get_value(QONG_FPGA_TDO_PIN); } lattice_board_specific_func qong_fpga_fns = { diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c index ec22627680..99432edabc 100644 --- a/board/davedenx/qong/qong.c +++ b/board/davedenx/qong/qong.c @@ -28,7 +28,7 @@ #include <asm/io.h> #include <nand.h> #include <fsl_pmic.h> -#include <mxc_gpio.h> +#include <asm/gpio.h> #include "qong_fpga.h" #include <watchdog.h> @@ -51,9 +51,9 @@ int dram_init (void) static void qong_fpga_reset(void) { - mxc_gpio_set(QONG_FPGA_RST_PIN, 0); + gpio_set_value(QONG_FPGA_RST_PIN, 0); udelay(30); - mxc_gpio_set(QONG_FPGA_RST_PIN, 1); + gpio_set_value(QONG_FPGA_RST_PIN, 1); udelay(300); } @@ -76,21 +76,20 @@ int board_early_init_f (void) /* FPGA reset Pin */ /* rstn = 0 */ - mxc_gpio_set(QONG_FPGA_RST_PIN, 0); - mxc_gpio_direction(QONG_FPGA_RST_PIN, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(QONG_FPGA_RST_PIN, 0); /* set interrupt pin as input */ - mxc_gpio_direction(QONG_FPGA_IRQ_PIN, MXC_GPIO_DIRECTION_IN); + gpio_direction_input(QONG_FPGA_IRQ_PIN); /* FPGA JTAG Interface */ mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SFS6, MUX_CTL_GPIO)); mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SCK6, MUX_CTL_GPIO)); mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CAPTURE, MUX_CTL_GPIO)); mx31_gpio_mux(IOMUX_MODE(MUX_CTL_COMPARE, MUX_CTL_GPIO)); - mxc_gpio_direction(QONG_FPGA_TCK_PIN, MXC_GPIO_DIRECTION_OUT); - mxc_gpio_direction(QONG_FPGA_TMS_PIN, MXC_GPIO_DIRECTION_OUT); - mxc_gpio_direction(QONG_FPGA_TDI_PIN, MXC_GPIO_DIRECTION_OUT); - mxc_gpio_direction(QONG_FPGA_TDO_PIN, MXC_GPIO_DIRECTION_IN); + gpio_direction_output(QONG_FPGA_TCK_PIN, 0); + gpio_direction_output(QONG_FPGA_TMS_PIN, 0); + gpio_direction_output(QONG_FPGA_TDI_PIN, 0); + gpio_direction_input(QONG_FPGA_TDO_PIN); #endif /* setup pins for UART1 */ @@ -263,27 +262,26 @@ static void board_nand_setup(void) qong_fpga_reset(); /* Enable NAND flash */ - mxc_gpio_set(15, 1); - mxc_gpio_set(14, 1); - mxc_gpio_direction(15, MXC_GPIO_DIRECTION_OUT); - mxc_gpio_direction(16, MXC_GPIO_DIRECTION_IN); - mxc_gpio_direction(14, MXC_GPIO_DIRECTION_IN); - mxc_gpio_set(15, 0); + gpio_set_value(15, 1); + gpio_set_value(14, 1); + gpio_direction_output(15, 0); + gpio_direction_input(16); + gpio_direction_input(14); } int qong_nand_rdy(void *chip) { udelay(1); - return mxc_gpio_get(16); + return gpio_get_value(16); } void qong_nand_select_chip(struct mtd_info *mtd, int chip) { if (chip >= 0) - mxc_gpio_set(15, 0); + gpio_set_value(15, 0); else - mxc_gpio_set(15, 1); + gpio_set_value(15, 1); } diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index 73eaa48b0b..2f950e7bdf 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -30,6 +30,7 @@ #include <asm/arch/emac_defs.h> #include <asm/io.h> #include <asm/arch/davinci_misc.h> +#include <hwconfig.h> DECLARE_GLOBAL_DATA_PTR; @@ -105,6 +106,57 @@ const struct pinmux_config nand_pins[] = { { pinmux(12), 1, 5 }, { pinmux(12), 1, 6 } }; +#elif defined(CONFIG_USE_NOR) +/* NOR pin muxer settings */ +const struct pinmux_config nor_pins[] = { + /* GP0[11] is required for NOR to work on Rev 3 EVMs */ + { pinmux(0), 8, 4 }, /* GP0[11] */ + { pinmux(5), 1, 6 }, + { pinmux(6), 1, 6 }, + { pinmux(7), 1, 0 }, + { pinmux(7), 1, 4 }, + { pinmux(7), 1, 5 }, + { pinmux(8), 1, 0 }, + { pinmux(8), 1, 1 }, + { pinmux(8), 1, 2 }, + { pinmux(8), 1, 3 }, + { pinmux(8), 1, 4 }, + { pinmux(8), 1, 5 }, + { pinmux(8), 1, 6 }, + { pinmux(8), 1, 7 }, + { pinmux(9), 1, 0 }, + { pinmux(9), 1, 1 }, + { pinmux(9), 1, 2 }, + { pinmux(9), 1, 3 }, + { pinmux(9), 1, 4 }, + { pinmux(9), 1, 5 }, + { pinmux(9), 1, 6 }, + { pinmux(9), 1, 7 }, + { pinmux(10), 1, 0 }, + { pinmux(10), 1, 1 }, + { pinmux(10), 1, 2 }, + { pinmux(10), 1, 3 }, + { pinmux(10), 1, 4 }, + { pinmux(10), 1, 5 }, + { pinmux(10), 1, 6 }, + { pinmux(10), 1, 7 }, + { pinmux(11), 1, 0 }, + { pinmux(11), 1, 1 }, + { pinmux(11), 1, 2 }, + { pinmux(11), 1, 3 }, + { pinmux(11), 1, 4 }, + { pinmux(11), 1, 5 }, + { pinmux(11), 1, 6 }, + { pinmux(11), 1, 7 }, + { pinmux(12), 1, 0 }, + { pinmux(12), 1, 1 }, + { pinmux(12), 1, 2 }, + { pinmux(12), 1, 3 }, + { pinmux(12), 1, 4 }, + { pinmux(12), 1, 5 }, + { pinmux(12), 1, 6 }, + { pinmux(12), 1, 7 } +}; #endif #ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII @@ -114,6 +166,64 @@ const struct pinmux_config nand_pins[] = { #endif #endif /* CONFIG_DRIVER_TI_EMAC */ +void dsp_lpsc_on(unsigned domain, unsigned int id) +{ + dv_reg_p mdstat, mdctl, ptstat, ptcmd; + struct davinci_psc_regs *psc_regs; + + psc_regs = davinci_psc0_regs; + mdstat = &psc_regs->psc0.mdstat[id]; + mdctl = &psc_regs->psc0.mdctl[id]; + ptstat = &psc_regs->ptstat; + ptcmd = &psc_regs->ptcmd; + + while (*ptstat & (0x1 << domain)) + ; + + if ((*mdstat & 0x1f) == 0x03) + return; /* Already on and enabled */ + + *mdctl |= 0x03; + + *ptcmd = 0x1 << domain; + + while (*ptstat & (0x1 << domain)) + ; + while ((*mdstat & 0x1f) != 0x03) + ; /* Probably an overkill... */ +} + +static void dspwake(void) +{ + unsigned *resetvect = (unsigned *)DAVINCI_L3CBARAM_BASE; + u32 val; + + /* if the device is ARM only, return */ + if ((readl(CHIP_REV_ID_REG) & 0x3f) == 0x10) + return; + + if (hwconfig_subarg_cmp_f("dsp", "wake", "no", NULL)) + return; + + *resetvect++ = 0x1E000; /* DSP Idle */ + /* clear out the next 10 words as NOP */ + memset(resetvect, 0, sizeof(unsigned) *10); + + /* setup the DSP reset vector */ + writel(DAVINCI_L3CBARAM_BASE, HOST1CFG); + + dsp_lpsc_on(1, DAVINCI_LPSC_GEM); + val = readl(PSC0_MDCTL + (15 * 4)); + val |= 0x100; + writel(val, (PSC0_MDCTL + (15 * 4))); +} + +int misc_init_r(void) +{ + dspwake(); + return 0; +} + static const struct pinmux_resource pinmuxes[] = { #ifdef CONFIG_SPI_FLASH PINMUX_ITEM(spi1_pins), @@ -122,6 +232,8 @@ static const struct pinmux_resource pinmuxes[] = { PINMUX_ITEM(i2c_pins), #ifdef CONFIG_NAND_DAVINCI PINMUX_ITEM(nand_pins), +#elif defined(CONFIG_USE_NOR) + PINMUX_ITEM(nor_pins), #endif }; @@ -168,6 +280,7 @@ u32 get_board_rev(void) int board_init(void) { + u32 val; #ifndef CONFIG_USE_IRQ irq_init(); #endif @@ -215,6 +328,16 @@ int board_init(void) if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes))) return 1; +#ifdef CONFIG_USE_NOR + /* Set the GPIO direction as output */ + clrbits_be32((u32 *)GPIO_BANK0_REG_DIR_ADDR, (0x01 << 11)); + + /* Set the output as low */ + val = readl(GPIO_BANK0_REG_SET_ADDR); + val |= (0x01 << 11); + writel(val, GPIO_BANK0_REG_CLR_ADDR); +#endif + #ifdef CONFIG_DRIVER_TI_EMAC if (davinci_configure_pin_mux(emac_pins, ARRAY_SIZE(emac_pins)) != 0) return 1; diff --git a/board/edb93xx/Makefile b/board/edb93xx/Makefile deleted file mode 100644 index dcaed06b30..0000000000 --- a/board/edb93xx/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := edb93xx.o flash_cfg.o pll_cfg.o sdram_cfg.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/edb93xx/config.mk b/board/edb93xx/config.mk deleted file mode 100644 index fab59ef73c..0000000000 --- a/board/edb93xx/config.mk +++ /dev/null @@ -1,33 +0,0 @@ -LDSCRIPT := $(SRCTREE)/arch/arm/cpu/arm920t/ep93xx/u-boot.lds - -ifdef CONFIG_EDB9301 -CONFIG_SYS_TEXT_BASE = 0x05700000 -endif - -ifdef CONFIG_EDB9302 -CONFIG_SYS_TEXT_BASE = 0x05700000 -endif - -ifdef CONFIG_EDB9302A -CONFIG_SYS_TEXT_BASE = 0xc5700000 -endif - -ifdef CONFIG_EDB9307 -CONFIG_SYS_TEXT_BASE = 0x01f00000 -endif - -ifdef CONFIG_EDB9307A -CONFIG_SYS_TEXT_BASE = 0xc1f00000 -endif - -ifdef CONFIG_EDB9312 -CONFIG_SYS_TEXT_BASE = 0x01f00000 -endif - -ifdef CONFIG_EDB9315 -CONFIG_SYS_TEXT_BASE = 0x01f00000 -endif - -ifdef CONFIG_EDB9315A -CONFIG_SYS_TEXT_BASE = 0xc1f00000 -endif diff --git a/board/edb93xx/edb93xx.c b/board/edb93xx/edb93xx.c deleted file mode 100644 index dde30ffdc2..0000000000 --- a/board/edb93xx/edb93xx.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net> - * - * (C) Copyright 2002 2003 - * Network Audio Technologies, Inc. <www.netaudiotech.com> - * Adam Bezanson <bezanson@netaudiotech.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#include <asm/arch/ep93xx.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define MAX_BANK_SIZE 0x04000000 /* 64 MB */ - -static ulong const bank_addr[CONFIG_NR_DRAM_BANKS] = { - PHYS_SDRAM_1, -#ifdef PHYS_SDRAM_2 - PHYS_SDRAM_2, -#endif -#ifdef PHYS_SDRAM_3 - PHYS_SDRAM_3, -#endif -#ifdef PHYS_SDRAM_4 - PHYS_SDRAM_4 -#endif -}; - -int board_init(void) -{ - struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE; - - icache_enable(); - -#ifdef USE_920T_MMU - dcache_enable(); -#endif - - /* - * set UARTBAUD bit to drive UARTs with 14.7456MHz instead of - * 14.7456/2 MHz - */ - uint32_t value = readl(&syscon->pwrcnt); - value |= SYSCON_PWRCNT_UART_BAUD; - writel(value, &syscon->pwrcnt); - - /* Enable the uart in devicecfg */ - value = readl(&syscon->devicecfg); - value |= 1<<18 /* U1EN */; - writel(0xAA, &syscon->sysswlock); - writel(value, &syscon->devicecfg); - - /* Machine number, as defined in linux/arch/arm/tools/mach-types */ - gd->bd->bi_arch_number = CONFIG_MACH_TYPE; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - /* We have a console */ - gd->have_console = 1; - - return 0; -} - -int board_eth_init(bd_t *bd) -{ - return ep93xx_eth_initialize(0, MAC_BASE); -} - -int dram_init(void) -{ - unsigned int *src, *dst; - int i; - - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - const ulong bank_size = get_ram_size((long *)bank_addr[i], - MAX_BANK_SIZE); - if (bank_size) { - gd->bd->bi_dram[i].start = bank_addr[i]; - gd->bd->bi_dram[i].size = bank_size; - } - } - - /* copy exception vectors */ - src = (unsigned int *)_armboot_start; - dst = (unsigned int *)PHYS_SDRAM_1; - memcpy(dst, src, 16 * sizeof(unsigned int)); - - return 0; -} diff --git a/board/edb93xx/pll_cfg.c b/board/edb93xx/pll_cfg.c deleted file mode 100644 index a687af0a01..0000000000 --- a/board/edb93xx/pll_cfg.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * PLL setup for Cirrus edb93xx boards - * - * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net> - * - * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include "pll_cfg.h" -#include "early_udelay.h" - -void pll_cfg(void) -{ - struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE; - - /* setup PLL1 */ - writel(CLKSET1_VAL, &syscon->clkset1); - - /* - * flush the pipeline - * writing to CLKSET1 causes the EP93xx to enter standby for between - * 8 ms to 16 ms, until PLL1 stabilizes - */ - asm("nop"); - asm("nop"); - asm("nop"); - asm("nop"); - asm("nop"); - - /* setup PLL2 */ - writel(CLKSET2_VAL, &syscon->clkset2); - - /* - * the user's guide recommends to wait at least 1 ms for PLL2 to - * stabilize - */ - early_udelay(1000); -} diff --git a/board/edb93xx/pll_cfg.h b/board/edb93xx/pll_cfg.h deleted file mode 100644 index 0b6f469340..0000000000 --- a/board/edb93xx/pll_cfg.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * PLL register values for Cirrus edb93xx boards - * - * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <asm/arch/ep93xx.h> - -#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \ - defined(CONFIG_EDB9302A) -/* - * fclk_div: 2, nbyp1: 1, hclk_div: 5, pclk_div: 2 - * pll1_x1: 294912000.000000, pll1_x2ip: 36864000.000000, - * pll1_x2: 331776000.000000, pll1_out: 331776000.000000 - */ -#define CLKSET1_VAL (7 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \ - 8 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \ - 19 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \ - 1 << SYSCON_CLKSET1_PCLK_DIV_SHIFT | \ - 3 << SYSCON_CLKSET1_HCLK_DIV_SHIFT | \ - SYSCON_CLKSET1_NBYP1 | \ - 1 << SYSCON_CLKSET1_FCLK_DIV_SHIFT) -#elif defined(CONFIG_EDB9307) || defined(CONFIG_EDB9307A) || \ - defined CONFIG_EDB9312 || defined(CONFIG_EDB9315) || \ - defined(CONFIG_EDB9315A) -/* - * fclk_div: 2, nbyp1: 1, hclk_div: 4, pclk_div: 2 - * pll1_x1: 3096576000.000000, pll1_x2ip: 129024000.000000, - * pll1_x2: 3999744000.000000, pll1_out: 1999872000.000000 - */ -#define CLKSET1_VAL (23 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \ - 30 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \ - 20 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \ - 1 << SYSCON_CLKSET1_PCLK_DIV_SHIFT | \ - 2 << SYSCON_CLKSET1_HCLK_DIV_SHIFT | \ - SYSCON_CLKSET1_NBYP1 | \ - 1 << SYSCON_CLKSET1_FCLK_DIV_SHIFT) -#else -#error "Undefined board" -#endif - -/* - * usb_div: 4, nbyp2: 1, pll2_en: 1 - * pll2_x1: 368640000.000000, pll2_x2ip: 15360000.000000, - * pll2_x2: 384000000.000000, pll2_out: 192000000.000000 - */ -#define CLKSET2_VAL (23 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \ - 24 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \ - 24 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \ - 1 << SYSCON_CLKSET_PLL_PS_SHIFT | \ - SYSCON_CLKSET2_PLL2_EN | \ - SYSCON_CLKSET2_NBYP2 | \ - 3 << SYSCON_CLKSET2_USB_DIV_SHIFT) diff --git a/board/edb93xx/sdram_cfg.c b/board/edb93xx/sdram_cfg.c deleted file mode 100644 index 440ad11fcb..0000000000 --- a/board/edb93xx/sdram_cfg.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * Copyright (C) 2009, 2010 Matthias Kaehlcke <matthias@kaehlcke.net> - * - * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <asm/io.h> -#include "sdram_cfg.h" -#include "early_udelay.h" - -#define PROGRAM_MODE_REG(bank) (*(volatile uint32_t *) \ - (SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank | SDRAM_MODE_REG_VAL)) - -#define PRECHARGE_BANK(bank) (*(volatile uint32_t *) \ - (SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank)) = 0 - -static void precharge_all_banks(void); -static void setup_refresh_timer(void); -static void program_mode_registers(void); - -void sdram_cfg(void) -{ - struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE; - - writel(SDRAM_DEVCFG_VAL, &sdram->SDRAM_DEVCFG_REG); - - /* Issue continous NOP commands */ - writel(GLCONFIG_INIT | GLCONFIG_MRS | GLCONFIG_CKE, &sdram->glconfig); - - early_udelay(200); - - precharge_all_banks(); - - setup_refresh_timer(); - - program_mode_registers(); - - /* Select normal operation mode */ - writel(GLCONFIG_CKE, &sdram->glconfig); -} - -static void precharge_all_banks(void) -{ - struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE; - - /* Issue PRECHARGE ALL commands */ - writel(GLCONFIG_INIT | GLCONFIG_CKE, &sdram->glconfig); - - /* - * Errata of most EP93xx revisions say that PRECHARGE ALL isn't always - * issued - * - * Cirrus proposes a workaround which consists in performing a read from - * each bank to force the precharge. This causes some boards to hang. - * Writing to the SDRAM banks instead of reading has the same - * side-effect (the SDRAM controller issues the necessary precharges), - * but is known to work on all supported boards - */ - - PRECHARGE_BANK(0); - -#if (CONFIG_NR_DRAM_BANKS >= 2) - PRECHARGE_BANK(1); -#endif - -#if (CONFIG_NR_DRAM_BANKS >= 3) - PRECHARGE_BANK(2); -#endif - -#if (CONFIG_NR_DRAM_BANKS == 4) - PRECHARGE_BANK(3); -#endif -} - -static void setup_refresh_timer(void) -{ - struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE; - - /* Load refresh timer with 10 to issue refresh every 10 cycles */ - writel(0x0a, &sdram->refrshtimr); - - /* - * Wait at least 80 clock cycles to provide 8 refresh cycles - * to all SDRAMs - */ - early_udelay(1); - - /* - * Program refresh timer with normal value - * We need 8192 refresh cycles every 64ms - * at 15ns (HCLK >= 66MHz) per cycle: - * 64ms / 8192 = 7.8125us - * 7.8125us / 15ns = 520 (0x208) - */ - /* - * TODO: redboot uses 0x1e0 for the slowest possible device - * but i don't understand how this value is calculated - */ - writel(0x208, &sdram->refrshtimr); -} - -static void program_mode_registers(void) -{ - struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE; - - /* Select mode register update mode */ - writel(GLCONFIG_MRS | GLCONFIG_CKE, &sdram->glconfig); - - /* - * The mode registers are programmed by performing a read from each - * SDRAM bank. The value of the address that is read defines the value - * that is written into the mode register - */ - - PROGRAM_MODE_REG(0); - -#if (CONFIG_NR_DRAM_BANKS >= 2) - PROGRAM_MODE_REG(1); -#endif - -#if (CONFIG_NR_DRAM_BANKS >= 3) - PROGRAM_MODE_REG(2); -#endif - -#if (CONFIG_NR_DRAM_BANKS == 4) - PROGRAM_MODE_REG(3); -#endif -} diff --git a/board/edb93xx/sdram_cfg.h b/board/edb93xx/sdram_cfg.h deleted file mode 100644 index 757b63c256..0000000000 --- a/board/edb93xx/sdram_cfg.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net> - * - * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <asm/arch/ep93xx.h> - -#define SDRAM_BASE_ADDR PHYS_SDRAM_1 - -#ifdef CONFIG_EDB93XX_SDCS0 -#define SDRAM_DEVCFG_REG devcfg0 -#elif defined(CONFIG_EDB93XX_SDCS3) -#define SDRAM_DEVCFG_REG devcfg3 -#else -#error "SDRAM bank configuration" -#endif - -#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \ - defined(CONFIG_EDB9302A) -/* - * 1x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM - * - * CLK cycle time min: - * @ CAS latency = 3: 7.5ns - * @ CAS latency = 2: 10ns - * We're running at 66MHz (15ns cycle time) external bus speed (HCLK), - * so it's safe to use CAS latency = 2 - * - * RAS-to-CAS delay min: - * 20ns - * At 15ns cycle time, we use RAS-to-CAS delay = 2 - * - * SROMLL = 1: Swap BA[1:0] with A[13:12], making the SDRAM appear - * as four blocks of 8MB size, instead of eight blocks of 4MB size: - * - * EDB9301/EDB9302: - * - * 0x00000000 - 0x007fffff - * 0x01000000 - 0x017fffff - * 0x04000000 - 0x047fffff - * 0x05000000 - 0x057fffff - * - * - * EDB9302a: - * - * 0xc0000000 - 0xc07fffff - * 0xc1000000 - 0xc17fffff - * 0xc4000000 - 0xc47fffff - * 0xc5000000 - 0xc57fffff - * - * BANKCOUNT = 1: This is a device with four banks - */ - -#define SDRAM_DEVCFG_VAL (SDRAM_DEVCFG_BANKCOUNT | \ - SDRAM_DEVCFG_SROMLL | \ - SDRAM_DEVCFG_CASLAT_2 | \ - SDRAM_DEVCFG_RASTOCAS_2 | \ - SDRAM_DEVCFG_EXTBUSWIDTH) - -/* - * 16 bit ext. bus - * - * A[22:09] is output as SYA[13:0] - * CAS latency: 2 - * Burst type: sequential - * Burst length: 8 (required for 16 bit ext. bus) - * SYA[13:0] = 0x0023 - */ -#define SDRAM_MODE_REG_VAL 0x4600 - -#define SDRAM_BANK_SEL_0 0x00000000 /* A[22:21] = b00 */ -#define SDRAM_BANK_SEL_1 0x00200000 /* A[22:21] = b01 */ -#define SDRAM_BANK_SEL_2 0x00400000 /* A[22:21] = b10 */ -#define SDRAM_BANK_SEL_3 0x00600000 /* A[22:21] = b11 */ - -#elif defined(CONFIG_EDB9307) || defined(CONFIG_EDB9307A) || \ - defined CONFIG_EDB9312 || defined(CONFIG_EDB9315) || \ - defined(CONFIG_EDB9315A) -/* - * 2x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM - * - * CLK cycle time min: - * @ CAS latency = 3: 7.5ns - * @ CAS latency = 2: 10ns - * We're running at 100MHz (10ns cycle time) external bus speed (HCLK), - * so it's safe to use CAS latency = 2 - * - * RAS-to-CAS delay min: - * 20ns - * At 10ns cycle time, we use RAS-to-CAS delay = 2 - * - * EDB9307, EDB9312, EDB9315: - * - * 0x00000000 - 0x01ffffff - * 0x04000000 - 0x05ffffff - * - * - * EDB9307a, EDB9315a: - * - * 0xc0000000 - 0xc1ffffff - * 0xc4000000 - 0xc5ffffff - */ - -#define SDRAM_DEVCFG_VAL (SDRAM_DEVCFG_BANKCOUNT | \ - SDRAM_DEVCFG_SROMLL | \ - SDRAM_DEVCFG_CASLAT_2 | \ - SDRAM_DEVCFG_RASTOCAS_2) - -/* - * 32 bit ext. bus - * - * A[23:10] is output as SYA[13:0] - * CAS latency: 2 - * Burst type: sequential - * Burst length: 4 - * SYA[13:0] = 0x0022 - */ -#define SDRAM_MODE_REG_VAL 0x8800 - -#define SDRAM_BANK_SEL_0 0x00000000 /* A[23:22] = b00 */ -#define SDRAM_BANK_SEL_1 0x00400000 /* A[23:22] = b01 */ -#define SDRAM_BANK_SEL_2 0x00800000 /* A[23:22] = b10 */ -#define SDRAM_BANK_SEL_3 0x00c00000 /* A[23:22] = b11 */ -#endif diff --git a/board/efikamx/efikamx.c b/board/efikamx/efikamx.c index 4b3691808e..5be1f6ca58 100644 --- a/board/efikamx/efikamx.c +++ b/board/efikamx/efikamx.c @@ -27,7 +27,7 @@ #include <asm/arch/imx-regs.h> #include <asm/arch/mx5x_pins.h> #include <asm/arch/iomux.h> -#include <mxc_gpio.h> +#include <asm/gpio.h> #include <asm/errno.h> #include <asm/arch/sys_proto.h> #include <asm/arch/crm_regs.h> @@ -76,28 +76,23 @@ u32 get_efika_rev(void) * rev1.4: 1,0,0 */ mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), - MXC_GPIO_DIRECTION_OUT); /* set to 1 in order to get correct value on board rev1.1 */ - mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), 1); + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), 1); mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO); mxc_iomux_set_pad(MX51_PIN_NANDF_CS0, PAD_CTL_100K_PU); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), - MXC_GPIO_DIRECTION_IN); - rev |= (!!mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0))) << 0; + gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0)); + rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0))) << 0; mxc_request_iomux(MX51_PIN_NANDF_CS1, IOMUX_CONFIG_GPIO); mxc_iomux_set_pad(MX51_PIN_NANDF_CS1, PAD_CTL_100K_PU); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1), - MXC_GPIO_DIRECTION_IN); - rev |= (!!mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1))) << 1; + gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1)); + rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1))) << 1; mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_GPIO); mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, PAD_CTL_100K_PU); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3), - MXC_GPIO_DIRECTION_IN); - rev |= (!!mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3))) << 2; + gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3)); + rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3))) << 2; return (~rev & 0x7) + 1; } @@ -154,15 +149,11 @@ static void setup_iomux_spi(void) /* Configure SS0 as a GPIO */ mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_GPIO); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS0), - MXC_GPIO_DIRECTION_OUT); - mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS0), 0); + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS0), 0); /* Configure SS1 as a GPIO */ mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_GPIO); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS1), - MXC_GPIO_DIRECTION_OUT); - mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS1), 1); + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS1), 1); /* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */ mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0); @@ -282,9 +273,9 @@ int board_mmc_getcd(u8 *absent, struct mmc *mmc) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - *absent = mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0)); + *absent = gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0)); else - *absent = mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8)); + *absent = gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8)); return 0; } @@ -307,10 +298,8 @@ int board_mmc_init(bd_t *bis) PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE | PAD_CTL_SRE_FAST); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0), - MXC_GPIO_DIRECTION_IN); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1), - MXC_GPIO_DIRECTION_IN); + gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0)); + gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1)); /* Internal SDHC1 IOMUX + SDHC2 IOMUX on old boards */ if (get_efika_rev() < EFIKAMX_BOARD_REV_12) { @@ -389,10 +378,8 @@ int board_mmc_init(bd_t *bis) PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE | PAD_CTL_SRE_FAST); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8), - MXC_GPIO_DIRECTION_IN); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_GPIO1_7), - MXC_GPIO_DIRECTION_IN); + gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8)); + gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_7)); ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]); if (!ret) @@ -508,25 +495,24 @@ void setup_iomux_led(void) { /* Blue LED */ mxc_request_iomux(MX51_PIN_CSI1_D9, IOMUX_CONFIG_ALT3); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), - MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), 0); + /* Green LED */ mxc_request_iomux(MX51_PIN_CSI1_VSYNC, IOMUX_CONFIG_ALT3); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), - MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), 0); + /* Red LED */ mxc_request_iomux(MX51_PIN_CSI1_HSYNC, IOMUX_CONFIG_ALT3); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), - MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), 0); } void efikamx_toggle_led(uint32_t mask) { - mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), mask & EFIKAMX_LED_BLUE); - mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), mask & EFIKAMX_LED_GREEN); - mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), mask & EFIKAMX_LED_RED); } diff --git a/board/esd/meesc/config.mk b/board/esd/meesc/config.mk deleted file mode 100644 index 207769233e..0000000000 --- a/board/esd/meesc/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x21f00000 diff --git a/board/esd/meesc/meesc.c b/board/esd/meesc/meesc.c index 41fa3e1567..ad43531cb1 100644 --- a/board/esd/meesc/meesc.c +++ b/board/esd/meesc/meesc.c @@ -3,7 +3,7 @@ * Stelian Pop <stelian.pop@leadtechdesign.com> * Lead Tech Design <www.leadtechdesign.com> * - * (C) Copyright 2009-2010 + * (C) Copyright 2009-2011 * Daniel Gorsulowski <daniel.gorsulowski@esd.eu> * esd electronic system design gmbh <www.esd.eu> * @@ -27,7 +27,7 @@ */ #include <common.h> -#include <asm/arch/at91sam9263.h> +#include <asm/io.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> @@ -35,8 +35,6 @@ #include <asm/arch/at91_matrix.h> #include <asm/arch/at91_pio.h> #include <asm/arch/clk.h> -#include <asm/arch/hardware.h> -#include <asm/arch/io.h> #include <netdev.h> DECLARE_GLOBAL_DATA_PTR; @@ -67,8 +65,8 @@ int get_hw_rev(void) static void meesc_nand_hw_init(void) { unsigned long csa; - at91_smc_t *smc = (at91_smc_t *) AT91_SMC0_BASE; - at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; + at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0; + at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX; /* Enable CS3 */ csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A; @@ -88,7 +86,7 @@ static void meesc_nand_hw_init(void) writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | AT91_SMC_MODE_EXNW_DISABLE | AT91_SMC_MODE_DBW_8 | - AT91_SMC_MODE_TDF_CYCLE(2), + AT91_SMC_MODE_TDF_CYCLE(3), &smc->cs[3].mode); /* Configure RDY/BSY */ @@ -102,9 +100,9 @@ static void meesc_nand_hw_init(void) #ifdef CONFIG_MACB static void meesc_macb_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; /* Enable clock */ - writel(1 << AT91SAM9263_ID_EMAC, &pmc->pcer); + writel(1 << ATMEL_ID_EMAC, &pmc->pcer); at91_macb_hw_init(); } #endif @@ -117,7 +115,7 @@ static void meesc_macb_hw_init(void) */ static void meesc_ethercat_hw_init(void) { - at91_smc_t *smc1 = (at91_smc_t *) AT91_SMC1_BASE; + at91_smc_t *smc1 = (at91_smc_t *) ATMEL_BASE_SMC1; /* Configure SMC EBI1_CS0 for EtherCAT */ writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | @@ -142,8 +140,9 @@ static void meesc_ethercat_hw_init(void) int dram_init(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = get_ram_size((long *) PHYS_SDRAM, (1 << 27)); + gd->ram_size = get_ram_size( + (void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); return 0; } @@ -151,7 +150,7 @@ int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x00); + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00); #endif return rc; } @@ -225,7 +224,7 @@ int misc_init_r(void) { char *str; char buf[32]; - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; /* * Normally the processor clock has a divisor of 2. @@ -246,24 +245,28 @@ int misc_init_r(void) } #endif /* CONFIG_MISC_INIT_R */ -int board_init(void) +int board_early_init_f(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - /* Peripheral Clock Enable Register */ - writel(1 << AT91SAM9263_ID_PIOA | - 1 << AT91SAM9263_ID_PIOB | - 1 << AT91SAM9263_ID_PIOCDE | - 1 << AT91SAM9263_ID_UHP, + /* enable all clocks */ + writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | + (1 << ATMEL_ID_PIOCDE) | (1 << ATMEL_ID_UHP), &pmc->pcer); + at91_seriald_hw_init(); + + return 0; +} + +int board_init(void) +{ /* initialize ET1100 Controller */ meesc_ethercat_hw_init(); /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - at91_serial_hw_init(); #ifdef CONFIG_CMD_NAND meesc_nand_hw_init(); #endif diff --git a/board/freescale/mx35pdk/lowlevel_init.S b/board/freescale/mx35pdk/lowlevel_init.S index 9b0f1b5259..9fd04cbdb8 100644 --- a/board/freescale/mx35pdk/lowlevel_init.S +++ b/board/freescale/mx35pdk/lowlevel_init.S @@ -193,10 +193,11 @@ mov r2, #0x00 mov r1, #CSD0_BASE_ADDR bl setup_sdram_bank - cmp r3, #0x0 - orreq r5, r5, #1 - eorne r2, r2, #0x1 - blne setup_sdram_bank + + mov r5, #0x00 + mov r2, #0x00 + mov r1, #CSD1_BASE_ADDR + bl setup_sdram_bank mov lr, fp diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c index da926e5781..9eefe5ee16 100644 --- a/board/freescale/mx35pdk/mx35pdk.c +++ b/board/freescale/mx35pdk/mx35pdk.c @@ -34,7 +34,7 @@ #include <mc9sdz60.h> #include <mc13892.h> #include <linux/types.h> -#include <mxc_gpio.h> +#include <asm/gpio.h> #include <asm/arch/sys_proto.h> #include <netdev.h> @@ -52,12 +52,25 @@ DECLARE_GLOBAL_DATA_PTR; int dram_init(void) { - gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, - PHYS_SDRAM_1_SIZE); + u32 size1, size2; + + size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); + size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); + + gd->ram_size = size1 + size2; return 0; } +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; +} + static void setup_iomux_i2c(void) { int pad; @@ -227,8 +240,7 @@ int board_late_init(void) mxc_request_iomux(MX35_PIN_COMPARE, MUX_CONFIG_GPIO); mxc_iomux_set_input(MUX_IN_GPIO1_IN_5, INPUT_CTL_PATH0); - mxc_gpio_direction(37, MXC_GPIO_DIRECTION_OUT); - mxc_gpio_set(37, 1); + gpio_direction_output(37, 1); } val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04; diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index fd7342f112..94ea1f2905 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -22,6 +22,7 @@ #include <common.h> #include <asm/io.h> +#include <asm/gpio.h> #include <asm/arch/imx-regs.h> #include <asm/arch/mx5x_pins.h> #include <asm/arch/iomux.h> @@ -180,7 +181,6 @@ static void setup_iomux_spi(void) static void power_init(void) { unsigned int val; - unsigned int reg; struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE; /* Write needed to Power Gate 2 register */ @@ -249,13 +249,7 @@ static void power_init(void) pmic_reg_write(REG_MODE_1, val); udelay(200); - reg = readl(GPIO2_BASE_ADDR + 0x0); - reg &= ~0x4000; /* Lower reset line */ - writel(reg, GPIO2_BASE_ADDR + 0x0); - - reg = readl(GPIO2_BASE_ADDR + 0x4); - reg |= 0x4000; /* configure GPIO lines as output */ - writel(reg, GPIO2_BASE_ADDR + 0x4); + gpio_direction_output(46, 0); /* Reset the ethernet controller over GPIO */ writel(0x1, IOMUXC_BASE_ADDR + 0x0AC); @@ -267,9 +261,7 @@ static void power_init(void) udelay(500); - reg = readl(GPIO2_BASE_ADDR + 0x0); - reg |= 0x4000; - writel(reg, GPIO2_BASE_ADDR + 0x0); + gpio_set_value(46, 1); } #ifdef CONFIG_FSL_ESDHC @@ -278,9 +270,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - *cd = readl(GPIO1_BASE_ADDR) & 0x01; + *cd = gpio_get_value(0); else - *cd = readl(GPIO1_BASE_ADDR) & 0x40; + *cd = gpio_get_value(6); return 0; } diff --git a/board/freescale/mx53ard/imximage_dd3.cfg b/board/freescale/mx53ard/imximage_dd3.cfg index 0f298abbd5..50e05afa62 100644 --- a/board/freescale/mx53ard/imximage_dd3.cfg +++ b/board/freescale/mx53ard/imximage_dd3.cfg @@ -83,14 +83,14 @@ DATA 4 0x63fd9004 0x0002002d DATA 4 0x63fd901c 0x00008032 DATA 4 0x63fd901c 0x00008033 DATA 4 0x63fd901c 0x00028031 -DATA 4 0x63fd901c 0x092080b0 +DATA 4 0x63fd901c 0x052080b0 DATA 4 0x63fd901c 0x04008040 DATA 4 0x63fd901c 0x0000803a DATA 4 0x63fd901c 0x0000803b DATA 4 0x63fd901c 0x00028039 -DATA 4 0x63fd901c 0x09208138 +DATA 4 0x63fd901c 0x05208138 DATA 4 0x63fd901c 0x04008048 -DATA 4 0x63fd9020 0x00001800 +DATA 4 0x63fd9020 0x00005800 DATA 4 0x63fd9040 0x04b80003 DATA 4 0x63fd9058 0x00022227 DATA 4 0x63fd901C 0x00000000 diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c index 134603a7cf..6e3360b65f 100644 --- a/board/freescale/mx53ard/mx53ard.c +++ b/board/freescale/mx53ard/mx53ard.c @@ -31,7 +31,7 @@ #include <netdev.h> #include <mmc.h> #include <fsl_esdhc.h> -#include <mxc_gpio.h> +#include <asm/gpio.h> #define ETHERNET_INT (1 * 32 + 31) /* GPIO2_31 */ @@ -93,9 +93,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - *cd = mxc_gpio_get(1); /*GPIO1_1*/ + *cd = gpio_get_value(1); /*GPIO1_1*/ else - *cd = mxc_gpio_get(4); /*GPIO1_4*/ + *cd = gpio_get_value(4); /*GPIO1_4*/ return 0; } @@ -176,7 +176,7 @@ static void weim_smc911x_iomux(void) { /* ETHERNET_INT as GPIO2_31 */ mxc_request_iomux(MX53_PIN_EIM_EB3, IOMUX_CONFIG_ALT1); - mxc_gpio_direction(ETHERNET_INT, MXC_GPIO_DIRECTION_IN); + gpio_direction_input(ETHERNET_INT); /* Data bus */ mxc_request_iomux(MX53_PIN_EIM_D16, IOMUX_CONFIG_ALT0); diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c index 88095dc7ae..81857ffed3 100644 --- a/board/freescale/mx53evk/mx53evk.c +++ b/board/freescale/mx53evk/mx53evk.c @@ -33,7 +33,7 @@ #include <mmc.h> #include <fsl_esdhc.h> #include <fsl_pmic.h> -#include <mxc_gpio.h> +#include <asm/gpio.h> #include <mc13892.h> DECLARE_GLOBAL_DATA_PTR; @@ -213,9 +213,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - *cd = mxc_gpio_get(77); /*GPIO3_13*/ + *cd = gpio_get_value(77); /*GPIO3_13*/ else - *cd = mxc_gpio_get(75); /*GPIO3_11*/ + *cd = gpio_get_value(75); /*GPIO3_11*/ return 0; } diff --git a/board/freescale/mx53loco/imximage.cfg b/board/freescale/mx53loco/imximage.cfg index ce9c8fc3e3..f30258eda4 100644 --- a/board/freescale/mx53loco/imximage.cfg +++ b/board/freescale/mx53loco/imximage.cfg @@ -83,14 +83,14 @@ DATA 4 0x63fd9004 0x0002002d DATA 4 0x63fd901c 0x00008032 DATA 4 0x63fd901c 0x00008033 DATA 4 0x63fd901c 0x00028031 -DATA 4 0x63fd901c 0x092080b0 +DATA 4 0x63fd901c 0x052080b0 DATA 4 0x63fd901c 0x04008040 DATA 4 0x63fd901c 0x0000803a DATA 4 0x63fd901c 0x0000803b DATA 4 0x63fd901c 0x00028039 -DATA 4 0x63fd901c 0x09208138 +DATA 4 0x63fd901c 0x05208138 DATA 4 0x63fd901c 0x04008048 -DATA 4 0x63fd9020 0x00001800 +DATA 4 0x63fd9020 0x00005800 DATA 4 0x63fd9040 0x04b80003 DATA 4 0x63fd9058 0x00022227 DATA 4 0x63fd901c 0x00000000 diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index 18b388eeda..ade100608d 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -34,7 +34,7 @@ #include <i2c.h> #include <mmc.h> #include <fsl_esdhc.h> -#include <mxc_gpio.h> +#include <asm/gpio.h> DECLARE_GLOBAL_DATA_PTR; @@ -146,9 +146,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - *cd = mxc_gpio_get(77); /*GPIO3_13*/ + *cd = gpio_get_value(77); /*GPIO3_13*/ else - *cd = mxc_gpio_get(75); /*GPIO3_11*/ + *cd = gpio_get_value(75); /*GPIO3_11*/ return 0; } diff --git a/board/freescale/mx53smd/imximage.cfg b/board/freescale/mx53smd/imximage.cfg index 0f298abbd5..50e05afa62 100644 --- a/board/freescale/mx53smd/imximage.cfg +++ b/board/freescale/mx53smd/imximage.cfg @@ -83,14 +83,14 @@ DATA 4 0x63fd9004 0x0002002d DATA 4 0x63fd901c 0x00008032 DATA 4 0x63fd901c 0x00008033 DATA 4 0x63fd901c 0x00028031 -DATA 4 0x63fd901c 0x092080b0 +DATA 4 0x63fd901c 0x052080b0 DATA 4 0x63fd901c 0x04008040 DATA 4 0x63fd901c 0x0000803a DATA 4 0x63fd901c 0x0000803b DATA 4 0x63fd901c 0x00028039 -DATA 4 0x63fd901c 0x09208138 +DATA 4 0x63fd901c 0x05208138 DATA 4 0x63fd901c 0x04008048 -DATA 4 0x63fd9020 0x00001800 +DATA 4 0x63fd9020 0x00005800 DATA 4 0x63fd9040 0x04b80003 DATA 4 0x63fd9058 0x00022227 DATA 4 0x63fd901C 0x00000000 diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c index 21b5d14c02..4a7ee550d5 100644 --- a/board/freescale/mx53smd/mx53smd.c +++ b/board/freescale/mx53smd/mx53smd.c @@ -31,7 +31,7 @@ #include <netdev.h> #include <mmc.h> #include <fsl_esdhc.h> -#include <mxc_gpio.h> +#include <asm/gpio.h> DECLARE_GLOBAL_DATA_PTR; @@ -139,7 +139,7 @@ struct fsl_esdhc_cfg esdhc_cfg[1] = { int board_mmc_getcd(u8 *cd, struct mmc *mmc) { - *cd = mxc_gpio_get(77); /*GPIO3_13*/ + *cd = gpio_get_value(77); /*GPIO3_13*/ return 0; } diff --git a/board/kb9202/Makefile b/board/kb9202/Makefile deleted file mode 100644 index 49be161fa2..0000000000 --- a/board/kb9202/Makefile +++ /dev/null @@ -1,53 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -# Adapted for KwikByte KB920x boards - APR2005 -# -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := kb9202.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/kb9202/config.mk b/board/kb9202/config.mk deleted file mode 100644 index 207769233e..0000000000 --- a/board/kb9202/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x21f00000 diff --git a/board/kb9202/kb9202.c b/board/kb9202/kb9202.c deleted file mode 100644 index 3164cc5ac4..0000000000 --- a/board/kb9202/kb9202.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Adapted for KwikByte KB920x board from at91rm9200dk.c: 22APR2005 - */ - -#include <common.h> -#include <asm/arch/AT91RM9200.h> -#include <asm/io.h> -#include <netdev.h> -#if defined(CONFIG_DRIVER_ETHER) -#include <at91rm9200_net.h> -#include <lxt971a.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -void lowlevel_init(void) { - /* Required by assembly functions - do nothing */ -} - -int board_init (void) -{ - /* Enable Ctrlc */ - console_init_f (); - - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - gd->bd->bi_arch_number = MACH_TYPE_KB9200; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; - return 0; -} - -#ifdef CONFIG_DRIVER_ETHER -#if defined(CONFIG_CMD_NET) - -unsigned int lxt972_IsPhyConnected (AT91PS_EMAC p_mac); -UCHAR lxt972_GetLinkSpeed (AT91PS_EMAC p_mac); -UCHAR lxt972_InitPhy (AT91PS_EMAC p_mac); -UCHAR lxt972_AutoNegotiate (AT91PS_EMAC p_mac, int *status); - -/* - * Name: - * at91rm9200_GetPhyInterface - * Description: - * Initialise the interface functions to the PHY - * Arguments: - * None - * Return value: - * None - */ -void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops) -{ - p_phyops->Init = lxt972_InitPhy; - p_phyops->IsPhyConnected = lxt972_IsPhyConnected; - p_phyops->GetLinkSpeed = lxt972_GetLinkSpeed; - p_phyops->AutoNegotiate = lxt972_AutoNegotiate; -} - -#endif -#endif /* CONFIG_DRIVER_ETHER */ - -#ifdef CONFIG_DRIVER_AT91EMAC -int board_eth_init(bd_t *bis) -{ - int rc = 0; - rc = at91emac_register(bis, 0); - return rc; -} -#endif diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c index bbb6e834ec..c0a006a7b3 100644 --- a/board/logicpd/am3517evm/am3517evm.c +++ b/board/logicpd/am3517evm/am3517evm.c @@ -28,6 +28,7 @@ #include <asm/arch/mem.h> #include <asm/arch/mux.h> #include <asm/arch/sys_proto.h> +#include <asm/arch/mmc_host_def.h> #include <asm/mach-types.h> #include <i2c.h> #include "am3517evm.h" @@ -74,3 +75,11 @@ void set_muxconf_regs(void) { MUX_AM3517EVM(); } + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0); + return 0; +} +#endif diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c index 7ef13cc623..dec0b2611f 100644 --- a/board/logicpd/zoom1/zoom1.c +++ b/board/logicpd/zoom1/zoom1.c @@ -34,6 +34,7 @@ #include <netdev.h> #include <twl4030.h> #include <asm/io.h> +#include <asm/arch/mmc_host_def.h> #include <asm/arch/mux.h> #include <asm/arch/sys_proto.h> #include <asm/mach-types.h> @@ -88,6 +89,14 @@ void set_muxconf_regs(void) MUX_ZOOM1_MDK(); } +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0); + return 0; +} +#endif + #ifdef CONFIG_CMD_NET int board_eth_init(bd_t *bis) { diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c index 76793e42e7..800113a976 100644 --- a/board/logicpd/zoom2/zoom2.c +++ b/board/logicpd/zoom2/zoom2.c @@ -35,6 +35,7 @@ #endif #include <twl4030.h> #include <asm/io.h> +#include <asm/arch/mmc_host_def.h> #include <asm/arch/gpio.h> #include <asm/arch/mem.h> #include <asm/arch/mux.h> @@ -180,6 +181,14 @@ void set_muxconf_regs (void) MUX_ZOOM2 (); } +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0); + return 0; +} +#endif + #ifdef CONFIG_CMD_NET int board_eth_init(bd_t *bis) { diff --git a/board/lpd7a40x/Makefile b/board/lpd7a40x/Makefile deleted file mode 100644 index 3aeb2fb1ad..0000000000 --- a/board/lpd7a40x/Makefile +++ /dev/null @@ -1,51 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := lpd7a40x.o flash.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/lpd7a40x/config.mk b/board/lpd7a40x/config.mk deleted file mode 100644 index 003e70740f..0000000000 --- a/board/lpd7a40x/config.mk +++ /dev/null @@ -1,38 +0,0 @@ -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# Logic ZOOM LH7A400 SDK board w/Logic LH7A400-10 card engine -# w/Sharp LH7A400 SoC (ARM920T) cpu -# - -# -# 32 or 64 MB SDRAM on SDCSC0 @ 0xc0000000 -# -# Linux-Kernel is @ 0xC0008000, entry 0xc0008000 -# params @ 0xc0000100 -# optionally with a ramdisk at 0xc0300000 -# -# we load ourself to 0xc1fc0000 (32M - 256K) -# -# download area is 0xc0f00000 -# - -CONFIG_SYS_TEXT_BASE = 0xc1fc0000 -#CONFIG_SYS_TEXT_BASE = 0x00000000 diff --git a/board/lpd7a40x/flash.c b/board/lpd7a40x/flash.c deleted file mode 100644 index f5c07135dc..0000000000 --- a/board/lpd7a40x/flash.c +++ /dev/null @@ -1,490 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* #define DEBUG */ - -#include <common.h> -#include <environment.h> - -#define FLASH_BANK_SIZE 0x1000000 /* 16MB (2 x 8 MB) */ -#define MAIN_SECT_SIZE 0x40000 /* 256KB (2 x 128kB) */ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - - -#define CMD_READ_ARRAY 0x00FF00FF -#define CMD_IDENTIFY 0x00900090 -#define CMD_ERASE_SETUP 0x00200020 -#define CMD_ERASE_CONFIRM 0x00D000D0 -#define CMD_PROGRAM 0x00400040 -#define CMD_RESUME 0x00D000D0 -#define CMD_SUSPEND 0x00B000B0 -#define CMD_STATUS_READ 0x00700070 -#define CMD_STATUS_RESET 0x00500050 - -#define BIT_BUSY 0x00800080 -#define BIT_ERASE_SUSPEND 0x00400040 -#define BIT_ERASE_ERROR 0x00200020 -#define BIT_PROGRAM_ERROR 0x00100010 -#define BIT_VPP_RANGE_ERROR 0x00080008 -#define BIT_PROGRAM_SUSPEND 0x00040004 -#define BIT_PROTECT_ERROR 0x00020002 -#define BIT_UNDEFINED 0x00010001 - -#define BIT_SEQUENCE_ERROR 0x00300030 -#define BIT_TIMEOUT 0x80000000 - -/*----------------------------------------------------------------------- - */ - -ulong flash_init (void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - - flash_info[i].flash_id = - (INTEL_MANUFACT & FLASH_VENDMASK) | - (INTEL_ID_28F640J3A & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - if (i == 0) - flashbase = CONFIG_SYS_FLASH_BASE; - else - panic ("configured too many flash banks!\n"); - for (j = 0; j < flash_info[i].sector_count; j++) { - flash_info[i].start[j] = flashbase; - - /* uniform sector size */ - flashbase += MAIN_SECT_SIZE; - } - size += flash_info[i].size; - } - - /* - * Protect monitor and environment sectors - */ - flash_protect ( FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect ( FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, &flash_info[0]); - -#ifdef CONFIG_ENV_ADDR_REDUND - flash_protect ( FLAG_PROTECT_SET, - CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); -#endif - - return size; -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (INTEL_MANUFACT & FLASH_VENDMASK): - printf ("Intel: "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (INTEL_ID_28F640J3A & FLASH_TYPEMASK): - printf ("2x 28F640J3A (64Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - return; - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - -int flash_error (ulong code) -{ - /* Check bit patterns */ - /* SR.7=0 is busy, SR.7=1 is ready */ - /* all other flags indicate error on 1 */ - /* SR.0 is undefined */ - /* Timeout is our faked flag */ - - /* sequence is described in Intel 290644-005 document */ - - /* check Timeout */ - if (code & BIT_TIMEOUT) { - puts ("Timeout\n"); - return ERR_TIMOUT; - } - - /* check Busy, SR.7 */ - if (~code & BIT_BUSY) { - puts ("Busy\n"); - return ERR_PROG_ERROR; - } - - /* check Vpp low, SR.3 */ - if (code & BIT_VPP_RANGE_ERROR) { - puts ("Vpp range error\n"); - return ERR_PROG_ERROR; - } - - /* check Device Protect Error, SR.1 */ - if (code & BIT_PROTECT_ERROR) { - puts ("Device protect error\n"); - return ERR_PROG_ERROR; - } - - /* check Command Seq Error, SR.4 & SR.5 */ - if (code & BIT_SEQUENCE_ERROR) { - puts ("Command seqence error\n"); - return ERR_PROG_ERROR; - } - - /* check Block Erase Error, SR.5 */ - if (code & BIT_ERASE_ERROR) { - puts ("Block erase error\n"); - return ERR_PROG_ERROR; - } - - /* check Program Error, SR.4 */ - if (code & BIT_PROGRAM_ERROR) { - puts ("Program error\n"); - return ERR_PROG_ERROR; - } - - /* check Block Erase Suspended, SR.6 */ - if (code & BIT_ERASE_SUSPEND) { - puts ("Block erase suspended\n"); - return ERR_PROG_ERROR; - } - - /* check Program Suspended, SR.2 */ - if (code & BIT_PROGRAM_SUSPEND) { - puts ("Program suspended\n"); - return ERR_PROG_ERROR; - } - - /* OK, no error */ - return ERR_OK; -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - ulong result, result1; - int iflag, prot, sect; - int rc = ERR_OK; - ulong start; - -#ifdef USE_920T_MMU - int cflag; -#endif - - debug ("flash_erase: s_first %d s_last %d\n", s_first, s_last); - - /* first look for protection bits */ - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != - (INTEL_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ -#ifdef USE_920T_MMU - cflag = dcache_status (); - dcache_disable (); -#endif - iflag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { - - debug ("Erasing sector %2d @ %08lX... ", - sect, info->start[sect]); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - if (info->protect[sect] == 0) { /* not protected */ - vu_long *addr = (vu_long *) (info->start[sect]); - ulong bsR7, bsR7_2, bsR5, bsR5_2; - - /* *addr = CMD_STATUS_RESET; */ - *addr = CMD_ERASE_SETUP; - *addr = CMD_ERASE_CONFIRM; - - /* wait until flash is ready */ - do { - /* check timeout */ - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - *addr = CMD_STATUS_RESET; - result = BIT_TIMEOUT; - break; - } - - *addr = CMD_STATUS_READ; - result = *addr; - bsR7 = result & (1 << 7); - bsR7_2 = result & (1 << 23); - } while (!bsR7 | !bsR7_2); - - *addr = CMD_STATUS_READ; - result1 = *addr; - bsR5 = result1 & (1 << 5); - bsR5_2 = result1 & (1 << 21); -#ifdef SAMSUNG_FLASH_DEBUG - printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2); - if (bsR5 != 0 && bsR5_2 != 0) - printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2); -#endif - - *addr = CMD_READ_ARRAY; - *addr = CMD_RESUME; - - if ((rc = flash_error (result)) != ERR_OK) - goto outahere; -#if 0 - printf ("ok.\n"); - } else { /* it was protected */ - - printf ("protected!\n"); -#endif - } - } - -outahere: - /* allow flash to settle - wait 10 ms */ - udelay_masked (10000); - - if (iflag) - enable_interrupts (); - -#ifdef USE_920T_MMU - if (cflag) - dcache_enable (); -#endif - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash - */ - -static int write_word (flash_info_t * info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long *) dest; - ulong result; - int rc = ERR_OK; - int iflag; - ulong start; - -#ifdef USE_920T_MMU - int cflag; -#endif - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ -#ifdef USE_920T_MMU - cflag = dcache_status (); - dcache_disable (); -#endif - iflag = disable_interrupts (); - - /* *addr = CMD_STATUS_RESET; */ - *addr = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait until flash is ready */ - do { - /* check timeout */ - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - *addr = CMD_SUSPEND; - result = BIT_TIMEOUT; - break; - } - - *addr = CMD_STATUS_READ; - result = *addr; - } while (~result & BIT_BUSY); - - /* *addr = CMD_READ_ARRAY; */ - *addr = CMD_STATUS_READ; - result = *addr; - - rc = flash_error (result); - - if (iflag) - enable_interrupts (); - -#ifdef USE_920T_MMU - if (cflag) - dcache_enable (); -#endif - *addr = CMD_READ_ARRAY; - *addr = CMD_RESUME; - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash. - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int l; - int i, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 24); - } - for (; i < 4 && cnt > 0; ++i) { - data = (data >> 8) | (*src++ << 24); - --cnt; - ++cp; - } - for (; cnt == 0 && i < 4; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 24); - } - - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = *((vu_long *) src); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 4; - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return ERR_OK; - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 24); - --cnt; - } - for (; i < 4; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 24); - } - - return write_word (info, wp, data); -} diff --git a/board/lpd7a40x/lowlevel_init.S b/board/lpd7a40x/lowlevel_init.S deleted file mode 100644 index de34fc6f04..0000000000 --- a/board/lpd7a40x/lowlevel_init.S +++ /dev/null @@ -1,212 +0,0 @@ -/* - * Memory Setup - initialize memory controller(s) for devices required - * to boot and relocate - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include <config.h> -#include <version.h> - - -/* memory controller */ -#define BCRX_DEFAULT (0x0000fbe0) -#define BCRX_MW_8 (0x00000000) -#define BCRX_MW_16 (0x10000000) -#define BCRX_MW_32 (0x20000000) -#define BCRX_PME (0x08000000) -#define BCRX_WP (0x04000000) -#define BCRX_WST2_SHIFT (11) -#define BCRX_WST1_SHIFT (5) -#define BCRX_IDCY_SHIFT (0) - -/* Bank0 Async Flash */ -#define BCR0 (0x80002000) -#define BCR0_FLASH (BCRX_MW_32 | (0x08<<BCRX_WST2_SHIFT) | (0x0E<<BCRX_WST1_SHIFT)) - -/* Bank1 Open */ -#define BCR1 (0x80002004) - -/* Bank2 Not used (EEPROM?) */ -#define BCR2 (0x80002008) - -/* Bank3 Not used */ -#define BCR3 (0x8000200C) - -/* Bank4 PC Card1 */ - -/* Bank5 PC Card2 */ - -/* Bank6 CPLD IO Controller Peripherals (slow) */ -#define BCR6 (0x80002018) -#define BCR6_CPLD_SLOW (BCRX_DEFAULT | BCRX_MW_16) - -/* Bank7 CPLD IO Controller Peripherals (fast) */ -#define BCR7 (0x8000201C) -#define BCR7_CPLD_FAST (BCRX_MW_16 | (0x16<<BCRX_WST2_SHIFT) | (0x16<<BCRX_WST1_SHIFT) | (0x2<<BCRX_IDCY_SHIFT)) - -/* SDRAM */ -#define GBLCNFG (0x80002404) -#define GC_CKE (0x80000000) -#define GC_CKSD (0x40000000) -#define GC_LCR (0x00000040) -#define GC_SMEMBURST (0x00000020) -#define GC_MRS (0x00000002) -#define GC_INIT (0x00000001) - -#define GC_CMD_NORMAL (GC_CKE) -#define GC_CMD_MODE (GC_CKE | GC_MRS) -#define GC_CMD_SYNCFLASH_LOAD (GC_CKE | GC_MRS | GC_LCR) -#define GC_CMD_PRECHARGEALL (GC_CKE | GC_INIT) -#define GC_CMD_NOP (GC_CKE | GC_INIT | GC_MRS) - -#define RFSHTMR (0x80002408) -#define RFSHTMR_INIT (10) /* period=100 ns, HCLK=100Mhz, (2048+1-15.6*66) */ -#define RFSHTMR_NORMAL (1500) /* period=15.6 us, HCLK=100Mhz, (2048+1-15.6*66) */ - -#define SDCSCX_BASE (0x80002410) -#define SDCSCX_DEFAULT (0x01220008) -#define SDCSCX_AUTOPC (0x01000000) -#define SDCSCX_RAS2CAS_2 (0x00200000) -#define SDCSCX_RAS2CAS_3 (0x00300000) -#define SDCSCX_WBL (0x00080000) -#define SDCSCX_CASLAT_8 (0x00070000) -#define SDCSCX_CASLAT_7 (0x00060000) -#define SDCSCX_CASLAT_6 (0x00050000) -#define SDCSCX_CASLAT_5 (0x00040000) -#define SDCSCX_CASLAT_4 (0x00030000) -#define SDCSCX_CASLAT_3 (0x00020000) -#define SDCSCX_CASLAT_2 (0x00010000) -#define SDCSCX_2KPAGE (0x00000040) -#define SDCSCX_SROMLL (0x00000020) -#define SDCSCX_SROM512 (0x00000010) -#define SDCSCX_4BNK (0x00000008) -#define SDCSCX_2BNK (0x00000000) -#define SDCSCX_EBW_16 (0x00000004) -#define SDCSCX_EBW_32 (0x00000000) - -#define SDRAM_BASE (0xC0000000) -#define SDCSC_BANK_OFFSET (0x10000000) - -/* - * The SDRAM DEVICE MODE PROGRAMMING VALUE - */ -#define BURST_LENGTH_4 (2 << 10) -#define BURST_LENGTH_8 (3 << 10) -#define WBURST_LENGTH_BL (0 << 19) -#define WBURST_LENGTH_SINGLE (1 << 19) -#define CAS_2 (2 << 14) -#define CAS_3 (3 << 14) -#define BAT_SEQUENTIAL (0 << 13) -#define BAT_INTERLEAVED (1 << 13) -#define OPM_NORMAL (0 << 17) -#define SDRAM_DEVICE_MODE (WBURST_LENGTH_BL|OPM_NORMAL|CAS_3|BAT_SEQUENTIAL|BURST_LENGTH_4) - - -#define TIMER1_BASE (0x80000C00) - -/* - * special lookup flags - */ -#define DO_MEM_DELAY 1 -#define DO_MEM_READ 2 - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - -.globl lowlevel_init -lowlevel_init: - mov r9, lr @ save return address - - /* memory control configuration */ - /* make r0 relative the current location so that it */ - /* reads INITMEM_DATA out of FLASH rather than memory ! */ - /* r0 = current word pointer */ - /* r1 = end word location, one word past last actual word */ - /* r3 = address for writes, special lookup flags */ - /* r4 = value for writes, delay constants, or read addresses */ - /* r2 = location for mem reads */ - - ldr r0, =INITMEM_DATA - ldr r1, _TEXT_BASE - sub r0, r0, r1 - add r1, r0, #112 - -mem_loop: - cmp r1, r0 - moveq pc, r9 @ Done - - ldr r3, [r0], #4 @ Fetch Destination Register Address, or 1 for delay - ldr r4, [r0], #4 @ value - - cmp r3, #DO_MEM_DELAY - bleq mem_delay - beq mem_loop - cmp r3, #DO_MEM_READ - ldreq r2, [r4] - beq mem_loop - str r4, [r3] @ normal register/ram store - b mem_loop - -mem_delay: - ldr r5, =TIMER1_BASE - mov r6, r4, LSR #1 @ timer resolution is ~2us - str r6, [r5] - mov r6, #0x88 @ using 508.469KHz clock, enable - str r6, [r5, #8] -0: ldr r6, [r5, #4] @ timer value - cmp r6, #0 - bne 0b - mov r6, #0 @ disable timer - str r6, [r5, #8] - mov pc, lr - - .ltorg -/* the literal pools origin */ - -INITMEM_DATA: - .word BCR0 - .word BCR0_FLASH - .word BCR6 - .word BCR6_CPLD_SLOW - .word BCR7 - .word BCR7_CPLD_FAST - .word SDCSCX_BASE - .word (SDCSCX_RAS2CAS_3 | SDCSCX_CASLAT_3 | SDCSCX_SROMLL | SDCSCX_4BNK | SDCSCX_EBW_32) - .word GBLCNFG - .word GC_CMD_NOP - .word DO_MEM_DELAY - .word 200 - .word GBLCNFG - .word GC_CMD_PRECHARGEALL - .word RFSHTMR - .word RFSHTMR_INIT - .word DO_MEM_DELAY - .word 8 - .word RFSHTMR - .word RFSHTMR_NORMAL - .word GBLCNFG - .word GC_CMD_MODE - .word DO_MEM_READ - .word (SDRAM_BASE | SDRAM_DEVICE_MODE) - .word GBLCNFG - .word GC_CMD_NORMAL - .word SDCSCX_BASE - .word (SDCSCX_AUTOPC | SDCSCX_RAS2CAS_3 | SDCSCX_CASLAT_3 | SDCSCX_SROMLL | SDCSCX_4BNK | SDCSCX_EBW_32) diff --git a/board/lpd7a40x/lpd7a40x.c b/board/lpd7a40x/lpd7a40x.c deleted file mode 100644 index 437dad0388..0000000000 --- a/board/lpd7a40x/lpd7a40x.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#if defined(CONFIG_LH7A400) -#include <lh7a400.h> -#elif defined(CONFIG_LH7A404) -#include <lh7a404.h> -#else -#error "No CPU defined!" -#endif -#include <asm/mach-types.h> - -#include <lpd7a400_cpld.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* set up the I/O ports */ - - /* enable flash programming */ - *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_FLASH_REG)) |= FLASH_FPEN; - - /* Auto wakeup, LCD disable, WLAN enable */ - *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_CECTL_REG)) &= - ~(CECTL_AWKP|CECTL_LCDV|CECTL_WLPE); - - /* Status LED 2 on (leds are active low) */ - *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_EXTGPIO_REG)) = - (EXTGPIO_STATUS1|EXTGPIO_GPIO1) & ~(EXTGPIO_STATUS2); - -#if defined(CONFIG_LH7A400) - /* arch number of Logic-Board - MACH_TYPE_LPD7A400 */ - gd->bd->bi_arch_number = MACH_TYPE_LPD7A400; -#elif defined(CONFIG_LH7A404) - /* arch number of Logic-Board - MACH_TYPE_LPD7A400 */ - gd->bd->bi_arch_number = MACH_TYPE_LPD7A404; -#endif - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xc0000100; - - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/board/lubbock/flash.c b/board/lubbock/flash.c index 1ea2893fd0..e1e7807bc1 100644 --- a/board/lubbock/flash.c +++ b/board/lubbock/flash.c @@ -408,7 +408,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer(start)) > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/m501sk/Makefile b/board/m501sk/Makefile deleted file mode 100644 index 439e99f673..0000000000 --- a/board/m501sk/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := m501sk.o eeprom.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/m501sk/config.mk b/board/m501sk/config.mk deleted file mode 100644 index 207769233e..0000000000 --- a/board/m501sk/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x21f00000 diff --git a/board/m501sk/eeprom.c b/board/m501sk/eeprom.c deleted file mode 100644 index d1a46f348b..0000000000 --- a/board/m501sk/eeprom.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Add by Alan Lu, 07-29-2005 - * For ATMEL AT24C16 EEPROM - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <i2c.h> -#ifdef CONFIG_SYS_EEPROM_AT24C16 -#undef DEBUG - -void eeprom_init(void) -{ -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); -#endif -} - -int eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer, - unsigned cnt) -{ - int page, count = 0, i = 0; - page = offset / 0x100; - i = offset % 0x100; - - while (count < cnt) { - if (i2c_read(dev_addr|page, i++, 1, buffer+count++, 1) != 0) - return 1; - if (i > 0xff) { - page++; - i = 0; - } - } - - return 0; -} - -/* - * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is - * 0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM. - * - * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is - * 0x00000nxx for EEPROM address selectors and page number at n. - */ -int eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, - unsigned cnt) -{ - int page, i = 0, count = 0; - - page = offset / 0x100; - i = offset % 0x100; - - while (count < cnt) { - if (i2c_write(dev_addr|page, i++, 1, buffer+count++, 1) != 0) - return 1; - if (i > 0xff) { - page++; - i = 0; - } - } - -#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS) - udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000); -#endif - - return 0; -} - -#ifndef CONFIG_SPI -int eeprom_probe(unsigned dev_addr, unsigned offset) -{ - unsigned char chip; - - /* Probe the chip address */ -#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X) - chip = offset >> 8; /* block number */ -#else - chip = offset >> 16; /* block number */ -#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */ - - chip |= dev_addr; /* insert device address */ - return (i2c_probe(chip)); -} -#endif -#endif diff --git a/board/m501sk/m501sk.c b/board/m501sk/m501sk.c deleted file mode 100644 index c9957684b1..0000000000 --- a/board/m501sk/m501sk.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * (C) Copyright 2008 - * Based on modifications by Alan Lu / Artila - * Author : Timo Tuunainen / Sysart - Kimmo Leppala / Sysart - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <netdev.h> -#if defined(CONFIG_DRIVER_ETHER) -#include <at91rm9200_net.h> -#include <dm9161.h> -#endif - -#include "m501sk.h" -#include "net.h" - -#ifdef CONFIG_M501SK - -void m501sk_gpio_init(void) -{ - AT91C_BASE_PIOD->PIO_PER = 1 << (M501SK_DEBUG_LED1 - 96) | - 1 << (M501SK_DEBUG_LED2 - 96) | 1 << (M501SK_DEBUG_LED3 - 96) | - 1 << (M501SK_DEBUG_LED4 - 96) | 1 << (M501SK_READY_LED - 96); - - AT91C_BASE_PIOD->PIO_OER = 1 << (M501SK_DEBUG_LED1 - 96) | - 1 << (M501SK_DEBUG_LED2 - 96) | 1 << (M501SK_DEBUG_LED3 - 96) | - 1 << (M501SK_DEBUG_LED4 - 96) | 1 << (M501SK_READY_LED - 96); - - AT91C_BASE_PIOD->PIO_SODR = 1 << (M501SK_READY_LED - 96); - AT91C_BASE_PIOD->PIO_CODR = 1 << (M501SK_DEBUG_LED3 - 96); - AT91C_BASE_PIOB->PIO_PER = 1 << (M501SK_BUZZER - 32); - AT91C_BASE_PIOB->PIO_OER = 1 << (M501SK_BUZZER - 32); - AT91C_BASE_PIOC->PIO_PDR = (1 << 7) | (1 << 8); - - /* Power OFF all USART's LEDs */ - AT91C_BASE_PIOA->PIO_PER = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 | - AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \ - AT91C_PA23_TXD2; - - AT91C_BASE_PIOA->PIO_OER = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 | - AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \ - AT91C_PA23_TXD2; - - AT91C_BASE_PIOA->PIO_SODR = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 | - AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \ - AT91C_PA23_TXD2; - - AT91C_BASE_PIOB->PIO_PER = AT91C_PB20_RXD1 | AT91C_PB21_TXD1; - AT91C_BASE_PIOB->PIO_OER = AT91C_PB20_RXD1 | AT91C_PB21_TXD1; - AT91C_BASE_PIOB->PIO_SODR = AT91C_PB20_RXD1 | AT91C_PB21_TXD1; -} - -uchar m501sk_gpio_set(M501SK_PIO io) -{ - uchar status = 0xff; - switch (io) { - case M501SK_DEBUG_LED1: - case M501SK_DEBUG_LED2: - case M501SK_DEBUG_LED3: - case M501SK_DEBUG_LED4: - case M501SK_READY_LED: - AT91C_BASE_PIOD->PIO_SODR = 1 << (io - 96); - status = AT91C_BASE_PIOD->PIO_ODSR & (1 << (io - 96)); - break; - case M501SK_BUZZER: - AT91C_BASE_PIOB->PIO_SODR = 1 << (io - 32); - status = AT91C_BASE_PIOB->PIO_ODSR & (1 << (io - 32)); - break; - } - return status; -} - -uchar m501sk_gpio_clear(M501SK_PIO io) -{ - uchar status = 0xff; - switch (io) { - case M501SK_DEBUG_LED1: - case M501SK_DEBUG_LED2: - case M501SK_DEBUG_LED3: - case M501SK_DEBUG_LED4: - case M501SK_READY_LED: - AT91C_BASE_PIOD->PIO_CODR = 1 << (io - 96); - status = AT91C_BASE_PIOD->PIO_ODSR & (1 << (io - 96)); - break; - case M501SK_BUZZER: - AT91C_BASE_PIOB->PIO_CODR = 1 << (io - 32); - status = AT91C_BASE_PIOB->PIO_ODSR & (1 << (io - 32)); - break; - } - return status; -} - -/* - * Miscelaneous platform dependent initialisations - */ -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - /* Enable Ctrlc */ - console_init_f(); - - /* Correct IRDA resistor problem */ - /* Set PA23_TXD in Output */ - ((AT91PS_PIO)AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2; - - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - gd->bd->bi_arch_number = MACH_TYPE_M501; - /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - m501sk_gpio_init(); - - /* Do interrupt init here, because flash needs timers */ - timer_init(); - flash_init(); - - return 0; -} - -int dram_init(void) -{ - int i = 0; - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; - - for (i = 0; i < 500; i++) { - m501sk_gpio_clear(M501SK_DEBUG_LED3); - m501sk_gpio_clear(M501SK_BUZZER); - udelay(250); - m501sk_gpio_set(M501SK_DEBUG_LED3); - m501sk_gpio_set(M501SK_BUZZER); - udelay(80); - } - m501sk_gpio_clear(M501SK_BUZZER); - m501sk_gpio_clear(M501SK_DEBUG_LED3); - - return 0; -} - -int board_late_init(void) -{ -#if defined(CONFIG_CMD_NET) - eth_init(gd->bd); - eth_halt(); -#endif - - /* Protect U-Boot, kernel & ramdisk memory addresses */ - run_command("protect on 10000000 1041ffff", 0); - return 0; -} - -#ifdef CONFIG_DRIVER_ETHER -#if defined(CONFIG_CMD_NET) -/* - * Name: - * at91rm9200_GetPhyInterface - * Description: - * Initialise the interface functions to the PHY - * Arguments: - * None - * Return value: - * None - */ -void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops) -{ - p_phyops->Init = dm9161_InitPhy; - p_phyops->IsPhyConnected = dm9161_IsPhyConnected; - p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed; - p_phyops->AutoNegotiate = dm9161_AutoNegotiate; -} -#endif /* CONFIG_CMD_NET */ -#endif /* CONFIG_DRIVER_ETHER */ - -#ifdef CONFIG_DRIVER_AT91EMAC -int board_eth_init(bd_t *bis) -{ - int rc = 0; - rc = at91emac_register(bis, 0); - return rc; -} -#endif -#endif /* CONFIG_M501SK */ diff --git a/board/m501sk/m501sk.h b/board/m501sk/m501sk.h deleted file mode 100644 index 51d10f58a9..0000000000 --- a/board/m501sk/m501sk.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - * linux/include/asm/arch-at91/hardware.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __M501SK_H -#define __M501SK_H - -#ifndef __ASSEMBLY__ -#include <asm/arch-at91rm9200/AT91RM9200.h> -#else -#include <asm/arch-at91rm9200/AT91RM9200_inc.h> -#endif - -#define AT91C_PIO_PA22 ((unsigned int) 1 << 22) /* Pin Controlled by PA22 */ -#define AT91C_PA22_RXD2 ((unsigned int) AT91C_PIO_PA22) /* USART 2 RxD */ -#define AT91C_PA5_TXD3 ((unsigned int) 1 << 5) /* USART 3 TxD */ -#define AT91C_PA6_RXD3 ((unsigned int) 1 << 6) /* USART 3 RxD */ - -/* ========== Register definition for PIOD peripheral ========== */ -#define AT91C_PIOD_PDSR ((AT91_REG *) 0xFFFFFA3C) /* Pin Data stat Reg */ -#define AT91C_PIOD_CODR ((AT91_REG *) 0xFFFFFA34) /* Clear Output Data Reg */ -#define AT91C_PIOD_OWER ((AT91_REG *) 0xFFFFFAA0) /* Output Write Enable Reg */ -#define AT91C_PIOD_MDER ((AT91_REG *) 0xFFFFFA50) /* Multi-driver Enable Reg */ -#define AT91C_PIOD_IMR ((AT91_REG *) 0xFFFFFA48) /* Interrupt Mask Reg */ -#define AT91C_PIOD_IER ((AT91_REG *) 0xFFFFFA40) /* Interrupt Enable Reg */ -#define AT91C_PIOD_ODSR ((AT91_REG *) 0xFFFFFA38) /* Output Data stat Reg */ -#define AT91C_PIOD_SODR ((AT91_REG *) 0xFFFFFA30) /* Set Output Data Reg */ -#define AT91C_PIOD_PER ((AT91_REG *) 0xFFFFFA00) /* PIO Enable Reg */ -#define AT91C_PIOD_OWDR ((AT91_REG *) 0xFFFFFAA4) /* Output Write Disable Reg */ -#define AT91C_PIOD_PPUER ((AT91_REG *) 0xFFFFFA64) /* Pull-up Enable Reg */ -#define AT91C_PIOD_MDDR ((AT91_REG *) 0xFFFFFA54) /* Multi-driver Disable Reg */ -#define AT91C_PIOD_ISR ((AT91_REG *) 0xFFFFFA4C) /* Interrupt stat Reg */ -#define AT91C_PIOD_IDR ((AT91_REG *) 0xFFFFFA44) /* Interrupt Disable Reg */ -#define AT91C_PIOD_PDR ((AT91_REG *) 0xFFFFFA04) /* PIO Disable Reg */ -#define AT91C_PIOD_ODR ((AT91_REG *) 0xFFFFFA14) /* Output Disable Regr */ -#define AT91C_PIOD_OWSR ((AT91_REG *) 0xFFFFFAA8) /* Output Write stat Reg */ -#define AT91C_PIOD_ABSR ((AT91_REG *) 0xFFFFFA78) /* AB Select stat Reg */ -#define AT91C_PIOD_ASR ((AT91_REG *) 0xFFFFFA70) /* Select A Reg */ -#define AT91C_PIOD_PPUSR ((AT91_REG *) 0xFFFFFA68) /* Pad Pull-up stat Reg */ -#define AT91C_PIOD_PPUDR ((AT91_REG *) 0xFFFFFA60) /* Pull-up Disable Reg */ -#define AT91C_PIOD_MDSR ((AT91_REG *) 0xFFFFFA58) /* Multi-driver stat Reg */ -#define AT91C_PIOD_PSR ((AT91_REG *) 0xFFFFFA08) /* PIO stat Reg */ -#define AT91C_PIOD_OER ((AT91_REG *) 0xFFFFFA10) /* Output Enable Reg */ -#define AT91C_PIOD_OSR ((AT91_REG *) 0xFFFFFA18) /* Output stat Reg */ -#define AT91C_PIOD_IFER ((AT91_REG *) 0xFFFFFA20) /* Input Filter Enable Reg */ -#define AT91C_PIOD_BSR ((AT91_REG *) 0xFFFFFA74) /* Select B Reg */ -#define AT91C_PIOD_IFDR ((AT91_REG *) 0xFFFFFA24) /* Input Filter Disable Reg */ -#define AT91C_PIOD_IFSR ((AT91_REG *) 0xFFFFFA28) /* Input Filter stat Reg */ - -#define AT91C_PIO_PD0 ((unsigned int) 1 << 0) /* Pin Controlled by PD0 */ -#define AT91C_PD0_ETX0 ((unsigned int) AT91C_PIO_PD0) /* Enet MAC Tx Data 0*/ -#define AT91C_PIO_PD1 ((unsigned int) 1 << 1) /* Pin Controlled by PD1 */ -#define AT91C_PD1_ETX1 ((unsigned int) AT91C_PIO_PD1) /* Enet MAC Tx Data 1*/ -#define AT91C_PIO_PD10 ((unsigned int) 1 << 10) /* Pin Controlled by PD10 */ -#define AT91C_PD10_PCK3 ((unsigned int) AT91C_PIO_PD10) /* PMC Prog Clk Oput 3*/ -#define AT91C_PD10_TPS1 ((unsigned int) AT91C_PIO_PD10) /* ETMARM9 pl stat1 */ -#define AT91C_PIO_PD11 ((unsigned int) 1 << 11) /* Pin Controlled by PD11 */ -#define AT91C_PD11_ ((unsigned int) AT91C_PIO_PD11) /* */ -#define AT91C_PD11_TPS2 ((unsigned int) AT91C_PIO_PD11) /* ETMARM9 pl stat2 */ -#define AT91C_PIO_PD12 ((unsigned int) 1 << 12) /* Pin Controlled by PD12 */ -#define AT91C_PD12_ ((unsigned int) AT91C_PIO_PD12) /* */ -#define AT91C_PD12_TPK0 ((unsigned int) AT91C_PIO_PD12) /* ETM Trace Pkt 0 */ -#define AT91C_PIO_PD13 ((unsigned int) 1 << 13) /* Pin Controlled by PD13 */ -#define AT91C_PD13_ ((unsigned int) AT91C_PIO_PD13) /* */ -#define AT91C_PD13_TPK1 ((unsigned int) AT91C_PIO_PD13) /* ETM Trace Pkt 1 */ -#define AT91C_PIO_PD14 ((unsigned int) 1 << 14) /* Pin Controlled by PD14 */ -#define AT91C_PD14_ ((unsigned int) AT91C_PIO_PD14) /* */ -#define AT91C_PD14_TPK2 ((unsigned int) AT91C_PIO_PD14) /* ETM Trace Pkt 2 */ -#define AT91C_PIO_PD15 ((unsigned int) 1 << 15) /* Pin Controlled by PD15 */ -#define AT91C_PD15_TD0 ((unsigned int) AT91C_PIO_PD15) /* SSC TxD */ -#define AT91C_PD15_TPK3 ((unsigned int) AT91C_PIO_PD15) /* ETM Trace Pkt 3 */ -#define AT91C_PIO_PD16 ((unsigned int) 1 << 16) /* Pin Controlled by PD16 */ -#define AT91C_PD16_TD1 ((unsigned int) AT91C_PIO_PD16) /* SSC TxD 1 */ -#define AT91C_PD16_TPK4 ((unsigned int) AT91C_PIO_PD16) /* ETM Trace Pkt 4 */ -#define AT91C_PIO_PD17 ((unsigned int) 1 << 17) /* Pin Controlled by PD17 */ -#define AT91C_PD17_TD2 ((unsigned int) AT91C_PIO_PD17) /* SSC TxD 2 */ -#define AT91C_PD17_TPK5 ((unsigned int) AT91C_PIO_PD17) /* ETM Trace Pkt 5 */ -#define AT91C_PIO_PD18 ((unsigned int) 1 << 18) /* Pin Controlled by PD18 */ -#define AT91C_PD18_NPCS1 ((unsigned int) AT91C_PIO_PD18) /* SPI Perip CS 1 */ -#define AT91C_PD18_TPK6 ((unsigned int) AT91C_PIO_PD18) /* ETM Trace Pkt 6 */ -#define AT91C_PIO_PD19 ((unsigned int) 1 << 19) /* Pin Controlled by PD19 */ -#define AT91C_PD19_NPCS2 ((unsigned int) AT91C_PIO_PD19) /* SPI Perip CS 2 */ -#define AT91C_PD19_TPK7 ((unsigned int) AT91C_PIO_PD19) /* ETM Trace Pkt 7 */ -#define AT91C_PIO_PD2 ((unsigned int) 1 << 2) /* Pin Controlled by PD2 */ -#define AT91C_PD2_ETX2 ((unsigned int) AT91C_PIO_PD2) /* Ethernet MAC TxD 2 */ -#define AT91C_PIO_PD20 ((unsigned int) 1 << 20) /* Pin Controlled by PD20 */ -#define AT91C_PD20_NPCS3 ((unsigned int) AT91C_PIO_PD20) /* SPI Perip CS 3 */ -#define AT91C_PD20_TPK8 ((unsigned int) AT91C_PIO_PD20) /* ETM Trace Pkt 8 */ -#define AT91C_PIO_PD21 ((unsigned int) 1 << 21) /* Pin Controlled by PD21 */ -#define AT91C_PD21_RTS0 ((unsigned int) AT91C_PIO_PD21) /* Usart 0 RTS */ -#define AT91C_PD21_TPK9 ((unsigned int) AT91C_PIO_PD21) /* ETM Trace Pkt 9 */ -#define AT91C_PIO_PD22 ((unsigned int) 1 << 22) /* Pin Controlled by PD22 */ -#define AT91C_PD22_RTS1 ((unsigned int) AT91C_PIO_PD22) /* Usart 0 RTS */ -#define AT91C_PD22_TPK10 ((unsigned int) AT91C_PIO_PD22) /* ETM Trace Pkt 10 */ -#define AT91C_PIO_PD23 ((unsigned int) 1 << 23) /* Pin Controlled by PD23 */ -#define AT91C_PD23_RTS2 ((unsigned int) AT91C_PIO_PD23) /* USART 2 RTS */ -#define AT91C_PD23_TPK11 ((unsigned int) AT91C_PIO_PD23) /* ETM Trace Pkt 11 */ -#define AT91C_PIO_PD24 ((unsigned int) 1 << 24) /* Pin Controlled by PD24 */ -#define AT91C_PD24_RTS3 ((unsigned int) AT91C_PIO_PD24) /* USART 3 RTS */ -#define AT91C_PD24_TPK12 ((unsigned int) AT91C_PIO_PD24) /* ETM Trace Pkt 12 */ -#define AT91C_PIO_PD25 ((unsigned int) 1 << 25) /* Pin Controlled by PD25 */ -#define AT91C_PD25_DTR1 ((unsigned int) AT91C_PIO_PD25) /* USART 1 DTR */ -#define AT91C_PD25_TPK13 ((unsigned int) AT91C_PIO_PD25) /* ETM Trace Pkt 13 */ -#define AT91C_PIO_PD26 ((unsigned int) 1 << 26) /* Pin Controlled by PD26 */ -#define AT91C_PD26_TPK14 ((unsigned int) AT91C_PIO_PD26) /* ETM Trace Pkt 14 */ -#define AT91C_PIO_PD27 ((unsigned int) 1 << 27) /* Pin Controlled by PD27 */ -#define AT91C_PD27_TPK15 ((unsigned int) AT91C_PIO_PD27) /* ETM Trace Pkt 15 */ -#define AT91C_PIO_PD3 ((unsigned int) 1 << 3) /* Pin Controlled by PD3 */ -#define AT91C_PD3_ETX3 ((unsigned int) AT91C_PIO_PD3) /* Enet MAC TxD 3 */ -#define AT91C_PIO_PD4 ((unsigned int) 1 << 4) /* Pin Controlled by PD4 */ -#define AT91C_PD4_ETXEN ((unsigned int) AT91C_PIO_PD4) /* Enet MAC TxEn */ -#define AT91C_PIO_PD5 ((unsigned int) 1 << 5) /* Pin Controlled by PD5 */ -#define AT91C_PD5_ETXER ((unsigned int) AT91C_PIO_PD5) /* Enet MAC TxCE */ -#define AT91C_PIO_PD6 ((unsigned int) 1 << 6) /* Pin Controlled by PD6 */ -#define AT91C_PD6_DTXD ((unsigned int) AT91C_PIO_PD6) /* DBGU Debug TxD */ -#define AT91C_PIO_PD7 ((unsigned int) 1 << 7) /* Pin Controlled by PD7 */ -#define AT91C_PD7_PCK0 ((unsigned int) AT91C_PIO_PD7) /* PMC Prog Clk Oput 0*/ -#define AT91C_PD7_TSYNC ((unsigned int) AT91C_PIO_PD7) /* ETM Sync signal */ -#define AT91C_PIO_PD8 ((unsigned int) 1 << 8) /* Pin Controlled by PD8 */ -#define AT91C_PD8_PCK1 ((unsigned int) AT91C_PIO_PD8) /* PMC Prog Clk Oput 1*/ -#define AT91C_PD8_TCLK ((unsigned int) AT91C_PIO_PD8) /* ETM Trace Clk sig */ -#define AT91C_PIO_PD9 ((unsigned int) 1 << 9) /* Pin Controlled by PD9 */ -#define AT91C_PD9_PCK2 ((unsigned int) AT91C_PIO_PD9) /* PMC Prog Clk 2 */ -#define AT91C_PD9_TPS0 ((unsigned int) AT91C_PIO_PD9) /* ETM ARM9 pl stat0 */ -#define AT91C_PIO_PB6 ((unsigned int) 1 << 6) /* Pin Controlled by PB6 */ -#define AT91C_PIO_PC5 ((unsigned int) 1 << 5) -#define AT91C_PIO_PC14 ((unsigned int) 1 << 14) /* Pin Controlled by PC1 */ -#define AT91C_PIO_PC15 ((unsigned int) 1 << 15) /* Pin Controlled by PC1 */ -#define AT91C_PIO_PA19 ((unsigned int) 1 << 19) /* Pin Controlled by PC1 */ -#define AT91C_PIO_PB2 ((unsigned int) 1 << 2) /* Pin Controlled by PC1 */ -#define AT91C_PIO_PB8 ((unsigned int) 1 << 8) -#define AT91C_PIO_PB9 ((unsigned int) 1 << 9) -#define AT91C_PIO_PB10 ((unsigned int) 1 << 10) -#define AT91C_PIO_PB11 ((unsigned int) 1 << 11) -#define AT91C_PIO_PB17 ((unsigned int) 1 << 17) -#define AT91C_PIO_PB28 ((unsigned int) 1 << 28) -#define AT91C_PIO_PB29 ((unsigned int) 1 << 29) - -typedef enum { - M501SK_BUZZER = 38, - M501SK_DEBUG_LED1 = 96, - M501SK_DEBUG_LED2, - M501SK_DEBUG_LED3, - M501SK_DEBUG_LED4, - M501SK_READY_LED = 102, -} M501SK_PIO; - -void m501sk_gpio_init(void); -uchar m501sk_gpio_set(M501SK_PIO io); -uchar m501sk_gpio_clear(M501SK_PIO io); - -#endif diff --git a/board/mx1fs2/Makefile b/board/mx1fs2/Makefile deleted file mode 100644 index c55b695a51..0000000000 --- a/board/mx1fs2/Makefile +++ /dev/null @@ -1,51 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := mx1fs2.o flash.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/mx1fs2/config.mk b/board/mx1fs2/config.mk deleted file mode 100644 index eb4d046939..0000000000 --- a/board/mx1fs2/config.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -# This config file is used for compilation of IMX sources -# -# You might change location of U-Boot in memory by setting right CONFIG_SYS_TEXT_BASE. -# This allows for example having one copy located at the end of ram and stored -# in flash device and later on while developing use other location to test -# the code in RAM device only. -# - -CONFIG_SYS_TEXT_BASE = 0x08f00000 diff --git a/board/mx1fs2/flash.c b/board/mx1fs2/flash.c deleted file mode 100644 index da4ebe6e75..0000000000 --- a/board/mx1fs2/flash.c +++ /dev/null @@ -1,849 +0,0 @@ -/* - * (C) 2000-2004 Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * (C) 2003 August Hoeraendl, Logotronic GmbH - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#undef CONFIG_FLASH_16BIT - -#include <common.h> - -#define FLASH_BANK_SIZE MX1FS2_FLASH_BANK_SIZE -#define MAIN_SECT_SIZE MX1FS2_FLASH_SECT_SIZE - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* - * NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it - * has nothing to do with the flash chip being 8-bit or 16-bit. - */ -#ifdef CONFIG_FLASH_16BIT -typedef unsigned short FLASH_PORT_WIDTH; -typedef volatile unsigned short FLASH_PORT_WIDTHV; - -#define FLASH_ID_MASK 0xFFFF -#else -typedef unsigned long FLASH_PORT_WIDTH; -typedef volatile unsigned long FLASH_PORT_WIDTHV; - -#define FLASH_ID_MASK 0xFFFFFFFF -#endif - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define ORMASK(size) ((-size) & OR_AM_MSK) - -/*----------------------------------------------------------------------- - * Functions - */ -#if 0 -static ulong flash_get_size(FPWV * addr, flash_info_t * info); -static void flash_get_offsets(ulong base, flash_info_t * info); -#endif -static void flash_reset(flash_info_t * info); -static int write_word_intel(flash_info_t * info, FPWV * dest, FPW data); -static int write_word_amd(flash_info_t * info, FPWV * dest, FPW data); -#define write_word(in, de, da) write_word_amd(in, de, da) -#ifdef CONFIG_SYS_FLASH_PROTECTION -static void flash_sync_real_protect(flash_info_t * info); -#endif - -/*----------------------------------------------------------------------- - * flash_init() - * - * sets up flash_info and returns size of FLASH (bytes) - */ -ulong -flash_init(void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - flash_info[i].flash_id = - (FLASH_MAN_AMD & FLASH_VENDMASK) | - (FLASH_AM640U & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - switch (i) { - case 0: - flashbase = MX1FS2_FLASH_BASE; - break; - default: - panic("configured too many flash banks!\n"); - break; - } - for (j = 0; j < flash_info[i].sector_count; j++) { - flash_info[i].start[j] = flashbase + j * MAIN_SECT_SIZE; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start, - &flash_info[0]); - - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void -flash_reset(flash_info_t * info) -{ - FPWV *base = (FPWV *) (info->start[0]); - - /* Put FLASH back in read mode */ - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) - *base = (FPW) 0x00FF00FF; /* Intel Read Mode */ - else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) - *base = (FPW) 0x00F000F0; /* AMD Read Mode */ -} - -/*----------------------------------------------------------------------- - */ -#if 0 -static void -flash_get_offsets(ulong base, flash_info_t * info) -{ - int i; - - /* set up sector start address table */ - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL - && (info->flash_id & FLASH_BTYPE)) { - int bootsect_size; /* number of bytes/boot sector */ - int sect_size; /* number of bytes/regular sector */ - - bootsect_size = 0x00002000 * (sizeof (FPW) / 2); - sect_size = 0x00010000 * (sizeof (FPW) / 2); - - /* set sector offsets for bottom boot block type */ - for (i = 0; i < 8; ++i) { - info->start[i] = base + (i * bootsect_size); - } - for (i = 8; i < info->sector_count; i++) { - info->start[i] = base + ((i - 7) * sect_size); - } - } else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD - && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) { - - int sect_size; /* number of bytes/sector */ - - sect_size = 0x00010000 * (sizeof (FPW) / 2); - - /* set up sector start address table (uniform sector type) */ - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * sect_size); - } -} -#endif /* 0 */ - -/*----------------------------------------------------------------------- - */ - -void -flash_print_info(flash_info_t * info) -{ - int i; - uchar *boottype; - uchar *bootletter; - char *fmt; - uchar botbootletter[] = "B"; - uchar topbootletter[] = "T"; - uchar botboottype[] = "bottom boot sector"; - uchar topboottype[] = "top boot sector"; - - if (info->flash_id == FLASH_UNKNOWN) { - printf("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf("AMD "); - break; - case FLASH_MAN_BM: - printf("BRIGHT MICRO "); - break; - case FLASH_MAN_FUJ: - printf("FUJITSU "); - break; - case FLASH_MAN_SST: - printf("SST "); - break; - case FLASH_MAN_STM: - printf("STM "); - break; - case FLASH_MAN_INTEL: - printf("INTEL "); - break; - default: - printf("Unknown Vendor "); - break; - } - - /* check for top or bottom boot, if it applies */ - if (info->flash_id & FLASH_BTYPE) { - boottype = botboottype; - bootletter = botbootletter; - } else { - boottype = topboottype; - bootletter = topbootletter; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM640U: - fmt = "29LV641D (64 Mbit, uniform sectors)\n"; - break; - case FLASH_28F800C3B: - case FLASH_28F800C3T: - fmt = "28F800C3%s (8 Mbit, %s)\n"; - break; - case FLASH_INTEL800B: - case FLASH_INTEL800T: - fmt = "28F800B3%s (8 Mbit, %s)\n"; - break; - case FLASH_28F160C3B: - case FLASH_28F160C3T: - fmt = "28F160C3%s (16 Mbit, %s)\n"; - break; - case FLASH_INTEL160B: - case FLASH_INTEL160T: - fmt = "28F160B3%s (16 Mbit, %s)\n"; - break; - case FLASH_28F320C3B: - case FLASH_28F320C3T: - fmt = "28F320C3%s (32 Mbit, %s)\n"; - break; - case FLASH_INTEL320B: - case FLASH_INTEL320T: - fmt = "28F320B3%s (32 Mbit, %s)\n"; - break; - case FLASH_28F640C3B: - case FLASH_28F640C3T: - fmt = "28F640C3%s (64 Mbit, %s)\n"; - break; - case FLASH_INTEL640B: - case FLASH_INTEL640T: - fmt = "28F640B3%s (64 Mbit, %s)\n"; - break; - default: - fmt = "Unknown Chip Type\n"; - break; - } - - printf(fmt, bootletter, boottype); - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses:"); - - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) { - printf("\n "); - } - - printf(" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - - printf("\n"); -} - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -#if 0 -ulong -flash_get_size(FPWV * addr, flash_info_t * info) -{ - /* Write auto select command: read Manufacturer ID */ - - /* Write auto select command sequence and test FLASH answer */ - addr[0x0555] = (FPW) 0x00AA00AA; /* for AMD, Intel ignores this */ - addr[0x02AA] = (FPW) 0x00550055; /* for AMD, Intel ignores this */ - addr[0x0555] = (FPW) 0x00900090; /* selects Intel or AMD */ - - /* The manufacturer codes are only 1 byte, so just use 1 byte. - * This works for any bus width and any FLASH device width. - */ - switch (addr[0] & 0xff) { - - case (uchar) AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - - case (uchar) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - break; - } - - /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */ - if (info->flash_id != FLASH_UNKNOWN) - switch (addr[1]) { - - case (FPW) AMD_ID_LV640U: /* 29LV640 and 29LV641 have same ID */ - info->flash_id += FLASH_AM640U; - info->sector_count = 128; - info->size = 0x00800000 * (sizeof (FPW) / 2); - break; /* => 8 or 16 MB */ - - case (FPW) INTEL_ID_28F800C3B: - info->flash_id += FLASH_28F800C3B; - info->sector_count = 23; - info->size = 0x00100000 * (sizeof (FPW) / 2); - break; /* => 1 or 2 MB */ - - case (FPW) INTEL_ID_28F800B3B: - info->flash_id += FLASH_INTEL800B; - info->sector_count = 23; - info->size = 0x00100000 * (sizeof (FPW) / 2); - break; /* => 1 or 2 MB */ - - case (FPW) INTEL_ID_28F160C3B: - info->flash_id += FLASH_28F160C3B; - info->sector_count = 39; - info->size = 0x00200000 * (sizeof (FPW) / 2); - break; /* => 2 or 4 MB */ - - case (FPW) INTEL_ID_28F160B3B: - info->flash_id += FLASH_INTEL160B; - info->sector_count = 39; - info->size = 0x00200000 * (sizeof (FPW) / 2); - break; /* => 2 or 4 MB */ - - case (FPW) INTEL_ID_28F320C3B: - info->flash_id += FLASH_28F320C3B; - info->sector_count = 71; - info->size = 0x00400000 * (sizeof (FPW) / 2); - break; /* => 4 or 8 MB */ - - case (FPW) INTEL_ID_28F320B3B: - info->flash_id += FLASH_INTEL320B; - info->sector_count = 71; - info->size = 0x00400000 * (sizeof (FPW) / 2); - break; /* => 4 or 8 MB */ - - case (FPW) INTEL_ID_28F640C3B: - info->flash_id += FLASH_28F640C3B; - info->sector_count = 135; - info->size = 0x00800000 * (sizeof (FPW) / 2); - break; /* => 8 or 16 MB */ - - case (FPW) INTEL_ID_28F640B3B: - info->flash_id += FLASH_INTEL640B; - info->sector_count = 135; - info->size = 0x00800000 * (sizeof (FPW) / 2); - break; /* => 8 or 16 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* => no or unknown flash */ - } - - flash_get_offsets((ulong) addr, info); - - /* Put FLASH back in read mode */ - flash_reset(info); - - return (info->size); -} -#endif /* 0 */ - -#ifdef CONFIG_SYS_FLASH_PROTECTION -/*----------------------------------------------------------------------- - */ - -static void -flash_sync_real_protect(flash_info_t * info) -{ - FPWV *addr = (FPWV *) (info->start[0]); - FPWV *sect; - int i; - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F800C3B: - case FLASH_28F800C3T: - case FLASH_28F160C3B: - case FLASH_28F160C3T: - case FLASH_28F320C3B: - case FLASH_28F320C3T: - case FLASH_28F640C3B: - case FLASH_28F640C3T: - /* check for protected sectors */ - *addr = (FPW) 0x00900090; - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02. - * D0 = 1 for each device if protected. - * If at least one device is protected the sector is marked - * protected, but mixed protected and unprotected devices - * within a sector should never happen. - */ - sect = (FPWV *) (info->start[i]); - info->protect[i] = - (sect[2] & (FPW) (0x00010001)) ? 1 : 0; - } - - /* Put FLASH back in read mode */ - flash_reset(info); - break; - - case FLASH_AM640U: - default: - /* no hardware protect that we support */ - break; - } -} -#endif - -/*----------------------------------------------------------------------- - */ - -int -flash_erase(flash_info_t * info, int s_first, int s_last) -{ - FPWV *addr; - int flag, prot, sect; - int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL; - ulong start, now, last; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf("- missing\n"); - } else { - printf("- no sectors to erase\n"); - } - return 1; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_INTEL800B: - case FLASH_INTEL160B: - case FLASH_INTEL320B: - case FLASH_INTEL640B: - case FLASH_28F800C3B: - case FLASH_28F160C3B: - case FLASH_28F320C3B: - case FLASH_28F640C3B: - case FLASH_AM640U: - break; - case FLASH_UNKNOWN: - default: - printf("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf("\n"); - } - - start = get_timer(0); - last = start; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && rcode == 0; sect++) { - - if (info->protect[sect] != 0) /* protected, skip it */ - continue; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr = (FPWV *) (info->start[sect]); - if (intel) { - *addr = (FPW) 0x00500050; /* clear status register */ - *addr = (FPW) 0x00200020; /* erase setup */ - *addr = (FPW) 0x00D000D0; /* erase confirm */ - } else { - /* must be AMD style if not Intel */ - FPWV *base; /* first address in bank */ - - base = (FPWV *) (info->start[0]); - base[0x0555] = (FPW) 0x00AA00AA; /* unlock */ - base[0x02AA] = (FPW) 0x00550055; /* unlock */ - base[0x0555] = (FPW) 0x00800080; /* erase mode */ - base[0x0555] = (FPW) 0x00AA00AA; /* unlock */ - base[0x02AA] = (FPW) 0x00550055; /* unlock */ - *addr = (FPW) 0x00300030; /* erase sector */ - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 50us for AMD, 80us for Intel. - * Let's wait 1 ms. - */ - udelay(1000); - - while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) { - if ((now = get_timer(0)) - start > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - - if (intel) { - /* suspend erase */ - *addr = (FPW) 0x00B000B0; - } - - flash_reset(info); /* reset to read mode */ - rcode = 1; /* failed */ - break; - } - - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc('.'); - last = now; - } - } - - flash_reset(info); /* reset to read mode */ - } - - printf(" done\n"); - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int -bad_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */ - int bytes; /* number of bytes to program in current word */ - int left; /* number of bytes left to program */ - int i, res; - - for (left = cnt, res = 0; - left > 0 && res == 0; - addr += sizeof (data), left -= sizeof (data) - bytes) { - - bytes = addr & (sizeof (data) - 1); - addr &= ~(sizeof (data) - 1); - - /* combine source and destination data so can program - * an entire word of 16 or 32 bits - */ - for (i = 0; i < sizeof (data); i++) { - data <<= 8; - if (i < bytes || i - bytes >= left) - data += *((uchar *) addr + i); - else - data += *src++; - } - - /* write one word to the flash */ - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - res = write_word_amd(info, (FPWV *) addr, data); - break; - case FLASH_MAN_INTEL: - res = write_word_intel(info, (FPWV *) addr, data); - break; - default: - /* unknown flash type, error! */ - printf("missing or unknown FLASH type\n"); - res = 1; /* not really a timeout, but gives error */ - break; - } - } - - return (res); -} - -/** - * write_buf: - Copy memory to flash. - * - * @param info: - * @param src: source of copy transaction - * @param addr: where to copy to - * @param cnt: number of bytes to copy - * - * @return error code - */ - -int -write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - FPW data; - int l; - int i, rc; - - wp = (addr & ~1); /* get lower word aligned address */ - - /* handle unaligned start bytes */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - for (; i < 2 && cnt > 0; ++i) { - data = (data >> 8) | (*src++ << 8); - --cnt; - ++cp; - } - for (; cnt == 0 && i < 2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - - if ((rc = write_word(info, (FPWV *)wp, data)) != 0) { - return (rc); - } - wp += 2; - } - - /* handle word aligned part */ - while (cnt >= 2) { - /* data = *((vushort*)src); */ - data = *((FPW *) src); - if ((rc = write_word(info, (FPWV *)wp, data)) != 0) { - return (rc); - } - src += sizeof (FPW); - wp += sizeof (FPW); - cnt -= sizeof (FPW); - } - - if (cnt == 0) - return ERR_OK; - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 8); - --cnt; - } - for (; i < 2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - - return write_word(info, (FPWV *)wp, data); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash for AMD FLASH - * A word is 16 or 32 bits, whichever the bus width of the flash bank - * (not an individual chip) is. - * - * returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int -write_word_amd(flash_info_t * info, FPWV * dest, FPW data) -{ - ulong start; - int flag; - int res = 0; /* result, assume success */ - FPWV *base; /* first address in flash bank */ - - /* Check if Flash is (sufficiently) erased */ - if ((*dest & data) != data) { - return (2); - } - - base = (FPWV *) (info->start[0]); - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - base[0x0555] = (FPW) 0x00AA00AA; /* unlock */ - base[0x02AA] = (FPW) 0x00550055; /* unlock */ - base[0x0555] = (FPW) 0x00A000A0; /* selects program mode */ - - *dest = data; /* start programming the data */ - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer(0); - - /* data polling for D7 */ - while (res == 0 - && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) { - if (get_timer(0) - start > CONFIG_SYS_FLASH_WRITE_TOUT) { - *dest = (FPW) 0x00F000F0; /* reset bank */ - printf("SHA timeout\n"); - res = 1; - } - } - - return (res); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash for Intel FLASH - * A word is 16 or 32 bits, whichever the bus width of the flash bank - * (not an individual chip) is. - * - * returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int -write_word_intel(flash_info_t * info, FPWV * dest, FPW data) -{ - ulong start; - int flag; - int res = 0; /* result, assume success */ - - /* Check if Flash is (sufficiently) erased */ - if ((*dest & data) != data) { - return (2); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - *dest = (FPW) 0x00500050; /* clear status register */ - *dest = (FPW) 0x00FF00FF; /* make sure in read mode */ - *dest = (FPW) 0x00400040; /* program setup */ - - *dest = data; /* start programming the data */ - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer(0); - - while (res == 0 && (*dest & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *dest = (FPW) 0x00B000B0; /* Suspend program */ - res = 1; - } - } - - if (res == 0 && (*dest & (FPW) 0x00100010)) - res = 1; /* write failed, time out error is close enough */ - - *dest = (FPW) 0x00500050; /* clear status register */ - *dest = (FPW) 0x00FF00FF; /* make sure in read mode */ - - return (res); -} - -#ifdef CONFIG_SYS_FLASH_PROTECTION -/*----------------------------------------------------------------------- - */ -int -flash_real_protect(flash_info_t * info, long sector, int prot) -{ - int rcode = 0; /* assume success */ - FPWV *addr; /* address of sector */ - FPW value; - - addr = (FPWV *) (info->start[sector]); - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F800C3B: - case FLASH_28F800C3T: - case FLASH_28F160C3B: - case FLASH_28F160C3T: - case FLASH_28F320C3B: - case FLASH_28F320C3T: - case FLASH_28F640C3B: - case FLASH_28F640C3T: - flash_reset(info); /* make sure in read mode */ - *addr = (FPW) 0x00600060L; /* lock command setup */ - if (prot) - *addr = (FPW) 0x00010001L; /* lock sector */ - else - *addr = (FPW) 0x00D000D0L; /* unlock sector */ - flash_reset(info); /* reset to read mode */ - - /* now see if it really is locked/unlocked as requested */ - *addr = (FPW) 0x00900090; - /* read sector protection at sector address, (A7 .. A0) = 0x02. - * D0 = 1 for each device if protected. - * If at least one device is protected the sector is marked - * protected, but return failure. Mixed protected and - * unprotected devices within a sector should never happen. - */ - value = addr[2] & (FPW) 0x00010001; - if (value == 0) - info->protect[sector] = 0; - else if (value == (FPW) 0x00010001) - info->protect[sector] = 1; - else { - /* error, mixed protected and unprotected */ - rcode = 1; - info->protect[sector] = 1; - } - if (info->protect[sector] != prot) - rcode = 1; /* failed to protect/unprotect as requested */ - - /* reload all protection bits from hardware for now */ - flash_sync_real_protect(info); - break; - - case FLASH_AM640U: - default: - /* no hardware protect that we support */ - info->protect[sector] = prot; - break; - } - - return rcode; -} -#endif diff --git a/board/mx1fs2/intel.h b/board/mx1fs2/intel.h deleted file mode 100644 index 8db5dd4f64..0000000000 --- a/board/mx1fs2/intel.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Copyright (C) 2002 ETC s.r.o. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the ETC s.r.o. nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Written by Marcel Telka <marcel@telka.sk>, 2002. - * - * Documentation: - * [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A, - * 28F320J3A (x8/x16)", April 2002, Order Number: 290667-011 - * [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18, - * 28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005 - * - * This file is taken from OpenWinCE project hosted by SourceForge.net - * - */ - -#ifndef FLASH_INTEL_H -#define FLASH_INTEL_H - -#include <common.h> - -/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */ - -#define CFI_INTEL_CMD_READ_ARRAY 0xFF /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_READ_IDENTIFIER 0x90 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_READ_QUERY 0x98 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_READ_STATUS_REGISTER 0x70 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_CLEAR_STATUS_REGISTER 0x50 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_PROGRAM1 0x40 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_PROGRAM2 0x10 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_WRITE_TO_BUFFER 0xE8 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_CONFIRM 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_BLOCK_ERASE 0x20 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_SUSPEND 0xB0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_RESUME 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_LOCK_SETUP 0x60 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_LOCK_BLOCK 0x01 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_UNLOCK_BLOCK 0xD0 /* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_LOCK_DOWN_BLOCK 0x2F /* 28FxxxK3, 28FxxxK18 */ - -/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */ - -#define CFI_INTEL_SR_READY 1 << 7 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_ERASE_SUSPEND 1 << 6 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_ERASE_ERROR 1 << 5 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_PROGRAM_ERROR 1 << 4 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_VPEN_ERROR 1 << 3 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_PROGRAM_SUSPEND 1 << 2 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_BLOCK_LOCKED 1 << 1 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_BEFP 1 << 0 /* 28FxxxK3, 28FxxxK18 */ - -/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */ - -#define CFI_CHIP_INTEL_28F320J3A 0x0016 -#define CFI_CHIPN_INTEL_28F320J3A "28F320J3A" -#define CFI_CHIP_INTEL_28F640J3A 0x0017 -#define CFI_CHIPN_INTEL_28F640J3A "28F640J3A" -#define CFI_CHIP_INTEL_28F128J3A 0x0018 -#define CFI_CHIPN_INTEL_28F128J3A "28F128J3A" - -/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */ - -#define CFI_CHIP_INTEL_28F640K3 0x8801 -#define CFI_CHIPN_INTEL_28F640K3 "28F640K3" -#define CFI_CHIP_INTEL_28F128K3 0x8802 -#define CFI_CHIPN_INTEL_28F128K3 "28F128K3" -#define CFI_CHIP_INTEL_28F256K3 0x8803 -#define CFI_CHIPN_INTEL_28F256K3 "28F256K3" -#define CFI_CHIP_INTEL_28F640K18 0x8805 -#define CFI_CHIPN_INTEL_28F640K18 "28F640K18" -#define CFI_CHIP_INTEL_28F128K18 0x8806 -#define CFI_CHIPN_INTEL_28F128K18 "28F128K18" -#define CFI_CHIP_INTEL_28F256K18 0x8807 -#define CFI_CHIPN_INTEL_28F256K18 "28F256K18" - -#endif /* FLASH_INTEL_H */ diff --git a/board/mx1fs2/lowlevel_init.S b/board/mx1fs2/lowlevel_init.S deleted file mode 100644 index 56a4819b08..0000000000 --- a/board/mx1fs2/lowlevel_init.S +++ /dev/null @@ -1,188 +0,0 @@ -/* - * Copyright (C) 2004 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA - * 02111-1307, USA. - * - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/imx-regs.h> - -.globl lowlevel_init -lowlevel_init: - - mov r10, lr - -/* Change PERCLK1DIV to 14 ie 14+1 */ - ldr r0, =PCDR - ldr r1, =CONFIG_SYS_PCDR_VAL - str r1, [r0] - -/* set MCU PLL Control Register 0 */ - - ldr r0, =MPCTL0 - ldr r1, =CONFIG_SYS_MPCTL0_VAL - str r1, [r0] - -/* set MCU PLL Control Register 1 */ - - ldr r0, =MPCTL1 - ldr r1, =CONFIG_SYS_MPCTL1_VAL - str r1, [r0] - -/* set mpll restart bit */ - ldr r0, =CSCR - ldr r1, [r0] - orr r1,r1,#(1<<21) - str r1, [r0] - - mov r2,#0x10 -1: - mov r3,#0x2000 -2: - subs r3,r3,#1 - bne 2b - - subs r2,r2,#1 - bne 1b - -/* set System PLL Control Register 0 */ - - ldr r0, =SPCTL0 - ldr r1, =CONFIG_SYS_SPCTL0_VAL - str r1, [r0] - -/* set System PLL Control Register 1 */ - - ldr r0, =SPCTL1 - ldr r1, =CONFIG_SYS_SPCTL1_VAL - str r1, [r0] - -/* set spll restart bit */ - ldr r0, =CSCR - ldr r1, [r0] - orr r1,r1,#(1<<22) - str r1, [r0] - - mov r2,#0x10 -1: - mov r3,#0x2000 -2: - subs r3,r3,#1 - bne 2b - - subs r2,r2,#1 - bne 1b - - ldr r0, =CSCR - ldr r1, =CONFIG_SYS_CSCR_VAL - str r1, [r0] - - ldr r0, =GPCR - ldr r1, =CONFIG_SYS_GPCR_VAL - str r1, [r0] - -/* - * I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon - * this..... - * - * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15 - * register 1, this stops it using the output of the PLL and thus runs at the - * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never - * use the value set in the CM_OSC registers...regardless of what you set it - * too! Thus, although i thought i was running at 140MHz, i'm actually running - * at 40!.. - * - * Slapping this into my bootloader does the trick... - * - * MRC p15,0,r0,c1,c0,0 ; read core configuration register - * ORR r0,r0,#0xC0000000 ; set asynchronous clocks and not fastbus mode - * MCR p15,0,r0,c1,c0,0 ; write modified value to core configuration - * register - * - */ - MRC p15,0,r0,c1,c0,0 -/* ORR r0,r0,#0xC0000000 async mode */ -/* ORR r0,r0,#0x40000000 sync mode */ - ORR r0,r0,#0xC0000000 - MCR p15,0,r0,c1,c0,0 - - ldr r0, =GIUS(0) - ldr r1, =CONFIG_SYS_GIUS_A_VAL - str r1, [r0] - - ldr r0, =FMCR - ldr r1, =CONFIG_SYS_FMCR_VAL - str r1, [r0] - - ldr r0, =CS0U - ldr r1, =CONFIG_SYS_CS0U_VAL - str r1, [r0] - - ldr r0, =CS0L - ldr r1, =CONFIG_SYS_CS0L_VAL - str r1, [r0] - - ldr r0, =CS1U - ldr r1, =CONFIG_SYS_CS1U_VAL - str r1, [r0] - - ldr r0, =CS1L - ldr r1, =CONFIG_SYS_CS1L_VAL - str r1, [r0] - - ldr r0, =CS4U - ldr r1, =CONFIG_SYS_CS4U_VAL - str r1, [r0] - - ldr r0, =CS4L - ldr r1, =CONFIG_SYS_CS4L_VAL - str r1, [r0] - - ldr r0, =CS5U - ldr r1, =CONFIG_SYS_CS5U_VAL - str r1, [r0] - - ldr r0, =CS5L - ldr r1, =CONFIG_SYS_CS5L_VAL - str r1, [r0] - -/* SDRAM Setup */ - - ldr r1,=0x00221000 /* adr of SDCTRL0 */ - ldr r0,=0x92120200 - str r0,[r1,#0] /* put in precharge command mode */ - ldr r2,=0x08200000 /* adr for precharge cmd */ - ldr r0,[r2,#0] /* precharge */ - ldr r0,=0xA2120200 - ldr r2,=0x08000000 /* start of SDRAM */ - str r0,[r1,#0] /* put in auto-refresh mode */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,[r2,#0] /* auto-refresh */ - ldr r0,=0xB2120200 - ldr r2,=0x08111800 - str r0,[r1,#0] /* setup for mode register of SDRAM */ - ldr r0,[r2,#0] /* program mode register */ - ldr r0,=0x82124267 - str r0,[r1,#0] /* back to normal operation */ - - mov pc,r10 diff --git a/board/mx1fs2/mx1fs2.c b/board/mx1fs2/mx1fs2.c deleted file mode 100644 index 90a33c2499..0000000000 --- a/board/mx1fs2/mx1fs2.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Copyright (C) 2004 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include <common.h> -#include <asm/arch/imx-regs.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) - -extern void imx_gpio_mode(int gpio_mode); - -static void logo_init(void) -{ - imx_gpio_mode(PD15_PF_LD0); - imx_gpio_mode(PD16_PF_LD1); - imx_gpio_mode(PD17_PF_LD2); - imx_gpio_mode(PD18_PF_LD3); - imx_gpio_mode(PD19_PF_LD4); - imx_gpio_mode(PD20_PF_LD5); - imx_gpio_mode(PD21_PF_LD6); - imx_gpio_mode(PD22_PF_LD7); - imx_gpio_mode(PD23_PF_LD8); - imx_gpio_mode(PD24_PF_LD9); - imx_gpio_mode(PD25_PF_LD10); - imx_gpio_mode(PD26_PF_LD11); - imx_gpio_mode(PD27_PF_LD12); - imx_gpio_mode(PD28_PF_LD13); - imx_gpio_mode(PD29_PF_LD14); - imx_gpio_mode(PD30_PF_LD15); - imx_gpio_mode(PD14_PF_FLM_VSYNC); - imx_gpio_mode(PD13_PF_LP_HSYNC); - imx_gpio_mode(PD6_PF_LSCLK); - imx_gpio_mode(GPIO_PORTD | GPIO_OUT | GPIO_DR); - imx_gpio_mode(PD11_PF_CONTRAST); - imx_gpio_mode(PD10_PF_SPL_SPR); - - LCDC_RMCR = 0x00000000; - LCDC_PCR = PCR_COLOR | PCR_PBSIZ_8 | PCR_BPIX_16 | PCR_PCD(5); - LCDC_HCR = HCR_H_WIDTH(2); - LCDC_VCR = VCR_V_WIDTH(2); - - LCDC_PWMR = 0x00000380; /* contrast to 0x80 middle (is best !!!) */ - LCDC_SSA = 0x10040000; /* image in flash */ - - LCDC_SIZE = SIZE_XMAX(320) | SIZE_YMAX(240); /* screen size */ - - LCDC_VPW = 0x000000A0; /* Virtual Page Width Register */ - LCDC_POS = 0x00000000; /* panning offset 0 (0 pixel offset) */ - - /* disable Cursor */ - LCDC_CPOS = 0x00000000; - - /* fixed burst length */ - LCDC_DMACR = DMACR_BURST | DMACR_HM(8) | DMACR_TM(2); - - /* enable LCD */ - DR(3) |= 0x00001000; - LCDC_RMCR = RMCR_LCDC_EN; - -} - -int -board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_MX1FS2; - gd->bd->bi_boot_params = 0x08000100; -serial_init(); - logo_init(); - return 0; -} - -int -dram_init(void) -{ -#if ( CONFIG_NR_DRAM_BANKS > 0 ) - gd->bd->bi_dram[0].start = MX1FS2_SDRAM_1; - gd->bd->bi_dram[0].size = MX1FS2_SDRAM_1_SIZE; -#endif - return 0; -} - -/** - * show_boot_progress: - indicate state of the boot process - * - * @param status: Status number - see README for details. - * - */ - -void -show_boot_progress(int status) -{ - /* We use this as a hook to disable serial ports just before booting - * This way we suppress the "uncompressing linux..." message - */ -#ifdef CONFIG_SILENT_CONSOLE - if( status == 8) { - if( getenv("silent") != NULL ) { - *(volatile unsigned long *)0x206080 &= ~1; - *(volatile unsigned long *)0x207080 &= ~1; - } - } -#endif - return; -} diff --git a/board/netstar/Makefile b/board/netstar/Makefile deleted file mode 100644 index 7230a2f88a..0000000000 --- a/board/netstar/Makefile +++ /dev/null @@ -1,95 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2005 -# Ladislav Michl, 2N Telekomunikace, michl@2n.cz -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := netstar.o -SOBJS := setup.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -LOAD_ADDR = 0x10400000 - -######################################################################### - -all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin \ - $(obj)crcek.srec $(obj)crcek.bin $(obj)crcit - -$(LIB): $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $^) - -$(obj)eeprom_start.o: - echo "b eeprom" | $(CC) $(AFLAGS) -c -x assembler -o $@ - - -$(obj)eeprom: $(obj)eeprom_start.o $(obj)eeprom.o - $(LD) -Ttext $(LOAD_ADDR) -e eeprom -o $@ $^ \ - -L$(obj)../../examples/standalone -lstubs \ - $(PLATFORM_LIBS) - -$(obj)eeprom.srec: $(obj)eeprom - $(OBJCOPY) -S -O srec $(<:.o=) $@ - -$(obj)eeprom.bin: $(obj)eeprom - $(OBJCOPY) -S -O binary $< $@ - -$(obj)crcek.srec: $(obj)crcek.o - $(LD) -g -Ttext 0x00000000 -e crcek -o $(<:.o=) $^ - $(OBJCOPY) -S -O srec $(<:.o=) $@ - -$(obj)crcek.bin: $(obj)crcek.srec - $(OBJCOPY) -I srec -O binary $< $@ - -$(obj)crcit: $(obj)crcit.o $(obj)crc32.o - $(HOSTCC) $(HOSTCFLAGS) -o $@ $^ - -$(obj)crcit.o: crcit.c - $(HOSTCC) $(HOSTCFLAGS) -o $@ -c $< - -$(obj)crc32.o: $(SRCTREE)/lib/crc32.c - $(HOSTCC) $(HOSTCFLAGS) -DUSE_HOSTCC -I$(TOPDIR)/include \ - -o $@ -c $< - -clean: - rm -f $(SOBJS) $(OBJS) \ - $(obj)eeprom_start.o $(obj)eeprom.o \ - $(obj)eeprom $(obj)eeprom.srec $(obj)eeprom.bin \ - $(obj)crcek.o $(obj)crcek $(obj)crcek.srec $(obj)crcek.bin - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/netstar/config.mk b/board/netstar/config.mk deleted file mode 100644 index 9e1446e4b6..0000000000 --- a/board/netstar/config.mk +++ /dev/null @@ -1,11 +0,0 @@ -# -# Linux-Kernel is expected to be at 1000'8000, -# entry 1000'8000 (mem base + reserved) -# -# We load ourself to internal RAM at 2001'2000 -# Check map file when changing CONFIG_SYS_TEXT_BASE. -# Everything has fit into 192kB internal SRAM! -# - -# XXX CONFIG_SYS_TEXT_BASE = 0x20012000 -CONFIG_SYS_TEXT_BASE = 0x13FC0000 diff --git a/board/netstar/crcek.S b/board/netstar/crcek.S deleted file mode 100644 index af35662187..0000000000 --- a/board/netstar/crcek.S +++ /dev/null @@ -1,241 +0,0 @@ -/** - * (C) Copyright 2005 - * 2N Telekomunikace, Ladislav Michl <michl@2n.cz> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2. - * - * Image layout looks like following: - * u32 - size - * u32 - version - * ... - data - * u32 - crc32 - */ - -#include <config.h> -#include "crcek.h" - -/** - * do_crc32 - calculate CRC32 of given buffer - * r0 - crc - * r1 - pointer to buffer - * r2 - buffer len - */ - .macro do_crc32 - ldr r5, FFFFFFFF - eor r0, r0, r5 - adr r3, CRC32_TABLE -1: - ldrb r4, [r1], #1 - eor r4, r4, r0 - and r4, r4, #0xff - ldr r4, [r3, r4, lsl#2] - eor r0, r4, r0, lsr#8 - subs r2, r2, #0x1 - bne 1b - eor r0, r0, r5 - .endm - - .macro crcuj, offset, size - mov r0, #0 - ldr r1, \offset - ldr r2, [r1], #4 - cmp r2, r0 @ no data, no problem - beq 2f - tst r2, #3 @ unaligned size - bne 2f - ldr r3, \size - cmp r2, r3 @ bogus size - bhi 2f - do_crc32 - ldr r1, [r1] -2: - cmp r0, r1 - .endm - - .macro wait, reg - mov \reg, #0x100000 -3: - subs \reg, \reg, #0x1 - bne 3b - .endm - -.text -.globl crcek -crcek: - /* Enable I-cache */ - mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register - mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register - mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register - orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000 - mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register - mov r1, #0x00 - mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache - nop - nop - nop - nop - - /* Setup clocking mode */ - ldr r0, MPU_CLKM_BASE @ base of CLOCK unit - ldrh r1, [r0, #0x18] @ ARM_SYST - get reset status - bic r1, r1, #(7 << 11) @ clear clock select - orr r1, r1, #(2 << 11) @ set synchronous scalable - mov r2, #0 -loop: - cmp r2, #1 @ this loop will wait for at least 100 cycles - streqh r1, [r0, #0x18] @ before issuing next request from MPU - add r2, r2, #1 @ on the 1st run code is loaded into I-cache - cmp r2, #16 @ and second run will set clocking mode - bne loop - nop - - /* Setup clock dividers */ - ldr r1, CKCTL_VAL - orr r1, r1, #0x2000 @ enable DSP clock - strh r1, [r0] @ setup clock divisors - - /* Setup DPLL to generate requested freq */ - ldr r0, DPLL1_BASE @ base of DPLL1 register - mov r1, #0x0010 @ set PLL_ENABLE - orr r1, r1, #0x2000 @ set IOB to new locking - orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF - orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF - strh r1, [r0] @ write - -locking: - ldrh r1, [r0] @ get DPLL value - tst r1, #0x01 - beq locking @ while LOCK not set - - /* Enable clock */ - ldr r0, MPU_CLKM_BASE @ base of CLOCK unit - mov r1, #(1 << 10) @ disable idle mode do not check - @ nWAKEUP pin, other remain active - strh r1, [r0, #0x04] - ldr r1, EN_CLK_VAL - strh r1, [r0, #0x08] - mov r1, #0x003f @ FLASH.RP not enabled in idle and - strh r1, [r0, #0x0c] @ max delayed ( 32 x CLKIN ) - - - mov r6, #0 - crcuj _LOADER1_OFFSET, _LOADER_SIZE - bne crc1_bad - orr r6, r6, #1 -crc1_bad: - crcuj _LOADER2_OFFSET, _LOADER_SIZE - bne crc2_bad - orr r6, r6, #2 -crc2_bad: - ldr r3, _LOADER1_OFFSET - ldr r4, _LOADER2_OFFSET - teq r6, #3 - bne one_is_bad @ one of them (or both) has bad crc - ldr r1, [r3, #4] - ldr r2, [r4, #4] - cmp r1, r2 @ boot 2nd loader if versions differ - beq boot_1st - b boot_2nd -one_is_bad: - tst r6, #1 - bne boot_1st - tst r6, #2 - bne boot_2nd -@ We are doomed, so let user know. -hell: - ldr r0, GPIO_BASE @ configure GPIO pins - ldr r1, GPIO_DIRECTION - strh r1, [r0, #0x08] -blink_loop: - mov r1, #0x08 - strh r1, [r0, #0x04] - wait r3 - mov r1, #0x10 - strh r1, [r0, #0x04] - wait r3 - b blink_loop -boot_1st: - add pc, r3, #8 -boot_2nd: - add pc, r4, #8 - -_LOADER_SIZE: - .word LOADER_SIZE - 8 @ minus size and crc32 -_LOADER1_OFFSET: - .word LOADER1_OFFSET -_LOADER2_OFFSET: - .word LOADER2_OFFSET - -FFFFFFFF: - .word 0xffffffff -CRC32_TABLE: - .word 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419 - .word 0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4 - .word 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07 - .word 0x90bf1d91, 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de - .word 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, 0x136c9856 - .word 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9 - .word 0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4 - .word 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b - .word 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3 - .word 0x45df5c75, 0xdcd60dcf, 0xabd13d59, 0x26d930ac, 0x51de003a - .word 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599 - .word 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924 - .word 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190 - .word 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f - .word 0x9fbfe4a5, 0xe8b8d433, 0x7807c9a2, 0x0f00f934, 0x9609a88e - .word 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01 - .word 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed - .word 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950 - .word 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3 - .word 0xfbd44c65, 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2 - .word 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a - .word 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5 - .word 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, 0xbe0b1010 - .word 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f - .word 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17 - .word 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6 - .word 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615 - .word 0x73dc1683, 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8 - .word 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, 0xf00f9344 - .word 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb - .word 0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a - .word 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5 - .word 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1 - .word 0xa6bc5767, 0x3fb506dd, 0x48b2364b, 0xd80d2bda, 0xaf0a1b4c - .word 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef - .word 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236 - .word 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe - .word 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31 - .word 0x2cd99e8b, 0x5bdeae1d, 0x9b64c2b0, 0xec63f226, 0x756aa39c - .word 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713 - .word 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b - .word 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242 - .word 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1 - .word 0x18b74777, 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c - .word 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, 0xa00ae278 - .word 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7 - .word 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, 0x40df0b66 - .word 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9 - .word 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605 - .word 0xcdd70693, 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8 - .word 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b - .word 0x2d02ef8d - -GPIO_BASE: - .word 0xfffce000 -MPU_CLKM_BASE: - .word 0xfffece00 -DPLL1_BASE: - .word 0xfffecf00 - -CKCTL_VAL: - .word OMAP5910_ARM_CKCTL -EN_CLK_VAL: - .word OMAP5910_ARM_EN_CLK -GPIO_DIRECTION: - .word 0x0000ffe7 - -.end diff --git a/board/netstar/crcek.h b/board/netstar/crcek.h deleted file mode 100644 index 30c08602f5..0000000000 --- a/board/netstar/crcek.h +++ /dev/null @@ -1,3 +0,0 @@ -#define LOADER_SIZE (448 * 1024) -#define LOADER1_OFFSET (128 * 1024) -#define LOADER2_OFFSET (LOADER1_OFFSET + LOADER_SIZE) diff --git a/board/netstar/crcit.c b/board/netstar/crcit.c deleted file mode 100644 index a16264914c..0000000000 --- a/board/netstar/crcit.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * (C) Copyright 2005 - * 2N Telekomunikace, Ladislav Michl <michl@2n.cz> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <stdio.h> -#include <stdlib.h> -#include <stdint.h> -#include <fcntl.h> -#include <string.h> -#include <unistd.h> -#include <sys/types.h> -#include <sys/stat.h> -#include "crcek.h" - -extern uint32_t crc32(uint32_t, const unsigned char *, uint); - -static uint32_t data[LOADER_SIZE/4 + 3]; - -static int do_crc(char *path, unsigned version) -{ - uint32_t *p; - ssize_t size; - int fd; - - fd = open(path, O_RDONLY); - if (fd == -1) { - perror("Error opening file"); - return EXIT_FAILURE; - } - p = data + 2; - size = read(fd, p, LOADER_SIZE + 4); - if (size == -1) { - perror("Error reading file"); - return EXIT_FAILURE; - } - if (size > LOADER_SIZE) { - fprintf(stderr, "File too large\n"); - return EXIT_FAILURE; - } - size = (size + 3) & ~3; /* round up to 4 bytes */ - size += 4; /* add size of version field */ - data[0] = size; - data[1] = version; - data[size/4 + 1] = crc32(0, (unsigned char *)(data + 1), size); - close(fd); - - if (write(STDOUT_FILENO, data, size + 4 /*size*/ + 4 /*crc*/) == -1) { - perror("Error writing file"); - return EXIT_FAILURE; - } - - return EXIT_SUCCESS; -} - -int main(int argc, char * const *argv) -{ - if (argc == 2) { - return do_crc(argv[1], 0); - } else if ((argc == 4) && (strcmp(argv[1], "-v") == 0)) { - char *endptr, *nptr = argv[2]; - unsigned ver = strtoul(nptr, &endptr, 0); - if (*nptr != '\0' && *endptr == '\0') - return do_crc(argv[3], ver); - } - fprintf(stderr, "Usage: crcit [-v version] <image>\n"); - - return EXIT_FAILURE; -} diff --git a/board/netstar/eeprom.c b/board/netstar/eeprom.c deleted file mode 100644 index aa375a4b1a..0000000000 --- a/board/netstar/eeprom.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * (C) Copyright 2005 - * Ladislav Michl, 2N Telekomunikace, michl@2n.cz - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Some code shamelessly stolen back from Robin Getz. - */ - -#include <common.h> -#include <exports.h> -#include <timestamp.h> -#include <net.h> -#include "../drivers/net/smc91111.h" - -static struct eth_device dev = { - .iobase = CONFIG_SMC91111_BASE -}; - -static u16 read_eeprom_reg(u16 reg) -{ - int timeout; - - SMC_SELECT_BANK(&dev, 2); - SMC_outw(&dev, reg, PTR_REG); - - SMC_SELECT_BANK(&dev, 1); - SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT | - CTL_RELOAD, CTL_REG); - - timeout = 100; - - while ((SMC_inw(&dev, CTL_REG) & CTL_RELOAD) && --timeout) - udelay(100); - if (timeout == 0) { - printf("Timeout reading register %02x\n", reg); - return 0; - } - - return SMC_inw(&dev, GP_REG); -} - -static int write_eeprom_reg(u16 value, u16 reg) -{ - int timeout; - - SMC_SELECT_BANK(&dev, 2); - SMC_outw(&dev, reg, PTR_REG); - - SMC_SELECT_BANK(&dev, 1); - - SMC_outw(&dev, value, GP_REG); - SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT | - CTL_STORE, CTL_REG); - - timeout = 100; - - while ((SMC_inw(&dev, CTL_REG) & CTL_STORE) && --timeout) - udelay(100); - if (timeout == 0) { - printf("Timeout writing register %02x\n", reg); - return 0; - } - - return 1; -} - -static int write_data(u16 *buf, int len) -{ - u16 reg = 0x23; - - while (len--) - write_eeprom_reg(*buf++, reg++); - - return 0; -} - -static int verify_macaddr(char *s) -{ - u16 reg; - int i, err = 0; - - puts("HWaddr: "); - for (i = 0; i < 3; i++) { - reg = read_eeprom_reg(0x20 + i); - printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n'); - if (s) - err |= reg != ((u16 *)s)[i]; - } - - return err ? 0 : 1; -} - -static int set_mac(char *s) -{ - int i; - char *e, eaddr[6]; - - /* turn string into mac value */ - for (i = 0; i < 6; i++) { - eaddr[i] = simple_strtoul(s, &e, 16); - s = (*e) ? e+1 : e; - } - - for (i = 0; i < 3; i++) - write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i); - - return 0; -} - -static int parse_element(char *s, unsigned char *buf, int len) -{ - int cnt; - char *p, num[3]; - unsigned char id; - - id = simple_strtoul(s, &p, 16); - if (*p++ != ':') - return -1; - cnt = 2; - num[2] = 0; - for (; *p; p += 2) { - if (p[1] == 0) - return -2; - if (cnt + 3 > len) - return -3; - num[0] = p[0]; - num[1] = p[1]; - buf[cnt++] = simple_strtoul(num, NULL, 16); - } - buf[0] = id; - buf[1] = cnt - 2; - - return cnt; -} - -int eeprom(int argc, char * const argv[]) -{ - int i, len, ret; - unsigned char buf[58], *p; - - app_startup(argv); - i = get_version(); - if (i != XF_VERSION) { - printf("Using ABI version %d, but U-Boot provides %d\n", - XF_VERSION, i); - return 1; - } - - if ((SMC_inw(&dev, BANK_SELECT) & 0xFF00) != 0x3300) { - puts("SMSC91111 not found\n"); - return 2; - } - - /* Called without parameters - print MAC address */ - if (argc < 2) { - verify_macaddr(NULL); - return 0; - } - - /* Print help message */ - if (argv[1][1] == 'h') { - puts("NetStar EEPROM writer\n" - "Built: " U_BOOT_DATE " at " U_BOOT_TIME "\n" - "Usage:\n\t<mac_address> [<element_1>] [<...>]\n"); - return 0; - } - - /* Try to parse information elements */ - len = sizeof(buf); - p = buf; - for (i = 2; i < argc; i++) { - ret = parse_element(argv[i], p, len); - switch (ret) { - case -1: - printf("Element %d: malformed\n", i - 1); - return 3; - case -2: - printf("Element %d: odd character count\n", i - 1); - return 3; - case -3: - puts("Out of EEPROM memory\n"); - return 3; - default: - p += ret; - len -= ret; - } - } - - /* First argument (MAC) is mandatory */ - set_mac(argv[1]); - if (verify_macaddr(argv[1])) { - puts("*** HWaddr does not match! ***\n"); - return 4; - } - - while (len--) - *p++ = 0; - - write_data((u16 *)buf, sizeof(buf) >> 1); - - return 0; -} diff --git a/board/netstar/netstar.c b/board/netstar/netstar.c deleted file mode 100644 index df1704be35..0000000000 --- a/board/netstar/netstar.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#include <i2c.h> -#include <flash.h> -#include <nand.h> - -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - /* arch number of NetStar board */ - gd->bd->bi_arch_number = MACH_TYPE_NETSTAR; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x10000100; - - return 0; -} - -int dram_init(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - /* Take the Ethernet controller out of reset and wait - * for the EEPROM load to complete. */ - *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80; - udelay(10); /* doesn't work before timer_init call */ - *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80; - udelay(500); - - return 0; -} - -int misc_init_r(void) -{ -#if defined(CONFIG_RTC_DS1307) - /* enable trickle charge */ - i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, 0x10, 0xaa); -#endif - return 0; -} - -int board_late_init(void) -{ - return 0; -} - -#if defined(CONFIG_CMD_FLASH) -ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t * info) -{ - if (banknum == 0) { /* AM29LV800 boot flash */ - info->portwidth = FLASH_CFI_16BIT; - info->chipwidth = FLASH_CFI_BY16; - info->interface = FLASH_CFI_X16; - return 1; - } - - return 0; -} -#endif - -#if defined(CONFIG_CMD_NAND) -/* - * hardware specific access to control-lines - * - * NAND_NCE: bit 0 - don't care - * NAND_CLE: bit 1 -> bit 1 (0x0002) - * NAND_ALE: bit 2 -> bit 2 (0x0004) - */ -static void netstar_nand_hwcontrol(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - struct nand_chip *chip = mtd->priv; - unsigned long mask; - - if (cmd == NAND_CMD_NONE) - return; - - mask = (ctrl & NAND_CLE) ? 0x02 : 0; - if (ctrl & NAND_ALE) - mask |= 0x04; - writeb(cmd, (unsigned long)chip->IO_ADDR_W | mask); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->options = NAND_SAMSUNG_LP_OPTIONS; - nand->ecc.mode = NAND_ECC_SOFT; - nand->cmd_ctrl = netstar_nand_hwcontrol; - nand->chip_delay = 400; - return 0; -} -#endif - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/board/netstar/setup.S b/board/netstar/setup.S deleted file mode 100644 index 72e18112f6..0000000000 --- a/board/netstar/setup.S +++ /dev/null @@ -1,284 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2004 Ales Jindra <jindra@2n.cz> - * (C) Copyright 2005 Ladislav Michl <michl@2n.cz> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* SDRAM load addr from config.mk */ - -OMAP5910_LPG1_BASE: .word 0xfffbd000 -OMAP5910_TIPB_SWITCHES_BASE: .word 0xfffbc800 -OMAP5910_MPU_TC_BASE: .word 0xfffecc00 -OMAP5910_MPU_CLKM_BASE: .word 0xfffece00 -OMAP5910_ULPD_PWR_MNG_BASE: .word 0xfffe0800 -OMAP5910_DPLL1_BASE: .word 0xfffecf00 -OMAP5910_GPIO_BASE: .word 0xfffce000 -OMAP5910_MPU_WD_TIMER_BASE: .word 0xfffec800 -OMAP5910_MPUI_BASE: .word 0xfffec900 - -_OMAP5910_ARM_CKCTL: .word OMAP5910_ARM_CKCTL -_OMAP5910_ARM_EN_CLK: .word OMAP5910_ARM_EN_CLK - -OMAP5910_MPUI_CTRL: .word 0x0000ff1b - -VAL_EMIFS_CS0_CONFIG: .word 0x00009090 -VAL_EMIFS_CS1_CONFIG: .word 0x00003031 -VAL_EMIFS_CS2_CONFIG: .word 0x0000a0a1 -VAL_EMIFS_CS3_CONFIG: .word 0x0000c0c0 -VAL_EMIFS_DYN_WAIT: .word 0x00000000 -/* autorefresh counter 0x246 ((64000000/13.4)-400)/8192) */ - /* SLRF SD_RET ARE SDRAM_TYPE ARCV SDRAM_FREQUENCY PWD CLK */ - -#if (PHYS_SDRAM_1_SIZE == SZ_32M) -VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xf << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27)) -#else -VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27)) -#endif - -VAL_EMIFF_SDRAM_CONFIG2: .word 0x00000003 -VAL_EMIFF_MRS: .word 0x00000037 - -/* - * GPIO04 - Green LED (Red LED is connected to LED Pulse Generator) - * GPIO07 - LAN91C111 reset - */ -GPIO_DIRECTION: - .word 0x0000ff6f -/* - * Disable everything (green LED is connected via invertor) - */ -GPIO_OUTPUT: - .word 0x00000010 - -MUX_CONFIG_BASE: - .word 0xfffe1000 - -MUX_CONFIG_VALUES: - .align 4 - .word 0x00000000 @ FUNC_MUX_CTRL_0 - .word 0x00000000 @ FUNC_MUX_CTRL_1 - .word 0x00000000 @ FUNC_MUX_CTRL_2 - .word 0x00000000 @ FUNC_MUX_CTRL_3 - .word 0x00000000 @ FUNC_MUX_CTRL_4 - .word 0x02080480 @ FUNC_MUX_CTRL_5 - .word 0x0100001c @ FUNC_MUX_CTRL_6 - .word 0x0004800b @ FUNC_MUX_CTRL_7 - .word 0x10001200 @ FUNC_MUX_CTRL_8 - .word 0x01201012 @ FUNC_MUX_CTRL_9 - .word 0x02082248 @ FUNC_MUX_CTRL_A - .word 0x00000248 @ FUNC_MUX_CTRL_B - .word 0x12240000 @ FUNC_MUX_CTRL_C - .word 0x00002000 @ FUNC_MUX_CTRL_D - .word 0x00000000 @ PULL_DWN_CTRL_0 - .word 0x00000800 @ PULL_DWN_CTRL_1 - .word 0x01801000 @ PULL_DWN_CTRL_2 - .word 0x00000000 @ PULL_DWN_CTRL_3 - .word 0x00000000 @ GATE_INH_CTRL_0 - .word 0x00000000 @ VOLTAGE_CTRL_0 - .word 0x00000000 @ TEST_DBG_CTRL_0 - .word 0x00000006 @ MOD_CONF_CTRL_0 - .word 0x0000eaef @ COMP_MODE_CTRL_0 - -MUX_CONFIG_OFFSETS: - .align 1 - .byte 0x00 @ FUNC_MUX_CTRL_0 - .byte 0x04 @ FUNC_MUX_CTRL_1 - .byte 0x08 @ FUNC_MUX_CTRL_2 - .byte 0x10 @ FUNC_MUX_CTRL_3 - .byte 0x14 @ FUNC_MUX_CTRL_4 - .byte 0x18 @ FUNC_MUX_CTRL_5 - .byte 0x1c @ FUNC_MUX_CTRL_6 - .byte 0x20 @ FUNC_MUX_CTRL_7 - .byte 0x24 @ FUNC_MUX_CTRL_8 - .byte 0x28 @ FUNC_MUX_CTRL_9 - .byte 0x2c @ FUNC_MUX_CTRL_A - .byte 0x30 @ FUNC_MUX_CTRL_B - .byte 0x34 @ FUNC_MUX_CTRL_C - .byte 0x38 @ FUNC_MUX_CTRL_D - .byte 0x40 @ PULL_DWN_CTRL_0 - .byte 0x44 @ PULL_DWN_CTRL_1 - .byte 0x48 @ PULL_DWN_CTRL_2 - .byte 0x4c @ PULL_DWN_CTRL_3 - .byte 0x50 @ GATE_INH_CTRL_0 - .byte 0x60 @ VOLTAGE_CTRL_0 - .byte 0x70 @ TEST_DBG_CTRL_0 - .byte 0x80 @ MOD_CONF_CTRL_0 - .byte 0x0c @ COMP_MODE_CTRL_0 - .byte 0xff - -.globl lowlevel_init -lowlevel_init: - /* Improve performance a bit... */ - mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register - mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register - mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register - orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000 - mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register - mov r1, #0x00 - mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache - nop - nop - nop - nop - - /* Setup clocking mode */ - ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit - ldrh r1, [r0, #0x18] @ ARM_SYST - get reset status - bic r1, r1, #(7 << 11) @ clear clock select - orr r1, r1, #(2 << 11) @ set synchronous scalable - mov r2, #0 -loop: - cmp r2, #1 @ this loop will wait for at least 100 cycles - streqh r1, [r0, #0x18] @ before issuing next request from MPU - add r2, r2, #1 @ on the 1st run code is loaded into I-cache - cmp r2, #16 @ and second run will set clocking mode - bne loop - nop - - /* Setup clock dividers */ - ldr r1, _OMAP5910_ARM_CKCTL - orr r1, r1, #0x2000 @ enable DSP clock - strh r1, [r0] @ setup clock divisors - - /* Setup DPLL to generate requested freq */ - ldr r0, OMAP5910_DPLL1_BASE @ base of DPLL1 register - mov r1, #0x0010 @ set PLL_ENABLE - orr r1, r1, #0x2000 @ set IOB to new locking - orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF - orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF - strh r1, [r0] @ write - -locking: - ldrh r1, [r0] @ get DPLL value - tst r1, #0x01 - beq locking @ while LOCK not set - - /* Enable clock */ - ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit - mov r1, #(1 << 10) @ disable idle mode do not check - @ nWAKEUP pin, other remain active - strh r1, [r0, #0x04] - ldr r1, _OMAP5910_ARM_EN_CLK - strh r1, [r0, #0x08] - mov r1, #0x003f @ FLASH.RP not enabled in idle and - strh r1, [r0, #0x0c] @ max delayed ( 32 x CLKIN ) - - /* Configure 5910 pins functions to match our board. */ - ldr r0, MUX_CONFIG_BASE - adr r1, MUX_CONFIG_VALUES - adr r2, MUX_CONFIG_OFFSETS -next_mux_cfg: - ldrb r3, [r2], #1 - ldr r4, [r1], #4 - cmp r3, #0xff - strne r4, [r0, r3] - bne next_mux_cfg - - /* Configure GPIO pins (also disables Green LED) */ - ldr r0, OMAP5910_GPIO_BASE - ldr r1, GPIO_OUTPUT - strh r1, [r0, #0x04] - ldr r1, GPIO_DIRECTION - strh r1, [r0, #0x08] - - /* EnablePeripherals */ - ldr r0, OMAP5910_MPU_CLKM_BASE @ CLOCK unit - mov r1, #0x0001 @ Peripheral enable - strh r1, [r0, #0x14] - - /* Program LED Pulse Generator */ - ldr r0, OMAP5910_LPG1_BASE @ 1st LED Pulse Generator - mov r1, #0x7F @ Set obscure frequency in - strb r1, [r0, #0x00] @ LCR - mov r1, #0x01 @ Enable clock (CLK_EN) in - strb r1, [r0, #0x04] @ PMR - - /* TIPB Lock UART1 */ - ldr r0, OMAP5910_TIPB_SWITCHES_BASE @ prepare base of TIPB switches - mov r1, #1 @ ARM allocated - strh r1, [r0,#0x04] @ clear IRQ line and status bits - strh r1, [r0,#0x00] - ldrh r1, [r0,#0x04] - - /* Disable watchdog */ - ldr r0, OMAP5910_MPU_WD_TIMER_BASE - mov r1, #0xf5 - strh r1, [r0, #0x8] - mov r1, #0xa0 - strh r1, [r0, #0x8] - - /* Enable MCLK */ - ldr r0, OMAP5910_ULPD_PWR_MNG_BASE - mov r1, #0x6 - strh r1, [r0, #0x34] - strh r1, [r0, #0x34] - - /* Setup clock divisors */ - ldr r0, OMAP5910_ULPD_PWR_MNG_BASE @ base of ULDPL DPLL1 register - - mov r1, #0x0010 @ set PLL_ENABLE - orr r1, r1, #0x2000 @ set IOB to new locking - strh r1, [r0] @ write - -ulocking: - ldrh r1, [r0] @ get DPLL value - tst r1, #1 - beq ulocking @ while LOCK not set - - /* EMIF init */ - ldr r0, OMAP5910_MPU_TC_BASE - ldrh r1, [r0, #0x0c] @ EMIFS_CONFIG_REG - bic r1, r1, #0x0c @ pwr down disabled, flash WP - orr r1, r1, #0x01 - str r1, [r0, #0x0c] - - ldr r1, VAL_EMIFS_CS0_CONFIG - str r1, [r0, #0x10] @ EMIFS_CS0_CONFIG - ldr r1, VAL_EMIFS_CS1_CONFIG - str r1, [r0, #0x14] @ EMIFS_CS1_CONFIG - ldr r1, VAL_EMIFS_CS2_CONFIG - str r1, [r0, #0x18] @ EMIFS_CS2_CONFIG - ldr r1, VAL_EMIFS_CS3_CONFIG - str r1, [r0, #0x1c] @ EMIFS_CS3_CONFIG - ldr r1, VAL_EMIFS_DYN_WAIT - str r1, [r0, #0x40] @ EMIFS_CFG_DYN_WAIT - - /* Setup SDRAM */ - ldr r1, VAL_EMIFF_SDRAM_CONFIG - str r1, [r0, #0x20] @ EMIFF_SDRAM_CONFIG - ldr r1, VAL_EMIFF_SDRAM_CONFIG2 - str r1, [r0, #0x3c] @ EMIFF_SDRAM_CONFIG2 - ldr r1, VAL_EMIFF_MRS - str r1, [r0, #0x24] @ EMIFF_MRS - /* SDRAM needs 100us to stabilize */ - mov r0, #0x4000 -sdelay: - subs r0, r0, #0x1 - bne sdelay - - /* back to arch calling code */ - mov pc, lr -.end diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 8ab94404d1..160dac8e1c 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -28,6 +28,7 @@ #include <asm/arch/sys_proto.h> #include <asm/arch/clk_rst.h> +#include <asm/arch/clock.h> #include <asm/arch/pinmux.h> #include <asm/arch/uart.h> #include "board.h" @@ -76,33 +77,28 @@ int timer_init(void) static void clock_init_uart(void) { struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + struct clk_pll *pll = &clkrst->crc_pll[CLOCK_PLL_ID_PERIPH]; u32 reg; - reg = readl(&clkrst->crc_pllp_base); - if (!(reg & PLL_BASE_OVRRIDE)) { + reg = readl(&pll->pll_base); + if (!(reg & PLL_BASE_OVRRIDE_MASK)) { /* Override pllp setup for 216MHz operation. */ - reg = (PLL_BYPASS | PLL_BASE_OVRRIDE | PLL_DIVP); - reg |= (((NVRM_PLLP_FIXED_FREQ_KHZ/500) << 8) | PLL_DIVM); - writel(reg, &clkrst->crc_pllp_base); + reg = PLL_BYPASS_MASK | PLL_BASE_OVRRIDE_MASK | + (1 << PLL_DIVP_SHIFT) | (0xc << PLL_DIVM_SHIFT); + reg |= (NVRM_PLLP_FIXED_FREQ_KHZ / 500) << PLL_DIVN_SHIFT; + writel(reg, &pll->pll_base); - reg |= PLL_ENABLE; - writel(reg, &clkrst->crc_pllp_base); + reg |= PLL_ENABLE_MASK; + writel(reg, &pll->pll_base); - reg &= ~PLL_BYPASS; - writel(reg, &clkrst->crc_pllp_base); + reg &= ~PLL_BYPASS_MASK; + writel(reg, &pll->pll_base); } - /* Now do the UART reset/clock enable */ #if defined(CONFIG_TEGRA2_ENABLE_UARTA) - /* Assert Reset to UART */ - reg = readl(&clkrst->crc_rst_dev_l); - reg |= SWR_UARTA_RST; /* SWR_UARTA_RST = 1 */ - writel(reg, &clkrst->crc_rst_dev_l); - - /* Enable clk to UART */ - reg = readl(&clkrst->crc_clk_out_enb_l); - reg |= CLK_ENB_UARTA; /* CLK_ENB_UARTA = 1 */ - writel(reg, &clkrst->crc_clk_out_enb_l); + /* Assert UART reset and enable clock */ + reset_set_enable(PERIPH_ID_UART1, 1); + clock_enable(PERIPH_ID_UART1); /* Enable pllp_out0 to UART */ reg = readl(&clkrst->crc_clk_src_uarta); @@ -113,20 +109,12 @@ static void clock_init_uart(void) udelay(2); /* De-assert reset to UART */ - reg = readl(&clkrst->crc_rst_dev_l); - reg &= ~SWR_UARTA_RST; /* SWR_UARTA_RST = 0 */ - writel(reg, &clkrst->crc_rst_dev_l); + reset_set_enable(PERIPH_ID_UART1, 0); #endif /* CONFIG_TEGRA2_ENABLE_UARTA */ #if defined(CONFIG_TEGRA2_ENABLE_UARTD) - /* Assert Reset to UART */ - reg = readl(&clkrst->crc_rst_dev_u); - reg |= SWR_UARTD_RST; /* SWR_UARTD_RST = 1 */ - writel(reg, &clkrst->crc_rst_dev_u); - - /* Enable clk to UART */ - reg = readl(&clkrst->crc_clk_out_enb_u); - reg |= CLK_ENB_UARTD; /* CLK_ENB_UARTD = 1 */ - writel(reg, &clkrst->crc_clk_out_enb_u); + /* Assert UART reset and enable clock */ + reset_set_enable(PERIPH_ID_UART4, 1); + clock_enable(PERIPH_ID_UART4); /* Enable pllp_out0 to UART */ reg = readl(&clkrst->crc_clk_src_uartd); @@ -137,9 +125,7 @@ static void clock_init_uart(void) udelay(2); /* De-assert reset to UART */ - reg = readl(&clkrst->crc_rst_dev_u); - reg &= ~SWR_UARTD_RST; /* SWR_UARTD_RST = 0 */ - writel(reg, &clkrst->crc_rst_dev_u); + reset_set_enable(PERIPH_ID_UART4, 0); #endif /* CONFIG_TEGRA2_ENABLE_UARTD */ } @@ -157,19 +143,15 @@ static void pin_mux_uart(void) reg &= 0xFFF0FFFF; /* IRRX_/IRTX_SEL [19:16] = 00 UARTA */ writel(reg, &pmt->pmt_ctl_c); - reg = readl(&pmt->pmt_tri_a); - reg &= ~Z_IRRX; /* Z_IRRX = normal (0) */ - reg &= ~Z_IRTX; /* Z_IRTX = normal (0) */ - writel(reg, &pmt->pmt_tri_a); + pinmux_tristate_disable(PIN_IRRX); + pinmux_tristate_disable(PIN_IRTX); #endif /* CONFIG_TEGRA2_ENABLE_UARTA */ #if defined(CONFIG_TEGRA2_ENABLE_UARTD) reg = readl(&pmt->pmt_ctl_b); reg &= 0xFFFFFFF3; /* GMC_SEL [3:2] = 00, UARTD */ writel(reg, &pmt->pmt_ctl_b); - reg = readl(&pmt->pmt_tri_a); - reg &= ~Z_GMC; /* Z_GMC = normal (0) */ - writel(reg, &pmt->pmt_tri_a); + pinmux_tristate_disable(PIN_GMC); #endif /* CONFIG_TEGRA2_ENABLE_UARTD */ } @@ -183,16 +165,8 @@ static void clock_init_mmc(void) u32 reg; /* Do the SDMMC resets/clock enables */ - - /* Assert Reset to SDMMC4 */ - reg = readl(&clkrst->crc_rst_dev_l); - reg |= SWR_SDMMC4_RST; /* SWR_SDMMC4_RST = 1 */ - writel(reg, &clkrst->crc_rst_dev_l); - - /* Enable clk to SDMMC4 */ - reg = readl(&clkrst->crc_clk_out_enb_l); - reg |= CLK_ENB_SDMMC4; /* CLK_ENB_SDMMC4 = 1 */ - writel(reg, &clkrst->crc_clk_out_enb_l); + reset_set_enable(PERIPH_ID_SDMMC4, 1); + clock_enable(PERIPH_ID_SDMMC4); /* Enable pllp_out0 to SDMMC4 */ reg = readl(&clkrst->crc_clk_src_sdmmc4); @@ -206,20 +180,10 @@ static void clock_init_mmc(void) */ udelay(2); - /* De-assert reset to SDMMC4 */ - reg = readl(&clkrst->crc_rst_dev_l); - reg &= ~SWR_SDMMC4_RST; /* SWR_SDMMC4_RST = 0 */ - writel(reg, &clkrst->crc_rst_dev_l); - - /* Assert Reset to SDMMC3 */ - reg = readl(&clkrst->crc_rst_dev_u); - reg |= SWR_SDMMC3_RST; /* SWR_SDMMC3_RST = 1 */ - writel(reg, &clkrst->crc_rst_dev_u); + reset_set_enable(PERIPH_ID_SDMMC4, 1); - /* Enable clk to SDMMC3 */ - reg = readl(&clkrst->crc_clk_out_enb_u); - reg |= CLK_ENB_SDMMC3; /* CLK_ENB_SDMMC3 = 1 */ - writel(reg, &clkrst->crc_clk_out_enb_u); + reset_set_enable(PERIPH_ID_SDMMC3, 1); + clock_enable(PERIPH_ID_SDMMC3); /* Enable pllp_out0 to SDMMC4, set divisor to 11 for 20MHz */ reg = readl(&clkrst->crc_clk_src_sdmmc3); @@ -230,10 +194,7 @@ static void clock_init_mmc(void) /* wait for 2us */ udelay(2); - /* De-assert reset to SDMMC3 */ - reg = readl(&clkrst->crc_rst_dev_u); - reg &= ~SWR_SDMMC3_RST; /* SWR_SDMMC3_RST = 0 */ - writel(reg, &clkrst->crc_rst_dev_u); + reset_set_enable(PERIPH_ID_SDMMC3, 0); } /* @@ -257,13 +218,9 @@ static void pin_mux_mmc(void) reg |= (3 << 0); /* GME_SEL [1:0] = 11 SDIO4 */ writel(reg, &pmt->pmt_ctl_d); - reg = readl(&pmt->pmt_tri_a); - reg &= ~Z_ATB; /* Z_ATB = normal (0) */ - reg &= ~Z_GMA; /* Z_GMA = normal (0) */ - writel(reg, &pmt->pmt_tri_a); - reg = readl(&pmt->pmt_tri_b); - reg &= ~Z_GME; /* Z_GME = normal (0) */ - writel(reg, &pmt->pmt_tri_b); + pinmux_tristate_disable(PIN_ATB); + pinmux_tristate_disable(PIN_GMA); + pinmux_tristate_disable(PIN_GME); /* SDMMC3 */ /* SDIO3_CLK, SDIO3_CMD, SDIO3_DAT[3:0] */ @@ -274,13 +231,9 @@ static void pin_mux_mmc(void) reg |= (2 << 14); /* SDD_SEL [15:14] = 01 SDIO3 */ writel(reg, &pmt->pmt_ctl_d); - reg = readl(&pmt->pmt_tri_b); - reg &= ~Z_SDC; /* Z_SDC = normal (0) */ - reg &= ~Z_SDD; /* Z_SDD = normal (0) */ - writel(reg, &pmt->pmt_tri_b); - reg = readl(&pmt->pmt_tri_d); - reg &= ~Z_SDB; /* Z_SDB = normal (0) */ - writel(reg, &pmt->pmt_tri_d); + pinmux_tristate_disable(PIN_SDC); + pinmux_tristate_disable(PIN_SDD); + pinmux_tristate_disable(PIN_SDB); } /* @@ -318,8 +271,6 @@ int board_init(void) { /* boot param addr */ gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100); - /* board id for Linux */ - gd->bd->bi_arch_number = CONFIG_MACH_TYPE; return 0; } diff --git a/board/pandora/pandora.c b/board/pandora/pandora.c index 992e9f7625..58a676d455 100644 --- a/board/pandora/pandora.c +++ b/board/pandora/pandora.c @@ -32,7 +32,9 @@ #include <common.h> #include <twl4030.h> #include <asm/io.h> +#include <asm/arch/mmc_host_def.h> #include <asm/arch/mux.h> +#include <asm/arch/gpio.h> #include <asm/arch/sys_proto.h> #include <asm/mach-types.h> #include "pandora.h" @@ -102,3 +104,11 @@ void set_muxconf_regs(void) { MUX_PANDORA(); } + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0); + return 0; +} +#endif diff --git a/board/ronetix/pm9261/led.c b/board/ronetix/pm9261/led.c index ff21ce667b..f65987035d 100644 --- a/board/ronetix/pm9261/led.c +++ b/board/ronetix/pm9261/led.c @@ -24,17 +24,16 @@ */ #include <common.h> -#include <asm/arch/at91sam9261.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_pio.h> -#include <asm/arch/io.h> +#include <asm/arch/gpio.h> +#include <asm/io.h> void coloured_LED_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; /* Enable clock */ - writel(1 << AT91SAM9261_ID_PIOC, &pmc->pcer); + writel(1 << ATMEL_ID_PIOC, &pmc->pcer); at91_set_pio_output(CONFIG_RED_LED, 1); at91_set_pio_output(CONFIG_GREEN_LED, 1); diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c index 2c50fe8e6e..871b94ada7 100644 --- a/board/ronetix/pm9261/pm9261.c +++ b/board/ronetix/pm9261/pm9261.c @@ -26,17 +26,15 @@ #include <common.h> #include <asm/sizes.h> -#include <asm/arch/at91sam9261.h> +#include <asm/io.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> #include <asm/arch/at91_matrix.h> -#include <asm/arch/at91_pio.h> #include <asm/arch/clk.h> -#include <asm/arch/at91_pio.h> -#include <asm/arch/io.h> -#include <asm/arch/hardware.h> +#include <asm/arch/gpio.h> + #include <lcd.h> #include <atmel_lcdc.h> #include <dataflash.h> @@ -56,9 +54,9 @@ DECLARE_GLOBAL_DATA_PTR; static void pm9261_nand_hw_init(void) { unsigned long csa; - at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE; - at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; /* Enable CS3 */ csa = readl(&matrix->csa) | AT91_MATRIX_CSA_EBI_CS3A; @@ -86,8 +84,8 @@ static void pm9261_nand_hw_init(void) AT91_SMC_MODE_TDF_CYCLE(2), &smc->cs[3].mode); - writel(1 << AT91SAM9261_ID_PIOA | - 1 << AT91SAM9261_ID_PIOC, + writel(1 << ATMEL_ID_PIOA | + 1 << ATMEL_ID_PIOC, &pmc->pcer); /* Configure RDY/BSY */ @@ -105,8 +103,8 @@ static void pm9261_nand_hw_init(void) #ifdef CONFIG_DRIVER_DM9000 static void pm9261_dm9000_hw_init(void) { - at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE; - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; /* Configure SMC CS2 for DM9000 */ writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) | @@ -127,7 +125,7 @@ static void pm9261_dm9000_hw_init(void) &smc->cs[2].mode); /* Configure Interrupt pin as input, no pull-up */ - writel(1 << AT91SAM9261_ID_PIOA, &pmc->pcer); + writel(1 << ATMEL_ID_PIOA, &pmc->pcer); at91_set_pio_input(AT91_PIO_PORTA, 24, 0); } #endif @@ -147,7 +145,7 @@ vidinfo_t panel_info = { vl_vsync_len: 1, vl_upper_margin:1, vl_lower_margin:0, - mmio: AT91SAM9261_LCDC_BASE, + mmio: ATMEL_BASE_LCDC, }; void lcd_enable(void) @@ -162,7 +160,7 @@ void lcd_disable(void) static void pm9261_lcd_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* LCDHSYNC */ at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* LCDDOTCK */ @@ -189,7 +187,7 @@ static void pm9261_lcd_hw_init(void) writel(1 << 17, &pmc->scer); /* LCD controller Clock, AT91SAM9261 only */ - gd->fb_base = AT91SAM9261_SRAM_BASE; + gd->fb_base = ATMEL_BASE_SRAM; } #ifdef CONFIG_LCD_INFO @@ -241,13 +239,13 @@ void lcd_show_board_info(void) int board_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; /* Enable Ctrlc */ console_init_f(); - writel(1 << AT91SAM9261_ID_PIOA | - 1 << AT91SAM9261_ID_PIOC, + writel(1 << ATMEL_ID_PIOA | + 1 << ATMEL_ID_PIOC, &pmc->pcer); /* arch number of PM9261-Board */ @@ -256,7 +254,7 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - at91_serial_hw_init(); + at91_seriald_hw_init(); #ifdef CONFIG_CMD_NAND pm9261_nand_hw_init(); #endif diff --git a/board/ronetix/pm9263/led.c b/board/ronetix/pm9263/led.c index 4e585a4751..d6eb69f04a 100644 --- a/board/ronetix/pm9263/led.c +++ b/board/ronetix/pm9263/led.c @@ -24,17 +24,16 @@ */ #include <common.h> -#include <asm/arch/at91sam9263.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_pio.h> -#include <asm/arch/io.h> +#include <asm/arch/gpio.h> +#include <asm/io.h> void coloured_LED_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; /* Enable clock */ - writel(1 << AT91SAM9263_ID_PIOB, &pmc->pcer); + writel(1 << ATMEL_ID_PIOB, &pmc->pcer); at91_set_pio_output(CONFIG_RED_LED, 1); at91_set_pio_output(CONFIG_GREEN_LED, 1); diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c index 8071600081..cfc9847ccc 100644 --- a/board/ronetix/pm9263/pm9263.c +++ b/board/ronetix/pm9263/pm9263.c @@ -26,16 +26,14 @@ #include <common.h> #include <asm/sizes.h> -#include <asm/arch/at91sam9263.h> +#include <asm/io.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> #include <asm/arch/at91_matrix.h> -#include <asm/arch/at91_pio.h> #include <asm/arch/clk.h> -#include <asm/arch/io.h> -#include <asm/arch/hardware.h> +#include <asm/arch/gpio.h> #include <lcd.h> #include <atmel_lcdc.h> #include <dataflash.h> @@ -55,8 +53,8 @@ DECLARE_GLOBAL_DATA_PTR; static void pm9263_nand_hw_init(void) { unsigned long csa; - at91_smc_t *smc = (at91_smc_t *) AT91_SMC0_BASE; - at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC0; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; /* Enable CS3 */ csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A; @@ -95,7 +93,7 @@ static void pm9263_nand_hw_init(void) #ifdef CONFIG_MACB static void pm9263_macb_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; /* * PB27 enables the 50MHz oscillator for Ethernet PHY @@ -106,7 +104,7 @@ static void pm9263_macb_hw_init(void) at91_set_pio_value(AT91_PIO_PORTB, 27, 1); /* 1- enable, 0 - disable */ /* Enable clock */ - writel(1 << AT91SAM9263_ID_EMAC, &pmc->pcer); + writel(1 << ATMEL_ID_EMAC, &pmc->pcer); /* * Disable pull-up on: @@ -145,7 +143,7 @@ vidinfo_t panel_info = { vl_vsync_len: 1, vl_upper_margin:1, vl_lower_margin:0, - mmio: AT91SAM9263_LCDC_BASE, + mmio: ATMEL_BASE_LCDC, }; void lcd_enable(void) @@ -168,8 +166,8 @@ static int pm9263_lcd_hw_psram_init(void) { volatile uint16_t x; unsigned long csa; - at91_smc_t *smc = (at91_smc_t *) AT91_SMC1_BASE; - at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC1; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; /* Enable CS3 3.3v, no pull-ups */ csa = readl(&matrix->csa[1]) | AT91_MATRIX_CSA_DBPUC | @@ -249,7 +247,7 @@ static int pm9263_lcd_hw_psram_init(void) static void pm9263_lcd_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDVSYNC */ at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */ @@ -275,7 +273,7 @@ static void pm9263_lcd_hw_init(void) at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */ at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */ - writel(1 << AT91SAM9263_ID_LCDC, &pmc->pcer); + writel(1 << ATMEL_ID_LCDC, &pmc->pcer); /* Power Control */ at91_set_pio_output(AT91_PIO_PORTA, 22, 1); @@ -285,9 +283,9 @@ static void pm9263_lcd_hw_init(void) /* initialize te PSRAM */ int stat = pm9263_lcd_hw_psram_init(); - gd->fb_base = (stat == 0) ? PHYS_PSRAM : AT91SAM9263_SRAM0_BASE; + gd->fb_base = (stat == 0) ? PHYS_PSRAM : ATMEL_BASE_SRAM0; #else - gd->fb_base = AT91SAM9263_SRAM0_BASE; + gd->fb_base = ATMEL_BASE_SRAM0; #endif } @@ -341,14 +339,14 @@ void lcd_show_board_info(void) int board_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; /* Enable Ctrlc */ console_init_f(); - writel((1 << AT91SAM9263_ID_PIOA) | - (1 << AT91SAM9263_ID_PIOCDE) | - (1 << AT91SAM9263_ID_PIOB), + writel((1 << ATMEL_ID_PIOA) | + (1 << ATMEL_ID_PIOCDE) | + (1 << ATMEL_ID_PIOB), &pmc->pcer); /* arch number of AT91SAM9263EK-Board */ @@ -357,7 +355,7 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - at91_serial_hw_init(); + at91_seriald_hw_init(); #ifdef CONFIG_CMD_NAND pm9263_nand_hw_init(); #endif @@ -400,7 +398,7 @@ int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x01); + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x01); #endif return rc; } @@ -417,7 +415,7 @@ int checkboard (void) ss = "(PSRAM)"; break; - case AT91SAM9263_SRAM0_BASE: + case ATMEL_BASE_SRAM0: ss = "(Internal SRAM)"; break; diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c index fa69599e90..f3374a4429 100644 --- a/board/ronetix/pm9g45/pm9g45.c +++ b/board/ronetix/pm9g45/pm9g45.c @@ -29,16 +29,14 @@ #include <common.h> #include <asm/sizes.h> -#include <asm/arch/at91sam9g45.h> +#include <asm/io.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> #include <asm/arch/at91_matrix.h> -#include <asm/arch/at91_pio.h> +#include <asm/arch/gpio.h> #include <asm/arch/clk.h> -#include <asm/arch/io.h> -#include <asm/arch/hardware.h> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include <net.h> #endif @@ -54,9 +52,9 @@ DECLARE_GLOBAL_DATA_PTR; static void pm9g45_nand_hw_init(void) { unsigned long csa; - at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE; - at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; /* Enable CS3 */ csa = readl(&matrix->ccr[6]) | AT91_MATRIX_CSA_EBI_CS3A; @@ -80,7 +78,7 @@ static void pm9g45_nand_hw_init(void) AT91_SMC_MODE_TDF_CYCLE(3), &smc->cs[3].mode); - writel(1 << AT91SAM9G45_ID_PIOC, &pmc->pcer); + writel(1 << ATMEL_ID_PIOC, &pmc->pcer); #ifdef CONFIG_SYS_NAND_READY_PIN /* Configure RDY/BSY */ @@ -95,7 +93,7 @@ static void pm9g45_nand_hw_init(void) #ifdef CONFIG_MACB static void pm9g45_macb_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; /* * PD2 enables the 50MHz oscillator for Ethernet PHY @@ -106,7 +104,7 @@ static void pm9g45_macb_hw_init(void) at91_set_pio_value(AT91_PIO_PORTD, 2, 1); /* 1- enable, 0 - disable */ /* Enable clock */ - writel(1 << AT91SAM9G45_ID_EMAC, &pmc->pcer); + writel(1 << ATMEL_ID_EMAC, &pmc->pcer); /* * Disable pull-up on: @@ -131,22 +129,22 @@ static void pm9g45_macb_hw_init(void) int board_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; /* Enable Ctrlc */ console_init_f(); - writel((1 << AT91SAM9G45_ID_PIOA) | - (1 << AT91SAM9G45_ID_PIOB) | - (1 << AT91SAM9G45_ID_PIOC) | - (1 << AT91SAM9G45_ID_PIODE), &pmc->pcer); + writel((1 << ATMEL_ID_PIOA) | + (1 << ATMEL_ID_PIOB) | + (1 << ATMEL_ID_PIOC) | + (1 << ATMEL_ID_PIODE), &pmc->pcer); /* arch number of AT91SAM9M10G45EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_PM9G45; /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - at91_serial_hw_init(); + at91_seriald_hw_init(); #ifdef CONFIG_CMD_NAND pm9g45_nand_hw_init(); #endif @@ -188,7 +186,7 @@ int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x01); + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x01); #endif return rc; } diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c index 581935d054..e24cd29f37 100644 --- a/board/samsung/goni/goni.c +++ b/board/samsung/goni/goni.c @@ -73,7 +73,7 @@ int board_mmc_init(bd_t *bis) int i; /* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */ - gpio_direction_output(&s5pc110_gpio->j2, 7, 1); + s5p_gpio_direction_output(&s5pc110_gpio->j2, 7, 1); /* * MMC0 GPIO @@ -86,11 +86,11 @@ int board_mmc_init(bd_t *bis) if (i == 2) continue; /* GPG0[0:6] special function 2 */ - gpio_cfg_pin(&s5pc110_gpio->g0, i, 0x2); + s5p_gpio_cfg_pin(&s5pc110_gpio->g0, i, 0x2); /* GPG0[0:6] pull disable */ - gpio_set_pull(&s5pc110_gpio->g0, i, GPIO_PULL_NONE); + s5p_gpio_set_pull(&s5pc110_gpio->g0, i, GPIO_PULL_NONE); /* GPG0[0:6] drv 4x */ - gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X); + s5p_gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X); } return s5p_mmc_init(0, 4); diff --git a/board/armadillo/Makefile b/board/samsung/origen/Makefile index 3b524524f9..f5c6507337 100644 --- a/board/armadillo/Makefile +++ b/board/samsung/origen/Makefile @@ -1,10 +1,5 @@ # -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2002 -# Sysgo Real-Time Solutions, GmbH <www.elinos.com> -# Marius Groeger <mgroeger@sysgo.de> +# Copyright (C) 2011 Samsung Electronics # # See file CREDITS for list of people who contributed to this # project. @@ -29,21 +24,35 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := armadillo.o flash.o -SOBJS := lowlevel_init.o +SOBJS := mem_setup.o +SOBJS += lowlevel_init.o + +ifndef CONFIG_SPL_BUILD +COBJS += origen.o +endif + +ifdef CONFIG_SPL_BUILD +COBJS += mmc_boot.o +endif SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +ALL +=$(obj).depend $(LIB) + +ifdef CONFIG_SPL_BUILD +ALL += tools/mk$(BOARD)spl.exe +endif -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) +all: $(ALL) -clean: - rm -f $(SOBJS) $(OBJS) +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend +ifdef CONFIG_SPL_BUILD +tools/mk$(BOARD)spl.exe: tools/mkv310_image.c + $(HOSTCC) tools/mkv310_image.c -o tools/mk$(BOARD)spl.exe +endif ######################################################################### diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S new file mode 100644 index 0000000000..ddca1e21fc --- /dev/null +++ b/board/samsung/origen/lowlevel_init.S @@ -0,0 +1,357 @@ +/* + * Lowlevel setup for ORIGEN board based on S5PV310 + * + * Copyright (C) 2011 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/cpu.h> +#include "origen_setup.h" +/* + * Register usages: + * + * r5 has zero always + * r7 has GPIO part1 base 0x11400000 + * r6 has GPIO part2 base 0x11000000 + */ + +_TEXT_BASE: + .word CONFIG_SYS_TEXT_BASE + + .globl lowlevel_init +lowlevel_init: + push {lr} + + /* r5 has always zero */ + mov r5, #0 + ldr r7, =S5PC210_GPIO_PART1_BASE + ldr r6, =S5PC210_GPIO_PART2_BASE + + /* check reset status */ + ldr r0, =(S5PC210_POWER_BASE + INFORM1_OFFSET) + ldr r1, [r0] + + /* AFTR wakeup reset */ + ldr r2, =S5P_CHECK_DIDLE + cmp r1, r2 + beq exit_wakeup + + /* LPA wakeup reset */ + ldr r2, =S5P_CHECK_LPA + cmp r1, r2 + beq exit_wakeup + + /* Sleep wakeup reset */ + ldr r2, =S5P_CHECK_SLEEP + cmp r1, r2 + beq wakeup_reset + + /* + * If U-boot is already running in ram, no need to relocate U-Boot. + * Memory controller must be configured before relocating U-Boot + * in ram. + */ + ldr r0, =0x0ffffff /* r0 <- Mask Bits*/ + bic r1, pc, r0 /* pc <- current addr of code */ + /* r1 <- unmasked bits of pc */ + ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */ + bic r2, r2, r0 /* r2 <- unmasked bits of r2*/ + cmp r1, r2 /* compare r1, r2 */ + beq 1f /* r0 == r1 then skip sdram init */ + + /* init system clock */ + bl system_clock_init + + /* Memory initialize */ + bl mem_ctrl_asm_init + +1: + /* for UART */ + bl uart_asm_init + bl tzpc_init + pop {pc} + +wakeup_reset: + bl system_clock_init + bl mem_ctrl_asm_init + bl tzpc_init + +exit_wakeup: + /* Load return address and jump to kernel */ + ldr r0, =(S5PC210_POWER_BASE + INFORM0_OFFSET) + + /* r1 = physical address of s5pc210_cpu_resume function */ + ldr r1, [r0] + + /* Jump to kernel*/ + mov pc, r1 + nop + nop + +/* + * system_clock_init: Initialize core clock and bus clock. + * void system_clock_init(void) + */ +system_clock_init: + push {lr} + ldr r0, =S5PC210_CLOCK_BASE + + /* APLL(1), MPLL(1), CORE(0), HPM(0) */ + ldr r1, =CLK_SRC_CPU_VAL + ldr r2, =CLK_SRC_CPU_OFFSET + str r1, [r0, r2] + + /* wait ?us */ + mov r1, #0x10000 +2: subs r1, r1, #1 + bne 2b + + ldr r1, =CLK_SRC_TOP0_VAL + ldr r2, =CLK_SRC_TOP0_OFFSET + str r1, [r0, r2] + + ldr r1, =CLK_SRC_TOP1_VAL + ldr r2, =CLK_SRC_TOP1_OFFSET + str r1, [r0, r2] + + /* DMC */ + ldr r1, =CLK_SRC_DMC_VAL + ldr r2, =CLK_SRC_DMC_OFFSET + str r1, [r0, r2] + + /*CLK_SRC_LEFTBUS */ + ldr r1, =CLK_SRC_LEFTBUS_VAL + ldr r2, =CLK_SRC_LEFTBUS_OFFSET + str r1, [r0, r2] + + /*CLK_SRC_RIGHTBUS */ + ldr r1, =CLK_SRC_RIGHTBUS_VAL + ldr r2, =CLK_SRC_RIGHTBUS_OFFSET + str r1, [r0, r2] + + /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */ + ldr r1, =CLK_SRC_FSYS_VAL + ldr r2, =CLK_SRC_FSYS_OFFSET + str r1, [r0, r2] + + /* UART[0:4] */ + ldr r1, =CLK_SRC_PERIL0_VAL + ldr r2, =CLK_SRC_PERIL0_OFFSET + str r1, [r0, r2] + + /* wait ?us */ + mov r1, #0x10000 +3: subs r1, r1, #1 + bne 3b + + /* CLK_DIV_CPU0 */ + ldr r1, =CLK_DIV_CPU0_VAL + ldr r2, =CLK_DIV_CPU0_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_CPU1 */ + ldr r1, =CLK_DIV_CPU1_VAL + ldr r2, =CLK_DIV_CPU1_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_DMC0 */ + ldr r1, =CLK_DIV_DMC0_VAL + ldr r2, =CLK_DIV_DMC0_OFFSET + str r1, [r0, r2] + + /*CLK_DIV_DMC1 */ + ldr r1, =CLK_DIV_DMC1_VAL + ldr r2, =CLK_DIV_DMC1_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_LEFTBUS */ + ldr r1, =CLK_DIV_LEFTBUS_VAL + ldr r2, =CLK_DIV_LEFTBUS_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_RIGHTBUS */ + ldr r1, =CLK_DIV_RIGHTBUS_VAL + ldr r2, =CLK_DIV_RIGHTBUS_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_TOP */ + ldr r1, =CLK_DIV_TOP_VAL + ldr r2, =CLK_DIV_TOP_OFFSET + str r1, [r0, r2] + + /* MMC[0:1] */ + ldr r1, =CLK_DIV_FSYS1_VAL /* 800(MPLL) / (15 + 1) */ + ldr r2, =CLK_DIV_FSYS1_OFFSET + str r1, [r0, r2] + + /* MMC[2:3] */ + ldr r1, =CLK_DIV_FSYS2_VAL /* 800(MPLL) / (15 + 1) */ + ldr r2, =CLK_DIV_FSYS2_OFFSET + str r1, [r0, r2] + + /* MMC4 */ + ldr r1, =CLK_DIV_FSYS3_VAL /* 800(MPLL) / (15 + 1) */ + ldr r2, =CLK_DIV_FSYS3_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_PERIL0: UART Clock Divisors */ + ldr r1, =CLK_DIV_PERIL0_VAL + ldr r2, =CLK_DIV_PERIL0_OFFSET + str r1, [r0, r2] + + /* Set PLL locktime */ + ldr r1, =PLL_LOCKTIME + ldr r2, =APLL_LOCK_OFFSET + str r1, [r0, r2] + + ldr r1, =PLL_LOCKTIME + ldr r2, =MPLL_LOCK_OFFSET + str r1, [r0, r2] + + ldr r1, =PLL_LOCKTIME + ldr r2, =EPLL_LOCK_OFFSET + str r1, [r0, r2] + + ldr r1, =PLL_LOCKTIME + ldr r2, =VPLL_LOCK_OFFSET + str r1, [r0, r2] + + /* APLL_CON1 */ + ldr r1, =APLL_CON1_VAL + ldr r2, =APLL_CON1_OFFSET + str r1, [r0, r2] + + /* APLL_CON0 */ + ldr r1, =APLL_CON0_VAL + ldr r2, =APLL_CON0_OFFSET + str r1, [r0, r2] + + /* MPLL_CON1 */ + ldr r1, =MPLL_CON1_VAL + ldr r2, =MPLL_CON1_OFFSET + str r1, [r0, r2] + + /* MPLL_CON0 */ + ldr r1, =MPLL_CON0_VAL + ldr r2, =MPLL_CON0_OFFSET + str r1, [r0, r2] + + /* EPLL */ + ldr r1, =EPLL_CON1_VAL + ldr r2, =EPLL_CON1_OFFSET + str r1, [r0, r2] + + /* EPLL_CON0 */ + ldr r1, =EPLL_CON0_VAL + ldr r2, =EPLL_CON0_OFFSET + str r1, [r0, r2] + + /* VPLL_CON1 */ + ldr r1, =VPLL_CON1_VAL + ldr r2, =VPLL_CON1_OFFSET + str r1, [r0, r2] + + /* VPLL_CON0 */ + ldr r1, =VPLL_CON0_VAL + ldr r2, =VPLL_CON0_OFFSET + str r1, [r0, r2] + + /* wait ?us */ + mov r1, #0x30000 +4: subs r1, r1, #1 + bne 4b + + pop {pc} +/* + * uart_asm_init: Initialize UART in asm mode, 115200bps fixed. + * void uart_asm_init(void) + */ + .globl uart_asm_init +uart_asm_init: + + /* setup UART0-UART3 GPIOs (part1) */ + mov r0, r7 + ldr r1, =S5PC210_GPIO_A0_CON_VAL + str r1, [r0, #S5PC210_GPIO_A0_CON_OFFSET] + ldr r1, =S5PC210_GPIO_A1_CON_VAL + str r1, [r0, #S5PC210_GPIO_A1_CON_OFFSET] + + ldr r0, =S5PC210_UART_BASE + add r0, r0, #S5PC210_DEFAULT_UART_OFFSET + + ldr r1, =ULCON_VAL + str r1, [r0, #ULCON_OFFSET] + ldr r1, =UCON_VAL + str r1, [r0, #UCON_OFFSET] + ldr r1, =UFCON_VAL + str r1, [r0, #UFCON_OFFSET] + ldr r1, =UBRDIV_VAL + str r1, [r0, #UBRDIV_OFFSET] + ldr r1, =UFRACVAL_VAL + str r1, [r0, #UFRACVAL_OFFSET] + mov pc, lr + nop + nop + nop + +/* Setting TZPC[TrustZone Protection Controller] */ +tzpc_init: + ldr r0, =TZPC0_BASE + mov r1, #R0SIZE + str r1, [r0] + mov r1, #DECPROTXSET + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + ldr r0, =TZPC1_BASE + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + ldr r0, =TZPC2_BASE + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + ldr r0, =TZPC3_BASE + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + ldr r0, =TZPC4_BASE + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + ldr r0, =TZPC5_BASE + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + mov pc, lr diff --git a/board/samsung/origen/mem_setup.S b/board/samsung/origen/mem_setup.S new file mode 100644 index 0000000000..a798848ba1 --- /dev/null +++ b/board/samsung/origen/mem_setup.S @@ -0,0 +1,421 @@ +/* + * Memory setup for ORIGEN board based on S5PV310 + * + * Copyright (C) 2011 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include "origen_setup.h" +#define SET_MIU + + .globl mem_ctrl_asm_init +mem_ctrl_asm_init: + /* + * Async bridge configuration at CPU_core: + * 1: half_sync + * 0: full_sync + */ + ldr r0, =ASYNC_CONFIG + mov r1, #1 + str r1, [r0] + +#ifdef SET_MIU + ldr r0, =S5PC210_MIU_BASE + /* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */ + ldr r1, =0x20001507 + str r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET] + + /* Update MIU Configuration */ + ldr r1, =0x00000001 + str r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET] +#endif + /* DREX0 */ + ldr r0, =S5PC210_DMC0_BASE + + /* + * DLL Parameter Setting: + * Termination: Enable R/W + * Phase Delay for DQS Cleaning: 180' Shift + */ + ldr r1, =0xe0000086 + str r1, [r0, #DMC_PHYCONTROL1] + + /* + * ZQ Calibration + * Termination: Disable + * Auto Calibration Start: Enable + */ + ldr r1, =0xE3855703 + str r1, [r0, #DMC_PHYZQCONTROL] + + /* Wait ?us*/ + mov r2, #0x100000 +1: subs r2, r2, #1 + bne 1b + + /* + * Update DLL Information: + * Force DLL Resyncronization + */ + ldr r1, =0xe000008e + str r1, [r0, #DMC_PHYCONTROL1] + + /* Reset Force DLL Resyncronization */ + ldr r1, =0xe0000086 + str r1, [r0, #DMC_PHYCONTROL1] + + /* Enable Differential DQS, DLL Off*/ + ldr r1, =0x71101008 + str r1, [r0, #DMC_PHYCONTROL0] + + /* Activate PHY DLL: DLL On */ + ldr r1, =0x7110100A + str r1, [r0, #DMC_PHYCONTROL0] + + /* Set DLL Parameters */ + ldr r1, =0xe0000086 + str r1, [r0, #DMC_PHYCONTROL1] + + /* DLL Start */ + ldr r1, =0x7110100B + str r1, [r0, #DMC_PHYCONTROL0] + + ldr r1, =0x00000000 + str r1, [r0, #DMC_PHYCONTROL2] + + /* Set Clock Ratio of Bus clock to Memory Clock */ + ldr r1, =0x0FFF301a + str r1, [r0, #DMC_CONCONTROL] + + /* + * Memor Burst length: 8 + * Number of chips: 2 + * Memory Bus width: 32 bit + * Memory Type: DDR3 + * Additional Latancy for PLL: 1 Cycle + */ + ldr r1, =0x00312640 + str r1, [r0, #DMC_MEMCONTROL] + + /* + * Memory Configuration Chip 0 + * Address Mapping: Interleaved + * Number of Column address Bits: 10 bits + * Number of Rows Address Bits: 14 + * Number of Banks: 8 + */ + ldr r1, =0x20e01323 + str r1, [r0, #DMC_MEMCONFIG0] + + /* + * Memory Configuration Chip 1 + * Address Mapping: Interleaved + * Number of Column address Bits: 10 bits + * Number of Rows Address Bits: 14 + * Number of Banks: 8 + */ + ldr r1, =0x40e01323 + str r1, [r0, #DMC_MEMCONFIG1] + + /* Config Precharge Policy */ + ldr r1, =0xff000000 + str r1, [r0, #DMC_PRECHCONFIG] + + /* + * TimingAref, TimingRow, TimingData, TimingPower Setting: + * Values as per Memory AC Parameters + */ + ldr r1, =0x000000BB + str r1, [r0, #DMC_TIMINGAREF] + ldr r1, =0x4046654f + str r1, [r0, #DMC_TIMINGROW] + ldr r1, =0x46400506 + str r1, [r0, #DMC_TIMINGDATA] + ldr r1, =0x52000A3C + str r1, [r0, #DMC_TIMINGPOWER] + + /* Chip0: NOP Command: Assert and Hold CKE to high level */ + ldr r1, =0x07000000 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +2: subs r2, r2, #1 + bne 2b + + /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ + ldr r1, =0x00020000 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00030000 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00010002 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00000328 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +3: subs r2, r2, #1 + bne 3b + + /* Chip0: ZQINIT */ + ldr r1, =0x0a000000 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +4: subs r2, r2, #1 + bne 4b + + /* Chip1: NOP Command: Assert and Hold CKE to high level */ + ldr r1, =0x07100000 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +5: subs r2, r2, #1 + bne 5b + + /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ + ldr r1, =0x00120000 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00130000 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00110002 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00100328 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +6: subs r2, r2, #1 + bne 6b + + /* Chip1: ZQINIT */ + ldr r1, =0x0a100000 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +7: subs r2, r2, #1 + bne 7b + + ldr r1, =0xe000008e + str r1, [r0, #DMC_PHYCONTROL1] + ldr r1, =0xe0000086 + str r1, [r0, #DMC_PHYCONTROL1] + + /* Wait ?us*/ + mov r2, #0x100000 +8: subs r2, r2, #1 + bne 8b + + /* DREX1 */ + ldr r0, =S5PC210_DMC1_BASE @0x10410000 + + /* + * DLL Parameter Setting: + * Termination: Enable R/W + * Phase Delay for DQS Cleaning: 180' Shift + */ + ldr r1, =0xe0000086 + str r1, [r0, #DMC_PHYCONTROL1] + + /* + * ZQ Calibration: + * Termination: Disable + * Auto Calibration Start: Enable + */ + ldr r1, =0xE3855703 + str r1, [r0, #DMC_PHYZQCONTROL] + + /* Wait ?us*/ + mov r2, #0x100000 +1: subs r2, r2, #1 + bne 1b + + /* + * Update DLL Information: + * Force DLL Resyncronization + */ + ldr r1, =0xe000008e + str r1, [r0, #DMC_PHYCONTROL1] + + /* Reset Force DLL Resyncronization */ + ldr r1, =0xe0000086 + str r1, [r0, #DMC_PHYCONTROL1] + + /* Enable Differential DQS, DLL Off*/ + ldr r1, =0x71101008 + str r1, [r0, #DMC_PHYCONTROL0] + + /* Activate PHY DLL: DLL On */ + ldr r1, =0x7110100A + str r1, [r0, #DMC_PHYCONTROL0] + + /* Set DLL Parameters */ + ldr r1, =0xe0000086 + str r1, [r0, #DMC_PHYCONTROL1] + + /* DLL Start */ + ldr r1, =0x7110100B + str r1, [r0, #DMC_PHYCONTROL0] + + ldr r1, =0x00000000 + str r1, [r0, #DMC_PHYCONTROL2] + + /* Set Clock Ratio of Bus clock to Memory Clock */ + ldr r1, =0x0FFF301a + str r1, [r0, #DMC_CONCONTROL] + + /* + * Memor Burst length: 8 + * Number of chips: 2 + * Memory Bus width: 32 bit + * Memory Type: DDR3 + * Additional Latancy for PLL: 1 Cycle + */ + ldr r1, =0x00312640 + str r1, [r0, #DMC_MEMCONTROL] + + /* + * Memory Configuration Chip 0 + * Address Mapping: Interleaved + * Number of Column address Bits: 10 bits + * Number of Rows Address Bits: 14 + * Number of Banks: 8 + */ + ldr r1, =0x20e01323 + str r1, [r0, #DMC_MEMCONFIG0] + + /* + * Memory Configuration Chip 1 + * Address Mapping: Interleaved + * Number of Column address Bits: 10 bits + * Number of Rows Address Bits: 14 + * Number of Banks: 8 + */ + ldr r1, =0x40e01323 + str r1, [r0, #DMC_MEMCONFIG1] + + /* Config Precharge Policy */ + ldr r1, =0xff000000 + str r1, [r0, #DMC_PRECHCONFIG] + + /* + * TimingAref, TimingRow, TimingData, TimingPower Setting: + * Values as per Memory AC Parameters + */ + ldr r1, =0x000000BB + str r1, [r0, #DMC_TIMINGAREF] + ldr r1, =0x4046654f + str r1, [r0, #DMC_TIMINGROW] + ldr r1, =0x46400506 + str r1, [r0, #DMC_TIMINGDATA] + ldr r1, =0x52000A3C + str r1, [r0, #DMC_TIMINGPOWER] + + /* Chip0: NOP Command: Assert and Hold CKE to high level */ + ldr r1, =0x07000000 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +2: subs r2, r2, #1 + bne 2b + + /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ + ldr r1, =0x00020000 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00030000 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00010002 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00000328 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +3: subs r2, r2, #1 + bne 3b + + /* Chip 0: ZQINIT */ + ldr r1, =0x0a000000 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +4: subs r2, r2, #1 + bne 4b + + /* Chip1: NOP Command: Assert and Hold CKE to high level */ + ldr r1, =0x07100000 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +5: subs r2, r2, #1 + bne 5b + + /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ + ldr r1, =0x00120000 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00130000 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00110002 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00100328 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +6: subs r2, r2, #1 + bne 6b + + /* Chip1: ZQINIT */ + ldr r1, =0x0a100000 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +7: subs r2, r2, #1 + bne 7b + + ldr r1, =0xe000008e + str r1, [r0, #DMC_PHYCONTROL1] + ldr r1, =0xe0000086 + str r1, [r0, #DMC_PHYCONTROL1] + + /* Wait ?us*/ + mov r2, #0x100000 +8: subs r2, r2, #1 + bne 8b + + /* turn on DREX0, DREX1 */ + ldr r0, =S5PC210_DMC0_BASE + ldr r1, =0x0FFF303a + str r1, [r0, #DMC_CONCONTROL] + + ldr r0, =S5PC210_DMC1_BASE + ldr r1, =0x0FFF303a + str r1, [r0, #DMC_CONCONTROL] + + mov pc, lr diff --git a/board/samsung/origen/mmc_boot.c b/board/samsung/origen/mmc_boot.c new file mode 100644 index 0000000000..072f16146c --- /dev/null +++ b/board/samsung/origen/mmc_boot.c @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2011 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include<common.h> +#include<config.h> + +/* +* Copy U-boot from mmc to RAM: +* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains +* Pointer to API (Data transfer from mmc to ram) +*/ +void copy_uboot_to_ram(void) +{ + u32 (*copy_bl2)(u32, u32, u32) = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR; + + copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE); +} + +void board_init_f(unsigned long bootflag) +{ + __attribute__((noreturn)) void (*uboot)(void); + copy_uboot_to_ram(); + + /* Jump to U-Boot image */ + uboot = (void *)CONFIG_SYS_TEXT_BASE; + (*uboot)(); + /* Never returns Here */ +} + +/* Place Holders */ +void board_init_r(gd_t *id, ulong dest_addr) +{ + /* Function attribute is no-return */ + /* This Function never executes */ + while (1) + ; +} + +void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {} diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c new file mode 100644 index 0000000000..8882646eca --- /dev/null +++ b/board/samsung/origen/origen.c @@ -0,0 +1,109 @@ +/* + * Copyright (C) 2011 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc.h> + +DECLARE_GLOBAL_DATA_PTR; +struct s5pc210_gpio_part1 *gpio1; +struct s5pc210_gpio_part2 *gpio2; + +int board_init(void) +{ + gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE; + gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE; + + gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) + + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) + + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) + + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE); + + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, \ + PHYS_SDRAM_1_SIZE); + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, \ + PHYS_SDRAM_2_SIZE); + gd->bd->bi_dram[2].start = PHYS_SDRAM_3; + gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3, \ + PHYS_SDRAM_3_SIZE); + gd->bd->bi_dram[3].start = PHYS_SDRAM_4; + gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4, \ + PHYS_SDRAM_4_SIZE); +} + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + printf("\nBoard: ORIGEN\n"); + return 0; +} +#endif + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + int i, err; + + /* + * MMC2 SD card GPIO: + * + * GPK2[0] SD_2_CLK(2) + * GPK2[1] SD_2_CMD(2) + * GPK2[2] SD_2_CDn + * GPK2[3:6] SD_2_DATA[0:3](2) + */ + for (i = 0; i < 7; i++) { + /* GPK2[0:6] special function 2 */ + s5p_gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2)); + + /* GPK2[0:6] drv 4x */ + s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X); + + /* GPK2[0:1] pull disable */ + if (i == 0 || i == 1) { + s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE); + continue; + } + + /* GPK2[2:6] pull up */ + s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP); + } + + err = s5p_mmc_init(2, 4); + return err; +} +#endif diff --git a/board/samsung/origen/origen_setup.h b/board/samsung/origen/origen_setup.h new file mode 100644 index 0000000000..63d85d8a8c --- /dev/null +++ b/board/samsung/origen/origen_setup.h @@ -0,0 +1,546 @@ +/* + * Machine Specific Values for ORIGEN board based on S5PV310 + * + * Copyright (C) 2011 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ORIGEN_SETUP_H +#define _ORIGEN_SETUP_H + +#include <config.h> +#include <version.h> +#include <asm/arch/cpu.h> + +/* Offsets of clock registers (sources and dividers) */ +#define CLK_SRC_CPU_OFFSET 0x14200 +#define CLK_DIV_CPU0_OFFSET 0x14500 +#define CLK_DIV_CPU1_OFFSET 0x14504 + +#define CLK_SRC_DMC_OFFSET 0x10200 +#define CLK_DIV_DMC0_OFFSET 0x10500 +#define CLK_DIV_DMC1_OFFSET 0x10504 + +#define CLK_SRC_TOP0_OFFSET 0xC210 +#define CLK_SRC_TOP1_OFFSET 0xC214 +#define CLK_DIV_TOP_OFFSET 0xC510 + +#define CLK_SRC_LEFTBUS_OFFSET 0x4200 +#define CLK_DIV_LEFTBUS_OFFSET 0x4500 + +#define CLK_SRC_RIGHTBUS_OFFSET 0x8200 +#define CLK_DIV_RIGHTBUS_OFFSET 0x8500 + +#define CLK_SRC_FSYS_OFFSET 0xC240 +#define CLK_DIV_FSYS1_OFFSET 0xC544 +#define CLK_DIV_FSYS2_OFFSET 0xC548 +#define CLK_DIV_FSYS3_OFFSET 0xC54C + +#define CLK_SRC_PERIL0_OFFSET 0xC250 +#define CLK_DIV_PERIL0_OFFSET 0xC550 + +#define APLL_LOCK_OFFSET 0x14000 +#define MPLL_LOCK_OFFSET 0x14008 +#define APLL_CON0_OFFSET 0x14100 +#define APLL_CON1_OFFSET 0x14104 +#define MPLL_CON0_OFFSET 0x14108 +#define MPLL_CON1_OFFSET 0x1410C + +#define EPLL_LOCK_OFFSET 0xC010 +#define VPLL_LOCK_OFFSET 0xC020 +#define EPLL_CON0_OFFSET 0xC110 +#define EPLL_CON1_OFFSET 0xC114 +#define VPLL_CON0_OFFSET 0xC120 +#define VPLL_CON1_OFFSET 0xC124 + +/* DMC: DRAM Controllor Register offsets */ +#define DMC_CONCONTROL 0x00 +#define DMC_MEMCONTROL 0x04 +#define DMC_MEMCONFIG0 0x08 +#define DMC_MEMCONFIG1 0x0C +#define DMC_DIRECTCMD 0x10 +#define DMC_PRECHCONFIG 0x14 +#define DMC_PHYCONTROL0 0x18 +#define DMC_PHYCONTROL1 0x1C +#define DMC_PHYCONTROL2 0x20 +#define DMC_TIMINGAREF 0x30 +#define DMC_TIMINGROW 0x34 +#define DMC_TIMINGDATA 0x38 +#define DMC_TIMINGPOWER 0x3C +#define DMC_PHYZQCONTROL 0x44 + +/* Bus Configuration Register Address */ +#define ASYNC_CONFIG 0x10010350 + +/* MIU Config Register Offsets*/ +#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400 +#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00 + +/* Offset for inform registers */ +#define INFORM0_OFFSET 0x800 +#define INFORM1_OFFSET 0x804 + +/* GPIO Offsets for UART: GPIO Contol Register */ +#define S5PC210_GPIO_A0_CON_OFFSET 0x00 +#define S5PC210_GPIO_A1_CON_OFFSET 0x20 + +/* UART Register offsets */ +#define ULCON_OFFSET 0x00 +#define UCON_OFFSET 0x04 +#define UFCON_OFFSET 0x08 +#define UBRDIV_OFFSET 0x28 +#define UFRACVAL_OFFSET 0x2C + +/* TZPC : Register Offsets */ +#define TZPC0_BASE 0x10110000 +#define TZPC1_BASE 0x10120000 +#define TZPC2_BASE 0x10130000 +#define TZPC3_BASE 0x10140000 +#define TZPC4_BASE 0x10150000 +#define TZPC5_BASE 0x10160000 + +#define TZPC_DECPROT0SET_OFFSET 0x804 +#define TZPC_DECPROT1SET_OFFSET 0x810 +#define TZPC_DECPROT2SET_OFFSET 0x81C +#define TZPC_DECPROT3SET_OFFSET 0x828 + +/* CLK_SRC_CPU */ +#define MUX_HPM_SEL_MOUTAPLL 0x0 +#define MUX_HPM_SEL_SCLKMPLL 0x1 +#define MUX_CORE_SEL_MOUTAPLL 0x0 +#define MUX_CORE_SEL_SCLKMPLL 0x1 +#define MUX_MPLL_SEL_FILPLL 0x0 +#define MUX_MPLL_SEL_MOUTMPLLFOUT 0x1 +#define MUX_APLL_SEL_FILPLL 0x0 +#define MUX_APLL_SEL_MOUTMPLLFOUT 0x1 +#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL_MOUTAPLL << 20) \ + | (MUX_CORE_SEL_MOUTAPLL << 16) \ + | (MUX_MPLL_SEL_MOUTMPLLFOUT << 8)\ + | (MUX_APLL_SEL_MOUTMPLLFOUT << 0)) + +/* CLK_DIV_CPU0 */ +#define APLL_RATIO 0x0 +#define PCLK_DBG_RATIO 0x1 +#define ATB_RATIO 0x3 +#define PERIPH_RATIO 0x3 +#define COREM1_RATIO 0x7 +#define COREM0_RATIO 0x3 +#define CORE_RATIO 0x0 +#define CLK_DIV_CPU0_VAL ((APLL_RATIO << 24) \ + | (PCLK_DBG_RATIO << 20) \ + | (ATB_RATIO << 16) \ + | (PERIPH_RATIO << 12) \ + | (COREM1_RATIO << 8) \ + | (COREM0_RATIO << 4) \ + | (CORE_RATIO << 0)) + +/* CLK_DIV_CPU1 */ +#define HPM_RATIO 0x0 +#define COPY_RATIO 0x3 +#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) | (COPY_RATIO)) + +/* CLK_SRC_DMC */ +#define MUX_PWI_SEL_XXTI 0x0 +#define MUX_PWI_SEL_XUSBXTI 0x1 +#define MUX_PWI_SEL_SCLK_HDMI24M 0x2 +#define MUX_PWI_SEL_SCLK_USBPHY0 0x3 +#define MUX_PWI_SEL_SCLK_USBPHY1 0x4 +#define MUX_PWI_SEL_SCLK_HDMIPHY 0x5 +#define MUX_PWI_SEL_SCLKMPLL 0x6 +#define MUX_PWI_SEL_SCLKEPLL 0x7 +#define MUX_PWI_SEL_SCLKVPLL 0x8 +#define MUX_DPHY_SEL_SCLKMPLL 0x0 +#define MUX_DPHY_SEL_SCLKAPLL 0x1 +#define MUX_DMC_BUS_SEL_SCLKMPLL 0x0 +#define MUX_DMC_BUS_SEL_SCLKAPLL 0x1 +#define CLK_SRC_DMC_VAL ((MUX_PWI_SEL_XUSBXTI << 16) \ + | (MUX_DPHY_SEL_SCLKMPLL << 8) \ + | (MUX_DMC_BUS_SEL_SCLKMPLL << 4)) + +/* CLK_DIV_DMC0 */ +#define CORE_TIMERS_RATIO 0x1 +#define COPY2_RATIO 0x3 +#define DMCP_RATIO 0x1 +#define DMCD_RATIO 0x1 +#define DMC_RATIO 0x1 +#define DPHY_RATIO 0x1 +#define ACP_PCLK_RATIO 0x1 +#define ACP_RATIO 0x3 +#define CLK_DIV_DMC0_VAL ((CORE_TIMERS_RATIO << 28) \ + | (COPY2_RATIO << 24) \ + | (DMCP_RATIO << 20) \ + | (DMCD_RATIO << 16) \ + | (DMC_RATIO << 12) \ + | (DPHY_RATIO << 8) \ + | (ACP_PCLK_RATIO << 4) \ + | (ACP_RATIO << 0)) + +/* CLK_DIV_DMC1 */ +#define DPM_RATIO 0x1 +#define DVSEM_RATIO 0x1 +#define PWI_RATIO 0x1 +#define CLK_DIV_DMC1_VAL ((DPM_RATIO << 24) \ + | (DVSEM_RATIO << 16) \ + | (PWI_RATIO << 8)) + +/* CLK_SRC_TOP0 */ +#define MUX_ONENAND_SEL_ACLK_133 0x0 +#define MUX_ONENAND_SEL_ACLK_160 0x1 +#define MUX_ACLK_133_SEL_SCLKMPLL 0x0 +#define MUX_ACLK_133_SEL_SCLKAPLL 0x1 +#define MUX_ACLK_160_SEL_SCLKMPLL 0x0 +#define MUX_ACLK_160_SEL_SCLKAPLL 0x1 +#define MUX_ACLK_100_SEL_SCLKMPLL 0x0 +#define MUX_ACLK_100_SEL_SCLKAPLL 0x1 +#define MUX_ACLK_200_SEL_SCLKMPLL 0x0 +#define MUX_ACLK_200_SEL_SCLKAPLL 0x1 +#define MUX_VPLL_SEL_FINPLL 0x0 +#define MUX_VPLL_SEL_FOUTVPLL 0x1 +#define MUX_EPLL_SEL_FINPLL 0x0 +#define MUX_EPLL_SEL_FOUTEPLL 0x1 +#define MUX_ONENAND_1_SEL_MOUTONENAND 0x0 +#define MUX_ONENAND_1_SEL_SCLKVPLL 0x1 +#define CLK_SRC_TOP0_VAL ((MUX_ONENAND_SEL_ACLK_133 << 28) \ + | (MUX_ACLK_133_SEL_SCLKMPLL << 24) \ + | (MUX_ACLK_160_SEL_SCLKMPLL << 20) \ + | (MUX_ACLK_100_SEL_SCLKMPLL << 16) \ + | (MUX_ACLK_200_SEL_SCLKMPLL << 12) \ + | (MUX_VPLL_SEL_FINPLL << 8) \ + | (MUX_EPLL_SEL_FINPLL << 4)\ + | (MUX_ONENAND_1_SEL_MOUTONENAND << 0)) + +/* CLK_SRC_TOP1 */ +#define VPLLSRC_SEL_FINPLL 0x0 +#define VPLLSRC_SEL_SCLKHDMI24M 0x1 +#define CLK_SRC_TOP1_VAL (VPLLSRC_SEL_FINPLL) + +/* CLK_DIV_TOP */ +#define ONENAND_RATIO 0x0 +#define ACLK_133_RATIO 0x5 +#define ACLK_160_RATIO 0x4 +#define ACLK_100_RATIO 0x7 +#define ACLK_200_RATIO 0x3 +#define CLK_DIV_TOP_VAL ((ONENAND_RATIO << 16) \ + | (ACLK_133_RATIO << 12)\ + | (ACLK_160_RATIO << 8) \ + | (ACLK_100_RATIO << 4) \ + | (ACLK_200_RATIO << 0)) + +/* CLK_SRC_LEFTBUS */ +#define MUX_GDL_SEL_SCLKMPLL 0x0 +#define MUX_GDL_SEL_SCLKAPLL 0x1 +#define CLK_SRC_LEFTBUS_VAL (MUX_GDL_SEL_SCLKMPLL) + +/* CLK_DIV_LEFTBUS */ +#define GPL_RATIO 0x1 +#define GDL_RATIO 0x3 +#define CLK_DIV_LEFTBUS_VAL ((GPL_RATIO << 4) | (GDL_RATIO)) + +/* CLK_SRC_RIGHTBUS */ +#define MUX_GDR_SEL_SCLKMPLL 0x0 +#define MUX_GDR_SEL_SCLKAPLL 0x1 +#define CLK_SRC_RIGHTBUS_VAL (MUX_GDR_SEL_SCLKMPLL) + +/* CLK_DIV_RIGHTBUS */ +#define GPR_RATIO 0x1 +#define GDR_RATIO 0x3 +#define CLK_DIV_RIGHTBUS_VAL ((GPR_RATIO << 4) | (GDR_RATIO)) + +/* CLK_SRS_FSYS: 6 = SCLKMPLL */ +#define SATA_SEL_SCLKMPLL 0 +#define SATA_SEL_SCLKAPLL 1 + +#define MMC_SEL_XXTI 0 +#define MMC_SEL_XUSBXTI 1 +#define MMC_SEL_SCLK_HDMI24M 2 +#define MMC_SEL_SCLK_USBPHY0 3 +#define MMC_SEL_SCLK_USBPHY1 4 +#define MMC_SEL_SCLK_HDMIPHY 5 +#define MMC_SEL_SCLKMPLL 6 +#define MMC_SEL_SCLKEPLL 7 +#define MMC_SEL_SCLKVPLL 8 + +#define MMCC0_SEL MMC_SEL_SCLKMPLL +#define MMCC1_SEL MMC_SEL_SCLKMPLL +#define MMCC2_SEL MMC_SEL_SCLKMPLL +#define MMCC3_SEL MMC_SEL_SCLKMPLL +#define MMCC4_SEL MMC_SEL_SCLKMPLL +#define CLK_SRC_FSYS_VAL ((SATA_SEL_SCLKMPLL << 24) \ + | (MMCC4_SEL << 16) \ + | (MMCC3_SEL << 12) \ + | (MMCC2_SEL << 8) \ + | (MMCC1_SEL << 4) \ + | (MMCC0_SEL << 0)) + +/* SCLK_MMC[0-4] = MOUTMMC[0-4]/(MMC[0-4]_RATIO + 1)/(MMC[0-4]_PRE_RATIO +1) */ +/* CLK_DIV_FSYS1 */ +#define MMC0_RATIO 0xF +#define MMC0_PRE_RATIO 0x0 +#define MMC1_RATIO 0xF +#define MMC1_PRE_RATIO 0x0 +#define CLK_DIV_FSYS1_VAL ((MMC1_PRE_RATIO << 24) \ + | (MMC1_RATIO << 16) \ + | (MMC0_PRE_RATIO << 8) \ + | (MMC0_RATIO << 0)) + +/* CLK_DIV_FSYS2 */ +#define MMC2_RATIO 0xF +#define MMC2_PRE_RATIO 0x0 +#define MMC3_RATIO 0xF +#define MMC3_PRE_RATIO 0x0 +#define CLK_DIV_FSYS2_VAL ((MMC3_PRE_RATIO << 24) \ + | (MMC3_RATIO << 16) \ + | (MMC2_PRE_RATIO << 8) \ + | (MMC2_RATIO << 0)) + +/* CLK_DIV_FSYS3 */ +#define MMC4_RATIO 0xF +#define MMC4_PRE_RATIO 0x0 +#define CLK_DIV_FSYS3_VAL ((MMC4_PRE_RATIO << 8) \ + | (MMC4_RATIO << 0)) + +/* CLK_SRC_PERIL0 */ +#define UART_SEL_XXTI 0 +#define UART_SEL_XUSBXTI 1 +#define UART_SEL_SCLK_HDMI24M 2 +#define UART_SEL_SCLK_USBPHY0 3 +#define UART_SEL_SCLK_USBPHY1 4 +#define UART_SEL_SCLK_HDMIPHY 5 +#define UART_SEL_SCLKMPLL 6 +#define UART_SEL_SCLKEPLL 7 +#define UART_SEL_SCLKVPLL 8 + +#define UART0_SEL UART_SEL_SCLKMPLL +#define UART1_SEL UART_SEL_SCLKMPLL +#define UART2_SEL UART_SEL_SCLKMPLL +#define UART3_SEL UART_SEL_SCLKMPLL +#define UART4_SEL UART_SEL_SCLKMPLL +#define CLK_SRC_PERIL0_VAL ((UART4_SEL << 16) \ + | (UART3_SEL << 12) \ + | (UART2_SEL << 8) \ + | (UART1_SEL << 4) \ + | (UART0_SEL << 0)) + +/* SCLK_UART[0-4] = MOUTUART[0-4]/(UART[0-4]_RATIO + 1) */ +/* CLK_DIV_PERIL0 */ +#define UART0_RATIO 7 +#define UART1_RATIO 7 +#define UART2_RATIO 7 +#define UART3_RATIO 7 +#define UART4_RATIO 7 +#define CLK_DIV_PERIL0_VAL ((UART4_RATIO << 16) \ + | (UART3_RATIO << 12) \ + | (UART2_RATIO << 8) \ + | (UART1_RATIO << 4) \ + | (UART0_RATIO << 0)) + +/* Required period to generate a stable clock output */ +/* PLL_LOCK_TIME */ +#define PLL_LOCKTIME 0x1C20 + +/* PLL Values */ +#define DISABLE 0 +#define ENABLE 1 +#define SET_PLL(mdiv, pdiv, sdiv) ((ENABLE << 31)\ + | (mdiv << 16) \ + | (pdiv << 8) \ + | (sdiv << 0)) + +/* APLL_CON0 */ +#define APLL_MDIV 0xFA +#define APLL_PDIV 0x6 +#define APLL_SDIV 0x1 +#define APLL_CON0_VAL SET_PLL(APLL_MDIV, APLL_PDIV, APLL_SDIV) + +/* APLL_CON1 */ +#define APLL_AFC_ENB 0x1 +#define APLL_AFC 0xC +#define APLL_CON1_VAL ((APLL_AFC_ENB << 31) | (APLL_AFC << 0)) + +/* MPLL_CON0 */ +#define MPLL_MDIV 0xC8 +#define MPLL_PDIV 0x6 +#define MPLL_SDIV 0x1 +#define MPLL_CON0_VAL SET_PLL(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV) + +/* MPLL_CON1 */ +#define MPLL_AFC_ENB 0x0 +#define MPLL_AFC 0x1C +#define MPLL_CON1_VAL ((MPLL_AFC_ENB << 31) | (MPLL_AFC << 0)) + +/* EPLL_CON0 */ +#define EPLL_MDIV 0x30 +#define EPLL_PDIV 0x3 +#define EPLL_SDIV 0x2 +#define EPLL_CON0_VAL SET_PLL(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV) + +/* EPLL_CON1 */ +#define EPLL_K 0x0 +#define EPLL_CON1_VAL (EPLL_K >> 0) + +/* VPLL_CON0 */ +#define VPLL_MDIV 0x35 +#define VPLL_PDIV 0x3 +#define VPLL_SDIV 0x2 +#define VPLL_CON0_VAL SET_PLL(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV) + +/* VPLL_CON1 */ +#define VPLL_SSCG_EN DISABLE +#define VPLL_SEL_PF_DN_SPREAD 0x0 +#define VPLL_MRR 0x11 +#define VPLL_MFR 0x0 +#define VPLL_K 0x400 +#define VPLL_CON1_VAL ((VPLL_SSCG_EN << 31)\ + | (VPLL_SEL_PF_DN_SPREAD << 29) \ + | (VPLL_MRR << 24) \ + | (VPLL_MFR << 16) \ + | (VPLL_K << 0)) +/* + * UART GPIO_A0/GPIO_A1 Control Register Value + * 0x2: UART Function + */ +#define S5PC210_GPIO_A0_CON_VAL 0x22222222 +#define S5PC210_GPIO_A1_CON_VAL 0x222222 + +/* ULCON: UART Line Control Value 8N1 */ +#define WORD_LEN_5_BIT 0x00 +#define WORD_LEN_6_BIT 0x01 +#define WORD_LEN_7_BIT 0x02 +#define WORD_LEN_8_BIT 0x03 + +#define STOP_BIT_1 0x00 +#define STOP_BIT_2 0x01 + +#define NO_PARITY 0x00 +#define ODD_PARITY 0x4 +#define EVEN_PARITY 0x5 +#define FORCED_PARITY_CHECK_AS_1 0x6 +#define FORCED_PARITY_CHECK_AS_0 0x7 + +#define INFRAMODE_NORMAL 0x00 +#define INFRAMODE_INFRARED 0x01 + +#define ULCON_VAL ((INFRAMODE_NORMAL << 6) \ + | (NO_PARITY << 3) \ + | (STOP_BIT_1 << 2) \ + | (WORD_LEN_8_BIT << 0)) + +/* + * UCON: UART Control Value + * Tx_interrupt Type: Level + * Rx_interrupt Type: Level + * Rx Timeout Enabled: Yes + * Rx-Error Atatus_Int Enable: Yes + * Loop_Back: No + * Break Signal: No + * Transmit mode : Interrupt request/polling + * Receive mode : Interrupt request/polling + */ +#define TX_PULSE_INTERRUPT 0 +#define TX_LEVEL_INTERRUPT 1 +#define RX_PULSE_INTERRUPT 0 +#define RX_LEVEL_INTERRUPT 1 + +#define RX_TIME_OUT ENABLE +#define RX_ERROR_STATE_INT_ENB ENABLE +#define LOOP_BACK DISABLE +#define BREAK_SIGNAL DISABLE + +#define TX_MODE_DISABLED 0X00 +#define TX_MODE_IRQ_OR_POLL 0X01 +#define TX_MODE_DMA 0X02 + +#define RX_MODE_DISABLED 0X00 +#define RX_MODE_IRQ_OR_POLL 0X01 +#define RX_MODE_DMA 0X02 + +#define UCON_VAL ((TX_LEVEL_INTERRUPT << 9) \ + | (RX_LEVEL_INTERRUPT << 8) \ + | (RX_TIME_OUT << 7) \ + | (RX_ERROR_STATE_INT_ENB << 6) \ + | (LOOP_BACK << 5) \ + | (BREAK_SIGNAL << 4) \ + | (TX_MODE_IRQ_OR_POLL << 2) \ + | (RX_MODE_IRQ_OR_POLL << 0)) + +/* + * UFCON: UART FIFO Control Value + * Tx FIFO Trigger LEVEL: 2 Bytes (001) + * Rx FIFO Trigger LEVEL: 2 Bytes (001) + * Tx Fifo Reset: No + * Rx Fifo Reset: No + * FIFO Enable: Yes + */ +#define TX_FIFO_TRIGGER_LEVEL_0_BYTES 0x00 +#define TX_FIFO_TRIGGER_LEVEL_2_BYTES 0x1 +#define TX_FIFO_TRIGGER_LEVEL_4_BYTES 0x2 +#define TX_FIFO_TRIGGER_LEVEL_6_BYTES 0x3 +#define TX_FIFO_TRIGGER_LEVEL_8_BYTES 0x4 +#define TX_FIFO_TRIGGER_LEVEL_10_BYTES 0x5 +#define TX_FIFO_TRIGGER_LEVEL_12_BYTES 0x6 +#define TX_FIFO_TRIGGER_LEVEL_14_BYTES 0x7 + +#define RX_FIFO_TRIGGER_LEVEL_2_BYTES 0x0 +#define RX_FIFO_TRIGGER_LEVEL_4_BYTES 0x1 +#define RX_FIFO_TRIGGER_LEVEL_6_BYTES 0x2 +#define RX_FIFO_TRIGGER_LEVEL_8_BYTES 0x3 +#define RX_FIFO_TRIGGER_LEVEL_10_BYTES 0x4 +#define RX_FIFO_TRIGGER_LEVEL_12_BYTES 0x5 +#define RX_FIFO_TRIGGER_LEVEL_14_BYTES 0x6 +#define RX_FIFO_TRIGGER_LEVEL_16_BYTES 0x7 + +#define TX_FIFO_TRIGGER_LEVEL TX_FIFO_TRIGGER_LEVEL_2_BYTES +#define RX_FIFO_TRIGGER_LEVEL RX_FIFO_TRIGGER_LEVEL_4_BYTES +#define TX_FIFO_RESET DISABLE +#define RX_FIFO_RESET DISABLE +#define FIFO_ENABLE ENABLE +#define UFCON_VAL ((TX_FIFO_TRIGGER_LEVEL << 8) \ + | (RX_FIFO_TRIGGER_LEVEL << 4) \ + | (TX_FIFO_RESET << 2) \ + | (RX_FIFO_RESET << 1) \ + | (FIFO_ENABLE << 0)) +/* + * Baud Rate Division Value + * 115200 BAUD: + * UBRDIV_VAL = SCLK_UART/((115200 * 16) - 1) + * UBRDIV_VAL = (800 MHz)/((115200 * 16) - 1) + */ +#define UBRDIV_VAL 0x35 + +/* + * Fractional Part of Baud Rate Divisor: + * 115200 BAUD: + * UBRFRACVAL = ((((SCLK_UART*10/(115200*16) -10))%10)*16/10) + * UBRFRACVAL = ((((800MHz*10/(115200*16) -10))%10)*16/10) + */ +#define UFRACVAL_VAL 0x4 + +/* + * TZPC Register Value : + * R0SIZE: 0x0 : Size of secured ram + */ +#define R0SIZE 0x0 + +/* + * TZPC Decode Protection Register Value : + * DECPROTXSET: 0xFF : Set Decode region to non-secure + */ +#define DECPROTXSET 0xFF +#endif diff --git a/board/samsung/origen/tools/mkv310_image.c b/board/samsung/origen/tools/mkv310_image.c new file mode 100644 index 0000000000..158aab5cf9 --- /dev/null +++ b/board/samsung/origen/tools/mkv310_image.c @@ -0,0 +1,126 @@ +/* + * Copyright (C) 2011 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <fcntl.h> +#include <errno.h> +#include <string.h> +#include <sys/stat.h> + +#define BUFSIZE (16*1024) +#define IMG_SIZE (16*1024) +#define SPL_HEADER_SIZE 16 +#define FILE_PERM (S_IRUSR | S_IWUSR | S_IRGRP \ + | S_IWGRP | S_IROTH | S_IWOTH) +#define SPL_HEADER "S5PC210 HEADER " +/* +* Requirement: +* IROM code reads first 14K bytes from boot device. +* It then calculates the checksum of 14K-4 bytes and compare with data at +* 14K-4 offset. +* +* This function takes two filenames: +* IN "u-boot-spl.bin" and +* OUT "$(BOARD)-spl.bin as filenames. +* It reads the "u-boot-spl.bin" in 16K buffer. +* It calculates checksum of 14K-4 Bytes and stores at 14K-4 offset in buffer. +* It writes the buffer to "$(BOARD)-spl.bin" file. +*/ + +int main(int argc, char **argv) +{ + int i, len; + unsigned char buffer[BUFSIZE] = {0}; + int ifd, ofd; + unsigned int checksum = 0, count; + + if (argc != 3) { + printf(" %d Wrong number of arguments\n", argc); + exit(EXIT_FAILURE); + } + + ifd = open(argv[1], O_RDONLY); + if (ifd < 0) { + fprintf(stderr, "%s: Can't open %s: %s\n", + argv[0], argv[1], strerror(errno)); + exit(EXIT_FAILURE); + } + + ofd = open(argv[2], O_WRONLY | O_CREAT | O_TRUNC, FILE_PERM); + if (ifd < 0) { + fprintf(stderr, "%s: Can't open %s: %s\n", + argv[0], argv[2], strerror(errno)); + if (ifd) + close(ifd); + exit(EXIT_FAILURE); + } + + len = lseek(ifd, 0, SEEK_END); + lseek(ifd, 0, SEEK_SET); + + memcpy(&buffer[0], SPL_HEADER, SPL_HEADER_SIZE); + + count = (len < (IMG_SIZE - SPL_HEADER_SIZE)) + ? len : (IMG_SIZE - SPL_HEADER_SIZE); + + if (read(ifd, buffer + SPL_HEADER_SIZE, count) != count) { + fprintf(stderr, "%s: Can't read %s: %s\n", + argv[0], argv[1], strerror(errno)); + + if (ifd) + close(ifd); + if (ofd) + close(ofd); + + exit(EXIT_FAILURE); + } + + for (i = 0; i < IMG_SIZE - SPL_HEADER_SIZE; i++) + checksum += buffer[i+16]; + + *(ulong *)buffer ^= 0x1f; + *(ulong *)(buffer+4) ^= checksum; + + for (i = 1; i < SPL_HEADER_SIZE; i++) + buffer[i] ^= buffer[i-1]; + + if (write(ofd, buffer, BUFSIZE) != BUFSIZE) { + fprintf(stderr, "%s: Can't write %s: %s\n", + argv[0], argv[2], strerror(errno)); + + if (ifd) + close(ifd); + if (ofd) + close(ofd); + + exit(EXIT_FAILURE); + } + + if (ifd) + close(ifd); + if (ofd) + close(ofd); + + return EXIT_SUCCESS; +} diff --git a/board/samsung/smdk2400/Makefile b/board/samsung/smdk2400/Makefile deleted file mode 100644 index 0c45d02a65..0000000000 --- a/board/samsung/smdk2400/Makefile +++ /dev/null @@ -1,51 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := smdk2400.o flash.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/samsung/smdk2400/config.mk b/board/samsung/smdk2400/config.mk deleted file mode 100644 index 4c27dc3044..0000000000 --- a/board/samsung/smdk2400/config.mk +++ /dev/null @@ -1,25 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# SAMSUNG board with S3C2400X (ARM920T) CPU -# -# see http://www.samsung.com/ for more information on SAMSUNG -# - -# -# SAMSUNG has 1 bank of 32 MB DRAM -# -# 0C00'0000 to 0E00'0000 -# -# Linux-Kernel is expected to be at 0cf0'0000, entry 0cf0'0000 -# optionally with a ramdisk at 0c80'0000 -# -# we load ourself to 0CF80000 (must be high enough not to be -# overwritten by the uncompessing Linux kernel) -# -# download area is 0C80'0000 -# - - -CONFIG_SYS_TEXT_BASE = 0x0CF80000 diff --git a/board/samsung/smdk2400/flash.c b/board/samsung/smdk2400/flash.c deleted file mode 100644 index 47382fe8f2..0000000000 --- a/board/samsung/smdk2400/flash.c +++ /dev/null @@ -1,492 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* #define DEBUG */ - -#include <common.h> -#include <environment.h> - -#define FLASH_BANK_SIZE 0x1000000 /* 2 x 8 MB */ -#define MAIN_SECT_SIZE 0x40000 /* 2 x 128 kB */ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - - -#define CMD_READ_ARRAY 0x00FF00FF -#define CMD_IDENTIFY 0x00900090 -#define CMD_ERASE_SETUP 0x00200020 -#define CMD_ERASE_CONFIRM 0x00D000D0 -#define CMD_PROGRAM 0x00400040 -#define CMD_RESUME 0x00D000D0 -#define CMD_SUSPEND 0x00B000B0 -#define CMD_STATUS_READ 0x00700070 -#define CMD_STATUS_RESET 0x00500050 - -#define BIT_BUSY 0x00800080 -#define BIT_ERASE_SUSPEND 0x00400040 -#define BIT_ERASE_ERROR 0x00200020 -#define BIT_PROGRAM_ERROR 0x00100010 -#define BIT_VPP_RANGE_ERROR 0x00080008 -#define BIT_PROGRAM_SUSPEND 0x00040004 -#define BIT_PROTECT_ERROR 0x00020002 -#define BIT_UNDEFINED 0x00010001 - -#define BIT_SEQUENCE_ERROR 0x00300030 -#define BIT_TIMEOUT 0x80000000 - -/*----------------------------------------------------------------------- - */ - -ulong flash_init (void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - - flash_info[i].flash_id = - (INTEL_MANUFACT & FLASH_VENDMASK) | - (INTEL_ID_28F640J3A & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - if (i == 0) - flashbase = CONFIG_SYS_FLASH_BASE; - else - panic ("configured too many flash banks!\n"); - for (j = 0; j < flash_info[i].sector_count; j++) { - flash_info[i].start[j] = flashbase; - - /* uniform sector size */ - flashbase += MAIN_SECT_SIZE; - } - size += flash_info[i].size; - } - - /* - * Protect monitor and environment sectors - */ - flash_protect ( FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect ( FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, &flash_info[0]); - -#ifdef CONFIG_ENV_ADDR_REDUND - flash_protect ( FLAG_PROTECT_SET, - CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); -#endif - - return size; -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (INTEL_MANUFACT & FLASH_VENDMASK): - printf ("Intel: "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (INTEL_ID_28F640J3A & FLASH_TYPEMASK): - printf ("2x 28F640J3A (64Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - goto Done; - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - -Done: ; -} - -/*----------------------------------------------------------------------- - */ - -int flash_error (ulong code) -{ - /* Check bit patterns */ - /* SR.7=0 is busy, SR.7=1 is ready */ - /* all other flags indicate error on 1 */ - /* SR.0 is undefined */ - /* Timeout is our faked flag */ - - /* sequence is described in Intel 290644-005 document */ - - /* check Timeout */ - if (code & BIT_TIMEOUT) { - puts ("Timeout\n"); - return ERR_TIMOUT; - } - - /* check Busy, SR.7 */ - if (~code & BIT_BUSY) { - puts ("Busy\n"); - return ERR_PROG_ERROR; - } - - /* check Vpp low, SR.3 */ - if (code & BIT_VPP_RANGE_ERROR) { - puts ("Vpp range error\n"); - return ERR_PROG_ERROR; - } - - /* check Device Protect Error, SR.1 */ - if (code & BIT_PROTECT_ERROR) { - puts ("Device protect error\n"); - return ERR_PROG_ERROR; - } - - /* check Command Seq Error, SR.4 & SR.5 */ - if (code & BIT_SEQUENCE_ERROR) { - puts ("Command seqence error\n"); - return ERR_PROG_ERROR; - } - - /* check Block Erase Error, SR.5 */ - if (code & BIT_ERASE_ERROR) { - puts ("Block erase error\n"); - return ERR_PROG_ERROR; - } - - /* check Program Error, SR.4 */ - if (code & BIT_PROGRAM_ERROR) { - puts ("Program error\n"); - return ERR_PROG_ERROR; - } - - /* check Block Erase Suspended, SR.6 */ - if (code & BIT_ERASE_SUSPEND) { - puts ("Block erase suspended\n"); - return ERR_PROG_ERROR; - } - - /* check Program Suspended, SR.2 */ - if (code & BIT_PROGRAM_SUSPEND) { - puts ("Program suspended\n"); - return ERR_PROG_ERROR; - } - - /* OK, no error */ - return ERR_OK; -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - ulong result, result1; - int iflag, prot, sect; - int rc = ERR_OK; - ulong start; - -#ifdef USE_920T_MMU - int cflag; -#endif - - debug ("flash_erase: s_first %d s_last %d\n", s_first, s_last); - - /* first look for protection bits */ - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != - (INTEL_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ -#ifdef USE_920T_MMU - cflag = dcache_status (); - dcache_disable (); -#endif - iflag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { - - debug ("Erasing sector %2d @ %08lX... ", - sect, info->start[sect]); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - if (info->protect[sect] == 0) { /* not protected */ - vu_long *addr = (vu_long *) (info->start[sect]); - ulong bsR7, bsR7_2, bsR5, bsR5_2; - - /* *addr = CMD_STATUS_RESET; */ - *addr = CMD_ERASE_SETUP; - *addr = CMD_ERASE_CONFIRM; - - /* wait until flash is ready */ - do { - /* check timeout */ - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - *addr = CMD_STATUS_RESET; - result = BIT_TIMEOUT; - break; - } - - *addr = CMD_STATUS_READ; - result = *addr; - bsR7 = result & (1 << 7); - bsR7_2 = result & (1 << 23); - } while (!bsR7 | !bsR7_2); - - *addr = CMD_STATUS_READ; - result1 = *addr; - bsR5 = result1 & (1 << 5); - bsR5_2 = result1 & (1 << 21); -#ifdef SAMSUNG_FLASH_DEBUG - printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2); - if (bsR5 != 0 && bsR5_2 != 0) - printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2); -#endif - - *addr = CMD_READ_ARRAY; - *addr = CMD_RESUME; - - if ((rc = flash_error (result)) != ERR_OK) - goto outahere; -#if 0 - printf ("ok.\n"); - } else { /* it was protected */ - - printf ("protected!\n"); -#endif - } - } - -outahere: - /* allow flash to settle - wait 10 ms */ - udelay_masked (10000); - - if (iflag) - enable_interrupts (); - -#ifdef USE_920T_MMU - if (cflag) - dcache_enable (); -#endif - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash - */ - -static int write_word (flash_info_t * info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long *) dest; - ulong result; - int rc = ERR_OK; - int iflag; - ulong start; - -#ifdef USE_920T_MMU - int cflag; -#endif - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ -#ifdef USE_920T_MMU - cflag = dcache_status (); - dcache_disable (); -#endif - iflag = disable_interrupts (); - - /* *addr = CMD_STATUS_RESET; */ - *addr = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait until flash is ready */ - do { - /* check timeout */ - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - *addr = CMD_SUSPEND; - result = BIT_TIMEOUT; - break; - } - - *addr = CMD_STATUS_READ; - result = *addr; - } while (~result & BIT_BUSY); - - /* *addr = CMD_READ_ARRAY; */ - *addr = CMD_STATUS_READ; - result = *addr; - - rc = flash_error (result); - - if (iflag) - enable_interrupts (); - -#ifdef USE_920T_MMU - if (cflag) - dcache_enable (); -#endif - *addr = CMD_READ_ARRAY; - *addr = CMD_RESUME; - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash. - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int l; - int i, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 24); - } - for (; i < 4 && cnt > 0; ++i) { - data = (data >> 8) | (*src++ << 24); - --cnt; - ++cp; - } - for (; cnt == 0 && i < 4; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 24); - } - - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = *((vu_long *) src); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 4; - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return ERR_OK; - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 24); - --cnt; - } - for (; i < 4; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 24); - } - - return write_word (info, wp, data); -} diff --git a/board/samsung/smdk2400/lowlevel_init.S b/board/samsung/smdk2400/lowlevel_init.S deleted file mode 100644 index c275c07e7c..0000000000 --- a/board/samsung/smdk2400/lowlevel_init.S +++ /dev/null @@ -1,163 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * - * Modified for the Samsung development board by - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include <config.h> -#include <version.h> - - -/* some parameters for the board */ - -/* - * - * Taken from linux/arch/arm/boot/compressed/head-s3c2400.S - * - * Copyright (C) 2001 Samsung Electronics by chc, 010406 - * - * S3C2400 specific tweaks. - * - */ - -/* memory controller */ -#define BWSCON 0x14000000 -#define BANKCON3 0x14000010 /* for cs8900, ethernet */ - -/* Bank0 */ -#define B0_Tacs 0x0 /* 0 clk */ -#define B0_Tcos 0x0 /* 0 clk */ -#define B0_Tacc 0x7 /* 14 clk */ -#define B0_Tcoh 0x0 /* 0 clk */ -#define B0_Tah 0x0 /* 0 clk */ -#define B0_Tacp 0x0 -#define B0_PMC 0x0 /* normal */ - -/* Bank1 */ -#define B1_Tacs 0x0 /* 0 clk */ -#define B1_Tcos 0x0 /* 0 clk */ -#define B1_Tacc 0x7 /* 14 clk */ -#define B1_Tcoh 0x0 /* 0 clk */ -#define B1_Tah 0x0 /* 0 clk */ -#define B1_Tacp 0x0 -#define B1_PMC 0x0 /* normal */ - -/* Bank2 */ -#define B2_Tacs 0x0 /* 0 clk */ -#define B2_Tcos 0x0 /* 0 clk */ -#define B2_Tacc 0x7 /* 14 clk */ -#define B2_Tcoh 0x0 /* 0 clk */ -#define B2_Tah 0x0 /* 0 clk */ -#define B2_Tacp 0x0 -#define B2_PMC 0x0 /* normal */ - -/* Bank3 - setup for the cs8900 */ -#define B3_Tacs 0x0 /* 0 clk */ -#define B3_Tcos 0x3 /* 4 clk */ -#define B3_Tacc 0x7 /* 14 clk */ -#define B3_Tcoh 0x1 /* 1 clk */ -#define B3_Tah 0x0 /* 0 clk */ -#define B3_Tacp 0x3 /* 6 clk */ -#define B3_PMC 0x0 /* normal */ - -/* Bank4 */ -#define B4_Tacs 0x0 /* 0 clk */ -#define B4_Tcos 0x0 /* 0 clk */ -#define B4_Tacc 0x7 /* 14 clk */ -#define B4_Tcoh 0x0 /* 0 clk */ -#define B4_Tah 0x0 /* 0 clk */ -#define B4_Tacp 0x0 -#define B4_PMC 0x0 /* normal */ - -/* Bank5 */ -#define B5_Tacs 0x0 /* 0 clk */ -#define B5_Tcos 0x0 /* 0 clk */ -#define B5_Tacc 0x7 /* 14 clk */ -#define B5_Tcoh 0x0 /* 0 clk */ -#define B5_Tah 0x0 /* 0 clk */ -#define B5_Tacp 0x0 -#define B5_PMC 0x0 /* normal */ - -/* Bank6 */ -#define B6_MT 0x3 /* SDRAM */ -#define B6_Trcd 0x1 /* 3clk */ -#define B6_SCAN 0x1 /* 9 bit */ - -/* Bank7 */ -#define B7_MT 0x3 /* SDRAM */ -#define B7_Trcd 0x1 /* 3clk */ -#define B7_SCAN 0x1 /* 9 bit */ - -/* refresh parameter */ -#define REFEN 0x1 /* enable refresh */ -#define TREFMD 0x0 /* CBR(CAS before RAS)/auto refresh */ -#define Trp 0x0 /* 2 clk */ -#define Trc 0x3 /* 7 clk */ -#define Tchr 0x2 /* 3 clk */ - -#define REFCNT 1113 /* period=15.6 us, HCLK=60Mhz, (2048+1-15.6*66) */ - - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - -.globl lowlevel_init -lowlevel_init: - /* memory control configuration */ - /* make r0 relative the current location so that it */ - /* reads SMRDATA out of FLASH rather than memory ! */ - ldr r0, =SMRDATA - ldr r1, _TEXT_BASE - sub r0, r0, r1 - ldr r1, =BWSCON /* Bus Width Status Controller */ - add r2, r0, #52 -0: - ldr r3, [r0], #4 - str r3, [r1], #4 - cmp r2, r0 - bne 0b - - /* everything is fine now */ - mov pc, lr - - .ltorg -/* the literal pools origin */ - -SMRDATA: - .word 0x2211d114 /* d->Ethernet, BUSWIDTH=32 */ - .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /* GCS0 */ - .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /* GCS1 */ - .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /* GCS2 */ - .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /* GCS3 */ - .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /* GCS4 */ - .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /* GCS5 */ - .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /* GCS6 */ - .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /* GCS7 */ - .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) - .word 0x10 /* BUSWIDTH=32, SCLK power saving mode, BANKSIZE 32M/32M */ - .word 0x30 /* MRSR6, CL=3clk */ - .word 0x30 /* MRSR7 */ diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c deleted file mode 100644 index 895bd7789a..0000000000 --- a/board/samsung/smdk2400/smdk2400.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#include <asm/arch/s3c24x0_cpu.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_MODEM_SUPPORT -static int key_pressed(void); -int mdm_init (bd_t *); -extern void disable_putc(void); -extern void enable_putc(void); -extern int hwflow_onoff(int); -extern int do_mdm_init; /* defined in common/main.c */ -#endif /* CONFIG_MODEM_SUPPORT */ - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_init (void) -{ - struct s3c24x0_clock_power * const clk_power = - s3c24x0_get_base_clock_power(); - struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - - /* memory and cpu-speed are setup before relocation */ - /* change the clock to be 50 MHz 1:1:1 */ - clk_power->mpllcon = 0x5c042; - clk_power->clkdivn = 0; - /* set up the I/O ports */ - gpio->pacon = 0x3ffff; - gpio->pbcon = 0xaaaaaaaa; - gpio->pbup = 0xffff; - gpio->pecon = 0x0; - gpio->peup = 0x0; -#ifdef CONFIG_HWFLOW - /*CTS[0] RTS[0] INPUT INPUT TXD[0] INPUT RXD[0] */ - /* 10, 10, 00, 00, 10, 00, 10 */ - gpio->pfcon = 0xa22; - /* Disable pull-up on Rx, Tx, CTS and RTS pins */ - gpio->pfup = 0x35; -#else - /*INPUT INPUT INPUT INPUT TXD[0] INPUT RXD[0] */ - /* 00, 00, 00, 00, 10, 00, 10 */ - gpio->pfcon = 0x22; - /* Disable pull-up on Rx and Tx pins */ - gpio->pfup = 0x5; -#endif /* CONFIG_HWFLOW */ - gpio->pgcon = 0x0; - gpio->pgup = 0x0; - gpio->opencr = 0x0; - - /* arch number of SAMSUNG-Board to MACH_TYPE_SMDK2400 */ - gd->bd->bi_arch_number = MACH_TYPE_SMDK2400; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x0C000100; - -#ifdef CONFIG_MODEM_SUPPORT - if (key_pressed()) { - disable_putc(); /* modem doesn't understand banner etc */ - do_mdm_init = 1; - } -#endif /* CONFIG_MODEM_SUPPORT */ - - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; -} - -#ifdef CONFIG_MODEM_SUPPORT -static int key_pressed(void) -{ - int rc; - if (1) { /* check for button push here, now just return 1 */ - rc = 1; - } - - return rc; -} -#endif /* CONFIG_MODEM_SUPPORT */ - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_CS8900 - rc = cs8900_initialize(0, CONFIG_CS8900_BASE); -#endif - return rc; -} -#endif diff --git a/board/samsung/smdk6400/smdk6400.c b/board/samsung/smdk6400/smdk6400.c index 13c7ed5189..c40d1f9b49 100644 --- a/board/samsung/smdk6400/smdk6400.c +++ b/board/samsung/smdk6400/smdk6400.c @@ -72,7 +72,6 @@ int board_init(void) /* Enable WAIT */ SROM_BW_REG |= 4 | 8 | 1; - gd->bd->bi_arch_number = MACH_TYPE; gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; return 0; diff --git a/board/samsung/smdkc100/smdkc100.c b/board/samsung/smdkc100/smdkc100.c index 1ad68b9c07..c41e610a43 100644 --- a/board/samsung/smdkc100/smdkc100.c +++ b/board/samsung/smdkc100/smdkc100.c @@ -41,7 +41,7 @@ static void smc9115_pre_init(void) (struct s5pc100_gpio *)samsung_get_base_gpio(); /* gpio configuration GPK0CON */ - gpio_cfg_pin(&gpio->k0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2)); + s5p_gpio_cfg_pin(&gpio->k0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2)); /* Ethernet needs bus width of 16 bits */ smc_bw_conf = SMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK); diff --git a/board/samsung/smdkv310/smdkv310.c b/board/samsung/smdkv310/smdkv310.c index acf9ee7b87..e0b89dd55b 100644 --- a/board/samsung/smdkv310/smdkv310.c +++ b/board/samsung/smdkv310/smdkv310.c @@ -37,7 +37,7 @@ static void smc9115_pre_init(void) u32 smc_bw_conf, smc_bc_conf; /* gpio configuration GPK0CON */ - gpio_cfg_pin(&gpio2->y0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2)); + s5p_gpio_cfg_pin(&gpio2->y0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2)); /* Ethernet needs bus width of 16 bits */ smc_bw_conf = SROMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK); @@ -116,19 +116,19 @@ int board_mmc_init(bd_t *bis) */ for (i = 0; i < 7; i++) { /* GPK2[0:6] special function 2 */ - gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2)); + s5p_gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2)); /* GPK2[0:6] drv 4x */ - gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X); + s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X); /* GPK2[0:1] pull disable */ if (i == 0 || i == 1) { - gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE); + s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE); continue; } /* GPK2[2:6] pull up */ - gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP); + s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP); } err = s5p_mmc_init(2, 4); return err; diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index b65bc6ecb7..1b27e8b428 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -160,7 +160,7 @@ int board_mmc_init(bd_t *bis) * you should set it HIGH since it removes the inverter */ /* MASSMEMORY_EN: XMDMDATA_6: GPE3[6] */ - gpio_direction_output(&gpio1->e3, 6, 0); + s5p_gpio_direction_output(&gpio1->e3, 6, 0); break; default: /* @@ -168,7 +168,7 @@ int board_mmc_init(bd_t *bis) * But set it as HIGH to ensure */ /* MASSMEMORY_EN: XMDMADDR_3: GPE1[3] */ - gpio_direction_output(&gpio1->e1, 3, 1); + s5p_gpio_direction_output(&gpio1->e1, 3, 1); break; } @@ -192,25 +192,25 @@ int board_mmc_init(bd_t *bis) if (i == 2) continue; /* GPK0[0:6] special function 2 */ - gpio_cfg_pin(&gpio2->k0, i, 0x2); + s5p_gpio_cfg_pin(&gpio2->k0, i, 0x2); /* GPK0[0:6] pull disable */ - gpio_set_pull(&gpio2->k0, i, GPIO_PULL_NONE); + s5p_gpio_set_pull(&gpio2->k0, i, GPIO_PULL_NONE); /* GPK0[0:6] drv 4x */ - gpio_set_drv(&gpio2->k0, i, GPIO_DRV_4X); + s5p_gpio_set_drv(&gpio2->k0, i, GPIO_DRV_4X); } for (i = 3; i < 7; i++) { /* GPK1[3:6] special function 3 */ - gpio_cfg_pin(&gpio2->k1, i, 0x3); + s5p_gpio_cfg_pin(&gpio2->k1, i, 0x3); /* GPK1[3:6] pull disable */ - gpio_set_pull(&gpio2->k1, i, GPIO_PULL_NONE); + s5p_gpio_set_pull(&gpio2->k1, i, GPIO_PULL_NONE); /* GPK1[3:6] drv 4x */ - gpio_set_drv(&gpio2->k1, i, GPIO_DRV_4X); + s5p_gpio_set_drv(&gpio2->k1, i, GPIO_DRV_4X); } /* T-flash detect */ - gpio_cfg_pin(&gpio2->x3, 4, 0xf); - gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP); + s5p_gpio_cfg_pin(&gpio2->x3, 4, 0xf); + s5p_gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP); /* * MMC device init @@ -223,7 +223,7 @@ int board_mmc_init(bd_t *bis) * Check the T-flash detect pin * GPX3[4] T-flash detect pin */ - if (!gpio_get_value(&gpio2->x3, 4)) { + if (!s5p_gpio_get_value(&gpio2->x3, 4)) { /* * SD card GPIO: * GPK2[0] SD_2_CLK(2) @@ -235,11 +235,11 @@ int board_mmc_init(bd_t *bis) if (i == 2) continue; /* GPK2[0:6] special function 2 */ - gpio_cfg_pin(&gpio2->k2, i, 0x2); + s5p_gpio_cfg_pin(&gpio2->k2, i, 0x2); /* GPK2[0:6] pull disable */ - gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE); + s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE); /* GPK2[0:6] drv 4x */ - gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X); + s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X); } err = s5p_mmc_init(2, 4); } diff --git a/board/sbc2410x/Makefile b/board/sbc2410x/Makefile deleted file mode 100644 index 2b3b781eea..0000000000 --- a/board/sbc2410x/Makefile +++ /dev/null @@ -1,51 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := sbc2410x.o flash.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/sbc2410x/config.mk b/board/sbc2410x/config.mk deleted file mode 100644 index bc01a2d9f2..0000000000 --- a/board/sbc2410x/config.mk +++ /dev/null @@ -1,23 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -# -# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu -# -# see http://www.samsung.com/ for more information on SAMSUNG -# - -# -# SMDK2410 has 1 bank of 64 MB DRAM -# -# 3000'0000 to 3400'0000 -# -# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 -# optionally with a ramdisk at 3080'0000 -# -# we load ourself to 33F8'0000 -# -# download area is 3300'0000 - -CONFIG_SYS_TEXT_BASE = 0x33F80000 diff --git a/board/sbc2410x/flash.c b/board/sbc2410x/flash.c deleted file mode 100644 index d209a6f9ac..0000000000 --- a/board/sbc2410x/flash.c +++ /dev/null @@ -1,433 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -ulong myflush (void); - -#define FLASH_BANK_SIZE PHYS_FLASH_SIZE -#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -#define CMD_READ_ARRAY 0x000000F0 -#define CMD_UNLOCK1 0x000000AA -#define CMD_UNLOCK2 0x00000055 -#define CMD_ERASE_SETUP 0x00000080 -#define CMD_ERASE_CONFIRM 0x00000030 -#define CMD_PROGRAM 0x000000A0 -#define CMD_UNLOCK_BYPASS 0x00000020 - -#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 1))) -#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA << 1))) - -#define BIT_ERASE_DONE 0x00000080 -#define BIT_RDY_MASK 0x00000080 -#define BIT_PROGRAM_ERROR 0x00000020 -#define BIT_TIMEOUT 0x80000000 /* our flag */ - -#define READY 1 -#define ERR 2 -#define TMO 4 - -/*----------------------------------------------------------------------- - */ - -ulong flash_init (void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - - flash_info[i].flash_id = -#if defined(CONFIG_AMD_LV400) - (AMD_MANUFACT & FLASH_VENDMASK) | - (AMD_ID_LV400B & FLASH_TYPEMASK); -#elif defined(CONFIG_AMD_LV800) - (AMD_MANUFACT & FLASH_VENDMASK) | - (AMD_ID_LV800B & FLASH_TYPEMASK); -#else -#error "Unknown flash configured" -#endif - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - if (i == 0) - flashbase = PHYS_FLASH_1; - else - panic ("configured too many flash banks!\n"); - for (j = 0; j < flash_info[i].sector_count; j++) { - if (j <= 3) { - /* 1st one is 16 KB */ - if (j == 0) { - flash_info[i].start[j] = - flashbase + 0; - } - - /* 2nd and 3rd are both 8 KB */ - if ((j == 1) || (j == 2)) { - flash_info[i].start[j] = - flashbase + 0x4000 + (j - - 1) * - 0x2000; - } - - /* 4th 32 KB */ - if (j == 3) { - flash_info[i].start[j] = - flashbase + 0x8000; - } - } else { - flash_info[i].start[j] = - flashbase + (j - 3) * MAIN_SECT_SIZE; - } - } - size += flash_info[i].size; - } - - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (AMD_MANUFACT & FLASH_VENDMASK): - printf ("AMD: "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (AMD_ID_LV400B & FLASH_TYPEMASK): - printf ("1x Amd29LV400BB (4Mbit)\n"); - break; - case (AMD_ID_LV800B & FLASH_TYPEMASK): - printf ("1x Amd29LV800BB (8Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - goto Done; - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - - Done:; -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - ushort result; - int iflag, cflag, prot, sect; - int rc = ERR_OK; - int chip; - ulong start; - - /* first look for protection bits */ - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != - (AMD_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - if (info->protect[sect] == 0) { /* not protected */ - vu_short *addr = (vu_short *) (info->start[sect]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - *addr = CMD_ERASE_CONFIRM; - - /* wait until flash is ready */ - chip = 0; - - do { - result = *addr; - - /* check timeout */ - if (get_timer(start) > - CONFIG_SYS_FLASH_ERASE_TOUT) { - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - chip = TMO; - break; - } - - if (!chip - && (result & 0xFFFF) & BIT_ERASE_DONE) - chip = READY; - - if (!chip - && (result & 0xFFFF) & BIT_PROGRAM_ERROR) - chip = ERR; - - } while (!chip); - - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - - if (chip == ERR) { - rc = ERR_PROG_ERROR; - goto outahere; - } - if (chip == TMO) { - rc = ERR_TIMOUT; - goto outahere; - } - - printf ("ok.\n"); - } else { /* it was protected */ - - printf ("protected!\n"); - } - } - - if (ctrlc ()) - printf ("User Interrupt!\n"); - - outahere: - /* allow flash to settle - wait 10 ms */ - udelay_masked (10000); - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash - */ - -static int write_hword (flash_info_t * info, ulong dest, ushort data) -{ - vu_short *addr = (vu_short *) dest; - ushort result; - int rc = ERR_OK; - int cflag, iflag; - int chip; - ulong start; - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS; - *addr = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - get_timer(start); - - /* wait until flash is ready */ - chip = 0; - do { - result = *addr; - - /* check timeout */ - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - chip = ERR | TMO; - break; - } - if (!chip && ((result & 0x80) == (data & 0x80))) - chip = READY; - - if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) { - result = *addr; - - if ((result & 0x80) == (data & 0x80)) - chip = READY; - else - chip = ERR; - } - - } while (!chip); - - *addr = CMD_READ_ARRAY; - - if (chip == ERR || *addr != data) - rc = ERR_PROG_ERROR; - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash. - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - int l; - int i, rc; - ushort data; - - wp = (addr & ~1); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - for (; i < 2 && cnt > 0; ++i) { - data = (data >> 8) | (*src++ << 8); - --cnt; - ++cp; - } - for (; cnt == 0 && i < 2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - - if ((rc = write_hword (info, wp, data)) != 0) { - return (rc); - } - wp += 2; - } - - /* - * handle word aligned part - */ - while (cnt >= 2) { - data = *((vu_short *) src); - if ((rc = write_hword (info, wp, data)) != 0) { - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 0) { - return ERR_OK; - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 8); - --cnt; - } - for (; i < 2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *) cp << 8); - } - - return write_hword (info, wp, data); -} diff --git a/board/sbc2410x/lowlevel_init.S b/board/sbc2410x/lowlevel_init.S deleted file mode 100644 index 3de91661d4..0000000000 --- a/board/sbc2410x/lowlevel_init.S +++ /dev/null @@ -1,163 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * - * Modified for the Samsung SMDK2410 by - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> - * - * Modified for the friendly-arm SBC-2410X by - * (C) Copyright 2005 - * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> - -/* - * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S - * - * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com> - */ - -#define BWSCON 0x48000000 - -/* BWSCON */ -#define DW8 (0x0) -#define DW16 (0x1) -#define DW32 (0x2) -#define WAIT (0x1<<2) -#define UBLB (0x1<<3) - -#define B1_BWSCON (DW16) -#define B2_BWSCON (DW16) -#define B3_BWSCON (DW16 + WAIT + UBLB) -#define B4_BWSCON (DW16) -#define B5_BWSCON (DW16) -#define B6_BWSCON (DW32) -#define B7_BWSCON (DW32) - -#define B0_Tacs 0x0 -#define B0_Tcos 0x0 -#define B0_Tacc 0x7 -#define B0_Tcoh 0x0 -#define B0_Tah 0x0 -#define B0_Tacp 0x0 -#define B0_PMC 0x0 - -#define B1_Tacs 0x0 -#define B1_Tcos 0x0 -#define B1_Tacc 0x7 -#define B1_Tcoh 0x0 -#define B1_Tah 0x0 -#define B1_Tacp 0x0 -#define B1_PMC 0x0 - -#define B2_Tacs 0x0 -#define B2_Tcos 0x0 -#define B2_Tacc 0x7 -#define B2_Tcoh 0x0 -#define B2_Tah 0x0 -#define B2_Tacp 0x0 -#define B2_PMC 0x0 - -#define B3_Tacs 0xc -#define B3_Tcos 0x7 -#define B3_Tacc 0xf -#define B3_Tcoh 0x1 -#define B3_Tah 0x0 -#define B3_Tacp 0x0 -#define B3_PMC 0x0 - -#define B4_Tacs 0x0 -#define B4_Tcos 0x0 -#define B4_Tacc 0x7 -#define B4_Tcoh 0x0 -#define B4_Tah 0x0 -#define B4_Tacp 0x0 -#define B4_PMC 0x0 - -#define B5_Tacs 0xc -#define B5_Tcos 0x7 -#define B5_Tacc 0xf -#define B5_Tcoh 0x1 -#define B5_Tah 0x0 -#define B5_Tacp 0x0 -#define B5_PMC 0x0 - -#define B6_MT 0x3 /* SDRAM */ -#define B6_Trcd 0x1 -#define B6_SCAN 0x1 /* 9bit */ - -#define B7_MT 0x3 /* SDRAM */ -#define B7_Trcd 0x1 /* 3clk */ -#define B7_SCAN 0x1 /* 9bit */ - -/* REFRESH parameter */ -#define REFEN 0x1 /* Refresh enable */ -#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ -#define Trp 0x0 /* 2clk */ -#define Trc 0x3 /* 7clk */ -#define Tchr 0x2 /* 3clk */ -#define REFCNT 0x0459 -/**************************************/ - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - -.globl lowlevel_init -lowlevel_init: - /* memory control configuration */ - /* make r0 relative the current location so that it */ - /* reads SMRDATA out of FLASH rather than memory ! */ - ldr r0, =SMRDATA - ldr r1, _TEXT_BASE - sub r0, r0, r1 - ldr r1, =BWSCON /* Bus Width Status Controller */ - add r2, r0, #13*4 -0: - ldr r3, [r0], #4 - str r3, [r1], #4 - cmp r2, r0 - bne 0b - - /* everything is fine now */ - mov pc, lr - - .ltorg -/* the literal pools origin */ - -SMRDATA: - .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) - .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) - .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) - .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) - .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) - .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) - .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) - .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) - .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) - .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) - .word 0xb2 - .word 0x30 - .word 0x30 diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c deleted file mode 100644 index c82382dc82..0000000000 --- a/board/sbc2410x/sbc2410x.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> - * - * (C) Copyright 2005 - * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#include <asm/arch/s3c24x0_cpu.h> - -#if defined(CONFIG_CMD_NAND) -#include <linux/mtd/nand.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -#define FCLK_SPEED 1 - -#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */ -#define M_MDIV 0xC3 -#define M_PDIV 0x4 -#define M_SDIV 0x1 -#elif FCLK_SPEED==1 /* Fout = 202.8MHz */ -#define M_MDIV 0x5c -#define M_PDIV 0x4 -#define M_SDIV 0x0 -#endif - -#define USB_CLOCK 1 - -#if USB_CLOCK==0 -#define U_M_MDIV 0xA1 -#define U_M_PDIV 0x3 -#define U_M_SDIV 0x1 -#elif USB_CLOCK==1 -#define U_M_MDIV 0x48 -#define U_M_PDIV 0x3 -#define U_M_SDIV 0x2 -#endif - -static inline void delay (unsigned long loops) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_init (void) -{ - struct s3c24x0_clock_power * const clk_power = - s3c24x0_get_base_clock_power(); - struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - - /* to reduce PLL lock time, adjust the LOCKTIME register */ - clk_power->locktime = 0xFFFFFF; - - /* configure MPLL */ - clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); - - /* some delay between MPLL and UPLL */ - delay (4000); - - /* configure UPLL */ - clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); - - /* some delay between MPLL and UPLL */ - delay (8000); - - /* set up the I/O ports */ - gpio->gpacon = 0x007FFFFF; - gpio->gpbcon = 0x00044556; - gpio->gpbup = 0x000007FF; - gpio->gpccon = 0xAAAAAAAA; - gpio->gpcup = 0x0000FFFF; - gpio->gpdcon = 0xAAAAAAAA; - gpio->gpdup = 0x0000FFFF; - gpio->gpecon = 0xAAAAAAAA; - gpio->gpeup = 0x0000FFFF; - gpio->gpfcon = 0x000055AA; - gpio->gpfup = 0x000000FF; - gpio->gpgcon = 0xFF95FF3A; - gpio->gpgup = 0x0000FFFF; - gpio->gphcon = 0x0016FAAA; - gpio->gphup = 0x000007FF; - - gpio->extint0 = 0x22222222; - gpio->extint1 = 0x22222222; - gpio->extint2 = 0x22222222; - - /* arch number of SMDK2410-Board */ - gd->bd->bi_arch_number = MACH_TYPE_SMDK2410; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x30000100; - - icache_enable(); - dcache_enable(); - - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; -} - -#if defined(CONFIG_CMD_NAND) -extern ulong nand_probe(ulong physadr); - -static inline void NF_Reset(void) -{ - int i; - - NF_SetCE(NFCE_LOW); - NF_Cmd(0xFF); /* reset command */ - for(i = 0; i < 10; i++); /* tWB = 100ns. */ - NF_WaitRB(); /* wait 200~500us; */ - NF_SetCE(NFCE_HIGH); -} - -static inline void NF_Init(void) -{ -#if 1 -#define TACLS 0 -#define TWRPH0 3 -#define TWRPH1 0 -#else -#define TACLS 0 -#define TWRPH0 4 -#define TWRPH1 2 -#endif - - NF_Conf((1<<15)|(0<<14)|(0<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0)); - /*nand->NFCONF = (1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0); */ - /* 1 1 1 1, 1 xxx, r xxx, r xxx */ - /* En 512B 4step ECCR nFCE=H tACLS tWRPH0 tWRPH1 */ - - NF_Reset(); -} - -void nand_init(void) -{ - struct s3c2410_nand * const nand = s3c2410_get_base_nand(); - - NF_Init(); -#ifdef DEBUG - printf("NAND flash probing at 0x%.8lX\n", (ulong)nand); -#endif - printf ("%4lu MB\n", nand_probe((ulong)nand) >> 20); -} -#endif - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_CS8900 - rc = cs8900_initialize(0, CONFIG_CS8900_BASE); -#endif - return rc; -} -#endif diff --git a/board/scb9328/scb9328.c b/board/scb9328/scb9328.c index 2e31e8c7b3..076c046ced 100644 --- a/board/scb9328/scb9328.c +++ b/board/scb9328/scb9328.c @@ -40,7 +40,7 @@ int board_init (void) int dram_init (void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)SCB9328_SDRAM_1, + gd->ram_size = get_ram_size((void *)SCB9328_SDRAM_1, SCB9328_SDRAM_1_SIZE); return 0; diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c index f0550389eb..893adc6bd5 100644 --- a/board/syteco/zmx25/zmx25.c +++ b/board/syteco/zmx25/zmx25.c @@ -29,7 +29,7 @@ * */ #include <common.h> -#include <mxc_gpio.h> +#include <asm/gpio.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> #include <asm/arch/imx25-pinmux.h> @@ -56,8 +56,7 @@ int board_init() /* Setup of core volatage selection pin to run at 1.4V */ writel(gpio_mux_mode5, &muxctl->pad_ext_armclk); /* VCORE GPIO3[15] */ - mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(3, 15), MXC_GPIO_DIRECTION_OUT); - mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(3, 15), 1); + gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 15), 1); /* Setup of input daisy chains for SD card pins*/ writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_cmd); @@ -69,11 +68,10 @@ int board_init() /* Setup of digital output for USB power and OC */ writel(gpio_mux_mode5, &muxctl->pad_csi_d3); /* USB Power GPIO1[28] */ - mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 28), MXC_GPIO_DIRECTION_OUT); - mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 28), 1); + gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 28), 1); writel(gpio_mux_mode5, &muxctl->pad_csi_d2); /* USB OC GPIO1[27] */ - mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 18), MXC_GPIO_DIRECTION_IN); + gpio_direction_input(MXC_GPIO_PORT_TO_NUM(1, 18)); /* Setup of digital output control pins */ writel(gpio_mux_mode5, &muxctl->pad_csi_d8); /* Ouput 1 Ctrl GPIO1[7] */ @@ -85,25 +83,21 @@ int board_init() writel(0, &padctl->pad_csi_d5); /* Ouput 2 Stat pull up off */ /* Switch both output drivers off */ - mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 7), 0); - mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 7), MXC_GPIO_DIRECTION_OUT); - mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 6), 0); - mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 6), MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 7), 0); + gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 6), 0); /* Setup of key input pin GPIO2[29]*/ writel(gpio_mux_mode5 | MX25_PIN_MUX_SION, &muxctl->pad_kpp_row0); writel(0, &padctl->pad_kpp_row0); /* Key pull up off */ - mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(2, 29), MXC_GPIO_DIRECTION_IN); + gpio_direction_input(MXC_GPIO_PORT_TO_NUM(2, 29)); /* Setup of status LED outputs */ writel(gpio_mux_mode5, &muxctl->pad_csi_d9); /* GPIO4[21] */ writel(gpio_mux_mode5, &muxctl->pad_csi_d4); /* GPIO1[29] */ /* Switch both LEDs off */ - mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(4, 21), 0); - mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(4, 21), MXC_GPIO_DIRECTION_OUT); - mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 29), 0); - mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 29), MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(MXC_GPIO_PORT_TO_NUM(4, 21), 0); + gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 29), 0); /* Setup of CAN1 and CAN2 signals */ writel(gpio_mux_mode6, &muxctl->pad_gpio_a); /* CAN1 TX */ @@ -158,13 +152,12 @@ int board_late_init(void) writel(gpio_mux_mode2, &muxctl->pad_uart2_cts); /* assert PHY reset (low) */ - mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(3, 16), 0); - mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(3, 16), MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 16), 0); udelay(5000); /* deassert PHY reset */ - mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(3, 16), 1); + gpio_set_value(MXC_GPIO_PORT_TO_NUM(3, 16), 1); udelay(5000); #endif @@ -172,12 +165,12 @@ int board_late_init(void) e = getenv("gs_base_board"); if (e != NULL) { if (strcmp(e, "G283") == 0) { - int key = mxc_gpio_get(MXC_GPIO_PORT_TO_NUM(2, 29)); + int key = gpio_get_value(MXC_GPIO_PORT_TO_NUM(2, 29)); if (key) { /* Switch on both LEDs to inidcate boot mode */ - mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 29), 0); - mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(4, 21), 0); + gpio_set_value(MXC_GPIO_PORT_TO_NUM(1, 29), 0); + gpio_set_value(MXC_GPIO_PORT_TO_NUM(4, 21), 0); setenv("preboot", "run gs_slow_boot"); } else diff --git a/board/ti/am3517crane/am3517crane.c b/board/ti/am3517crane/am3517crane.c index d007044b2d..cd5683d9be 100644 --- a/board/ti/am3517crane/am3517crane.c +++ b/board/ti/am3517crane/am3517crane.c @@ -24,6 +24,7 @@ #include <common.h> #include <asm/io.h> +#include <asm/arch/mmc_host_def.h> #include <asm/arch/mem.h> #include <asm/arch/mux.h> #include <asm/arch/sys_proto.h> @@ -73,3 +74,11 @@ void set_muxconf_regs(void) { MUX_AM3517CRANE(); } + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0); + return 0; +} +#endif diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index ab50514f25..e07f1b8f82 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -50,6 +50,7 @@ extern struct ehci_hccr *hccr; extern volatile struct ehci_hcor *hcor; #endif #include "beagle.h" +#include <command.h> #define pr_debug(fmt, args...) debug(fmt, ##args) @@ -164,6 +165,28 @@ unsigned int get_expansion_id(void) } /* + * Configure DSS to display background color on DVID + * Configure VENC to display color bar on S-Video + */ +void beagle_display_init(void) +{ + omap3_dss_venc_config(&venc_config_std_tv, VENC_HEIGHT, VENC_WIDTH); + switch (get_board_revision()) { + case REVISION_AXBX: + case REVISION_CX: + case REVISION_C4: + omap3_dss_panel_config(&dvid_cfg); + break; + case REVISION_XM_A: + case REVISION_XM_B: + case REVISION_XM_C: + default: + omap3_dss_panel_config(&dvid_cfg_xm); + break; + } +} + +/* * Routine: misc_init_r * Description: Configure board specific parts */ @@ -216,6 +239,16 @@ int misc_init_r(void) TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, TWL4030_PM_RECEIVER_DEV_GRP_P1); break; + case REVISION_XM_C: + printf("Beagle xM Rev C\n"); + setenv("beaglerev", "xMC"); + MUX_BEAGLE_XM(); + /* Set VAUX2 to 1.8V for EHCI PHY */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, + TWL4030_PM_RECEIVER_VAUX2_VSEL_18, + TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); + break; default: printf("Beagle unknown 0x%02x\n", get_board_revision()); MUX_BEAGLE_XM(); @@ -299,20 +332,30 @@ int misc_init_r(void) setenv(expansion_config.env_var, expansion_config.env_setting); twl4030_power_init(); - twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON); - - /* Configure GPIOs to output */ - writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe); - writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | - GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe); + switch (get_board_revision()) { + case REVISION_XM_A: + case REVISION_XM_B: + twl4030_led_init(TWL4030_LED_LEDEN_LEDBON); + break; + default: + twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON); + break; + } - /* Set GPIOs */ + /* Set GPIO states before they are made outputs */ writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1, &gpio6_base->setdataout); writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout); + /* Configure GPIOs to output */ + writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe); + writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | + GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe); + dieid_num_r(); + beagle_display_init(); + omap3_dss_enable(); return 0; } @@ -346,6 +389,12 @@ int ehci_hcd_stop(void) pr_debug("Resetting OMAP3 EHCI\n"); omap_set_gpio_dataout(GPIO_PHY_RESET, 0); writel(OMAP_UHH_SYSCONFIG_SOFTRESET, OMAP3_UHH_BASE + OMAP_UHH_SYSCONFIG); + /* disable USB clocks */ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + sr32(&prcm_base->iclken_usbhost, 0, 1, 0); + sr32(&prcm_base->fclken_usbhost, 0, 2, 0); + sr32(&prcm_base->iclken3_core, 2, 1, 0); + sr32(&prcm_base->fclken3_core, 2, 1, 0); return 0; } @@ -430,3 +479,58 @@ int ehci_hcd_init(void) } #endif /* CONFIG_USB_EHCI */ + +/* + * This command returns the status of the user button on beagle xM + * Input - none + * Returns - 1 if button is held down + * 0 if button is not held down + */ +int do_userbutton (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int button = 0; + int gpio; + + /* + * pass address parameter as argv[0] (aka command name), + * and all remaining args + */ + switch (get_board_revision()) { + case REVISION_AXBX: + case REVISION_CX: + case REVISION_C4: + gpio = 7; + break; + case REVISION_XM_A: + case REVISION_XM_B: + case REVISION_XM_C: + default: + gpio = 4; + break; + } + omap_request_gpio(gpio); + omap_set_gpio_direction(gpio, 1); + printf("The user button is currently "); + if(omap_get_gpio_datain(gpio)) + { + button = 1; + printf("PRESSED.\n"); + } + else + { + button = 0; + printf("NOT pressed.\n"); + } + + omap_free_gpio(gpio); + + return !button; +} + +/* -------------------------------------------------------------------- */ + +U_BOOT_CMD( + userbutton, CONFIG_SYS_MAXARGS, 1, do_userbutton, + "Return the status of the BeagleBoard USER button", + "" +); diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h index a7401b1e7c..18bfaa8dec 100644 --- a/board/ti/beagle/beagle.h +++ b/board/ti/beagle/beagle.h @@ -23,6 +23,8 @@ #ifndef _BEAGLE_H_ #define _BEAGLE_H_ +#include <asm/arch/dss.h> + const omap3_sysinfo sysinfo = { DDR_STACKED, "OMAP3 Beagle board", @@ -39,6 +41,7 @@ const omap3_sysinfo sysinfo = { #define REVISION_C4 0x5 #define REVISION_XM_A 0x0 #define REVISION_XM_B 0x1 +#define REVISION_XM_C 0x2 /* * IEN - Input Enable @@ -471,4 +474,88 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | EN | M4)) /*GPIO_138 BT_EN*/\ MUX_VAL(CP(MMC2_DAT7), (IDIS | PTU | EN | M4)) /*GPIO_139 WLAN_EN*/ +/* + * Display Configuration + */ + +#define DVI_BEAGLE_ORANGE_COL 0x00FF8000 +#define VENC_HEIGHT 0x00ef +#define VENC_WIDTH 0x027f + +/* + * Configure VENC in DSS for Beagle to generate Color Bar + * + * Kindly refer to OMAP TRM for definition of these values. + */ +static const struct venc_regs venc_config_std_tv = { + .status = 0x0000001B, + .f_control = 0x00000040, + .vidout_ctrl = 0x00000000, + .sync_ctrl = 0x00008000, + .llen = 0x00008359, + .flens = 0x0000020C, + .hfltr_ctrl = 0x00000000, + .cc_carr_wss_carr = 0x043F2631, + .c_phase = 0x00000024, + .gain_u = 0x00000130, + .gain_v = 0x00000198, + .gain_y = 0x000001C0, + .black_level = 0x0000006A, + .blank_level = 0x0000005C, + .x_color = 0x00000000, + .m_control = 0x00000001, + .bstamp_wss_data = 0x0000003F, + .s_carr = 0x21F07C1F, + .line21 = 0x00000000, + .ln_sel = 0x00000015, + .l21__wc_ctl = 0x00001400, + .htrigger_vtrigger = 0x00000000, + .savid__eavid = 0x069300F4, + .flen__fal = 0x0016020C, + .lal__phase_reset = 0x00060107, + .hs_int_start_stop_x = 0x008D034E, + .hs_ext_start_stop_x = 0x000F0359, + .vs_int_start_x = 0x01A00000, + .vs_int_stop_x__vs_int_start_y = 0x020501A0, + .vs_int_stop_y__vs_ext_start_x = 0x01AC0024, + .vs_ext_stop_x__vs_ext_start_y = 0x020D01AC, + .vs_ext_stop_y = 0x00000006, + .avid_start_stop_x = 0x03480079, + .avid_start_stop_y = 0x02040024, + .fid_int_start_x__fid_int_start_y = 0x0001008A, + .fid_int_offset_y__fid_ext_start_x = 0x01AC0106, + .fid_ext_start_y__fid_ext_offset_y = 0x01060006, + .tvdetgp_int_start_stop_x = 0x00140001, + .tvdetgp_int_start_stop_y = 0x00010001, + .gen_ctrl = 0x00FF0000, + .output_control = 0x0000000D, + .dac_b__dac_c = 0x00000000 +}; + +/* + * Configure Timings for DVI D + */ +static const struct panel_config dvid_cfg = { + .timing_h = 0x0ff03f31, /* Horizantal timing */ + .timing_v = 0x01400504, /* Vertical timing */ + .pol_freq = 0x00007028, /* Pol Freq */ + .divisor = 0x00010006, /* 72Mhz Pixel Clock */ + .lcd_size = 0x02ff03ff, /* 1024x768 */ + .panel_type = 0x01, /* TFT */ + .data_lines = 0x03, /* 24 Bit RGB */ + .load_mode = 0x02, /* Frame Mode */ + .panel_color = DVI_BEAGLE_ORANGE_COL /* ORANGE */ +}; + +static const struct panel_config dvid_cfg_xm = { + .timing_h = 0x1a4024c9, /* Horizantal timing */ + .timing_v = 0x02c00509, /* Vertical timing */ + .pol_freq = 0x00007028, /* Pol Freq */ + .divisor = 0x00010001, /* 96MHz Pixel Clock */ + .lcd_size = 0x02ff03ff, /* 1024x768 */ + .panel_type = 0x01, /* TFT */ + .data_lines = 0x03, /* 24 Bit RGB */ + .load_mode = 0x02, /* Frame Mode */ + .panel_color = DVI_BEAGLE_ORANGE_COL /* ORANGE */ +}; #endif diff --git a/board/ti/beagle/led.c b/board/ti/beagle/led.c index 08f95a0a16..f08c08ad88 100644 --- a/board/ti/beagle/led.c +++ b/board/ti/beagle/led.c @@ -24,11 +24,9 @@ #include <asm/arch/sys_proto.h> #include <asm/arch/gpio.h> -static unsigned int saved_state[2] = {STATUS_LED_OFF, STATUS_LED_OFF}; - /* GPIO pins for the LEDs */ -#define BEAGLE_LED_USR0 149 -#define BEAGLE_LED_USR1 150 +#define BEAGLE_LED_USR0 150 +#define BEAGLE_LED_USR1 149 #ifdef STATUS_LED_GREEN void green_LED_off (void) @@ -49,22 +47,22 @@ void __led_init (led_id_t mask, int state) void __led_toggle (led_id_t mask) { + int state, toggle_gpio = 0; #ifdef STATUS_LED_BIT - if (STATUS_LED_BIT & mask) { - if (STATUS_LED_ON == saved_state[0]) - __led_set(STATUS_LED_BIT, 0); - else - __led_set(STATUS_LED_BIT, 1); - } + if (!toggle_gpio && STATUS_LED_BIT & mask) + toggle_gpio = BEAGLE_LED_USR0; #endif #ifdef STATUS_LED_BIT1 - if (STATUS_LED_BIT1 & mask) { - if (STATUS_LED_ON == saved_state[1]) - __led_set(STATUS_LED_BIT1, 0); - else - __led_set(STATUS_LED_BIT1, 1); - } + if (!toggle_gpio && STATUS_LED_BIT1 & mask) + toggle_gpio = BEAGLE_LED_USR1; #endif + if (toggle_gpio) { + if (!omap_request_gpio(toggle_gpio)) { + omap_set_gpio_direction(toggle_gpio, 0); + state = omap_get_gpio_dataout(toggle_gpio); + omap_set_gpio_dataout(toggle_gpio, !state); + } + } } void __led_set (led_id_t mask, int state) @@ -75,7 +73,6 @@ void __led_set (led_id_t mask, int state) omap_set_gpio_direction(BEAGLE_LED_USR0, 0); omap_set_gpio_dataout(BEAGLE_LED_USR0, state); } - saved_state[0] = state; } #endif #ifdef STATUS_LED_BIT1 @@ -84,7 +81,6 @@ void __led_set (led_id_t mask, int state) omap_set_gpio_direction(BEAGLE_LED_USR1, 0); omap_set_gpio_dataout(BEAGLE_LED_USR1, state); } - saved_state[1] = state; } #endif } diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c index 30c1c570f1..e8360df960 100644 --- a/board/ti/evm/evm.c +++ b/board/ti/evm/evm.c @@ -33,6 +33,7 @@ #include <asm/arch/mem.h> #include <asm/arch/mux.h> #include <asm/arch/sys_proto.h> +#include <asm/arch/mmc_host_def.h> #include <asm/arch/gpio.h> #include <i2c.h> #include <asm/mach-types.h> @@ -221,3 +222,11 @@ int board_eth_init(bd_t *bis) return rc; } #endif /* CONFIG_CMD_NET */ + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0); + return 0; +} +#endif diff --git a/board/ti/omap1610inn/omap1610innovator.c b/board/ti/omap1610inn/omap1610innovator.c index 44818bbdae..16e823766a 100644 --- a/board/ti/omap1610inn/omap1610innovator.c +++ b/board/ti/omap1610inn/omap1610innovator.c @@ -63,13 +63,6 @@ static inline void delay (unsigned long loops) int board_init (void) { - if (machine_is_omap_h2()) - gd->bd->bi_arch_number = MACH_TYPE_OMAP_H2; - else if (machine_is_omap_innovator()) - gd->bd->bi_arch_number = MACH_TYPE_OMAP_INNOVATOR; - else - gd->bd->bi_arch_number = MACH_TYPE_OMAP_GENERIC; - /* adress of boot parameters */ gd->bd->bi_boot_params = 0x10000100; diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c index 72f0984d67..d73f501819 100644 --- a/board/ti/sdp3430/sdp.c +++ b/board/ti/sdp3430/sdp.c @@ -25,6 +25,7 @@ #include <netdev.h> #include <twl4030.h> #include <asm/io.h> +#include <asm/arch/mmc_host_def.h> #include <asm/arch/mux.h> #include <asm/arch/mem.h> #include <asm/arch/sys_proto.h> @@ -204,3 +205,11 @@ void set_muxconf_regs(void) /* platform specific muxes */ MUX_SDP3430(); } + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0); + return 0; +} +#endif diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c index 95afaaaaa4..533af5a60a 100644 --- a/board/timll/devkit8000/devkit8000.c +++ b/board/timll/devkit8000/devkit8000.c @@ -35,6 +35,7 @@ #include <common.h> #include <twl4030.h> #include <asm/io.h> +#include <asm/arch/mmc_host_def.h> #include <asm/arch/mux.h> #include <asm/arch/sys_proto.h> #include <asm/arch/mem.h> @@ -119,6 +120,14 @@ void set_muxconf_regs(void) MUX_DEVKIT8000(); } +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0); + return 0; +} +#endif + #ifdef CONFIG_DRIVER_DM9000 /* * Routine: board_eth_init diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index 565c4d05ba..17a25587d6 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -29,7 +29,7 @@ #include <asm/arch/mx5x_pins.h> #include <asm/arch/crm_regs.h> #include <asm/arch/iomux.h> -#include <mxc_gpio.h> +#include <asm/gpio.h> #include <asm/arch/sys_proto.h> #include <asm/errno.h> #include <i2c.h> @@ -69,9 +69,9 @@ void hw_watchdog_reset(void) int val; /* toggle watchdog trigger pin */ - val = mxc_gpio_get(66); + val = gpio_get_value(66); val = val ? 0 : 1; - mxc_gpio_set(66, val); + gpio_set_value(66, val); } #endif @@ -233,30 +233,22 @@ static void reset_peripherals(int reset) if (reset) { /* reset_n is on NANDF_D15 */ - mxc_gpio_set(89, 0); - mxc_gpio_direction(89, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(89, 0); #ifdef CONFIG_VISION2_HW_1_0 /* * set FEC Configuration lines * set levels of FEC config lines */ - mxc_gpio_set(75, 0); - mxc_gpio_set(74, 1); - mxc_gpio_set(95, 1); - mxc_gpio_direction(75, MXC_GPIO_DIRECTION_OUT); - mxc_gpio_direction(74, MXC_GPIO_DIRECTION_OUT); - mxc_gpio_direction(95, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(75, 0); + gpio_direction_output(74, 1); + gpio_direction_output(95, 1); /* set direction of FEC config lines */ - mxc_gpio_set(59, 0); - mxc_gpio_set(60, 0); - mxc_gpio_set(61, 0); - mxc_gpio_set(55, 1); - mxc_gpio_direction(59, MXC_GPIO_DIRECTION_OUT); - mxc_gpio_direction(60, MXC_GPIO_DIRECTION_OUT); - mxc_gpio_direction(61, MXC_GPIO_DIRECTION_OUT); - mxc_gpio_direction(55, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(59, 0); + gpio_direction_output(60, 0); + gpio_direction_output(61, 0); + gpio_direction_output(55, 1); /* FEC_RXD1 - sel GPIO (2-23) for configuration -> 1 */ mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT1); @@ -283,7 +275,7 @@ static void reset_peripherals(int reset) PAD_CTL_DRV_VOT_HIGH | PAD_CTL_DRV_MAX); } else { /* set FEC Control lines */ - mxc_gpio_direction(89, MXC_GPIO_DIRECTION_IN); + gpio_direction_input(89); udelay(500); #ifdef CONFIG_VISION2_HW_1_0 @@ -438,31 +430,23 @@ static void setup_gpios(void) * Set GPIO1_4 to high and output; it is used to reset * the system on reboot */ - mxc_gpio_set(4, 1); - mxc_gpio_direction(4, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(4, 1); - mxc_gpio_set(7, 0); - mxc_gpio_direction(7, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(7, 0); for (i = 65; i < 71; i++) { - mxc_gpio_set(i, 0); - mxc_gpio_direction(i, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(i, 0); } - mxc_gpio_set(94, 0); - mxc_gpio_direction(94, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(94, 0); /* Set POWER_OFF high */ - mxc_gpio_set(91, 1); - mxc_gpio_direction(91, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(91, 1); - mxc_gpio_set(90, 0); - mxc_gpio_direction(90, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(90, 0); - mxc_gpio_set(122, 0); - mxc_gpio_direction(122, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(122, 0); - mxc_gpio_set(121, 1); - mxc_gpio_direction(121, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(121, 1); WATCHDOG_RESET(); } @@ -551,7 +535,7 @@ int get_mmc_getcd(u8 *cd, struct mmc *mmc) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - *cd = mxc_gpio_get(0); + *cd = gpio_get_value(0); else *cd = 0; @@ -623,8 +607,7 @@ int board_early_init_f(void) init_drive_strength(); /* Setup debug led */ - mxc_gpio_set(6, 0); - mxc_gpio_direction(6, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(6, 0); mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0); mxc_iomux_set_pad(MX51_PIN_GPIO1_6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); @@ -644,12 +627,12 @@ int board_early_init_f(void) static void backlight(int on) { if (on) { - mxc_gpio_set(65, 1); + gpio_set_value(65, 1); udelay(10000); - mxc_gpio_set(68, 1); + gpio_set_value(68, 1); } else { - mxc_gpio_set(65, 0); - mxc_gpio_set(68, 0); + gpio_set_value(65, 0); + gpio_set_value(68, 0); } } @@ -660,7 +643,7 @@ void lcd_enable(void) mxc_request_iomux(MX51_PIN_DI1_PIN2, IOMUX_CONFIG_ALT0); mxc_request_iomux(MX51_PIN_DI1_PIN3, IOMUX_CONFIG_ALT0); - mxc_gpio_set(2, 1); + gpio_set_value(2, 1); mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0); ret = mx51_fb_init(&nec_nl6448bc26_09c); diff --git a/board/voiceblue/Makefile b/board/voiceblue/Makefile deleted file mode 100644 index e16b195c3c..0000000000 --- a/board/voiceblue/Makefile +++ /dev/null @@ -1,74 +0,0 @@ -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de -# -# (C) Copyright 2005 -# Ladislav Michl, 2N Telekomunikace, michl@2n.cz -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License version 2 as -# published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := voiceblue.o -SOBJS := setup.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -LOAD_ADDR = 0x10400000 - -######################################################################### - -all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin - -$(LIB): $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $^) - -$(obj)eeprom_start.o: - echo "b eeprom" | $(CC) $(AFLAGS) -c -x assembler -o $@ - - -$(obj)eeprom: $(obj)eeprom_start.o $(obj)eeprom.o - $(LD) -Ttext $(LOAD_ADDR) -e eeprom -o $@ $^ \ - -L$(obj)../../examples/standalone -lstubs \ - $(PLATFORM_LIBS) - -$(obj)eeprom.srec: $(obj)eeprom - $(OBJCOPY) -S -O srec $(<:.o=) $@ - -$(obj)eeprom.bin: $(obj)eeprom - $(OBJCOPY) -S -O binary $< $@ - -clean: - rm -f $(SOBJS) $(OBJS) $(obj)eeprom \ - $(obj)eeprom.srec $(obj)eeprom.bin \ - $(obj)eeprom.o $(obj)eeprom_start.o - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/voiceblue/config.mk b/board/voiceblue/config.mk deleted file mode 100644 index 412b57d27e..0000000000 --- a/board/voiceblue/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x13FD0000 diff --git a/board/voiceblue/eeprom.c b/board/voiceblue/eeprom.c deleted file mode 100644 index aa6baca645..0000000000 --- a/board/voiceblue/eeprom.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * (C) Copyright 2005 - * Ladislav Michl, 2N Telekomunikace, michl@2n.cz - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Some code shamelessly stolen back from Robin Getz. - */ - -#include <common.h> -#include <exports.h> -#include <timestamp.h> -#include <net.h> -#include "../drivers/net/smc91111.h" - -static struct eth_device dev = { - .iobase = CONFIG_SMC91111_BASE -}; - -static u16 read_eeprom_reg(u16 reg) -{ - int timeout; - - SMC_SELECT_BANK(&dev, 2); - SMC_outw(&dev, reg, PTR_REG); - - SMC_SELECT_BANK(&dev, 1); - SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT | - CTL_RELOAD, CTL_REG); - - timeout = 100; - - while ((SMC_inw(&dev, CTL_REG) & CTL_RELOAD) && --timeout) - udelay(100); - if (timeout == 0) { - printf("Timeout reading register %02x\n", reg); - return 0; - } - - return SMC_inw(&dev, GP_REG); -} - -static int write_eeprom_reg(u16 value, u16 reg) -{ - int timeout; - - SMC_SELECT_BANK(&dev, 2); - SMC_outw(&dev, reg, PTR_REG); - - SMC_SELECT_BANK(&dev, 1); - - SMC_outw(&dev, value, GP_REG); - SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT | - CTL_STORE, CTL_REG); - - timeout = 100; - - while ((SMC_inw(&dev, CTL_REG) & CTL_STORE) && --timeout) - udelay(100); - if (timeout == 0) { - printf("Timeout writing register %02x\n", reg); - return 0; - } - - return 1; -} - -static int write_data(u16 *buf, int len) -{ - u16 reg = 0x23; - - while (len--) - write_eeprom_reg(*buf++, reg++); - - return 0; -} - -static int verify_macaddr(char *s) -{ - u16 reg; - int i, err = 0; - - puts("HWaddr: "); - for (i = 0; i < 3; i++) { - reg = read_eeprom_reg(0x20 + i); - printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n'); - if (s) - err |= reg != ((u16 *)s)[i]; - } - - return err ? 0 : 1; -} - -static int set_mac(char *s) -{ - int i; - char *e, eaddr[6]; - - /* turn string into mac value */ - for (i = 0; i < 6; i++) { - eaddr[i] = simple_strtoul(s, &e, 16); - s = (*e) ? e+1 : e; - } - - for (i = 0; i < 3; i++) - write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i); - - return 0; -} - -static int parse_element(char *s, unsigned char *buf, int len) -{ - int cnt; - char *p, num[3]; - unsigned char id; - - id = simple_strtoul(s, &p, 16); - if (*p++ != ':') - return -1; - cnt = 2; - num[2] = 0; - for (; *p; p += 2) { - if (p[1] == 0) - return -2; - if (cnt + 3 > len) - return -3; - num[0] = p[0]; - num[1] = p[1]; - buf[cnt++] = simple_strtoul(num, NULL, 16); - } - buf[0] = id; - buf[1] = cnt - 2; - - return cnt; -} - -int eeprom(int argc, char * const argv[]) -{ - int i, len, ret; - unsigned char buf[58], *p; - - app_startup(argv); - i = get_version(); - if (i != XF_VERSION) { - printf("Using ABI version %d, but U-Boot provides %d\n", - XF_VERSION, i); - return 1; - } - - if ((SMC_inw(&dev, BANK_SELECT) & 0xFF00) != 0x3300) { - puts("SMSC91111 not found\n"); - return 2; - } - - /* Called without parameters - print MAC address */ - if (argc < 2) { - verify_macaddr(NULL); - return 0; - } - - /* Print help message */ - if (argv[1][1] == 'h') { - puts("VoiceBlue EEPROM writer\n" - "Built: " U_BOOT_DATE " at " U_BOOT_TIME "\n" - "Usage:\n\t<mac_address> [<element_1>] [<...>]\n"); - return 0; - } - - /* Try to parse information elements */ - len = sizeof(buf); - p = buf; - for (i = 2; i < argc; i++) { - ret = parse_element(argv[i], p, len); - switch (ret) { - case -1: - printf("Element %d: malformed\n", i - 1); - return 3; - case -2: - printf("Element %d: odd character count\n", i - 1); - return 3; - case -3: - puts("Out of EEPROM memory\n"); - return 3; - default: - p += ret; - len -= ret; - } - } - - /* First argument (MAC) is mandatory */ - set_mac(argv[1]); - if (verify_macaddr(argv[1])) { - puts("*** HWaddr does not match! ***\n"); - return 4; - } - - while (len--) - *p++ = 0; - - write_data((u16 *)buf, sizeof(buf) >> 1); - - return 0; -} diff --git a/board/voiceblue/setup.S b/board/voiceblue/setup.S deleted file mode 100644 index 6dddd6bdcf..0000000000 --- a/board/voiceblue/setup.S +++ /dev/null @@ -1,280 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2004 Ales Jindra <jindra@2n.cz> - * (C) Copyright 2005 Ladislav Michl <michl@2n.cz> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* SDRAM load addr from config.mk */ - -OMAP5910_LPG1_BASE: .word 0xfffbd000 -OMAP5910_TIPB_SWITCHES_BASE: .word 0xfffbc800 -OMAP5910_MPU_TC_BASE: .word 0xfffecc00 -OMAP5910_MPU_CLKM_BASE: .word 0xfffece00 -OMAP5910_ULPD_PWR_MNG_BASE: .word 0xfffe0800 -OMAP5910_DPLL1_BASE: .word 0xfffecf00 -OMAP5910_GPIO_BASE: .word 0xfffce000 -OMAP5910_MPU_WD_TIMER_BASE: .word 0xfffec800 -OMAP5910_MPUI_BASE: .word 0xfffec900 - -_OMAP5910_ARM_CKCTL: .word OMAP5910_ARM_CKCTL -_OMAP5910_ARM_EN_CLK: .word OMAP5910_ARM_EN_CLK - -OMAP5910_MPUI_CTRL: .word 0x0000ff1b - -VAL_EMIFS_CS0_CONFIG: .word 0x00009090 -VAL_EMIFS_CS1_CONFIG: .word 0x00003031 -VAL_EMIFS_CS2_CONFIG: .word 0x00003031 -VAL_EMIFS_CS3_CONFIG: .word 0x0000c0c0 -VAL_EMIFS_DYN_WAIT: .word 0x00000000 -/* autorefresh counter 0x246 ((64000000/13.4)-400)/8192) */ - /* SLRF SD_RET ARE SDRAM_TYPE ARCV SDRAM_FREQUENCY PWD CLK */ -VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27)) -VAL_EMIFF_SDRAM_CONFIG2: .word 0x00000003 -VAL_EMIFF_MRS: .word 0x00000037 - -/* - * GPIO04 - D4 (Onboard LED) - * GPIO07 - LAN91C111 reset - */ -GPIO_DIRECTION: - .word 0x0000ff6f -/* - * Disable everything, but D4 LED (connected through invertor) - */ -GPIO_OUTPUT: - .word 0x00000010 - -MUX_CONFIG_BASE: - .word 0xfffe1000 - -MUX_CONFIG_VALUES: - .align 4 - .word 0x00000000 @ FUNC_MUX_CTRL_0 - .word 0x00000000 @ FUNC_MUX_CTRL_1 - .word 0x00000000 @ FUNC_MUX_CTRL_2 - .word 0x00000000 @ FUNC_MUX_CTRL_3 - .word 0x00000000 @ FUNC_MUX_CTRL_4 - .word 0x12082480 @ FUNC_MUX_CTRL_5 - .word 0x0000001c @ FUNC_MUX_CTRL_6 - .word 0x00000003 @ FUNC_MUX_CTRL_7 - .word 0x10001200 @ FUNC_MUX_CTRL_8 - .word 0x01201012 @ FUNC_MUX_CTRL_9 - .word 0x02081248 @ FUNC_MUX_CTRL_A - .word 0x00001248 @ FUNC_MUX_CTRL_B - .word 0x12240000 @ FUNC_MUX_CTRL_C - .word 0x00002000 @ FUNC_MUX_CTRL_D - .word 0x00000000 @ PULL_DWN_CTRL_0 - .word 0x0000085f @ PULL_DWN_CTRL_1 - .word 0x01001000 @ PULL_DWN_CTRL_2 - .word 0x00000000 @ PULL_DWN_CTRL_3 - .word 0x00000000 @ GATE_INH_CTRL_0 - .word 0x00000000 @ VOLTAGE_CTRL_0 - .word 0x00000000 @ TEST_DBG_CTRL_0 - .word 0x00000006 @ MOD_CONF_CTRL_0 - .word 0x0000eaef @ COMP_MODE_CTRL_0 - -MUX_CONFIG_OFFSETS: - .align 1 - .byte 0x00 @ FUNC_MUX_CTRL_0 - .byte 0x04 @ FUNC_MUX_CTRL_1 - .byte 0x08 @ FUNC_MUX_CTRL_2 - .byte 0x10 @ FUNC_MUX_CTRL_3 - .byte 0x14 @ FUNC_MUX_CTRL_4 - .byte 0x18 @ FUNC_MUX_CTRL_5 - .byte 0x1c @ FUNC_MUX_CTRL_6 - .byte 0x20 @ FUNC_MUX_CTRL_7 - .byte 0x24 @ FUNC_MUX_CTRL_8 - .byte 0x28 @ FUNC_MUX_CTRL_9 - .byte 0x2c @ FUNC_MUX_CTRL_A - .byte 0x30 @ FUNC_MUX_CTRL_B - .byte 0x34 @ FUNC_MUX_CTRL_C - .byte 0x38 @ FUNC_MUX_CTRL_D - .byte 0x40 @ PULL_DWN_CTRL_0 - .byte 0x44 @ PULL_DWN_CTRL_1 - .byte 0x48 @ PULL_DWN_CTRL_2 - .byte 0x4c @ PULL_DWN_CTRL_3 - .byte 0x50 @ GATE_INH_CTRL_0 - .byte 0x60 @ VOLTAGE_CTRL_0 - .byte 0x70 @ TEST_DBG_CTRL_0 - .byte 0x80 @ MOD_CONF_CTRL_0 - .byte 0x0c @ COMP_MODE_CTRL_0 - .byte 0xff - -.globl lowlevel_init -lowlevel_init: - /* Improve performance a bit... */ - mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register - mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register - mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register - orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000 - mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register - mov r1, #0x00 - mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache - nop - nop - nop - nop - - /* Setup clocking mode */ - ldr r0, OMAP5910_MPU_CLKM_BASE @ prepare base of CLOCK unit - ldrh r1, [r0, #0x18] @ get reset status - bic r1, r1, #(7 << 11) @ clear clock select - orr r1, r1, #(2 << 11) @ set synchronous scalable - mov r2, #0 @ set wait counter to 100 clock cycles - -icache_loop: - cmp r2, #0x01 - streqh r1, [r0, #0x18] - add r2, r2, #0x01 - cmp r2, #0x10 - bne icache_loop - nop - - /* Setup clock divisors */ - ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit - ldr r1, _OMAP5910_ARM_CKCTL - orr r1, r1, #0x2000 @ enable DSP clock - strh r1, [r0, #0x00] @ setup clock divisors - - /* Setup DPLL to generate requested freq */ - ldr r0, OMAP5910_DPLL1_BASE @ base of DPLL1 register - mov r1, #0x0010 @ set PLL_ENABLE - orr r1, r1, #0x2000 @ set IOB to new locking - orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF - orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF - strh r1, [r0] @ write - -locking: - ldrh r1, [r0] @ get DPLL value - tst r1, #0x01 - beq locking @ while LOCK not set - - /* Enable clock */ - ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit - mov r1, #(1 << 10) @ disable idle mode do not check - @ nWAKEUP pin, other remain active - strh r1, [r0, #0x04] - ldr r1, _OMAP5910_ARM_EN_CLK - strh r1, [r0, #0x08] - mov r1, #0x003f @ FLASH.RP not enabled in idle and - @ max delayed ( 32 x CLKIN ) - strh r1, [r0, #0x0c] - - /* Configure 5910 pins functions to match our board. */ - ldr r0, MUX_CONFIG_BASE - adr r1, MUX_CONFIG_VALUES - adr r2, MUX_CONFIG_OFFSETS -next_mux_cfg: - ldrb r3, [r2], #1 - ldr r4, [r1], #4 - cmp r3, #0xff - strne r4, [r0, r3] - bne next_mux_cfg - - /* Configure GPIO pins (also enables onboard LED) */ - ldr r0, OMAP5910_GPIO_BASE - ldr r1, GPIO_OUTPUT - strh r1, [r0, #0x04] - ldr r1, GPIO_DIRECTION - strh r1, [r0, #0x08] - - /* EnablePeripherals */ - ldr r0, OMAP5910_MPU_CLKM_BASE @ CLOCK unit - mov r1, #0x0001 @ Peripheral enable - strh r1, [r0, #0x14] - - /* Program LED Pulse Generator */ - ldr r0, OMAP5910_LPG1_BASE @ 1st LED Pulse Generator - mov r1, #0x7F @ Set obscure frequency in - strb r1, [r0, #0x00] @ LCR - mov r1, #0x01 @ Enable clock (CLK_EN) in - strb r1, [r0, #0x04] @ PMR - - /* TIPB Lock UART1 */ - ldr r0, OMAP5910_TIPB_SWITCHES_BASE @ prepare base of TIPB switches - mov r1, #1 @ ARM allocated - strh r1, [r0,#0x04] @ clear IRQ line and status bits - strh r1, [r0,#0x00] - ldrh r1, [r0,#0x04] - - /* Disable watchdog */ - ldr r0, OMAP5910_MPU_WD_TIMER_BASE - mov r1, #0xf5 - strh r1, [r0, #0x8] - mov r1, #0xa0 - strh r1, [r0, #0x8] - - /* Enable MCLK */ - ldr r0, OMAP5910_ULPD_PWR_MNG_BASE - mov r1, #0x6 - strh r1, [r0, #0x34] - strh r1, [r0, #0x34] - - /* Setup clock divisors */ - ldr r0, OMAP5910_ULPD_PWR_MNG_BASE @ base of ULDPL DPLL1 register - - mov r1, #0x0010 @ set PLL_ENABLE - orr r1, r1, #0x2000 @ set IOB to new locking - strh r1, [r0] @ write - -ulocking: - ldrh r1, [r0] @ get DPLL value - tst r1, #1 - beq ulocking @ while LOCK not set - - /* EMIF init */ - ldr r0, OMAP5910_MPU_TC_BASE - ldrh r1, [r0, #0x0c] @ EMIFS_CONFIG_REG - bic r1, r1, #0x0c @ pwr down disabled, flash WP - orr r1, r1, #0x01 - str r1, [r0, #0x0c] - - ldr r1, VAL_EMIFS_CS0_CONFIG - str r1, [r0, #0x10] @ EMIFS_CS0_CONFIG - ldr r1, VAL_EMIFS_CS1_CONFIG - str r1, [r0, #0x14] @ EMIFS_CS1_CONFIG - ldr r1, VAL_EMIFS_CS2_CONFIG - str r1, [r0, #0x18] @ EMIFS_CS2_CONFIG - ldr r1, VAL_EMIFS_CS3_CONFIG - str r1, [r0, #0x1c] @ EMIFS_CS3_CONFIG - ldr r1, VAL_EMIFS_DYN_WAIT - str r1, [r0, #0x40] @ EMIFS_CFG_DYN_WAIT - - /* Setup SDRAM */ - ldr r1, VAL_EMIFF_SDRAM_CONFIG - str r1, [r0, #0x20] @ EMIFF_SDRAM_CONFIG - ldr r1, VAL_EMIFF_SDRAM_CONFIG2 - str r1, [r0, #0x3c] @ EMIFF_SDRAM_CONFIG2 - ldr r1, VAL_EMIFF_MRS - str r1, [r0, #0x24] @ EMIFF_MRS - /* SDRAM needs 100us to stabilize */ - mov r0, #0x4000 -sdelay: - subs r0, r0, #0x1 - bne sdelay - - /* back to arch calling code */ - mov pc, lr -.end diff --git a/board/voiceblue/voiceblue.c b/board/voiceblue/voiceblue.c deleted file mode 100644 index 5f8af2bd24..0000000000 --- a/board/voiceblue/voiceblue.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0xaa; - - /* arch number of VoiceBlue board */ - gd->bd->bi_arch_number = MACH_TYPE_VOICEBLUE; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x10000100; - - return 0; -} - -int dram_init(void) -{ - *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0xff; - - /* Take the Ethernet controller out of reset and wait - * for the EEPROM load to complete. */ - *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80; - udelay(10); /* doesn't work before timer_init call */ - *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80; - udelay(500); - - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; -} - -int misc_init_r(void) -{ - *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0x55; - - return 0; -} - -int board_late_init(void) -{ - *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0x00; - - return 0; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/boards.cfg b/boards.cfg index c253f03deb..734ea8e0c0 100644 --- a/boards.cfg +++ b/boards.cfg @@ -35,49 +35,43 @@ # Target ARCH CPU Board name Vendor SoC Options ########################################################################################################### +integratorcp_cm1136 arm arm1136 integrator armltd - integratorcp qong arm arm1136 - davedenx mx31 mx31ads arm arm1136 - freescale mx31 imx31_litekit arm arm1136 - logicpd mx31 mx35pdk arm arm1136 - freescale mx35 omap2420h4 arm arm1136 - ti omap24xx tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x -armadillo arm arm720t ep7312 arm arm720t impa7 arm arm720t modnet50 arm arm720t +integratorap_cm720t arm arm720t integrator armltd - integratorap lpc2292sodimm arm arm720t - - lpc2292 SMN42 arm arm720t - siemens lpc2292 evb4510 arm arm720t - - s3c4510b +integratorap_cm920t arm arm920t integrator armltd - integratorap +integratorcp_cm920t arm arm920t integrator armltd - integratorcp a320evb arm arm920t - faraday a320 at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT eb_cpux9k2 arm arm920t - BuS at91 cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91 cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT -cmc_pu2 arm arm920t - - at91rm9200 -csb637 arm arm920t - - at91rm9200 -kb9202 arm arm920t - - at91rm9200 -m501sk arm arm920t - - at91rm9200 -at91rm9200dk arm arm920t - atmel at91rm9200 mx1ads arm arm920t - - imx -mx1fs2 arm arm920t - - imx scb9328 arm arm920t - - imx cm4008 arm arm920t - - ks8695 cm41xx arm arm920t - - ks8695 -sbc2410x arm arm920t - - s3c24x0 VCMA9 arm arm920t vcma9 mpl s3c24x0 -smdk2400 arm arm920t - samsung s3c24x0 smdk2410 arm arm920t - samsung s3c24x0 -netstar arm arm925t -voiceblue arm arm925t omap1510inn arm arm925t - ti -versatileqemu arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_QEMU +integratorap_cm926ejs arm arm926ejs integrator armltd - integratorap +integratorcp_cm926ejs arm arm926ejs integrator armltd - integratorcp +versatileqemu arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB versatilepb arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_PB versatileab arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_AB aspenite arm arm926ejs - Marvell armada100 gplugd arm arm926ejs - Marvell armada100 afeb9260 arm arm926ejs - - at91 -at91cap9adk arm arm926ejs - atmel at91 at91sam9260ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_NANDFLASH at91sam9260ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS0 at91sam9260ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS1 @@ -95,6 +89,7 @@ at91sam9g10ek_dataflash_cs3 arm arm926ejs at91sam9261ek atmel at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH at91sam9g20ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS0 at91sam9g20ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS1 +at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH at91sam9xeek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH @@ -102,6 +97,12 @@ at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91sam9xeek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1 snapper9260 arm arm926ejs - bluewater at91 snapper9260:AT91SAM9260 snapper9g20 arm arm926ejs snapper9260 bluewater at91 snapper9260:AT91SAM9G20 +sbc35_a9g20_nandflash arm arm926ejs sbc35_a9g20 calao at91 sbc35_a9g20:AT91SAM9G20,SYS_USE_NANDFLASH +sbc35_a9g20_eeprom arm arm926ejs sbc35_a9g20 calao at91 sbc35_a9g20:AT91SAM9G20,SYS_USE_EEPROM +tny_a9g20_nandflash arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9G20,SYS_USE_NANDFLASH +tny_a9g20_eeprom arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9G20,SYS_USE_EEPROM +tny_a9260_nandflash arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9260,SYS_USE_NANDFLASH +tny_a9260_eeprom arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9260,SYS_USE_EEPROM cpu9260 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260 cpu9260_nand arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,NANDBOOT cpu9260_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,CPU9260_128M @@ -116,8 +117,9 @@ meesc arm arm926ejs meesc esd meesc_dataflash arm arm926ejs meesc esd at91 meesc:AT91SAM9263,SYS_USE_DATAFLASH otc570 arm arm926ejs otc570 esd at91 otc570:AT91SAM9263,SYS_USE_NANDFLASH otc570_dataflash arm arm926ejs otc570 esd at91 otc570:AT91SAM9263,SYS_USE_DATAFLASH -pm9261 arm arm926ejs - ronetix at91 -pm9263 arm arm926ejs - ronetix at91 +pm9261 arm arm926ejs pm9261 ronetix at91 pm9261:AT91SAM9261 +pm9263 arm arm926ejs pm9263 ronetix at91 pm9263:AT91SAM9263 +pm9g45 arm arm926ejs pm9g45 ronetix at91 pm9g45:AT91SAM9G45 da830evm arm arm926ejs da8xxevm davinci davinci da850evm arm arm926ejs da8xxevm davinci davinci hawkboard arm arm926ejs da8xxevm davinci davinci @@ -156,6 +158,8 @@ nhk8815_onenand arm arm926ejs nhk8815 st omap5912osk arm arm926ejs - ti omap edminiv2 arm arm926ejs - LaCie orion5x dkb arm arm926ejs - Marvell pantheon +integratorap_cm946es arm arm946es integrator armltd - integratorap +integratorcp_cm946es arm arm946es integrator armltd - integratorcp ca9x4_ct_vxp arm armv7 vexpress armltd efikamx arm armv7 efikamx - mx5 efikamx:IMX_CONFIG=board/efikamx/imximage.cfg mx51evk arm armv7 mx51evk freescale mx5 mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg @@ -182,6 +186,7 @@ omap4_panda arm armv7 panda ti omap4_sdp4430 arm armv7 sdp4430 ti omap4 s5p_goni arm armv7 goni samsung s5pc1xx smdkc100 arm armv7 smdkc100 samsung s5pc1xx +origen arm armv7 origen samsung s5pc2xx s5pc210_universal arm armv7 universal_c210 samsung s5pc2xx smdkv310 arm armv7 smdkv310 samsung s5pc2xx harmony arm armv7 harmony nvidia tegra2 @@ -197,8 +202,6 @@ actux4 arm ixp dvlhost arm ixp ixdp425 arm ixp ixdpg425 arm ixp ixdp425 -lpd7a400 arm lh7a40x lpd7a40x -lpd7a404 arm lh7a40x lpd7a40x balloon3 arm pxa cerf250 arm pxa colibri_pxa270 arm pxa @@ -219,8 +222,6 @@ xaeniax arm pxa xm250 arm pxa zipitz2 arm pxa zylonite arm pxa -B2 arm s3c44b0 - dave -assabet arm sa1100 dnp1110 arm sa1100 gcplus arm sa1100 jornada arm sa1100 diff --git a/common/Makefile b/common/Makefile index d66246823c..2edbd71474 100644 --- a/common/Makefile +++ b/common/Makefile @@ -106,6 +106,7 @@ COBJS-$(CONFIG_CMD_ITEST) += cmd_itest.o COBJS-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o COBJS-$(CONFIG_CMD_CRAMFS) += cmd_cramfs.o COBJS-$(CONFIG_CMD_LDRINFO) += cmd_ldrinfo.o +COBJS-$(CONFIG_CMD_LED) += cmd_led.o COBJS-$(CONFIG_CMD_LICENSE) += cmd_license.o COBJS-y += cmd_load.o COBJS-$(CONFIG_LOGBUFFER) += cmd_log.o diff --git a/common/cmd_led.c b/common/cmd_led.c index c53195f1a3..0e4ebc59c0 100644 --- a/common/cmd_led.c +++ b/common/cmd_led.c @@ -34,8 +34,9 @@ struct led_tbl_s { char *string; /* String for use in the command */ led_id_t mask; /* Mask used for calling __led_set() */ - void (*on)(void); /* Optional fucntion for turning LED on */ - void (*off)(void); /* Optional fucntion for turning LED on */ + void (*off)(void); /* Optional function for turning LED off */ + void (*on)(void); /* Optional function for turning LED on */ + void (*toggle)(void);/* Optional function for toggling LED */ }; typedef struct led_tbl_s led_tbl_t; @@ -43,76 +44,94 @@ typedef struct led_tbl_s led_tbl_t; static const led_tbl_t led_commands[] = { #ifdef CONFIG_BOARD_SPECIFIC_LED #ifdef STATUS_LED_BIT - { "0", STATUS_LED_BIT, NULL, NULL }, + { "0", STATUS_LED_BIT, NULL, NULL, NULL }, #endif #ifdef STATUS_LED_BIT1 - { "1", STATUS_LED_BIT1, NULL, NULL }, + { "1", STATUS_LED_BIT1, NULL, NULL, NULL }, #endif #ifdef STATUS_LED_BIT2 - { "2", STATUS_LED_BIT2, NULL, NULL }, + { "2", STATUS_LED_BIT2, NULL, NULL, NULL }, #endif #ifdef STATUS_LED_BIT3 - { "3", STATUS_LED_BIT3, NULL, NULL }, + { "3", STATUS_LED_BIT3, NULL, NULL, NULL }, #endif #endif #ifdef STATUS_LED_GREEN - { "green", STATUS_LED_GREEN, green_LED_off, green_LED_on }, + { "green", STATUS_LED_GREEN, green_LED_off, green_LED_on, NULL }, #endif #ifdef STATUS_LED_YELLOW - { "yellow", STATUS_LED_YELLOW, yellow_LED_off, yellow_LED_on }, + { "yellow", STATUS_LED_YELLOW, yellow_LED_off, yellow_LED_on, NULL }, #endif #ifdef STATUS_LED_RED - { "red", STATUS_LED_RED, red_LED_off, red_LED_on }, + { "red", STATUS_LED_RED, red_LED_off, red_LED_on, NULL }, #endif #ifdef STATUS_LED_BLUE - { "blue", STATUS_LED_BLUE, blue_LED_off, blue_LED_on }, + { "blue", STATUS_LED_BLUE, blue_LED_off, blue_LED_on, NULL }, #endif - { NULL, 0, NULL, NULL } + { NULL, 0, NULL, NULL, NULL } }; -int str_onoff (char *var) +enum led_cmd { LED_ON, LED_OFF, LED_TOGGLE }; + +enum led_cmd get_led_cmd(char *var) { if (strcmp(var, "off") == 0) { - return 0; + return LED_OFF; } if (strcmp(var, "on") == 0) { - return 1; + return LED_ON; } + if (strcmp(var, "toggle") == 0) + return LED_TOGGLE; return -1; } int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - int state, i; + int i, match = 0; + enum led_cmd cmd; /* Validate arguments */ if ((argc != 3)) { return cmd_usage(cmdtp); } - state = str_onoff(argv[2]); - if (state < 0) { + cmd = get_led_cmd(argv[2]); + if (cmd < 0) { return cmd_usage(cmdtp); } for (i = 0; led_commands[i].string; i++) { if ((strcmp("all", argv[1]) == 0) || (strcmp(led_commands[i].string, argv[1]) == 0)) { - if (led_commands[i].on) { - if (state) { + match = 1; + switch (cmd) { + case LED_ON: + if (led_commands[i].on) led_commands[i].on(); - } else { + else + __led_set(led_commands[i].mask, 1); + break; + case LED_OFF: + if (led_commands[i].off) led_commands[i].off(); - } - } else { - __led_set(led_commands[i].mask, state); + else + __led_set(led_commands[i].mask, 0); + break; + case LED_TOGGLE: + if (led_commands[i].toggle) + led_commands[i].toggle(); + else + __led_toggle(led_commands[i].mask); } - break; + /* Need to set only 1 led if led_name wasn't 'all' */ + if (strcmp("all", argv[1]) != 0) + break; } } /* If we ran out of matches, print Usage */ - if (!led_commands[i].string && !(strcmp("all", argv[1]) == 0)) { + if (!match) { return cmd_usage(cmdtp); } @@ -148,6 +167,6 @@ U_BOOT_CMD( #ifdef STATUS_LED_BLUE "blue|" #endif - "all] [on|off]\n", - "led [led_name] [on|off] sets or clears led(s)\n" + "all] [on|off|toggle]\n", + "led [led_name] [on|off|toggle] sets or clears led(s)\n" ); diff --git a/doc/README.arm-caches b/doc/README.arm-caches new file mode 100644 index 0000000000..cd2b4587c2 --- /dev/null +++ b/doc/README.arm-caches @@ -0,0 +1,51 @@ +Disabling I-cache: +- Set CONFIG_SYS_ICACHE_OFF + +Disabling D-cache: +- Set CONFIG_SYS_DCACHE_OFF + +Enabling I-cache: +- Make sure CONFIG_SYS_ICACHE_OFF is not set and call icache_enable(). + +Enabling D-cache: +- Make sure CONFIG_SYS_DCACHE_OFF is not set and call dcache_enable(). + +Enabling Caches at System Startup: +- Implement enable_caches() for your platform and enable the I-cache and + D-cache from this function. This function is called immediately + after relocation. + +Guidelines for Working with D-cache: + +Memory to Peripheral DMA: +- Flush the buffer after the MPU writes the data and before the DMA is + initiated. + +Peripheral to Memory DMA: +- Invalidate the buffer before starting the DMA. In case there are any dirty + lines from the DMA buffer in the cache, subsequent cache-line replacements + may corrupt the buffer in memory while the DMA is still going on. Cache-line + replacement can happen if the CPU tries to bring some other memory locations + into the cache while the DMA is going on. +- Invalidate the buffer after the DMA is complete and before the MPU reads + it. This may be needed in addition to the invalidation before the DMA + mentioned above, because in some processors memory contents can spontaneously + come to the cache due to speculative memory access by the CPU. If this + happens with the DMA buffer while DMA is going on we have a coherency problem. + +Buffer Requirements: +- Any buffer that is invalidated(that is, typically the peripheral to + memory DMA buffer) should be aligned to cache-line boundary both at + at the beginning and at the end of the buffer. +- If the buffer is not cache-line aligned invalidation will be restricted + to the aligned part. That is, one cache-line at the respective boundary + may be left out while doing invalidation. + +Cleanup Before Linux: +- cleanup_before_linux() should flush the D-cache, invalidate I-cache, and + disable MMU and caches. +- The following sequence is advisable while disabling d-cache: + 1. disable_dcache() - flushes and disables d-cache + 2. invalidate_dcache_all() - invalid any entry that came to the cache + in the short period after the cache was flushed but before the + cache got disabled. diff --git a/doc/README.imx5 b/doc/README.imx5 new file mode 100644 index 0000000000..f7eab7d4b2 --- /dev/null +++ b/doc/README.imx5 @@ -0,0 +1,17 @@ +U-Boot for Freescale i.MX5x + +This file contains information for the port of U-Boot to the Freescale +i.MX5x SoCs. + +1. CONFIGURATION OPTIONS/SETTINGS +--------------------------------- + +1.1 CONFIG_MX51_PLL_ERRATA: Workaround for i.MX51 PLL errata. + This option should be enabled by all boards using the i.MX51 silicon + version up until (including) 3.0 running at 800MHz. + The PLL's in the i.MX51 processor can go out of lock due to a metastable + condition in an analog flip-flop when used at high frequencies. + This workaround implements an undocumented feature in the PLL (dither + mode), which causes the effect of this failure to be much lower (in terms + of frequency deviation), avoiding system failure, or at least decreasing + the likelihood of system failure. diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 4cb727f78b..8da6db6a45 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,29 @@ easily if here is something they might want to dig for... Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +at91rm9200dk arm arm920t - 2011-07-17 +m501sk arm arm920t - 2011-07-17 +kb9202 arm arm920t - 2011-07-17 +csb637 arm arm920t - 2011-07-17 +cmc_pu2 arm arm920t - 2011-07-17 +at91cap9adk arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com> +voiceblue arm arm925t - 2011-07-17 +smdk2400 arm arm920t - 2011-07-17 Gary Jennejohn <garyj@denx.de> +sbc2410x arm arm920t - 2011-07-17 +netstar arm arm925t - 2011-07-17 +mx1fs2 arm arm920t - 2011-07-17 +lpd7a404 arm lh7a40x - 2011-07-17 +edb9301 arm arm920t - 2011-07-17 +edb9302 arm arm920t - 2011-07-17 +edb9302a arm arm920t - 2011-07-17 +edb9307 arm arm920t - 2011-07-17 +edb9307a arm arm920t - 2011-07-17 +edb9312 arm arm920t - 2011-07-17 +edb9315 arm arm920t - 2011-07-17 +edb9315a arm arm920t - 2011-07-17 +B2 arm s3c44b0 - 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it> +armadillo arm arm720t - 2011-07-16 Rowel Atienza <rowel@diwalabs.com> +assabet arm sa1100 - 2011-07-16 George G. Davis <gdavis@mvista.com> trab arm S3C2400 - 2011-05-01 Gary Jennejohn <garyj@denx.de> xsengine ARM PXA2xx 4262a7c 2010-10-20 wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk> diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c index 6efbb02c16..a7f36b2933 100644 --- a/drivers/gpio/mxc_gpio.c +++ b/drivers/gpio/mxc_gpio.c @@ -2,6 +2,9 @@ * Copyright (C) 2009 * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> * + * Copyright (C) 2011 + * Stefano Babic, DENX Software Engineering, <sbabic@denx.de> + * * See file CREDITS for list of people who contributed to this * project. * @@ -22,10 +25,16 @@ */ #include <common.h> #include <asm/arch/imx-regs.h> +#include <asm/gpio.h> #include <asm/io.h> -#include <mxc_gpio.h> #include <errno.h> +enum mxc_gpio_direction { + MXC_GPIO_DIRECTION_IN, + MXC_GPIO_DIRECTION_OUT, +}; + + /* GPIO port description */ static unsigned long gpio_ports[] = { [0] = GPIO1_BASE_ADDR, @@ -41,7 +50,8 @@ static unsigned long gpio_ports[] = { #endif }; -int mxc_gpio_direction(unsigned int gpio, enum mxc_gpio_direction direction) +static int mxc_gpio_direction(unsigned int gpio, + enum mxc_gpio_direction direction) { unsigned int port = gpio >> 5; struct gpio_regs *regs; @@ -68,7 +78,7 @@ int mxc_gpio_direction(unsigned int gpio, enum mxc_gpio_direction direction) return 0; } -void mxc_gpio_set(unsigned int gpio, unsigned int value) +void gpio_set_value(int gpio, int value) { unsigned int port = gpio >> 5; struct gpio_regs *regs; @@ -89,7 +99,7 @@ void mxc_gpio_set(unsigned int gpio, unsigned int value) writel(l, ®s->gpio_dr); } -int mxc_gpio_get(unsigned int gpio) +int gpio_get_value(int gpio) { unsigned int port = gpio >> 5; struct gpio_regs *regs; @@ -106,3 +116,36 @@ int mxc_gpio_get(unsigned int gpio) return l; } + +int gpio_request(int gp, const char *label) +{ + unsigned int port = gp >> 5; + if (port >= ARRAY_SIZE(gpio_ports)) + return -EINVAL; + return 0; +} + +void gpio_free(int gp) +{ +} + +void gpio_toggle_value(int gp) +{ + gpio_set_value(gp, !gpio_get_value(gp)); +} + +int gpio_direction_input(int gp) +{ + return mxc_gpio_direction(gp, MXC_GPIO_DIRECTION_IN); +} + +int gpio_direction_output(int gp, int value) +{ + int ret = mxc_gpio_direction(gp, MXC_GPIO_DIRECTION_OUT); + + if (ret < 0) + return ret; + + gpio_set_value(gp, value); + return 0; +} diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c index a1bcddcf45..1edf9a26a2 100644 --- a/drivers/gpio/s5p_gpio.c +++ b/drivers/gpio/s5p_gpio.c @@ -36,7 +36,7 @@ #define RATE_MASK(x) (0x1 << (x + 16)) #define RATE_SET(x) (0x1 << (x + 16)) -void gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg) +void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg) { unsigned int value; @@ -46,11 +46,11 @@ void gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg) writel(value, &bank->con); } -void gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en) +void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en) { unsigned int value; - gpio_cfg_pin(bank, gpio, GPIO_OUTPUT); + s5p_gpio_cfg_pin(bank, gpio, GPIO_OUTPUT); value = readl(&bank->dat); value &= ~DAT_MASK(gpio); @@ -59,12 +59,12 @@ void gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en) writel(value, &bank->dat); } -void gpio_direction_input(struct s5p_gpio_bank *bank, int gpio) +void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio) { - gpio_cfg_pin(bank, gpio, GPIO_INPUT); + s5p_gpio_cfg_pin(bank, gpio, GPIO_INPUT); } -void gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en) +void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en) { unsigned int value; @@ -75,7 +75,7 @@ void gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en) writel(value, &bank->dat); } -unsigned int gpio_get_value(struct s5p_gpio_bank *bank, int gpio) +unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio) { unsigned int value; @@ -83,7 +83,7 @@ unsigned int gpio_get_value(struct s5p_gpio_bank *bank, int gpio) return !!(value & DAT_MASK(gpio)); } -void gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode) +void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode) { unsigned int value; @@ -102,7 +102,7 @@ void gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode) writel(value, &bank->pull); } -void gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode) +void s5p_gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode) { unsigned int value; @@ -123,7 +123,7 @@ void gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode) writel(value, &bank->drv); } -void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode) +void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode) { unsigned int value; @@ -141,3 +141,47 @@ void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode) writel(value, &bank->drv); } + +struct s5p_gpio_bank *s5p_gpio_get_bank(int nr) +{ + int bank = nr / GPIO_PER_BANK; + bank *= sizeof(struct s5p_gpio_bank); + + return (struct s5p_gpio_bank *) (s5p_gpio_base(nr) + bank); +} + +int s5p_gpio_get_pin(int nr) +{ + return nr % GPIO_PER_BANK; +} + +int gpio_request(int gpio, const char *label) +{ + return 0; +} + +int gpio_direction_input(int nr) +{ + s5p_gpio_direction_input(s5p_gpio_get_bank(nr), + s5p_gpio_get_pin(nr)); + return 0; +} + +int gpio_direction_output(int nr, int value) +{ + s5p_gpio_direction_output(s5p_gpio_get_bank(nr), + s5p_gpio_get_pin(nr), value); + return 0; +} + +int gpio_get_value(int nr) +{ + return (int) s5p_gpio_get_value(s5p_gpio_get_bank(nr), + s5p_gpio_get_pin(nr)); +} + +void gpio_set_value(int nr, int value) +{ + s5p_gpio_set_value(s5p_gpio_get_bank(nr), + s5p_gpio_get_pin(nr), value); +} diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 3968c14bb0..e5ca121ed7 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -35,7 +35,6 @@ COBJS-$(CONFIG_MMC_SPI) += mmc_spi.o COBJS-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o COBJS-$(CONFIG_MV_SDHCI) += mv_sdhci.o COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o -COBJS-$(CONFIG_OMAP3_MMC) += omap3_mmc.o COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o COBJS-$(CONFIG_S5P_MMC) += s5p_mmc.o diff --git a/drivers/mmc/omap3_mmc.c b/drivers/mmc/omap3_mmc.c deleted file mode 100644 index 15d41e55bd..0000000000 --- a/drivers/mmc/omap3_mmc.c +++ /dev/null @@ -1,570 +0,0 @@ -/* - * (C) Copyright 2008 - * Texas Instruments, <www.ti.com> - * Syed Mohammed Khasim <khasim@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation's version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <common.h> -#include <fat.h> -#include <mmc.h> -#include <part.h> -#include <i2c.h> -#include <twl4030.h> -#include <asm/io.h> - -#include "omap3_mmc.h" - -static const unsigned short mmc_transspeed_val[15][4] = { - {CLKD(10, 1), CLKD(10, 10), CLKD(10, 100), CLKD(10, 1000)}, - {CLKD(12, 1), CLKD(12, 10), CLKD(12, 100), CLKD(12, 1000)}, - {CLKD(13, 1), CLKD(13, 10), CLKD(13, 100), CLKD(13, 1000)}, - {CLKD(15, 1), CLKD(15, 10), CLKD(15, 100), CLKD(15, 1000)}, - {CLKD(20, 1), CLKD(20, 10), CLKD(20, 100), CLKD(20, 1000)}, - {CLKD(26, 1), CLKD(26, 10), CLKD(26, 100), CLKD(26, 1000)}, - {CLKD(30, 1), CLKD(30, 10), CLKD(30, 100), CLKD(30, 1000)}, - {CLKD(35, 1), CLKD(35, 10), CLKD(35, 100), CLKD(35, 1000)}, - {CLKD(40, 1), CLKD(40, 10), CLKD(40, 100), CLKD(40, 1000)}, - {CLKD(45, 1), CLKD(45, 10), CLKD(45, 100), CLKD(45, 1000)}, - {CLKD(52, 1), CLKD(52, 10), CLKD(52, 100), CLKD(52, 1000)}, - {CLKD(55, 1), CLKD(55, 10), CLKD(55, 100), CLKD(55, 1000)}, - {CLKD(60, 1), CLKD(60, 10), CLKD(60, 100), CLKD(60, 1000)}, - {CLKD(70, 1), CLKD(70, 10), CLKD(70, 100), CLKD(70, 1000)}, - {CLKD(80, 1), CLKD(80, 10), CLKD(80, 100), CLKD(80, 1000)} -}; - -static mmc_card_data cur_card_data; -static block_dev_desc_t mmc_blk_dev; -static hsmmc_t *mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE; - -int mmc_set_dev(int dev_num) -{ - switch (dev_num) { - case 1: - mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE; - break; - case 2: - mmc_base = (hsmmc_t *)OMAP_HSMMC2_BASE; - break; - case 3: - mmc_base = (hsmmc_t *)OMAP_HSMMC3_BASE; - break; - default: - mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE; - return 1; - } - - return 0; -} - -block_dev_desc_t *mmc_get_dev(int dev) -{ - return (block_dev_desc_t *) &mmc_blk_dev; -} - -static unsigned char mmc_board_init(void) -{ -#if defined(CONFIG_TWL4030_POWER) - twl4030_power_mmc_init(); -#endif - -#if defined(CONFIG_OMAP34XX) - t2_t *t2_base = (t2_t *)T2_BASE; - struct prcm *prcm_base = (struct prcm *)PRCM_BASE; - - writel(readl(&t2_base->pbias_lite) | PBIASLITEPWRDNZ1 | - PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0, - &t2_base->pbias_lite); - - writel(readl(&t2_base->devconf0) | MMCSDIO1ADPCLKISEL, - &t2_base->devconf0); - - writel(readl(&t2_base->devconf1) | MMCSDIO2ADPCLKISEL, - &t2_base->devconf1); - - writel(readl(&prcm_base->fclken1_core) | - EN_MMC1 | EN_MMC2 | EN_MMC3, - &prcm_base->fclken1_core); - - writel(readl(&prcm_base->iclken1_core) | - EN_MMC1 | EN_MMC2 | EN_MMC3, - &prcm_base->iclken1_core); -#endif - -/* TODO add appropriate OMAP4 init */ - - return 1; -} - -static void mmc_init_stream(void) -{ - writel(readl(&mmc_base->con) | INIT_INITSTREAM, &mmc_base->con); - - writel(MMC_CMD0, &mmc_base->cmd); - while (!(readl(&mmc_base->stat) & CC_MASK)); - - writel(CC_MASK, &mmc_base->stat); - - writel(MMC_CMD0, &mmc_base->cmd); - while (!(readl(&mmc_base->stat) & CC_MASK)); - - writel(readl(&mmc_base->con) & ~INIT_INITSTREAM, &mmc_base->con); -} - -static unsigned char mmc_clock_config(unsigned int iclk, unsigned short clk_div) -{ - unsigned int val; - - mmc_reg_out(&mmc_base->sysctl, (ICE_MASK | DTO_MASK | CEN_MASK), - (ICE_STOP | DTO_15THDTO | CEN_DISABLE)); - - switch (iclk) { - case CLK_INITSEQ: - val = MMC_INIT_SEQ_CLK / 2; - break; - case CLK_400KHZ: - val = MMC_400kHz_CLK; - break; - case CLK_MISC: - val = clk_div; - break; - default: - return 0; - } - mmc_reg_out(&mmc_base->sysctl, ICE_MASK | CLKD_MASK, - (val << CLKD_OFFSET) | ICE_OSCILLATE); - - while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY); - - writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl); - return 1; -} - -static unsigned char mmc_init_setup(void) -{ - unsigned int reg_val; - - mmc_board_init(); - - writel(readl(&mmc_base->sysconfig) | MMC_SOFTRESET, - &mmc_base->sysconfig); - while ((readl(&mmc_base->sysstatus) & RESETDONE) == 0); - - writel(readl(&mmc_base->sysctl) | SOFTRESETALL, &mmc_base->sysctl); - while ((readl(&mmc_base->sysctl) & SOFTRESETALL) != 0x0); - - writel(DTW_1_BITMODE | SDBP_PWROFF | SDVS_3V0, &mmc_base->hctl); - writel(readl(&mmc_base->capa) | VS30_3V0SUP | VS18_1V8SUP, - &mmc_base->capa); - - reg_val = readl(&mmc_base->con) & RESERVED_MASK; - - writel(CTPL_MMC_SD | reg_val | WPP_ACTIVEHIGH | CDP_ACTIVEHIGH | - MIT_CTO | DW8_1_4BITMODE | MODE_FUNC | STR_BLOCK | - HR_NOHOSTRESP | INIT_NOINIT | NOOPENDRAIN, &mmc_base->con); - - mmc_clock_config(CLK_INITSEQ, 0); - writel(readl(&mmc_base->hctl) | SDBP_PWRON, &mmc_base->hctl); - - writel(IE_BADA | IE_CERR | IE_DEB | IE_DCRC | IE_DTO | IE_CIE | - IE_CEB | IE_CCRC | IE_CTO | IE_BRR | IE_BWR | IE_TC | IE_CC, - &mmc_base->ie); - - mmc_init_stream(); - return 1; -} - -static unsigned char mmc_send_cmd(unsigned int cmd, unsigned int arg, - unsigned int *response) -{ - unsigned int mmc_stat; - - while ((readl(&mmc_base->pstate) & DATI_MASK) == DATI_CMDDIS); - - writel(BLEN_512BYTESLEN | NBLK_STPCNT, &mmc_base->blk); - writel(0xFFFFFFFF, &mmc_base->stat); - writel(arg, &mmc_base->arg); - writel(cmd | CMD_TYPE_NORMAL | CICE_NOCHECK | CCCE_NOCHECK | - MSBS_SGLEBLK | ACEN_DISABLE | BCE_DISABLE | DE_DISABLE, - &mmc_base->cmd); - - while (1) { - do { - mmc_stat = readl(&mmc_base->stat); - } while (mmc_stat == 0); - - if ((mmc_stat & ERRI_MASK) != 0) - return (unsigned char) mmc_stat; - - if (mmc_stat & CC_MASK) { - writel(CC_MASK, &mmc_base->stat); - response[0] = readl(&mmc_base->rsp10); - if ((cmd & RSP_TYPE_MASK) == RSP_TYPE_LGHT136) { - response[1] = readl(&mmc_base->rsp32); - response[2] = readl(&mmc_base->rsp54); - response[3] = readl(&mmc_base->rsp76); - } - break; - } - } - return 1; -} - -static unsigned char mmc_read_data(unsigned int *output_buf) -{ - unsigned int mmc_stat; - unsigned int read_count = 0; - - /* - * Start Polled Read - */ - while (1) { - do { - mmc_stat = readl(&mmc_base->stat); - } while (mmc_stat == 0); - - if ((mmc_stat & ERRI_MASK) != 0) - return (unsigned char) mmc_stat; - - if (mmc_stat & BRR_MASK) { - unsigned int k; - - writel(readl(&mmc_base->stat) | BRR_MASK, - &mmc_base->stat); - for (k = 0; k < MMCSD_SECTOR_SIZE / 4; k++) { - *output_buf = readl(&mmc_base->data); - output_buf++; - read_count += 4; - } - } - - if (mmc_stat & BWR_MASK) - writel(readl(&mmc_base->stat) | BWR_MASK, - &mmc_base->stat); - - if (mmc_stat & TC_MASK) { - writel(readl(&mmc_base->stat) | TC_MASK, - &mmc_base->stat); - break; - } - } - return 1; -} - -static unsigned char mmc_detect_card(mmc_card_data *mmc_card_cur) -{ - unsigned char err; - unsigned int argument = 0; - unsigned int ocr_value, ocr_recvd, ret_cmd41, hcs_val; - unsigned short retry_cnt = 2000; - mmc_resp_t mmc_resp; - - /* Set to Initialization Clock */ - err = mmc_clock_config(CLK_400KHZ, 0); - if (err != 1) - return err; - - mmc_card_cur->RCA = MMC_RELATIVE_CARD_ADDRESS; - argument = 0x00000000; - - ocr_value = (0x1FF << 15); - err = mmc_send_cmd(MMC_CMD0, argument, mmc_resp.resp); - if (err != 1) - return err; - - argument = SD_CMD8_CHECK_PATTERN | SD_CMD8_2_7_3_6_V_RANGE; - err = mmc_send_cmd(MMC_SDCMD8, argument, mmc_resp.resp); - hcs_val = (err == 1) ? - MMC_OCR_REG_HOST_CAPACITY_SUPPORT_SECTOR : - MMC_OCR_REG_HOST_CAPACITY_SUPPORT_BYTE; - - argument = 0x0000 << 16; - err = mmc_send_cmd(MMC_CMD55, argument, mmc_resp.resp); - if (err == 1) { - mmc_card_cur->card_type = SD_CARD; - ocr_value |= hcs_val; - ret_cmd41 = MMC_ACMD41; - } else { - mmc_card_cur->card_type = MMC_CARD; - ocr_value |= MMC_OCR_REG_ACCESS_MODE_SECTOR; - ret_cmd41 = MMC_CMD1; - writel(readl(&mmc_base->con) & ~OD, &mmc_base->con); - writel(readl(&mmc_base->con) | OPENDRAIN, &mmc_base->con); - } - - argument = ocr_value; - err = mmc_send_cmd(ret_cmd41, argument, mmc_resp.resp); - if (err != 1) - return err; - - ocr_recvd = mmc_resp.r3.ocr; - - while (!(ocr_recvd & (0x1 << 31)) && (retry_cnt > 0)) { - retry_cnt--; - if (mmc_card_cur->card_type == SD_CARD) { - argument = 0x0000 << 16; - err = mmc_send_cmd(MMC_CMD55, argument, mmc_resp.resp); - } - - argument = ocr_value; - err = mmc_send_cmd(ret_cmd41, argument, mmc_resp.resp); - if (err != 1) - return err; - ocr_recvd = mmc_resp.r3.ocr; - } - - if (!(ocr_recvd & (0x1 << 31))) - return 0; - - if (mmc_card_cur->card_type == MMC_CARD) { - if ((ocr_recvd & MMC_OCR_REG_ACCESS_MODE_MASK) == - MMC_OCR_REG_ACCESS_MODE_SECTOR) { - mmc_card_cur->mode = SECTOR_MODE; - } else { - mmc_card_cur->mode = BYTE_MODE; - } - - ocr_recvd &= ~MMC_OCR_REG_ACCESS_MODE_MASK; - } else { - if ((ocr_recvd & MMC_OCR_REG_HOST_CAPACITY_SUPPORT_MASK) - == MMC_OCR_REG_HOST_CAPACITY_SUPPORT_SECTOR) { - mmc_card_cur->mode = SECTOR_MODE; - } else { - mmc_card_cur->mode = BYTE_MODE; - } - ocr_recvd &= ~MMC_OCR_REG_HOST_CAPACITY_SUPPORT_MASK; - } - - ocr_recvd &= ~(0x1 << 31); - if (!(ocr_recvd & ocr_value)) - return 0; - - err = mmc_send_cmd(MMC_CMD2, argument, mmc_resp.resp); - if (err != 1) - return err; - - if (mmc_card_cur->card_type == MMC_CARD) { - argument = mmc_card_cur->RCA << 16; - err = mmc_send_cmd(MMC_CMD3, argument, mmc_resp.resp); - if (err != 1) - return err; - } else { - argument = 0x00000000; - err = mmc_send_cmd(MMC_SDCMD3, argument, mmc_resp.resp); - if (err != 1) - return err; - - mmc_card_cur->RCA = mmc_resp.r6.newpublishedrca; - } - - writel(readl(&mmc_base->con) & ~OD, &mmc_base->con); - writel(readl(&mmc_base->con) | NOOPENDRAIN, &mmc_base->con); - return 1; -} - -static unsigned char mmc_read_cardsize(mmc_card_data *mmc_dev_data, - mmc_csd_reg_t *cur_csd) -{ - mmc_extended_csd_reg_t ext_csd; - unsigned int size, count, blk_len, blk_no, card_size, argument; - unsigned char err; - unsigned int resp[4]; - - if (mmc_dev_data->mode == SECTOR_MODE) { - if (mmc_dev_data->card_type == SD_CARD) { - card_size = - (((mmc_sd2_csd_reg_t *) cur_csd)-> - c_size_lsb & MMC_SD2_CSD_C_SIZE_LSB_MASK) | - ((((mmc_sd2_csd_reg_t *) cur_csd)-> - c_size_msb & MMC_SD2_CSD_C_SIZE_MSB_MASK) - << MMC_SD2_CSD_C_SIZE_MSB_OFFSET); - mmc_dev_data->size = card_size * 1024; - if (mmc_dev_data->size == 0) - return 0; - } else { - argument = 0x00000000; - err = mmc_send_cmd(MMC_CMD8, argument, resp); - if (err != 1) - return err; - err = mmc_read_data((unsigned int *) &ext_csd); - if (err != 1) - return err; - mmc_dev_data->size = ext_csd.sectorcount; - - if (mmc_dev_data->size == 0) - mmc_dev_data->size = 8388608; - } - } else { - if (cur_csd->c_size_mult >= 8) - return 0; - - if (cur_csd->read_bl_len >= 12) - return 0; - - /* Compute size */ - count = 1 << (cur_csd->c_size_mult + 2); - card_size = (cur_csd->c_size_lsb & MMC_CSD_C_SIZE_LSB_MASK) | - ((cur_csd->c_size_msb & MMC_CSD_C_SIZE_MSB_MASK) - << MMC_CSD_C_SIZE_MSB_OFFSET); - blk_no = (card_size + 1) * count; - blk_len = 1 << cur_csd->read_bl_len; - size = blk_no * blk_len; - mmc_dev_data->size = size / MMCSD_SECTOR_SIZE; - if (mmc_dev_data->size == 0) - return 0; - } - return 1; -} - -static unsigned long mmc_bread(int dev_num, unsigned long blknr, - lbaint_t blkcnt, void *dst) -{ - unsigned char err; - unsigned int argument; - unsigned int resp[4]; - unsigned int *output_buf = dst; - unsigned int sec_inc_val; - lbaint_t i; - - if (blkcnt == 0) - return 0; - - if (cur_card_data.mode == SECTOR_MODE) { - argument = blknr; - sec_inc_val = 1; - } else { - argument = blknr * MMCSD_SECTOR_SIZE; - sec_inc_val = MMCSD_SECTOR_SIZE; - } - - for (i = 0; i < blkcnt; i++) { - err = mmc_send_cmd(MMC_CMD17, argument, resp); - if (err != 1) { - printf("mmc: CMD17 failed, status = %08x\n", err); - break; - } - - err = mmc_read_data(output_buf); - if (err != 1) { - printf("mmc: read failed, status = %08x\n", err); - break; - } - - output_buf += (MMCSD_SECTOR_SIZE / 4); - argument += sec_inc_val; - } - - return i; -} - -static unsigned char configure_mmc(mmc_card_data *mmc_card_cur) -{ - unsigned char ret_val; - unsigned int argument; - unsigned int trans_clk, trans_fact, trans_unit, retries = 2; - unsigned char trans_speed; - mmc_resp_t mmc_resp; - - ret_val = mmc_init_setup(); - - if (ret_val != 1) - return ret_val; - - do { - ret_val = mmc_detect_card(mmc_card_cur); - retries--; - } while ((retries > 0) && (ret_val != 1)); - - argument = mmc_card_cur->RCA << 16; - ret_val = mmc_send_cmd(MMC_CMD9, argument, mmc_resp.resp); - if (ret_val != 1) - return ret_val; - - if (mmc_card_cur->card_type == MMC_CARD) - mmc_card_cur->version = mmc_resp.Card_CSD.spec_vers; - - trans_speed = mmc_resp.Card_CSD.tran_speed; - - ret_val = mmc_send_cmd(MMC_CMD4, MMC_DSR_DEFAULT << 16, mmc_resp.resp); - if (ret_val != 1) - return ret_val; - - trans_unit = trans_speed & MMC_CSD_TRAN_SPEED_UNIT_MASK; - trans_fact = trans_speed & MMC_CSD_TRAN_SPEED_FACTOR_MASK; - - if (trans_unit > MMC_CSD_TRAN_SPEED_UNIT_100MHZ) - return 0; - - if ((trans_fact < MMC_CSD_TRAN_SPEED_FACTOR_1_0) || - (trans_fact > MMC_CSD_TRAN_SPEED_FACTOR_8_0)) - return 0; - - trans_unit >>= 0; - trans_fact >>= 3; - - trans_clk = mmc_transspeed_val[trans_fact - 1][trans_unit] * 2; - ret_val = mmc_clock_config(CLK_MISC, trans_clk); - - if (ret_val != 1) - return ret_val; - - argument = mmc_card_cur->RCA << 16; - ret_val = mmc_send_cmd(MMC_CMD7_SELECT, argument, mmc_resp.resp); - if (ret_val != 1) - return ret_val; - - /* Configure the block length to 512 bytes */ - argument = MMCSD_SECTOR_SIZE; - ret_val = mmc_send_cmd(MMC_CMD16, argument, mmc_resp.resp); - if (ret_val != 1) - return ret_val; - - /* get the card size in sectors */ - ret_val = mmc_read_cardsize(mmc_card_cur, &mmc_resp.Card_CSD); - if (ret_val != 1) - return ret_val; - - return 1; -} - -int mmc_legacy_init(int dev) -{ - if (mmc_set_dev(dev) != 0) - return 1; - - if (configure_mmc(&cur_card_data) != 1) - return 1; - - mmc_blk_dev.if_type = IF_TYPE_MMC; - mmc_blk_dev.part_type = PART_TYPE_DOS; - mmc_blk_dev.dev = 0; - mmc_blk_dev.lun = 0; - mmc_blk_dev.type = 0; - - /* FIXME fill in the correct size (is set to 32MByte) */ - mmc_blk_dev.blksz = MMCSD_SECTOR_SIZE; - mmc_blk_dev.lba = 0x10000; - mmc_blk_dev.removable = 0; - mmc_blk_dev.block_read = mmc_bread; - - fat_register_device(&mmc_blk_dev, 1); - return 0; -} diff --git a/drivers/mmc/omap3_mmc.h b/drivers/mmc/omap3_mmc.h deleted file mode 100644 index e4d263c877..0000000000 --- a/drivers/mmc/omap3_mmc.h +++ /dev/null @@ -1,233 +0,0 @@ -/* - * (C) Copyright 2008 - * Texas Instruments, <www.ti.com> - * Syed Mohammed Khasim <khasim@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation's version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef MMC_H -#define MMC_H - -#include <asm/arch/mmc_host_def.h> - -/* Responses */ -#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) -#define RSP_TYPE_R1 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK) -#define RSP_TYPE_R1B (RSP_TYPE_LGHT48B | CCCE_CHECK | CICE_CHECK) -#define RSP_TYPE_R2 (RSP_TYPE_LGHT136 | CCCE_CHECK | CICE_NOCHECK) -#define RSP_TYPE_R3 (RSP_TYPE_LGHT48 | CCCE_NOCHECK | CICE_NOCHECK) -#define RSP_TYPE_R4 (RSP_TYPE_LGHT48 | CCCE_NOCHECK | CICE_NOCHECK) -#define RSP_TYPE_R5 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK) -#define RSP_TYPE_R6 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK) -#define RSP_TYPE_R7 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK) - -/* All supported commands */ -#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) -#define MMC_CMD1 (INDEX(1) | RSP_TYPE_R3 | DP_NO_DATA | DDIR_WRITE) -#define MMC_CMD2 (INDEX(2) | RSP_TYPE_R2 | DP_NO_DATA | DDIR_WRITE) -#define MMC_CMD3 (INDEX(3) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE) -#define MMC_SDCMD3 (INDEX(3) | RSP_TYPE_R6 | DP_NO_DATA | DDIR_WRITE) -#define MMC_CMD4 (INDEX(4) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) -#define MMC_CMD6 (INDEX(6) | RSP_TYPE_R1B | DP_NO_DATA | DDIR_WRITE) -#define MMC_CMD7_SELECT (INDEX(7) | RSP_TYPE_R1B | DP_NO_DATA | DDIR_WRITE) -#define MMC_CMD7_DESELECT (INDEX(7)| RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) -#define MMC_CMD8 (INDEX(8) | RSP_TYPE_R1 | DP_DATA | DDIR_READ) -#define MMC_SDCMD8 (INDEX(8) | RSP_TYPE_R7 | DP_NO_DATA | DDIR_WRITE) -#define MMC_CMD9 (INDEX(9) | RSP_TYPE_R2 | DP_NO_DATA | DDIR_WRITE) -#define MMC_CMD12 (INDEX(12) | RSP_TYPE_R1B | DP_NO_DATA | DDIR_WRITE) -#define MMC_CMD13 (INDEX(13) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE) -#define MMC_CMD15 (INDEX(15) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) -#define MMC_CMD16 (INDEX(16) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE) -#define MMC_CMD17 (INDEX(17) | RSP_TYPE_R1 | DP_DATA | DDIR_READ) -#define MMC_CMD24 (INDEX(24) | RSP_TYPE_R1 | DP_DATA | DDIR_WRITE) -#define MMC_ACMD6 (INDEX(6) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE) -#define MMC_ACMD41 (INDEX(41) | RSP_TYPE_R3 | DP_NO_DATA | DDIR_WRITE) -#define MMC_ACMD51 (INDEX(51) | RSP_TYPE_R1 | DP_DATA | DDIR_READ) -#define MMC_CMD55 (INDEX(55) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE) - -#define MMC_AC_CMD_RCA_MASK (unsigned int)(0xFFFF << 16) -#define MMC_BC_CMD_DSR_MASK (unsigned int)(0xFFFF << 16) -#define MMC_DSR_DEFAULT 0x0404 -#define SD_CMD8_CHECK_PATTERN 0xAA -#define SD_CMD8_2_7_3_6_V_RANGE (0x01 << 8) - -/* Clock Configurations and Macros */ - -#define MMC_CLOCK_REFERENCE 96 -#define MMC_RELATIVE_CARD_ADDRESS 0x1234 -#define MMC_INIT_SEQ_CLK (MMC_CLOCK_REFERENCE * 1000 / 80) -#define MMC_400kHz_CLK (MMC_CLOCK_REFERENCE * 1000 / 400) -#define CLKDR(r, f, u) ((((r)*100) / ((f)*(u))) + 1) -#define CLKD(f, u) (CLKDR(MMC_CLOCK_REFERENCE, f, u)) - -#define MMC_OCR_REG_ACCESS_MODE_MASK (0x3 << 29) -#define MMC_OCR_REG_ACCESS_MODE_BYTE (0x0 << 29) -#define MMC_OCR_REG_ACCESS_MODE_SECTOR (0x2 << 29) - -#define MMC_OCR_REG_HOST_CAPACITY_SUPPORT_MASK (0x1 << 30) -#define MMC_OCR_REG_HOST_CAPACITY_SUPPORT_BYTE (0x0 << 30) -#define MMC_OCR_REG_HOST_CAPACITY_SUPPORT_SECTOR (0x1 << 30) - -#define MMC_SD2_CSD_C_SIZE_LSB_MASK 0xFFFF -#define MMC_SD2_CSD_C_SIZE_MSB_MASK 0x003F -#define MMC_SD2_CSD_C_SIZE_MSB_OFFSET 16 -#define MMC_CSD_C_SIZE_LSB_MASK 0x0003 -#define MMC_CSD_C_SIZE_MSB_MASK 0x03FF -#define MMC_CSD_C_SIZE_MSB_OFFSET 2 - -#define MMC_CSD_TRAN_SPEED_UNIT_MASK (0x07 << 0) -#define MMC_CSD_TRAN_SPEED_FACTOR_MASK (0x0F << 3) -#define MMC_CSD_TRAN_SPEED_UNIT_100MHZ (0x3 << 0) -#define MMC_CSD_TRAN_SPEED_FACTOR_1_0 (0x01 << 3) -#define MMC_CSD_TRAN_SPEED_FACTOR_8_0 (0x0F << 3) - -typedef struct { - unsigned not_used:1; - unsigned crc:7; - unsigned ecc:2; - unsigned file_format:2; - unsigned tmp_write_protect:1; - unsigned perm_write_protect:1; - unsigned copy:1; - unsigned file_format_grp:1; - unsigned content_prot_app:1; - unsigned reserved_1:4; - unsigned write_bl_partial:1; - unsigned write_bl_len:4; - unsigned r2w_factor:3; - unsigned default_ecc:2; - unsigned wp_grp_enable:1; - unsigned wp_grp_size:5; - unsigned erase_grp_mult:5; - unsigned erase_grp_size:5; - unsigned c_size_mult:3; - unsigned vdd_w_curr_max:3; - unsigned vdd_w_curr_min:3; - unsigned vdd_r_curr_max:3; - unsigned vdd_r_curr_min:3; - unsigned c_size_lsb:2; - unsigned c_size_msb:10; - unsigned reserved_2:2; - unsigned dsr_imp:1; - unsigned read_blk_misalign:1; - unsigned write_blk_misalign:1; - unsigned read_bl_partial:1; - unsigned read_bl_len:4; - unsigned ccc:12; - unsigned tran_speed:8; - unsigned nsac:8; - unsigned taac:8; - unsigned reserved_3:2; - unsigned spec_vers:4; - unsigned csd_structure:2; -} mmc_csd_reg_t; - -/* csd for sd2.0 */ -typedef struct { - unsigned not_used:1; - unsigned crc:7; - unsigned reserved_1:2; - unsigned file_format:2; - unsigned tmp_write_protect:1; - unsigned perm_write_protect:1; - unsigned copy:1; - unsigned file_format_grp:1; - unsigned reserved_2:5; - unsigned write_bl_partial:1; - unsigned write_bl_len:4; - unsigned r2w_factor:3; - unsigned reserved_3:2; - unsigned wp_grp_enable:1; - unsigned wp_grp_size:7; - unsigned sector_size:7; - unsigned erase_blk_len:1; - unsigned reserved_4:1; - unsigned c_size_lsb:16; - unsigned c_size_msb:6; - unsigned reserved_5:6; - unsigned dsr_imp:1; - unsigned read_blk_misalign:1; - unsigned write_blk_misalign:1; - unsigned read_bl_partial:1; - unsigned read_bl_len:4; - unsigned ccc:12; - unsigned tran_speed:8; - unsigned nsac:8; - unsigned taac:8; - unsigned reserved_6:6; - unsigned csd_structure:2; -} mmc_sd2_csd_reg_t; - -/* extended csd - 512 bytes long */ -typedef struct { - unsigned char reserved_1[181]; - unsigned char erasedmemorycontent; - unsigned char reserved_2; - unsigned char buswidthmode; - unsigned char reserved_3; - unsigned char highspeedinterfacetiming; - unsigned char reserved_4; - unsigned char powerclass; - unsigned char reserved_5; - unsigned char commandsetrevision; - unsigned char reserved_6; - unsigned char commandset; - unsigned char extendedcsdrevision; - unsigned char reserved_7; - unsigned char csdstructureversion; - unsigned char reserved_8; - unsigned char cardtype; - unsigned char reserved_9[3]; - unsigned char powerclass_52mhz_1_95v; - unsigned char powerclass_26mhz_1_95v; - unsigned char powerclass_52mhz_3_6v; - unsigned char powerclass_26mhz_3_6v; - unsigned char reserved_10; - unsigned char minreadperf_4b_26mhz; - unsigned char minwriteperf_4b_26mhz; - unsigned char minreadperf_8b_26mhz_4b_52mhz; - unsigned char minwriteperf_8b_26mhz_4b_52mhz; - unsigned char minreadperf_8b_52mhz; - unsigned char minwriteperf_8b_52mhz; - unsigned char reserved_11; - unsigned int sectorcount; - unsigned char reserved_12[288]; - unsigned char supportedcommandsets; - unsigned char reserved_13[7]; -} mmc_extended_csd_reg_t; - -/* mmc sd responce */ -typedef struct { - unsigned int ocr; -} mmc_resp_r3; - -typedef struct { - unsigned short cardstatus; - unsigned short newpublishedrca; -} mmc_resp_r6; - -typedef union { - unsigned int resp[4]; - mmc_resp_r3 r3; - mmc_resp_r6 r6; - mmc_csd_reg_t Card_CSD; -} mmc_resp_t; - -#endif /* MMC_H */ diff --git a/drivers/mmc/s5p_mmc.c b/drivers/mmc/s5p_mmc.c index f1368132a3..7786ecf2be 100644 --- a/drivers/mmc/s5p_mmc.c +++ b/drivers/mmc/s5p_mmc.c @@ -232,9 +232,15 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, __func__, mask); return -1; } else if (mask & (1 << 3)) { - /* DMA Interrupt */ + /* + * DMA Interrupt, restart the transfer where + * it was interrupted. + */ + unsigned int address = readl(&host->reg->sysad); + debug("DMA end\n"); - break; + writel((1 << 3), &host->reg->norintsts); + writel(address, &host->reg->sysad); } else if (mask & (1 << 1)) { /* Transfer Complete */ debug("r/w is done\n"); @@ -425,12 +431,13 @@ static int mmc_core_init(struct mmc *mmc) * NORMAL Interrupt Status Enable Register init * [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable * [4] ENSTABUFWTRDY : Buffer write Ready Status Enable + * [3] ENSTADMAINT : DMA Interrupt Status Enable * [1] ENSTASTANSCMPLT : Transfre Complete Status Enable * [0] ENSTACMDCMPLT : Command Complete Status Enable - */ + */ mask = readl(&host->reg->norintstsen); mask &= ~(0xffff); - mask |= (1 << 5) | (1 << 4) | (1 << 1) | (1 << 0); + mask |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 1) | (1 << 0); writel(mask, &host->reg->norintstsen); /* diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 66c0d13c2b..c0b8929258 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -457,7 +457,7 @@ static void davinci_eth_ch_teardown(int ch) if (ch == EMAC_CH_TX) { /* Init TX channel teardown */ - writel(1, &adap_emac->TXTEARDOWN); + writel(0, &adap_emac->TXTEARDOWN); do { /* * Wait here for Tx teardown completion interrupt to @@ -476,7 +476,7 @@ static void davinci_eth_ch_teardown(int ch) writel(0, &adap_emac->TX0HDP); } else { /* Init RX channel teardown */ - writel(1, &adap_emac->RXTEARDOWN); + writel(0, &adap_emac->RXTEARDOWN); do { /* * Wait here for Rx teardown completion interrupt to diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index 81381d9b9a..2fa748608f 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -23,7 +23,7 @@ #include <spi.h> #include <asm/errno.h> #include <asm/io.h> -#include <mxc_gpio.h> +#include <asm/gpio.h> #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> @@ -145,14 +145,14 @@ void spi_cs_activate(struct spi_slave *slave) { struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); if (mxcs->gpio > 0) - mxc_gpio_set(mxcs->gpio, mxcs->ss_pol); + gpio_set_value(mxcs->gpio, mxcs->ss_pol); } void spi_cs_deactivate(struct spi_slave *slave) { struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); if (mxcs->gpio > 0) - mxc_gpio_set(mxcs->gpio, + gpio_set_value(mxcs->gpio, !(mxcs->ss_pol)); } @@ -468,7 +468,7 @@ static int decode_cs(struct mxc_spi_slave *mxcs, unsigned int cs) if (cs > 3) { mxcs->gpio = cs >> 8; cs &= 3; - ret = mxc_gpio_direction(mxcs->gpio, OUT); + ret = gpio_direction_output(mxcs->gpio, 0); if (ret) { printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio); return -EINVAL; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 70c02c9deb..2197119cf7 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -461,7 +461,6 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, /* Check that the TD processing happened */ if (token & 0x80) { printf("EHCI timed out on TD - token=%#x\n", token); - goto fail; } /* Disable async schedule. */ diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 945ab64f95..3d0ad0c852 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -55,7 +55,7 @@ struct ehci_hccr { #define HCS_N_PORTS(p) (((p) >> 0) & 0xf) uint32_t cr_hccparams; uint8_t cr_hcsp_portrt[8]; -} __attribute__ ((packed)); +} __attribute__ ((packed, aligned(4))); struct ehci_hcor { uint32_t or_usbcmd; @@ -85,7 +85,7 @@ struct ehci_hcor { #define FLAG_CF (1 << 0) /* true: we'll support "high speed" */ uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS]; uint32_t or_systune; -} __attribute__ ((packed)); +} __attribute__ ((packed, aligned(4))); #define USBMODE 0x68 /* USB Device mode */ #define USBMODE_SDIS (1 << 3) /* Stream disable */ diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 086dc05383..226684ad5d 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -41,6 +41,8 @@ COBJS-$(CONFIG_SED156X) += sed156x.o COBJS-$(CONFIG_VIDEO_SM501) += sm501.o COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o COBJS-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o +COBJS-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o +COBJS-y += videomodes.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/video/omap3_dss.c b/drivers/video/omap3_dss.c new file mode 100644 index 0000000000..b322cc3579 --- /dev/null +++ b/drivers/video/omap3_dss.c @@ -0,0 +1,131 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * Referred to Linux Kernel DSS driver files for OMAP3 by + * Tomi Valkeinen from drivers/video/omap2/dss/ + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation's version 2 and any + * later version the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/dss.h> + +/* + * Configure VENC for a given Mode (NTSC / PAL) + */ +void omap3_dss_venc_config(const struct venc_regs *venc_cfg, + u32 height, u32 width) +{ + struct venc_regs *venc = (struct venc_regs *) OMAP3_VENC_BASE; + struct dss_regs *dss = (struct dss_regs *) OMAP3_DSS_BASE; + struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE; + + writel(venc_cfg->status, &venc->status); + writel(venc_cfg->f_control, &venc->f_control); + writel(venc_cfg->vidout_ctrl, &venc->vidout_ctrl); + writel(venc_cfg->sync_ctrl, &venc->sync_ctrl); + writel(venc_cfg->llen, &venc->llen); + writel(venc_cfg->flens, &venc->flens); + writel(venc_cfg->hfltr_ctrl, &venc->hfltr_ctrl); + writel(venc_cfg->cc_carr_wss_carr, &venc->cc_carr_wss_carr); + writel(venc_cfg->c_phase, &venc->c_phase); + writel(venc_cfg->gain_u, &venc->gain_u); + writel(venc_cfg->gain_v, &venc->gain_v); + writel(venc_cfg->gain_y, &venc->gain_y); + writel(venc_cfg->black_level, &venc->black_level); + writel(venc_cfg->blank_level, &venc->blank_level); + writel(venc_cfg->x_color, &venc->x_color); + writel(venc_cfg->m_control, &venc->m_control); + writel(venc_cfg->bstamp_wss_data, &venc->bstamp_wss_data); + writel(venc_cfg->s_carr, &venc->s_carr); + writel(venc_cfg->line21, &venc->line21); + writel(venc_cfg->ln_sel, &venc->ln_sel); + writel(venc_cfg->l21__wc_ctl, &venc->l21__wc_ctl); + writel(venc_cfg->htrigger_vtrigger, &venc->htrigger_vtrigger); + writel(venc_cfg->savid__eavid, &venc->savid__eavid); + writel(venc_cfg->flen__fal, &venc->flen__fal); + writel(venc_cfg->lal__phase_reset, &venc->lal__phase_reset); + writel(venc_cfg->hs_int_start_stop_x, + &venc->hs_int_start_stop_x); + writel(venc_cfg->hs_ext_start_stop_x, + &venc->hs_ext_start_stop_x); + writel(venc_cfg->vs_int_start_x, &venc->vs_int_start_x); + writel(venc_cfg->vs_int_stop_x__vs_int_start_y, + &venc->vs_int_stop_x__vs_int_start_y); + writel(venc_cfg->vs_int_stop_y__vs_ext_start_x, + &venc->vs_int_stop_y__vs_ext_start_x); + writel(venc_cfg->vs_ext_stop_x__vs_ext_start_y, + &venc->vs_ext_stop_x__vs_ext_start_y); + writel(venc_cfg->vs_ext_stop_y, &venc->vs_ext_stop_y); + writel(venc_cfg->avid_start_stop_x, &venc->avid_start_stop_x); + writel(venc_cfg->avid_start_stop_y, &venc->avid_start_stop_y); + writel(venc_cfg->fid_int_start_x__fid_int_start_y, + &venc->fid_int_start_x__fid_int_start_y); + writel(venc_cfg->fid_int_offset_y__fid_ext_start_x, + &venc->fid_int_offset_y__fid_ext_start_x); + writel(venc_cfg->fid_ext_start_y__fid_ext_offset_y, + &venc->fid_ext_start_y__fid_ext_offset_y); + writel(venc_cfg->tvdetgp_int_start_stop_x, + &venc->tvdetgp_int_start_stop_x); + writel(venc_cfg->tvdetgp_int_start_stop_y, + &venc->tvdetgp_int_start_stop_y); + writel(venc_cfg->gen_ctrl, &venc->gen_ctrl); + writel(venc_cfg->output_control, &venc->output_control); + writel(venc_cfg->dac_b__dac_c, &venc->dac_b__dac_c); + + /* Configure DSS for VENC Settings */ + writel(VENC_DSS_CONFIG, &dss->control); + + /* Configure height and width for Digital out */ + writel(((height << DIG_LPP_SHIFT) | width), &dispc->size_dig); +} + +/* + * Configure Panel Specific Parameters + */ +void omap3_dss_panel_config(const struct panel_config *panel_cfg) +{ + struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE; + + writel(panel_cfg->timing_h, &dispc->timing_h); + writel(panel_cfg->timing_v, &dispc->timing_v); + writel(panel_cfg->pol_freq, &dispc->pol_freq); + writel(panel_cfg->divisor, &dispc->divisor); + writel(panel_cfg->lcd_size, &dispc->size_lcd); + writel((panel_cfg->load_mode << FRAME_MODE_SHIFT), &dispc->config); + writel(((panel_cfg->panel_type << TFTSTN_SHIFT) | + (panel_cfg->data_lines << DATALINES_SHIFT)), &dispc->control); + writel(panel_cfg->panel_color, &dispc->default_color0); +} + +/* + * Enable LCD and DIGITAL OUT in DSS + */ +void omap3_dss_enable(void) +{ + struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE; + u32 l = 0; + + l = readl(&dispc->control); + l |= DISPC_ENABLE; + writel(l, &dispc->control); +} diff --git a/include/common.h b/include/common.h index 12a10741bd..bd10f31f84 100644 --- a/include/common.h +++ b/include/common.h @@ -616,6 +616,7 @@ ulong lcd_setmem (ulong); ulong video_setmem (ulong); /* arch/$(ARCH)/lib/cache.c */ +void enable_caches(void); void flush_cache (unsigned long, unsigned long); void flush_dcache_all(void); void flush_dcache_range(unsigned long start, unsigned long stop); diff --git a/include/configs/B2.h b/include/configs/B2.h deleted file mode 100644 index e181fa88bf..0000000000 --- a/include/configs/B2.h +++ /dev/null @@ -1,216 +0,0 @@ -/* - * (C) Copyright 2004 - * DAVE Srl - * - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * Configuation settings for the B2 board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM7 1 /* This is a ARM7 CPU */ -#define CONFIG_B2 1 /* on an B2 Board */ -#define CONFIG_ARM_THUMB 1 /* this is an ARM7TDMI */ -#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ -#define CONFIG_SYS_ICACHE_OFF -#define CONFIG_SYS_DCACHE_OFF -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_S3C44B0_CLOCK_SPEED 75 /* we have a 75Mhz S3C44B0*/ - - -#undef CONFIG_USE_IRQ /* don't need them anymore */ - - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ -#define CONFIG_ENV_SIZE 1024 /* 1024 bytes may be used for env vars*/ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024 ) - -/* - * Hardware drivers - */ -#define CONFIG_LAN91C96 -#define CONFIG_LAN91C96_BASE 0x04000300 /* base address */ -#define CONFIG_SMC_USE_32_BIT -#undef CONFIG_SHOW_ACTIVITY -#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ - -/* - * select serial console configuration - */ -#define CONFIG_S3C44B0_SERIAL -#define CONFIG_SERIAL1 1 /* we use Serial line 1 */ - -#define CONFIG_S3C44B0_I2C -#define CONFIG_RTC_S3C44B0 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DATE -#define CONFIG_CMD_ELF -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C - -#define CONFIG_NET_MULTI -#define CONFIG_BOOTDELAY 5 -#define CONFIG_ETHADDR 00:50:c2:1e:af:fb -#define CONFIG_BOOTARGS "setenv bootargs root=/dev/ram ip=192.168.0.70:::::eth0:off \ - ether=25,0,0,0,eth0 ethaddr=00:50:c2:1e:af:fb" -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_IPADDR 192.168.0.70 -#define CONFIG_SERVERIP 192.168.0.23 -#define CONFIG_BOOTFILE "B2-rootfs/usr/B2-zImage.u-boot" -#define CONFIG_BOOTCOMMAND "bootm 20000 f0000" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0C400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x0c700000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* 1 kHz */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */ -#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ -#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ -#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ -/* - * The following defines are added for buggy IOP480 byte interface. - * All other boards should use the standard values (CPCI405 etc.) - */ -#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */ -#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */ -#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -/*----------------------------------------------------------------------- - * Environment Variable setup - */ -#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#define CONFIG_ENV_OFFSET 0x0 /* environment starts at the beginning of the EEPROM */ - -/*----------------------------------------------------------------------- - * I2C EEPROM (STM24C02W6) for environment - */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0xFE - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0xA8 /* EEPROM STM24C02W6 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -/*#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07*/ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ - /* 16 byte page write mode using*/ - /* last 4 bits of the address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -/* Flash banks JFFS2 should use */ -/* -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#define CONFIG_SYS_JFFS2_FIRST_SECTOR 2 -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 -*/ - -/* - Linux TAGs (see arch/arm/lib/armlinux.c) -*/ -#define CONFIG_CMDLINE_TAG -#undef CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#endif /* __CONFIG_H */ diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 743768e0f5..e23ca45dd5 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -93,8 +93,9 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} +#define CONFIG_GENERIC_MMC 1 #define CONFIG_MMC 1 -#define CONFIG_OMAP3_MMC 1 +#define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1 /* @@ -191,16 +192,17 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "console=ttyS2,115200n8\0" \ + "mmcdev=0\0" \ "mmcargs=setenv bootargs console=${console} " \ "root=/dev/mmcblk0p2 rw " \ "rootfstype=ext3 rootwait\0" \ "nandargs=setenv bootargs console=${console} " \ "root=/dev/mtdblock4 rw " \ "rootfstype=jffs2\0" \ - "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source ${loadaddr}\0" \ - "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ @@ -210,7 +212,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc init; then " \ + "if mmc rescan ${mmcdev}; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 6c5728db59..72dd6f02ce 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -93,7 +93,8 @@ #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} #define CONFIG_MMC 1 -#define CONFIG_OMAP3_MMC 1 +#define CONFIG_GENERIC_MMC 1 +#define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1 /* @@ -190,16 +191,17 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "console=ttyO2,115200n8\0" \ + "mmcdev=0\0" \ "mmcargs=setenv bootargs console=${console} " \ "root=/dev/mmcblk0p2 rw " \ "rootfstype=ext3 rootwait\0" \ "nandargs=setenv bootargs console=${console} " \ "root=/dev/mtdblock4 rw " \ "rootfstype=jffs2\0" \ - "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source ${loadaddr}\0" \ - "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ @@ -209,7 +211,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc init; then " \ + "if mmc rescan ${mmcdev}; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h deleted file mode 100644 index d0d0998d6e..0000000000 --- a/include/configs/armadillo.h +++ /dev/null @@ -1,157 +0,0 @@ -/* - * (C) Copyright 2000 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * Configuation settings for the EP7312 board. - * - * Modified to work on Armadillo HT1070 ARM720T board - * (C) Copyright 2005 Rowel Atienza rowel@diwalabs.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#undef CONFIG_SKIP_LOWLEVEL_INIT - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM7 1 /* This is a ARM7 CPU */ -#define CONFIG_ARMADILLO 1 /* on an Armadillo Board */ -#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */ -#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ - -#undef CONFIG_USE_IRQ /* don't need them anymore */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -#define CONFIG_NET_MULTI -#define CONFIG_CS8900 /* we have a CS8900 on-board */ -#define CONFIG_CS8900_BASE 0x20000300 /* armadillo board */ -#define CONFIG_CS8900_BUS16 -#undef CONFIG_CS8900_BUS32 - -/* - * select serial console configuration - */ -#define CONFIG_CLPS7111_SERIAL -#define CONFIG_SERIAL1 1 /* we use Serial line 1 */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "root=/dev/ram0 rootfstype=ext2 console=ttyAM0,115200" - -#define CONFIG_BOOTCOMMAND "bootm 40000 180000" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "ARMADILLO # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00040000 /* default load address for armadillo: kernel img is here*/ - -#define CONFIG_SYS_HZ 2000 /* decrementer freq: 2 kHz */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB armadillo SDRAM */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* Addr of Environment Sector */ -#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#endif /* __CONFIG_H */ diff --git a/include/configs/assabet.h b/include/configs/assabet.h deleted file mode 100644 index dc9bd88aca..0000000000 --- a/include/configs/assabet.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * 2004 (c) MontaVista Software, Inc. - * - * Configuation settings for the Intel Assabet board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_SA1110 1 /* This is an SA1100 CPU */ -#define CONFIG_ASSABET 1 /* on an Intel Assabet Board */ - -#undef CONFIG_USE_IRQ -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -#define CONFIG_NET_MULTI -#define CONFIG_LAN91C96 /* we have an SMC9194 on-board */ -#define CONFIG_LAN91C96_BASE 0x18000000 - -/* - * select serial console configuration - */ -#define CONFIG_SA1100_SERIAL -#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on Intel Assabet */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "console=ttySA0,115200n8 root=/dev/nfs ip=bootp" -#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" -#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "Intel Assabet # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xc0000000 /* default load address */ - -#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ -#define CONFIG_SYS_CPUSPEED 0x0a /* set core clock to 206MHz */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */ -#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ -#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */ -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 KB for Monitor */ - -#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_RAMSTART -#endif - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_FLASH_SIZE PHYS_FLASH_SIZE -#define CONFIG_SYS_FLASH_CFI 1 /* flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* use common cfi driver */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */ -#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max # of sectors on one chip */ -#undef CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } - -#define CONFIG_ENV_IS_IN_FLASH 1 - -#if defined(CONFIG_ENV_IS_IN_FLASH) -#define CONFIG_ENV_IN_OWN_SECTOR 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE) -#define CONFIG_ENV_SIZE PHYS_FLASH_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h deleted file mode 100644 index 49c923f163..0000000000 --- a/include/configs/at91cap9adk.h +++ /dev/null @@ -1,218 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian.pop@leadtechdesign.com> - * Lead Tech Design <www.leadtechdesign.com> - * - * Configuation settings for the AT91CAP9ADK board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AT91_LEGACY - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000 - -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ -#define CONFIG_AT91CAP9 1 /* It's an Atmel AT91CAP9 SoC */ -#define CONFIG_AT91CAP9ADK 1 /* on an AT91CAP9ADK Board */ -#define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* - * Hardware drivers - */ -#define CONFIG_AT91_GPIO 1 -#define CONFIG_ATMEL_USART 1 -#undef CONFIG_USART0 -#undef CONFIG_USART1 -#undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ - -/* LCD */ -#define CONFIG_LCD 1 -#define LCD_BPP LCD_COLOR8 -#define CONFIG_LCD_LOGO 1 -#undef LCD_TEST_PATTERN -#define CONFIG_LCD_INFO 1 -#define CONFIG_LCD_INFO_BELOW_LOGO 1 -#define CONFIG_SYS_WHITE_ON_BLACK 1 -#define CONFIG_ATMEL_LCD 1 -#define CONFIG_ATMEL_LCD_BGR555 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 - -/* LED */ -#define CONFIG_AT91_LED -#define CONFIG_RED_LED AT91_PIN_PC29 /* this is the power led */ -#define CONFIG_GREEN_LED AT91_PIN_PA10 /* this is the user1 led */ -#define CONFIG_YELLOW_LED AT91_PIN_PA11 /* this is the user1 led */ - -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1 - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SOURCE - -#define CONFIG_CMD_PING 1 -#define CONFIG_CMD_DHCP 1 -#define CONFIG_CMD_NAND 1 -#define CONFIG_CMD_USB 1 - -/* SDRAM: Careful: this supposes an AT91CAP-MEM33 expansion card */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x70000000 -#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ - -/* DataFlash */ -#define CONFIG_ATMEL_DATAFLASH_SPI -#define CONFIG_HAS_DATAFLASH 1 -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -#define AT91_SPI_CLK 15000000 -#define DATAFLASH_TCSS (0x1a << 16) -#define DATAFLASH_TCHS (0x1 << 24) - -/* NOR flash */ -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#define PHYS_FLASH_1 0x10000000 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -/* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -/* our CLE is AD22 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 - -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_DBW_8 1 - -#endif - -/* Ethernet */ -#define CONFIG_MACB 1 -#define CONFIG_RMII 1 -#define CONFIG_NET_MULTI 1 -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R 1 - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* AT91_BASE_UHP */ -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91cap9" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE 1 -#define CONFIG_CMD_FAT 1 - -#define CONFIG_SYS_LOAD_ADDR 0x72000000 /* load address */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END 0x73e00000 - -#define CONFIG_SYS_USE_DATAFLASH 1 -#undef CONFIG_SYS_USE_NORFLASH - -#ifdef CONFIG_SYS_USE_DATAFLASH - -/* bootstrap + u-boot + env + linux in dataflash */ -#define CONFIG_ENV_IS_IN_DATAFLASH 1 -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) -#define CONFIG_ENV_OFFSET 0x4200 -#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x4200 -#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x72000000 0x210000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock1 " \ - "mtdparts=physmap-flash.0:-(nor);" \ - "atmel_nand:-(root) " \ - "rw rootfstype=jffs2" - -#else - -/* bootstrap + u-boot + env + linux in norflash */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_SYS_MONITOR_BASE (PHYS_FLASH_1 + 0x8000) -#define CONFIG_ENV_OFFSET 0x4000 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_BOOTCOMMAND "cp.b 0x10040000 0x72000000 0x200000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock4 " \ - "mtdparts=physmap-flash.0:16k(bootstrap)ro,"\ - "16k(env),224k(uboot)ro,-(linux);" \ - "atmel_nand:-(root) " \ - "rw rootfstype=jffs2" - -#endif - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } - -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(CONFIG_ENV_SIZE + 128*1024, 0x1000) - -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - -#endif diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h deleted file mode 100644 index 15de310304..0000000000 --- a/include/configs/at91rm9200dk.h +++ /dev/null @@ -1,202 +0,0 @@ -/* - * Rick Bronson <rick@efn.org> - * - * Configuration settings for the AT91RM9200DK board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AT91_LEGACY - -/* ARM asynchronous clock */ -#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ -#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ -/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */ - -#define AT91_SLOW_CLOCK 32768 /* slow clock */ - -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ -#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define USE_920T_MMU 1 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 -/* flash */ -#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 -#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ -#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ - -/* sdram */ -#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 -#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 -#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ -#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -#define CONFIG_BAUDRATE 115200 - -/* - * Hardware drivers - */ - -/* define one of these to choose the DBGU, USART0 or USART1 as console */ -#define CONFIG_AT91RM9200_USART -#define CONFIG_DBGU -#undef CONFIG_USART0 -#undef CONFIG_USART1 - -#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ - -#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ - -#define CONFIG_BOOTDELAY 3 -/* #define CONFIG_ENV_OVERWRITE 1 */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII - -#include <asm/arch/AT91RM9200.h> /* needed for port definitions */ - -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 - -#define CONFIG_NET_MULTI 1 -#ifdef CONFIG_NET_MULTI -#define CONFIG_DRIVER_AT91EMAC 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#else -#define CONFIG_DRIVER_ETHER 1 -#endif - -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_AT91C_USE_RMII - -/* AC Characteristics */ -/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ -#define DATAFLASH_TCSS (0xC << 16) -#define DATAFLASH_TCHS (0x1 << 24) - -#define CONFIG_HAS_DATAFLASH 1 -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 -#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384 -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ - -#define PHYS_FLASH_1 0x10000000 -#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#undef CONFIG_ENV_IS_IN_DATAFLASH - -#ifdef CONFIG_ENV_IS_IN_DATAFLASH -#define CONFIG_ENV_OFFSET 0x20000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */ -#else -#define CONFIG_ENV_IS_IN_FLASH 1 -#ifdef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */ -#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */ -#else -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */ -#define CONFIG_ENV_SIZE 0x10000 /* sectors are 64K here */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ -#endif /* CONFIG_ENV_IS_IN_DATAFLASH */ - - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -#ifdef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */ -#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) -#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */ -#else -#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */ -#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1 -#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 } - -#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ - /* AT91C_TC_TIMER_DIV1_CLOCK */ - -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - -#endif diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index de74dcf18b..b08cbf2345 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -27,48 +27,60 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <asm/hardware.h> + #define CONFIG_AT91_LEGACY +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000 - -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ -#ifdef CONFIG_AT91SAM9M10G45EK -#define CONFIG_AT91SAM9M10G45 1 /* It's an Atmel AT91SAM9M10G45 SoC*/ -#else -#define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC*/ -#endif +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_AT91SAM9M10G45EK +#define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG #define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DISPLAY_CPUINFO + +/* general purpose I/O */ +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ +#define CONFIG_AT91_GPIO +#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS + +/* + * This needs to be defined for the OHCI code to work but it is defined as + * ATMEL_ID_UHPHS in the CPU specific header files. + */ +#define ATMEL_ID_UHP ATMEL_ID_UHPHS /* - * Hardware drivers + * Specify the clock enable bit in the PMC_SCER register. */ -#define CONFIG_AT91_GPIO 1 -#define CONFIG_ATMEL_USART 1 -#undef CONFIG_USART0 -#undef CONFIG_USART1 -#undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ +#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP /* LCD */ -#define CONFIG_LCD 1 +#define CONFIG_LCD #define LCD_BPP LCD_COLOR8 -#define CONFIG_LCD_LOGO 1 +#define CONFIG_LCD_LOGO #undef LCD_TEST_PATTERN -#define CONFIG_LCD_INFO 1 -#define CONFIG_LCD_INFO_BELOW_LOGO 1 -#define CONFIG_SYS_WHITE_ON_BLACK 1 -#define CONFIG_ATMEL_LCD 1 -#define CONFIG_ATMEL_LCD_RGB565 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +#define CONFIG_LCD_INFO +#define CONFIG_LCD_INFO_BELOW_LOGO +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_ATMEL_LCD +#define CONFIG_ATMEL_LCD_RGB565 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* board specific(not enough SRAM) */ #define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000 @@ -82,10 +94,10 @@ /* * BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1 +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. @@ -98,44 +110,29 @@ #undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_LOADS -#define CONFIG_CMD_PING 1 -#define CONFIG_CMD_DHCP 1 -#define CONFIG_CMD_NAND 1 -#define CONFIG_CMD_USB 1 +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NAND +#define CONFIG_CMD_USB /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x70000000 -#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ - -/* DataFlash */ -#ifdef CONFIG_ATMEL_SPI -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -#define CONFIG_SPI_FLASH 1 -#define CONFIG_SPI_FLASH_ATMEL 1 -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 -#endif +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 +#define CONFIG_SYS_SDRAM_SIZE 0x08000000 -/* NOR flash, if populated */ -#ifndef CONFIG_CMD_NAND -#define CONFIG_SYS_NO_FLASH 1 -#else -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#define PHYS_FLASH_1 0x10000000 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#endif +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) + +/* No NOR flash */ +#define CONFIG_SYS_NO_FLASH /* NAND flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_NAND_MAX_CHIPS 1 #define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_DBW_8 1 +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +#define CONFIG_SYS_NAND_DBW_8 /* our ALE is AD21 */ #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our CLE is AD22 */ @@ -146,68 +143,52 @@ #endif /* Ethernet */ -#define CONFIG_MACB 1 -#define CONFIG_RMII 1 -#define CONFIG_NET_MULTI 1 +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_MULTI #define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R 1 +#define CONFIG_RESET_PHY_R /* USB */ #define CONFIG_USB_ATMEL -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* AT91SAM9G45_UHP_OHCI_BASE */ -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45" +#define CONFIG_USB_OHCI_NEW +#define CONFIG_DOS_PARTITION +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_HCI +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE 1 - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END 0x23e00000 +#define CONFIG_USB_STORAGE -#ifdef CONFIG_SYS_USE_DATAFLASH +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ -/* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_ENV_IS_IN_SPI_FLASH 1 -#define CONFIG_SYS_MONITOR_BASE (0xC0000000 + 0x8400) -#define CONFIG_ENV_OFFSET 0x4200 -#define CONFIG_ENV_ADDR (0xC0000000 + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x4200 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock0 " \ - "mtdparts=atmel_nand:-(root) "\ - "rw rootfstype=jffs2" +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END 0x23e00000 -#else /* CONFIG_SYS_USE_NANDFLASH */ - -/* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_ENV_IS_IN_NAND 1 +/* bootstrap + u-boot + env in nandflash */ +#define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0x60000 #define CONFIG_ENV_OFFSET_REDUND 0x80000 -#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock5 " \ - "mtdparts=atmel_nand:128k(bootstrap)ro, \ - 256k(uboot)ro,128k(env1)ro,128k(env2)ro, \ - 2M(linux),-(root) " \ - "rw rootfstype=jffs2" - -#endif - -#define CONFIG_BAUDRATE 115200 +#define CONFIG_ENV_SIZE 0x20000 + +#define CONFIG_BOOTCOMMAND "nand read 0x70000000 0x100000 0x200000;" \ + "bootm 0x70000000" +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "root=/dev/mtdblock5 " \ + "mtdparts=atmel_nand:128k(bootstrap)ro," \ + "256k(uboot)ro,128k(env1)ro,128k(env2)ro," \ + "2M@1M(linux),-(root) " \ + "rw rootfstype=jffs2" + +#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CONFIG_SYS_PROMPT "U-Boot> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 16a5f5b1ed..496a904f2b 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -108,8 +108,9 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} +#define CONFIG_GENERIC_MMC 1 #define CONFIG_MMC 1 -#define CONFIG_OMAP3_MMC 1 +#define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1 /* DDR - I use Micron DDR */ diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h deleted file mode 100644 index a1976350e4..0000000000 --- a/include/configs/cmc_pu2.h +++ /dev/null @@ -1,238 +0,0 @@ -/* - * 2004-2005 Gary Jennejohn <garyj@denx.de> - * - * Configuration settings for the CMC PU2 board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AT91_LEGACY - -/* ARM asynchronous clock */ -#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ -#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK/3) /* peripheral clock */ - -#define AT91_SLOW_CLOCK 32768 /* slow clock */ - -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ -#define CONFIG_CMC_PU2 1 /* on an CMC_PU2 Board */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define USE_920T_MMU 1 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 -/* flash */ -#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 -#define CONFIG_SYS_SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define CONFIG_SYS_PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */ -#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */ - -/* sdram */ -#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 -#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 -#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_CR_VAL 0x3399c1d4 /* set up the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ -#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -#define CONFIG_BAUDRATE 9600 - -/* - * Hardware drivers - */ - -/* define one of these to choose the DBGU, USART0 or USART1 as console */ -#define CONFIG_AT91RM9200_USART -#undef CONFIG_DBGU -#define CONFIG_USART0 -#undef CONFIG_USART1 - -#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ - -#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ - -#define CONFIG_HARD_I2C - -#ifdef CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 0 /* not used */ -#define CONFIG_SYS_I2C_SLAVE 0 /* not used */ -#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x32 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW -#else -#define CONFIG_TIMESTAMP -#endif -/* still about 20 kB free with this defined */ -#define CONFIG_SYS_LONGHELP - -#define CONFIG_BOOTDELAY 1 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP - -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_MISC - -#if defined(CONFIG_HARD_I2C) - #define CONFIG_CMD_DATE - #define CONFIG_CMD_EEPROM - #define CONFIG_CMD_I2C -#endif - - -#define CONFIG_MISC_INIT_R -#define CONFIG_SYS_LONGHELP - -#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ -#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ - -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 - -#define CONFIG_NET_MULTI 1 -#ifdef CONFIG_NET_MULTI -#define CONFIG_DRIVER_AT91EMAC 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#else -#define CONFIG_DRIVER_ETHER 1 -#endif -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_AT91C_USE_RMII - -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 -#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384 -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ - -#define PHYS_FLASH_1 0x10000000 -#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_FLASH_ERASE_TOUT (11 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT ( 2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x20000 /* after u-boot.bin */ -#define CONFIG_ENV_SECT_SIZE (64 << 10) /* sectors are 64 kB */ -#define CONFIG_ENV_SIZE (16 << 10) /* Use only 16 kB */ - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } - -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */ - /* AT91C_TC_TIMER_DIV1_CLOCK */ - -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "net_nfs=tftp ${loadaddr} ${bootfile};run nfsargs addip addcons " \ - "addmtd;bootm\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "net_cramfs=tftp ${loadaddr} ${bootfile}; run flashargs addip " \ - "addcons addmtd; bootm\0" \ - "flash_cramfs=run flashargs addip addcons addmtd; bootm 10030000\0" \ - "flashargs=setenv bootargs root=/dev/mtdblock3 ro\0" \ - "addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \ - "${hostname}::off\0" \ - "addcons=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \ - "addmtd=setenv bootargs ${bootargs} mtdparts=cmc_pu2:128k(uboot)ro," \ - "64k(environment),768k(linux),4096k(root),-\0" \ - "load=tftp ${loadaddr} ${loadfile}\0" \ - "update=protect off 10000000 1001ffff;erase 10000000 1001ffff; " \ - "cp.b ${loadaddr} 10000000 ${filesize};" \ - "protect on 10000000 1001ffff\0" \ - "updatel=era 10030000 100effff;tftp ${loadaddr} ${bootfile}; " \ - "cp.b ${loadaddr} 10030000 ${filesize}\0" \ - "updatec=era 100f0000 104effff;tftp ${loadaddr} ${cramfsimage}; " \ - "cp.b ${loadaddr} 100f0000 ${filesize}\0" \ - "updatej=era 104f0000 107fffff;tftp ${loadaddr} ${jffsimage}; " \ - "cp.b ${loadaddr} 104f0000 ${filesize}\0" \ - "cramfsimage=cramfs_cmc-pu2.img\0" \ - "jffsimage=jffs2_cmc-pu2.img\0" \ - "loadfile=u-boot_cmc-pu2.bin\0" \ - "bootfile=uImage_cmc-pu2\0" \ - "loadaddr=0x20800000\0" \ - "hostname=CMC-TC-PU2\0" \ - "bootcmd=run dhcp_start;run flash_cramfs\0" \ - "autoload=n\0" \ - "dhcp_start=echo no DHCP\0" \ - "ipaddr=192.168.0.190\0" -#endif /* __CONFIG_H */ diff --git a/include/configs/csb226.h b/include/configs/csb226.h index dcfbc6e686..934dfcdef2 100644 --- a/include/configs/csb226.h +++ b/include/configs/csb226.h @@ -141,7 +141,7 @@ /* ^^ Run Mode Speed = 2x Mem Speed */ /* ^^ Turbo Mode Sp. = 1x Run M. Sp. */ -#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128 KiB */ +#define CONFIG_SYS_MONITOR_LEN 0x1c000 /* 112 KiB */ /* valid baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } diff --git a/include/configs/csb637.h b/include/configs/csb637.h deleted file mode 100644 index 7a85d65302..0000000000 --- a/include/configs/csb637.h +++ /dev/null @@ -1,196 +0,0 @@ -/* - * (C) Copyright 2005 REA Elektronik GmbH <www.rea.de> - * Anders Larsen <alarsen@rea.de> - * - * Configuation settings for the Cogent CSB637 board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AT91_LEGACY - -/* ARM asynchronous clock */ -#define AT91C_MAIN_CLOCK 184320000 /* from 3.6864 MHz crystal (3686400 * 50) */ -#define AT91C_MASTER_CLOCK 46080000 /* (AT91C_MAIN_CLOCK/4) peripheral clock */ - -#define AT91_SLOW_CLOCK 32768 /* slow clock */ - -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ -#define CONFIG_CSB637 1 /* on a CSB637 board */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define USE_920T_MMU 1 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 -/* flash */ -#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 -#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define CONFIG_SYS_PLLAR_VAL 0x2031BE01 /* 184.320000 MHz for PCK */ -#define CONFIG_SYS_PLLBR_VAL 0x128A3E19 /* 47.996928 MHz (divider by 2 for USB) */ -#define CONFIG_SYS_MCKR_VAL 0x00000302 /* PCK/4 = MCK Master Clock = 46.080000 MHz from PLLA */ - -/* sdram */ -#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 -#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 -#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_CR_VAL 0x21914159 /* set up the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ -#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_AT91C_BRGR_DIVISOR 75 /* hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */ - -/* - * Hardware drivers - */ - -/* define one of these to choose the DBGU, USART0 or USART1 as console */ -#define CONFIG_AT91RM9200_USART -#define CONFIG_DBGU -#undef CONFIG_USART0 -#undef CONFIG_USART1 - -#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ - -#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ - -#define CONFIG_BOOTDELAY 3 -/* #define CONFIG_ENV_OVERWRITE 1 */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_PING - - -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x4000000 /* 64 megs */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 512*1024 - 4 -#define CONFIG_SYS_ALT_MEMTEST 1 -#define CONFIG_SYS_MEMTEST_SCRATCH CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 4 - -#define CONFIG_NET_MULTI 1 -#ifdef CONFIG_NET_MULTI -#define CONFIG_DRIVER_AT91EMAC 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#else -#define CONFIG_DRIVER_ETHER 1 -#endif -#define CONFIG_NET_RETRY_COUNT 20 -#undef CONFIG_AT91C_USE_RMII - -#undef CONFIG_HAS_DATAFLASH -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 0 -#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384 -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ - -/* - * FLASH Device configuration - */ -#define PHYS_FLASH_1 0x10000000 -#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_FLASH_CFI 1 /* flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* use common cfi driver */ -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */ -#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware flash protection */ -#define CONFIG_SYS_MAX_FLASH_SECT 64 - -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#define CONFIG_SYS_JFFS2_FIRST_SECTOR 3 -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - -#undef CONFIG_ENV_IS_IN_DATAFLASH - -#ifdef CONFIG_ENV_IS_IN_DATAFLASH -#define CONFIG_ENV_OFFSET 0x20000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */ -#else -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* after u-boot.bin */ -#define CONFIG_ENV_SIZE 0x20000 /* sectors are 128K here */ -#endif /* CONFIG_ENV_IS_IN_DATAFLASH */ - - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } - -#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ - /* AT91C_TC_TIMER_DIV1_CLOCK */ - -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - -#endif diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index bbb5a9b160..f6068a2b34 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -29,6 +29,7 @@ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_USE_SPIFLASH + /* * SoC Configuration */ @@ -42,6 +43,9 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_TEXT_BASE 0xc1080000 +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_SYS_L2CACHE_OFF /* * Memory Info @@ -75,6 +79,7 @@ #define CONFIG_SPI #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_WINBOND #define CONFIG_DAVINCI_SPI #define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE #define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) @@ -126,6 +131,22 @@ #define CONFIG_NET_MULTI #endif +#ifdef CONFIG_USE_NOR +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ +#define CONFIG_SYS_FLASH_SECT_SZ (128 << 10) /* 128KB */ +#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ * 3) +#define CONFIG_ENV_SIZE (10 << 10) /* 10KB */ +#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE +#define PHYS_FLASH_SIZE (8 << 20) /* Flash size 8MB */ +#define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\ + + 3) +#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ +#endif + #ifdef CONFIG_USE_SPIFLASH #undef CONFIG_ENV_IS_IN_FLASH #undef CONFIG_ENV_IS_IN_NAND @@ -139,8 +160,9 @@ /* * U-Boot general configuration */ +#define CONFIG_MISC_INIT_R #define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_PROMPT "DA850-evm > " /* Command Prompt */ +#define CONFIG_SYS_PROMPT "U-Boot > " /* Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ @@ -159,12 +181,14 @@ * Linux Information */ #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) +#define CONFIG_HWCONFIG /* enable hwconfig */ #define CONFIG_CMDLINE_TAG #define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_BOOTARGS \ "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp" #define CONFIG_BOOTDELAY 3 +#define CONFIG_EXTRA_ENV_SETTINGS "hwconfig=dsp:wake=yes" /* * U-Boot commands diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index 28250506a9..28b9db9a70 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -33,6 +33,9 @@ #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ #define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM365 +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_SYS_L2CACHE_OFF /* Memory Info */ #define CONFIG_NR_DRAM_BANKS 1 @@ -166,7 +169,7 @@ /* U-Boot general configuration */ #undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_PROMPT "DM365 EVM # " /* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT "DM36x EVM # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE /* Print buffer size */ \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index 45214fa42a..086a2d7d40 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -60,6 +60,9 @@ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM644X +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_SYS_L2CACHE_OFF /*====================================================*/ /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ /* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index cf77606fe0..710092de36 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -98,8 +98,9 @@ 115200} /* MMC */ +#define CONFIG_GENERIC_MMC 1 #define CONFIG_MMC 1 -#define CONFIG_OMAP3_MMC 1 +#define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1 /* I2C */ @@ -181,6 +182,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "console=ttyS2,115200n8\0" \ + "mmcdev=0\0" \ "vram=12M\0" \ "dvimode=1024x768MR-16@60\0" \ "defaultdisplay=dvi\0" \ @@ -213,10 +215,10 @@ "${kernelopts} " \ "dnsip1=${dnsip} " \ "dnsip2=${dnsip2}\0" \ - "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source ${loadaddr}\0" \ - "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ "eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ @@ -229,7 +231,7 @@ "dhcp ${loadaddr}; " \ "run netargs; " \ "bootm ${loadaddr}\0" \ - "autoboot=if mmc init 0; then " \ + "autoboot=if mmc rescan ${mmcdev}; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/dig297.h b/include/configs/dig297.h index b68f07383a..0e05df3b5e 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -97,8 +97,9 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} -#define CONFIG_MMC -#define CONFIG_OMAP3_MMC +#define CONFIG_GENERIC_MMC 1 +#define CONFIG_MMC 1 +#define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION /* DDR - I use Micron DDR */ diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h deleted file mode 100644 index 19b76321e6..0000000000 --- a/include/configs/edb93xx.h +++ /dev/null @@ -1,269 +0,0 @@ -/* - * U-boot - Configuration file for Cirrus Logic EDB93xx boards - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#ifdef CONFIG_edb9301 -#define CONFIG_EDB9301 -#elif defined(CONFIG_edb9302) -#define CONFIG_EDB9302 -#elif defined(CONFIG_edb9302a) -#define CONFIG_EDB9302A -#elif defined(CONFIG_edb9307) -#define CONFIG_EDB9307 -#elif defined(CONFIG_edb9307a) -#define CONFIG_EDB9307A -#elif defined(CONFIG_edb9312) -#define CONFIG_EDB9312 -#elif defined(CONFIG_edb9315) -#define CONFIG_EDB9315 -#elif defined(CONFIG_edb9315a) -#define CONFIG_EDB9315A -#else -#error "no board defined" -#endif - -/* Initial environment and monitor configuration options. */ -#define CONFIG_BOOTDELAY 2 -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_BOOTARGS "root=/dev/nfs console=ttyAM0,115200 ip=dhcp" -#define CONFIG_BOOTFILE "edb93xx.img" - -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -#ifdef CONFIG_EDB9301 -#define CONFIG_EP9301 -#define CONFIG_MACH_TYPE MACH_TYPE_EDB9301 -#define CONFIG_SYS_PROMPT "EDB9301> " -#define CONFIG_ENV_SECT_SIZE 0x00020000 -#elif defined(CONFIG_EDB9302) -#define CONFIG_EP9302 -#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302 -#define CONFIG_SYS_PROMPT "EDB9302> " -#define CONFIG_ENV_SECT_SIZE 0x00020000 -#elif defined(CONFIG_EDB9302A) -#define CONFIG_EP9302 -#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302A -#define CONFIG_SYS_PROMPT "EDB9302A> " -#define CONFIG_ENV_SECT_SIZE 0x00020000 -#elif defined(CONFIG_EDB9307) -#define CONFIG_EP9307 -#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307 -#define CONFIG_SYS_PROMPT "EDB9307> " -#define CONFIG_ENV_SECT_SIZE 0x00040000 -#elif defined(CONFIG_EDB9307A) -#define CONFIG_EP9307 -#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307A -#define CONFIG_SYS_PROMPT "EDB9307A> " -#define CONFIG_ENV_SECT_SIZE 0x00040000 -#elif defined(CONFIG_EDB9312) -#define CONFIG_EP9312 -#define CONFIG_MACH_TYPE MACH_TYPE_EDB9312 -#define CONFIG_SYS_PROMPT "EDB9312> " -#define CONFIG_ENV_SECT_SIZE 0x00040000 -#elif defined(CONFIG_EDB9315) -#define CONFIG_EP9315 -#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315 -#define CONFIG_SYS_PROMPT "EDB9315> " -#define CONFIG_ENV_SECT_SIZE 0x00040000 -#elif defined(CONFIG_EDB9315A) -#define CONFIG_EP9315 -#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315A -#define CONFIG_SYS_PROMPT "EDB9315A> " -#define CONFIG_ENV_SECT_SIZE 0x00040000 -#else -#error "no board defined" -#endif - -/* High-level configuration options */ -#define CONFIG_ARM920T 1 /* This is an ARM920T core... */ -#define CONFIG_EP93XX 1 /* in a Cirrus Logic 93xx SoC */ - -#define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */ -#define CONFIG_SYS_HZ 1000 /* decr freq: 1 ms ticks */ -#undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */ - -/* Monitor configuration */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_XIMG - -#undef CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_FAT -#define CONFIG_CMD_JFFS2 - -#define CONFIG_SYS_LONGHELP /* Enable "long" help in mon */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ -/* Print buffer size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -/* Boot argument buffer size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */ - -/* Serial port hardware configuration */ -#define CONFIG_PL010_SERIAL -#define CONFIG_CONS_INDEX 0 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} -#define CONFIG_SYS_SERIAL0 0x808C0000 -#define CONFIG_SYS_SERIAL1 0x808D0000 -#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \ - (void *)CONFIG_SYS_SERIAL1} - -/* Status LED */ -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED 1 -#define STATUS_LED_GREEN 0 -#define STATUS_LED_RED 1 -/* Green */ -#define STATUS_LED_BIT STATUS_LED_GREEN -#define STATUS_LED_STATE STATUS_LED_ON -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -/* Red */ -#define STATUS_LED_BIT1 STATUS_LED_RED -#define STATUS_LED_STATE1 STATUS_LED_OFF -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) -/* Optional value */ -#define STATUS_LED_BOOT STATUS_LED_BIT - -/* Network hardware configuration */ -#define CONFIG_DRIVER_EP93XX_MAC -#define CONFIG_MII_SUPPRESS_PREAMBLE -#define CONFIG_MII -#define CONFIG_PHY_ADDR 1 -#define CONFIG_NET_MULTI -#undef CONFIG_NETCONSOLE - -/* SDRAM configuration */ -#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) -/* - * EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75 - * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set - * the SROMLL bit on the processor, resulting in this non-contiguous memory map. - */ -#define CONFIG_NR_DRAM_BANKS 4 -#define PHYS_SDRAM_1 0x00000000 -#define PHYS_SDRAM_SIZE_1 0x00800000 -#define PHYS_SDRAM_2 0x01000000 -#define PHYS_SDRAM_SIZE_2 0x00800000 -#define PHYS_SDRAM_3 0x04000000 -#define PHYS_SDRAM_SIZE_3 0x00800000 -#define PHYS_SDRAM_4 0x05000000 -#define PHYS_SDRAM_SIZE_4 0x00800000 -#define CONFIG_EDB93XX_SDCS3 -#define CONFIG_SYS_MEMTEST_START 0x00100000 -#define CONFIG_SYS_MEMTEST_END 0x007fffff - -#elif defined(CONFIG_EDB9302A) -/* - * EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75 - * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set - * the SROMLL bit on the processor, resulting in this non-contiguous memory map. - */ -#define CONFIG_NR_DRAM_BANKS 4 -#define PHYS_SDRAM_1 0xc0000000 -#define PHYS_SDRAM_SIZE_1 0x00800000 -#define PHYS_SDRAM_2 0xc1000000 -#define PHYS_SDRAM_SIZE_2 0x00800000 -#define PHYS_SDRAM_3 0xc4000000 -#define PHYS_SDRAM_SIZE_3 0x00800000 -#define PHYS_SDRAM_4 0xc5000000 -#define PHYS_SDRAM_SIZE_4 0x00800000 -#define CONFIG_EDB93XX_SDCS0 -#define CONFIG_SYS_MEMTEST_START 0xc0100000 -#define CONFIG_SYS_MEMTEST_END 0xc07fffff - -#elif defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \ - defined(CONFIG_EDB9315) -/* - * The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of - * 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of - * 64 MB of SDRAM. - */ -#define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 0x00000000 -#define PHYS_SDRAM_SIZE_1 0x02000000 -#define PHYS_SDRAM_2 0x04000000 -#define PHYS_SDRAM_SIZE_2 0x02000000 -#define CONFIG_EDB93XX_SDCS3 -#define CONFIG_SYS_MEMTEST_START 0x00100000 -#define CONFIG_SYS_MEMTEST_END 0x01e00000 - -#elif defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A) -/* - * The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung - * K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM. - */ -#define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 0xc0000000 -#define PHYS_SDRAM_SIZE_1 0x02000000 -#define PHYS_SDRAM_2 0xc4000000 -#define PHYS_SDRAM_SIZE_2 0x02000000 -#define CONFIG_EDB93XX_SDCS0 -#define CONFIG_SYS_MEMTEST_START 0xc0100000 -#define CONFIG_SYS_MEMTEST_END 0xc1e00000 -#endif - -/* Default load address */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x01000000) - -/* Must match kernel config */ -#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) - -/* Run-time memory allocatons */ -#define CONFIG_STACKSIZE (128 * 1024) - -#if defined(CONFIG_USE_IRQ) -#define CONFIG_STACKSIZE_IRQ (4 * 1024) -#define CONFIG_STACKSIZE_FIQ (4 * 1024) -#endif - -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) - -/* ----------------------------------------------------------------------------- - * FLASH and environment organization - * - * The EDB9301 and EDB9302(a) have 1 bank of flash memory at 0x60000000 - * consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit data bus, - * for a total of 16 MB of CFI-compatible flash. - * - * The EDB9307(a), EDB9312, and EDB9315(a) have 1 bank of flash memory at - * 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit - * data bus, for a total of 32 MB of CFI-compatible flash. - * - * EDB9301/02(a) EDB9307(a)/12/15(a) - * 0x60000000 - 0x0003FFFF u-boot u-boot - * 0x60040000 - 0x0005FFFF environment #1 environment #1 - * 0x60060000 - 0x0007FFFF environment #2 environment #1 (continued) - * 0x60080000 - 0x0009FFFF unused environment #2 - * 0x600A0000 - 0x000BFFFF unused environment #2 (continued) - * 0x600C0000 - 0x00FFFFFF unused unused - * 0x61000000 - 0x01FFFFFF not present unused - */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 128 - -#define PHYS_FLASH_1 0x60000000 -#define CONFIG_SYS_FLASH_BASE (PHYS_FLASH_1) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) - -#define CONFIG_ENV_OVERWRITE /* Vendor params unprotected */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR 0x60040000 - -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) - -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -#endif /* !defined (__CONFIG_H) */ diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h index 7d3363aa79..b90e34299f 100644 --- a/include/configs/efikamx.h +++ b/include/configs/efikamx.h @@ -40,8 +40,6 @@ #define CONFIG_SYS_TEXT_BASE 0x97800000 -#define CONFIG_SYS_L2CACHE_OFF - /* * Bootloader Components Configuration */ diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 1131db0a50..b7f1cb3c75 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -63,6 +63,7 @@ #define CONFIG_MXC_UART 1 #define CONFIG_SYS_MX31_UART1 1 +#define CONFIG_MXC_GPIO #define CONFIG_HARD_SPI 1 #define CONFIG_MXC_SPI 1 diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index 32ff1932c6..3b983afb69 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -30,6 +30,9 @@ #ifndef __CONFIG_H #define __CONFIG_H + +#define CONFIG_INTEGRATOR +#define CONFIG_ARCH_INTEGRATOR /* * High Level Configuration Options * (easy to change) @@ -47,7 +50,7 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_CM_INIT 1 #define CONFIG_CM_REMAP 1 -#undef CONFIG_CM_SPD_DETECT +#define CONFIG_CM_SPD_DETECT /* * Size of malloc() pool @@ -81,20 +84,28 @@ * Command line configuration. */ + #define CONFIG_CMD_IMI #define CONFIG_CMD_BDI +#define CONFIG_CMD_BOOTD #define CONFIG_CMD_MEMORY +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMLS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS #define CONFIG_BOOTDELAY 2 -#define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty" +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0 console=tty" #define CONFIG_BOOTCOMMAND "" /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "Integrator-AP # " /* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "# " #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) @@ -120,6 +131,12 @@ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_FLASH_BASE 0x24000000 diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index 2c8ca2ddc5..e9b68c6918 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -31,6 +31,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_INTEGRATOR +#define CONFIG_ARCH_INTEGRATOR /* * High Level Configuration Options * (easy to change) @@ -140,6 +142,12 @@ SIB at Block62 End Block62 address 0x24f80000 #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * FLASH and environment organization diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h deleted file mode 100644 index cfb7ceacc1..0000000000 --- a/include/configs/kb9202.h +++ /dev/null @@ -1,196 +0,0 @@ -/* - * Rick Bronson <rick@efn.org> - * - * Configuation settings for the AT91RM9200DK board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Adatped for KwikByte KB920x board from at91rm9200dk.h: 22APR2005 - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AT91_LEGACY - -/* ARM asynchronous clock */ -#define AT91C_MAIN_CLOCK 180000000 /* from 10 MHz crystal */ -#define AT91C_MASTER_CLOCK 60000000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ - -#define AT91_SLOW_CLOCK 32768 /* slow clock */ - -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ -/* Only define one of the following, based on board type */ -/* #define CONFIG_KB9200 1 KwikByte KB9202 board */ -/* #define CONFIG_KB9201 1 KwikByte KB9202 board */ -#define CONFIG_KB9202 1 /* KwikByte KB9202 board */ - -#define CONFIG_KB920x 1 /* Any KB920x board */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define USE_920T_MMU 1 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_SKIP_LOWLEVEL_INIT - -#define CONFIG_SYS_LONGHELP - -#ifndef roundup -#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) -#endif -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (roundup(CONFIG_ENV_SIZE,4096) + 128*1024) - -#define CONFIG_BAUDRATE 115200 - -/* - * Hardware drivers - */ - -/* define one of these to choose the DBGU, USART0 or USART1 as console */ -#define CONFIG_AT91RM9200_USART -#define CONFIG_DBGU -#undef CONFIG_USART0 -#undef CONFIG_USART1 - -#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ - -#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ENV_OVERWRITE 1 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_MISC - - -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - (512*1024) - -#define CONFIG_NET_MULTI 1 -#ifdef CONFIG_NET_MULTI -#define CONFIG_DRIVER_AT91EMAC 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#else -#define CONFIG_DRIVER_ETHER 1 -#endif -#define CONFIG_NET_RETRY_COUNT 20 - -#define CONFIG_SYS_FLASH_BASE 0x10000000 - -#ifdef CONFIG_KB9202 -#define PHYS_FLASH_SIZE 0x1000000 -#else -#define PHYS_FLASH_SIZE 0x200000 -#endif - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 - -#define CONFIG_HARD_I2C - -#define CONFIG_ENV_IS_IN_EEPROM - -#ifdef CONFIG_KB9202 -#define CONFIG_ENV_OFFSET 0x3E00 -#define CONFIG_ENV_SIZE 0x0200 -#else -#define CONFIG_ENV_OFFSET 0x1000 -#define CONFIG_ENV_SIZE 0x1000 -#endif -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* not used */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } - -#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI - -#ifndef __ASSEMBLY__ -/*----------------------------------------------------------------------- - * Board specific extension for bd_info - * - * This structure is embedded in the global bd_info (bd_t) structure - * and can be used by the board specific code (eg board/...) - */ - -struct bd_info_ext { - /* helper variable for board environment handling - * - * env_crc_valid == 0 => uninitialised - * env_crc_valid > 0 => environment crc in flash is valid - * env_crc_valid < 0 => environment crc in flash is invalid - */ - int env_crc_valid; -}; -#endif - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ - /* AT91C_TC_TIMER_DIV1_CLOCK */ - -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - -#endif diff --git a/include/configs/lpd7a400-10.h b/include/configs/lpd7a400-10.h deleted file mode 100644 index 91bf1fabdd..0000000000 --- a/include/configs/lpd7a400-10.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Logic LH7A400-10 card engine - */ - -#ifndef __LPD7A400_10_H -#define __LPD7A400_10_H - - -#define CONFIG_ARM920T 1 /* arm920t core */ -#define CONFIG_LH7A40X 1 /* Sharp LH7A40x SoC family */ -#define CONFIG_LH7A400 1 /* Sharp LH7A400 S0C */ - -/* The system clock PLL input frequency */ -#define CONFIG_SYS_CLK_FREQ 14745600 /* System Clock PLL Input (Hz) */ - -/* ticks per second */ -#define CONFIG_SYS_HZ (508469) - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define CONFIG_SYS_FLASH_BASE 0x00000000 /* Flash Bank #1 */ - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (64) /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/*---------------------------------------------------------------------- - * Using SMC91C111 LAN chip - * - * Default IO base of chip is 0x300, Card Engine has this address lines - * (LAN chip) tied to Vcc, so we just care about the chip select - */ -#define CONFIG_NET_MULTI -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE (0x70000000) -#undef CONFIG_SMC_USE_32_BIT - -#endif /* __LPD7A400_10_H */ diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h deleted file mode 100644 index 06f3d7e58f..0000000000 --- a/include/configs/lpd7a400.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __LPD7A400_H_ -#define __LPD7A400_H_ - -#define CONFIG_LPD7A400 /* Logic LH7A400 SDK */ - -#undef CONFIG_USE_IRQ - -/* - * This board uses the logic LH7A400-10 card engine - */ -#include <configs/lpd7a400-10.h> - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * select serial console configuration - */ -#define CONFIG_LH7A40X_SERIAL -#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_IPADDR 192.168.1.100 -#define CONFIG_NETMASK 255.255.1.0 -#define CONFIG_SERVERIP 192.168.1.1 - -#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#ifndef USE_920T_MMU - #define CONFIG_CMD_PING - #undef CONFIG_CMD_CACHE -#else - #define CONFIG_CMD_DATE -#endif - - -#define CONFIG_BOOTDELAY 3 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "LPD7A400> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xc0300000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xc0f00000 /* default load address */ - -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* size and location of u-boot in flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (256<<10) - -#define CONFIG_ENV_IS_IN_FLASH 1 - -/* Address and size of Primary Environment Sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0xFC0000) -#define CONFIG_ENV_SIZE 0x40000 - -#endif /* __LPD7A400_H_ */ diff --git a/include/configs/lpd7a404-10.h b/include/configs/lpd7a404-10.h deleted file mode 100644 index b10e69d237..0000000000 --- a/include/configs/lpd7a404-10.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Logic LH7A400-10 card engine - */ - -#ifndef __LPD7A404_10_H -#define __LPD7A404_10_H - - -#define CONFIG_ARM920T 1 /* arm920t core */ -#define CONFIG_LH7A40X 1 /* Sharp LH7A40x SoC family */ -#define CONFIG_LH7A404 1 /* Sharp LH7A404 SoC */ - -/* The system clock PLL input frequency */ -#define CONFIG_SYS_CLK_FREQ 14745600 /* System Clock PLL Input (Hz) */ - -/* ticks per second */ -#define CONFIG_SYS_HZ (508469) - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define CONFIG_SYS_FLASH_BASE 0x00000000 /* Flash Bank #1 */ - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (64) /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/*---------------------------------------------------------------------- - * Using SMC91C111 LAN chip - * - * Default IO base of chip is 0x300, Card Engine has this address lines - * (LAN chip) tied to Vcc, so we just care about the chip select - */ -#define CONFIG_NET_MULTI -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE (0x70000000) -#undef CONFIG_SMC_USE_32_BIT - -#endif /* __LPD7A404_10_H */ diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h deleted file mode 100644 index 7535f62d3d..0000000000 --- a/include/configs/lpd7a404.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __LPD7A404_H_ -#define __LPD7A404_H_ - -#define CONFIG_LPD7A404 /* Logic LH7A400 SDK */ - -#undef CONFIG_USE_IRQ - -/* - * This board uses the logic LH7A404-10 card engine - */ -#include <configs/lpd7a404-10.h> - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * select serial console configuration - */ -#define CONFIG_LH7A40X_SERIAL -#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_IPADDR 192.168.1.100 -#define CONFIG_NETMASK 255.255.1.0 -#define CONFIG_SERVERIP 192.168.1.1 - -#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#ifndef USE_920T_MMU - #define CONFIG_CMD_PING - #undef CONFIG_CMD_CACHE -#else - #define CONFIG_CMD_DATE -#endif - - -#define CONFIG_BOOTDELAY 3 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "LPD7A404> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xc0300000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xc0f00000 /* default load address */ - -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* size and location of u-boot in flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (256<<10) - -#define CONFIG_ENV_IS_IN_FLASH 1 - -/* Address and size of Primary Environment Sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0xFC0000) -#define CONFIG_ENV_SIZE 0x40000 - -#endif /* __LPD7A404_H_ */ diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h deleted file mode 100644 index 68f0415a37..0000000000 --- a/include/configs/m501sk.h +++ /dev/null @@ -1,228 +0,0 @@ -/* - * Based on Modifications by Alan Lu / Artila and - * Rick Bronson <rick@efn.org> - * - * Configuration settings for the Artila M-501 starter kit, - * with V02 processor card. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AT91_LEGACY - -/* ARM asynchronous clock */ -/* from 18.432 MHz crystal (18432000 / 4 * 39) */ -#define AT91C_MAIN_CLOCK 179712000 -/* Perip clock (AT91C_MASTER_CLOCK / 3) */ -#define AT91C_MASTER_CLOCK 59904000 -#define AT91_SLOW_CLOCK 32768 /* slow clock */ - -#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ -#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_MENUPROMPT "." -/* - * LowLevel Init - */ -#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 -/* flash */ -#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 -#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ -#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -/* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ -#define CONFIG_SYS_MCKR_VAL 0x00000202 - -/* sdram */ -#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 -#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 -#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ -#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -#define CONFIG_BAUDRATE 115200 - -/* Hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */ -#define CONFIG_SYS_AT91C_BRGR_DIVISOR 33 - -/* - * Hardware drivers - */ -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_FLASH_PROTECTION /*for Intel P30 Flash*/ -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100 -#define CONFIG_SYS_I2C_SLAVE 0 -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#undef CONFIG_ENV_IS_IN_EEPROM -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_AT24C16 -#define CONFIG_SYS_I2C_RTC_ADDR 0x32 -#undef CONFIG_RTC_DS1338 -#define CONFIG_RTC_RS5C372A -#undef CONFIG_POST -#define CONFIG_M501SK -#define CONFIG_CMC_PU2 - -/* define one of these to choose the DBGU, USART0 or USART1 as console */ -#define CONFIG_AT91RM9200_USART -#define CONFIG_DBGU -#undef CONFIG_USART0 -#undef CONFIG_USART1 - -#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ -#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ - -#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200 " \ - "initrd=0x20800000,8192000 ramdisk_size=15360 " \ - "root=/dev/ram0 rw mtdparts=phys_mapped_flash:" \ - "128k(loader)ro,128k(reserved)ro,1408k(linux)" \ - "ro,2560k(ramdisk)ro,-(userdisk)" -#define CONFIG_BOOTCOMMAND "bootm 10040000 101a0000" -#define CONFIG_BOOTDELAY 1 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_IPADDR 192.168.1.100 -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 192.168.1.254 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_BOOTFILE uImage -#define CONFIG_ETHADDR 00:13:48:aa:bb:cc -#define CONFIG_ENV_OVERWRITE 1 -#define BOARD_LATE_INIT - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "unlock=yes\0" - -#define CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_EEPROM -#define CONFIG_CMD_NET -#define CONFIG_CMD_RUN -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_PING -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DATE -#define CONFIG_CMD_POST -#define CONFIG_CMD_MISC -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_IMI -#define CONFIG_CMD_NFS -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_SAVEENV - -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_PROMPT_HUSH_PS2 ">>" - -#define CONFIG_SYS_MAX_NAND_DEVICE 0 /* Max number of NAND devices */ - -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ - -#define CONFIG_SYS_MEMTEST_START 0x21000000 /* PHYS_SDRAM */ -/* CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 */ -#define CONFIG_SYS_MEMTEST_END 0x00100000 - -#define CONFIG_NET_MULTI 1 -#ifdef CONFIG_NET_MULTI -#define CONFIG_DRIVER_AT91EMAC 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#else -#define CONFIG_DRIVER_ETHER 1 -#endif -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_AT91C_USE_RMII - -#define PHYS_FLASH_1 0x10000000 -#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#ifdef CONFIG_ENV_IS_IN_DATAFLASH -#define CONFIG_ENV_OFFSET 0x20000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x2000 -#else -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x00020000) -#define CONFIG_ENV_SIZE 2048 -#endif - -#ifdef CONFIG_ENV_IS_IN_EEPROM -#define CONFIG_ENV_OFFSET 1024 -#define CONFIG_ENV_SIZE 1024 -#endif - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -/* use for protect flash sectors */ -#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */ -#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) -#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 , 19200, 38400, 57600, 9600 } - -#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 - -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - -#endif diff --git a/include/configs/meesc.h b/include/configs/meesc.h index a27b36b378..e100cb41ce 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -3,7 +3,7 @@ * Stelian Pop <stelian.pop@leadtechdesign.com> * Lead Tech Design <www.leadtechdesign.com> * - * (C) Copyright 2009-2010 + * (C) Copyright 2009-2011 * Daniel Gorsulowski <daniel.gorsulowski@esd.eu> * esd electronic system design gmbh <www.esd.eu> * @@ -31,49 +31,68 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* Common stuff */ -#define CONFIG_MEESC 1 /* Board is esd MEESC */ -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ -#define CONFIG_AT91SAM9263 1 /* It's an AT91SAM9263 SoC */ +/* + * SoC must be defined first, before hardware.h is included. + * In this case SoC is defined in boards.cfg. + */ +#include <asm/hardware.h> + +/* + * Warning: changing CONFIG_SYS_TEXT_BASE requires + * adapting the initial boot program. + * Since the linker has to swallow that define, we must use a pure + * hex number here! + */ +#define CONFIG_SYS_TEXT_BASE 0x20002000 + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ #define CONFIG_SYS_HZ 1000 /* decrementer freq */ -#define CONFIG_DISPLAY_BOARDINFO 1 -#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info and speed */ -#define CONFIG_PREBOOT /* enable preboot variable */ -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_SERIAL_TAG 1 -#define CONFIG_REVISION_TAG 1 -#undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */ +/* Misc CPU related */ #define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_SERIAL_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_MISC_INIT_R /* Call misc_init_r */ +#undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */ -#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_BOARDINFO /* call checkboard() */ +#define CONFIG_DISPLAY_CPUINFO /* display cpu info and speed */ +#define CONFIG_PREBOOT /* enable preboot variable */ /* * Hardware drivers */ +/* required until arch/arm/include/asm/arch-at91/at91sam9263.h is reworked */ +#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP + +/* general purpose I/O */ +#define CONFIG_AT91_GPIO + /* Console output */ -#define CONFIG_AT91_GPIO 1 -#define CONFIG_ATMEL_USART 1 -#undef CONFIG_USART0 -#undef CONFIG_USART1 -#undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600} -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK 1 +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK /* * BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1 +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. @@ -84,97 +103,112 @@ #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_IMLS -#define CONFIG_CMD_PING 1 -#define CONFIG_CMD_DHCP 1 -#define CONFIG_CMD_NAND 1 -#define CONFIG_CMD_USB 1 +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NAND +#define CONFIG_CMD_USB /* LED */ -#define CONFIG_AT91_LED 1 +#define CONFIG_AT91_LED -/* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 +/* + * SDRAM: 1 bank, min 32, max 128 MB + * Initialized before u-boot gets started. + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0x20000000 /* ATMEL_BASE_CS1 */ +#define CONFIG_SYS_SDRAM_SIZE 0x02000000 + +#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x00100000) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01E00000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x00100000) + +/* + * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, + * leaving the correct space for initial global data structure above + * that address while providing maximum stack area below. + */ +#define CONFIG_SYS_INIT_SP_ADDR \ + (ATMEL_BASE_SRAM0 + 0x1000 - GENERATED_GBL_DATA_SIZE) /* DataFlash */ -#define CONFIG_ATMEL_DATAFLASH_SPI -#define CONFIG_HAS_DATAFLASH 1 -#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -#define AT91_SPI_CLK 15000000 -#define DATAFLASH_TCSS (0x1a << 16) -#define DATAFLASH_TCHS (0x1 << 24) +#ifdef CONFIG_SYS_USE_DATAFLASH +# define CONFIG_ATMEL_DATAFLASH_SPI +# define CONFIG_HAS_DATAFLASH +# define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) +# define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 +# define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ +# define AT91_SPI_CLK 15000000 +# define DATAFLASH_TCSS (0x1a << 16) +# define DATAFLASH_TCHS (0x1 << 24) +#endif /* NOR flash is not populated, disable it */ -#define CONFIG_SYS_NO_FLASH 1 +#define CONFIG_SYS_NO_FLASH /* NAND flash */ #ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_DBW_8 1 -/* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -/* our CLE is AD22 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ +# define CONFIG_NAND_ATMEL +# define CONFIG_SYS_MAX_NAND_DEVICE 1 +# define CONFIG_SYS_NAND_BASE 0x40000000 /* ATMEL_BASE_CS3 */ +# define CONFIG_SYS_NAND_DBW_8 +# define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +# define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +# define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15 +# define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22 +# define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* Ethernet */ -#define CONFIG_MACB 1 -#define CONFIG_RMII 1 -#define CONFIG_NET_MULTI 1 +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_MULTI +#define CONFIG_FIT #define CONFIG_NET_RETRY_COUNT 20 #undef CONFIG_RESET_PHY_R /* USB */ #define CONFIG_USB_ATMEL -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_USB_OHCI_NEW +#define CONFIG_DOS_PARTITION +#define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE 1 -#define CONFIG_CMD_FAT 1 - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END 0x21e00000 - -#define CONFIG_SYS_USE_DATAFLASH 1 -#undef CONFIG_SYS_USE_NANDFLASH /* CAN */ -#define CONFIG_AT91_CAN 1 +#define CONFIG_AT91_CAN /* hw-controller addresses */ -#define CONFIG_ET1100_BASE 0x70000000 +#define CONFIG_ET1100_BASE 0x70000000 + +#ifdef CONFIG_SYS_USE_DATAFLASH /* bootstrap + u-boot + env in dataflash on CS0 */ -#define CONFIG_ENV_IS_IN_DATAFLASH 1 -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \ +# define CONFIG_ENV_IS_IN_DATAFLASH +# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \ 0x8400) -#define CONFIG_ENV_OFFSET 0x4200 -#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \ +# define CONFIG_ENV_OFFSET 0x4200 +# define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \ CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x4200 +# define CONFIG_ENV_SIZE 0x4200 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } +#elif CONFIG_SYS_USE_NANDFLASH + +/* bootstrap + u-boot + env + linux in nandflash */ +# define CONFIG_ENV_IS_IN_NAND 1 +# define CONFIG_ENV_OFFSET 0xC0000 +# define CONFIG_ENV_SIZE 0x20000 + +#endif #define CONFIG_SYS_PROMPT "=> " -#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING /* * Size of malloc() pool @@ -185,7 +219,7 @@ #define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ #ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported +# error CONFIG_USE_IRQ not supported #endif #endif diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h deleted file mode 100644 index ddbc65afa2..0000000000 --- a/include/configs/mx1fs2.h +++ /dev/null @@ -1,305 +0,0 @@ -/* - * Copyright (C) 2004 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */ -#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */ -#define CONFIG_MX1FS2 1 /* on a mx1fs2 board */ -#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */ - -/* - * Select serial console configuration - */ -#undef _CONFIG_UART1 /* internal uart 1 */ -#define _CONFIG_UART2 /* internal uart 2 */ -#undef _CONFIG_UART3 /* internal uart 3 */ -#undef _CONFIG_UART4 /* internal uart 4 */ -#undef CONFIG_SILENT_CONSOLE /* use this to disable output */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_JFFS2 - -#undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_PING -#undef CONFIG_CMD_SOURCE - -/* - * Boot options. Setting delay to -1 stops autostart count down. - */ -#define CONFIG_BOOTDELAY 10 -#define CONFIG_BOOTARGS "root=/dev/mtdblock4 console=ttySMX0,115200n8 rootfstype=jffs2" -#define CONFIG_BOOTCOMMAND "bootm 10080000" -#define CONFIG_SHOW_BOOT_PROGRESS - -/* - * General options for u-boot. Modify to save memory foot print - */ -#define CONFIG_SYS_LONGHELP /* undef saves memory */ -#define CONFIG_SYS_PROMPT "mx1fs2> " /* prompt string */ -#define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */ -#define CONFIG_SYS_MAXARGS 16 /* max command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */ - -#define CONFIG_SYS_MEMTEST_START 0x08100000 /* memtest test area */ -#define CONFIG_SYS_MEMTEST_END 0x08F00000 - -#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ -#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_BAUDRATE 115200 -/* - * Definitions related to passing arguments to kernel. - */ -#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */ -#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */ -#define CONFIG_INITRD_TAG 1 /* send initrd params */ - -/* - * Malloc pool need to host env + 128 Kb reserve for other allocations. - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) ) - -#define CONFIG_STACKSIZE (120<<10) /* stack size */ - -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */ -#endif - -/* SDRAM Setup Values - * 0x910a8300 Precharge Command CAS 3 - * 0x910a8200 Precharge Command CAS 2 - * - * 0xa10a8300 AutoRefresh Command CAS 3 - * 0xa10a8200 Set AutoRefresh Command CAS 2 - */ -#define PRECHARGE_CMD 0x910a8300 -#define AUTOREFRESH_CMD 0xa10a8300 - -#define BUS32BIT_VERSION -/* - * SDRAM Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */ -#define MX1FS2_SDRAM_1 0x08000000 /* SDRAM bank #1 */ -#ifdef BUS32BIT_VERSION -#define MX1FS2_SDRAM_1_SIZE (0x04000000 - 0x100000) /* 64 MB - 1M Framebuffer */ -#else -#define MX1FS2_SDRAM_1_SIZE (0x01FC0000 - 0x100000) /* 32 MB - 1M Framebuffer */ -#endif -/* - * Flash Controller settings - */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */ - -#ifdef BUS32BIT_VERSION -#define MX1FS2_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */ -#define MX1FS2_FLASH_INTERLEAVE 2 /* ... made of 2 chips */ -#define MX1FS2_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank*/ -#define MX1FS2_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */ -#else -#define MX1FS2_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */ -#define MX1FS2_FLASH_INTERLEAVE 1 /* ... made of 1 chip */ -#define MX1FS2_FLASH_BANK_SIZE 0x01000000 /* size of one flash bank*/ -#define MX1FS2_FLASH_SECT_SIZE 0x00010000 /* size of erase sector */ -#endif -#define MX1FS2_FLASH_BASE 0x10000000 /* location of flash memory */ -#define MX1FS2_FLASH_UNLOCK 1 /* perform hw unlock first */ - -/* This should be defined if CFI FLASH device is present. Actually benefit - is not so clear to me. In other words we can provide more informations - to user, but this expects more complex flash handling we do not provide - now.*/ -#undef CONFIG_SYS_FLASH_CFI - -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Erase operation */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Write operation */ - -#define CONFIG_SYS_FLASH_BASE MX1FS2_FLASH_BASE - -/* - * This is setting for JFFS2 support in u-boot. - * Right now there is no gain for user, but later on booting kernel might be - * possible. Consider using XIP kernel running from flash to save RAM - * footprint. - * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. - */ - -/* - * JFFS2 partitions - */ -/* No command line, one static partition, whole device */ -/* -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00050000 -*/ - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=mx1fs2-0" - -#ifdef BUS32BIT_VERSION -#define MTDPARTS_DEFAULT "mtdparts=mx1fs2-0:2m@5m(part0),5m@9m(part1)" -#else -#define MTDPARTS_DEFAULT "mtdparts=mx1fs2-0:-@320k(jffs2)" -#endif - -/* - * Environment setup. Definitions of monitor location and size with - * definition of environment setup ends up in 2 possibilities. - * 1. Embeded environment - in u-boot code is space for environment - * 2. Environment is read from predefined sector of flash - * Right now we support 2. possiblity, but expecting no env placed - * on mentioned address right now. This also needs to provide whole - * sector for it - for us 256Kb is really waste of memory. U-boot uses - * default env. and until kernel parameters could be sent to kernel - * env. has no sense to us. - */ - -#define CONFIG_SYS_MONITOR_BASE 0x10000000 -#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x10020000 /* absolute address for now */ -#define CONFIG_ENV_SIZE 0x20000 - -#define CONFIG_ENV_OVERWRITE 1 /* env is not writable now */ - -/* Setup CS4 and CS5 */ -#define CONFIG_SYS_GIUS_A_VAL 0x0003fffe - -/* - * CSxU_VAL: - * 63| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x|32 - * |DTACK_SEL|0|BCD | BCS | PSZ|PME|SYNC| DOL | CNC| WSC | 0| WWS | EDC | - * - * CSxL_VAL: - * 31| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x| 0 - * | OEA | OEN | WEA | WEN | CSA |EBC| DSZ | 0|SP|0|WP| 0 0|PA|CSEN| - */ - -#define CONFIG_SYS_CS0U_VAL 0x00008C00 -#define CONFIG_SYS_CS0L_VAL 0x22222601 -#define CONFIG_SYS_CS1U_VAL 0x00008C00 -#define CONFIG_SYS_CS1L_VAL 0x22222301 -#define CONFIG_SYS_CS4U_VAL 0x00008C00 -#define CONFIG_SYS_CS4L_VAL 0x22222301 -#define CONFIG_SYS_CS5U_VAL 0x00008C00 -#define CONFIG_SYS_CS5L_VAL 0x22222301 - -/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1) - f_ref=16,777MHz - - 0x002a141f: 191,9944MHz - 0x040b2007: 144MHz - 0x042a141f: 96MHz - 0x0811140d: 64MHz - 0x040e200e: 150MHz - 0x00321431: 200MHz - - 0x08001800: 64MHz mit 16er Quarz - 0x04001800: 96MHz mit 16er Quarz - 0x04002400: 144MHz mit 16er Quarz - - 31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0 - |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------| */ - -#define CONFIG_SYS_MPCTL0_VAL 0x07E723AD -#define CONFIG_SYS_MPCTL1_VAL 0x00000040 -#define CONFIG_SYS_PCDR_VAL 0x00010005 -#define CONFIG_SYS_GPCR_VAL 0x00000FFB - -#define USE_16M_OSZI /* If you have one, you want to use it - The internal 32kHz oszillator jitters */ -#ifdef USE_16M_OSZI - -#define CONFIG_SYS_SPCTL0_VAL 0x04001401 -#define CONFIG_SYS_SPCTL1_VAL 0x0C000040 -#define CONFIG_SYS_CSCR_VAL 0x07030003 -#define CONFIG_SYS_CLK_FREQ 16780000 -#define CONFIG_SYSPLL_CLK_FREQ 16000000 - -#else - -#define CONFIG_SYS_SPCTL0_VAL 0x07E716D1 -#define CONFIG_SYS_CSCR_VAL 0x06000003 -#define CONFIG_SYS_CLK_FREQ 16780000 -#define CONFIG_SYSPLL_CLK_FREQ 16780000 - -#endif - -/* - * Well this has to be defined, but on the other hand it is used differently - * one may expect. For instance loadb command do not cares :-) - * So advice is - do not relay on this... - */ -#define CONFIG_SYS_LOAD_ADDR 0x08400000 - -#define CONFIG_SYS_FMCR_VAL 0x00000003 /* Reset Default */ - -/* Bit[0:3] contain PERCLK1DIV for UART 1 - 0x000b00b ->b<- -> 192MHz/12=16MHz - 0x000b00b ->8<- -> 144MHz/09=16MHz - 0x000b00b ->3<- -> 64MHz/4=16MHz */ - -#ifdef _CONFIG_UART1 -#define CONFIG_IMX_SERIAL -#define CONFIG_IMX_SERIAL1 -#elif defined _CONFIG_UART2 -#define CONFIG_IMX_SERIAL -#define CONFIG_IMX_SERIAL2 -#elif defined _CONFIG_UART3 | defined _CONFIG_UART4 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_CLK 3686400 -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_CONS_INDEX 1 -#ifdef _CONFIG_UART3 -#define CONFIG_SYS_NS16550_COM1 0x15000000 -#elif defined _CONFIG_UART4 -#define CONFIG_SYS_NS16550_COM1 0x16000000 -#endif -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 3c61911b04..adb2ee1ce9 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -65,6 +65,7 @@ #define CONFIG_MXC_SPI 1 #define CONFIG_DEFAULT_SPI_BUS 1 #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) +#define CONFIG_MXC_GPIO #define CONFIG_FSL_PMIC #define CONFIG_FSL_PMIC_BUS 1 diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 086355bb67..4e9022d814 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -63,6 +63,7 @@ #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 0xfe #define CONFIG_MXC_SPI +#define CONFIG_MXC_GPIO /* @@ -173,11 +174,11 @@ /* * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 CSD0_BASE_ADDR #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) -#define iomem_valid_addr(addr, size) \ - (addr >= PHYS_SDRAM_1 && addr <= (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)) +#define PHYS_SDRAM_2 CSD1_BASE_ADDR +#define PHYS_SDRAM_2_SIZE (128 * 1024 * 1024) #define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000) diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index fd42afcedc..7d05dc8429 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -35,8 +35,6 @@ #define CONFIG_SYS_TEXT_BASE 0x97800000 -#define CONFIG_SYS_L2CACHE_OFF - #include <asm/arch/imx-regs.h> /* * Disabled for now due to build problems under Debian and a significant @@ -62,6 +60,7 @@ */ #define CONFIG_MXC_UART #define CONFIG_SYS_MX51_UART1 +#define CONFIG_MXC_GPIO /* * SPI Configs diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index c872510679..c0b8d6a61a 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -29,8 +29,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_L2_OFF - #include <asm/arch/imx-regs.h> #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 5f5403558f..7fb1d9aa75 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -29,8 +29,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_SYS_L2CACHE_OFF - #include <asm/arch/imx-regs.h> #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 544e3fbbdf..cfb38a5673 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -30,8 +30,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_L2_OFF - #include <asm/arch/imx-regs.h> #define CONFIG_CMDLINE_TAG diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index 65d5e05504..49f8c6e8e7 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -29,8 +29,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_L2_OFF - #include <asm/arch/imx-regs.h> #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ diff --git a/include/configs/netstar.h b/include/configs/netstar.h deleted file mode 100644 index f159013934..0000000000 --- a/include/configs/netstar.h +++ /dev/null @@ -1,245 +0,0 @@ -/* - * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl - * - * Configuation settings for the TI OMAP NetStar board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <configs/omap1510.h> - -#define CONFIG_ARM925T 1 /* This is an arm925t CPU */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP1510 1 /* which is in a 5910 */ - -/* Input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz */ -#define CONFIG_XTAL_FREQ 12000000 /* 12MHz */ - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -#define CONFIG_MISC_INIT_R /* There is nothing to really init */ -#define BOARD_LATE_INIT /* but we flash the LEDs here */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x10000000 -#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024) -#define PHYS_FLASH_1 0x00000000 - -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR 0x4000 -#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_SECT_SIZE (8 * 1024) -#define CONFIG_ENV_ADDR_REDUND 0x6000 -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE -#define CONFIG_ENV_OVERWRITE - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) - -/* - * The stack size is set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (1 * 1024 * 1024) - -/* - * Hardware drivers - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ) -#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE - -#define CONFIG_NET_MULTI -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE 0x04000300 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 19 - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_FLASH_CFI_LEGACY -#define CONFIG_SYS_FLASH_LEGACY_512Kx16 - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x04000000 + (2 << 23) -#define NAND_ALLOW_ERASE_ALL 1 - -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP1510_I2C - -#define CONFIG_RTC_DS1307 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* - * Partitions (mtdparts command line support) - */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=gen_nand.0" -#define MTDPARTS_DEFAULT "mtdparts=" \ - "physmap-flash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);" \ - "gen_nand.0:4M(kernel0),40M(rootfs0),4M(kernel1),40M(rootfs1),-(data)" - -/* - * Command line configuration - */ -#define CONFIG_CMD_BDI -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NAND -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_RUN - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH - -#define CONFIG_LOOPW - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ -#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ -#define CONFIG_BOOTCOMMAND "run fboot" -#define CONFIG_PREBOOT "run setup" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "autostart=yes\0" \ - "ospart=0\0" \ - "setup=setenv bootargs console=ttyS0,$baudrate $mtdparts\0" \ - "setpart=" \ - "if test -n $swapos; then " \ - "setenv swapos; saveenv; " \ - "if test $ospart -eq 0; then " \ - "setenv ospart 1; " \ - "else " \ - "setenv ospart 0; " \ - "fi; " \ - "fi\0" \ - "nfsargs=setenv bootargs $bootargs " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \ - "nfsroot=$rootpath root=/dev/nfs\0" \ - "flashargs=run setpart;setenv bootargs $bootargs " \ - "root=mtd:rootfs$ospart ro " \ - "rootfstype=jffs2\0" \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \ - "fboot=run flashargs;nboot kernel$ospart\0" \ - "nboot=bootp;run nfsargs;tftp\0" - -#if 0 /* feel free to disable for development */ -#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT \ - "\nNetStar PBX - boot in %d secs...\n", bootdelay -#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "# " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_AUTO_COMPLETE - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 -#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \ - (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE) - -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x400000) - -/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. - * This time is further subdivided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE -#define CONFIG_SYS_PTV 7 -#define CONFIG_SYS_HZ 1000 - -#define OMAP5910_DPLL_DIV 1 -#define OMAP5910_DPLL_MUL \ - ((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ) - -#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */ -#define OMAP5910_LCD_DIV 2 /* CKL/4 */ -#define OMAP5910_ARM_DIV 0 /* CKL/1 */ -#define OMAP5910_DSP_DIV 0 /* CKL/1 */ -#define OMAP5910_TC_DIV 1 /* CKL/2 */ -#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */ -#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */ - -#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b */ -#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \ - (OMAP5910_LCD_DIV << 2) | \ - (OMAP5910_ARM_DIV << 4) | \ - (OMAP5910_DSP_DIV << 6) | \ - (OMAP5910_TC_DIV << 8) | \ - (OMAP5910_DSP_MMU_DIV << 10) | \ - (OMAP5910_ARM_TIM_SEL << 12)) - -#endif /* __CONFIG_H */ diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h index cb2a07f65a..9fa33172f7 100644 --- a/include/configs/omap1610h2.h +++ b/include/configs/omap1610h2.h @@ -34,7 +34,8 @@ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP1610 1 /* which is in a 1610 */ #define CONFIG_H2_OMAP1610 1 /* on an H2 Board */ -#define CONFIG_MACH_OMAP_H2 /* Select board mach-type */ + +#define CONFIG_MACH_TYPE MACH_TYPE_OMAP_H2 /* input clock of PLL */ /* the OMAP1610 H2 has 12MHz input clock */ diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h index e82b4b258f..e3f3487ce2 100644 --- a/include/configs/omap1610inn.h +++ b/include/configs/omap1610inn.h @@ -34,7 +34,8 @@ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP1610 1 /* which is in a 1610 */ #define CONFIG_INNOVATOROMAP1610 1 /* a Innovator Board */ -#define CONFIG_MACH_OMAP_INNOVATOR /* Select board mach-type */ + +#define CONFIG_MACH_TYPE MACH_TYPE_OMAP_INNOVATOR /* input clock of PLL */ /* the OMAP1610 Innovator has 12MHz input clock */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index d7cbc2fe6d..18c6debc01 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -114,6 +114,12 @@ /* DDR - I use Micron DDR */ #define CONFIG_OMAP3_MICRON_DDR 1 +/* Enable Multi Bus support for I2C */ +#define CONFIG_I2C_MULTI_BUS 1 + +/* Probe all devices */ +#define CONFIG_SYS_I2C_NOPROBES {0x0, 0x0} + /* USB */ #define CONFIG_MUSB_UDC 1 #define CONFIG_USB_OMAP3 1 @@ -128,6 +134,11 @@ #define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_USB_ETHER_ASIX + +#define CONFIG_NET_MULTI /* commands to include */ #include <config_cmd_default.h> @@ -148,13 +159,16 @@ #define CONFIG_USB_STORAGE /* USB storage support */ #define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_LED /* LED support */ +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#define CONFIG_CMD_NFS /* NFS support */ +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_SETEXPR /* Evaluate expressions */ #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ #undef CONFIG_CMD_IMI /* iminfo */ #undef CONFIG_CMD_IMLS /* List all found images */ -#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ -#undef CONFIG_CMD_NFS /* NFS support */ #define CONFIG_SYS_NO_FLASH #define CONFIG_HARD_I2C 1 @@ -164,6 +178,7 @@ #define CONFIG_SYS_I2C_BUS_SELECT 1 #define CONFIG_I2C_MULTI_BUS 1 #define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_VIDEO_OMAP3 /* DSS Support */ /* * TWL4030 @@ -194,41 +209,65 @@ /* partition */ /* Environment information */ -#define CONFIG_BOOTDELAY 10 +#define CONFIG_BOOTDELAY 2 #define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ + "loadaddr=0x80200000\0" \ + "rdaddr=0x81000000\0" \ "usbtty=cdc_acm\0" \ + "usbethaddr=de:ad:be:ef\0" \ + "bootfile=uImage.beagle\0" \ "console=ttyS2,115200n8\0" \ "mpurate=auto\0" \ + "buddy=none "\ + "optargs=\0" \ + "camera=none\0" \ "vram=12M\0" \ - "dvimode=1024x768MR-16@60\0" \ + "dvimode=640x480MR-16@60\0" \ "defaultdisplay=dvi\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ "mmcrootfstype=ext3 rootwait\0" \ "nandroot=/dev/mtdblock4 rw\0" \ "nandrootfstype=jffs2\0" \ + "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M\0" \ + "ramrootfstype=ext2\0" \ "mmcargs=setenv bootargs console=${console} " \ + "${optargs} " \ "mpurate=${mpurate} " \ + "buddy=${buddy} "\ + "camera=${camera} "\ "vram=${vram} " \ "omapfb.mode=dvi:${dvimode} " \ - "omapfb.debug=y " \ "omapdss.def_disp=${defaultdisplay} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ "nandargs=setenv bootargs console=${console} " \ + "${optargs} " \ "mpurate=${mpurate} " \ + "buddy=${buddy} "\ + "camera=${camera} "\ "vram=${vram} " \ "omapfb.mode=dvi:${dvimode} " \ - "omapfb.debug=y " \ "omapdss.def_disp=${defaultdisplay} " \ "root=${nandroot} " \ "rootfstype=${nandrootfstype}\0" \ - "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ + "bootenv=uEnv.txt\0" \ + "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ "env import -t $loadaddr $filesize\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "ramargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "mpurate=${mpurate} " \ + "buddy=${buddy} "\ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=${ramroot} " \ + "rootfstype=${ramrootfstype}\0" \ + "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ + "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} /boot/uImage\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ @@ -236,11 +275,18 @@ "run nandargs; " \ "nand read ${loadaddr} 280000 400000; " \ "bootm ${loadaddr}\0" \ + "ramboot=echo Booting from ramdisk ...; " \ + "run ramargs; " \ + "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ "if mmc rescan ${mmcdev}; then " \ + "if userbutton; then " \ + "setenv bootenv user.txt;" \ + "fi;" \ "echo SD/MMC found on device ${mmcdev};" \ "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ "run importbootenv;" \ "fi;" \ "if test -n $uenvcmd; then " \ @@ -261,18 +307,19 @@ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_PROMPT "OMAP3 beagleboard.org # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ - /* works on */ -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ - 0x01F00000) /* 31MB */ +#define CONFIG_SYS_ALT_MEMTEST 1 +#define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest */ + /* defaults */ +#define CONFIG_SYS_MEMTEST_END (0x87FFFFFF) /* 128MB */ +#define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */ #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ /* load address */ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index afa18aab39..fdc861d9d4 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -97,7 +97,8 @@ #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} #define CONFIG_MMC 1 -#define CONFIG_OMAP3_MMC 1 +#define CONFIG_GENERIC_MMC 1 +#define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1 /* DDR - I use Micron DDR */ @@ -198,6 +199,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ + "mmcdev=0\0" \ "console=ttyS2,115200n8\0" \ "mmcargs=setenv bootargs console=${console} " \ "root=/dev/mmcblk0p2 rw " \ @@ -205,10 +207,10 @@ "nandargs=setenv bootargs console=${console} " \ "root=/dev/mtdblock4 rw " \ "rootfstype=jffs2\0" \ - "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source ${loadaddr}\0" \ - "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ @@ -218,7 +220,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc init; then " \ + "if mmc rescan ${mmcdev}; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ @@ -237,7 +239,7 @@ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_PROMPT "OMAP3_EVM # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index d6e0a0614d..3f3726350e 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -169,7 +169,6 @@ "mpurate=${mpurate} " \ "vram=${vram} " \ "omapfb.mode=dvi:${dvimode} " \ - "omapfb.debug=y " \ "omapdss.def_disp=${defaultdisplay} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ @@ -177,7 +176,6 @@ "mpurate=${mpurate} " \ "vram=${vram} " \ "omapfb.mode=dvi:${dvimode} " \ - "omapfb.debug=y " \ "omapdss.def_disp=${defaultdisplay} " \ "root=${nandroot} " \ "rootfstype=${nandrootfstype}\0" \ @@ -213,7 +211,7 @@ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_PROMPT "Overo # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index bd55abc05d..3c2793ea42 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -100,8 +100,9 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ 115200} +#define CONFIG_GENERIC_MMC 1 #define CONFIG_MMC 1 -#define CONFIG_OMAP3_MMC 1 +#define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1 /* DDR - I use Micron DDR */ @@ -182,7 +183,7 @@ "mtdparts=" MTDPARTS_DEFAULT "\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc init && fatload mmc1 0 ${loadaddr} autoboot.scr || " \ + "if mmc rescan && fatload mmc1 0 ${loadaddr} autoboot.scr || " \ "ext2load mmc1 0 ${loadaddr} autoboot.scr; then " \ "source ${loadaddr}; " \ "fi; " \ @@ -196,7 +197,7 @@ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_PROMPT "Pandora # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index e1d8c7870e..6a826ba69b 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -189,8 +189,9 @@ */ #if defined(CONFIG_CMD_MMC) +#define CONFIG_GENERIC_MMC 1 #define CONFIG_MMC 1 -#define CONFIG_OMAP3_MMC 1 +#define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1 #endif @@ -269,7 +270,7 @@ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_PROMPT "OMAP34XX SDP # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index aeac7c70c1..fbac22235c 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -95,8 +95,9 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} +#define CONFIG_GENERIC_MMC 1 #define CONFIG_MMC 1 -#define CONFIG_OMAP3_MMC 1 +#define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1 /* DDR - I use Micron DDR */ @@ -178,6 +179,7 @@ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ "console=ttyS2,115200n8\0" \ + "mmcdev=0\0" \ "videomode=1024x768@60,vxres=1024,vyres=768\0" \ "videospec=omapfb:vram:2M,vram:4M\0" \ "mmcargs=setenv bootargs console=${console} " \ @@ -188,10 +190,10 @@ "video=${videospec},mode:${videomode} " \ "root=/dev/mtdblock4 rw " \ "rootfstype=jffs2\0" \ - "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source ${loadaddr}\0" \ - "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ @@ -201,7 +203,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc init; then " \ + "if mmc rescan ${mmcdev}; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ @@ -220,7 +222,7 @@ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_PROMPT "OMAP3 Zoom1 # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index 2a56182b94..8de3d317f0 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -95,8 +95,9 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE +#define CONFIG_GENERIC_MMC 1 #define CONFIG_MMC 1 -#define CONFIG_OMAP3_MMC 1 +#define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1 /* DDR - I use Micron DDR */ @@ -200,7 +201,7 @@ #define CONFIG_SYS_PROMPT "OMAP3 Zoom2 # " #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 16 diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index e313231a4d..6faf0e2f99 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -184,7 +184,7 @@ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_PROMPT "Panda # " -#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_CBSIZE 512 /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) @@ -245,7 +245,7 @@ /* Defines for SPL */ #define CONFIG_SPL #define CONFIG_SPL_TEXT_BASE 0x40304350 -#define CONFIG_SPL_MAX_SIZE 0x8000 /* 32 K */ +#define CONFIG_SPL_MAX_SIZE (38 * 1024) #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK #define CONFIG_SPL_BSS_START_ADDR 0x80000000 diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h index 5b3110cd50..ba6f49d030 100644 --- a/include/configs/omap4_sdp4430.h +++ b/include/configs/omap4_sdp4430.h @@ -190,7 +190,7 @@ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_PROMPT "OMAP4430 SDP # " -#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_CBSIZE 512 /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) @@ -251,7 +251,7 @@ /* Defines for SPL */ #define CONFIG_SPL #define CONFIG_SPL_TEXT_BASE 0x40304350 -#define CONFIG_SPL_MAX_SIZE 0x8000 /* 32 K */ +#define CONFIG_SPL_MAX_SIZE (38 * 1024) #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK #define CONFIG_SPL_BSS_START_ADDR 0x80000000 diff --git a/include/configs/origen.h b/include/configs/origen.h new file mode 100644 index 0000000000..889d5fc727 --- /dev/null +++ b/include/configs/origen.h @@ -0,0 +1,168 @@ +/* + * Copyright (C) 2011 Samsung Electronics + * + * Configuration settings for the SAMSUNG ORIGEN (S5PV310) board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* High Level Configuration Options */ +#define CONFIG_SAMSUNG 1 /* SAMSUNG core */ +#define CONFIG_S5P 1 /* S5P Family */ +#define CONFIG_S5PC210 1 /* which is in a S5PC210 SoC */ +#define CONFIG_ORIGEN 1 /* working with ORIGEN*/ + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Keep L2 Cache Disabled */ +#define CONFIG_L2_OFF 1 +#define CONFIG_SYS_DCACHE_OFF 1 + +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_TEXT_BASE 0x43E00000 + +/* input clock of PLL: ORIGEN has 24MHz input clock */ +#define CONFIG_SYS_CLK_FREQ 24000000 + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_EDITING + +/* MACH_TYPE_ORIGEN macro will be removed once added to mach-types */ +#define MACH_TYPE_ORIGEN 3455 +#define CONFIG_MACH_TYPE MACH_TYPE_ORIGEN + +/* Power Down Modes */ +#define S5P_CHECK_SLEEP 0x00000BAD +#define S5P_CHECK_DIDLE 0xBAD00000 +#define S5P_CHECK_LPA 0xABAD0000 + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) + +/* select serial console configuration */ +#define CONFIG_SERIAL_MULTI 1 +#define CONFIG_SERIAL2 1 /* use SERIAL 2 */ +#define CONFIG_BAUDRATE 115200 +#define S5PC210_DEFAULT_UART_OFFSET 0x020000 + +/* SD/MMC configuration */ +#define CONFIG_GENERIC_MMC 1 +#define CONFIG_MMC 1 +#define CONFIG_S5P_MMC 1 + +/* PWM */ +#define CONFIG_PWM 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +/* Command definition*/ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK +/* MMC SPL */ +#define CONFIG_SPL +#define COPY_BL2_FNPTR_ADDR 0x02020030 + +#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "ORIGEN # " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) + +#define CONFIG_SYS_HZ 1000 + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* Stack sizes */ +#define CONFIG_STACKSIZE (256 << 10) /* 256KB */ + +/* ORIGEN has 4 bank of DRAM */ +#define CONFIG_NR_DRAM_BANKS 4 +#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE +#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) +#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH 1 +#undef CONFIG_CMD_IMLS +#define CONFIG_IDENT_STRING " for ORIGEN" + +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +#define CONFIG_CLK_1000_400_200 + +/* MIU (Memory Interleaving Unit) */ +#define CONFIG_MIU_2BIT_21_7_INTERLEAVED + +#define CONFIG_ENV_IS_IN_MMC 1 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ +#define RESERVE_BLOCK_SIZE (512) +#define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ +#define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE) +#define CONFIG_DOS_PARTITION 1 + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) + +/* U-boot copy size from boot Media to DRAM.*/ +#define COPY_BL2_SIZE 0x80000 +#define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512) +#define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512) +#endif /* __CONFIG_H */ diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 26e50490f7..3a8b095f01 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -28,25 +28,29 @@ #ifndef __CONFIG_H #define __CONFIG_H +/* + * SoC must be defined first, before hardware.h is included. + * In this case SoC is defined in boards.cfg. + */ + +#include <asm/hardware.h> /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261" #define CONFIG_DISPLAY_BOARDINFO #define MASTER_PLL_DIV 15 #define MASTER_PLL_MUL 162 #define MAIN_PLL_DIV 2 +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 #define CONFIG_SYS_HZ 1000 -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ -#define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/ +#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261" #define CONFIG_PM9261 1 /* on a Ronetix PM9261 Board */ #define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_SYS_TEXT_BASE 0 -#define CONFIG_AT91FAMILY /* clocks */ /* CKGR_MOR - enable main osc. */ @@ -160,10 +164,8 @@ */ #define CONFIG_AT91_GPIO 1 #define CONFIG_ATMEL_USART 1 -#undef CONFIG_USART0 -#undef CONFIG_USART1 -#undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS /* LCD */ #define CONFIG_LCD 1 diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 96e12f24ce..1e282d2016 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -28,6 +28,12 @@ #ifndef __CONFIG_H #define __CONFIG_H +/* + * SoC must be defined first, before hardware.h is included. + * In this case SoC is defined in boards.cfg. + */ +#include <asm/hardware.h> + /* ARM asynchronous clock */ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -36,16 +42,15 @@ #define MASTER_PLL_MUL 65 #define MAIN_PLL_DIV 2 /* 2 or 4 */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_HZ 1000 -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ -#define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC*/ +#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9263" #define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */ #define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_SYS_TEXT_BASE 0 -#define CONFIG_AT91FAMILY /* clocks */ #define CONFIG_SYS_MOR_VAL \ @@ -170,10 +175,8 @@ */ #define CONFIG_AT91_GPIO 1 #define CONFIG_ATMEL_USART 1 -#undef CONFIG_USART0 -#undef CONFIG_USART1 -#undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS /* LCD */ #define CONFIG_LCD 1 diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index ec51ccf062..672f66345a 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -32,15 +32,20 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +/* + * SoC must be defined first, before hardware.h is included. + * In this case SoC is defined in boards.cfg. + */ +#include <asm/hardware.h> + #define CONFIG_PM9G45 1 /* It's an Ronetix PM9G45 */ -#define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC */ +#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9G45" /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_TEXT_BASE 0x73f00000 -#define CONFIG_AT91FAMILY +#define CONFIG_SYS_TEXT_BASE 0x73f00000 #define CONFIG_ARCH_CPU_INIT @@ -55,7 +60,8 @@ */ #define CONFIG_AT91_GPIO 1 #define CONFIG_ATMEL_USART 1 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_SYS_USE_NANDFLASH 1 diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index a5aa859c0c..6d0058f8e8 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -220,4 +220,16 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) +#include <asm/arch/gpio.h> +/* + * I2C Settings + */ +#define CONFIG_SOFT_I2C_GPIO_SCL s5pc110_gpio_get_nr(j4, 3) +#define CONFIG_SOFT_I2C_GPIO_SDA s5pc110_gpio_get_nr(j4, 0) + +#define CONFIG_SOFT_I2C 1 +#define CONFIG_SYS_I2C_SPEED 50000 +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_MAX_I2C_BUS 7 + #endif /* __CONFIG_H */ diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h deleted file mode 100644 index f0f19b2712..0000000000 --- a/include/configs/sbc2410x.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * Gary Jennejohn <garyj@denx.de> - * David Mueller <d.mueller@elsoft.ch> - * - * Modified for the friendly-arm SBC-2410X by - * (C) Copyright 2005 - * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com> - * - * Configuation settings for the friendly-arm SBC-2410X board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#undef CONFIG_SKIP_LOWLEVEL_INIT /* undef for developing */ - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ -#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */ -#define CONFIG_SBC2410X 1 /* on a friendly-arm SBC-2410X Board */ - -/* input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 12000000/* the SBC2410X has 12MHz input clock */ - - -#define USE_920T_MMU 1 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -#define CONFIG_NET_MULTI -#define CONFIG_CS8900 /* we have a CS8900 on-board */ -#define CONFIG_CS8900_BASE 0x19000300 -#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */ - -/* - * select serial console configuration - */ -#define CONFIG_S3C24X0_SERIAL -#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SBC2410X */ - -/************************************************************ - * RTC - ************************************************************/ -#define CONFIG_RTC_S3C24X0 1 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_PING - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "console=ttySAC0 root=/dev/nfs " \ - "nfsroot=192.168.0.1:/friendly-arm/rootfs_netserv " \ - "ip=192.168.0.69:192.168.0.1:192.168.0.1:255.255.255.0:debian:eth0:off" -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.0.69 -#define CONFIG_SERVERIP 192.168.0.1 -/*#define CONFIG_BOOTFILE "elinos-lart" */ -#define CONFIG_BOOTCOMMAND "dhcp; bootm" - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "[ ~ljh@GDLC ]# " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x33000000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 - -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -/* #define CONFIG_AMD_LV400 1 /\* uncomment this if you have a LV400 flash *\/ */ - -#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ - -#ifdef CONFIG_AMD_LV800 -#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ -#define CONFIG_SYS_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */ -#endif - -#ifdef CONFIG_AMD_LV400 -#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ -#define CONFIG_SYS_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */ -#endif - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ - -/*----------------------------------------------------------------------- - * NAND flash settings - */ -#if defined(CONFIG_CMD_NAND) -#define CONFIG_NAND_S3C2410 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#endif /* CONFIG_CMD_NAND */ - -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_TAG - -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -#define CONFIG_CMDLINE_EDITING - -#ifdef CONFIG_CMDLINE_EDITING -#undef CONFIG_AUTO_COMPLETE -#else -#define CONFIG_AUTO_COMPLETE -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h index 00f4dc9f7c..967a9914a1 100644 --- a/include/configs/sbc35_a9g20.h +++ b/include/configs/sbc35_a9g20.h @@ -26,54 +26,49 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_AT91_LEGACY +/* SoC type is defined in boards.cfg */ +#include <asm/hardware.h> +#include <asm/sizes.h> -#if defined(CONFIG_SBC35_A9G20_NANDFLASH) || defined(CONFIG_SBC35_A9G20_EEPROM) -#define CONFIG_SBC35_A9G20 -#endif - -#define CONFIG_AT91SAM9G20 - -#if defined(CONFIG_SBC35_A9G20_NANDFLASH) +#if defined(CONFIG_SYS_USE_NANDFLASH) #define CONFIG_ENV_IS_IN_NAND #else #define CONFIG_ENV_IS_IN_EEPROM #endif /* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12.000 MHz crystal */ -#define CONFIG_SYS_HZ 1000 - -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#define CONFIG_SYS_HZ 1000 #define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG #define CONFIG_SKIP_LOWLEVEL_INIT -/* - * Hardware drivers - */ -#define CONFIG_AT91_GPIO 1 +/* GPIO */ +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ +#define CONFIG_AT91_GPIO + +/* Serial */ #define CONFIG_ATMEL_USART -#define CONFIG_USART0 -#undef CONFIG_USART1 -#undef CONFIG_USART2 -#undef CONFIG_USART3 +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CONFIG_BOOTDELAY 3 /* * BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1 +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. @@ -86,14 +81,16 @@ #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_SOURCE -#define CONFIG_CMD_PING 1 -#define CONFIG_CMD_DHCP 1 -#define CONFIG_CMD_USB 1 +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_USB /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 +#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */ +#define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM1 + 0x1000 - \ + GENERATED_GBL_DATA_SIZE) /* SPI EEPROM */ #define CONFIG_SPI @@ -117,7 +114,7 @@ #define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_DBW_8 1 +#define CONFIG_SYS_NAND_DBW_8 /* our ALE is AD21 */ #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our CLE is AD22 */ @@ -129,27 +126,27 @@ #define CONFIG_SYS_NO_FLASH 1 /* Ethernet */ -#define CONFIG_MACB 1 -#define CONFIG_RMII 1 -#define CONFIG_NET_MULTI 1 +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_MULTI #define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R 1 -#define CONFIG_MACB_SEARCH_PHY 1 +#define CONFIG_RESET_PHY_R +#define CONFIG_MACB_SEARCH_PHY /* USB */ #define CONFIG_USB_ATMEL -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_USB_OHCI_NEW +#define CONFIG_DOS_PARTITION +#define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE 1 -#define CONFIG_CMD_FAT 1 +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_FAT #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END 0x23e00000 /* Env in EEPROM, bootstrap + u-boot in NAND*/ @@ -172,8 +169,6 @@ "120M(rootfs),-(other) " \ "rw rootfstype=jffs2" -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CONFIG_SYS_PROMPT "U-Boot> " #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h deleted file mode 100644 index 064749e2d6..0000000000 --- a/include/configs/smdk2400.h +++ /dev/null @@ -1,189 +0,0 @@ -/* - * (C) Copyright 2002-2005 - * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * Gary Jennejohn <garyj@denx.de> - * - * Configuation settings for the SAMSUNG board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM920T 1 /* This is an ARM920T core */ -#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ -#define CONFIG_S3C2400 1 /* specifically a SAMSUNG S3C2400 SoC */ -#define CONFIG_SMDK2400 1 /* on an SAMSUNG SMDK2400 Board */ - -/* input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 12000000 /* SMDK2400 has 12 MHz input clock */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -#define CONFIG_NET_MULTI -#define CONFIG_CS8900 /* we have a CS8900 on-board */ -#define CONFIG_CS8900_BASE 0x07000300 /* agrees with WIN CE PA */ -#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */ - -/* - * select serial console configuration - */ -#define CONFIG_S3C24X0_SERIAL -#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SAMSUNG */ - -#undef CONFIG_HWFLOW /* include RTS/CTS flow control support */ - -#undef CONFIG_MODEM_SUPPORT /* enable modem initialization stuff */ - -/* - * The following enables modem debugging stuff. The dbg() and - * 'char screen[1024]' are used for debug printfs. Unfortunately, - * it is usable only from BDI - */ -#undef CONFIG_MODEM_SUPPORT_DEBUG - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ - -/* Use s3c2400's RTC */ -#define CONFIG_RTC_S3C24X0 1 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DATE -#define CONFIG_CMD_SNTP - -#if defined(CONFIG_HWFLOW) - #define CONFIG_CONFIG_HWFLOW -#endif - -#if !defined(USE_920T_MMU) - #undef CONFIG_CMD_CACHE -#endif - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 134.98.93.36 -#define CONFIG_SERVERIP 134.98.93.22 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "SMDK2400 # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0c000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0e000000 /* 32 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x0cf00000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 - -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x0c000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define CONFIG_SYS_FLASH_BASE 0x00000000 /* Flash Bank #1 */ - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (64) /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 - -/* Address and size of Primary Environment Sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) -#define CONFIG_ENV_SIZE 0x40000 - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index c9acf5815f..d175ed6b36 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -65,7 +65,7 @@ /* * Architecture magic and machine type */ -#define MACH_TYPE 1270 +#define CONFIG_MACH_TYPE 1270 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h index 7b18022c6e..986aebaae4 100644 --- a/include/configs/tny_a9260.h +++ b/include/configs/tny_a9260.h @@ -30,19 +30,11 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_AT91_LEGACY - -#if defined(CONFIG_TNY_A9260_NANDFLASH) || defined(CONFIG_TNY_A9260_EEPROM) -#define CONFIG_TNY_A9260 -#elif defined(CONFIG_TNY_A9G20_NANDFLASH) || defined(CONFIG_TNY_A9G20_EEPROM) -#define CONFIG_TNY_A9G20 -#endif - -#ifdef CONFIG_TNY_A9260 -#define CONFIG_AT91SAM9260 -#else -#define CONFIG_AT91SAM9G20 -#endif +/* + * SoC must be defined first, before hardware.h is included. + * In this case SoC is defined in boards.cfg. + */ +#include <asm/hardware.h> #if defined(CONFIG_TNY_A9260_NANDFLASH) || defined(CONFIG_TNY_A9G20_NANDFLASH) #define CONFIG_ENV_IS_IN_NAND @@ -50,29 +42,36 @@ #define CONFIG_ENV_IS_IN_EEPROM #endif +/* Define actual evaluation board type from used processor type */ +#ifdef CONFIG_AT91SAM9G20 +# define CONFIG_TNY_A9G20 +#else +# define CONFIG_TNY_A9260 +#endif + /* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_HZ 1000 -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ #define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG #define CONFIG_SKIP_LOWLEVEL_INIT /* * Hardware drivers */ -#define CONFIG_AT91_GPIO 1 -#define CONFIG_ATMEL_USART 1 -#undef CONFIG_USART0 -#undef CONFIG_USART1 -#undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ +#define CONFIG_ATMEL_LEGACY +#define CONFIG_AT91_GPIO + +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CONFIG_BOOTDELAY 3 @@ -86,13 +85,16 @@ #undef CONFIG_CMD_IMLS #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS #undef CONFIG_CMD_SOURCE #undef CONFIG_CMD_USB /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 +#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */ +# define CONFIG_SYS_INIT_SP_ADDR \ + (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) /* SPI EEPROM */ #define CONFIG_SPI @@ -109,8 +111,8 @@ #define CONFIG_CMD_NAND #define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_DBW_8 1 +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +#define CONFIG_SYS_NAND_DBW_8 /* our ALE is AD21 */ #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our CLE is AD22 */ @@ -119,27 +121,27 @@ #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 /* NOR flash - no real flash on this board */ -#define CONFIG_SYS_NO_FLASH 1 +#define CONFIG_SYS_NO_FLASH -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_CMD_FAT 1 +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_FAT #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END 0x23e00000 /* Env in EEPROM, bootstrap + u-boot in NAND*/ #ifdef CONFIG_ENV_IS_IN_EEPROM #define CONFIG_ENV_OFFSET 0x20 -#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_SIZE 0x1000 #endif /* Env, bootstrap and u-boot in NAND */ #ifdef CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 -#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_SIZE 0x20000 #endif #define CONFIG_BOOTCOMMAND "nboot 0x21000000 0 400000" @@ -149,15 +151,12 @@ "120M(rootfs),-(other) " \ "rw rootfstype=jffs2" -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } - #define CONFIG_SYS_PROMPT "U-Boot> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING /* * Size of malloc() pool diff --git a/include/configs/versatile.h b/include/configs/versatile.h index 32cee824bb..3bfcdffb90 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -39,10 +39,6 @@ #define CONFIG_VERSATILE 1 /* in Versatile Platform Board */ #define CONFIG_ARCH_VERSATILE 1 /* Specifically, a Versatile */ -#ifndef CONFIG_ARCH_VERSATILE_AB /* AB */ -#define CONFIG_ARCH_VERSATILE_PB /* Versatile PB is default */ -#endif - #define CONFIG_SYS_MEMTEST_START 0x100000 #define CONFIG_SYS_MEMTEST_END 0x10000000 #define CONFIG_SYS_HZ (1000000 / 256) diff --git a/include/configs/vision2.h b/include/configs/vision2.h index 50c920d0b8..b5c73571b3 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -26,7 +26,6 @@ #define CONFIG_MX51 /* in a mx51 */ -#define CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_TEXT_BASE 0x97800000 #include <asm/arch/imx-regs.h> diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h deleted file mode 100644 index c258030e29..0000000000 --- a/include/configs/voiceblue.h +++ /dev/null @@ -1,241 +0,0 @@ -/* - * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl - * - * Configuation settings for the TI OMAP VoiceBlue board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <configs/omap1510.h> - -#define CONFIG_ARM925T 1 /* This is an arm925t CPU */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP1510 1 /* which is in a 5910 */ - -/* Input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz */ -#define CONFIG_XTAL_FREQ 12000000 /* 12MHz */ - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -#define CONFIG_MISC_INIT_R /* There is nothing to really init */ -#define BOARD_LATE_INIT /* but we flash the LEDs here */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x10000000 -#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024) -#define PHYS_FLASH_1 0x0000000 - -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_SECT_SIZE (64 * 1024) -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -#define CONFIG_ENV_OVERWRITE - -/* - * Size of malloc() pool and stack - */ -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) -#define CONFIG_STACKSIZE (1 * 1024 * 1024) - -/* - * Hardware drivers - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ) -#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE - -#define CONFIG_NET_MULTI -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE 0x08000300 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE - -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP1510_I2C - -#define CONFIG_RTC_DS1307 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - - -/* - * Command line configuration - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_RUN - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH - -#define CONFIG_LOOPW - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ -#define CONFIG_SYS_AUTOLOAD "n" -#define CONFIG_BOOTCOMMAND "run nboot" -#define CONFIG_PREBOOT "run setup" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "silent=1\0" \ - "ospart=0\0" \ - "bootfile=/boot/uImage\0" \ - "setpart=" \ - "if test -n $swapos; then " \ - "setenv swapos; saveenv; " \ - "if test $ospart -eq 0; then " \ - "setenv ospart 1; " \ - "else " \ - "setenv ospart 0; " \ - "fi; " \ - "fi\0" \ - "setup=setenv bootargs console=ttyS0,$baudrate " \ - "mtdparts=$mtdparts\0" \ - "nfsargs=setenv bootargs $bootargs " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \ - "nfsroot=$rootpath root=/dev/nfs\0" \ - "flashargs=run setpart; setenv bootargs $bootargs " \ - "root=mtd:data$ospart ro " \ - "rootfstype=jffs2\0" \ - "initrdargs=setenv bootargs $bootargs " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \ - "fboot=run flashargs; chpart data$ospart; fsload; bootm\0" \ - "mboot=bootp; run initrdargs; tftp; bootm\0" \ - "nboot=bootp; run nfsargs; tftp; bootm\0" - -#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ - -#if 1 /* feel free to disable for development */ -#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nVoiceBlue Enterprise - booting...\n" -#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */ -#endif - -/* - * Partitions (mtdparts command line support) - */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=physmap-flash.0" -#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \ - "256k(u-boot),64k(env),64k(r_env),16192k(data0),-(data1)" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "# " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1) -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \ - (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)) -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x400000) - -/* - * The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. - * This time is further subdivided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE -#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */ -#define CONFIG_SYS_HZ 1000 - -#define OMAP5910_DPLL_DIV 1 -#define OMAP5910_DPLL_MUL \ - ((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ) - -#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */ -#define OMAP5910_LCD_DIV 2 /* CKL/4 */ -#define OMAP5910_ARM_DIV 0 /* CKL/1 */ -#define OMAP5910_DSP_DIV 0 /* CKL/1 */ -#define OMAP5910_TC_DIV 1 /* CKL/2 */ -#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */ -#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */ - -#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b Clock Enable */ -#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \ - (OMAP5910_LCD_DIV << 2) | \ - (OMAP5910_ARM_DIV << 4) | \ - (OMAP5910_DSP_DIV << 6) | \ - (OMAP5910_TC_DIV << 8) | \ - (OMAP5910_DSP_MMU_DIV << 10) | \ - (OMAP5910_ARM_TIM_SEL << 12)) - -#define VOICEBLUE_LED_REG 0x04030000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index 35afcd356c..ea779716f2 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -51,7 +51,6 @@ #define CONFIG_BOOTDELAY 2 /* Autoboot delay */ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_TEXT_BASE 0x0 #define CONFIG_LZMA /* LZMA compression support */ /* diff --git a/mmc_spl/board/samsung/smdkv310/Makefile b/mmc_spl/board/samsung/smdkv310/Makefile index fdfd015cf6..85f48380d5 100644 --- a/mmc_spl/board/samsung/smdkv310/Makefile +++ b/mmc_spl/board/samsung/smdkv310/Makefile @@ -34,6 +34,7 @@ include $(TOPDIR)/config.mk LDSCRIPT= $(TOPDIR)/mmc_spl/board/$(BOARDDIR)/u-boot.lds LDFLAGS = -Bstatic -T $(mmcobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS) AFLAGS += -DCONFIG_MMC_SPL +AFLAGS += -DCONFIG_SPL_BUILD CFLAGS += -DCONFIG_MMC_SPL CFLAGS += -DCONFIG_SPL_BUILD diff --git a/mmc_spl/board/samsung/smdkv310/mmc_boot.c b/mmc_spl/board/samsung/smdkv310/mmc_boot.c index 566f34eb02..2f3e463bce 100644 --- a/mmc_spl/board/samsung/smdkv310/mmc_boot.c +++ b/mmc_spl/board/samsung/smdkv310/mmc_boot.c @@ -54,32 +54,6 @@ void board_init_r(gd_t *id, ulong dest_addr) ; } -void do_undefined_instruction(struct pt_regs *pt_regs) +void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) { } - -void do_software_interrupt(struct pt_regs *pt_regs) -{ -} - -void do_prefetch_abort(struct pt_regs *pt_regs) -{ -} - -void do_data_abort(struct pt_regs *pt_regs) -{ -} - -void do_not_used(struct pt_regs *pt_regs) -{ -} - -void do_fiq(struct pt_regs *pt_regs) -{ -} - -#ifndef CONFIG_USE_IRQ -void do_irq(struct pt_regs *pt_regs) -{ -} -#endif diff --git a/mmc_spl/board/samsung/smdkv310/tools/mkv310_image.c b/mmc_spl/board/samsung/smdkv310/tools/mkv310_image.c index b98f23390f..1a51913f59 100644 --- a/mmc_spl/board/samsung/smdkv310/tools/mkv310_image.c +++ b/mmc_spl/board/samsung/smdkv310/tools/mkv310_image.c @@ -26,6 +26,7 @@ #include <fcntl.h> #include <errno.h> #include <string.h> +#include <sys/stat.h> #define CHECKSUM_OFFSET (14*1024-4) #define BUFSIZE (16*1024) diff --git a/mmc_spl/board/samsung/smdkv310/u-boot.lds b/mmc_spl/board/samsung/smdkv310/u-boot.lds index 61cd16a71c..4a231d9df3 100644 --- a/mmc_spl/board/samsung/smdkv310/u-boot.lds +++ b/mmc_spl/board/samsung/smdkv310/u-boot.lds @@ -58,6 +58,8 @@ SECTIONS . = ALIGN(4); + __image_copy_end = .; + .rel.dyn : { __rel_dyn_start = .; *(.rel*) diff --git a/spl/Makefile b/spl/Makefile index 87f13f600f..95ecce1563 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -93,8 +93,18 @@ endif ALL-y += $(obj)u-boot-spl.bin +ifdef CONFIG_SAMSUNG +ALL-y += $(obj)$(BOARD)-spl.bin +endif + all: $(ALL-y) +ifdef CONFIG_SAMSUNG +$(obj)$(BOARD)-spl.bin: $(obj)u-boot-spl.bin + $(TOPDIR)/board/$(BOARDDIR)/tools/mk$(BOARD)spl.exe \ + $(obj)u-boot-spl.bin $(obj)$(BOARD)-spl.bin +endif + $(obj)u-boot-spl.bin: $(obj)u-boot-spl $(OBJCOPY) $(OBJCFLAGS) -O binary $< $@ diff --git a/tools/omapimage.c b/tools/omapimage.c index 29d91cc69c..5e739ac647 100644 --- a/tools/omapimage.c +++ b/tools/omapimage.c @@ -49,7 +49,6 @@ static int omapimage_check_image_types(uint8_t type) if (type == IH_TYPE_OMAPIMAGE) return EXIT_SUCCESS; else { - fprintf(stderr, "Unknown OMAP image type - %x", type); return EXIT_FAILURE; } } |