summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMarcel Ziswiler <marcel.ziswiler@toradex.com>2019-02-08 18:42:14 +0100
committerStefano Babic <sbabic@denx.de>2019-04-13 20:30:09 +0200
commitd141b75cbf628a1e16eeeda43b44bee1845b65bd (patch)
treef885fb96ad7e20da7badecf7c0083565da7f3836
parent5e9d73967388a66e7418f4abcd21459984bdae7e (diff)
colibri_imx6: migrate mmc to using driver model
Migrate MMC to using driver model. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
-rw-r--r--board/toradex/colibri_imx6/colibri_imx6.c38
-rw-r--r--configs/colibri_imx6_defconfig1
2 files changed, 5 insertions, 34 deletions
diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c
index 0131d9a635..1238474d7e 100644
--- a/board/toradex/colibri_imx6/colibri_imx6.c
+++ b/board/toradex/colibri_imx6/colibri_imx6.c
@@ -77,6 +77,7 @@ iomux_v3_cfg_t const uart1_pads[] = {
MX6_PAD_CSI0_DAT11__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
};
+#if defined(CONFIG_FSL_ESDHC) && defined(CONFIG_SPL_BUILD)
/* Colibri MMC */
iomux_v3_cfg_t const usdhc1_pads[] = {
MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -103,6 +104,7 @@ iomux_v3_cfg_t const usdhc3_pads[] = {
MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL),
};
+#endif /* CONFIG_FSL_ESDHC & CONFIG_SPL_BUILD */
iomux_v3_cfg_t const enet_pads[] = {
MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -310,7 +312,7 @@ int board_ehci_power(int port, int on)
}
#endif /* CONFIG_USB_EHCI_MX6 */
-#ifdef CONFIG_FSL_ESDHC
+#if defined(CONFIG_FSL_ESDHC) && defined(CONFIG_SPL_BUILD)
/* use the following sequence: eMMC, MMC */
struct fsl_esdhc_cfg usdhc_cfg[CONFIG_SYS_FSL_USDHC_NUM] = {
{USDHC3_BASE_ADDR},
@@ -335,37 +337,6 @@ int board_mmc_getcd(struct mmc *mmc)
int board_mmc_init(bd_t *bis)
{
-#ifndef CONFIG_SPL_BUILD
- s32 status = 0;
- u32 index = 0;
-
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
-
- usdhc_cfg[0].max_bus_width = 8;
- usdhc_cfg[1].max_bus_width = 4;
-
- for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
- switch (index) {
- case 0:
- imx_iomux_v3_setup_multiple_pads(
- usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
- break;
- case 1:
- imx_iomux_v3_setup_multiple_pads(
- usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
- break;
- default:
- printf("Warning: you configured more USDHC controllers (%d) then supported by the board (%d)\n",
- index + 1, CONFIG_SYS_FSL_USDHC_NUM);
- return status;
- }
-
- status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
- }
-
- return status;
-#else /* !CONFIG_SPL_BUILD */
struct src *psrc = (struct src *)SRC_BASE_ADDR;
unsigned reg = readl(&psrc->sbmr1) >> 11;
/*
@@ -397,9 +368,8 @@ int board_mmc_init(bd_t *bis)
}
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
-#endif /* !CONFIG_SPL_BUILD */
}
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC & CONFIG_SPL_BUILD */
int board_phy_config(struct phy_device *phydev)
{
diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
index 6fd050a99f..2ab7db44a8 100644
--- a/configs/colibri_imx6_defconfig
+++ b/configs/colibri_imx6_defconfig
@@ -54,6 +54,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_DFU_MMC=y
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y