Add config option for disabling DM9000-SROM support.

Some boards do not have SROM support for the DM9000 network adapter.
Instead of listing these board names in the driver code, make this
option configurable from the board config file.

It also removes a build warning for the at91sam9261ek board:
'dm9000x.c:545: warning: 'read_srom_word' defined but not used'

And it repaires the trizepsiv board build which was broken around the
same routines

Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

4 files changed, 36 insertions, 15 deletions

diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c
index 63f1c6cdf7..9fa7aef9a2 100644
--- a/board/trizepsiv/eeprom.c
+++ b/board/trizepsiv/eeprom.c
@@ -23,17 +23,17 @@
 
 #include <common.h>
 #include <command.h>
-
-extern u16 read_srom_word(int);
-extern void write_srom_word(int offset, u16 val);
+#include <dm9000.h>
 
 static int do_read_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) {
-	int i;
+	unsigned int i;
+	u8 data[2];
 
 	for (i=0; i < 0x40; i++) {
 		if (!(i % 0x10))
-			printf("\n%08lx:", i);
-		printf(" %04x", read_srom_word(i));
+			printf("\n%08x:", i);
+		dm9000_read_srom_word(i, data);
+		printf(" %02x%02x", data[1], data[0]);
 	}
 	printf ("\n");
 	return (0);
@@ -54,7 +54,7 @@ static int do_write_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *
 		cmd_usage(cmdtp);
 		return 1;
 	}
-	write_srom_word(offset, value);
+	dm9000_write_srom_word(offset, value);
 	return (0);
 }
 
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 8ca2bf715c..f1394354eb 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -53,7 +53,7 @@ v1.2   03/18/2003       Weilun Huang <weilun_huang@davicom.com.tw>:
 			  notes (i.e. double reset)
 			- some minor code cleanups
 			These changes are tested with DM9000{A,EP,E} together
-			with a 200MHz Atmel AT91SAM92161 core
+			with a 200MHz Atmel AT91SAM9261 core
 
 TODO: external MII is not functional, only internal at the moment.
 */
@@ -62,6 +62,7 @@ TODO: external MII is not functional, only internal at the moment.
 #include <command.h>
 #include <net.h>
 #include <asm/io.h>
+#include <dm9000.h>
 
 #include "dm9000x.h"
 
@@ -113,7 +114,6 @@ void eth_halt(void);
 static int dm9000_probe(void);
 static u16 phy_read(int);
 static void phy_write(int, u16);
-static void read_srom_word(int, u8 *);
 static u8 DM9000_ior(int);
 static void DM9000_iow(int reg, u8 value);
 
@@ -347,9 +347,9 @@ eth_init(bd_t * bd)
 
 	/* Set Node address */
 	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
-#if !defined(CONFIG_AT91SAM9261EK)
+#if !defined(CONFIG_DM9000_NO_SROM)
 		for (i = 0; i < 3; i++)
-			read_srom_word(i, enetaddr + 2 * i);
+			dm9000_read_srom_word(i, enetaddr + 2 * i);
 		eth_setenv_enetaddr("ethaddr", enetaddr);
 #endif
 	}
@@ -541,7 +541,8 @@ eth_rx(void)
 /*
   Read a word data from SROM
 */
-static void read_srom_word(int offset, u8 *to)
+#if !defined(CONFIG_DM9000_NO_SROM)
+void dm9000_read_srom_word(int offset, u8 *to)
 {
 	DM9000_iow(DM9000_EPAR, offset);
 	DM9000_iow(DM9000_EPCR, 0x4);
@@ -551,8 +552,7 @@ static void read_srom_word(int offset, u8 *to)
 	to[1] = DM9000_ior(DM9000_EPDRH);
 }
 
-void
-write_srom_word(int offset, u16 val)
+void dm9000_write_srom_word(int offset, u16 val)
 {
 	DM9000_iow(DM9000_EPAR, offset);
 	DM9000_iow(DM9000_EPDRH, ((val >> 8) & 0xff));
@@ -561,7 +561,7 @@ write_srom_word(int offset, u16 val)
 	udelay(8000);
 	DM9000_iow(DM9000_EPCR, 0);
 }
-
+#endif
 
 /*
    Read a byte from I/O port
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index fdaa71cfcc..9621b7cb32 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -137,6 +137,7 @@
 #define DM9000_IO			CONFIG_DM9000_BASE
 #define DM9000_DATA			(CONFIG_DM9000_BASE + 4)
 #define CONFIG_DM9000_USE_16BIT		1
+#define CONFIG_DM9000_NO_SROM		1
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_RESET_PHY_R		1
 
diff --git a/include/dm9000.h b/include/dm9000.h
new file mode 100644
index 0000000000..76f9bfde70
--- /dev/null
+++ b/include/dm9000.h
@@ -0,0 +1,20 @@
+/*
+ * NOTE:        DAVICOM DM9000 ethernet driver interface
+ *
+ * Authors:     Remy Bohmer <linux@bohmer.net>
+ *
+ *              This program is free software; you can redistribute it and/or
+ *              modify it under the terms of the GNU General Public License
+ *              as published by the Free Software Foundation; either version
+ *              2 of the License, or (at your option) any later version.
+ */
+#ifndef __DM9000_H__
+#define __DM9000_H__
+
+/******************  function prototypes **********************/
+#if !defined(CONFIG_DM9000_NO_SROM)
+void dm9000_write_srom_word(int offset, u16 val);
+void dm9000_read_srom_word(int offset, u8 *to);
+#endif
+
+#endif /* __DM9000_H__ */