diff options
| -rw-r--r-- | board/trizepsiv/eeprom.c | 14 | ||||
| -rw-r--r-- | drivers/net/dm9000x.c | 16 | ||||
| -rw-r--r-- | include/configs/at91sam9261ek.h | 1 | ||||
| -rw-r--r-- | include/dm9000.h | 20 |
4 files changed, 36 insertions, 15 deletions
diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c index 63f1c6cdf7..9fa7aef9a2 100644 --- a/board/trizepsiv/eeprom.c +++ b/board/trizepsiv/eeprom.c @@ -23,17 +23,17 @@ #include <common.h> #include <command.h> - -extern u16 read_srom_word(int); -extern void write_srom_word(int offset, u16 val); +#include <dm9000.h> static int do_read_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - int i; + unsigned int i; + u8 data[2]; for (i=0; i < 0x40; i++) { if (!(i % 0x10)) - printf("\n%08lx:", i); - printf(" %04x", read_srom_word(i)); + printf("\n%08x:", i); + dm9000_read_srom_word(i, data); + printf(" %02x%02x", data[1], data[0]); } printf ("\n"); return (0); @@ -54,7 +54,7 @@ static int do_write_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * cmd_usage(cmdtp); return 1; } - write_srom_word(offset, value); + dm9000_write_srom_word(offset, value); return (0); } diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c index 8ca2bf715c..f1394354eb 100644 --- a/drivers/net/dm9000x.c +++ b/drivers/net/dm9000x.c @@ -53,7 +53,7 @@ v1.2 03/18/2003 Weilun Huang <weilun_huang@davicom.com.tw>: notes (i.e. double reset) - some minor code cleanups These changes are tested with DM9000{A,EP,E} together - with a 200MHz Atmel AT91SAM92161 core + with a 200MHz Atmel AT91SAM9261 core TODO: external MII is not functional, only internal at the moment. */ @@ -62,6 +62,7 @@ TODO: external MII is not functional, only internal at the moment. #include <command.h> #include <net.h> #include <asm/io.h> +#include <dm9000.h> #include "dm9000x.h" @@ -113,7 +114,6 @@ void eth_halt(void); static int dm9000_probe(void); static u16 phy_read(int); static void phy_write(int, u16); -static void read_srom_word(int, u8 *); static u8 DM9000_ior(int); static void DM9000_iow(int reg, u8 value); @@ -347,9 +347,9 @@ eth_init(bd_t * bd) /* Set Node address */ if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { -#if !defined(CONFIG_AT91SAM9261EK) +#if !defined(CONFIG_DM9000_NO_SROM) for (i = 0; i < 3; i++) - read_srom_word(i, enetaddr + 2 * i); + dm9000_read_srom_word(i, enetaddr + 2 * i); eth_setenv_enetaddr("ethaddr", enetaddr); #endif } @@ -541,7 +541,8 @@ eth_rx(void) /* Read a word data from SROM */ -static void read_srom_word(int offset, u8 *to) +#if !defined(CONFIG_DM9000_NO_SROM) +void dm9000_read_srom_word(int offset, u8 *to) { DM9000_iow(DM9000_EPAR, offset); DM9000_iow(DM9000_EPCR, 0x4); @@ -551,8 +552,7 @@ static void read_srom_word(int offset, u8 *to) to[1] = DM9000_ior(DM9000_EPDRH); } -void -write_srom_word(int offset, u16 val) +void dm9000_write_srom_word(int offset, u16 val) { DM9000_iow(DM9000_EPAR, offset); DM9000_iow(DM9000_EPDRH, ((val >> 8) & 0xff)); @@ -561,7 +561,7 @@ write_srom_word(int offset, u16 val) udelay(8000); DM9000_iow(DM9000_EPCR, 0); } - +#endif /* Read a byte from I/O port diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index fdaa71cfcc..9621b7cb32 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -137,6 +137,7 @@ #define DM9000_IO CONFIG_DM9000_BASE #define DM9000_DATA (CONFIG_DM9000_BASE + 4) #define CONFIG_DM9000_USE_16BIT 1 +#define CONFIG_DM9000_NO_SROM 1 #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_RESET_PHY_R 1 diff --git a/include/dm9000.h b/include/dm9000.h new file mode 100644 index 0000000000..76f9bfde70 --- /dev/null +++ b/include/dm9000.h @@ -0,0 +1,20 @@ +/* + * NOTE: DAVICOM DM9000 ethernet driver interface + * + * Authors: Remy Bohmer <linux@bohmer.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __DM9000_H__ +#define __DM9000_H__ + +/****************** function prototypes **********************/ +#if !defined(CONFIG_DM9000_NO_SROM) +void dm9000_write_srom_word(int offset, u16 val); +void dm9000_read_srom_word(int offset, u8 *to); +#endif + +#endif /* __DM9000_H__ */ |