diff options
| author | Kever Yang <kever.yang@rock-chips.com> | 2017-06-08 15:32:04 +0800 |
|---|---|---|
| committer | Philipp Tomsich <philipp.tomsich@theobroma-systems.com> | 2017-07-11 15:23:38 +0200 |
| commit | fe450895ff1a828d39bfd09082000149f2c8d9c3 (patch) | |
| tree | ce752090d97e752f667445592a79eb59a40edd4e | |
| parent | a84b589e5dc3b274f0fde25e89ed8401adefdce7 (diff) | |
rockchip: pinctrl: rk3328: use gpio instead of sdmmc-pwren
SDMMC-PWREN is a pin to control voltage for SDMMC IO, it may
be high active or low active, the dwmmc driver always assume
the sdmmc-pwren as high active.
Kernel treat this pin as fixed regulator instead of a pin from
controller, and then it can set in dts file upon board schematic,
that's a good solution, we can also do this in u-boot.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
| -rw-r--r-- | drivers/pinctrl/rockchip/pinctrl_rk3328.c | 6 |
1 files changed, 2 insertions, 4 deletions
diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3328.c b/drivers/pinctrl/rockchip/pinctrl_rk3328.c index efa5b3105c..c74163e026 100644 --- a/drivers/pinctrl/rockchip/pinctrl_rk3328.c +++ b/drivers/pinctrl/rockchip/pinctrl_rk3328.c @@ -184,13 +184,11 @@ static void pinctrl_rk3328_sdmmc_config(struct rk3328_grf_regs *grf, if (com_iomux & IOMUX_SEL_SDMMC_MASK) rk_clrsetreg(&grf->gpio0d_iomux, GPIO0D6_SEL_MASK, - GPIO0D6_SDMMC0_PWRENM1 - << GPIO0D6_SEL_SHIFT); + GPIO0D6_GPIO << GPIO0D6_SEL_SHIFT); else rk_clrsetreg(&grf->gpio2a_iomux, GPIO2A7_SEL_MASK, - GPIO2A7_SDMMC0_PWRENM0 - << GPIO2A7_SEL_SHIFT); + GPIO2A7_GPIO << GPIO2A7_SEL_SHIFT); rk_clrsetreg(&grf->gpio1a_iomux, GPIO1A0_SEL_MASK, GPIO1A0_CARD_DATA_CLK_CMD_DETN |