diff options
| author | Peng Fan <peng.fan@nxp.com> | 2016-12-11 19:24:37 +0800 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2016-12-16 11:38:24 +0100 |
| commit | 47f73504d8a826a7a0c54aed974ff5457aa4c8b8 (patch) | |
| tree | 0954ef8347162fa0f82edbc888d0313ef83a853e /arch/arm/cpu/armv7/mx6 | |
| parent | 3445373691bae4f2000b26df091a406f395df01d (diff) | |
arm: imx: add i.MX6SLL EVK board support
Add i.MX6SLL EVK board support.
1. Add imx6sll-evk device tree.
2. Enable SDHC/I2C/UART.
3. Enable REGULATOR/PMIC/I2C/GPIO/SDHC/PINCTRL driver.
Boot Log:
U-Boot 2016.11-00127-gc635871-dirty (Nov 24 2016 - 13:28:19 +0800)
CPU: Freescale i.MX6SLL rev1.0 at 792MHz
CPU: Commercial temperature grade (0C to 95C)Reset cause: POR
Model: Freescale i.MX6SLL EVK Board
Board: MX6SLL EVK
DRAM: 2 GiB
i2c bus 0 at 35258368, no gpio pinctrl state.
PMIC: PFUZE100! DEV_ID=0x10 REV_ID=0x21
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
In: serial
Out: serial
Err: serial
Net: CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot: 0
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'arch/arm/cpu/armv7/mx6')
| -rw-r--r-- | arch/arm/cpu/armv7/mx6/Kconfig | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig index ba33d4cc56..eefe629187 100644 --- a/arch/arm/cpu/armv7/mx6/Kconfig +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -146,6 +146,12 @@ config TARGET_MX6SLEVK bool "mx6slevk" select SUPPORT_SPL +config TARGET_MX6SLLEVK + bool "mx6sll evk" + select MX6SLL + select DM + select DM_THERMAL + config TARGET_MX6SXSABRESD bool "mx6sxsabresd" select MX6SX @@ -283,6 +289,7 @@ source "board/freescale/mx6qarm2/Kconfig" source "board/freescale/mx6qsabreauto/Kconfig" source "board/freescale/mx6sabresd/Kconfig" source "board/freescale/mx6slevk/Kconfig" +source "board/freescale/mx6sllevk/Kconfig" source "board/freescale/mx6sxsabresd/Kconfig" source "board/freescale/mx6sxsabreauto/Kconfig" source "board/freescale/mx6ul_14x14_evk/Kconfig" |