Merge branch 'master' of git://git.denx.de/u-boot

13 files changed, 0 insertions, 706 deletions

diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
deleted file mode 100644
index 72f46636fd..0000000000
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
-obj-y += bcu_init.o sbc_init.o sg_init.o pll_init.o clkrst_init.o \
-	pll_spectrum.o umc_init.o ddrphy_init.o
-else
-obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o
-obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
-endif
-
-obj-y += boot-mode.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c
deleted file mode 100644
index 85f37f299b..0000000000
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/bcu_init.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (C) 2011-2014 Panasonic Corporation
- *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/bcu-regs.h>
-
-#define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x))
-
-void bcu_init(void)
-{
-	int shift;
-
-	writel(0x44444444, BCSCR0); /* 0x20000000-0x3fffffff: ASM bus */
-	writel(0x11111111, BCSCR2); /* 0x80000000-0x9fffffff: IPPC/IPPD-bus */
-	writel(0x11111111, BCSCR3); /* 0xa0000000-0xbfffffff: IPPC/IPPD-bus */
-	writel(0x11111111, BCSCR4); /* 0xc0000000-0xdfffffff: IPPC/IPPD-bus */
-	writel(0x11111111, BCSCR5); /* 0xe0000000-0Xffffffff: IPPC/IPPD-bus */
-
-	/* Specify DDR channel */
-	shift = (CONFIG_SDRAM1_BASE - CONFIG_SDRAM0_BASE) / 0x04000000 * 4;
-	writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */
-
-	shift -= 32;
-	writel(ch(shift), BCIPPCCHR3); /* 0xa0000000-0xbfffffff */
-
-	shift -= 32;
-	writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */
-}
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c
deleted file mode 100644
index d359b56291..0000000000
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/boot-mode.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../ph1-pro4/boot-mode.c"
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c
deleted file mode 100644
index 18965a94c5..0000000000
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2011-2014 Panasonic Corporation
- *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/sc-regs.h>
-
-void clkrst_init(void)
-{
-	u32 tmp;
-
-	/* deassert reset */
-	tmp = readl(SC_RSTCTRL);
-	tmp |= SC_RSTCTRL_NRST_ETHER | SC_RSTCTRL_NRST_UMC1
-		| SC_RSTCTRL_NRST_UMC0 | SC_RSTCTRL_NRST_NAND;
-	writel(tmp, SC_RSTCTRL);
-	readl(SC_RSTCTRL); /* dummy read */
-
-	/* privide clocks */
-	tmp = readl(SC_CLKCTRL);
-	tmp |= SC_CLKCTRL_CLK_ETHER | SC_CLKCTRL_CLK_MIO | SC_CLKCTRL_CLK_UMC
-	     | SC_CLKCTRL_CLK_NAND | SC_CLKCTRL_CLK_SBC | SC_CLKCTRL_CLK_PERI;
-	writel(tmp, SC_CLKCTRL);
-	readl(SC_CLKCTRL); /* dummy read */
-}
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/ddrphy_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/ddrphy_init.c
deleted file mode 100644
index 60fc5ad6ea..0000000000
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/ddrphy_init.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright (C) 2014 Panasonic Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/arch/ddrphy-regs.h>
-
-void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
-{
-	u32 tmp;
-
-	writel(0x0300c473, &phy->pgcr[1]);
-	if (freq == 1333) {
-		writel(0x0a806844, &phy->ptr[0]);
-		writel(0x208e0124, &phy->ptr[1]);
-	} else {
-		writel(0x0c807d04, &phy->ptr[0]);
-		writel(0x2710015E, &phy->ptr[1]);
-	}
-	writel(0x00083DEF, &phy->ptr[2]);
-	if (freq == 1333) {
-		writel(0x0f051616, &phy->ptr[3]);
-		writel(0x06ae08d6, &phy->ptr[4]);
-	} else {
-		writel(0x12061A80, &phy->ptr[3]);
-		writel(0x08027100, &phy->ptr[4]);
-	}
-	writel(0xF004001A, &phy->dsgcr);
-
-	/* change the value of the on-die pull-up/pull-down registors */
-	tmp = readl(&phy->dxccr);
-	tmp &= ~0x0ee0;
-	tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM;
-	writel(tmp, &phy->dxccr);
-
-	writel(0x0000040B, &phy->dcr);
-	if (freq == 1333) {
-		writel(0x85589955, &phy->dtpr[0]);
-		if (size == 1)
-			writel(0x1a8253c0, &phy->dtpr[1]);
-		else
-			writel(0x1a8363c0, &phy->dtpr[1]);
-		writel(0x5002c200, &phy->dtpr[2]);
-		writel(0x00000b51, &phy->mr0);
-	} else {
-		writel(0x999cbb66, &phy->dtpr[0]);
-		if (size == 1)
-			writel(0x1a82dbc0, &phy->dtpr[1]);
-		else
-			writel(0x1a878400, &phy->dtpr[1]);
-		writel(0xa00214f8, &phy->dtpr[2]);
-		writel(0x00000d71, &phy->mr0);
-	}
-	writel(0x00000006, &phy->mr1);
-	if (freq == 1333)
-		writel(0x00000290, &phy->mr2);
-	else
-		writel(0x00000298, &phy->mr2);
-
-	writel(0x00000800, &phy->mr3);
-
-	while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE))
-		;
-
-	writel(0x0300C473, &phy->pgcr[1]);
-	writel(0x0000005D, &phy->zq[0].cr[1]);
-}
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S b/arch/arm/cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S
deleted file mode 100644
index c0778a0abb..0000000000
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * On-chip UART initializaion for low-level debugging
- *
- * Copyright (C) 2014 Panasonic Corporation
- *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <linux/linkage.h>
-#include <asm/arch/sg-regs.h>
-
-#define UART_CLK		36864000
-#include <asm/arch/debug-uart.S>
-
-ENTRY(setup_lowlevel_debug)
-		init_debug_uart	r0, r1, r2
-
-		/* UART Port 0 */
-		set_pinsel	85, 1, r0, r1
-		set_pinsel	88, 1, r0, r1
-
-		ldr		r0, =SG_IECTRL
-		ldr		r1, [r0]
-		orr		r1, r1, #1
-		str		r1, [r0]
-
-		mov		pc, lr
-ENDPROC(setup_lowlevel_debug)
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c
deleted file mode 100644
index a7429402f3..0000000000
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pinctrl.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright (C) 2011-2014 Panasonic Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/sg-regs.h>
-
-void pin_init(void)
-{
-	u32 tmp;
-
-	/* Comment format:    PAD Name -> Function Name */
-
-#ifdef CONFIG_UNIPHIER_SERIAL
-	sg_set_pinsel(85, 1);	/* HSDOUT3 -> RXD0 */
-	sg_set_pinsel(88, 1);	/* HDDOUT6 -> TXD0 */
-
-	sg_set_pinsel(69, 23);	/* PCIOWR -> TXD1 */
-	sg_set_pinsel(70, 23);	/* PCIORD -> RXD1 */
-
-	sg_set_pinsel(128, 13);	/* XIRQ6 -> TXD2 */
-	sg_set_pinsel(129, 13);	/* XIRQ7 -> RXD2 */
-
-	sg_set_pinsel(110, 1);	/* SBO0 -> TXD3 */
-	sg_set_pinsel(111, 1);	/* SBI0 -> RXD3 */
-#endif
-
-#ifdef CONFIG_NAND_DENALI
-	sg_set_pinsel(158, 0);	/* XNFRE -> XNFRE_GB */
-	sg_set_pinsel(159, 0);	/* XNFWE -> XNFWE_GB */
-	sg_set_pinsel(160, 0);	/* XFALE -> NFALE_GB */
-	sg_set_pinsel(161, 0);	/* XFCLE -> NFCLE_GB */
-	sg_set_pinsel(162, 0);	/* XNFWP -> XFNWP_GB */
-	sg_set_pinsel(163, 0);	/* XNFCE0 -> XNFCE0_GB */
-	sg_set_pinsel(164, 0);	/* NANDRYBY0 -> NANDRYBY0_GB */
-	sg_set_pinsel(22, 0);	/* MMCCLK  -> XFNCE1_GB */
-	sg_set_pinsel(23, 0);	/* MMCCMD  -> NANDRYBY1_GB */
-	sg_set_pinsel(24, 0);	/* MMCDAT0 -> NFD0_GB */
-	sg_set_pinsel(25, 0);	/* MMCDAT1 -> NFD1_GB */
-	sg_set_pinsel(26, 0);	/* MMCDAT2 -> NFD2_GB */
-	sg_set_pinsel(27, 0);	/* MMCDAT3 -> NFD3_GB */
-	sg_set_pinsel(28, 0);	/* MMCDAT4 -> NFD4_GB */
-	sg_set_pinsel(29, 0);	/* MMCDAT5 -> NFD5_GB */
-	sg_set_pinsel(30, 0);	/* MMCDAT6 -> NFD6_GB */
-	sg_set_pinsel(31, 0);	/* MMCDAT7 -> NFD7_GB */
-#endif
-
-#ifdef CONFIG_USB_EHCI_UNIPHIER
-	sg_set_pinsel(53, 0);	/* USB0VBUS -> USB0VBUS */
-	sg_set_pinsel(54, 0);	/* USB0OD   -> USB0OD */
-	sg_set_pinsel(55, 0);	/* USB1VBUS -> USB1VBUS */
-	sg_set_pinsel(56, 0);	/* USB1OD   -> USB1OD */
-	/* sg_set_pinsel(67, 23); */ /* PCOE -> USB2VBUS */
-	/* sg_set_pinsel(68, 23); */ /* PCWAIT -> USB2OD */
-#endif
-
-	tmp = readl(SG_IECTRL);
-	tmp |= 0x41;
-	writel(tmp, SG_IECTRL);
-}
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c
deleted file mode 100644
index 9d51299308..0000000000
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2014 Panasonic Corporation
- *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm/arch/platdevice.h>
-
-#define UART_MASTER_CLK		36864000
-
-SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK)
-SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
-SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
-SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)
-
-struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = {
-	{
-		.base = 0x5a800100,
-	},
-	{
-		.base = 0x5a810100,
-	},
-	{
-		.base = 0x5a820100,
-	},
-};
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c
deleted file mode 100644
index b83582fee7..0000000000
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Copyright (C) 2011-2014 Panasonic Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/sc-regs.h>
-#include <asm/arch/sg-regs.h>
-
-#undef DPLL_SSC_RATE_1PER
-
-static void dpll_init(void)
-{
-	u32 tmp;
-
-	/*
-	 * Set Frequency
-	 * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz)
-	 * to FOUT (DPLLCTRL.bit[29:20])
-	 */
-	tmp = readl(SC_DPLLCTRL);
-	tmp &= ~0x000f0000;
-#if CONFIG_DDR_FREQ == 1600
-	tmp |= 0x000c0000;
-#elif CONFIG_DDR_FREQ == 1333
-	tmp |= 0x000d0000;
-#else
-# error "Unknown frequency"
-#endif
-
-#if defined(DPLL_SSC_RATE_1PER)
-	tmp &= ~SC_DPLLCTRL_SSC_RATE;
-#else
-	tmp |= SC_DPLLCTRL_SSC_RATE;
-#endif
-	writel(tmp, SC_DPLLCTRL);
-
-	tmp = readl(SC_DPLLCTRL2);
-	tmp |= SC_DPLLCTRL2_NRSTDS;
-	writel(tmp, SC_DPLLCTRL2);
-}
-
-static void upll_init(void)
-{
-	u32 tmp, clk_mode_upll, clk_mode_axosel;
-
-	tmp = readl(SG_PINMON0);
-	clk_mode_upll   = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK;
-	clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
-
-	/* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */
-	tmp = readl(SC_UPLLCTRL);
-	tmp &= ~0x18000000;
-	writel(tmp, SC_UPLLCTRL);
-
-	if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) {
-		if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
-		    clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
-			/* AXO: 25MHz */
-			tmp &= ~0x07ffffff;
-			tmp |= 0x0228f5c0;
-		} else {
-			/* AXO: default 24.576MHz */
-			tmp &= ~0x07ffffff;
-			tmp |= 0x02328000;
-		}
-	}
-
-	writel(tmp, SC_UPLLCTRL);
-
-	/* set 1 to K_LD(UPLLCTRL.bit[27]) */
-	tmp |= 0x08000000;
-	writel(tmp, SC_UPLLCTRL);
-
-	/* wait 10 usec */
-	udelay(10);
-
-	/* set 1 to SNRT(UPLLCTRL.bit[28]) */
-	tmp |= 0x10000000;
-	writel(tmp, SC_UPLLCTRL);
-}
-
-static void vpll_init(void)
-{
-	u32 tmp, clk_mode_axosel;
-
-	tmp = readl(SG_PINMON0);
-	clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
-
-	/* set 1 to VPLA27WP and VPLA27WP */
-	tmp = readl(SC_VPLL27ACTRL);
-	tmp |= 0x00000001;
-	writel(tmp, SC_VPLL27ACTRL);
-	tmp = readl(SC_VPLL27BCTRL);
-	tmp |= 0x00000001;
-	writel(tmp, SC_VPLL27BCTRL);
-
-	/* Set 0 to VPLA_K_LD and VPLB_K_LD */
-	tmp = readl(SC_VPLL27ACTRL3);
-	tmp &= ~0x10000000;
-	writel(tmp, SC_VPLL27ACTRL3);
-	tmp = readl(SC_VPLL27BCTRL3);
-	tmp &= ~0x10000000;
-	writel(tmp, SC_VPLL27BCTRL3);
-
-	/* Set 0 to VPLA_SNRST and VPLB_SNRST */
-	tmp = readl(SC_VPLL27ACTRL2);
-	tmp &= ~0x10000000;
-	writel(tmp, SC_VPLL27ACTRL2);
-	tmp = readl(SC_VPLL27BCTRL2);
-	tmp &= ~0x10000000;
-	writel(tmp, SC_VPLL27BCTRL2);
-
-	/* Set 0x20 to VPLA_SNRST and VPLB_SNRST */
-	tmp = readl(SC_VPLL27ACTRL2);
-	tmp &= ~0x0000007f;
-	tmp |= 0x00000020;
-	writel(tmp, SC_VPLL27ACTRL2);
-	tmp = readl(SC_VPLL27BCTRL2);
-	tmp &= ~0x0000007f;
-	tmp |= 0x00000020;
-	writel(tmp, SC_VPLL27BCTRL2);
-
-	if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
-	    clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
-		/* AXO: 25MHz */
-		tmp = readl(SC_VPLL27ACTRL3);
-		tmp &= ~0x000fffff;
-		tmp |= 0x00066664;
-		writel(tmp, SC_VPLL27ACTRL3);
-		tmp = readl(SC_VPLL27BCTRL3);
-		tmp &= ~0x000fffff;
-		tmp |= 0x00066664;
-		writel(tmp, SC_VPLL27BCTRL3);
-	} else {
-		/* AXO: default 24.576MHz */
-		tmp = readl(SC_VPLL27ACTRL3);
-		tmp &= ~0x000fffff;
-		tmp |= 0x000f5800;
-		writel(tmp, SC_VPLL27ACTRL3);
-		tmp = readl(SC_VPLL27BCTRL3);
-		tmp &= ~0x000fffff;
-		tmp |= 0x000f5800;
-		writel(tmp, SC_VPLL27BCTRL3);
-	}
-
-	/* Set 1 to VPLA_K_LD and VPLB_K_LD */
-	tmp = readl(SC_VPLL27ACTRL3);
-	tmp |= 0x10000000;
-	writel(tmp, SC_VPLL27ACTRL3);
-	tmp = readl(SC_VPLL27BCTRL3);
-	tmp |= 0x10000000;
-	writel(tmp, SC_VPLL27BCTRL3);
-
-	/* wait 10 usec */
-	udelay(10);
-
-	/* Set 0 to VPLA_SNRST and VPLB_SNRST */
-	tmp = readl(SC_VPLL27ACTRL2);
-	tmp |= 0x10000000;
-	writel(tmp, SC_VPLL27ACTRL2);
-	tmp = readl(SC_VPLL27BCTRL2);
-	tmp |= 0x10000000;
-	writel(tmp, SC_VPLL27BCTRL2);
-
-	/* set 0 to VPLA27WP and VPLA27WP */
-	tmp = readl(SC_VPLL27ACTRL);
-	tmp &= ~0x00000001;
-	writel(tmp, SC_VPLL27ACTRL);
-	tmp = readl(SC_VPLL27BCTRL);
-	tmp |= ~0x00000001;
-	writel(tmp, SC_VPLL27BCTRL);
-}
-
-void pll_init(void)
-{
-	dpll_init();
-	upll_init();
-	vpll_init();
-
-	/*
-	 * Wait 500 usec until dpll get stable
-	 * We wait 10 usec in upll_init() and vpll_init()
-	 * so 20 usec can be saved here.
-	 */
-	udelay(480);
-}
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c
deleted file mode 100644
index 837b2a891b..0000000000
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_spectrum.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../ph1-pro4/pll_spectrum.c"
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c
deleted file mode 100644
index 4839c943c7..0000000000
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2011-2014 Panasonic Corporation
- *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/sbc-regs.h>
-#include <asm/arch/sg-regs.h>
-
-void sbc_init(void)
-{
-	u32 tmp;
-
-	/* system bus output enable */
-	tmp = readl(PC0CTRL);
-	tmp &= 0xfffffcff;
-	writel(tmp, PC0CTRL);
-
-	/* XECS1: sub/boot memory (boot swap = off/on) */
-	writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10);
-	writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11);
-	writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12);
-	writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14);
-
-#if !defined(CONFIG_SPL_BUILD)
-	/* XECS0: boot/sub memory (boot swap = off/on) */
-	writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00);
-	writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01);
-	writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02);
-	writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04);
-#endif
-	/* XECS3: peripherals */
-	writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30);
-	writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31);
-	writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32);
-	writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34);
-
-	/* base address regsiters */
-	writel(0x0000bc01, SBBASE0);
-	writel(0x0400bc01, SBBASE1);
-	writel(0x0800bf01, SBBASE3);
-
-#if !defined(CONFIG_SPL_BUILD)
-	/* enable access to sub memory when boot swap is on */
-	sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */
-#endif
-	sg_set_pinsel(156, 1); /* PORT25 -> XECS3 */
-}
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c
deleted file mode 100644
index 2cc5df608f..0000000000
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) 2011-2014 Panasonic Corporation
- *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/sg-regs.h>
-
-void sg_init(void)
-{
-	u32 tmp;
-
-	/* Set DDR size */
-	tmp = sg_memconf_val_ch0(CONFIG_SDRAM0_SIZE, CONFIG_DDR_NUM_CH0);
-	tmp |= sg_memconf_val_ch1(CONFIG_SDRAM1_SIZE, CONFIG_DDR_NUM_CH1);
-#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE < CONFIG_SDRAM1_BASE
-	tmp |= SG_MEMCONF_SPARSEMEM;
-#endif
-	writel(tmp, SG_MEMCONF);
-
-	/* Input ports must be enabled before deasserting reset of cores */
-	tmp = readl(SG_IECTRL);
-	tmp |= 0x1;
-	writel(tmp, SG_IECTRL);
-}
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c
deleted file mode 100644
index bbc3dcb3da..0000000000
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (C) 2011-2014 Panasonic Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/umc-regs.h>
-#include <asm/arch/ddrphy-regs.h>
-
-static void umc_start_ssif(void __iomem *ssif_base)
-{
-	writel(0x00000000, ssif_base + 0x0000b004);
-	writel(0xffffffff, ssif_base + 0x0000c004);
-	writel(0x000fffcf, ssif_base + 0x0000c008);
-	writel(0x00000001, ssif_base + 0x0000b000);
-	writel(0x00000001, ssif_base + 0x0000c000);
-	writel(0x03010101, ssif_base + UMC_MDMCHSEL);
-	writel(0x03010100, ssif_base + UMC_DMDCHSEL);
-
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC);
-	writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST);
-
-	writel(0x00000001, ssif_base + UMC_CPURST);
-	writel(0x00000001, ssif_base + UMC_IDSRST);
-	writel(0x00000001, ssif_base + UMC_IXMRST);
-	writel(0x00000001, ssif_base + UMC_MDMRST);
-	writel(0x00000001, ssif_base + UMC_MDDRST);
-	writel(0x00000001, ssif_base + UMC_SIORST);
-	writel(0x00000001, ssif_base + UMC_VIORST);
-	writel(0x00000001, ssif_base + UMC_FRCRST);
-	writel(0x00000001, ssif_base + UMC_RGLRST);
-	writel(0x00000001, ssif_base + UMC_AIORST);
-	writel(0x00000001, ssif_base + UMC_DMDRST);
-}
-
-static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
-			      int size, int freq)
-{
-	if (freq == 1333) {
-		writel(0x45990b11, dramcont + UMC_CMDCTLA);
-		writel(0x16958924, dramcont + UMC_CMDCTLB);
-		writel(0x5101046A, dramcont + UMC_INITCTLA);
-
-		if (size == 1)
-			writel(0x27028B0A, dramcont + UMC_INITCTLB);
-		else if (size == 2)
-			writel(0x38028B0A, dramcont + UMC_INITCTLB);
-
-		writel(0x000FF0FF, dramcont + UMC_INITCTLC);
-		writel(0x00000b51, dramcont + UMC_DRMMR0);
-	} else if (freq == 1600) {
-		writel(0x36BB0F17, dramcont + UMC_CMDCTLA);
-		writel(0x18C6AA24, dramcont + UMC_CMDCTLB);
-		writel(0x5101387F, dramcont + UMC_INITCTLA);
-
-		if (size == 1)
-			writel(0x2F030D3F, dramcont + UMC_INITCTLB);
-		else if (size == 2)
-			writel(0x43030D3F, dramcont + UMC_INITCTLB);
-
-		writel(0x00FF00FF, dramcont + UMC_INITCTLC);
-		writel(0x00000d71, dramcont + UMC_DRMMR0);
-	}
-
-	writel(0x00000006, dramcont + UMC_DRMMR1);
-
-	if (freq == 1333)
-		writel(0x00000290, dramcont + UMC_DRMMR2);
-	else if (freq == 1600)
-		writel(0x00000298, dramcont + UMC_DRMMR2);
-
-	writel(0x00000800, dramcont + UMC_DRMMR3);
-
-	if (freq == 1333) {
-		if (size == 1)
-			writel(0x00240512, dramcont + UMC_SPCCTLA);
-		else if (size == 2)
-			writel(0x00350512, dramcont + UMC_SPCCTLA);
-
-		writel(0x00ff0006, dramcont + UMC_SPCCTLB);
-		writel(0x000a00ac, dramcont + UMC_RDATACTL_D0);
-	} else if (freq == 1600) {
-		if (size == 1)
-			writel(0x002B0617, dramcont + UMC_SPCCTLA);
-		else if (size == 2)
-			writel(0x003F0617, dramcont + UMC_SPCCTLA);
-
-		writel(0x00ff0008, dramcont + UMC_SPCCTLB);
-		writel(0x000c00ae, dramcont + UMC_RDATACTL_D0);
-	}
-
-	writel(0x04060806, dramcont + UMC_WDATACTL_D0);
-	writel(0x04a02000, dramcont + UMC_DATASET);
-	writel(0x00000000, ca_base + 0x2300);
-	writel(0x00400020, dramcont + UMC_DCCGCTL);
-	writel(0x00000003, dramcont + 0x7000);
-	writel(0x0000000f, dramcont + 0x8000);
-	writel(0x000000c3, dramcont + 0x8004);
-	writel(0x00000071, dramcont + 0x8008);
-	writel(0x0000003b, dramcont + UMC_DICGCTLA);
-	writel(0x020a0808, dramcont + UMC_DICGCTLB);
-	writel(0x00000004, dramcont + UMC_FLOWCTLG);
-	writel(0x80000201, ca_base + 0xc20);
-	writel(0x0801e01e, dramcont + UMC_FLOWCTLA);
-	writel(0x00200000, dramcont + UMC_FLOWCTLB);
-	writel(0x00004444, dramcont + UMC_FLOWCTLC);
-	writel(0x200a0a00, dramcont + UMC_SPCSETB);
-	writel(0x00000000, dramcont + UMC_SPCSETD);
-	writel(0x00000520, dramcont + UMC_DFICUPDCTLA);
-}
-
-static int umc_init_sub(int freq, int size_ch0, int size_ch1)
-{
-	void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE;
-	void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0);
-	void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1);
-	void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0);
-	void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1);
-	void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0);
-	void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0);
-
-	umc_dram_init_start(dramcont0);
-	umc_dram_init_start(dramcont1);
-	umc_dram_init_poll(dramcont0);
-	umc_dram_init_poll(dramcont1);
-
-	writel(0x00000101, dramcont0 + UMC_DIOCTLA);
-
-	ddrphy_init(phy0_0, freq, size_ch0);
-
-	ddrphy_prepare_training(phy0_0, 0);
-	ddrphy_training(phy0_0);
-
-	writel(0x00000101, dramcont1 + UMC_DIOCTLA);
-
-	ddrphy_init(phy1_0, freq, size_ch1);
-
-	ddrphy_prepare_training(phy1_0, 1);
-	ddrphy_training(phy1_0);
-
-	umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq);
-	umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq);
-
-	umc_start_ssif(ssif_base);
-
-	return 0;
-}
-
-int umc_init(void)
-{
-	return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000,
-					CONFIG_SDRAM1_SIZE / 0x08000000);
-}
-
-#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \
-    (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \
-    CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1
-/* OK */
-#else
-#error Unsupported DDR configuration.
-#endif