omap5: Add minimal support for omap5430.

This patch adds the minimal support for OMAP5. The platform and machine
specific headers and sources updated for OMAP5430.

OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP architecture.
It's a dual core SOC with GIC used for interrupt handling and SCU for cache
coherency.

Also moved some part of code from the basic platform support that can be made
common for OMAP4/5. Rest is kept out seperately. The same approach is followed
for clocks and emif support in the subsequent patches.

Signed-off-by: sricharan <r.sricharan@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

11 files changed, 362 insertions, 319 deletions

diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index 095ba39aeb..9f5200ddaf 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -925,7 +925,7 @@ void setup_clocks_for_console(void)
 
 void prcm_init(void)
 {
-	switch (omap4_hw_init_context()) {
+	switch (omap_hw_init_context()) {
 	case OMAP_INIT_CONTEXT_SPL:
 	case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
 	case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index 94c8bed24e..03b45c69b5 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -1212,7 +1212,7 @@ void sdram_init(void)
 
 	debug(">>sdram_init()\n");
 
-	if (omap4_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)
+	if (omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)
 		return;
 
 	in_sdram = running_from_sdram();
@@ -1237,7 +1237,7 @@ void sdram_init(void)
 
 	/* Do some testing after the init */
 	if (!in_sdram) {
-		size_prog = omap4_sdram_size();
+		size_prog = omap_sdram_size();
 		size_detect = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
 						size_prog);
 		/* Compare with the size programmed */
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 8e765cfe7f..2ab16bfebf 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -1,6 +1,6 @@
 /*
  *
- * Common functions for OMAP4 based boards
+ * Common functions for OMAP4/5 based boards
  *
  * (C) Copyright 2010
  * Texas Instruments, <www.ti.com>
@@ -28,29 +28,12 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
-#include <asm/armv7.h>
-#include <asm/arch/cpu.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/sizes.h>
 #include <asm/arch/emif.h>
-#include <asm/arch/gpio.h>
-#include "../omap4/omap4_mux_data.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
-u32 *const omap4_revision = (u32 *)OMAP4_SRAM_SCRATCH_OMAP4_REV;
-
-static const struct gpio_bank gpio_bank_44xx[6] = {
-	{ (void *)OMAP44XX_GPIO1_BASE, METHOD_GPIO_24XX },
-	{ (void *)OMAP44XX_GPIO2_BASE, METHOD_GPIO_24XX },
-	{ (void *)OMAP44XX_GPIO3_BASE, METHOD_GPIO_24XX },
-	{ (void *)OMAP44XX_GPIO4_BASE, METHOD_GPIO_24XX },
-	{ (void *)OMAP44XX_GPIO5_BASE, METHOD_GPIO_24XX },
-	{ (void *)OMAP44XX_GPIO6_BASE, METHOD_GPIO_24XX },
-};
-
-const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx;
-
 #ifdef CONFIG_SPL_BUILD
 /*
  * We use static variables because global data is not ready yet.
@@ -58,78 +41,17 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx;
  * We would not typically need to save these parameters in regular
  * U-Boot. This is needed only in SPL at the moment.
  */
-u32 omap4_boot_device = BOOT_DEVICE_MMC1;
-u32 omap4_boot_mode = MMCSD_MODE_FAT;
+u32 omap_bootdevice = BOOT_DEVICE_MMC1;
+u32 omap_bootmode = MMCSD_MODE_FAT;
 
 u32 omap_boot_device(void)
 {
-	return omap4_boot_device;
+	return omap_bootdevice;
 }
 
 u32 omap_boot_mode(void)
 {
-	return omap4_boot_mode;
-}
-
-/*
- * Some tuning of IOs for optimal power and performance
- */
-static void do_io_settings(void)
-{
-	u32 lpddr2io;
-	struct control_lpddr2io_regs *lpddr2io_regs =
-		(struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE;
-	struct omap4_sys_ctrl_regs *const ctrl =
-		(struct omap4_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE;
-
-	u32 omap4_rev = omap_revision();
-
-	if (omap4_rev == OMAP4430_ES1_0)
-		lpddr2io = CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN;
-	else if (omap4_rev == OMAP4430_ES2_0)
-		lpddr2io = CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER;
-	else
-		lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN;
-
-	/* EMIF1 */
-	writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0);
-	writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1);
-	/* No pull for GR10 as per hw team's recommendation */
-	writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
-		&lpddr2io_regs->control_lpddr2io1_2);
-	writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io1_3);
-
-	/* EMIF2 */
-	writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0);
-	writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1);
-	/* No pull for GR10 as per hw team's recommendation */
-	writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
-		&lpddr2io_regs->control_lpddr2io2_2);
-	writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io2_3);
-
-	/*
-	 * Some of these settings (TRIM values) come from eFuse and are
-	 * in turn programmed in the eFuse at manufacturing time after
-	 * calibration of the device. Do the software over-ride only if
-	 * the device is not correctly trimmed
-	 */
-	if (!(readl(&ctrl->control_std_fuse_opp_bgap) & 0xFFFF)) {
-
-		writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
-			&ctrl->control_ldosram_iva_voltage_ctrl);
-
-		writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
-			&ctrl->control_ldosram_mpu_voltage_ctrl);
-
-		writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
-			&ctrl->control_ldosram_core_voltage_ctrl);
-	}
-
-	if (!readl(&ctrl->control_efuse_1))
-		writel(CONTROL_EFUSE_1_OVERRIDE, &ctrl->control_efuse_1);
-
-	if (!readl(&ctrl->control_efuse_2))
-		writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2);
+	return omap_bootmode;
 }
 #endif
 
@@ -142,26 +64,9 @@ void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
 		writew(pad->val, base + pad->offset);
 }
 
-static void set_muxconf_regs_essential(void)
-{
-	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
-		   sizeof(core_padconf_array_essential) /
-		   sizeof(struct pad_conf_entry));
-
-	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
-		   sizeof(wkup_padconf_array_essential) /
-		   sizeof(struct pad_conf_entry));
-
-	if (omap_revision() >= OMAP4460_ES1_0)
-		do_set_mux(CONTROL_PADCONF_WKUP,
-				 wkup_padconf_array_essential_4460,
-				 sizeof(wkup_padconf_array_essential_4460) /
-				 sizeof(struct pad_conf_entry));
-}
-
 static void set_mux_conf_regs(void)
 {
-	switch (omap4_hw_init_context()) {
+	switch (omap_hw_init_context()) {
 	case OMAP_INIT_CONTEXT_SPL:
 		set_muxconf_regs_essential();
 		break;
@@ -176,7 +81,7 @@ static void set_mux_conf_regs(void)
 	}
 }
 
-static u32 cortex_a9_rev(void)
+u32 cortex_rev(void)
 {
 
 	unsigned int rev;
@@ -187,65 +92,14 @@ static u32 cortex_a9_rev(void)
 	return rev;
 }
 
-static void init_omap4_revision(void)
+void omap_rev_string(char *omap_rev_string)
 {
-	/*
-	 * For some of the ES2/ES1 boards ID_CODE is not reliable:
-	 * Also, ES1 and ES2 have different ARM revisions
-	 * So use ARM revision for identification
-	 */
-	unsigned int arm_rev = cortex_a9_rev();
+	u32 omap_rev = omap_revision();
+	u32 omap_variant = (omap_rev & 0xFFFF0000) >> 16;
+	u32 major_rev = (omap_rev & 0x00000F00) >> 8;
+	u32 minor_rev = (omap_rev & 0x000000F0) >> 4;
 
-	switch (arm_rev) {
-	case MIDR_CORTEX_A9_R0P1:
-		*omap4_revision = OMAP4430_ES1_0;
-		break;
-	case MIDR_CORTEX_A9_R1P2:
-		switch (readl(CONTROL_ID_CODE)) {
-		case OMAP4430_CONTROL_ID_CODE_ES2_0:
-			*omap4_revision = OMAP4430_ES2_0;
-			break;
-		case OMAP4430_CONTROL_ID_CODE_ES2_1:
-			*omap4_revision = OMAP4430_ES2_1;
-			break;
-		case OMAP4430_CONTROL_ID_CODE_ES2_2:
-			*omap4_revision = OMAP4430_ES2_2;
-			break;
-		default:
-			*omap4_revision = OMAP4430_ES2_0;
-			break;
-		}
-		break;
-	case MIDR_CORTEX_A9_R1P3:
-		*omap4_revision = OMAP4430_ES2_3;
-		break;
-	case MIDR_CORTEX_A9_R2P10:
-		switch (readl(CONTROL_ID_CODE)) {
-		case OMAP4460_CONTROL_ID_CODE_ES1_0:
-			*omap4_revision = OMAP4460_ES1_0;
-			break;
-		case OMAP4460_CONTROL_ID_CODE_ES1_1:
-			*omap4_revision = OMAP4460_ES1_1;
-			break;
-		default:
-			*omap4_revision = OMAP4460_ES1_0;
-			break;
-		}
-		break;
-	default:
-		*omap4_revision = OMAP4430_SILICON_ID_INVALID;
-		break;
-	}
-}
-
-void omap_rev_string(char *omap4_rev_string)
-{
-	u32 omap4_rev = omap_revision();
-	u32 omap4_variant = (omap4_rev & 0xFFFF0000) >> 16;
-	u32 major_rev = (omap4_rev & 0x00000F00) >> 8;
-	u32 minor_rev = (omap4_rev & 0x000000F0) >> 4;
-
-	sprintf(omap4_rev_string, "OMAP%x ES%x.%x", omap4_variant, major_rev,
+	sprintf(omap_rev_string, "OMAP%x ES%x.%x", omap_variant, major_rev,
 		minor_rev);
 }
 
@@ -265,7 +119,7 @@ void omap_rev_string(char *omap4_rev_string)
  */
 void s_init(void)
 {
-	init_omap4_revision();
+	init_omap_revision();
 	watchdog_init();
 	set_mux_conf_regs();
 #ifdef CONFIG_SPL_BUILD
@@ -312,7 +166,7 @@ void watchdog_init(void)
  * This is needed because the size of memory installed may be
  * different on different versions of the board
  */
-u32 omap4_sdram_size(void)
+u32 omap_sdram_size(void)
 {
 	u32 section, i, total_size = 0, size, addr;
 	for (i = 0; i < 4; i++) {
@@ -339,8 +193,7 @@ u32 omap4_sdram_size(void)
 int dram_init(void)
 {
 	sdram_init();
-	gd->ram_size = omap4_sdram_size();
-
+	gd->ram_size = omap_sdram_size();
 	return 0;
 }
 
@@ -363,18 +216,26 @@ int arch_cpu_init(void)
 	return 0;
 }
 
-#ifndef CONFIG_SYS_L2CACHE_OFF
-void v7_outer_cache_enable(void)
+/*
+ *  get_device_type(): tell if GP/HS/EMU/TST
+ */
+u32 get_device_type(void)
 {
-	set_pl310_ctrl_reg(1);
+	return 0;
 }
 
-void v7_outer_cache_disable(void)
+/*
+ * Print CPU information
+ */
+int print_cpuinfo(void)
 {
-	set_pl310_ctrl_reg(0);
-}
-#endif
+	char rev_string_buffer[50];
+
+	omap_rev_string(rev_string_buffer);
+	printf("CPU  : %s\n", rev_string_buffer);
 
+	return 0;
+}
 #ifndef CONFIG_SYS_DCACHE_OFF
 void enable_caches(void)
 {
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index 91525ecd46..68732987ae 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -26,7 +26,7 @@
  * MA 02111-1307 USA
  */
 
-#include <asm/arch/omap4.h>
+#include <asm/arch/omap.h>
 #ifdef CONFIG_SPL_BUILD
 .global save_boot_params
 save_boot_params:
@@ -43,17 +43,17 @@ save_boot_params:
 	cmp	r2, r0
 	blt	1f
 
-	/* Store the boot device in omap4_boot_device */
+	/* Store the boot device in omap_boot_device */
 	ldr     r2, [r0, #BOOT_DEVICE_OFFSET]	@ r1 <- value of boot device
 	and	r2, #BOOT_DEVICE_MASK
-	ldr	r3, =omap4_boot_device
-	str     r2, [r3]			@ omap4_boot_device <- r1
+	ldr	r3, =omap_bootdevice
+	str     r2, [r3]			@ omap_boot_device <- r1
 
-	/* Store the boot mode (raw/FAT) in omap4_boot_mode */
+	/* Store the boot mode (raw/FAT) in omap_boot_mode */
 	ldr	r2, [r0, #DEV_DESC_PTR_OFFSET]	@ get the device descriptor ptr
 	ldr	r2, [r2, #DEV_DATA_PTR_OFFSET]	@ get the pDeviceData ptr
 	ldr	r2, [r2, #BOOT_MODE_OFFSET]	@ get the boot mode
-	ldr	r3, =omap4_boot_mode
+	ldr	r3, =omap_bootmode
 	str	r2, [r3]
 1:
 	bx	lr
diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile
index d91272958f..606538be91 100644
--- a/arch/arm/cpu/armv7/omap4/Makefile
+++ b/arch/arm/cpu/armv7/omap4/Makefile
@@ -26,10 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	=  $(obj)lib$(SOC).o
 
 COBJS	+= sdram_elpida.o
-
-ifndef CONFIG_SPL_BUILD
-COBJS	+= sys_info.o
-endif
+COBJS	+= hwinit.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c
new file mode 100644
index 0000000000..78b3cabb07
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/hwinit.c
@@ -0,0 +1,167 @@
+/*
+ *
+ * Common functions for OMAP4 based boards
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Aneesh V	<aneesh@ti.com>
+ *	Steve Sakoman	<steve@sakoman.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/armv7.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/sizes.h>
+#include <asm/arch/emif.h>
+#include <asm/arch/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+u32 *const omap4_revision = (u32 *)OMAP4_SRAM_SCRATCH_OMAP4_REV;
+
+static const struct gpio_bank gpio_bank_44xx[6] = {
+	{ (void *)OMAP44XX_GPIO1_BASE, METHOD_GPIO_24XX },
+	{ (void *)OMAP44XX_GPIO2_BASE, METHOD_GPIO_24XX },
+	{ (void *)OMAP44XX_GPIO3_BASE, METHOD_GPIO_24XX },
+	{ (void *)OMAP44XX_GPIO4_BASE, METHOD_GPIO_24XX },
+	{ (void *)OMAP44XX_GPIO5_BASE, METHOD_GPIO_24XX },
+	{ (void *)OMAP44XX_GPIO6_BASE, METHOD_GPIO_24XX },
+};
+
+const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx;
+
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Some tuning of IOs for optimal power and performance
+ */
+void do_io_settings(void)
+{
+	u32 lpddr2io;
+	struct control_lpddr2io_regs *lpddr2io_regs =
+		(struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE;
+	struct omap4_sys_ctrl_regs *const ctrl =
+		(struct omap4_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE;
+
+	u32 omap4_rev = omap_revision();
+
+	if (omap4_rev == OMAP4430_ES1_0)
+		lpddr2io = CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN;
+	else if (omap4_rev == OMAP4430_ES2_0)
+		lpddr2io = CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER;
+	else
+		lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN;
+
+	/* EMIF1 */
+	writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0);
+	writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1);
+	/* No pull for GR10 as per hw team's recommendation */
+	writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
+		&lpddr2io_regs->control_lpddr2io1_2);
+	writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io1_3);
+
+	/* EMIF2 */
+	writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0);
+	writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1);
+	/* No pull for GR10 as per hw team's recommendation */
+	writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
+		&lpddr2io_regs->control_lpddr2io2_2);
+	writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io2_3);
+
+	/*
+	 * Some of these settings (TRIM values) come from eFuse and are
+	 * in turn programmed in the eFuse at manufacturing time after
+	 * calibration of the device. Do the software over-ride only if
+	 * the device is not correctly trimmed
+	 */
+	if (!(readl(&ctrl->control_std_fuse_opp_bgap) & 0xFFFF)) {
+
+		writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
+			&ctrl->control_ldosram_iva_voltage_ctrl);
+
+		writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
+			&ctrl->control_ldosram_mpu_voltage_ctrl);
+
+		writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
+			&ctrl->control_ldosram_core_voltage_ctrl);
+	}
+
+	if (!readl(&ctrl->control_efuse_1))
+		writel(CONTROL_EFUSE_1_OVERRIDE, &ctrl->control_efuse_1);
+
+	if (!readl(&ctrl->control_efuse_2))
+		writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2);
+}
+#endif
+
+void init_omap_revision(void)
+{
+	/*
+	 * For some of the ES2/ES1 boards ID_CODE is not reliable:
+	 * Also, ES1 and ES2 have different ARM revisions
+	 * So use ARM revision for identification
+	 */
+	unsigned int arm_rev = cortex_rev();
+
+	switch (arm_rev) {
+	case MIDR_CORTEX_A9_R0P1:
+		*omap4_revision = OMAP4430_ES1_0;
+		break;
+	case MIDR_CORTEX_A9_R1P2:
+		switch (readl(CONTROL_ID_CODE)) {
+		case OMAP4_CONTROL_ID_CODE_ES2_0:
+			*omap4_revision = OMAP4430_ES2_0;
+			break;
+		case OMAP4_CONTROL_ID_CODE_ES2_1:
+			*omap4_revision = OMAP4430_ES2_1;
+			break;
+		case OMAP4_CONTROL_ID_CODE_ES2_2:
+			*omap4_revision = OMAP4430_ES2_2;
+			break;
+		default:
+			*omap4_revision = OMAP4430_ES2_0;
+			break;
+		}
+		break;
+	case MIDR_CORTEX_A9_R1P3:
+		*omap4_revision = OMAP4430_ES2_3;
+		break;
+	case MIDR_CORTEX_A9_R2P10:
+		*omap4_revision = OMAP4460_ES1_0;
+		break;
+	default:
+		*omap4_revision = OMAP4430_SILICON_ID_INVALID;
+		break;
+	}
+}
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+void v7_outer_cache_enable(void)
+{
+	set_pl310_ctrl_reg(1);
+}
+
+void v7_outer_cache_disable(void)
+{
+	set_pl310_ctrl_reg(0);
+}
+#endif
diff --git a/arch/arm/cpu/armv7/omap4/omap4_mux_data.h b/arch/arm/cpu/armv7/omap4/omap4_mux_data.h
deleted file mode 100644
index b9403910c9..0000000000
--- a/arch/arm/cpu/armv7/omap4/omap4_mux_data.h
+++ /dev/null
@@ -1,83 +0,0 @@
- /*
- * (C) Copyright 2010
- * Texas Instruments Incorporated, <www.ti.com>
- *
- *	Balaji Krishnamoorthy	<balajitk@ti.com>
- *	Aneesh V		<aneesh@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _OMAP4_MUX_DATA_H_
-#define _OMAP4_MUX_DATA_H_
-
-#include <asm/arch/mux_omap4.h>
-
-const struct pad_conf_entry core_padconf_array_essential[] = {
-
-{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
-{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
-{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
-{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
-{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
-{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
-{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
-{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
-{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)},	 /* sdmmc2_clk */
-{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
-{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)},	 /* sdmmc1_clk */
-{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
-{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
-{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
-{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
-{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
-{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
-{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
-{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
-{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
-{I2C1_SCL, (PTU | IEN | M0)},				/* i2c1_scl */
-{I2C1_SDA, (PTU | IEN | M0)},				/* i2c1_sda */
-{I2C2_SCL, (PTU | IEN | M0)},				/* i2c2_scl */
-{I2C2_SDA, (PTU | IEN | M0)},				/* i2c2_sda */
-{I2C3_SCL, (PTU | IEN | M0)},				/* i2c3_scl */
-{I2C3_SDA, (PTU | IEN | M0)},				/* i2c3_sda */
-{I2C4_SCL, (PTU | IEN | M0)},				/* i2c4_scl */
-{I2C4_SDA, (PTU | IEN | M0)},				/* i2c4_sda */
-{UART3_CTS_RCTX, (PTU | IEN | M0)},			/* uart3_tx */
-{UART3_RTS_SD, (M0)},					/* uart3_rts_sd */
-{UART3_RX_IRRX, (IEN | M0)},				/* uart3_rx */
-{UART3_TX_IRTX, (M0)}					/* uart3_tx */
-
-};
-
-const struct pad_conf_entry wkup_padconf_array_essential[] = {
-
-{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
-{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
-{PAD1_SYS_32K, (IEN | M0)}	 /* sys_32k */
-
-};
-
-const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
-
-{PAD1_FREF_CLK4_REQ, (M3)},	 /* gpio_wk7, TPS */
-
-};
-
-
-#endif  /* _OMAP4_MUX_DATA_H_ */
diff --git a/arch/arm/cpu/armv7/omap4/sys_info.c b/arch/arm/cpu/armv7/omap4/sys_info.c
deleted file mode 100644
index b9e57659f0..0000000000
--- a/arch/arm/cpu/armv7/omap4/sys_info.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- *
- * Author :
- *	Aneesh V	<aneesh@ti.com>
- *	Steve Sakoman	<steve@sakoman.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/sys_proto.h>
-
-/*
- *  get_device_type(): tell if GP/HS/EMU/TST
- */
-u32 get_device_type(void)
-{
-	return 0;
-}
-
-/*
- * get_board_rev() - get board revision
- */
-u32 get_board_rev(void)
-{
-	return 0x20;
-}
-
-/*
- * Print CPU information
- */
-int print_cpuinfo(void)
-{
-
-	puts("CPU  : OMAP4430\n");
-
-	return 0;
-}
diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile
new file mode 100644
index 0000000000..f8ca9ac367
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2000-2010
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	=  $(obj)lib$(SOC).o
+
+COBJS	+= hwinit.o
+COBJS	+= clocks.o
+COBJS	+= emif.o
+COBJS	+= sdram_elpida.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
+
+all:	 $(obj).depend $(LIB)
+
+$(LIB):	$(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv7/omap5/config.mk b/arch/arm/cpu/armv7/omap5/config.mk
new file mode 100644
index 0000000000..639f699045
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/config.mk
@@ -0,0 +1,28 @@
+#
+# Copyright 2011 Linaro Limited
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# Aneesh V <annesh@ti.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+ifdef CONFIG_SPL_BUILD
+ALL-y	+= $(OBJTREE)/MLO
+else
+ALL-y	+= $(obj)u-boot.img
+endif
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
new file mode 100644
index 0000000000..fa8e390c17
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -0,0 +1,78 @@
+/*
+ *
+ * Functions for omap5 based boards.
+ *
+ * (C) Copyright 2011
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Aneesh V	<aneesh@ti.com>
+ *	Steve Sakoman	<steve@sakoman.com>
+ *	Sricharan	<r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/armv7.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/sizes.h>
+#include <asm/utils.h>
+#include <asm/arch/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+u32 *const omap5_revision = (u32 *)OMAP5_SRAM_SCRATCH_OMAP5_REV;
+
+static struct gpio_bank gpio_bank_54xx[6] = {
+	{ (void *)OMAP54XX_GPIO1_BASE, METHOD_GPIO_24XX },
+	{ (void *)OMAP54XX_GPIO2_BASE, METHOD_GPIO_24XX },
+	{ (void *)OMAP54XX_GPIO3_BASE, METHOD_GPIO_24XX },
+	{ (void *)OMAP54XX_GPIO4_BASE, METHOD_GPIO_24XX },
+	{ (void *)OMAP54XX_GPIO5_BASE, METHOD_GPIO_24XX },
+	{ (void *)OMAP54XX_GPIO6_BASE, METHOD_GPIO_24XX },
+};
+
+const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
+
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Some tuning of IOs for optimal power and performance
+ */
+void do_io_settings(void)
+{
+}
+#endif
+
+void init_omap_revision(void)
+{
+	/*
+	 * For some of the ES2/ES1 boards ID_CODE is not reliable:
+	 * Also, ES1 and ES2 have different ARM revisions
+	 * So use ARM revision for identification
+	 */
+	unsigned int rev = cortex_rev();
+
+	switch (rev) {
+	case MIDR_CORTEX_A15_R0P0:
+		*omap5_revision = OMAP5430_ES1_0;
+	default:
+		*omap5_revision = OMAP5430_SILICON_ID_INVALID;
+	}
+}