diff options
| author | Patrick Delaunay <patrick.delaunay@st.com> | 2020-04-30 15:52:46 +0200 |
|---|---|---|
| committer | Patrick Delaunay <patrick.delaunay@st.com> | 2020-05-14 09:02:12 +0200 |
| commit | 1b28a5e2b00a9bf3523cc63694baa03f23604619 (patch) | |
| tree | 69c2a2c375f77c03fa1afa7fc261e0f338d9887b /arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi | |
| parent | 36911fca63162d8309c2bc6443028b56a6411870 (diff) | |
ARM: dts: stm32mp1: DT alignment with Linux 5.7-rc2
DT alignment with Linux 5.7-rc2, including the kernel commits
431c89e6f323 ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1 ED1/EV1 boards
79e965053872 ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boards
877db62ea516 ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards
7519e95ba5f8 ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boards
f68e2dbc591a ARM: dts: stm32: Rename stmfx joystick pins on stm32mp157c-ev1
d6210da4f8bf ARM: dts: stm32: add cpu clock-frequency property on stm32mp15x
b65b6fc56925 ARM: dts: stm32: add wakeup-source in all I2C nodes of stm32mp157c
1c1cf5996cfb ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp157c-ed1
bef15fc0fad9 ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1
b7fc0a87b9ac ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx
a5e557655285 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK boards
8bc631b650a6 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-ed1
fccd6a577bb3 ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1 board
cc775a83db65 ARM: dts: stm32: add resets property on all DMA nodes on stm32mp151
c5fae093511b ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1
9879e2165758 ARM: dts: stm32: add USB OTG pinctrl to stm32mp15
82ac8a81f985 ARM: dts: stm32: add USB OTG full support on stm32mp151
8714b26e2863 ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic node
a7959919709e ARM: dts: stm32: Add UART8 pins A pinmux entry on stm32mp1
4d7c53a684da ARM: dts: stm32: Add USART3 pins A pinmux entry on stm32mp1
80ab128332ee ARM: dts: stm32: Add SAI2A pins B pinmux entry on stm32mp1
ab7f98c0c546 ARM: dts: stm32: Add Ethernet0 RMII pins A pinmux entry on stm32mp1
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Diffstat (limited to 'arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi')
| -rw-r--r-- | arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi | 8 |
1 files changed, 0 insertions, 8 deletions
diff --git a/arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi index 248fc455e3..64299df816 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi @@ -40,10 +40,6 @@ #interrupt-cells = <2>; status = "okay"; - st,main-control-register = <0x04>; - st,vin-control-register = <0xc0>; - st,usb-control-register = <0x30>; - regulators { compatible = "st,stpmic1-regulators"; @@ -78,7 +74,6 @@ regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; regulator-always-on; - st,mask_reset; regulator-initial-mode = <0>; regulator-over-current-protection; }; @@ -118,8 +113,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; interrupt-parent = <&pmic>; }; @@ -145,7 +138,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { |