Merge branch 'master' of git://git.denx.de/u-boot-arm

15 files changed, 60 insertions, 297 deletions

diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
index 140379fb38..02ed5957e9 100644
--- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
+++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
@@ -11,9 +11,17 @@
 #ifndef _CLOCKS_AM33XX_H_
 #define _CLOCKS_AM33XX_H_
 
+/* MAIN PLL Fdll supported frequencies */
+#define MPUPLL_M_1000	1000
+#define MPUPLL_M_800	800
+#define MPUPLL_M_720	720
+#define MPUPLL_M_600	600
+#define MPUPLL_M_550	550
+#define MPUPLL_M_300	300
+
 /* MAIN PLL Fdll = 550 MHz, by default */
 #ifndef CONFIG_SYS_MPUCLK
-#define CONFIG_SYS_MPUCLK	550
+#define CONFIG_SYS_MPUCLK	MPUPLL_M_550
 #endif
 
 #define UART_RESET		(0x1 << 1)
@@ -21,5 +29,7 @@
 #define UART_SMART_IDLE_EN	(0x1 << 0x3)
 
 extern void enable_dmm_clocks(void);
+extern const struct dpll_params dpll_core_opp100;
+extern struct dpll_params dpll_mpu_opp100;
 
 #endif	/* endif _CLOCKS_AM33XX_H_ */
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index 73e6db8998..52fa128af9 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -38,6 +38,16 @@
 #define AM335X				0xB944
 #define TI81XX				0xB81E
 #define DEVICE_ID			(CTRL_BASE + 0x0600)
+#define DEVICE_ID_MASK			0x1FFF
+
+/* MPU max frequencies */
+#define AM335X_ZCZ_300			0x1FEF
+#define AM335X_ZCZ_600			0x1FAF
+#define AM335X_ZCZ_720			0x1F2F
+#define AM335X_ZCZ_800			0x1E2F
+#define AM335X_ZCZ_1000			0x1C2F
+#define AM335X_ZCE_300			0x1FDF
+#define AM335X_ZCE_600			0x1F9F
 
 /* This gives the status of the boot mode pins on the evm */
 #define SYSBOOT_MASK			(BIT(0) | BIT(1) | BIT(2)\
@@ -509,6 +519,8 @@ struct ctrl_dev {
 	unsigned int macid1h;		/* offset 0x3c */
 	unsigned int resv4[4];
 	unsigned int miisel;		/* offset 0x50 */
+	unsigned int resv5[106];
+	unsigned int efuse_sma;		/* offset 0x1FC */
 };
 
 /* gmii_sel register defines */
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index c6070a3fc9..87b7d367b9 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -10,6 +10,7 @@
 
 #ifndef _SYS_PROTO_H_
 #define _SYS_PROTO_H_
+#include <asm/arch/cpu.h>
 
 #define BOARD_REV_ID	0x0
 
@@ -42,4 +43,7 @@ u32 wait_on_value(u32, u32, void *, u32);
 #ifdef CONFIG_NOR_BOOT
 void enable_norboot_pin_mux(void);
 #endif
+void am33xx_spl_board_init(void);
+int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev);
+int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency);
 #endif
diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h
index a27145ba28..92c847e44a 100644
--- a/arch/arm/include/asm/arch-mx27/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx27/imx-regs.h
@@ -169,7 +169,7 @@ struct iim_regs {
 	struct fuse_bank {
 		u32 fuse_regs[0x20];
 		u32 fuse_rsvd[0xe0];
-	} bank[1];
+	} bank[2];
 };
 
 struct fuse_bank0_regs {
@@ -209,9 +209,13 @@ struct fuse_bank0_regs {
 #define IIM_BASE_ADDR		IMX_IIM_BASE
 #define IMX_FEC_BASE		(0x2b000 + IMX_IO_BASE)
 
+#define IMX_NFC_BASE		(0xD8000000)
 #define IMX_ESD_BASE		(0xD8001000)
 #define IMX_WEIM_BASE		(0xD8002000)
 
+#define NFC_BASE_ADDR		IMX_NFC_BASE
+
+
 /* FMCR System Control bit definition*/
 #define UART4_RXD_CTL	(1 << 25)
 #define UART4_RTS_CTL	(1 << 24)
diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h
index c49368765b..93f29a780f 100644
--- a/arch/arm/include/asm/arch-mx6/clock.h
+++ b/arch/arm/include/asm/arch-mx6/clock.h
@@ -50,4 +50,5 @@ void enable_usboh3_clk(unsigned char enable);
 int enable_sata_clock(void);
 int enable_i2c_clk(unsigned char enable, unsigned i2c_num);
 void enable_ipu_clock(void);
+int enable_fec_anatop_clock(void);
 #endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
index 74aefe60f4..2813593e25 100644
--- a/arch/arm/include/asm/arch-mx6/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
@@ -892,7 +892,7 @@ struct mxc_ccm_reg {
 
 #define PLL2_PFD0_FREQ		352000000
 #define PLL2_PFD1_FREQ		594000000
-#define PLL2_PFD2_FREQ		400000000
+#define PLL2_PFD2_FREQ		396000000
 #define PLL2_PFD2_DIV_FREQ	200000000
 #define PLL3_PFD0_FREQ		720000000
 #define PLL3_PFD1_FREQ		540000000
diff --git a/arch/arm/include/asm/arch-mx6/iomux.h b/arch/arm/include/asm/arch-mx6/iomux.h
index f4cfd4f921..ff13a1ea9f 100644
--- a/arch/arm/include/asm/arch-mx6/iomux.h
+++ b/arch/arm/include/asm/arch-mx6/iomux.h
@@ -27,6 +27,11 @@
 #define IOMUXC_GPR13_SATA_PHY_2_MASK	(0x1f<<2)
 #define IOMUXC_GPR13_SATA_PHY_1_MASK	(3<<0)
 
+#define IOMUX_GPR1_FEC_CLOCK_MUX1_SEL_MASK (0x3 << 17)
+#define IOMUX_GPR1_FEC_CLOCK_MUX2_SEL_MASK (0x1 << 14)
+#define IOMUX_GPR1_FEC_MASK    (IOMUX_GPR1_FEC_CLOCK_MUX1_SEL_MASK \
+				| IOMUX_GPR1_FEC_CLOCK_MUX2_SEL_MASK)
+
 #define IOMUXC_GPR13_SATA_PHY_8_RXEQ_0P5DB	(0<<24)
 #define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P0DB	(1<<24)
 #define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P5DB	(2<<24)
diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
index c3d0b70877..b5df68afc6 100644
--- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
@@ -235,7 +235,7 @@ enum {
 	MX6_PAD_DISP0_DAT1__GPIO_4_22		= IOMUX_PAD(0x03C8, 0x00B4, 5, 0x0000, 0, 0),
 	MX6_PAD_DISP0_DAT1__MMDC_MMDC_DEBUG_6	= IOMUX_PAD(0x03C8, 0x00B4, 6, 0x0000, 0, 0),
 	MX6_PAD_DISP0_DAT1__PL301_SIM_MX6DL_PER1_HADDR_12	= IOMUX_PAD(0x03C8, 0x00B4, 7, 0x0000, 0, 0),
-	MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10	= IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, 0),
+	MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10	= IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6_PAD_DISP0_DAT10__LCDIF_DAT_10	= IOMUX_PAD(0x03CC, 0x00B8, 1, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6_PAD_DISP0_DAT10__USDHC1_USDHC_DEBUG_6	= IOMUX_PAD(0x03CC, 0x00B8, 3, 0x0000, 0, 0),
 	MX6_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3	= IOMUX_PAD(0x03CC, 0x00B8, 4, 0x0000, 0, 0),
@@ -309,7 +309,7 @@ enum {
 	MX6_PAD_DISP0_DAT19__GPIO_5_13		= IOMUX_PAD(0x03F0, 0x00DC, 5, 0x0000, 0, 0),
 	MX6_PAD_DISP0_DAT19__MMDC_MMDC_DEBUG_24	= IOMUX_PAD(0x03F0, 0x00DC, 6, 0x0000, 0, 0),
 	MX6_PAD_DISP0_DAT19__WEIM_WEIM_CS_3	= IOMUX_PAD(0x03F0, 0x00DC, 7, 0x0000, 0, 0),
-	MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2	= IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, 0),
+	MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2	= IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6_PAD_DISP0_DAT2__LCDIF_DAT_2		= IOMUX_PAD(0x03F4, 0x00E0, 1, 0x0000, 0, 0),
 	MX6_PAD_DISP0_DAT2__ECSPI3_MISO		= IOMUX_PAD(0x03F4, 0x00E0, 2, 0x0000, 0, 0),
 	MX6_PAD_DISP0_DAT2__USDHC1_USDHC_DEBUG_2	= IOMUX_PAD(0x03F4, 0x00E0, 3, 0x0000, 0, 0),
@@ -1043,7 +1043,7 @@ enum {
 	MX6_PAD_GPIO_1__ESAI1_SCKR		= IOMUX_PAD(0x05E0, 0x0210, 0, 0x083C, 1, 0),
 	MX6_PAD_GPIO_1__WDOG2_WDOG_B		= IOMUX_PAD(0x05E0, 0x0210, 1, 0x0000, 0, 0),
 	MX6_PAD_GPIO_1__KPP_ROW_5		= IOMUX_PAD(0x05E0, 0x0210, 2, 0x08CC, 1, 0),
-	MX6_PAD_GPIO_1__USBOTG_ID		= IOMUX_PAD(0x05E0, 0x0210, 3, 0x0790, 1, 0),
+	MX6_PAD_GPIO_1__USB_OTG_ID		= IOMUX_PAD(0x05E0, 0x0210, 3, 0x0790, 1, 0),
 	MX6_PAD_GPIO_1__PWM2_PWMO		= IOMUX_PAD(0x05E0, 0x0210, 4, 0x0000, 0, 0),
 	MX6_PAD_GPIO_1__GPIO_1_1		= IOMUX_PAD(0x05E0, 0x0210, 5, 0x0000, 0, 0),
 	MX6_PAD_GPIO_1__USDHC1_CD		= IOMUX_PAD(0x05E0, 0x0210, 6, 0x0000, 0, 0),
diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h
index 94df0075b0..fe9a8c343d 100644
--- a/arch/arm/include/asm/arch-mx6/mx6q_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h
@@ -984,6 +984,7 @@ enum {
 	MX6_PAD_GPIO_1__ESAI1_SCKR		= IOMUX_PAD(0x05F4, 0x0224, 0, 0x086C, 1, 0),
 	MX6_PAD_GPIO_1__WDOG2_WDOG_B		= IOMUX_PAD(0x05F4, 0x0224, 1, 0x0000, 0, 0),
 	MX6_PAD_GPIO_1__KPP_ROW_5		= IOMUX_PAD(0x05F4, 0x0224, 2, 0x08F4, 0, 0),
+	MX6_PAD_GPIO_1__USB_OTG_ID		= IOMUX_PAD(0x05F4, 0x0224, 3, 0x0000, 0, 0),
 	MX6_PAD_GPIO_1__PWM2_PWMO		= IOMUX_PAD(0x05F4, 0x0224, 4, 0x0000, 0, 0),
 	MX6_PAD_GPIO_1__GPIO_1_1		= IOMUX_PAD(0x05F4, 0x0224, 5, 0x0000, 0, 0),
 	MX6_PAD_GPIO_1__USDHC1_CD		= IOMUX_PAD(0x05F4, 0x0224, 6, 0x0000, 0, 0),
diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
index b39a354f39..5f9c90ad87 100644
--- a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
@@ -18,5 +18,17 @@ enum {
 	MX6_PAD_SD2_DAT3__USDHC2_DAT3				= IOMUX_PAD(0x0570, 0x0268, 0, 0x0000, 0, 0),
 	MX6_PAD_UART1_RXD__UART1_RXD				= IOMUX_PAD(0x05A0, 0x0298, 0, 0x07FC, 0, 0),
 	MX6_PAD_UART1_TXD__UART1_TXD				= IOMUX_PAD(0x05A4, 0x029C, 0, 0x0000, 0, 0),
+
+	MX6_PAD_FEC_MDC__FEC_MDC				= IOMUX_PAD(0x41c, 0x12c, 0, 0x000, 0, 0),
+	MX6_PAD_FEC_MDIO__FEC_MDIO				= IOMUX_PAD(0x420, 0x130, 0, 0x6f4, 1, 0),
+	MX6_PAD_FEC_CRS_DV__FEC_RX_DV				= IOMUX_PAD(0x418, 0x128, 0, 0x704, 1, 0),
+	MX6_PAD_FEC_RXD0__FEC_RX_DATA0				= IOMUX_PAD(0x42c, 0x13c, 0, 0x6f8, 0, 0),
+	MX6_PAD_FEC_RXD1__FEC_RX_DATA1				= IOMUX_PAD(0x430, 0x140, 0, 0x6fc, 1, 0),
+	MX6_PAD_FEC_TX_EN__FEC_TX_EN				= IOMUX_PAD(0x438, 0x148, 0, 0x000, 0, 0),
+	MX6_PAD_FEC_TXD0__FEC_TX_DATA0				= IOMUX_PAD(0x43c, 0x14c, 0, 0x000, 0, 0),
+	MX6_PAD_FEC_TXD1__FEC_TX_DATA1				= IOMUX_PAD(0x440, 0x150, 0, 0x000, 0, 0),
+	MX6_PAD_FEC_REF_CLK__FEC_REF_OUT			= IOMUX_PAD(0x424, 0x134, 0x10, 0x000, 0, 0),
+	MX6_PAD_FEC_RX_ER__GPIO_4_19				= IOMUX_PAD(0x0428, 0x0138, 5, 0x0000, 0, 0),
+	MX6_PAD_FEC_TX_CLK__GPIO_4_21				= IOMUX_PAD(0x0434, 0x0144, 5, 0x0000, 0, 0),
 };
 #endif	/* __ASM_ARCH_MX6_MX6SL_PINS_H__ */
diff --git a/arch/arm/include/asm/arch-mxs/sys_proto.h b/arch/arm/include/asm/arch-mxs/sys_proto.h
index 1038592c92..43c7dd6bf1 100644
--- a/arch/arm/include/asm/arch-mxs/sys_proto.h
+++ b/arch/arm/include/asm/arch-mxs/sys_proto.h
@@ -28,8 +28,9 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int));
 #include <asm/arch/iomux-mx28.h>
 #endif
 
-void mxs_common_spl_init(const iomux_cfg_t *iomux_setup,
-			const unsigned int iomux_size);
+void mxs_common_spl_init(const uint32_t arg, const uint32_t *resptr,
+			 const iomux_cfg_t *iomux_setup,
+			 const unsigned int iomux_size);
 #endif
 
 struct mxs_pair {
diff --git a/arch/arm/include/asm/arch-s3c44b0/hardware.h b/arch/arm/include/asm/arch-s3c44b0/hardware.h
deleted file mode 100644
index 146e265d9a..0000000000
--- a/arch/arm/include/asm/arch-s3c44b0/hardware.h
+++ /dev/null
@@ -1,281 +0,0 @@
-/********************************************************/
-/*							*/
-/* Samsung S3C44B0					*/
-/* tpu <tapu@371.net>					*/
-/*							*/
-/********************************************************/
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define REGBASE		0x01c00000
-#define REGL(addr)	(*(volatile unsigned int *)(REGBASE+addr))
-#define REGW(addr)	(*(volatile unsigned short *)(REGBASE+addr))
-#define REGB(addr)	(*(volatile unsigned char *)(REGBASE+addr))
-
-
-/*****************************/
-/* CPU Wrapper Registers     */
-/*****************************/
-
-#define SYSCFG		REGL(0x000000)
-#define NCACHBE0	REGL(0x000004)
-#define NCACHBE1	REGL(0x000008)
-#define SBUSCON		REGL(0x040000)
-
-/************************************/
-/* Memory Controller Registers      */
-/************************************/
-
-#define BWSCON		REGL(0x080000)
-#define BANKCON0	REGL(0x080004)
-#define BANKCON1	REGL(0x080008)
-#define BANKCON2	REGL(0x08000c)
-#define BANKCON3	REGL(0x080010)
-#define BANKCON4	REGL(0x080014)
-#define BANKCON5	REGL(0x080018)
-#define BANKCON6	REGL(0x08001c)
-#define BANKCON7	REGL(0x080020)
-#define REFRESH		REGL(0x080024)
-#define BANKSIZE	REGL(0x080028)
-#define MRSRB6		REGL(0x08002c)
-#define MRSRB7		REGL(0x080030)
-
-/*********************/
-/* UART Registers    */
-/*********************/
-
-#define ULCON0		REGL(0x100000)
-#define ULCON1		REGL(0x104000)
-#define UCON0		REGL(0x100004)
-#define UCON1		REGL(0x104004)
-#define UFCON0		REGL(0x100008)
-#define UFCON1		REGL(0x104008)
-#define UMCON0		REGL(0x10000c)
-#define UMCON1		REGL(0x10400c)
-#define UTRSTAT0	REGL(0x100010)
-#define UTRSTAT1	REGL(0x104010)
-#define UERSTAT0	REGL(0x100014)
-#define UERSTAT1	REGL(0x104014)
-#define UFSTAT0		REGL(0x100018)
-#define UFSTAT1		REGL(0x104018)
-#define UMSTAT0		REGL(0x10001c)
-#define UMSTAT1		REGL(0x10401c)
-#define UTXH0		REGB(0x100020)
-#define UTXH1		REGB(0x104020)
-#define URXH0		REGB(0x100024)
-#define URXH1		REGB(0x104024)
-#define UBRDIV0		REGL(0x100028)
-#define UBRDIV1		REGL(0x104028)
-
-/*******************/
-/* SIO Registers   */
-/*******************/
-
-#define SIOCON		REGL(0x114000)
-#define SIODAT		REGL(0x114004)
-#define SBRDR		REGL(0x114008)
-#define ITVCNT		REGL(0x11400c)
-#define DCNTZ		REGL(0x114010)
-
-/********************/
-/* IIS Registers    */
-/********************/
-
-#define IISCON		REGL(0x118000)
-#define IISMOD		REGL(0x118004)
-#define IISPSR		REGL(0x118008)
-#define IISFIFCON	REGL(0x11800c)
-#define IISFIF		REGW(0x118010)
-
-/**************************/
-/* I/O Ports Registers    */
-/**************************/
-
-#define PCONA		REGL(0x120000)
-#define PDATA		REGL(0x120004)
-#define PCONB		REGL(0x120008)
-#define PDATB		REGL(0x12000c)
-#define PCONC		REGL(0x120010)
-#define PDATC		REGL(0x120014)
-#define PUPC		REGL(0x120018)
-#define PCOND		REGL(0x12001c)
-#define PDATD		REGL(0x120020)
-#define PUPD		REGL(0x120024)
-#define PCONE		REGL(0x120028)
-#define PDATE		REGL(0x12002c)
-#define PUPE		REGL(0x120030)
-#define PCONF		REGL(0x120034)
-#define PDATF		REGL(0x120038)
-#define PUPF		REGL(0x12003c)
-#define PCONG		REGL(0x120040)
-#define PDATG		REGL(0x120044)
-#define PUPG		REGL(0x120048)
-#define SPUCR		REGL(0x12004c)
-#define EXTINT		REGL(0x120050)
-#define EXTINTPND	REGL(0x120054)
-
-/*********************************/
-/* WatchDog Timers Registers     */
-/*********************************/
-
-#define WTCON		REGL(0x130000)
-#define WTDAT		REGL(0x130004)
-#define WTCNT		REGL(0x130008)
-
-/*********************************/
-/* A/D Converter Registers       */
-/*********************************/
-
-#define ADCCON		REGL(0x140000)
-#define ADCPSR		REGL(0x140004)
-#define ADCDAT		REGL(0x140008)
-
-/***************************/
-/* PWM Timer Registers     */
-/***************************/
-
-#define TCFG0		REGL(0x150000)
-#define TCFG1		REGL(0x150004)
-#define TCON		REGL(0x150008)
-#define TCNTB0		REGL(0x15000c)
-#define TCMPB0		REGL(0x150010)
-#define TCNTO0		REGL(0x150014)
-#define TCNTB1		REGL(0x150018)
-#define TCMPB1		REGL(0x15001c)
-#define TCNTO1		REGL(0x150020)
-#define TCNTB2		REGL(0x150024)
-#define TCMPB2		REGL(0x150028)
-#define TCNTO2		REGL(0x15002c)
-#define TCNTB3		REGL(0x150030)
-#define TCMPB3		REGL(0x150034)
-#define TCNTO3		REGL(0x150038)
-#define TCNTB4		REGL(0x15003c)
-#define TCMPB4		REGL(0x150040)
-#define TCNTO4		REGL(0x150044)
-#define TCNTB5		REGL(0x150048)
-#define TCNTO5		REGL(0x15004c)
-
-/*********************/
-/* IIC Registers     */
-/*********************/
-
-#define IICCON		REGL(0x160000)
-#define IICSTAT		REGL(0x160004)
-#define IICADD		REGL(0x160008)
-#define IICDS		REGL(0x16000c)
-
-/*********************/
-/* RTC Registers     */
-/*********************/
-
-#define RTCCON		REGB(0x170040)
-#define RTCALM		REGB(0x170050)
-#define ALMSEC		REGB(0x170054)
-#define ALMMIN		REGB(0x170058)
-#define ALMHOUR		REGB(0x17005c)
-#define ALMDAY		REGB(0x170060)
-#define ALMMON		REGB(0x170064)
-#define ALMYEAR		REGB(0x170068)
-#define RTCRST		REGB(0x17006c)
-#define BCDSEC		REGB(0x170070)
-#define BCDMIN		REGB(0x170074)
-#define BCDHOUR		REGB(0x170078)
-#define BCDDAY		REGB(0x17007c)
-#define BCDDATE		REGB(0x170080)
-#define BCDMON		REGB(0x170084)
-#define BCDYEAR		REGB(0x170088)
-#define TICINT		REGB(0x17008c)
-
-/*********************************/
-/* Clock & Power Registers       */
-/*********************************/
-
-#define PLLCON		REGL(0x180000)
-#define CLKCON		REGL(0x180004)
-#define CLKSLOW		REGL(0x180008)
-#define LOCKTIME	REGL(0x18000c)
-
-/**************************************/
-/* Interrupt Controller Registers     */
-/**************************************/
-
-#define INTCON		REGL(0x200000)
-#define INTPND		REGL(0x200004)
-#define INTMOD		REGL(0x200008)
-#define INTMSK		REGL(0x20000c)
-#define I_PSLV		REGL(0x200010)
-#define I_PMST		REGL(0x200014)
-#define I_CSLV		REGL(0x200018)
-#define I_CMST		REGL(0x20001c)
-#define I_ISPR		REGL(0x200020)
-#define I_ISPC		REGL(0x200024)
-#define F_ISPR		REGL(0x200038)
-#define F_ISPC		REGL(0x20003c)
-
-/********************************/
-/* LCD Controller Registers     */
-/********************************/
-
-#define LCDCON1		REGL(0x300000)
-#define LCDCON2		REGL(0x300004)
-#define LCDSADDR1	REGL(0x300008)
-#define LCDSADDR2	REGL(0x30000c)
-#define LCDSADDR3	REGL(0x300010)
-#define REDLUT		REGL(0x300014)
-#define GREENLUT	REGL(0x300018)
-#define BLUELUT		REGL(0x30001c)
-#define DP1_2		REGL(0x300020)
-#define DP4_7		REGL(0x300024)
-#define DP3_5		REGL(0x300028)
-#define DP2_3		REGL(0x30002c)
-#define DP5_7		REGL(0x300030)
-#define DP3_4		REGL(0x300034)
-#define DP4_5		REGL(0x300038)
-#define DP6_7		REGL(0x30003c)
-#define LCDCON3		REGL(0x300040)
-#define DITHMODE	REGL(0x300044)
-
-/*********************/
-/* DMA Registers     */
-/*********************/
-
-#define ZDCON0		REGL(0x280000)
-#define ZDISRC0		REGL(0x280004)
-#define ZDIDES0		REGL(0x280008)
-#define ZDICNT0		REGL(0x28000c)
-#define ZDCSRC0		REGL(0x280010)
-#define ZDCDES0		REGL(0x280014)
-#define ZDCCNT0		REGL(0x280018)
-
-#define ZDCON1		REGL(0x280020)
-#define ZDISRC1		REGL(0x280024)
-#define ZDIDES1		REGL(0x280028)
-#define ZDICNT1		REGL(0x28002c)
-#define ZDCSRC1		REGL(0x280030)
-#define ZDCDES1		REGL(0x280034)
-#define ZDCCNT1		REGL(0x280038)
-
-#define BDCON0		REGL(0x380000)
-#define BDISRC0		REGL(0x380004)
-#define BDIDES0		REGL(0x380008)
-#define BDICNT0		REGL(0x38000c)
-#define BDCSRC0		REGL(0x380010)
-#define BDCDES0		REGL(0x380014)
-#define BDCCNT0		REGL(0x380018)
-
-#define BDCON1		REGL(0x380020)
-#define BDISRC1		REGL(0x380024)
-#define BDIDES1		REGL(0x380028)
-#define BDICNT1		REGL(0x38002c)
-#define BDCSRC1		REGL(0x380030)
-#define BDCDES1		REGL(0x380034)
-#define BDCCNT1		REGL(0x380038)
-
-
-#define CLEAR_PEND_INT(n)       I_ISPC = (1<<(n))
-#define INT_ENABLE(n)		INTMSK &= ~(1<<(n))
-#define INT_DISABLE(n)		INTMSK |= (1<<(n))
-
-#define HARD_RESET_NOW()
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 009863beec..55a4e266a0 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -16,7 +16,7 @@ enum dma_data_direction {
 
 static void *dma_alloc_coherent(size_t len, unsigned long *handle)
 {
-	*handle = (unsigned long)malloc(len);
+	*handle = (unsigned long)memalign(ARCH_DMA_MINALIGN, len);
 	return (void *)*handle;
 }
 
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index 79a9597419..e126436093 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -47,6 +47,6 @@ struct arch_global_data {
 
 #include <asm-generic/global_data.h>
 
-#define DECLARE_GLOBAL_DATA_PTR     register volatile gd_t *gd asm ("r8")
+#define DECLARE_GLOBAL_DATA_PTR     register volatile gd_t *gd asm ("r9")
 
 #endif /* __ASM_GBL_DATA_H */
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 5e2f027ba4..61fee9f06d 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -310,12 +310,6 @@ struct prcm_regs {
 	u32 prm_vc_val_bypass;
 	u32 prm_vc_cfg_i2c_mode;
 	u32 prm_vc_cfg_i2c_clk;
-	u32 prm_sldo_core_setup;
-	u32 prm_sldo_core_ctrl;
-	u32 prm_sldo_mpu_setup;
-	u32 prm_sldo_mpu_ctrl;
-	u32 prm_sldo_mm_setup;
-	u32 prm_sldo_mm_ctrl;
 	u32 prm_abbldo_mpu_setup;
 	u32 prm_abbldo_mpu_ctrl;