Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze

18 files changed, 1238 insertions, 62 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3355b3bcaa..36aa4e9f8b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -681,7 +681,7 @@ config ARCH_ZYNQ
 	select DM_SPI
 	select DM_SPI_FLASH
 
-config TARGET_XILINX_ZYNQMP
+config ARCH_ZYNQMP
 	bool "Support Xilinx ZynqMP Platform"
 	select ARM64
 
@@ -874,6 +874,8 @@ source "arch/arm/mach-zynq/Kconfig"
 
 source "arch/arm/cpu/armv7/Kconfig"
 
+source "arch/arm/cpu/armv8/zynqmp/Kconfig"
+
 source "arch/arm/cpu/armv8/Kconfig"
 
 source "arch/arm/imx-common/Kconfig"
@@ -991,7 +993,6 @@ source "board/warp/Kconfig"
 source "board/woodburn/Kconfig"
 source "board/work-microwave/work_92105/Kconfig"
 source "board/xaeniax/Kconfig"
-source "board/xilinx/zynqmp/Kconfig"
 source "board/zipitz2/Kconfig"
 
 source "arch/arm/Kconfig.debug"
diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile
index dee5e258b6..6466ebb460 100644
--- a/arch/arm/cpu/armv8/Makefile
+++ b/arch/arm/cpu/armv8/Makefile
@@ -16,4 +16,4 @@ obj-y	+= tlb.o
 obj-y	+= transition.o
 
 obj-$(CONFIG_FSL_LSCH3) += fsl-lsch3/
-obj-$(CONFIG_TARGET_XILINX_ZYNQMP) += zynqmp/
+obj-$(CONFIG_ARCH_ZYNQMP) += zynqmp/
diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig b/arch/arm/cpu/armv8/zynqmp/Kconfig
new file mode 100644
index 0000000000..c8fcfb6abb
--- /dev/null
+++ b/arch/arm/cpu/armv8/zynqmp/Kconfig
@@ -0,0 +1,23 @@
+if ARCH_ZYNQMP
+
+choice
+	prompt "Xilinx ZynqMP board select"
+
+config TARGET_ZYNQMP_EP
+	bool "ZynqMP EP Board"
+
+endchoice
+
+config SYS_BOARD
+	default "zynqmp"
+
+config SYS_VENDOR
+	default "xilinx"
+
+config SYS_SOC
+	default "zynqmp"
+
+config SYS_CONFIG_NAME
+	default "xilinx_zynqmp_ep" if TARGET_ZYNQMP_EP
+
+endif
diff --git a/arch/arm/cpu/armv8/zynqmp/Makefile b/arch/arm/cpu/armv8/zynqmp/Makefile
index efab5eabc9..d0ed2223ff 100644
--- a/arch/arm/cpu/armv8/zynqmp/Makefile
+++ b/arch/arm/cpu/armv8/zynqmp/Makefile
@@ -8,3 +8,4 @@
 obj-y	+= clk.o
 obj-y	+= cpu.o
 obj-$(CONFIG_MP)	+= mp.o
+obj-y	+= slcr.o
diff --git a/arch/arm/cpu/armv8/zynqmp/mp.c b/arch/arm/cpu/armv8/zynqmp/mp.c
index 17e32a7b7c..dcb80b522e 100644
--- a/arch/arm/cpu/armv8/zynqmp/mp.c
+++ b/arch/arm/cpu/armv8/zynqmp/mp.c
@@ -216,12 +216,7 @@ int cpu_release(int nr, int argc, char * const argv[])
 			printf("R5 lockstep mode\n");
 			set_r5_tcm_mode(LOCK);
 			set_r5_halt_mode(HALT, LOCK);
-
-			if (boot_addr == 0)
-				set_r5_start(0);
-			else
-				set_r5_start(1);
-
+			set_r5_start(boot_addr);
 			enable_clock_r5();
 			release_r5_reset(LOCK);
 			set_r5_halt_mode(RELEASE, LOCK);
diff --git a/arch/arm/cpu/armv8/zynqmp/slcr.c b/arch/arm/cpu/armv8/zynqmp/slcr.c
new file mode 100644
index 0000000000..713e9a62c0
--- /dev/null
+++ b/arch/arm/cpu/armv8/zynqmp/slcr.c
@@ -0,0 +1,63 @@
+/*
+ * (C) Copyright 2014 - 2015 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/clk.h>
+
+/*
+ * zynq_slcr_mio_get_status - Get the status of MIO peripheral.
+ *
+ * @peri_name: Name of the peripheral for checking MIO status
+ * @get_pins: Pointer to array of get pin for this peripheral
+ * @num_pins: Number of pins for this peripheral
+ * @mask: Mask value
+ * @check_val: Required check value to get the status of  periph
+ */
+struct zynq_slcr_mio_get_status {
+	const char *peri_name;
+	const int *get_pins;
+	int num_pins;
+	u32 mask;
+	u32 check_val;
+};
+
+static const struct zynq_slcr_mio_get_status mio_periphs[] = {
+};
+
+/*
+ * zynq_slcr_get_mio_pin_status - Get the MIO pin status of peripheral.
+ *
+ * @periph: Name of the peripheral
+ *
+ * Returns count to indicate the number of pins configured for the
+ * given @periph.
+ */
+int zynq_slcr_get_mio_pin_status(const char *periph)
+{
+	const struct zynq_slcr_mio_get_status *mio_ptr;
+	int val, i, j;
+	int mio = 0;
+
+	for (i = 0; i < ARRAY_SIZE(mio_periphs); i++) {
+		if (strcmp(periph, mio_periphs[i].peri_name) == 0) {
+			mio_ptr = &mio_periphs[i];
+			for (j = 0; j < mio_ptr->num_pins; j++) {
+				val = readl(&slcr_base->mio_pin
+						[mio_ptr->get_pins[j]]);
+				if ((val & mio_ptr->mask) == mio_ptr->check_val)
+					mio++;
+			}
+			break;
+		}
+	}
+
+	return mio;
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 8ebd693432..06fbd8b0af 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
 	zynq-microzed.dtb \
 	zynq-picozed.dtb \
 	zynq-zc770-xm010.dtb \
+	zynq-zc770-xm011.dtb \
 	zynq-zc770-xm012.dtb \
 	zynq-zc770-xm013.dtb
 dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index 920715989e..0b62cb0936 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -2,7 +2,7 @@
  * Xilinx Zynq 7000 DTSI
  * Describes the hardware common to all Zynq 7000-based boards.
  *
- * Copyright (C) 2013 Xilinx, Inc.
+ *  Copyright (C) 2011 - 2015 Xilinx
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -21,11 +21,11 @@
 			reg = <0>;
 			clocks = <&clkc 3>;
 			clock-latency = <1000>;
+			cpu0-supply = <&regulator_vccpint>;
 			operating-points = <
 				/* kHz    uV */
 				666667  1000000
 				333334  1000000
-				222223  1000000
 			>;
 		};
 
@@ -44,14 +44,65 @@
 		reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >;
 	};
 
-	amba {
+	regulator_vccpint: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCPINT";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	amba: amba {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		interrupt-parent = <&intc>;
 		ranges;
 
-		i2c0: zynq-i2c@e0004000 {
+		adc: adc@f8007100 {
+			compatible = "xlnx,zynq-xadc-1.00.a";
+			reg = <0xf8007100 0x20>;
+			interrupts = <0 7 4>;
+			interrupt-parent = <&intc>;
+			clocks = <&clkc 12>;
+		};
+
+		can0: can@e0008000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clocks = <&clkc 19>, <&clkc 36>;
+			clock-names = "can_clk", "pclk";
+			reg = <0xe0008000 0x1000>;
+			interrupts = <0 28 4>;
+			interrupt-parent = <&intc>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+		};
+
+		can1: can@e0009000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clocks = <&clkc 20>, <&clkc 37>;
+			clock-names = "can_clk", "pclk";
+			reg = <0xe0009000 0x1000>;
+			interrupts = <0 51 4>;
+			interrupt-parent = <&intc>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+		};
+
+		gpio0: gpio@e000a000 {
+			compatible = "xlnx,zynq-gpio-1.0";
+			#gpio-cells = <2>;
+			clocks = <&clkc 42>;
+			gpio-controller;
+			interrupt-parent = <&intc>;
+			interrupts = <0 20 4>;
+			reg = <0xe000a000 0x1000>;
+		};
+
+		i2c0: i2c@e0004000 {
 			compatible = "cdns,i2c-r1p10";
 			status = "disabled";
 			clocks = <&clkc 38>;
@@ -62,7 +113,7 @@
 			#size-cells = <0>;
 		};
 
-		i2c1: zynq-i2c@e0005000 {
+		i2c1: i2c@e0005000 {
 			compatible = "cdns,i2c-r1p10";
 			status = "disabled";
 			clocks = <&clkc 39>;
@@ -76,41 +127,46 @@
 		intc: interrupt-controller@f8f01000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
-			#address-cells = <1>;
 			interrupt-controller;
 			reg = <0xF8F01000 0x1000>,
 			      <0xF8F00100 0x100>;
 		};
 
-		L2: cache-controller {
+		L2: cache-controller@f8f02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xF8F02000 0x1000>;
+			interrupts = <0 2 4>;
 			arm,data-latency = <3 2 2>;
 			arm,tag-latency = <2 2 2>;
 			cache-unified;
 			cache-level = <2>;
 		};
 
-		uart0: uart@e0000000 {
-			compatible = "xlnx,xuartps";
+		mc: memory-controller@f8006000 {
+			compatible = "xlnx,zynq-ddrc-a05";
+			reg = <0xf8006000 0x1000>;
+		};
+
+		uart0: serial@e0000000 {
+			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
 			status = "disabled";
 			clocks = <&clkc 23>, <&clkc 40>;
-			clock-names = "ref_clk", "aper_clk";
+			clock-names = "uart_clk", "pclk";
 			reg = <0xE0000000 0x1000>;
 			interrupts = <0 27 4>;
 		};
 
-		uart1: uart@e0001000 {
-			compatible = "xlnx,xuartps";
+		uart1: serial@e0001000 {
+			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
 			status = "disabled";
 			clocks = <&clkc 24>, <&clkc 41>;
-			clock-names = "ref_clk", "aper_clk";
+			clock-names = "uart_clk", "pclk";
 			reg = <0xE0001000 0x1000>;
 			interrupts = <0 50 4>;
 		};
 
 		spi0: spi@e0006000 {
-			compatible = "xlnx,zynq-spi";
+			compatible = "xlnx,zynq-spi-r1p6";
 			reg = <0xe0006000 0x1000>;
 			status = "disabled";
 			interrupt-parent = <&intc>;
@@ -123,7 +179,7 @@
 		};
 
 		spi1: spi@e0007000 {
-			compatible = "xlnx,zynq-spi";
+			compatible = "xlnx,zynq-spi-r1p6";
 			reg = <0xe0007000 0x1000>;
 			status = "disabled";
 			interrupt-parent = <&intc>;
@@ -136,24 +192,28 @@
 		};
 
 		gem0: ethernet@e000b000 {
-			compatible = "cdns,gem";
-			reg = <0xe000b000 0x4000>;
+			compatible = "cdns,zynq-gem", "cdns,gem";
+			reg = <0xe000b000 0x1000>;
 			status = "disabled";
 			interrupts = <0 22 4>;
 			clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
 			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		gem1: ethernet@e000c000 {
-			compatible = "cdns,gem";
-			reg = <0xe000c000 0x4000>;
+			compatible = "cdns,zynq-gem", "cdns,gem";
+			reg = <0xe000c000 0x1000>;
 			status = "disabled";
 			interrupts = <0 45 4>;
 			clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
 			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
-		sdhci0: ps7-sdhci@e0100000 {
+		sdhci0: sdhci@e0100000 {
 			compatible = "arasan,sdhci-8.9a";
 			status = "disabled";
 			clock-names = "clk_xin", "clk_ahb";
@@ -163,7 +223,7 @@
 			reg = <0xe0100000 0x1000>;
 		} ;
 
-		sdhci1: ps7-sdhci@e0101000 {
+		sdhci1: sdhci@e0101000 {
 			compatible = "arasan,sdhci-8.9a";
 			status = "disabled";
 			clock-names = "clk_xin", "clk_ahb";
@@ -176,13 +236,12 @@
 		slcr: slcr@f8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "xlnx,zynq-slcr", "syscon";
+			compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
 			reg = <0xF8000000 0x1000>;
 			ranges;
 			clkc: clkc@100 {
 				#clock-cells = <1>;
 				compatible = "xlnx,ps7-clkc";
-				ps-clk-frequency = <33333333>;
 				fclk-enable = <0>;
 				clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
 						"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
@@ -197,6 +256,35 @@
 						"dbg_trc", "dbg_apb";
 				reg = <0x100 0x100>;
 			};
+
+			pinctrl0: pinctrl@700 {
+				compatible = "xlnx,pinctrl-zynq";
+				reg = <0x700 0x200>;
+				syscon = <&slcr>;
+			};
+		};
+
+		dmac_s: dmac@f8003000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xf8003000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
+				"dma4", "dma5", "dma6", "dma7";
+			interrupts = <0 13 4>,
+			             <0 14 4>, <0 15 4>,
+			             <0 16 4>, <0 17 4>,
+			             <0 40 4>, <0 41 4>,
+			             <0 42 4>, <0 43 4>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <4>;
+			clocks = <&clkc 27>;
+			clock-names = "apb_pclk";
+		};
+
+		devcfg: devcfg@f8007000 {
+			compatible = "xlnx,zynq-devcfg-1.0";
+			reg = <0xf8007000 0x100>;
 		};
 
 		global_timer: timer@f8f00200 {
@@ -207,27 +295,57 @@
 			clocks = <&clkc 4>;
 		};
 
-		ttc0: ttc0@f8001000 {
+		ttc0: timer@f8001000 {
 			interrupt-parent = <&intc>;
-			interrupts = < 0 10 4 0 11 4 0 12 4 >;
+			interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
 			compatible = "cdns,ttc";
 			clocks = <&clkc 6>;
 			reg = <0xF8001000 0x1000>;
 		};
 
-		ttc1: ttc1@f8002000 {
+		ttc1: timer@f8002000 {
 			interrupt-parent = <&intc>;
-			interrupts = < 0 37 4 0 38 4 0 39 4 >;
+			interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
 			compatible = "cdns,ttc";
 			clocks = <&clkc 6>;
 			reg = <0xF8002000 0x1000>;
 		};
-		scutimer: scutimer@f8f00600 {
+
+		scutimer: timer@f8f00600 {
 			interrupt-parent = <&intc>;
 			interrupts = < 1 13 0x301 >;
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = < 0xf8f00600 0x20 >;
 			clocks = <&clkc 4>;
 		} ;
+
+		usb0: usb@e0002000 {
+			compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
+			status = "disabled";
+			clocks = <&clkc 28>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 21 4>;
+			reg = <0xe0002000 0x1000>;
+			phy_type = "ulpi";
+		};
+
+		usb1: usb@e0003000 {
+			compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
+			status = "disabled";
+			clocks = <&clkc 29>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 44 4>;
+			reg = <0xe0003000 0x1000>;
+			phy_type = "ulpi";
+		};
+
+		watchdog0: watchdog@f8005000 {
+			clocks = <&clkc 45>;
+			compatible = "cdns,wdt-r1p2";
+			interrupt-parent = <&intc>;
+			interrupts = <0 9 1>;
+			reg = <0xf8005000 0x1000>;
+			timeout-sec = <10>;
+		};
 	};
 };
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
index 4fa0b00b31..6691a8de24 100644
--- a/arch/arm/dts/zynq-zc702.dts
+++ b/arch/arm/dts/zynq-zc702.dts
@@ -1,7 +1,8 @@
 /*
  * Xilinx ZC702 board DTS
  *
- * Copyright (C) 2013 Xilinx, Inc.
+ *  Copyright (C) 2011 - 2015 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -9,15 +10,380 @@
 #include "zynq-7000.dtsi"
 
 / {
-	model = "Zynq ZC702 Board";
+	model = "Zynq ZC702 Development Board";
 	compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
 
 	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
 		serial0 = &uart1;
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <0 0x40000000>;
+		reg = <0x0 0x40000000>;
 	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		sw14 {
+			label = "sw14";
+			gpios = <&gpio0 12 0>;
+			linux,code = <108>; /* down */
+			gpio-key,wakeup;
+			autorepeat;
+		};
+		sw13 {
+			label = "sw13";
+			gpios = <&gpio0 14 0>;
+			linux,code = <103>; /* up */
+			gpio-key,wakeup;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds23 {
+			label = "ds23";
+			gpios = <&gpio0 10 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&amba {
+	ocm: sram@fffc0000 {
+		compatible = "mmio-sram";
+		reg = <0xfffc0000 0x10000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+
+	i2cswitch@74 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			si570: clock-generator@5d {
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				temperature-stability = <50>;
+				reg = <0x5d>;
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@54 {
+				compatible = "at,24c08";
+				reg = <0x54>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			gpio@21 {
+				compatible = "ti,tca6416";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			hwmon@52 {
+				compatible = "ti,ucd9248";
+				reg = <52>;
+			};
+			hwmon@53 {
+				compatible = "ti,ucd9248";
+				reg = <53>;
+			};
+			hwmon@54 {
+				compatible = "ti,ucd9248";
+				reg = <54>;
+			};
+		};
+	};
+};
+
+&pinctrl0 {
+	pinctrl_can0_default: can0-default {
+		mux {
+			function = "can0";
+			groups = "can0_9_grp";
+		};
+
+		conf {
+			groups = "can0_9_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO46";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO47";
+			bias-disable;
+		};
+	};
+
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7", "MIO8";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO29", "MIO31", "MIO36";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+			       "MIO35", "MIO37", "MIO38", "MIO39";
+			bias-disable;
+		};
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
 };
diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts
index 2a80195757..cf7bce4468 100644
--- a/arch/arm/dts/zynq-zc706.dts
+++ b/arch/arm/dts/zynq-zc706.dts
@@ -1,7 +1,8 @@
 /*
  * Xilinx ZC706 board DTS
  *
- * Copyright (C) 2013 Xilinx, Inc.
+ *  Copyright (C) 2011 - 2015 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -9,15 +10,301 @@
 #include "zynq-7000.dtsi"
 
 / {
-	model = "Zynq ZC706 Board";
+	model = "Zynq ZC706 Development Board";
 	compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
 
 	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
 		serial0 = &uart1;
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <0 0x40000000>;
+		reg = <0x0 0x40000000>;
 	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+
+	i2cswitch@74 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			si570: clock-generator@5d {
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				temperature-stability = <50>;
+				reg = <0x5d>;
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@54 {
+				compatible = "at,24c08";
+				reg = <0x54>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			gpio@21 {
+				compatible = "ti,tca6416";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			ucd90120@65 {
+				compatible = "ti,ucd90120";
+				reg = <0x65>;
+			};
+		};
+	};
+};
+
+&pinctrl0 {
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			low-power-enable;
+			bias-disable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO46", "MIO47";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_14_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_14_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO29", "MIO31", "MIO36";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+			       "MIO35", "MIO37", "MIO38", "MIO39";
+			bias-disable;
+		};
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
 };
diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
index bf107e308a..da3a182ea1 100644
--- a/arch/arm/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/dts/zynq-zc770-xm010.dts
@@ -1,7 +1,7 @@
 /*
  * Xilinx ZC770 XM010 board DTS
  *
- * Copyright (C) 2013 Xilinx, Inc.
+ * Copyright (C) 2013 - 2015 Xilinx, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -9,20 +9,85 @@
 #include "zynq-7000.dtsi"
 
 / {
-	model = "Zynq ZC770 XM010 Board";
 	compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
+	model = "Xilinx Zynq";
 
 	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
 		serial0 = &uart1;
-		spi1 = &spi1;
+		spi0 = &spi1;
 	};
 
-	memory {
+	chosen {
+		bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk";
+		linux,stdout-path = &uart1;
+		stdout-path = &uart1;
+	};
+
+	memory@0 {
 		device_type = "memory";
-		reg = <0 0x40000000>;
+		reg = <0x0 0x40000000>;
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
 	};
 };
 
 &spi1 {
 	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+	flash@0 {
+		compatible = "sst25wf080";
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@test {
+			label = "spi-flash";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	m24c02_eeprom@52 {
+		compatible = "at,24c02";
+		reg = <0x52>;
+	};
+
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
 };
diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts
new file mode 100644
index 0000000000..d38c820135
--- /dev/null
+++ b/arch/arm/dts/zynq-zc770-xm011.dts
@@ -0,0 +1,65 @@
+/*
+ * Xilinx ZC770 XM013 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+/ {
+	compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
+	model = "Xilinx Zynq";
+
+	aliases {
+		i2c0 = &i2c1;
+		serial0 = &uart1;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk";
+		linux,stdout-path = &uart1;
+		stdout-path = &uart1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	usb_phy1: phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+};
+
+&can0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	m24c02_eeprom@52 {
+		compatible = "at,24c02";
+		reg = <0x52>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy1>;
+};
diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts
index 127a6619c6..f8cc5039d6 100644
--- a/arch/arm/dts/zynq-zc770-xm012.dts
+++ b/arch/arm/dts/zynq-zc770-xm012.dts
@@ -1,7 +1,7 @@
 /*
  * Xilinx ZC770 XM012 board DTS
  *
- * Copyright (C) 2013 Xilinx, Inc.
+ * Copyright (C) 2013 - 2015 Xilinx, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -9,15 +9,58 @@
 #include "zynq-7000.dtsi"
 
 / {
-	model = "Zynq ZC770 XM012 Board";
 	compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000";
+	model = "Xilinx Zynq";
 
 	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
 		serial0 = &uart1;
+		spi0 = &spi1;
 	};
 
-	memory {
+	chosen {
+		bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk";
+		linux,stdout-path = &uart1;
+		stdout-path = &uart1;
+	};
+
+	memory@0 {
 		device_type = "memory";
-		reg = <0 0x40000000>;
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+};
+
+&can1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	m24c02_eeprom@52 {
+		compatible = "at,24c02";
+		reg = <0x52>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	m24c02_eeprom@52 {
+		compatible = "at,24c02";
+		reg = <0x52>;
 	};
 };
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts
index c61c7e7592..436a8cd1b9 100644
--- a/arch/arm/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/dts/zynq-zc770-xm013.dts
@@ -9,15 +9,71 @@
 #include "zynq-7000.dtsi"
 
 / {
-	model = "Zynq ZC770 XM013 Board";
 	compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
+	model = "Xilinx Zynq";
 
 	aliases {
+		ethernet0 = &gem1;
+		i2c0 = &i2c1;
 		serial0 = &uart0;
+		spi0 = &spi0;
 	};
 
-	memory {
+	chosen {
+		bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk";
+		linux,stdout-path = &uart0;
+		stdout-path = &uart0;
+	};
+
+	memory@0 {
 		device_type = "memory";
-		reg = <0 0x40000000>;
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+	eeprom: at25@0 {
+		at25,byte-len = <8192>;
+		at25,addr-mode = <2>;
+		at25,page-size = <32>;
+
+		compatible = "atmel,at25";
+		reg = <2>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&gem1 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
 	};
 };
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	si570: clock-generator@55 {
+		#clock-cells = <0>;
+		compatible = "silabs,si570";
+		temperature-stability = <50>;
+		reg = <0x55>;
+		factory-fout = <156250000>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts
index 70cc8a6c0d..5762576fea 100644
--- a/arch/arm/dts/zynq-zed.dts
+++ b/arch/arm/dts/zynq-zed.dts
@@ -1,7 +1,8 @@
 /*
  * Xilinx ZED board DTS
  *
- * Copyright (C) 2013 Xilinx, Inc.
+ *  Copyright (C) 2011 - 2015 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -9,15 +10,54 @@
 #include "zynq-7000.dtsi"
 
 / {
-	model = "Zynq ZED Board";
+	model = "Zynq Zed Development Board";
 	compatible = "xlnx,zynq-zed", "xlnx,zynq-7000";
 
 	aliases {
+		ethernet0 = &gem0;
 		serial0 = &uart1;
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <0 0x20000000>;
+		reg = <0x0 0x20000000>;
 	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
 };
diff --git a/arch/arm/dts/zynq-zybo.dts b/arch/arm/dts/zynq-zybo.dts
index 20e0386777..10f7815524 100644
--- a/arch/arm/dts/zynq-zybo.dts
+++ b/arch/arm/dts/zynq-zybo.dts
@@ -1,7 +1,8 @@
 /*
  * Digilent ZYBO board DTS
  *
- * Copyright (C) 2013 Xilinx, Inc.
+ *  Copyright (C) 2011 - 2015 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -9,15 +10,44 @@
 #include "zynq-7000.dtsi"
 
 / {
-	model = "Zynq ZYBO Board";
-	compatible = "xlnx,zynq-zybo", "xlnx,zynq-7000";
+	model = "Zynq ZYBO Development Board";
+	compatible = "digilent,zynq-zybo", "xlnx,zynq-7000";
 
 	aliases {
+		ethernet0 = &gem0;
 		serial0 = &uart1;
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <0 0x20000000>;
+		reg = <0x0 0x20000000>;
 	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+};
+
+&clkc {
+	ps-clk-frequency = <50000000>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
 };
diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h b/arch/arm/include/asm/arch-zynqmp/hardware.h
index c9dc49d783..7640eabad1 100644
--- a/arch/arm/include/asm/arch-zynqmp/hardware.h
+++ b/arch/arm/include/asm/arch-zynqmp/hardware.h
@@ -11,6 +11,11 @@
 #define ZYNQ_SERIAL_BASEADDR0	0xFF000000
 #define ZYNQ_SERIAL_BASEADDR1	0xFF001000
 
+#define ZYNQ_GEM_BASEADDR0	0xFF0B0000
+#define ZYNQ_GEM_BASEADDR1	0xFF0C0000
+#define ZYNQ_GEM_BASEADDR2	0xFF0D0000
+#define ZYNQ_GEM_BASEADDR3	0xFF0E0000
+
 #define ZYNQ_SPI_BASEADDR0	0xFF040000
 #define ZYNQ_SPI_BASEADDR1	0xFF050000
 
@@ -20,6 +25,8 @@
 #define ZYNQ_SDHCI_BASEADDR0	0xFF160000
 #define ZYNQ_SDHCI_BASEADDR1	0xFF170000
 
+#define ZYNQMP_SATA_BASEADDR	0xFD0C0000
+
 #define ZYNQMP_CRL_APB_BASEADDR	0xFF5E0000
 #define ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT	0x1000000
 
@@ -55,6 +62,15 @@ struct iou_scntr {
 #define EMMC_MODE	0x00000006
 #define JTAG_MODE	0x00000000
 
+#define ZYNQMP_IOU_SLCR_BASEADDR	0xFF180000
+
+struct iou_slcr_regs {
+	u32 mio_pin[78];
+	u32 reserved[442];
+};
+
+#define slcr_base ((struct iou_slcr_regs *)ZYNQMP_IOU_SLCR_BASEADDR)
+
 #define ZYNQMP_RPU_BASEADDR	0xFF9A0000
 
 struct rpu_regs {
diff --git a/arch/arm/include/asm/arch-zynqmp/sys_proto.h b/arch/arm/include/asm/arch-zynqmp/sys_proto.h
index d8e0ba1588..f5c90d11dc 100644
--- a/arch/arm/include/asm/arch-zynqmp/sys_proto.h
+++ b/arch/arm/include/asm/arch-zynqmp/sys_proto.h
@@ -8,7 +8,13 @@
 #ifndef _ASM_ARCH_SYS_PROTO_H
 #define _ASM_ARCH_SYS_PROTO_H
 
+/* Setup clk for network */
+static inline void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate)
+{
+}
+
 int zynq_sdhci_init(unsigned long regbase);
+int zynq_slcr_get_mio_pin_status(const char *periph);
 
 unsigned int zynqmp_get_silicon_version(void);