Merge branch 'master' of git://git.denx.de/u-boot-i2c

* 'master' of git://git.denx.de/u-boot-i2c:
  km/common: remove printfs for i2c deblocking code
  CONFIG: SMDK5250: I2C: Enable I2C
  I2C: Add support for Multi channel
  I2C: Modify the I2C driver for EXYNOS5
  I2C: Move struct s3c24x0_i2c to a common place.
  EXYNOS: PINMUX: Add pinmux support for I2C
  EXYNOS5: define EXYNOS5_I2C_SPACING
  EXYNOS: Add I2C base address.
  EXYNOS: CLK: Add i2c clock
  mx6qsabrelite: add i2c multi-bus support
  imx-common: add i2c.c for bus recovery support
  i.mx53: add definition for I2C3_BASE_ADDR
  i.mx: iomux-v3.c: move to imx-common directory
  i.mx: iomux-v3.h: move to imx-common include directory
  iomux-v3: remove include of mx6x_pins.h
  mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS support
  mxc_i2c: add bus recovery support
  mxc_i2c: prep work for multiple busses support
  mxc_i2c: add i2c_regs argument to i2c_imx_stop
  mxc_i2c: add retries
  mxc_i2c: check for arbitration lost
  mxc_i2c: change slave addr if conflicts with destination.
  mxc_i2c: don't disable controller after every transaction
  mxc_i2c: place i2c_reset code inline
  mxc_i2c: place imx_start code inline
  mxc_i2c: remove redundant read
  mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state
  mxc_i2c.c: code i2c_probe as a 0 length i2c_write
  mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_write
  mxc_i2c: create i2c_init_transfer
  mxc_i2c: clear i2sr before waiting for bit
  mxc_i2c: create tx_byte function
  mxc_i2c: remove ifdef of CONFIG_HARD_I2C
  mxc_i2c: fix i2c_imx_stop
  i2c: deblock i2c bus also if accessed before realocation

Signed-off-by: Wolfgang Denk <wd@denx.de>

18 files changed, 289 insertions, 15 deletions

diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 330bd75da9..f7829b2cc7 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -578,6 +578,29 @@ void exynos4_set_mipi_clk(void)
 	writel(cfg, &clk->div_lcd0);
 }
 
+/*
+ * I2C
+ *
+ * exynos5: obtaining the I2C clock
+ */
+static unsigned long exynos5_get_i2c_clk(void)
+{
+	struct exynos5_clock *clk =
+		(struct exynos5_clock *)samsung_get_base_clock();
+	unsigned long aclk_66, aclk_66_pre, sclk;
+	unsigned int ratio;
+
+	sclk = get_pll_clk(MPLL);
+
+	ratio = (readl(&clk->div_top1)) >> 24;
+	ratio &= 0x7;
+	aclk_66_pre = sclk / (ratio + 1);
+	ratio = readl(&clk->div_top0);
+	ratio &= 0x7;
+	aclk_66 = aclk_66_pre / (ratio + 1);
+	return aclk_66;
+}
+
 unsigned long get_pll_clk(int pllreg)
 {
 	if (cpu_is_exynos5())
@@ -594,6 +617,16 @@ unsigned long get_arm_clk(void)
 		return exynos4_get_arm_clk();
 }
 
+unsigned long get_i2c_clk(void)
+{
+	if (cpu_is_exynos5()) {
+		return exynos5_get_i2c_clk();
+	} else {
+		debug("I2C clock is not set for this CPU\n");
+		return 0;
+	}
+}
+
 unsigned long get_pwm_clk(void)
 {
 	if (cpu_is_exynos5())
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index d2b7d2cba7..d28f05557f 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -184,6 +184,48 @@ static void exynos5_sromc_config(int flags)
 	}
 }
 
+static void exynos5_i2c_config(int peripheral, int flags)
+{
+
+	struct exynos5_gpio_part1 *gpio1 =
+		(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+
+	switch (peripheral) {
+	case PERIPH_ID_I2C0:
+		s5p_gpio_cfg_pin(&gpio1->b3, 0, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->b3, 1, GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C1:
+		s5p_gpio_cfg_pin(&gpio1->b3, 2, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->b3, 3, GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C2:
+		s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C3:
+		s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C4:
+		s5p_gpio_cfg_pin(&gpio1->a2, 0, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a2, 1, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C5:
+		s5p_gpio_cfg_pin(&gpio1->a2, 2, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a2, 3, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C6:
+		s5p_gpio_cfg_pin(&gpio1->b1, 3, GPIO_FUNC(0x4));
+		s5p_gpio_cfg_pin(&gpio1->b1, 4, GPIO_FUNC(0x4));
+		break;
+	case PERIPH_ID_I2C7:
+		s5p_gpio_cfg_pin(&gpio1->b2, 2, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->b2, 3, GPIO_FUNC(0x3));
+		break;
+	}
+}
+
 static int exynos5_pinmux_config(int peripheral, int flags)
 {
 	switch (peripheral) {
@@ -201,6 +243,16 @@ static int exynos5_pinmux_config(int peripheral, int flags)
 	case PERIPH_ID_SROMC:
 		exynos5_sromc_config(flags);
 		break;
+	case PERIPH_ID_I2C0:
+	case PERIPH_ID_I2C1:
+	case PERIPH_ID_I2C2:
+	case PERIPH_ID_I2C3:
+	case PERIPH_ID_I2C4:
+	case PERIPH_ID_I2C5:
+	case PERIPH_ID_I2C6:
+	case PERIPH_ID_I2C7:
+		exynos5_i2c_config(peripheral, flags);
+		break;
 	default:
 		debug("%s: invalid peripheral %d", __func__, peripheral);
 		return -1;
diff --git a/arch/arm/cpu/armv7/imx-common/Makefile b/arch/arm/cpu/armv7/imx-common/Makefile
index e5ff375c12..bf36be5767 100644
--- a/arch/arm/cpu/armv7/imx-common/Makefile
+++ b/arch/arm/cpu/armv7/imx-common/Makefile
@@ -27,7 +27,9 @@ include $(TOPDIR)/config.mk
 
 LIB     = $(obj)libimx-common.o
 
-COBJS	= timer.o cpu.o speed.o
+COBJS-y	= iomux-v3.o timer.o cpu.o speed.o
+COBJS-$(CONFIG_I2C_MXC) += i2c.o
+COBJS	:= $(sort $(COBJS-y))
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/arch/arm/cpu/armv7/imx-common/i2c.c b/arch/arm/cpu/armv7/imx-common/i2c.c
new file mode 100644
index 0000000000..da2b26f43f
--- /dev/null
+++ b/arch/arm/cpu/armv7/imx-common/i2c.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2012 Boundary Devices Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/errno.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/mxc_i2c.h>
+#include <watchdog.h>
+
+static int force_idle_bus(void *priv)
+{
+	int i;
+	int sda, scl;
+	ulong elapsed, start_time;
+	struct i2c_pads_info *p = (struct i2c_pads_info *)priv;
+	int ret = 0;
+
+	gpio_direction_input(p->sda.gp);
+	gpio_direction_input(p->scl.gp);
+
+	imx_iomux_v3_setup_pad(p->sda.gpio_mode);
+	imx_iomux_v3_setup_pad(p->scl.gpio_mode);
+
+	sda = gpio_get_value(p->sda.gp);
+	scl = gpio_get_value(p->scl.gp);
+	if ((sda & scl) == 1)
+		goto exit;		/* Bus is idle already */
+
+	printf("%s: sda=%d scl=%d sda.gp=0x%x scl.gp=0x%x\n", __func__,
+		sda, scl, p->sda.gp, p->scl.gp);
+	/* Send high and low on the SCL line */
+	for (i = 0; i < 9; i++) {
+		gpio_direction_output(p->scl.gp, 0);
+		udelay(50);
+		gpio_direction_input(p->scl.gp);
+		udelay(50);
+	}
+	start_time = get_timer(0);
+	for (;;) {
+		sda = gpio_get_value(p->sda.gp);
+		scl = gpio_get_value(p->scl.gp);
+		if ((sda & scl) == 1)
+			break;
+		WATCHDOG_RESET();
+		elapsed = get_timer(start_time);
+		if (elapsed > (CONFIG_SYS_HZ / 5)) {	/* .2 seconds */
+			ret = -EBUSY;
+			printf("%s: failed to clear bus, sda=%d scl=%d\n",
+					__func__, sda, scl);
+			break;
+		}
+	}
+exit:
+	imx_iomux_v3_setup_pad(p->sda.i2c_mode);
+	imx_iomux_v3_setup_pad(p->scl.i2c_mode);
+	return ret;
+}
+
+static void * const i2c_bases[] = {
+	(void *)I2C1_BASE_ADDR,
+	(void *)I2C2_BASE_ADDR,
+#ifdef I2C3_BASE_ADDR
+	(void *)I2C3_BASE_ADDR,
+#endif
+};
+
+/* i2c_index can be from 0 - 2 */
+void setup_i2c(unsigned i2c_index, int speed, int slave_addr,
+		struct i2c_pads_info *p)
+{
+	if (i2c_index >= ARRAY_SIZE(i2c_bases))
+		return;
+	/* Enable i2c clock */
+	enable_i2c_clk(1, i2c_index);
+	/* Make sure bus is idle */
+	force_idle_bus(p);
+	bus_i2c_init(i2c_bases[i2c_index], speed, slave_addr,
+			force_idle_bus, p);
+}
diff --git a/arch/arm/cpu/armv7/mx6/iomux-v3.c b/arch/arm/cpu/armv7/imx-common/iomux-v3.c
index 8785532163..da093fbe14 100644
--- a/arch/arm/cpu/armv7/mx6/iomux-v3.c
+++ b/arch/arm/cpu/armv7/imx-common/iomux-v3.c
@@ -23,8 +23,7 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
-#include <asm/arch/mx6x_pins.h>
-#include <asm/arch/iomux-v3.h>
+#include <asm/imx-common/iomux-v3.h>
 
 static void *base = (void *)IOMUXC_BASE_ADDR;
 
diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c
index 64862b31f1..c67c3cfc48 100644
--- a/arch/arm/cpu/armv7/mx5/clock.c
+++ b/arch/arm/cpu/armv7/mx5/clock.c
@@ -117,6 +117,26 @@ void enable_usboh3_clk(unsigned char enable)
 	writel(reg, &mxc_ccm->CCGR2);
 }
 
+#ifdef CONFIG_I2C_MXC
+/* i2c_num can be from 0 - 2 */
+int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
+{
+	u32 reg;
+	u32 mask;
+
+	if (i2c_num > 2)
+		return -EINVAL;
+	mask = MXC_CCM_CCGR_CG_MASK << ((i2c_num + 9) << 1);
+	reg = __raw_readl(&mxc_ccm->CCGR1);
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	__raw_writel(reg, &mxc_ccm->CCGR1);
+	return 0;
+}
+#endif
+
 void set_usb_phy1_clk(void)
 {
 	unsigned int reg;
diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile
index b0da028da6..cbce411cca 100644
--- a/arch/arm/cpu/armv7/mx6/Makefile
+++ b/arch/arm/cpu/armv7/mx6/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).o
 
-COBJS	= soc.o clock.o iomux-v3.o
+COBJS	= soc.o clock.o
 SOBJS   = lowlevel_init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index 52d5dc4d90..fddb3733ae 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -50,6 +50,26 @@ void enable_usboh3_clk(unsigned char enable)
 
 }
 
+#ifdef CONFIG_I2C_MXC
+/* i2c_num can be from 0 - 2 */
+int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
+{
+	u32 reg;
+	u32 mask;
+
+	if (i2c_num > 2)
+		return -EINVAL;
+	mask = MXC_CCM_CCGR_CG_MASK << ((i2c_num + 3) << 1);
+	reg = __raw_readl(&imx_ccm->CCGR2);
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	__raw_writel(reg, &imx_ccm->CCGR2);
+	return 0;
+}
+#endif
+
 static u32 decode_pll(enum pll_clocks pll, u32 infreq)
 {
 	u32 div;
diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
index 637fb4bd14..72dc655ec1 100644
--- a/arch/arm/include/asm/arch-exynos/clk.h
+++ b/arch/arm/include/asm/arch-exynos/clk.h
@@ -30,6 +30,7 @@
 
 unsigned long get_pll_clk(int pllreg);
 unsigned long get_arm_clk(void);
+unsigned long get_i2c_clk(void);
 unsigned long get_pwm_clk(void);
 unsigned long get_uart_clk(int dev_index);
 void set_mmc_clk(int dev_index, unsigned int div);
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index 0c341d4318..0e6ea87079 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -49,6 +49,7 @@
 #define EXYNOS4_USB_HOST_EHCI_BASE	0x12580000
 #define EXYNOS4_USBPHY_BASE		0x125B0000
 #define EXYNOS4_UART_BASE		0x13800000
+#define EXYNOS4_I2C_BASE		0x13860000
 #define EXYNOS4_ADC_BASE		0x13910000
 #define EXYNOS4_PWMTIMER_BASE		0x139D0000
 #define EXYNOS4_MODEM_BASE		0x13A00000
@@ -57,6 +58,8 @@
 #define EXYNOS4_GPIO_PART4_BASE		DEVICE_NOT_AVAILABLE
 
 /* EXYNOS5 */
+#define EXYNOS5_I2C_SPACING		0x10000
+
 #define EXYNOS5_GPIO_PART4_BASE		0x03860000
 #define EXYNOS5_PRO_ID			0x10000000
 #define EXYNOS5_CLOCK_BASE		0x10010000
@@ -76,6 +79,7 @@
 #define EXYNOS5_MMC_BASE		0x12200000
 #define EXYNOS5_SROMC_BASE		0x12250000
 #define EXYNOS5_UART_BASE		0x12C00000
+#define EXYNOS5_I2C_BASE		0x12C60000
 #define EXYNOS5_PWMTIMER_BASE		0x12DD0000
 #define EXYNOS5_GPIO_PART2_BASE		0x13400000
 #define EXYNOS5_FIMD_BASE		0x14400000
@@ -148,6 +152,7 @@ SAMSUNG_BASE(adc, ADC_BASE)
 SAMSUNG_BASE(clock, CLOCK_BASE)
 SAMSUNG_BASE(sysreg, SYSREG_BASE)
 SAMSUNG_BASE(fimd, FIMD_BASE)
+SAMSUNG_BASE(i2c, I2C_BASE)
 SAMSUNG_BASE(mipi_dsim, MIPI_DSIM_BASE)
 SAMSUNG_BASE(gpio_part1, GPIO_PART1_BASE)
 SAMSUNG_BASE(gpio_part2, GPIO_PART2_BASE)
diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h
index 5db25aa88a..b861d7d584 100644
--- a/arch/arm/include/asm/arch-exynos/periph.h
+++ b/arch/arm/include/asm/arch-exynos/periph.h
@@ -30,6 +30,14 @@
  *
  */
 enum periph_id {
+	PERIPH_ID_I2C0,
+	PERIPH_ID_I2C1,
+	PERIPH_ID_I2C2,
+	PERIPH_ID_I2C3,
+	PERIPH_ID_I2C4,
+	PERIPH_ID_I2C5,
+	PERIPH_ID_I2C6,
+	PERIPH_ID_I2C7,
 	PERIPH_ID_SDMMC0,
 	PERIPH_ID_SDMMC1,
 	PERIPH_ID_SDMMC2,
diff --git a/arch/arm/include/asm/arch-mx5/clock.h b/arch/arm/include/asm/arch-mx5/clock.h
index 35ee8155de..36ea03082f 100644
--- a/arch/arm/include/asm/arch-mx5/clock.h
+++ b/arch/arm/include/asm/arch-mx5/clock.h
@@ -49,5 +49,6 @@ void enable_usb_phy2_clk(unsigned char enable);
 void set_usboh3_clk(void);
 void enable_usboh3_clk(unsigned char enable);
 void mxc_set_sata_internal_clock(void);
+int enable_i2c_clk(unsigned char enable, unsigned i2c_num);
 
 #endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
index 8117f4f91a..7f66b61b3c 100644
--- a/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -96,6 +96,7 @@
 #define GPIO5_BASE_ADDR         (AIPS1_BASE_ADDR + 0x000DC000)
 #define GPIO6_BASE_ADDR         (AIPS1_BASE_ADDR + 0x000E0000)
 #define GPIO7_BASE_ADDR         (AIPS1_BASE_ADDR + 0x000E4000)
+#define I2C3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000EC000)
 #define UART4_BASE_ADDR         (AIPS1_BASE_ADDR + 0x000F0000)
 #endif
 /*
diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h
index b91d8bf450..c55c18d51b 100644
--- a/arch/arm/include/asm/arch-mx6/clock.h
+++ b/arch/arm/include/asm/arch-mx6/clock.h
@@ -48,5 +48,6 @@ u32 imx_get_fecclk(void);
 unsigned int mxc_get_clock(enum mxc_clock clk);
 void enable_usboh3_clk(unsigned char enable);
 int enable_sata_clock(void);
+int enable_i2c_clk(unsigned char enable, unsigned i2c_num);
 
 #endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/include/asm/arch-mx6/mx6x_pins.h b/arch/arm/include/asm/arch-mx6/mx6x_pins.h
index cf9103c3d2..3d66d64d20 100644
--- a/arch/arm/include/asm/arch-mx6/mx6x_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6x_pins.h
@@ -22,7 +22,7 @@
 #ifndef __ASM_ARCH_MX6_MX6X_PINS_H__
 #define __ASM_ARCH_MX6_MX6X_PINS_H__
 
-#include <asm/arch/iomux-v3.h>
+#include <asm/imx-common/iomux-v3.h>
 
 /* Use to set PAD control */
 #define PAD_CTL_HYS		(1 << 16)
diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h
index ca978c9bbc..0f75c311f5 100644
--- a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h
+++ b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h
@@ -343,16 +343,6 @@ struct s3c24x0_watchdog {
 	u32	wtcnt;
 };
 
-
-/* IIC (see manual chapter 20) */
-struct s3c24x0_i2c {
-	u32	iiccon;
-	u32	iicstat;
-	u32	iicadd;
-	u32	iicds;
-};
-
-
 /* IIS (see manual chapter 21) */
 struct s3c24x0_i2s {
 #ifdef __BIG_ENDIAN
diff --git a/arch/arm/include/asm/arch-mx6/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index 788b413219..788b413219 100644
--- a/arch/arm/include/asm/arch-mx6/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
diff --git a/arch/arm/include/asm/imx-common/mxc_i2c.h b/arch/arm/include/asm/imx-common/mxc_i2c.h
new file mode 100644
index 0000000000..9a5187d464
--- /dev/null
+++ b/arch/arm/include/asm/imx-common/mxc_i2c.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __ASM_ARCH_MXC_MXC_I2C_H__
+#define __ASM_ARCH_MXC_MXC_I2C_H__
+#include <asm/imx-common/iomux-v3.h>
+
+struct i2c_pin_ctrl {
+	iomux_v3_cfg_t i2c_mode;
+	iomux_v3_cfg_t gpio_mode;
+	unsigned char gp;
+	unsigned char spare;
+};
+
+struct i2c_pads_info {
+	struct i2c_pin_ctrl scl;
+	struct i2c_pin_ctrl sda;
+};
+
+void setup_i2c(unsigned i2c_index, int speed, int slave_addr,
+		struct i2c_pads_info *p);
+void bus_i2c_init(void *base, int speed, int slave_addr,
+		int (*idle_bus_fn)(void *p), void *p);
+int bus_i2c_read(void *base, uchar chip, uint addr, int alen, uchar *buf,
+		int len);
+int bus_i2c_write(void *base, uchar chip, uint addr, int alen,
+		const uchar *buf, int len);
+#endif