Merge git://git.denx.de/u-boot-fsl-qoriq

27 files changed, 978 insertions, 164 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 53eae8953e..bb64b9c160 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -808,6 +808,19 @@ config TARGET_LS2080A_SIMU
 	  development platform that supports the QorIQ LS2080A
 	  Layerscape Architecture processor.
 
+config TARGET_LS1088AQDS
+	bool "Support ls1088aqds"
+	select ARCH_LS1088A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select ARCH_MISC_INIT
+	select BOARD_LATE_INIT
+	help
+	  Support for NXP LS1088AQDS platform
+	  The LS1088A Development System (QDS) is a high-performance
+	  development platform that supports the QorIQ LS1088A
+	  Layerscape Architecture processor.
+
 config TARGET_LS2080AQDS
 	bool "Support ls2080aqds"
 	select ARCH_LS2080A
@@ -909,6 +922,19 @@ config TARGET_LS1012AFRDM
 	  development platform that supports the QorIQ LS1012A
 	  Layerscape Architecture processor.
 
+config TARGET_LS1088ARDB
+	bool "Support ls1088ardb"
+	select ARCH_LS1088A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select ARCH_MISC_INIT
+	select BOARD_LATE_INIT
+	help
+	  Support for NXP LS1088ARDB platform.
+	  The LS1088A Reference design board (RDB) is a high-performance
+	  development platform that supports the QorIQ LS1088A
+	  Layerscape Architecture processor.
+
 config TARGET_LS1021AQDS
 	bool "Support ls1021aqds"
 	select BOARD_LATE_INIT
@@ -1192,6 +1218,7 @@ source "board/creative/xfi3/Kconfig"
 source "board/freescale/ls2080a/Kconfig"
 source "board/freescale/ls2080aqds/Kconfig"
 source "board/freescale/ls2080ardb/Kconfig"
+source "board/freescale/ls1088a/Kconfig"
 source "board/freescale/ls1021aqds/Kconfig"
 source "board/freescale/ls1043aqds/Kconfig"
 source "board/freescale/ls1021atwr/Kconfig"
diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig
index fadfce4f05..20e2b1a50a 100644
--- a/arch/arm/cpu/armv7/ls102xa/Kconfig
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -2,9 +2,14 @@ config ARCH_LS1021A
 	bool
 	select SYS_FSL_ERRATUM_A008378
 	select SYS_FSL_ERRATUM_A008407
+	select SYS_FSL_ERRATUM_A008997
+	select SYS_FSL_ERRATUM_A009007
+	select SYS_FSL_ERRATUM_A009008
 	select SYS_FSL_ERRATUM_A009663
+	select SYS_FSL_ERRATUM_A009798
 	select SYS_FSL_ERRATUM_A009942
 	select SYS_FSL_ERRATUM_A010315
+	select SYS_FSL_HAS_CCI400
 	select SYS_FSL_SRDS_1
 	select SYS_HAS_SERDES
 	select SYS_FSL_DDR_BE if SYS_FSL_DDR
@@ -49,9 +54,40 @@ config SECURE_BOOT
 		Enable Freescale Secure Boot feature. Normally selected
 		by defconfig. If unsure, do not change.
 
+config SYS_CCI400_OFFSET
+	hex "Offset for CCI400 base"
+	depends on SYS_FSL_HAS_CCI400
+	default 0x180000
+	help
+	  Offset for CCI400 base.
+	  CCI400 base addr = CCSRBAR + CCI400_OFFSET
+
+config SYS_FSL_ERRATUM_A008997
+	bool
+	help
+	  Workaround for USB PHY erratum A008997
+
+config SYS_FSL_ERRATUM_A009007
+	bool
+	help
+	  Workaround for USB PHY erratum A009007
+
+config SYS_FSL_ERRATUM_A009008
+	bool
+	help
+	  Workaround for USB PHY erratum A009008
+
+config SYS_FSL_ERRATUM_A009798
+	bool
+	help
+	  Workaround for USB PHY erratum A009798
+
 config SYS_FSL_ERRATUM_A010315
 	bool "Workaround for PCIe erratum A010315"
 
+config SYS_FSL_HAS_CCI400
+	bool
+
 config SYS_FSL_SRDS_1
 	bool
 
diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c
index b84a1a686a..e10037d711 100644
--- a/arch/arm/cpu/armv7/ls102xa/soc.c
+++ b/arch/arm/cpu/armv7/ls102xa/soc.c
@@ -60,6 +60,50 @@ unsigned int get_soc_major_rev(void)
 	return major;
 }
 
+static void erratum_a009008(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009008
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+
+	clrsetbits_be32(scfg + SCFG_USB3PRM1CR / 4,
+			0xF << 6,
+			SCFG_USB_TXVREFTUNE << 6);
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009008 */
+}
+
+static void erratum_a009798(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009798
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+
+	clrbits_be32(scfg + SCFG_USB3PRM1CR / 4,
+			SCFG_USB_SQRXTUNE_MASK << 23);
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009798 */
+}
+
+static void erratum_a008997(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008997
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+
+	clrsetbits_be32(scfg + SCFG_USB3PRM2CR / 4,
+			SCFG_USB_PCSTXSWINGFULL_MASK,
+			SCFG_USB_PCSTXSWINGFULL_VAL);
+#endif /* CONFIG_SYS_FSL_ERRATUM_A008997 */
+}
+
+static void erratum_a009007(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009007
+	void __iomem *usb_phy = (void __iomem *)USB_PHY_BASE;
+
+	out_le16(usb_phy + USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_1);
+	out_le16(usb_phy + USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_2);
+	out_le16(usb_phy + USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_3);
+	out_le16(usb_phy + USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_4);
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009007 */
+}
+
 void s_init(void)
 {
 }
@@ -80,7 +124,8 @@ void erratum_a010315(void)
 int arch_soc_init(void)
 {
 	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
-	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
+	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR +
+					CONFIG_SYS_CCI400_OFFSET);
 	unsigned int major;
 
 #ifdef CONFIG_LAYERSCAPE_NS_ACCESS
@@ -146,6 +191,12 @@ int arch_soc_init(void)
 	 */
 	out_be32(&scfg->eddrtqcfg, 0x63b20042);
 
+	/* Erratum */
+	erratum_a009008();
+	erratum_a009798();
+	erratum_a008997();
+	erratum_a009007();
+
 	return 0;
 }
 
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index 8e4c3dd8f2..12aba9d4e9 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -88,6 +88,7 @@ config PSCI_RESET
 	depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && !TARGET_LS2080A_EMU && \
 		   !TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \
 		   !TARGET_LS2080ARDB && !TARGET_LS1012AQDS && \
+		   !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
 		   !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
 		   !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \
 		   !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index cdeef26fe5..3518d8601d 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -16,8 +16,12 @@ config ARCH_LS1043A
 	select SYS_FSL_DDR_BE
 	select SYS_FSL_DDR_VER_50
 	select SYS_FSL_ERRATUM_A008850
+	select SYS_FSL_ERRATUM_A008997
+	select SYS_FSL_ERRATUM_A009007
+	select SYS_FSL_ERRATUM_A009008
 	select SYS_FSL_ERRATUM_A009660
 	select SYS_FSL_ERRATUM_A009663
+	select SYS_FSL_ERRATUM_A009798
 	select SYS_FSL_ERRATUM_A009929
 	select SYS_FSL_ERRATUM_A009942
 	select SYS_FSL_ERRATUM_A010315
@@ -39,6 +43,10 @@ config ARCH_LS1046A
 	select SYS_FSL_ERRATUM_A008336
 	select SYS_FSL_ERRATUM_A008511
 	select SYS_FSL_ERRATUM_A008850
+	select SYS_FSL_ERRATUM_A008997
+	select SYS_FSL_ERRATUM_A009007
+	select SYS_FSL_ERRATUM_A009008
+	select SYS_FSL_ERRATUM_A009798
 	select SYS_FSL_ERRATUM_A009801
 	select SYS_FSL_ERRATUM_A009803
 	select SYS_FSL_ERRATUM_A009942
@@ -50,6 +58,32 @@ config ARCH_LS1046A
 	select BOARD_EARLY_INIT_F
 	imply SCSI
 
+config ARCH_LS1088A
+	bool
+	select ARMV8_SET_SMPEN
+	select FSL_LSCH3
+	select SYS_FSL_DDR
+	select SYS_FSL_DDR_LE
+	select SYS_FSL_DDR_VER_50
+	select SYS_FSL_EC1
+	select SYS_FSL_EC2
+	select SYS_FSL_ERRATUM_A009803
+	select SYS_FSL_ERRATUM_A009942
+	select SYS_FSL_ERRATUM_A010165
+	select SYS_FSL_ERRATUM_A008511
+	select SYS_FSL_ERRATUM_A008850
+	select SYS_FSL_HAS_CCI400
+	select SYS_FSL_HAS_DDR4
+	select SYS_FSL_HAS_RGMII
+	select SYS_FSL_HAS_SEC
+	select SYS_FSL_SEC_COMPAT_5
+	select SYS_FSL_SEC_LE
+	select SYS_FSL_SRDS_1
+	select SYS_FSL_SRDS_2
+	select FSL_TZASC_1
+	select ARCH_EARLY_INIT_R
+	select BOARD_EARLY_INIT_F
+
 config ARCH_LS2080A
 	bool
 	select ARMV8_SET_SMPEN
@@ -61,6 +95,7 @@ config ARCH_LS2080A
 	select SYS_FSL_DDR
 	select SYS_FSL_DDR_LE
 	select SYS_FSL_DDR_VER_50
+	select SYS_FSL_HAS_CCN504
 	select SYS_FSL_HAS_DP_DDR
 	select SYS_FSL_HAS_SEC
 	select SYS_FSL_HAS_DDR4
@@ -73,8 +108,12 @@ config ARCH_LS2080A
 	select SYS_FSL_ERRATUM_A008511
 	select SYS_FSL_ERRATUM_A008514
 	select SYS_FSL_ERRATUM_A008585
+	select SYS_FSL_ERRATUM_A008997
+	select SYS_FSL_ERRATUM_A009007
+	select SYS_FSL_ERRATUM_A009008
 	select SYS_FSL_ERRATUM_A009635
 	select SYS_FSL_ERRATUM_A009663
+	select SYS_FSL_ERRATUM_A009798
 	select SYS_FSL_ERRATUM_A009801
 	select SYS_FSL_ERRATUM_A009803
 	select SYS_FSL_ERRATUM_A009942
@@ -85,6 +124,7 @@ config ARCH_LS2080A
 
 config FSL_LSCH2
 	bool
+	select SYS_FSL_HAS_CCI400
 	select SYS_FSL_HAS_SEC
 	select SYS_FSL_SEC_COMPAT_5
 	select SYS_FSL_SEC_BE
@@ -98,7 +138,7 @@ config FSL_LSCH3
 
 config FSL_MC_ENET
 	bool "Management Complex network"
-	depends on ARCH_LS2080A
+	depends on ARCH_LS2080A || ARCH_LS1088A
 	default y
 	select RESV_RAM
 	help
@@ -114,6 +154,7 @@ config FSL_PCIE_COMPAT
 	default "fsl,ls1043a-pcie" if ARCH_LS1043A
 	default "fsl,ls1046a-pcie" if ARCH_LS1046A
 	default "fsl,ls2080a-pcie" if ARCH_LS2080A
+	default "fsl,ls1088a-pcie" if ARCH_LS1088A
 	help
 	  This compatible is used to find pci controller node in Kernel DT
 	  to complete fixup.
@@ -182,6 +223,7 @@ config SYS_LS_PPA_FW_ADDR
 	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
 	default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
 	default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
+	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
 	default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
 	default 0x400000 if SYS_LS_PPA_FW_IN_MMC
 	default 0x400000 if SYS_LS_PPA_FW_IN_NAND
@@ -195,12 +237,13 @@ config SYS_LS_PPA_FW_ADDR
 config SYS_LS_PPA_ESBC_ADDR
 	hex "hdr address of PPA firmware loading from"
 	depends on FSL_LS_PPA && CHAIN_OF_TRUST
-	default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
-	default 0x40740000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
-	default 0x40480000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
-	default 0x580c40000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3
-	default 0x700000 if SYS_LS_PPA_FW_IN_MMC
-	default 0x700000 if SYS_LS_PPA_FW_IN_NAND
+	default 0x60680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
+	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
+	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
+	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
+	default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC
+	default 0x680000 if SYS_LS_PPA_FW_IN_NAND
 	help
 	  If the PPA header firmware locate at XIP flash, such as NOR or
 	  QSPI flash, this address is a directly memory-mapped.
@@ -217,6 +260,20 @@ config LS_PPA_ESBC_HDR_SIZE
 
 endmenu
 
+config SYS_FSL_ERRATUM_A008997
+	bool "Workaround for USB PHY erratum A008997"
+
+config SYS_FSL_ERRATUM_A009007
+	bool
+	help
+	  Workaround for USB PHY erratum A009007
+
+config SYS_FSL_ERRATUM_A009008
+	bool "Workaround for USB PHY erratum A009008"
+
+config SYS_FSL_ERRATUM_A009798
+	bool "Workaround for USB PHY erratum A009798"
+
 config SYS_FSL_ERRATUM_A010315
 	bool "Workaround for PCIe erratum A010315"
 
@@ -228,6 +285,7 @@ config MAX_CPUS
 	default 4 if ARCH_LS1043A
 	default 4 if ARCH_LS1046A
 	default 16 if ARCH_LS2080A
+	default 8 if ARCH_LS1088A
 	default 1
 	help
 	  Set this number to the maximum number of possible CPUs in the SoC.
@@ -248,12 +306,27 @@ config QSPI_AHB_INIT
 	  But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB
 	  bus for those flashes to support the full QSPI flash size.
 
+config SYS_CCI400_OFFSET
+	hex "Offset for CCI400 base"
+	depends on SYS_FSL_HAS_CCI400
+	default 0x3090000 if ARCH_LS1088A
+	default 0x180000 if FSL_LSCH2
+	help
+	  Offset for CCI400 base
+	  CCI400 base addr = CCSRBAR + CCI400_OFFSET
+
 config SYS_FSL_IFC_BANK_COUNT
 	int "Maximum banks of Integrated flash controller"
-	depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
+	depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A || ARCH_LS1088A
 	default 4 if ARCH_LS1043A
 	default 4 if ARCH_LS1046A
-	default 8 if ARCH_LS2080A
+	default 8 if ARCH_LS2080A || ARCH_LS1088A
+
+config SYS_FSL_HAS_CCI400
+	bool
+
+config SYS_FSL_HAS_CCN504
+	bool
 
 config SYS_FSL_HAS_DP_DDR
 	bool
@@ -296,6 +369,7 @@ config SYS_FSL_PCLK_DIV
 	int "Platform clock divider"
 	default 1 if ARCH_LS1043A
 	default 1 if ARCH_LS1046A
+	default 1 if ARCH_LS1088A
 	default 2
 	help
 	  This is the divider that is used to derive Platform clock from
@@ -362,6 +436,18 @@ config RESV_RAM
 	  be at the high end of physical memory. The reserve RAM may be
 	  excluded from memory bank(s) passed to OS, or marked as reserved.
 
+config SYS_FSL_EC1
+	bool
+	help
+	  Ethernet controller 1, this is connected to MAC3.
+	  Provides DPAA2 capabilities
+
+config SYS_FSL_EC2
+	bool
+	help
+	  Ethernet controller 2, this is connected to MAC4.
+	  Provides DPAA2 capabilities
+
 config SYS_FSL_ERRATUM_A008336
 	bool
 
@@ -386,10 +472,17 @@ config SYS_FSL_ERRATUM_A009660
 config SYS_FSL_ERRATUM_A009929
 	bool
 
+
+config SYS_FSL_HAS_RGMII
+	bool
+	depends on SYS_FSL_EC1 || SYS_FSL_EC2
+
+
 config SYS_MC_RSV_MEM_ALIGN
 	hex "Management Complex reserved memory alignment"
 	depends on RESV_RAM
-	default 0x20000000
+	default 0x20000000 if ARCH_LS2080A
+	default 0x70000000 if ARCH_LS1088A
 	help
 	  Reserved memory needs to be aligned for MC to use. Default value
 	  is 512MB.
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index e3ce0184d8..115c3fc1d1 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -38,3 +38,7 @@ endif
 ifneq ($(CONFIG_ARCH_LS1046A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls1046a_serdes.o
 endif
+
+ifneq ($(CONFIG_ARCH_LS1088A),)
+obj-$(CONFIG_SYS_HAS_SERDES) += ls1088a_serdes.o
+endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index c6fede31ba..d21a49454e 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -16,6 +16,7 @@
 #include <asm/arch/soc.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/speed.h>
+#include <fsl_immap.h>
 #include <asm/arch/mp.h>
 #include <efi_loader.h>
 #include <fm_eth.h>
@@ -516,6 +517,10 @@ int arch_early_init_r(void)
 			printf("Did not wake secondary cores\n");
 	}
 
+#ifdef CONFIG_SYS_FSL_HAS_RGMII
+	fsl_rgmii_init();
+#endif
+
 #ifdef CONFIG_SYS_HAS_SERDES
 	fsl_serdes_init();
 #endif
@@ -614,13 +619,22 @@ void efi_reset_system_init(void)
 
 #endif
 
+/*
+ * Calculate reserved memory with given memory bank
+ * Return aligned memory size on success
+ * Return (ram_size + needed size) for failure
+ */
 phys_size_t board_reserve_ram_top(phys_size_t ram_size)
 {
 	phys_size_t ram_top = ram_size;
 
 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
+	ram_top = mc_get_dram_block_size();
+	if (ram_top > ram_size)
+		return ram_size + ram_top;
+
+	ram_top = ram_size - ram_top;
 	/* The start address of MC reserved memory needs to be aligned. */
-	ram_top -= mc_get_dram_block_size();
 	ram_top &= ~(CONFIG_SYS_MC_RSV_MEM_ALIGN - 1);
 #endif
 
@@ -664,8 +678,8 @@ phys_size_t get_effective_memsize(void)
 	/* Check if we have enough memory for MC */
 	if (rem < board_reserve_ram_top(rem)) {
 		/* Not enough memory in high region to reserve */
-		if (ea_size > board_reserve_ram_top(rem))
-			ea_size -= board_reserve_ram_top(rem);
+		if (ea_size > board_reserve_ram_top(ea_size))
+			ea_size -= board_reserve_ram_top(ea_size);
 		else
 			printf("Error: No enough space for reserved memory.\n");
 	}
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
index 3ae16ae7ad..276ab9052d 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
@@ -1,11 +1,12 @@
 SoC overview
 
 	1. LS1043A
-	2. LS2080A
-	3. LS1012A
-	4. LS1046A
-	5. LS2088A
-	6. LS2081A
+	2. LS1088A
+	3. LS2080A
+	4. LS1012A
+	5. LS1046A
+	6. LS2088A
+	7. LS2081A
 
 LS1043A
 ---------
@@ -45,6 +46,38 @@ The LS1043A SoC includes the following function and features:
    - Integrated flash controller supporting NAND and NOR flash
  - QorIQ platform's trust architecture 2.1
 
+LS1088A
+--------
+The QorIQ LS1088A processor is built on the Layerscape
+architecture combining eight ARM A53 processor cores
+with advanced, high-performance datapath acceleration
+and networks, peripheral interfaces required for
+networking, wireless infrastructure, and general-purpose
+embedded applications.
+
+LS1088A is compliant with the Layerscape Chassis Generation 3.
+
+Features summary:
+ - 8 32-bit / 64-bit ARM v8 Cortex-A53 CPUs
+ - Cores are in 2 cluster of 4-cores each
+ - 1MB L2 - Cache per cluster
+ - Cache coherent interconnect (CCI-400)
+ - 1 64-bit DDR4 SDRAM memory controller with ECC
+ - Data path acceleration architecture 2.0 (DPAA2)
+ - 4-Lane 10GHz SerDes comprising of WRIOP
+ - 4-Lane 10GHz SerDes comprising of PCI, SATA, uQE(TDM/HLDC/UART)
+ - Ethernet interfaces: SGMIIs, RGMIIs, QSGMIIs, XFIs
+ - QSPI, SPI, IFC2.0 supporting NAND, NOR flash
+ - 3 PCIe3.0 , 1 SATA3.0, 2 USB3.0, 1 SDXC, 2 DUARTs etc
+ - 2 DUARTs
+ - 4 I2C, GPIO
+ - Thermal monitor unit(TMU)
+ - 4 Flextimers and 1 generic timer
+ - Support for hardware virtualization and partitioning enforcement
+ - QorIQ platform's trust architecture 3.0
+ - Service processor (SP) provides pre-boot initialization and secure-boot
+   capabilities
+
 LS2080A
 --------
 The LS2080A integrated multicore processor combines eight ARM Cortex-A57
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
index c9252751db..cae59da803 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
@@ -418,7 +418,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 #ifdef CONFIG_SYS_DPAA_FMAN
 	fdt_fixup_fman_firmware(blob);
 #endif
-#ifndef CONFIG_LS1012A
+#ifndef CONFIG_ARCH_LS1012A
 	fsl_fdt_disable_usb(blob);
 #endif
 #ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
index ef97556367..179cac6e49 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
@@ -28,6 +28,20 @@ __weak void wriop_init_dpmac_qsgmii(int sd, int lane_prtcl)
 	return;
 }
 
+/*
+ *The return value of this func is the serdes protocol used.
+ *Typically this function is called number of times depending
+ *upon the number of serdes blocks in the Silicon.
+ *Zero is used to denote that no serdes was enabled,
+ *this is the case when golden RCW was used where DPAA2 bring was
+ *intentionally removed to achieve boot to prompt
+*/
+
+__weak int serdes_get_number(int serdes, int cfg)
+{
+	return cfg;
+}
+
 int is_serdes_configured(enum srds_prtcl device)
 {
 	int ret = 0;
@@ -73,6 +87,9 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
 		printf("invalid SerDes%d\n", sd);
 		break;
 	}
+
+	cfg = serdes_get_number(sd, cfg);
+
 	/* Is serdes enabled at all? */
 	if (cfg == 0)
 		return -ENODEV;
@@ -99,6 +116,8 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask,
 
 	cfg = gur_in32(&gur->rcwsr[rcwsr - 1]) & sd_prctl_mask;
 	cfg >>= sd_prctl_shift;
+
+	cfg = serdes_get_number(sd, cfg);
 	printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
 
 	if (!is_serdes_prtcl_valid(sd, cfg))
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
index 3136e3f3a2..fa93096c68 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
@@ -76,7 +76,7 @@ ENTRY(lowlevel_init)
 	switch_el x1, 1f, 100f, 100f	/* skip if not in EL3 */
 1:
 
-#ifdef CONFIG_FSL_LSCH3
+#if defined (CONFIG_SYS_FSL_HAS_CCN504)
 
 	/* Set Wuo bit for RN-I 20 */
 #ifdef CONFIG_ARCH_LS2080A
@@ -171,7 +171,7 @@ ENTRY(lowlevel_init)
 	ldr	x0, =CCI_S2_QOS_CONTROL_BASE(20)
 	ldr	x1, =0x00FF000C
 	bl	ccn504_set_qos
-#endif
+#endif /* CONFIG_SYS_FSL_HAS_CCN504 */
 
 #ifdef SMMU_BASE
 	/* Set the SMMU page size in the sACR register */
@@ -338,7 +338,9 @@ get_svr:
 	ldr	x1, =FSL_LSCH3_SVR
 	ldr	w0, [x1]
 	ret
+#endif
 
+#ifdef CONFIG_SYS_FSL_HAS_CCN504
 hnf_pstate_poll:
 	/* x0 has the desired status, return 0 for success, 1 for timeout
 	 * clobber x1, x2, x3, x4, x6, x7
@@ -394,9 +396,6 @@ ENTRY(__asm_flush_l3_dcache)
 	mov	x29, lr
 	mov	x8, #0
 
-	switch_el x0, 1f, 100f, 100f	/* skip if not in EL3 */
-
-1:
 	dsb	sy
 	mov	x0, #0x1		/* HNFPSTAT_SFONLY */
 	bl	hnf_set_pstate
@@ -414,13 +413,12 @@ ENTRY(__asm_flush_l3_dcache)
 	bl	hnf_pstate_poll
 	cbz	x0, 1f
 	add	x8, x8, #0x2
-100:
 1:
 	mov	x0, x8
 	mov	lr, x29
 	ret
 ENDPROC(__asm_flush_l3_dcache)
-#endif
+#endif /* CONFIG_SYS_FSL_HAS_CCN504 */
 
 #ifdef CONFIG_MP
 	/* Keep literals not used by the secondary boot code outside it */
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c
new file mode 100644
index 0000000000..9f5cdd5710
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+
+struct serdes_config {
+	u8 ip_protocol;
+	u8 lanes[SRDS_MAX_LANES];
+	u8 rcw_lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+	/* SerDes 1 */
+	{0x12, {SGMII3, SGMII7, SGMII1, SGMII2 }, {3, 3, 3, 3 }  },
+	{0x15, {SGMII3, SGMII7, XFI1, XFI2 }, {3, 3, 1, 1 } },
+	{0x16, {SGMII3, SGMII7, SGMII1, XFI2 }, {3, 3, 3, 1 } },
+	{0x17, {SGMII3, SGMII7, SGMII1, SGMII2 }, {3, 3, 3, 2 } },
+	{0x18, {SGMII3, SGMII7, SGMII1, SGMII2 }, {3, 3, 2, 2 } },
+	{0x19, {SGMII3, QSGMII_B, XFI1, XFI2}, {3, 4, 1, 1 } },
+	{0x1A, {SGMII3, QSGMII_B, SGMII1, XFI2 }, {3, 4, 3, 1 } },
+	{0x1B, {SGMII3, QSGMII_B, SGMII1, SGMII2 }, {3, 4, 3, 2 } },
+	{0x1C, {SGMII3, QSGMII_B, SGMII1, SGMII2 }, {3, 4, 2, 2 } },
+	{0x1D, {QSGMII_A, QSGMII_B, XFI1, XFI2 }, {4, 4, 1, 1 } },
+	{0x1E, {QSGMII_A, QSGMII_B, SGMII1, XFI2  }, {4, 4, 3, 1 } },
+	{0x1F, {QSGMII_A, QSGMII_B, SGMII1, SGMII2  }, {4, 4, 3, 2 } },
+	{0x20, {QSGMII_A, QSGMII_B, SGMII1, SGMII2 }, {4, 4, 2, 2 } },
+	{0x35, {SGMII3, QSGMII_B, SGMII1, SGMII2 }, {3, 4, 3, 3 } },
+	{0x36, {QSGMII_A, QSGMII_B, SGMII1, SGMII2 }, {4, 4, 3, 3 } },
+	{0x3A, {SGMII3, PCIE1, SGMII1, SGMII2 }, {3, 5, 3, 3 } },
+		{}
+};
+static struct serdes_config serdes2_cfg_tbl[] = {
+	/* SerDes 2 */
+	{0x0C, {PCIE1, PCIE1, PCIE1, PCIE1 }, {8, 8, 8, 8 } },
+	{0x0D, {PCIE1, PCIE2, PCIE3, SATA1 }, {5, 5, 5, 9 }  },
+	{0x0E, {PCIE1, PCIE1, PCIE2, SATA1 }, {7, 7, 6, 9 }  },
+	{0x13, {PCIE1, PCIE1, PCIE3, PCIE3 }, {7, 7, 7, 7 }  },
+	{0x14, {PCIE1, PCIE2, PCIE3, PCIE3 }, {5, 5, 7, 7 }  },
+	{0x3C, {NONE, PCIE2, NONE, PCIE3 }, {0, 5, 0, 6 }  },
+	{}
+};
+
+static struct serdes_config *serdes_cfg_tbl[] = {
+	serdes1_cfg_tbl,
+	serdes2_cfg_tbl,
+};
+
+int serdes_get_number(int serdes, int cfg)
+{
+	struct serdes_config *ptr;
+	int i, j, index, lnk;
+	int is_found, max_lane = SRDS_MAX_LANES;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+
+	while (ptr->ip_protocol) {
+		is_found = 1;
+		for (i = 0, j = max_lane - 1; i < max_lane; i++, j--) {
+			lnk = cfg & (0xf << 4 * i);
+			lnk = lnk >> (4 * i);
+
+			index = (serdes == FSL_SRDS_1) ? j : i;
+
+			if (ptr->rcw_lanes[index] == lnk && is_found)
+				is_found = 1;
+			else
+				is_found = 0;
+		}
+
+		if (is_found)
+			return ptr->ip_protocol;
+		ptr++;
+	}
+
+	return 0;
+}
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->ip_protocol) {
+		if (ptr->ip_protocol == cfg)
+			return ptr->lanes[lane];
+		ptr++;
+	}
+
+	return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->ip_protocol) {
+		if (ptr->ip_protocol == prtcl)
+			break;
+		ptr++;
+	}
+
+	if (!ptr->ip_protocol)
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (ptr->lanes[i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 639e9d2ddc..6698c0467d 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -5,6 +5,7 @@
  */
 
 #include <common.h>
+#include <fsl_immap.h>
 #include <fsl_ifc.h>
 #include <ahci.h>
 #include <scsi.h>
@@ -23,6 +24,7 @@
 #ifdef CONFIG_CHAIN_OF_TRUST
 #include <fsl_validate.h>
 #endif
+#include <fsl_immap.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -52,6 +54,109 @@ bool soc_has_aiop(void)
 	return false;
 }
 
+static inline void set_usb_txvreftune(u32 __iomem *scfg, u32 offset)
+{
+	scfg_clrsetbits32(scfg + offset / 4,
+			0xF << 6,
+			SCFG_USB_TXVREFTUNE << 6);
+}
+
+static void erratum_a009008(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009008
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+	set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB1);
+	set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB2);
+	set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB3);
+#elif defined(CONFIG_ARCH_LS2080A)
+	set_usb_txvreftune(scfg, SCFG_USB3PRM1CR);
+#endif
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009008 */
+}
+
+static inline void set_usb_sqrxtune(u32 __iomem *scfg, u32 offset)
+{
+	scfg_clrbits32(scfg + offset / 4,
+			SCFG_USB_SQRXTUNE_MASK << 23);
+}
+
+static void erratum_a009798(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009798
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+	set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB1);
+	set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB2);
+	set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB3);
+#elif defined(CONFIG_ARCH_LS2080A)
+	set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR);
+#endif
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009798 */
+}
+
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+static inline void set_usb_pcstxswingfull(u32 __iomem *scfg, u32 offset)
+{
+	scfg_clrsetbits32(scfg + offset / 4,
+			0x7F << 9,
+			SCFG_USB_PCSTXSWINGFULL << 9);
+}
+#endif
+
+static void erratum_a008997(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008997
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+
+	set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB1);
+	set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB2);
+	set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB3);
+#endif
+#endif /* CONFIG_SYS_FSL_ERRATUM_A008997 */
+}
+
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+
+#define PROGRAM_USB_PHY_RX_OVRD_IN_HI(phy)	\
+	out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_1);	\
+	out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_2);	\
+	out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_3);	\
+	out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_4)
+
+#elif defined(CONFIG_ARCH_LS2080A)
+
+#define PROGRAM_USB_PHY_RX_OVRD_IN_HI(phy)	\
+	out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_1); \
+	out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_2); \
+	out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_3); \
+	out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_4)
+
+#endif
+
+static void erratum_a009007(void)
+{
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+	void __iomem *usb_phy = (void __iomem *)SCFG_USB_PHY1;
+
+	PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy);
+
+	usb_phy = (void __iomem *)SCFG_USB_PHY2;
+	PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy);
+
+	usb_phy = (void __iomem *)SCFG_USB_PHY3;
+	PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy);
+#elif defined(CONFIG_ARCH_LS2080A)
+	void __iomem *dcsr = (void __iomem *)DCSR_BASE;
+
+	PROGRAM_USB_PHY_RX_OVRD_IN_HI(dcsr + DCSR_USB_PHY1);
+	PROGRAM_USB_PHY_RX_OVRD_IN_HI(dcsr + DCSR_USB_PHY2);
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009007 */
+}
+
 #if defined(CONFIG_FSL_LSCH3)
 /*
  * This erratum requires setting a value to eddrtqcr1 to
@@ -198,6 +303,10 @@ void fsl_lsch3_early_init_f(void)
 #endif
 	erratum_a008514();
 	erratum_a008336();
+	erratum_a009008();
+	erratum_a009798();
+	erratum_a008997();
+	erratum_a009007();
 #ifdef CONFIG_CHAIN_OF_TRUST
 	/* In case of Secure Boot, the IBR configures the SMMU
 	* to allow only Secure transactions.
@@ -285,7 +394,8 @@ static void erratum_a008850_early(void)
 {
 #ifdef CONFIG_SYS_FSL_ERRATUM_A008850
 	/* part 1 of 2 */
-	struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR;
+	struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR +
+						CONFIG_SYS_CCI400_OFFSET);
 	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
 
 	/* Skip if running at lower exception level */
@@ -304,7 +414,8 @@ void erratum_a008850_post(void)
 {
 #ifdef CONFIG_SYS_FSL_ERRATUM_A008850
 	/* part 2 of 2 */
-	struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR;
+	struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR +
+						CONFIG_SYS_CCI400_OFFSET);
 	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
 	u32 tmp;
 
@@ -439,7 +550,8 @@ int setup_chip_volt(void)
 
 void fsl_lsch2_early_init_f(void)
 {
-	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
+	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR +
+					CONFIG_SYS_CCI400_OFFSET);
 	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
 
 #ifdef CONFIG_LAYERSCAPE_NS_ACCESS
@@ -473,6 +585,10 @@ void fsl_lsch2_early_init_f(void)
 	erratum_a009929();
 	erratum_a009660();
 	erratum_a010539();
+	erratum_a009008();
+	erratum_a009798();
+	erratum_a008997();
+	erratum_a009007();
 }
 #endif
 
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 1d6cee2b40..10d397d700 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -188,7 +188,9 @@ dtb-$(CONFIG_ARCH_LS1021A) += ls1021a-qds-duart.dtb \
 dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
 	fsl-ls2080a-rdb.dtb \
 	fsl-ls2081a-rdb.dtb \
-	fsl-ls2088a-rdb-qspi.dtb
+	fsl-ls2088a-rdb-qspi.dtb \
+	fsl-ls1088a-rdb.dtb \
+	fsl-ls1088a-qds.dtb
 dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
 	fsl-ls1043a-qds-lpuart.dtb \
 	fsl-ls1043a-rdb.dtb \
diff --git a/arch/arm/dts/fsl-ls1088a-qds.dts b/arch/arm/dts/fsl-ls1088a-qds.dts
new file mode 100644
index 0000000000..9b7bef42b8
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1088a-qds.dts
@@ -0,0 +1,70 @@
+/*
+ * NXP ls1088a QDS board device tree source
+ *
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+/ {
+	model = "NXP Layerscape 1088a QDS Board";
+	compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
+	aliases {
+		spi0 = &qspi;
+		spi1 = &dspi;
+	};
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash0: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		reg = <0>;
+		spi-max-frequency = <1000000>; /* input clock */
+	};
+
+	dflash1: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3500000>;
+		reg = <1>;
+	};
+
+	dflash2: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3500000>;
+		reg = <2>;
+	};
+};
+
+&qspi {
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: s25fs512s@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+
+	qflash1: s25fs512s@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <50000000>;
+		reg = <1>;
+	 };
+};
diff --git a/arch/arm/dts/fsl-ls1088a-rdb.dts b/arch/arm/dts/fsl-ls1088a-rdb.dts
new file mode 100644
index 0000000000..30ceed8212
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1088a-rdb.dts
@@ -0,0 +1,40 @@
+/*
+ * NXP ls1088a RDB board device tree source
+ *
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+/ {
+	model = "NXP Layerscape 1088a RDB Board";
+	compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
+	aliases {
+		spi0 = &qspi;
+	};
+};
+
+&qspi {
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: s25fs512s@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+
+	qflash1: s25fs512s@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <50000000>;
+		reg = <1>;
+	 };
+};
diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
new file mode 100644
index 0000000000..d943a9efa3
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1088a.dtsi
@@ -0,0 +1,126 @@
+/*
+ * NXP ls1088a SOC common device tree source
+ *
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/ {
+	compatible = "fsl,ls1088a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+		      /* DRAM space - 1, size : 2 GB DRAM */
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <1 9 0x4>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
+			     <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
+			     <1 11 0x8>, /* Virtual PPI, active-low */
+			     <1 10 0x8>; /* Hypervisor PPI, active-low */
+	};
+
+	serial0: serial@21c0500 {
+		device_type = "serial";
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21c0500 0x0 0x100>;
+		clock-frequency = <0>;	/* Updated by bootloader */
+		interrupts = <0 32 0x1>; /* edge triggered */
+	};
+
+	serial1: serial@21c0600 {
+		device_type = "serial";
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21c0600 0x0 0x100>;
+		clock-frequency = <0>; 	/* Updated by bootloader */
+		interrupts = <0 32 0x1>; /* edge triggered */
+	};
+
+	fsl_mc: fsl-mc@80c000000 {
+		compatible = "fsl,qoriq-mc";
+		reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
+		      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+	};
+
+	dspi: dspi@2100000 {
+		compatible = "fsl,vf610-dspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2100000 0x0 0x10000>;
+		interrupts = <0 26 0x4>; /* Level high type */
+		num-cs = <6>;
+	};
+
+	qspi: quadspi@1550000 {
+		compatible = "fsl,vf610-qspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x20c0000 0x0 0x10000>,
+			<0x0 0x20000000 0x0 0x10000000>;
+		reg-names = "QuadSPI", "QuadSPI-memory";
+		num-cs = <4>;
+	};
+
+	pcie@3400000 {
+		compatible = "fsl,ls-pcie", "snps,dw-pcie";
+		reg = <0x00 0x03400000 0x0 0x80000   /* dbi registers */
+		       0x00 0x03480000 0x0 0x80000   /* lut registers */
+		       0x00 0x034c0000 0x0 0x40000   /* pf controls registers */
+		       0x20 0x00000000 0x0 0x20000>; /* configuration space */
+		reg-names = "dbi", "lut", "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		num-lanes = <4>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x20 0x00020000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+
+	pcie@3500000 {
+		compatible = "fsl,ls-pcie", "snps,dw-pcie";
+		reg = <0x00 0x03500000 0x0 0x80000   /* dbi registers */
+		       0x00 0x03580000 0x0 0x80000   /* lut registers */
+		       0x00 0x035c0000 0x0 0x40000   /* pf controls registers */
+		       0x28 0x00000000 0x0 0x20000>; /* configuration space */
+		reg-names = "dbi", "lut", "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		num-lanes = <4>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x28 0x00020000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+
+	pcie@3600000 {
+		compatible = "fsl,ls-pcie", "snps,dw-pcie";
+		reg = <0x00 0x03600000 0x0 0x80000   /* dbi registers */
+		       0x00 0x03680000 0x0 0x80000   /* lut registers */
+		       0x00 0x036c0000 0x0 0x40000   /* pf controls registers */
+		       0x30 0x00000000 0x0 0x20000>; /* configuration space */
+		reg-names = "dbi", "lut", "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		num-lanes = <8>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x30 0x00020000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+	};
+};
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 79e94f9f2c..a7098be846 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -116,6 +116,67 @@
 #define CONFIG_SYS_FSL_ERRATUM_A008751
 
 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
+
+#elif defined(CONFIG_ARCH_LS1088A)
+#define CONFIG_SYS_FSL_NUM_CC_PLLS		3
+#define CONFIG_SYS_FSL_CLUSTER_CLOCKS		{ 1, 1 }
+#define CONFIG_GICV3
+#define CONFIG_FSL_TZPC_BP147
+#define CONFIG_FSL_TZASC_400
+#define CONFIG_SYS_PAGE_SIZE		0x10000
+
+#define	SRDS_MAX_LANES	4
+
+/* TZ Protection Controller Definitions */
+#define TZPC_BASE				0x02200000
+#define TZPCR0SIZE_BASE				(TZPC_BASE)
+#define TZPCDECPROT_0_STAT_BASE			(TZPC_BASE + 0x800)
+#define TZPCDECPROT_0_SET_BASE			(TZPC_BASE + 0x804)
+#define TZPCDECPROT_0_CLR_BASE			(TZPC_BASE + 0x808)
+#define TZPCDECPROT_1_STAT_BASE			(TZPC_BASE + 0x80C)
+#define TZPCDECPROT_1_SET_BASE			(TZPC_BASE + 0x810)
+#define TZPCDECPROT_1_CLR_BASE			(TZPC_BASE + 0x814)
+#define TZPCDECPROT_2_STAT_BASE			(TZPC_BASE + 0x818)
+#define TZPCDECPROT_2_SET_BASE			(TZPC_BASE + 0x81C)
+#define TZPCDECPROT_2_CLR_BASE			(TZPC_BASE + 0x820)
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE			0x06000000
+#define GICR_BASE			0x06100000
+
+/* SMMU Defintions */
+#define SMMU_BASE			0x05000000 /* GR0 Base */
+
+/* DDR */
+#define CONFIG_SYS_DDR_BLOCK1_SIZE	((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED		CONFIG_SYS_DDR_BLOCK1_SIZE
+
+#define CONFIG_SYS_FSL_CCSR_GUR_LE
+#define CONFIG_SYS_FSL_CCSR_SCFG_LE
+#define CONFIG_SYS_FSL_ESDHC_LE
+#define CONFIG_SYS_FSL_IFC_LE
+#define CONFIG_SYS_FSL_PEX_LUT_LE
+
+#define CONFIG_SYS_MEMAC_LITTLE_ENDIAN
+
+/* SFP */
+#define CONFIG_SYS_FSL_SFP_VER_3_4
+#define CONFIG_SYS_FSL_SFP_LE
+#define CONFIG_SYS_FSL_SRK_LE
+
+/* Security Monitor */
+#define CONFIG_SYS_FSL_SEC_MON_LE
+
+/* Secure Boot */
+#define CONFIG_ESBC_HDR_LS
+
+/* DCFG - GUR */
+#define CONFIG_SYS_FSL_CCSR_GUR_LE
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC	1
+#define CONFIG_SYS_FSL_OCRAM_BASE	0x18000000 /* initial RAM */
+#define SYS_FSL_OCRAM_SPACE_SIZE	0x00200000 /* 2M space */
+#define CONFIG_SYS_FSL_OCRAM_SIZE	0x00020000 /* Real size 128K */
+
 #elif defined(CONFIG_FSL_LSCH2)
 #define CONFIG_SYS_FSL_OCRAM_BASE		0x10000000 /* initial RAM */
 #define SYS_FSL_OCRAM_SPACE_SIZE		0x00200000 /* 2M space */
@@ -218,7 +279,6 @@
 #define GICC_BASE		0x01420000
 
 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
-
 #else
 #error SoC not defined
 #endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
index c4e5eccd77..a0dac86bab 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
@@ -24,6 +24,10 @@ static struct cpu_type cpu_type_list[] = {
 	CPU_TYPE_ENTRY(LS1026A, LS1026A, 2),
 	CPU_TYPE_ENTRY(LS2040A, LS2040A, 4),
 	CPU_TYPE_ENTRY(LS1012A, LS1012A, 1),
+	CPU_TYPE_ENTRY(LS1088A, LS1088A, 8),
+	CPU_TYPE_ENTRY(LS1084A, LS1084A, 8),
+	CPU_TYPE_ENTRY(LS1048A, LS1048A, 4),
+	CPU_TYPE_ENTRY(LS1044A, LS1044A, 4),
 };
 
 #ifndef CONFIG_SYS_DCACHE_OFF
@@ -199,7 +203,8 @@ static struct mm_region final_map[] = {
 	},
 	{ CONFIG_SYS_FSL_QSPI_BASE1, CONFIG_SYS_FSL_QSPI_BASE1,
 	  CONFIG_SYS_FSL_QSPI_SIZE1,
-	  PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_NON_SHARE
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
 	{ CONFIG_SYS_FSL_QSPI_BASE2, CONFIG_SYS_FSL_QSPI_BASE2,
 	  CONFIG_SYS_FSL_QSPI_SIZE2,
@@ -208,7 +213,8 @@ static struct mm_region final_map[] = {
 	},
 	{ CONFIG_SYS_FSL_IFC_BASE2, CONFIG_SYS_FSL_IFC_BASE2,
 	  CONFIG_SYS_FSL_IFC_SIZE2,
-	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
 	{ CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE,
 	  CONFIG_SYS_FSL_DCSR_SIZE,
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
index a8f9a50501..12fd6b8bdf 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
@@ -9,7 +9,7 @@
 
 #include <config.h>
 
-#ifdef CONFIG_ARCH_LS2080A
+#ifdef CONFIG_FSL_LSCH3
 enum srds_prtcl {
 	/*
 	 * Nobody will check whether the device 'NONE' has been configured,
@@ -158,6 +158,8 @@ void fsl_serdes_init(void);
 int serdes_get_first_lane(u32 sd, enum srds_prtcl device);
 enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
 int is_serdes_prtcl_valid(int serdes, u32 prtcl);
+int serdes_get_number(int serdes, int cfg);
+void fsl_rgmii_init(void);
 
 #ifdef CONFIG_FSL_LSCH2
 const char *serdes_clock_to_string(u32 clock);
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index 4afc338b8e..2561ead7c3 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -15,7 +15,6 @@
 #define CONFIG_SYS_DCSR_COP_CCP_ADDR	(CONFIG_SYS_DCSRBAR + 0x02008040)
 
 #define CONFIG_SYS_FSL_DDR_ADDR			(CONFIG_SYS_IMMR + 0x00080000)
-#define CONFIG_SYS_CCI400_ADDR			(CONFIG_SYS_IMMR + 0x00180000)
 #define CONFIG_SYS_GIC400_ADDR			(CONFIG_SYS_IMMR + 0x00400000)
 #define CONFIG_SYS_IFC_ADDR			(CONFIG_SYS_IMMR + 0x00530000)
 #define SYS_FSL_QSPI_ADDR			(CONFIG_SYS_IMMR + 0x00550000)
@@ -338,6 +337,25 @@ struct ccsr_gur {
 #define SCFG_USBPWRFAULT_USB2_SHIFT	2
 #define SCFG_USBPWRFAULT_USB1_SHIFT	0
 
+#define SCFG_BASE			0x01570000
+#define SCFG_USB3PRM1CR_USB1		0x070
+#define SCFG_USB3PRM2CR_USB1		0x074
+#define SCFG_USB3PRM1CR_USB2		0x07C
+#define SCFG_USB3PRM2CR_USB2		0x080
+#define SCFG_USB3PRM1CR_USB3		0x088
+#define SCFG_USB3PRM2CR_USB3		0x08c
+#define SCFG_USB_TXVREFTUNE			0x9
+#define SCFG_USB_SQRXTUNE_MASK		0x7
+#define SCFG_USB_PCSTXSWINGFULL		0x47
+#define SCFG_USB_PHY1			0x084F0000
+#define SCFG_USB_PHY2			0x08500000
+#define SCFG_USB_PHY3			0x08510000
+#define SCFG_USB_PHY_RX_OVRD_IN_HI		0x200c
+#define USB_PHY_RX_EQ_VAL_1		0x0000
+#define USB_PHY_RX_EQ_VAL_2		0x0080
+#define USB_PHY_RX_EQ_VAL_3		0x0380
+#define USB_PHY_RX_EQ_VAL_4		0x0b80
+
 #define SCFG_SNPCNFGCR_SECRDSNP		0x80000000
 #define SCFG_SNPCNFGCR_SECWRSNP		0x40000000
 #define SCFG_SNPCNFGCR_SATARDSNP	0x00800000
@@ -544,54 +562,6 @@ struct ccsr_serdes {
 	u8	res_19a0[0x2000-0x19a0];	/* from 0x19a0 to 0x1fff */
 };
 
-#define CCI400_CTRLORD_TERM_BARRIER	0x00000008
-#define CCI400_CTRLORD_EN_BARRIER	0
-#define CCI400_SHAORD_NON_SHAREABLE	0x00000002
-#define CCI400_DVM_MESSAGE_REQ_EN	0x00000002
-#define CCI400_SNOOP_REQ_EN		0x00000001
-
-/* CCI-400 registers */
-struct ccsr_cci400 {
-	u32 ctrl_ord;			/* Control Override */
-	u32 spec_ctrl;			/* Speculation Control */
-	u32 secure_access;		/* Secure Access */
-	u32 status;			/* Status */
-	u32 impr_err;			/* Imprecise Error */
-	u8 res_14[0x100 - 0x14];
-	u32 pmcr;			/* Performance Monitor Control */
-	u8 res_104[0xfd0 - 0x104];
-	u32 pid[8];			/* Peripheral ID */
-	u32 cid[4];			/* Component ID */
-	struct {
-		u32 snoop_ctrl;		/* Snoop Control */
-		u32 sha_ord;		/* Shareable Override */
-		u8 res_1008[0x1100 - 0x1008];
-		u32 rc_qos_ord;		/* read channel QoS Value Override */
-		u32 wc_qos_ord;		/* read channel QoS Value Override */
-		u8 res_1108[0x110c - 0x1108];
-		u32 qos_ctrl;		/* QoS Control */
-		u32 max_ot;		/* Max OT */
-		u8 res_1114[0x1130 - 0x1114];
-		u32 target_lat;		/* Target Latency */
-		u32 latency_regu;	/* Latency Regulation */
-		u32 qos_range;		/* QoS Range */
-		u8 res_113c[0x2000 - 0x113c];
-	} slave[5];			/* Slave Interface */
-	u8 res_6000[0x9004 - 0x6000];
-	u32 cycle_counter;		/* Cycle counter */
-	u32 count_ctrl;			/* Count Control */
-	u32 overflow_status;		/* Overflow Flag Status */
-	u8 res_9010[0xa000 - 0x9010];
-	struct {
-		u32 event_select;	/* Event Select */
-		u32 event_count;	/* Event Count */
-		u32 counter_ctrl;	/* Counter Control */
-		u32 overflow_status;	/* Overflow Flag Status */
-		u8 res_a010[0xb000 - 0xa010];
-	} pcounter[4];			/* Performance Counter */
-	u8 res_e004[0x10000 - 0xe004];
-};
-
 /* MMU 500 */
 #define SMMU_SCR0			(SMMU_BASE + 0x0)
 #define SMMU_SCR1			(SMMU_BASE + 0x4)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 59410aa7e7..957e23b02a 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -107,10 +107,16 @@
 #define CONFIG_SYS_PCIE2_ADDR			(CONFIG_SYS_IMMR + 0x2500000)
 #define CONFIG_SYS_PCIE3_ADDR			(CONFIG_SYS_IMMR + 0x2600000)
 #define CONFIG_SYS_PCIE4_ADDR			(CONFIG_SYS_IMMR + 0x2700000)
+#ifdef CONFIG_ARCH_LS1088A
+#define CONFIG_SYS_PCIE1_PHYS_ADDR		0x2000000000ULL
+#define CONFIG_SYS_PCIE2_PHYS_ADDR		0x2800000000ULL
+#define CONFIG_SYS_PCIE3_PHYS_ADDR		0x3000000000ULL
+#else
 #define CONFIG_SYS_PCIE1_PHYS_ADDR		0x1000000000ULL
 #define CONFIG_SYS_PCIE2_PHYS_ADDR		0x1200000000ULL
 #define CONFIG_SYS_PCIE3_PHYS_ADDR		0x1400000000ULL
 #define CONFIG_SYS_PCIE4_PHYS_ADDR		0x1600000000ULL
+#endif
 
 /* Device Configuration */
 #define DCFG_BASE		0x01e00000
@@ -133,8 +139,19 @@
 #define SCFG_BASE		0x01fc0000
 #define SCFG_USB3PRM1CR			0x000
 #define SCFG_USB3PRM1CR_INIT		0x27672b2a
+#define SCFG_USB_TXVREFTUNE		0x9
+#define SCFG_USB_SQRXTUNE_MASK	0x7
 #define SCFG_QSPICLKCTLR	0x10
 
+#define DCSR_BASE		0x700000000ULL
+#define DCSR_USB_PHY1			0x4600000
+#define DCSR_USB_PHY2			0x4610000
+#define DCSR_USB_PHY_RX_OVRD_IN_HI	0x200C
+#define USB_PHY_RX_EQ_VAL_1		0x0000
+#define USB_PHY_RX_EQ_VAL_2		0x0080
+#define USB_PHY_RX_EQ_VAL_3		0x0380
+#define USB_PHY_RX_EQ_VAL_4		0x0b80
+
 #define TP_ITYP_AV		0x00000001	/* Initiator available */
 #define TP_ITYP_TYPE(x)	(((x) & 0x6) >> 1)	/* Initiator Type */
 #define TP_ITYP_TYPE_ARM	0x0
@@ -246,6 +263,23 @@ struct ccsr_gur {
 #define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT
 #define FSL_CHASSIS3_SRDS1_REGSR	29
 #define FSL_CHASSIS3_SRDS2_REGSR	29
+#elif defined(CONFIG_ARCH_LS1088A)
+#define FSL_CHASSIS3_EC1_REGSR  26
+#define FSL_CHASSIS3_EC2_REGSR  26
+#define FSL_CHASSIS3_RCWSR25_EC1_PRTCL_MASK     0x00000007
+#define FSL_CHASSIS3_RCWSR25_EC1_PRTCL_SHIFT    0
+#define FSL_CHASSIS3_RCWSR25_EC2_PRTCL_MASK     0x00000038
+#define FSL_CHASSIS3_RCWSR25_EC2_PRTCL_SHIFT    3
+#define	FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK	0xFFFF0000
+#define	FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT	16
+#define	FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_MASK	0x0000FFFF
+#define	FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_SHIFT	0
+#define FSL_CHASSIS3_SRDS1_PRTCL_MASK	FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS1_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS2_PRTCL_MASK	FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS1_REGSR	29
+#define FSL_CHASSIS3_SRDS2_REGSR	30
 #endif
 #define RCW_SB_EN_REG_INDEX	9
 #define RCW_SB_EN_MASK		0x00000400
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index aeb12739aa..247f09e0f5 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -29,9 +29,13 @@
 #ifdef CONFIG_SYS_FSL_CCSR_SCFG_LE
 #define scfg_in32(a)       in_le32(a)
 #define scfg_out32(a, v)   out_le32(a, v)
+#define scfg_clrbits32(addr, clear) clrbits_le32(addr, clear)
+#define scfg_clrsetbits32(addr, clear, set) clrsetbits_le32(addr, clear, set)
 #elif defined(CONFIG_SYS_FSL_CCSR_SCFG_BE)
 #define scfg_in32(a)       in_be32(a)
 #define scfg_out32(a, v)   out_be32(a, v)
+#define scfg_clrbits32(addr, clear) clrbits_be32(addr, clear)
+#define scfg_clrsetbits32(addr, clear, set) clrsetbits_be32(addr, clear, set)
 #endif
 
 #ifdef CONFIG_SYS_FSL_PEX_LUT_LE
@@ -57,6 +61,10 @@ struct cpu_type {
 #define SVR_LS1023A		0x879208
 #define SVR_LS1046A		0x870700
 #define SVR_LS1026A		0x870708
+#define SVR_LS1048A		0x870320
+#define SVR_LS1084A		0x870302
+#define SVR_LS1088A		0x870300
+#define SVR_LS1044A		0x870322
 #define SVR_LS2045A		0x870120
 #define SVR_LS2080A		0x870110
 #define SVR_LS2085A		0x870100
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
index d7d527d8f4..d1891c4bd6 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
@@ -66,12 +66,26 @@
 #define FSL_USB2_STREAM_ID		2
 #define FSL_SDMMC_STREAM_ID		3
 #define FSL_SATA1_STREAM_ID		4
+
+#if defined(CONFIG_ARCH_LS2080A)
 #define FSL_SATA2_STREAM_ID		5
+#endif
+
+#if defined(CONFIG_ARCH_LS2080A)
 #define FSL_DMA_STREAM_ID		6
+#elif defined(CONFIG_ARCH_LS1088A)
+#define FSL_DMA_STREAM_ID		5
+#endif
 
 /* PCI - programmed in PEXn_LUT */
 #define FSL_PEX_STREAM_ID_START		7
+
+#if defined(CONFIG_ARCH_LS2080A)
 #define FSL_PEX_STREAM_ID_END		22
+#elif defined(CONFIG_ARCH_LS1088A)
+#define FSL_PEX_STREAM_ID_END		18
+#endif
+
 
 /* DPAA2 - set in MC DPC and alloced by MC */
 #define FSL_DPAA2_STREAM_ID_START	23
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index fc954c5366..ff0fc47021 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -20,7 +20,6 @@
 
 #define SYS_FSL_GIC_ADDR			(CONFIG_SYS_IMMR + 0x00400000)
 #define CONFIG_SYS_FSL_DDR_ADDR			(CONFIG_SYS_IMMR + 0x00080000)
-#define CONFIG_SYS_CCI400_ADDR			(CONFIG_SYS_IMMR + 0x00180000)
 #define CONFIG_SYS_FSL_CSU_ADDR                 (CONFIG_SYS_IMMR + 0x00510000)
 #define CONFIG_SYS_IFC_ADDR			(CONFIG_SYS_IMMR + 0x00530000)
 #define CONFIG_SYS_FSL_ESDHC_ADDR		(CONFIG_SYS_IMMR + 0x00560000)
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index c34fd63e66..fe0bbb9d93 100644
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -6,6 +6,7 @@
 
 #ifndef __ASM_ARCH_LS102XA_IMMAP_H_
 #define __ASM_ARCH_LS102XA_IMMAP_H_
+#include <fsl_immap.h>
 
 #define SVR_MAJ(svr)		(((svr) >>  4) & 0xf)
 #define SVR_MIN(svr)		(((svr) >>  0) & 0xf)
@@ -173,6 +174,21 @@ struct ccsr_gur {
 #define SCFG_PMCINTECR_ETSECERRG1	0x00040000
 #define SCFG_CLUSTERPMCR_WFIL2EN	0x80000000
 
+#define SCFG_BASE			0x01570000
+#define SCFG_USB3PRM1CR			0x070
+#define SCFG_USB_TXVREFTUNE		0x9
+#define SCFG_USB_SQRXTUNE_MASK		0x7
+#define SCFG_USB3PRM2CR			0x074
+#define SCFG_USB_PCSTXSWINGFULL_MASK	0x0000FE00
+#define SCFG_USB_PCSTXSWINGFULL_VAL		0x00008E00
+
+#define USB_PHY_BASE			0x08510000
+#define USB_PHY_RX_OVRD_IN_HI	0x200c
+#define USB_PHY_RX_EQ_VAL_1		0x0000
+#define USB_PHY_RX_EQ_VAL_2		0x8000
+#define USB_PHY_RX_EQ_VAL_3		0x8004
+#define USB_PHY_RX_EQ_VAL_4		0x800C
+
 /* Supplemental Configuration Unit */
 struct ccsr_scfg {
 	u32 dpslpcr;
@@ -374,53 +390,7 @@ struct ccsr_serdes {
 	u8	res_a00[0x1000-0xa00];	/* from 0xa00 to 0xfff */
 };
 
-#define CCI400_CTRLORD_TERM_BARRIER	0x00000008
-#define CCI400_CTRLORD_EN_BARRIER	0
-#define CCI400_SHAORD_NON_SHAREABLE	0x00000002
-#define CCI400_DVM_MESSAGE_REQ_EN	0x00000002
-#define CCI400_SNOOP_REQ_EN		0x00000001
-
-/* CCI-400 registers */
-struct ccsr_cci400 {
-	u32 ctrl_ord;			/* Control Override */
-	u32 spec_ctrl;			/* Speculation Control */
-	u32 secure_access;		/* Secure Access */
-	u32 status;			/* Status */
-	u32 impr_err;			/* Imprecise Error */
-	u8 res_14[0x100 - 0x14];
-	u32 pmcr;			/* Performance Monitor Control */
-	u8 res_104[0xfd0 - 0x104];
-	u32 pid[8];			/* Peripheral ID */
-	u32 cid[4];			/* Component ID */
-	struct {
-		u32 snoop_ctrl;		/* Snoop Control */
-		u32 sha_ord;		/* Shareable Override */
-		u8 res_1008[0x1100 - 0x1008];
-		u32 rc_qos_ord;		/* read channel QoS Value Override */
-		u32 wc_qos_ord;		/* read channel QoS Value Override */
-		u8 res_1108[0x110c - 0x1108];
-		u32 qos_ctrl;		/* QoS Control */
-		u32 max_ot;		/* Max OT */
-		u8 res_1114[0x1130 - 0x1114];
-		u32 target_lat;		/* Target Latency */
-		u32 latency_regu;	/* Latency Regulation */
-		u32 qos_range;		/* QoS Range */
-		u8 res_113c[0x2000 - 0x113c];
-	} slave[5];			/* Slave Interface */
-	u8 res_6000[0x9004 - 0x6000];
-	u32 cycle_counter;		/* Cycle counter */
-	u32 count_ctrl;			/* Count Control */
-	u32 overflow_status;		/* Overflow Flag Status */
-	u8 res_9010[0xa000 - 0x9010];
-	struct {
-		u32 event_select;	/* Event Select */
-		u32 event_count;	/* Event Count */
-		u32 counter_ctrl;	/* Counter Control */
-		u32 overflow_status;	/* Overflow Flag Status */
-		u8 res_a010[0xb000 - 0xa010];
-	} pcounter[4];			/* Performance Counter */
-	u8 res_e004[0x10000 - 0xe004];
-};
+
 
 /* AHCI (sata) register map */
 struct ccsr_ahci {
diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h
index b0b3b9377e..ec6463dbb8 100644
--- a/arch/arm/include/asm/fsl_secure_boot.h
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -1,5 +1,6 @@
 /*
  * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -71,55 +72,49 @@
  * DDR memory map
  */
 #ifdef CONFIG_FSL_LSCH3
-#define CONFIG_BS_HDR_ADDR_DEVICE	0x580d00000
-#define CONFIG_BS_ADDR_DEVICE		0x580e00000
-#define CONFIG_BS_HDR_ADDR_RAM		0xa0d00000
-#define CONFIG_BS_ADDR_RAM		0xa0e00000
-#define CONFIG_BS_HDR_SIZE		0x00002000
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_BS_ADDR_DEVICE		0x20600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x20640000
+#else /* NOR BOOT */
+#define CONFIG_BS_ADDR_DEVICE		0x580600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x580640000
+#endif /*ifdef CONFIG_QSPI_BOOT */
 #define CONFIG_BS_SIZE			0x00001000
+#define CONFIG_BS_HDR_SIZE		0x00004000
+#define CONFIG_BS_ADDR_RAM		0xa0600000
+#define CONFIG_BS_HDR_ADDR_RAM		0xa0640000
 #else
 #ifdef CONFIG_SD_BOOT
 /* For SD boot address and size are assigned in terms of sector
  * offset and no. of sectors respectively.
  */
-#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
-#define CONFIG_BS_HDR_ADDR_DEVICE	0x00000920
-#else
-#define CONFIG_BS_HDR_ADDR_DEVICE       0x00000900
-#endif
-#define CONFIG_BS_ADDR_DEVICE		0x00000940
-#define CONFIG_BS_HDR_SIZE		0x00000010
+#define CONFIG_BS_ADDR_DEVICE		0x00003000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x00003200
 #define CONFIG_BS_SIZE			0x00000008
+#define CONFIG_BS_HDR_SIZE		0x00000010
 #elif defined(CONFIG_NAND_BOOT)
-#define CONFIG_BS_HDR_ADDR_DEVICE      0x00800000
-#define CONFIG_BS_ADDR_DEVICE          0x00802000
-#define CONFIG_BS_HDR_SIZE             0x00002000
-#define CONFIG_BS_SIZE                 0x00001000
-#elif defined(CONFIG_QSPI_BOOT)
-#ifdef CONFIG_ARCH_LS1046A
-#define CONFIG_BS_HDR_ADDR_DEVICE	0x40780000
-#define CONFIG_BS_ADDR_DEVICE		0x40800000
-#elif defined(CONFIG_ARCH_LS1012A)
-#define CONFIG_BS_HDR_ADDR_DEVICE      0x400c0000
-#define CONFIG_BS_ADDR_DEVICE          0x40060000
-#else
-#error "Platform not supported"
-#endif
+#define CONFIG_BS_ADDR_DEVICE		0x00600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x00640000
+#define CONFIG_BS_SIZE			0x00001000
 #define CONFIG_BS_HDR_SIZE		0x00002000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_BS_ADDR_DEVICE		0x40600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x40640000
 #define CONFIG_BS_SIZE			0x00001000
-#else /* Default NOR Boot */
-#define CONFIG_BS_HDR_ADDR_DEVICE	0x600a0000
-#define CONFIG_BS_ADDR_DEVICE		0x60060000
 #define CONFIG_BS_HDR_SIZE		0x00002000
+#else /* Default NOR Boot */
+#define CONFIG_BS_ADDR_DEVICE		0x60600000
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x60640000
 #define CONFIG_BS_SIZE			0x00001000
+#define CONFIG_BS_HDR_SIZE		0x00002000
 #endif
-#define CONFIG_BS_HDR_ADDR_RAM		0x81000000
-#define CONFIG_BS_ADDR_RAM		0x81020000
+#define CONFIG_BS_ADDR_RAM		0x81000000
+#define CONFIG_BS_HDR_ADDR_RAM		0x81020000
 #endif
 
 #ifdef CONFIG_BOOTSCRIPT_COPY_RAM
-#define CONFIG_BOOTSCRIPT_HDR_ADDR	CONFIG_BS_HDR_ADDR_RAM
 #define CONFIG_BOOTSCRIPT_ADDR		CONFIG_BS_ADDR_RAM
+#define CONFIG_BOOTSCRIPT_HDR_ADDR	CONFIG_BS_HDR_ADDR_RAM
 #else
 #define CONFIG_BOOTSCRIPT_HDR_ADDR	CONFIG_BS_HDR_ADDR_DEVICE
 /* BOOTSCRIPT_ADDR is not required */