x86: Add Advantech SOM-DB5800/SOM-6867 support

Add support for Advantech SOM-DB5800 with the SOM-6867 installed.
This is very similar to conga-qeval20-qa3-e3845 in that there is a
reference carrier board (SOM-DB5800) with a Baytrail based SoM (SOM-6867)
installed.

Currently supported:
 - 2x UART (From ITE EC on SOM-6867) routed to COM3/4 connectors on
   SOM-DB5800.
 - 4x USB 2.0 (EHCI)
 - Video
 - SATA
 - Ethernet
 - PCIe
 - Realtek ALC892 HD Audio
   Pad configuration for HDA_RSTB, HDA_SYNC, HDA_CLK, HDA_SDO
   HDA_SDI0 is set in DT to enable HD Audio codec.
   Pin defaults for codec pin complexs are not changed.

Not supported:
 - Winbond Super I/O (Must be disabled with jumpers on SOM-DB8500)
 - USB 3.0 (XHCI)
 - TPM

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

1 files changed, 24 insertions, 0 deletions

diff --git a/board/advantech/som-db5800-som-6867/som-db5800-som-6867.c b/board/advantech/som-db5800-som-6867/som-db5800-som-6867.c
new file mode 100644
index 0000000000..5bed2c1146
--- /dev/null
+++ b/board/advantech/som-db5800-som-6867/som-db5800-som-6867.c
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2016 Stefan Roese <sr@denx.de>
+ * Copyright (C) 2016 George McCollister <george.mccollister@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+
+int board_early_init_f(void)
+{
+	/*
+	 * The FSP enables the BayTrail internal legacy UART (again).
+	 * Disable it again, so that the one on the EC can be used.
+	 */
+	setup_internal_uart(0);
+
+	return 0;
+}
+
+int arch_early_init_r(void)
+{
+	return 0;
+}