Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (145 commits)
  beagleboard: enable HUB power on all variants of the BeagleBoard
  dm3730: enable dpll5
  ehci-hcd: Allow cleanups to happen gracefully on a timeout.
  OMAP3: Add DSS driver for OMAP3
  led: Remove state-saving of led for toggle functionality and add toggle option to led command
  led: Fixed setting of STATUS_LED_BIT1 when led_name is 'all'
  led: correct off/on locations in structure
  led: added cmd_led to Makefile
  BeagleBoard: fix LED 0/1 in driver
  Corrected LED name match finding avoiding extraneous Usage printouts
  BeagleBoard: config: updated default configuration
  BeagleBoard: config: Enabled multibus support for I2C in configuration
  BeagleBoard: config: add optargs/buddy/camera
  BeagleBoard: config: increase command-line functionality
  BeagleBoard: config: make mtest run
  BeagleBoard: config: enable DSS
  BeagleBoard: config: enable asix driver and dhcp
  BeagleBoard: config: enable networking
  BeagleBoard: config: decrease bootdelay to 2 seconds
  BeagleBoard: config: use uImage.beagle for tftp
  BeagleBoard: config: hardcode MAC for onboard SMSC
  BeagleBoard: config: load kernel from MMC ext, not FAT
  BeagleBoard: Configure DVI/S-video
  BeagleBoard: Added userbutton command
  BeagleBoard: turn off clocks in ehci_stop
  USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor
  beagleboard: add support for xM revision C
  beagle: pass expansionboard name in bootargs
  OMAP: Remove omapfb.debug=y from Beagle and Overo env settings
  OMAP3 Beagle Pin Mux initialization glitch fix
  da850: modifications for Logic PD Rev.3 AM18xx EVM
  da850: fix the channel number for EMAC teardown init
  da850: add support for Spectrum Digital AM18xx EVM
  da850: add support to wake up DSP during board init
  da850: modify the U-Boot prompt string
  da850: add NOR boot mode support
  da8xx: add support for multiple PLL controllers
  da850: indicate cache usage disable in config file
  dm365: modify boot prompt from dm365 to dm36x
  dm365: disable cache usage due to coherency issues
  dm6446: disable cache usage due to coherency issues
  OMAP3: Remove legacy mmc driver
  devkit8000: Use generic MMC driver
  TI OMAP3 SDP3430: Use generic MMC driver
  AM3517 CraneBoard: Use generic MMC driver
  OMAP3: pandora: Use generic MMC driver
  OMAP3: Zoom2: Use generic MMC driver
  OMAP3: Zoom1: Use generic MMC driver
  OMAP3: DIG297: Use generic MMC driver
  OMAP3: CM-T35: Use generic MMC driver
  am3517evm: Use generic MMC driver
  omap3evm: Use generic MMC driver
  omap3:clock: check cpu_family before enabling clks for IVA & CAM
  omap3:clock: configure GFX clock to 200MHz for AM/DM37x
  OMAP3/4: Increase console I/O buffer size
  PXA: vpac270: Remove re-defined CONFIG_SYS_TEXT_BASE
  PXA: Fix CSB226, fix monitor length
  PXA: Fix Lubbock, remove redundant parenthesis
  armv7: cache: remove flush on un-aligned invalidate
  armv7: stronger barrier for cache-maintenance operations
  omap: enable caches at system start-up
  arm: do not force d-cache enable on all boards
  ORIGEN: Add MMC SPL support
  ARMV7: Add support for Samsung ORIGEN board
  i2c:gpio:s5p: Enable I2C GPIO on the GONI target
  i2c:gpio:s5p: I2C GPIO Software implementation (via soft_i2c)
  Tegra2: Use clock and pinmux functions to simplify code
  Tegra2: Add additional pin multiplexing features
  Tegra2: Add more clock support
  Tegra2: Add microsecond timer function
  ARM: remove broken "at91rm9200dk" board
  ARM: remove broken "m501sk" board
  ARM: remove broken "kb9202" board
  ARM: remove broken "csb637" board
  ARM: remove broken "cmc_pu2" board
  ARM: remove broken "at91cap9adk" board
  ARM: remove broken "voiceblue" board
  ARM: remove broken "smdk2400" board
  ARM: remove broken "sbc2410x" board
  ARM: remove broken "netstar" board
  ARM: remove broken "mx1fs2" board
  ARM: remove broken "lpd7a40x" boards
  ARM: remove broken "edb93xx" boards
  ARM: remove broken "B2" board
  ARM: remove broken "armadillo" board
  ARM: remove broken "assabet" board
  ARM: versatile: drop warnings
  IMX: scb9328: drop warnings
  MX31: imx31_litekit: make use of GPIO framework
  MX31: mx31ads: make use of GPIO framework
  MX5: mx51evk: make use of GPIO framework
  MX35: mx35pdk: make use of GPIO framework
  MX5: mx53loco: make use of GPIO framework
  MX5: mx53evk: make use of GPIO framework
  MX5: vision2: make use of GPIO framework
  MX5: mx53smd: make use of GPIO framework
  MX5: mx53ard: make use of GPIO framework
  MX25: zmx25: make use of GPIO framework
  MX5: efikamx: make use of GPIO framework
  MX31: QONG: make use of GPIO framework
  MX35: make use of GPIO framework for MX35 processor
  MX5: make use of GPIO framework for MX5 processor
  MX31: make use of GPIO framework for MX31 processor
  MX25: make use of GPIO framework for MX25 processor
  IMX: uniform GPIO interface using GPIO framework
  MX: MX35 / MX5: uniform clock command with powerpc
  MX35: MX35PDK: support additional RAM on CSD1
  mx53: ddr3: Update DD3 initialization
  ARM: MX51: PLL errata workaround
  ARM: versatilepb : drop warnings due to double definitions
  omap4: increase SRAM budget to fix build error
  omap4: fix build warning due to signed unsigned comparison
  mkimage: Fix 'Unknown OMAP image type - 5'
  omap: fix gpio related build breaks
  gpio:samsung: s5p_ suffix add for GPIO functions (C210_universal)
  SMDKV310: MMC SPL: Remove unwanted dummy functions
  SMDKV310: Fix undefined reference error
  SMDKV310: Fix build error for smdkv310 board
  gpio:samsung s5p_ suffix add for GPIO functions
  mmc: S5P: Support DMA restarts at buffer boundaries
  SMDKV310: Fix host compilation of mkv310_image
  arm: fix bd pointer dereference prior initialization
  arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize
  mx5: Remove CONFIG_L2_OFF and CONFIG_SYS_L2CACHE_OFF
  MX31: removed warnings due to clock.h
  integrator: convert to new build system
  integratorcp: make the board compile
  integratorap: remove hardcoded 32MB memory cmdline
  ...

1 files changed, 0 insertions, 220 deletions

diff --git a/board/armltd/integrator/split_by_variant.sh b/board/armltd/integrator/split_by_variant.sh
deleted file mode 100755
index 19fc832c2a..0000000000
--- a/board/armltd/integrator/split_by_variant.sh
+++ /dev/null
@@ -1,220 +0,0 @@
-#!/bin/sh
-
-mkdir -p ${obj}include
-mkdir -p ${obj}board/armltd/integrator
-
-config_file=${obj}include/config.h
-
-if [ "$1" = "ap" ]
-then
-# ---------------------------------------------------------
-# Set the platform defines
-# ---------------------------------------------------------
-cat > ${config_file} << _EOF
-/* Integrator configuration implied by Makefile target */
-#define CONFIG_INTEGRATOR /* Integrator board */
-#define CONFIG_ARCH_INTEGRATOR 1 /* Integrator/AP */
-_EOF
-
-# ---------------------------------------------------------
-#	Set the core module defines according to Core Module
-# ---------------------------------------------------------
-cpu="arm_intcm"
-variant="unknown core module"
-
-if [ "$2" = "" ]
-then
-	echo "$0:: No parameters - using arm_intcm"
-else
-	case "$2" in
-	ap7_config)
-	cpu="arm_intcm"
-	variant="unported core module CM7TDMI"
-	;;
-
-	ap966)
-	cpu="arm_intcm"
-	variant="unported core module CM966E-S"
-	;;
-
-	ap922_config)
-	cpu="arm_intcm"
-	variant="unported core module CM922T"
-	;;
-
-	integratorap_config	|	\
-	ap_config)
-	cpu="arm_intcm"
-	variant="unspecified core module"
-	;;
-
-	ap720t_config)
-	cpu="arm720t"
-	echo "#define CONFIG_CM720T 1 /* CPU core is ARM720T */" \
-		>> ${config_file}
-	variant="Core module CM720T"
-	;;
-
-	ap922_XA10_config)
-	cpu="arm_intcm"
-	variant="unported core module CM922T_XA10"
-	echo "#define CONFIG_CM922T_XA10 1 /* CPU core is ARM922T_XA10 */" \
-		>> ${config_file}
-	;;
-
-	ap920t_config)
-	cpu="arm920t"
-	variant="Core module CM920T"
-	echo "#define CONFIG_CM920T 1 /* CPU core is ARM920T */" \
-		>> ${config_file}
-	;;
-
-	ap926ejs_config)
-	cpu="arm926ejs"
-	variant="Core module CM926EJ-S"
-	echo "#define CONFIG_CM926EJ_S 1 /* CPU core is ARM926EJ-S */" \
-		>> ${config_file}
-	;;
-
-	ap946es_config)
-	cpu="arm946es"
-	variant="Core module CM946E-S"
-	echo "#define CONFIG_CM946E_S 1 /* CPU core is ARM946E-S */" \
-		>> ${config_file}
-	;;
-
-	*)
-	echo "$0:: Unknown core module"
-	variant="unknown core module"
-	cpu="arm_intcm"
-	;;
-
-	esac
-fi
-
-case "$cpu" in
-	arm_intcm)
-	cat >> ${config_file} << _EOF
-/* Core module undefined/not ported */
-#define CONFIG_ARM_INTCM 1
-#undef CONFIG_CM_MULTIPLE_SSRAM /* CM may not have multiple SSRAM mapping */
-#undef CONFIG_CM_SPD_DETECT /* CM may not support SPD query */
-#undef CONFIG_CM_REMAP /* CM may not support remapping */
-#undef CONFIG_CM_INIT  /* CM may not have initialization reg */
-#undef CONFIG_CM_TCRAM /* CM may not have TCRAM */
-/* May not be processor without cache support */
-#define CONFIG_SYS_ICACHE_OFF 1
-#define CONFIG_SYS_DCACHE_OFF 1
-_EOF
-	;;
-
-	arm720t)
-	cat >> ${config_file} << _EOF
-/* May not be processor without cache support */
-#define CONFIG_SYS_ICACHE_OFF 1
-#define CONFIG_SYS_DCACHE_OFF 1
-_EOF
-	;;
-esac
-
-else
-
-# ---------------------------------------------------------
-# Set the platform defines
-# ---------------------------------------------------------
-cat >> ${config_file} << _EOF
-/* Integrator configuration implied by Makefile target */
-#define CONFIG_INTEGRATOR /* Integrator board */
-#define CONFIG_ARCH_CINTEGRATOR 1 /* Integrator/CP   */
-_EOF
-
-cpu="arm_intcm"
-variant="unknown core module"
-
-if [ "$2" = "" ]
-then
-	echo "$0:: No parameters - using arm_intcm"
-else
-	case "$2" in
-	ap966)
-	cpu="arm_intcm"
-	variant="unported core module CM966E-S"
-	;;
-
-	ap922_config)
-	cpu="arm_intcm"
-	variant="unported core module CM922T"
-	;;
-
-	integratorcp_config	|	\
-	cp_config)
-	cpu="arm_intcm"
-	variant="unspecified core module"
-	;;
-
-	cp922_XA10_config)
-	cpu="arm_intcm"
-	variant="unported core module CM922T_XA10"
-	echo "#define CONFIG_CM922T_XA10 1 /* CPU core is ARM922T_XA10 */" \
-		>> ${config_file}
-	;;
-
-	cp920t_config)
-	cpu="arm920t"
-	variant="Core module CM920T"
-	echo "#define CONFIG_CM920T 1 /* CPU core is ARM920T */" \
-		>> ${config_file}
-	;;
-
-	cp926ejs_config)
-	cpu="arm926ejs"
-	variant="Core module CM926EJ-S"
-	echo "#define CONFIG_CM926EJ_S 1 /* CPU core is ARM926EJ-S */" \
-		>> ${config_file}
-	;;
-
-
-	cp946es_config)
-	cpu="arm946es"
-	variant="Core module CM946E-S"
-	echo "#define CONFIG_CM946E_S 1 /* CPU core is ARM946E-S */" \
-		>> ${config_file}
-	;;
-
-	cp1136_config)
-	cpu="arm1136"
-	variant="Core module CM1136EJF-S"
-	echo "#define CONFIG_CM1136EJF_S 1 /* CPU core is ARM1136JF-S */" \
-		>> ${config_file}
-	;;
-
-	*)
-	echo "$0:: Unknown core module"
-	variant="unknown core module"
-	cpu="arm_intcm"
-	;;
-
-	esac
-
-fi
-
-if [ "$cpu" = "arm_intcm" ]
-then
-	cat >> ${config_file} << _EOF
-/* Core module undefined/not ported */
-#define CONFIG_ARM_INTCM 1
-#undef CONFIG_CM_MULTIPLE_SSRAM /* CM may not have multiple SSRAM mapping */
-#undef CONFIG_CM_SPD_DETECT /* CM may not support SPD query */
-#undef CONFIG_CM_REMAP /* CM may not support remapping */
-#undef CONFIG_CM_INIT /* CM may not have initialization reg */
-#undef CONFIG_CM_TCRAM /* CM may not have TCRAM */
-_EOF
-fi
-
-fi # ap
-
-# ---------------------------------------------------------
-# Complete the configuration
-# ---------------------------------------------------------
-$MKCONFIG -a -n "${2%%_config}" integrator$1 arm $cpu integrator armltd
-echo "Variant: $variant with core $cpu"