diff options
| author | Peng Fan <peng.fan@nxp.com> | 2019-03-05 02:32:49 +0000 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2019-04-25 17:03:25 +0200 |
| commit | 0d331c035a091c1c1af4180b40bd234e3b87e80a (patch) | |
| tree | 7393a4ecfbb65a2e88b8112f3a50cbe435d728e3 /board/freescale/imx8qm_mek/README | |
| parent | 894e02b7b0276af80f52d47cbc6565275262c098 (diff) | |
imx: support i.MX8QM MEK board
Add i.MX8QM MEK board support.
Included a basic dts, enabled SPL FIT
Boot log as below:
U-Boot SPL 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800)
Normal Boot
Trying to boot from MMC2_2
U-Boot 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800)
CPU: NXP i.MX8QM RevB A53 at 142933 MHz
Model: Freescale i.MX8QM MEK
Board: iMX8QM MEK
Build: SCFW 9330215b
Boot: SD1
DRAM: 6 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial@5a060000
Out: serial@5a060000
Err: serial@5a060000
Net:
Error: ethernet@5b040000 address not set.
eth-1: ethernet@5b040000
Hit any key to stop autoboot: 0
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Diffstat (limited to 'board/freescale/imx8qm_mek/README')
| -rw-r--r-- | board/freescale/imx8qm_mek/README | 57 |
1 files changed, 57 insertions, 0 deletions
diff --git a/board/freescale/imx8qm_mek/README b/board/freescale/imx8qm_mek/README new file mode 100644 index 0000000000..c3523801ae --- /dev/null +++ b/board/freescale/imx8qm_mek/README @@ -0,0 +1,57 @@ +U-Boot for the NXP i.MX8QM EVK board + +Quick Start +=========== + +- Build the ARM Trusted firmware binary +- Get scfw_tcm.bin and ahab-container.img +- Build U-Boot +- Flash the binary into the SD card +- Boot + +Get and Build the ARM Trusted firmware +====================================== + +$ git clone https://source.codeaurora.org/external/imx/imx-atf +$ cd imx-atf/ +$ git checkout origin/imx_4.14.78_1.0.0_ga -b imx_4.14.78_1.0.0_ga +$ make PLAT=imx8qm bl31 + +Get scfw_tcm.bin and ahab-container.img +============================== + +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.1.bin +$ chmod +x imx-sc-firmware-1.1.bin +$ ./imx-sc-firmware-1.1.bin +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin +$ chmod +x firmware-imx-8.0.bin +$ ./firmware-imx-8.0.bin + +Copy the following binaries to U-Boot folder: + +$ cp imx-atf/build/imx8qm/release/bl31.bin . +$ cp u-boot/u-boot.bin . + +Copy the following firmwares U-Boot folder : + +$ cp firmware-imx-7.6/firmware/seco/ahab-container.img . +$ cp imx-sc-firmware-0.7/mx8qm-mek-scfw-tcm.bin . + +Build U-Boot +============ +$ export ATF_LOAD_ADDR=0x80000000 +$ export BL33_LOAD_ADDR=0x80020000 +$ make imx8qm_mek_defconfig +$ make flash.bin +$ dd if=u-boot.itb of=flash.bin bs=512 seek=1984 + +Flash the binary into the SD card +================================= + +Burn the flash.bin binary to SD card offset 32KB: + +$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 + +Boot +==== +Set Boot switch SW2: 1100. |