Cleanup warnings for cpu/arm720t & cpu/arm1136 files.

sed the linker scripts, rather than pre-process them.
Patch by Peter Pearse, 07 Oct 2005

3 files changed, 93 insertions, 83 deletions

diff --git a/board/integratorap/lowlevel_init.S b/board/integratorap/lowlevel_init.S
index 1aacbf4a7a..ab9589c95c 100644
--- a/board/integratorap/lowlevel_init.S
+++ b/board/integratorap/lowlevel_init.S
@@ -67,17 +67,17 @@ lowlevel_init:
      !defined (CONFIG_CM940T)
 
 #ifdef	CONFIG_CM_MULTIPLE_SSRAM
-	/* set simple mapping		  */
+	/* set simple mapping			*/
 	and	r2,r2,#CMMASK_MAP_SIMPLE
-#endif /* #ifdef CONFIG_CM_MULTIPLE_SSRAM */
+#endif /* #ifdef CONFIG_CM_MULTIPLE_SSRAM	*/
 
 #ifdef	CONFIG_CM_TCRAM
-	/* disable TCRAM		  */
+	/* disable TCRAM			*/
 	and	r2,r2,#CMMASK_TCRAM_DISABLE
-#endif /* #ifdef CONFIG_CM_TCRAM	  */
+#endif /* #ifdef CONFIG_CM_TCRAM		*/
 
 #if defined (CONFIG_CM926EJ_S) || defined (CONFIG_CM1026EJ_S) || \
-	    defined (CONFIG_CM1136JF_S)
+     defined (CONFIG_CM1136JF_S)
 
 	and	r2,r2,#CMMASK_LE
 
@@ -89,7 +89,7 @@ lowlevel_init:
 
 #endif /* ARM102xxE value */
 
-	/* read CM_INIT	   */
+	/* read CM_INIT		 */
 	mov	r0, #CM_BASE
 	ldr	r1, [r0, #OS_INIT]
 	/* check against desired bit setting */
@@ -125,28 +125,28 @@ init_reg_OK:
 .globl dram_query
 dram_query:
 	stmfd	r13!,{r4-r6,lr}
-	/* set up SDRAM info				  */
+	/* set up SDRAM info					*/
 	/* - based on example code from the CM User Guide */
 	mov	r0, #CM_BASE
 
 readspdbit:
-	ldr	r1, [r0, #OS_SDRAM]	/* read the SDRAM register */
-	and	r1, r1, #0x20		/* mask SPD bit (5)	   */
-	cmp	r1, #0x20		/* test if set		   */
+	ldr	r1, [r0, #OS_SDRAM]	/* read the SDRAM register	*/
+	and	r1, r1, #0x20		/* mask SPD bit (5)		*/
+	cmp	r1, #0x20		/* test if set			*/
 	bne	readspdbit
 
 setupsdram:
-	add	r0, r0, #OS_SPD		/* address the copy of the SDP data */
-	ldrb	r1, [r0, #3]		/* number of row address lines	    */
-	ldrb	r2, [r0, #4]		/* number of column address lines   */
-	ldrb	r3, [r0, #5]		/* number of banks		    */
-	ldrb	r4, [r0, #31]		/* module bank density		    */
-	mul	r5, r4, r3		/* size of SDRAM (MB divided by 4)  */
-	mov	r5, r5, ASL#2		/* size in MB			    */
-	mov	r0, #CM_BASE		/* reload for later code	    */
-	cmp	r5, #0x10		/* is it 16MB?			    */
+	add	r0, r0, #OS_SPD		/* address the copy of the SDP data	*/
+	ldrb	r1, [r0, #3]		/* number of row address lines		*/
+	ldrb	r2, [r0, #4]		/* number of column address lines	*/
+	ldrb	r3, [r0, #5]		/* number of banks			*/
+	ldrb	r4, [r0, #31]		/* module bank density			*/
+	mul	r5, r4, r3		/* size of SDRAM (MB divided by 4)	*/
+	mov	r5, r5, ASL#2		/* size in MB				*/
+	mov	r0, #CM_BASE		/* reload for later code		*/
+	cmp	r5, #0x10		/* is it 16MB?				*/
 	bne	not16
-	mov	r6, #0x2		/* store size and CAS latency of 2  */
+	mov	r6, #0x2		/* store size and CAS latency of 2	*/
 	b	writesize
 
 not16:
@@ -197,17 +197,17 @@ cm_remap:
 	orr	r1, r1, #CMMASK_REMAP	/* set remap and led bits */
 	str	r1, [r0, #OS_CTRL]
 
-	/* Now 0x00000000 is writeable, replace the vectors  */
-	ldr	r0, =_start	/* r0 <- start of vectors	    */
-	ldr	r2, =_armboot_start	/* r2 <- past vectors		    */
-	sub	r1,r1,r1		/* destination 0x00000000	    */
+	/* Now 0x00000000 is writeable, replace the vectors	*/
+	ldr	r0, =_start	/* r0 <- start of vectors	*/
+	ldr	r2, =_armboot_start	/* r2 <- past vectors	*/
+	sub	r1,r1,r1		/* destination 0x00000000	*/
 
 copy_vec:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
+	ldmia	r0!, {r3-r10}		/* copy from source address [r0]	*/
+	stmia	r1!, {r3-r10}		/* copy to	 target address [r1]	*/
+	cmp	r0, r2			/* until source end address [r2]	*/
 	ble	copy_vec
 
-	ldmfd	r13!,{r4-r10,pc}	/* back to caller		    */
+	ldmfd	r13!,{r4-r10,pc}	/* back to caller			*/
 
 #endif /* #ifdef CONFIG_CM_REMAP */
diff --git a/board/integratorap/split_by_variant.sh b/board/integratorap/split_by_variant.sh
index 1c5f0974ed..9f71babf35 100755
--- a/board/integratorap/split_by_variant.sh
+++ b/board/integratorap/split_by_variant.sh
@@ -2,105 +2,115 @@
 # ---------------------------------------------------------
 # Set the platform defines
 # ---------------------------------------------------------
-echo -n "/* Integrator configuration implied "   > tmp.fil
-echo    " by Makefile target */"   		>> tmp.fil
-echo -n "#define CONFIG_INTEGRATOR"  		>> tmp.fil
-echo	 " /* Integrator board */"  		>> tmp.fil
-echo -n "#define CONFIG_ARCH_INTEGRATOR"	>> tmp.fil
-echo     " 1 /* Integrator/AP   */"  		>> tmp.fil
+echo -n	"/* Integrator configuration implied "	 > tmp.fil
+echo	" by Makefile target */"	 	>> tmp.fil
+echo -n	"#define CONFIG_INTEGRATOR"		>> tmp.fil
+echo	" /* Integrator board */"		>> tmp.fil
+echo -n	"#define CONFIG_ARCH_INTEGRATOR"	>> tmp.fil
+echo	" 1 /* Integrator/AP	 */"		>> tmp.fil
 # ---------------------------------------------------------
-#  Set the core module defines according to Core Module
+#	Set the core module defines according to Core Module
 # ---------------------------------------------------------
-CC=${CROSS_COMPILE}gcc
 cpu="arm_intcm"
-
-if [ "$2" == "" ]
-then
-	echo "$0:: No preprocessor parameter - using ${CROSS_COMPILE}gcc"
-else
-	CC=$2
-fi
-
+variant="unknown core module"
 
 if [ "$1" == "" ]
 then
-	echo "$0:: No parameters - using ${CROSS_COMPILE}gcc arm_intcm"
+	echo "$0:: No parameters - using arm_intcm"
 else
 	case "$1" in
-	ap7_config		|	\
-	ap966_config		|	\
-	ap922_config		|	\
+	ap7_config)
+	cpu="arm_intcm"
+	variant="unported core module CM7TDMI"
+	;;
+
+	ap966)
+	cpu="arm_intcm"
+	variant="unported core module CM966E-S"
+	;;
+
+	ap922_config)
+	cpu="arm_intcm"
+	variant="unported core module CM922T"
+	;;
+
 	integratorap_config	|	\
 	ap_config)
 	cpu="arm_intcm"
+	variant="unspecified core module"
 	;;
 
 	ap720t_config)
 	cpu="arm720t"
-	echo -n "#define CONFIG_CM720T"		>> tmp.fil
-	echo    " 1 /* CPU core is ARM720T */ "	>> tmp.fil
+	echo -n	"#define CONFIG_CM720T"		>> tmp.fil
+	echo	" 1 /* CPU core is ARM720T */ "	>> tmp.fil
+	variant="Core module CM720T"
 	;;
 
 	ap922_XA10_config)
-	echo -n "#define CONFIG_CM922T_XA10" 		>> tmp.fil
-	echo    " 1 /* CPU core is ARM922T_XA10 */" 	>> tmp.fil
 	cpu="arm_intcm"
+	variant="unported core module CM922T_XA10"
+	echo -n	"#define CONFIG_CM922T_XA10" 		>> tmp.fil
+	echo	" 1 /* CPU core is ARM922T_XA10 */" 	>> tmp.fil
 	;;
 
 	ap920t_config)
 	cpu="arm920t"
-	echo -n "#define CONFIG_CM920T" 		>> tmp.fil
-	echo    " 1 /* CPU core is ARM920T */"		>> tmp.fil
+	variant="Core module CM920T"
+	echo -n	"#define CONFIG_CM920T" 		>> tmp.fil
+	echo	" 1 /* CPU core is ARM920T */"		>> tmp.fil
 	;;
 
 	ap926ejs_config)
 	cpu="arm926ejs"
-	echo -n "#define CONFIG_CM926EJ_S"		>> tmp.fil
-	echo    " 1 /* CPU core is ARM926EJ-S */ "	>> tmp.fil
+	variant="Core module CM926EJ-S"
+	echo -n	"#define CONFIG_CM926EJ_S"		>> tmp.fil
+	echo	" 1 /* CPU core is ARM926EJ-S */ "	>> tmp.fil
 	;;
 
-
 	ap946es_config)
 	cpu="arm946es"
-	echo -n "#define CONFIG_CM946E_S"		>> tmp.fil
-	echo    " 1 /* CPU core is ARM946E-S */ "	>> tmp.fil
+	variant="Core module CM946E-S"
+	echo -n	"#define CONFIG_CM946E_S"		>> tmp.fil
+	echo	" 1 /* CPU core is ARM946E-S */ "	>> tmp.fil
 	;;
 
 	*)
-	echo "$0:: Unrecognised target - using arm_intcm"
+	echo "$0:: Unknown core module"
+	variant="unknown core module"
 	cpu="arm_intcm"
 	;;
 
 	esac
-
 fi
 
 if [ "$cpu" == "arm_intcm" ]
 then
 	echo "/* Core module undefined/not ported */"	>> tmp.fil
-	echo "#define CONFIG_ARM_INTCM 1"  		>> tmp.fil
-	echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM"	>> tmp.fil
-	echo -n "  /* CM may not have " 		>> tmp.fil
-	echo    "multiple SSRAM mapping */"  		>> tmp.fil
-	echo -n "#undef CONFIG_CM_SPD_DETECT " 		>> tmp.fil
-	echo -n " /* CM may not support SPD " 		>> tmp.fil
-	echo    "query */"    				>> tmp.fil
-	echo -n "#undef CONFIG_CM_REMAP  " 		>> tmp.fil
-	echo -n " /* CM may not support "  		>> tmp.fil
-	echo    "remapping */"   			>> tmp.fil
-	echo -n "#undef CONFIG_CM_INIT  " 		>> tmp.fil
-	echo -n " /* CM may not have  "  		>> tmp.fil
-	echo    "initialization reg */"  		>> tmp.fil
-	echo -n "#undef CONFIG_CM_TCRAM  " 		>> tmp.fil
-	echo    " /* CM may not have TCRAM */" 		>> tmp.fil
+	echo "#define CONFIG_ARM_INTCM 1"		>> tmp.fil
+	echo -n	"#undef CONFIG_CM_MULTIPLE_SSRAM"	>> tmp.fil
+	echo -n	"	/* CM may not have " 		>> tmp.fil
+	echo	"multiple SSRAM mapping */"		>> tmp.fil
+	echo -n	"#undef CONFIG_CM_SPD_DETECT " 		>> tmp.fil
+	echo -n	" /* CM may not support SPD " 		>> tmp.fil
+	echo	"query */"				>> tmp.fil
+	echo -n	"#undef CONFIG_CM_REMAP	" 		>> tmp.fil
+	echo -n	" /* CM may not support "		>> tmp.fil
+	echo	"remapping */"	 			>> tmp.fil
+	echo -n	"#undef CONFIG_CM_INIT	" 		>> tmp.fil
+	echo -n	" /* CM may not have	"		>> tmp.fil
+	echo	"initialization reg */"			>> tmp.fil
+	echo -n	"#undef CONFIG_CM_TCRAM	" 		>> tmp.fil
+	echo	" /* CM may not have TCRAM */" 		>> tmp.fil
 fi
 mv tmp.fil ./include/config.h
 # ---------------------------------------------------------
-#  Ensure correct core object loaded first in U-Boot image
+#	Ensure correct core object loaded first in U-Boot image
 # ---------------------------------------------------------
-$CC -E -P -C -D CPU_FILE=cpu/$cpu/start.o 		\
--o board/integratorap/u-boot.lds board/integratorap/u-boot.lds.S
+sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' board/integratorap/u-boot.lds.template > board/integratorap/u-boot.lds
 # ---------------------------------------------------------
 # Complete the configuration
 # ---------------------------------------------------------
 ./mkconfig -a integratorap arm $cpu integratorap;
+echo "Variant:: $variant with core $cpu"
+
diff --git a/board/integratorap/u-boot.lds.S b/board/integratorap/u-boot.lds.template
index 486b5da27b..0ec8087258 100644
--- a/board/integratorap/u-boot.lds.S
+++ b/board/integratorap/u-boot.lds.template
@@ -20,8 +20,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
-/* Preprocessed during configuration to emsure the core module processor code,
-   from CPU_FILE, is placed at the start of the image */
+# Template used during configuration to emsure the core module processor code,
+# from CPU_FILE, is placed at the start of the image */
 
 OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
 OUTPUT_ARCH(arm)
@@ -32,8 +32,8 @@ SECTIONS
 	. = ALIGN(4);
 	.text	:
 	{
-	  CPU_FILE (.text)
-	  *(.text)
+		CPU_FILE (.text)
+		*(.text)
 	}
 	.rodata : { *(.rodata) }
 	. = ALIGN(4);