diff options
Diffstat (limited to 'board/integratorap')
-rw-r--r-- | board/integratorap/lowlevel_init.S | 56 | ||||
-rwxr-xr-x | board/integratorap/split_by_variant.sh | 112 | ||||
-rw-r--r-- | board/integratorap/u-boot.lds.template (renamed from board/integratorap/u-boot.lds.S) | 8 |
3 files changed, 93 insertions, 83 deletions
diff --git a/board/integratorap/lowlevel_init.S b/board/integratorap/lowlevel_init.S index 1aacbf4a7a..ab9589c95c 100644 --- a/board/integratorap/lowlevel_init.S +++ b/board/integratorap/lowlevel_init.S @@ -67,17 +67,17 @@ lowlevel_init: !defined (CONFIG_CM940T) #ifdef CONFIG_CM_MULTIPLE_SSRAM - /* set simple mapping */ + /* set simple mapping */ and r2,r2,#CMMASK_MAP_SIMPLE -#endif /* #ifdef CONFIG_CM_MULTIPLE_SSRAM */ +#endif /* #ifdef CONFIG_CM_MULTIPLE_SSRAM */ #ifdef CONFIG_CM_TCRAM - /* disable TCRAM */ + /* disable TCRAM */ and r2,r2,#CMMASK_TCRAM_DISABLE -#endif /* #ifdef CONFIG_CM_TCRAM */ +#endif /* #ifdef CONFIG_CM_TCRAM */ #if defined (CONFIG_CM926EJ_S) || defined (CONFIG_CM1026EJ_S) || \ - defined (CONFIG_CM1136JF_S) + defined (CONFIG_CM1136JF_S) and r2,r2,#CMMASK_LE @@ -89,7 +89,7 @@ lowlevel_init: #endif /* ARM102xxE value */ - /* read CM_INIT */ + /* read CM_INIT */ mov r0, #CM_BASE ldr r1, [r0, #OS_INIT] /* check against desired bit setting */ @@ -125,28 +125,28 @@ init_reg_OK: .globl dram_query dram_query: stmfd r13!,{r4-r6,lr} - /* set up SDRAM info */ + /* set up SDRAM info */ /* - based on example code from the CM User Guide */ mov r0, #CM_BASE readspdbit: - ldr r1, [r0, #OS_SDRAM] /* read the SDRAM register */ - and r1, r1, #0x20 /* mask SPD bit (5) */ - cmp r1, #0x20 /* test if set */ + ldr r1, [r0, #OS_SDRAM] /* read the SDRAM register */ + and r1, r1, #0x20 /* mask SPD bit (5) */ + cmp r1, #0x20 /* test if set */ bne readspdbit setupsdram: - add r0, r0, #OS_SPD /* address the copy of the SDP data */ - ldrb r1, [r0, #3] /* number of row address lines */ - ldrb r2, [r0, #4] /* number of column address lines */ - ldrb r3, [r0, #5] /* number of banks */ - ldrb r4, [r0, #31] /* module bank density */ - mul r5, r4, r3 /* size of SDRAM (MB divided by 4) */ - mov r5, r5, ASL#2 /* size in MB */ - mov r0, #CM_BASE /* reload for later code */ - cmp r5, #0x10 /* is it 16MB? */ + add r0, r0, #OS_SPD /* address the copy of the SDP data */ + ldrb r1, [r0, #3] /* number of row address lines */ + ldrb r2, [r0, #4] /* number of column address lines */ + ldrb r3, [r0, #5] /* number of banks */ + ldrb r4, [r0, #31] /* module bank density */ + mul r5, r4, r3 /* size of SDRAM (MB divided by 4) */ + mov r5, r5, ASL#2 /* size in MB */ + mov r0, #CM_BASE /* reload for later code */ + cmp r5, #0x10 /* is it 16MB? */ bne not16 - mov r6, #0x2 /* store size and CAS latency of 2 */ + mov r6, #0x2 /* store size and CAS latency of 2 */ b writesize not16: @@ -197,17 +197,17 @@ cm_remap: orr r1, r1, #CMMASK_REMAP /* set remap and led bits */ str r1, [r0, #OS_CTRL] - /* Now 0x00000000 is writeable, replace the vectors */ - ldr r0, =_start /* r0 <- start of vectors */ - ldr r2, =_armboot_start /* r2 <- past vectors */ - sub r1,r1,r1 /* destination 0x00000000 */ + /* Now 0x00000000 is writeable, replace the vectors */ + ldr r0, =_start /* r0 <- start of vectors */ + ldr r2, =_armboot_start /* r2 <- past vectors */ + sub r1,r1,r1 /* destination 0x00000000 */ copy_vec: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ ble copy_vec - ldmfd r13!,{r4-r10,pc} /* back to caller */ + ldmfd r13!,{r4-r10,pc} /* back to caller */ #endif /* #ifdef CONFIG_CM_REMAP */ diff --git a/board/integratorap/split_by_variant.sh b/board/integratorap/split_by_variant.sh index 1c5f0974ed..9f71babf35 100755 --- a/board/integratorap/split_by_variant.sh +++ b/board/integratorap/split_by_variant.sh @@ -2,105 +2,115 @@ # --------------------------------------------------------- # Set the platform defines # --------------------------------------------------------- -echo -n "/* Integrator configuration implied " > tmp.fil -echo " by Makefile target */" >> tmp.fil -echo -n "#define CONFIG_INTEGRATOR" >> tmp.fil -echo " /* Integrator board */" >> tmp.fil -echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil -echo " 1 /* Integrator/AP */" >> tmp.fil +echo -n "/* Integrator configuration implied " > tmp.fil +echo " by Makefile target */" >> tmp.fil +echo -n "#define CONFIG_INTEGRATOR" >> tmp.fil +echo " /* Integrator board */" >> tmp.fil +echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil +echo " 1 /* Integrator/AP */" >> tmp.fil # --------------------------------------------------------- -# Set the core module defines according to Core Module +# Set the core module defines according to Core Module # --------------------------------------------------------- -CC=${CROSS_COMPILE}gcc cpu="arm_intcm" - -if [ "$2" == "" ] -then - echo "$0:: No preprocessor parameter - using ${CROSS_COMPILE}gcc" -else - CC=$2 -fi - +variant="unknown core module" if [ "$1" == "" ] then - echo "$0:: No parameters - using ${CROSS_COMPILE}gcc arm_intcm" + echo "$0:: No parameters - using arm_intcm" else case "$1" in - ap7_config | \ - ap966_config | \ - ap922_config | \ + ap7_config) + cpu="arm_intcm" + variant="unported core module CM7TDMI" + ;; + + ap966) + cpu="arm_intcm" + variant="unported core module CM966E-S" + ;; + + ap922_config) + cpu="arm_intcm" + variant="unported core module CM922T" + ;; + integratorap_config | \ ap_config) cpu="arm_intcm" + variant="unspecified core module" ;; ap720t_config) cpu="arm720t" - echo -n "#define CONFIG_CM720T" >> tmp.fil - echo " 1 /* CPU core is ARM720T */ " >> tmp.fil + echo -n "#define CONFIG_CM720T" >> tmp.fil + echo " 1 /* CPU core is ARM720T */ " >> tmp.fil + variant="Core module CM720T" ;; ap922_XA10_config) - echo -n "#define CONFIG_CM922T_XA10" >> tmp.fil - echo " 1 /* CPU core is ARM922T_XA10 */" >> tmp.fil cpu="arm_intcm" + variant="unported core module CM922T_XA10" + echo -n "#define CONFIG_CM922T_XA10" >> tmp.fil + echo " 1 /* CPU core is ARM922T_XA10 */" >> tmp.fil ;; ap920t_config) cpu="arm920t" - echo -n "#define CONFIG_CM920T" >> tmp.fil - echo " 1 /* CPU core is ARM920T */" >> tmp.fil + variant="Core module CM920T" + echo -n "#define CONFIG_CM920T" >> tmp.fil + echo " 1 /* CPU core is ARM920T */" >> tmp.fil ;; ap926ejs_config) cpu="arm926ejs" - echo -n "#define CONFIG_CM926EJ_S" >> tmp.fil - echo " 1 /* CPU core is ARM926EJ-S */ " >> tmp.fil + variant="Core module CM926EJ-S" + echo -n "#define CONFIG_CM926EJ_S" >> tmp.fil + echo " 1 /* CPU core is ARM926EJ-S */ " >> tmp.fil ;; - ap946es_config) cpu="arm946es" - echo -n "#define CONFIG_CM946E_S" >> tmp.fil - echo " 1 /* CPU core is ARM946E-S */ " >> tmp.fil + variant="Core module CM946E-S" + echo -n "#define CONFIG_CM946E_S" >> tmp.fil + echo " 1 /* CPU core is ARM946E-S */ " >> tmp.fil ;; *) - echo "$0:: Unrecognised target - using arm_intcm" + echo "$0:: Unknown core module" + variant="unknown core module" cpu="arm_intcm" ;; esac - fi if [ "$cpu" == "arm_intcm" ] then echo "/* Core module undefined/not ported */" >> tmp.fil - echo "#define CONFIG_ARM_INTCM 1" >> tmp.fil - echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> tmp.fil - echo -n " /* CM may not have " >> tmp.fil - echo "multiple SSRAM mapping */" >> tmp.fil - echo -n "#undef CONFIG_CM_SPD_DETECT " >> tmp.fil - echo -n " /* CM may not support SPD " >> tmp.fil - echo "query */" >> tmp.fil - echo -n "#undef CONFIG_CM_REMAP " >> tmp.fil - echo -n " /* CM may not support " >> tmp.fil - echo "remapping */" >> tmp.fil - echo -n "#undef CONFIG_CM_INIT " >> tmp.fil - echo -n " /* CM may not have " >> tmp.fil - echo "initialization reg */" >> tmp.fil - echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil - echo " /* CM may not have TCRAM */" >> tmp.fil + echo "#define CONFIG_ARM_INTCM 1" >> tmp.fil + echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> tmp.fil + echo -n " /* CM may not have " >> tmp.fil + echo "multiple SSRAM mapping */" >> tmp.fil + echo -n "#undef CONFIG_CM_SPD_DETECT " >> tmp.fil + echo -n " /* CM may not support SPD " >> tmp.fil + echo "query */" >> tmp.fil + echo -n "#undef CONFIG_CM_REMAP " >> tmp.fil + echo -n " /* CM may not support " >> tmp.fil + echo "remapping */" >> tmp.fil + echo -n "#undef CONFIG_CM_INIT " >> tmp.fil + echo -n " /* CM may not have " >> tmp.fil + echo "initialization reg */" >> tmp.fil + echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil + echo " /* CM may not have TCRAM */" >> tmp.fil fi mv tmp.fil ./include/config.h # --------------------------------------------------------- -# Ensure correct core object loaded first in U-Boot image +# Ensure correct core object loaded first in U-Boot image # --------------------------------------------------------- -$CC -E -P -C -D CPU_FILE=cpu/$cpu/start.o \ --o board/integratorap/u-boot.lds board/integratorap/u-boot.lds.S +sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' board/integratorap/u-boot.lds.template > board/integratorap/u-boot.lds # --------------------------------------------------------- # Complete the configuration # --------------------------------------------------------- ./mkconfig -a integratorap arm $cpu integratorap; +echo "Variant:: $variant with core $cpu" + diff --git a/board/integratorap/u-boot.lds.S b/board/integratorap/u-boot.lds.template index 486b5da27b..0ec8087258 100644 --- a/board/integratorap/u-boot.lds.S +++ b/board/integratorap/u-boot.lds.template @@ -20,8 +20,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ -/* Preprocessed during configuration to emsure the core module processor code, - from CPU_FILE, is placed at the start of the image */ +# Template used during configuration to emsure the core module processor code, +# from CPU_FILE, is placed at the start of the image */ OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") OUTPUT_ARCH(arm) @@ -32,8 +32,8 @@ SECTIONS . = ALIGN(4); .text : { - CPU_FILE (.text) - *(.text) + CPU_FILE (.text) + *(.text) } .rodata : { *(.rodata) } . = ALIGN(4); |