Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts:
	board/samsung/trats2/trats2.c
	include/configs/exynos5250-dt.h

Signed-off-by: Tom Rini <trini@ti.com>

1 files changed, 45 insertions, 11 deletions

diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c
index 5de8fc6cbf..77592dbba8 100644
--- a/board/siemens/rut/board.c
+++ b/board/siemens/rut/board.c
@@ -63,19 +63,14 @@ struct ddr_data rut_ddr3_data = {
 	.datawdsratio0 = 0x85,
 	.datafwsratio0 = 0x100,
 	.datawrsratio0 = 0xc1,
-	.datauserank0delay = 1,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
 };
 
 struct cmd_control rut_ddr3_cmd_ctrl_data = {
 	.cmd0csratio = 0x40,
-	.cmd0dldiff = 0,
 	.cmd0iclkout = 1,
 	.cmd1csratio = 0x40,
-	.cmd1dldiff = 0,
 	.cmd1iclkout = 1,
 	.cmd2csratio = 0x40,
-	.cmd2dldiff = 0,
 	.cmd2iclkout = 1,
 };
 
@@ -83,9 +78,48 @@ struct cmd_control rut_ddr3_cmd_ctrl_data = {
 		   &rut_ddr3_cmd_ctrl_data, &rut_ddr3_emif_reg_data, 0);
 }
 
+static int request_and_pulse_reset(int gpio, const char *name)
+{
+	int ret;
+	const int delay_us = 2000; /* 2ms */
+
+	ret = gpio_request(gpio, name);
+	if (ret < 0) {
+		printf("%s: Unable to request %s\n", __func__, name);
+		goto err;
+	}
+
+	ret = gpio_direction_output(gpio, 0);
+	if (ret < 0) {
+		printf("%s: Unable to set %s  as output\n", __func__, name);
+		goto err_free_gpio;
+	}
+
+	udelay(delay_us);
+
+	gpio_set_value(gpio, 1);
+
+	return 0;
+
+err_free_gpio:
+	gpio_free(gpio);
+err:
+	return ret;
+}
+
+#define GPIO_TO_PIN(bank, gpio)		(32 * (bank) + (gpio))
+#define ETH_PHY_RESET_GPIO		GPIO_TO_PIN(2, 18)
+#define MAXTOUCH_RESET_GPIO		GPIO_TO_PIN(3, 18)
+#define DISPLAY_RESET_GPIO		GPIO_TO_PIN(3, 19)
+
+#define REQUEST_AND_PULSE_RESET(N) \
+		request_and_pulse_reset(N, #N);
+
 static void spl_siemens_board_init(void)
 {
-	return;
+	REQUEST_AND_PULSE_RESET(ETH_PHY_RESET_GPIO);
+	REQUEST_AND_PULSE_RESET(MAXTOUCH_RESET_GPIO);
+	REQUEST_AND_PULSE_RESET(DISPLAY_RESET_GPIO);
 }
 #endif /* if def CONFIG_SPL_BUILD */
 
@@ -336,7 +370,6 @@ int clk_get(int clk)
 static int conf_disp_pll(int m, int n)
 {
 	struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
-	struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL;
 	struct dpll_params dpll_lcd = {m, n, -1, -1, -1, -1, -1};
 #if defined(DISPL_PLL_SPREAD_SPECTRUM)
 	struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
@@ -353,8 +386,6 @@ static int conf_disp_pll(int m, int n)
 		0
 	};
 	do_enable_clocks(clk_domains, clk_modules_explicit_en, 1);
-	/* 0x44e0_0500 write lcdc pixel clock mux Linux hat hier 0 */
-	writel(0x0, &cmdpll->clklcdcpixelclk);
 
 	do_setup_dpll(&dpll_lcd_regs, &dpll_lcd);
 
@@ -380,10 +411,13 @@ static int enable_lcd(void)
 {
 	unsigned char buf[1];
 
+	set_gpio(BOARD_LCD_RESET, 0);
+	mdelay(1);
 	set_gpio(BOARD_LCD_RESET, 1);
+	mdelay(1);
 
 	/* spi lcd init */
-	kwh043st20_f01_spi_startup(1, 0, 5000000, SPI_MODE_3);
+	kwh043st20_f01_spi_startup(1, 0, 5000000, SPI_MODE_0);
 
 	/* backlight on */
 	buf[0] = 0xf;
@@ -418,7 +452,7 @@ static int board_video_init(void)
 		printf("%s: %s not found, using default %s\n", __func__,
 		       factory_dat.disp_name, lcd_panels[i].name);
 	}
-	conf_disp_pll(25, 2);
+	conf_disp_pll(24, 1);
 	da8xx_video_init(&lcd_panels[display], &lcd_cfgs[display],
 			 lcd_cfgs[display].bpp);