Merge branch 'master' of /home/stefan/git/u-boot/u-boot

11 files changed, 132 insertions, 377 deletions

diff --git a/board/ads5121/Makefile b/board/ads5121/Makefile
index 5b956823ff..52d0d3c58c 100644
--- a/board/ads5121/Makefile
+++ b/board/ads5121/Makefile
@@ -27,7 +27,7 @@ $(shell mkdir -p $(OBJTREE)/board/freescale/common)
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS-y	:= $(BOARD).o iopin.o
+COBJS-y	:= $(BOARD).o
 COBJS-${CONFIG_FSL_DIU_FB} += ads5121_diu.o
 COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_diu_fb.o
 COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_logo_bmp.o
diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c
index 8452054e68..ba3d7d2a0d 100644
--- a/board/ads5121/ads5121.c
+++ b/board/ads5121/ads5121.c
@@ -23,14 +23,12 @@
 
 #include <common.h>
 #include <mpc512x.h>
-#include "iopin.h"
 #include <asm/bitops.h>
 #include <command.h>
 #include <fdt_support.h>
 #ifdef CONFIG_MISC_INIT_R
 #include <i2c.h>
 #endif
-#include "iopin.h"	/* for iopin_initialize() prototype */
 
 /* Clocks in use */
 #define SCCR1_CLOCKS_EN	(CLOCK_SCCR1_CFG_EN |				\
@@ -124,7 +122,7 @@ long int fixed_sdram (void)
 	u32 i;
 
 	/* Initialize IO Control */
-	im->io_ctrl.regs[MEM_IDX] = IOCTRL_MUX_DDR;
+	im->io_ctrl.regs[IOCTL_MEM/4] = IOCTRL_MUX_DDR;
 
 	/* Initialize DDR Local Window */
 	im->sysconf.ddrlaw.bar = CFG_DDR_BASE & 0xFFFFF000;
@@ -237,6 +235,56 @@ int misc_init_r(void)
 
 	return 0;
 }
+static  iopin_t ioregs_init[] = {
+	/* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
+	{
+		IOCTL_SPDIF_TXCLK, 3, 0,
+		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+	},
+	/* Set highest Slew on 9 PATA pins */
+	{
+		IOCTL_PATA_CE1, 9, 1,
+		IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+	},
+	/* FUNC1=FEC_COL Sets Next 15 to FEC pads */
+	{
+		IOCTL_PSC0_0, 15, 0,
+		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+	},
+	/* FUNC1=SPDIF_TXCLK */
+	{
+		IOCTL_LPC_CS1, 1, 0,
+		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+		IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+	},
+	/* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
+	{
+		IOCTL_I2C1_SCL, 2, 0,
+		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+		IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+	},
+	/* FUNC2=DIU CLK */
+	{
+		IOCTL_PSC6_0, 1, 0,
+		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+		IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+	},
+	/* FUNC2=DIU_HSYNC */
+	{
+		IOCTL_PSC6_1, 1, 0,
+		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+	},
+	/* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
+	{
+		IOCTL_PSC6_4, 26, 0,
+		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+	}
+};
 
 int checkboard (void)
 {
@@ -246,7 +294,9 @@ int checkboard (void)
 	printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n",
 		brd_rev, cpld_rev);
 	/* initialize function mux & slew rate IO inter alia on IO Pins  */
-	iopin_initialize();
+
+
+	iopin_initialize(ioregs_init, sizeof(ioregs_init) / sizeof(ioregs_init[0]));
 
 	return 0;
 }
diff --git a/board/ads5121/iopin.c b/board/ads5121/iopin.c
deleted file mode 100644
index a6792a0e27..0000000000
--- a/board/ads5121/iopin.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * (C) Copyright 2008
- * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
- * mpc512x I/O pin/pad initialization for the ADS5121 board
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/types.h>
-#include "iopin.h"
-
-/* IO pin fields */
-#define IO_PIN_FMUX(v)	((v) << 7)	/* pin function */
-#define IO_PIN_HOLD(v)	((v) << 5)	/* hold time, pci only */
-#define IO_PIN_PUD(v)	((v) << 4)	/* if PUE, 0=pull-down, 1=pull-up */
-#define IO_PIN_PUE(v)	((v) << 3)	/* pull up/down enable */
-#define IO_PIN_ST(v)	((v) << 2)	/* schmitt trigger */
-#define IO_PIN_DS(v)	((v))		/* slew rate */
-
-static struct iopin_t {
-	int p_offset;		/* offset from IOCTL_MEM_OFFSET */
-	int nr_pins;		/* number of pins to set this way */
-	int bit_or;		/* or in the value instead of overwrite */
-	u_long val;		/* value to write or or */
-} ioregs_init[] = {
-	/* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
-	{
-		IOCTL_SPDIF_TXCLK, 3, 0,
-		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* Set highest Slew on 9 PATA pins */
-	{
-		IOCTL_PATA_CE1, 9, 1,
-		IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC1=FEC_COL Sets Next 15 to FEC pads */
-	{
-		IOCTL_PSC0_0, 15, 0,
-		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC1=SPDIF_TXCLK */
-	{
-		IOCTL_LPC_CS1, 1, 0,
-		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
-	},
-	/* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
-	{
-		IOCTL_I2C1_SCL, 2, 0,
-		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
-	},
-	/* FUNC2=DIU CLK */
-	{
-		IOCTL_PSC6_0, 1, 0,
-		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
-	},
-	/* FUNC2=DIU_HSYNC */
-	{
-		IOCTL_PSC6_1, 1, 0,
-		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
-	{
-		IOCTL_PSC6_4, 26, 0,
-		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	}
-};
-
-void iopin_initialize(void)
-{
-	short i, j, n, p;
-	u_long *reg;
-	immap_t *im = (immap_t *)CFG_IMMR;
-
-	reg = (u_long *)&(im->io_ctrl.regs[0]);
-
-	if (sizeof(ioregs_init) == 0)
-		return;
-
-	n = sizeof(ioregs_init) / sizeof(ioregs_init[0]);
-
-	for (i = 0; i < n; i++) {
-		for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
-			p < ioregs_init[i].nr_pins; p++, j++) {
-			if (ioregs_init[i].bit_or)
-				reg[j] |= ioregs_init[i].val;
-			else
-				reg[j] = ioregs_init[i].val;
-		}
-	}
-	return;
-}
diff --git a/board/ads5121/iopin.h b/board/ads5121/iopin.h
deleted file mode 100644
index 7ef8472f1d..0000000000
--- a/board/ads5121/iopin.h
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * (C) Copyright 2008
- * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
- * mpc512x I/O pin/pad initialization for the ADS5121 board
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#define IOCTL_MEM		0x000
-#define IOCTL_GP		0x004
-#define IOCTL_LPC_CLK		0x008
-#define IOCTL_LPC_OE		0x00C
-#define IOCTL_LPC_RWB		0x010
-#define IOCTL_LPC_ACK		0x014
-#define IOCTL_LPC_CS0		0x018
-#define IOCTL_NFC_CE0		0x01C
-#define IOCTL_LPC_CS1		0x020
-#define IOCTL_LPC_CS2		0x024
-#define IOCTL_LPC_AX03		0x028
-#define IOCTL_EMB_AX02		0x02C
-#define IOCTL_EMB_AX01		0x030
-#define IOCTL_EMB_AX00		0x034
-#define IOCTL_EMB_AD31		0x038
-#define IOCTL_EMB_AD30		0x03C
-#define IOCTL_EMB_AD29		0x040
-#define IOCTL_EMB_AD28		0x044
-#define IOCTL_EMB_AD27		0x048
-#define IOCTL_EMB_AD26		0x04C
-#define IOCTL_EMB_AD25		0x050
-#define IOCTL_EMB_AD24		0x054
-#define IOCTL_EMB_AD23		0x058
-#define IOCTL_EMB_AD22		0x05C
-#define IOCTL_EMB_AD21		0x060
-#define IOCTL_EMB_AD20		0x064
-#define IOCTL_EMB_AD19		0x068
-#define IOCTL_EMB_AD18		0x06C
-#define IOCTL_EMB_AD17		0x070
-#define IOCTL_EMB_AD16		0x074
-#define IOCTL_EMB_AD15		0x078
-#define IOCTL_EMB_AD14		0x07C
-#define IOCTL_EMB_AD13		0x080
-#define IOCTL_EMB_AD12		0x084
-#define IOCTL_EMB_AD11		0x088
-#define IOCTL_EMB_AD10		0x08C
-#define IOCTL_EMB_AD09		0x090
-#define IOCTL_EMB_AD08		0x094
-#define IOCTL_EMB_AD07		0x098
-#define IOCTL_EMB_AD06		0x09C
-#define IOCTL_EMB_AD05		0x0A0
-#define IOCTL_EMB_AD04		0x0A4
-#define IOCTL_EMB_AD03		0x0A8
-#define IOCTL_EMB_AD02		0x0AC
-#define IOCTL_EMB_AD01		0x0B0
-#define IOCTL_EMB_AD00		0x0B4
-#define IOCTL_PATA_CE1		0x0B8
-#define IOCTL_PATA_CE2		0x0BC
-#define IOCTL_PATA_ISOLATE	0x0C0
-#define IOCTL_PATA_IOR		0x0C4
-#define IOCTL_PATA_IOW		0x0C8
-#define IOCTL_PATA_IOCHRDY	0x0CC
-#define IOCTL_PATA_INTRQ	0x0D0
-#define IOCTL_PATA_DRQ		0x0D4
-#define IOCTL_PATA_DACK		0x0D8
-#define IOCTL_NFC_WP		0x0DC
-#define IOCTL_NFC_RB		0x0E0
-#define IOCTL_NFC_ALE		0x0E4
-#define IOCTL_NFC_CLE		0x0E8
-#define IOCTL_NFC_WE		0x0EC
-#define IOCTL_NFC_RE		0x0F0
-#define IOCTL_PCI_AD31		0x0F4
-#define IOCTL_PCI_AD30		0x0F8
-#define IOCTL_PCI_AD29		0x0FC
-#define IOCTL_PCI_AD28		0x100
-#define IOCTL_PCI_AD27		0x104
-#define IOCTL_PCI_AD26		0x108
-#define IOCTL_PCI_AD25		0x10C
-#define IOCTL_PCI_AD24		0x110
-#define IOCTL_PCI_AD23		0x114
-#define IOCTL_PCI_AD22		0x118
-#define IOCTL_PCI_AD21		0x11C
-#define IOCTL_PCI_AD20		0x120
-#define IOCTL_PCI_AD19		0x124
-#define IOCTL_PCI_AD18		0x128
-#define IOCTL_PCI_AD17		0x12C
-#define IOCTL_PCI_AD16		0x130
-#define IOCTL_PCI_AD15		0x134
-#define IOCTL_PCI_AD14		0x138
-#define IOCTL_PCI_AD13		0x13C
-#define IOCTL_PCI_AD12		0x140
-#define IOCTL_PCI_AD11		0x144
-#define IOCTL_PCI_AD10		0x148
-#define IOCTL_PCI_AD09		0x14C
-#define IOCTL_PCI_AD08		0x150
-#define IOCTL_PCI_AD07		0x154
-#define IOCTL_PCI_AD06		0x158
-#define IOCTL_PCI_AD05		0x15C
-#define IOCTL_PCI_AD04		0x160
-#define IOCTL_PCI_AD03		0x164
-#define IOCTL_PCI_AD02		0x168
-#define IOCTL_PCI_AD01		0x16C
-#define IOCTL_PCI_AD00		0x170
-#define IOCTL_PCI_CBE0		0x174
-#define IOCTL_PCI_CBE1		0x178
-#define IOCTL_PCI_CBE2		0x17C
-#define IOCTL_PCI_CBE3		0x180
-#define IOCTL_PCI_GNT2		0x184
-#define IOCTL_PCI_REQ2		0x188
-#define IOCTL_PCI_GNT1		0x18C
-#define IOCTL_PCI_REQ1		0x190
-#define IOCTL_PCI_GNT0		0x194
-#define IOCTL_PCI_REQ0		0x198
-#define IOCTL_PCI_INTA		0x19C
-#define IOCTL_PCI_CLK		0x1A0
-#define IOCTL_PCI_RST_OUT	0x1A4
-#define IOCTL_PCI_FRAME		0x1A8
-#define IOCTL_PCI_IDSEL		0x1AC
-#define IOCTL_PCI_DEVSEL	0x1B0
-#define IOCTL_PCI_IRDY		0x1B4
-#define IOCTL_PCI_TRDY		0x1B8
-#define IOCTL_PCI_STOP		0x1BC
-#define IOCTL_PCI_PAR		0x1C0
-#define IOCTL_PCI_PERR		0x1C4
-#define IOCTL_PCI_SERR		0x1C8
-#define IOCTL_SPDIF_TXCLK	0x1CC
-#define IOCTL_SPDIF_TX		0x1D0
-#define IOCTL_SPDIF_RX		0x1D4
-#define IOCTL_I2C0_SCL		0x1D8
-#define IOCTL_I2C0_SDA		0x1DC
-#define IOCTL_I2C1_SCL		0x1E0
-#define IOCTL_I2C1_SDA		0x1E4
-#define IOCTL_I2C2_SCL		0x1E8
-#define IOCTL_I2C2_SDA		0x1EC
-#define IOCTL_IRQ0		0x1F0
-#define IOCTL_IRQ1		0x1F4
-#define IOCTL_CAN1_TX		0x1F8
-#define IOCTL_CAN2_TX		0x1FC
-#define IOCTL_J1850_TX		0x200
-#define IOCTL_J1850_RX		0x204
-#define IOCTL_PSC_MCLK_IN	0x208
-#define IOCTL_PSC0_0		0x20C
-#define IOCTL_PSC0_1		0x210
-#define IOCTL_PSC0_2		0x214
-#define IOCTL_PSC0_3		0x218
-#define IOCTL_PSC0_4		0x21C
-#define IOCTL_PSC1_0		0x220
-#define IOCTL_PSC1_1		0x224
-#define IOCTL_PSC1_2		0x228
-#define IOCTL_PSC1_3		0x22C
-#define IOCTL_PSC1_4		0x230
-#define IOCTL_PSC2_0		0x234
-#define IOCTL_PSC2_1		0x238
-#define IOCTL_PSC2_2		0x23C
-#define IOCTL_PSC2_3		0x240
-#define IOCTL_PSC2_4		0x244
-#define IOCTL_PSC3_0		0x248
-#define IOCTL_PSC3_1		0x24C
-#define IOCTL_PSC3_2		0x250
-#define IOCTL_PSC3_3		0x254
-#define IOCTL_PSC3_4		0x258
-#define IOCTL_PSC4_0		0x25C
-#define IOCTL_PSC4_1		0x260
-#define IOCTL_PSC4_2		0x264
-#define IOCTL_PSC4_3		0x268
-#define IOCTL_PSC4_4		0x26C
-#define IOCTL_PSC5_0		0x270
-#define IOCTL_PSC5_1		0x274
-#define IOCTL_PSC5_2		0x278
-#define IOCTL_PSC5_3		0x27C
-#define IOCTL_PSC5_4		0x280
-#define IOCTL_PSC6_0		0x284
-#define IOCTL_PSC6_1		0x288
-#define IOCTL_PSC6_2		0x28C
-#define IOCTL_PSC6_3		0x290
-#define IOCTL_PSC6_4		0x294
-#define IOCTL_PSC7_0		0x298
-#define IOCTL_PSC7_1		0x29C
-#define IOCTL_PSC7_2		0x2A0
-#define IOCTL_PSC7_3		0x2A4
-#define IOCTL_PSC7_4		0x2A8
-#define IOCTL_PSC8_0		0x2AC
-#define IOCTL_PSC8_1		0x2B0
-#define IOCTL_PSC8_2		0x2B4
-#define IOCTL_PSC8_3		0x2B8
-#define IOCTL_PSC8_4		0x2BC
-#define IOCTL_PSC9_0		0x2C0
-#define IOCTL_PSC9_1		0x2C4
-#define IOCTL_PSC9_2		0x2C8
-#define IOCTL_PSC9_3		0x2CC
-#define IOCTL_PSC9_4		0x2D0
-#define IOCTL_PSC10_0		0x2D4
-#define IOCTL_PSC10_1		0x2D8
-#define IOCTL_PSC10_2		0x2DC
-#define IOCTL_PSC10_3		0x2E0
-#define IOCTL_PSC10_4		0x2E4
-#define IOCTL_PSC11_0		0x2E8
-#define IOCTL_PSC11_1		0x2EC
-#define IOCTL_PSC11_2		0x2F0
-#define IOCTL_PSC11_3		0x2F4
-#define IOCTL_PSC11_4		0x2F8
-#define IOCTL_HRESET		0x2FC
-#define IOCTL_SRESET		0x300
-#define IOCTL_CKSTP_OUT		0x304
-#define IOCTL_USB2_VBUS_PWR_FAULT	0x308
-#define IOCTL_USB2_VBUS_PWR_SELECT	0x30C
-#define IOCTL_USB2_PHY_DRVV_BUS		0x310
-
-extern void iopin_initialize(void);
diff --git a/board/freescale/mpc8540ads/u-boot.lds b/board/freescale/mpc8540ads/u-boot.lds
index 0e4f5a2458..515d32085f 100644
--- a/board/freescale/mpc8540ads/u-boot.lds
+++ b/board/freescale/mpc8540ads/u-boot.lds
@@ -26,6 +26,12 @@
 OUTPUT_ARCH(powerpc)
 /* Do we need any of these for elf?
    __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
 SECTIONS
 {
   /* Read-only sections, merged into text segment: */
@@ -57,7 +63,7 @@ SECTIONS
     *(.text)
     *(.fixup)
     *(.got1)
-   }
+   } :text
     _etext = .;
     PROVIDE (etext = .);
     .rodata    :
@@ -66,7 +72,7 @@ SECTIONS
     *(.rodata1)
     *(.rodata.str1.4)
     *(.eh_frame)
-  }
+  } :text
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
   .dtors     : { *(.dtors)   }
@@ -118,12 +124,12 @@ SECTIONS
   .bootpg ADDR(.text) + 0x7f000 :
   {
     cpu/mpc85xx/start.o	(.bootpg)
-  } = 0xffff
+  } :text = 0xffff
 
   .resetvec ADDR(.text) + 0x7fffc :
   {
     *(.resetvec)
-  } = 0xffff
+  } :text = 0xffff
 
   . = ADDR(.text) + 0x80000;
 
@@ -134,7 +140,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
-  }
+  } :bss
 
   . = ALIGN(4);
   _end = . ;
diff --git a/board/freescale/mpc8541cds/u-boot.lds b/board/freescale/mpc8541cds/u-boot.lds
index 1c583de83f..d728d8b73a 100644
--- a/board/freescale/mpc8541cds/u-boot.lds
+++ b/board/freescale/mpc8541cds/u-boot.lds
@@ -23,6 +23,12 @@
 OUTPUT_ARCH(powerpc)
 /* Do we need any of these for elf?
    __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
 SECTIONS
 {
   /* Read-only sections, merged into text segment: */
@@ -54,7 +60,7 @@ SECTIONS
     *(.text)
     *(.fixup)
     *(.got1)
-   }
+   } :text
     _etext = .;
     PROVIDE (etext = .);
     .rodata    :
@@ -63,7 +69,7 @@ SECTIONS
     *(.rodata1)
     *(.rodata.str1.4)
     *(.eh_frame)
-  }
+  } :text
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
   .dtors     : { *(.dtors)   }
@@ -115,12 +121,12 @@ SECTIONS
   .bootpg ADDR(.text) + 0x7f000 :
   {
     cpu/mpc85xx/start.o	(.bootpg)
-  } = 0xffff
+  } :text = 0xffff
 
   .resetvec ADDR(.text) + 0x7fffc :
   {
     *(.resetvec)
-  } = 0xffff
+  } :text = 0xffff
 
   . = ADDR(.text) + 0x80000;
 
@@ -131,7 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
-  }
+  } :bss
 
   . = ALIGN(4);
   _end = . ;
diff --git a/board/freescale/mpc8544ds/u-boot.lds b/board/freescale/mpc8544ds/u-boot.lds
index 500e6475aa..a05ece5cf7 100644
--- a/board/freescale/mpc8544ds/u-boot.lds
+++ b/board/freescale/mpc8544ds/u-boot.lds
@@ -23,6 +23,12 @@
 OUTPUT_ARCH(powerpc)
 /* Do we need any of these for elf?
    __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
 SECTIONS
 {
   /* Read-only sections, merged into text segment: */
@@ -54,7 +60,7 @@ SECTIONS
     *(.text)
     *(.fixup)
     *(.got1)
-   }
+   } :text
     _etext = .;
     PROVIDE (etext = .);
     .rodata    :
@@ -63,7 +69,7 @@ SECTIONS
     *(.rodata1)
     *(.rodata.str1.4)
     *(.eh_frame)
-  }
+  } :text
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
   .dtors     : { *(.dtors)   }
@@ -115,12 +121,12 @@ SECTIONS
   .bootpg ADDR(.text) + 0x7f000 :
   {
     cpu/mpc85xx/start.o	(.bootpg)
-  } = 0xffff
+  } :text = 0xffff
 
   .resetvec ADDR(.text) + 0x7fffc :
   {
     *(.resetvec)
-  } = 0xffff
+  } :text = 0xffff
 
   . = ADDR(.text) + 0x80000;
 
@@ -131,7 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
-  }
+  } :bss
 
   . = ALIGN(4);
   _end = . ;
diff --git a/board/freescale/mpc8548cds/u-boot.lds b/board/freescale/mpc8548cds/u-boot.lds
index 6b9339511a..d4a2f72a5d 100644
--- a/board/freescale/mpc8548cds/u-boot.lds
+++ b/board/freescale/mpc8548cds/u-boot.lds
@@ -23,6 +23,12 @@
 OUTPUT_ARCH(powerpc)
 /* Do we need any of these for elf?
    __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
 SECTIONS
 {
   /* Read-only sections, merged into text segment: */
@@ -54,7 +60,7 @@ SECTIONS
     *(.text)
     *(.fixup)
     *(.got1)
-   }
+   } :text
     _etext = .;
     PROVIDE (etext = .);
     .rodata    :
@@ -63,7 +69,7 @@ SECTIONS
     *(.rodata1)
     *(.rodata.str1.4)
     *(.eh_frame)
-  }
+  } :text
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
   .dtors     : { *(.dtors)   }
@@ -115,12 +121,12 @@ SECTIONS
   .bootpg ADDR(.text) + 0x7f000 :
   {
     cpu/mpc85xx/start.o	(.bootpg)
-  } = 0xffff
+  } :text = 0xffff
 
   .resetvec ADDR(.text) + 0x7fffc :
   {
     *(.resetvec)
-  } = 0xffff
+  } :text = 0xffff
 
   . = ADDR(.text) + 0x80000;
 
@@ -131,7 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
-  }
+  } :bss
 
   . = ALIGN(4);
   _end = . ;
diff --git a/board/freescale/mpc8555cds/u-boot.lds b/board/freescale/mpc8555cds/u-boot.lds
index a18b3a7b50..11885e8201 100644
--- a/board/freescale/mpc8555cds/u-boot.lds
+++ b/board/freescale/mpc8555cds/u-boot.lds
@@ -23,6 +23,12 @@
 OUTPUT_ARCH(powerpc)
 /* Do we need any of these for elf?
    __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
 SECTIONS
 {
   /* Read-only sections, merged into text segment: */
@@ -54,7 +60,7 @@ SECTIONS
     *(.text)
     *(.fixup)
     *(.got1)
-   }
+   } :text
     _etext = .;
     PROVIDE (etext = .);
     .rodata    :
@@ -63,7 +69,7 @@ SECTIONS
     *(.rodata1)
     *(.rodata.str1.4)
     *(.eh_frame)
-  }
+  } :text
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
   .dtors     : { *(.dtors)   }
@@ -115,12 +121,12 @@ SECTIONS
   .bootpg ADDR(.text) + 0x7f000 :
   {
     cpu/mpc85xx/start.o	(.bootpg)
-  } = 0xffff
+  } :text = 0xffff
 
   .resetvec ADDR(.text) + 0x7fffc :
   {
     *(.resetvec)
-  } = 0xffff
+  } :text = 0xffff
 
   . = ADDR(.text) + 0x80000;
 
@@ -131,7 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
-  }
+  } :bss
 
   . = ALIGN(4);
   _end = . ;
diff --git a/board/freescale/mpc8560ads/u-boot.lds b/board/freescale/mpc8560ads/u-boot.lds
index 0e4f5a2458..515d32085f 100644
--- a/board/freescale/mpc8560ads/u-boot.lds
+++ b/board/freescale/mpc8560ads/u-boot.lds
@@ -26,6 +26,12 @@
 OUTPUT_ARCH(powerpc)
 /* Do we need any of these for elf?
    __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
 SECTIONS
 {
   /* Read-only sections, merged into text segment: */
@@ -57,7 +63,7 @@ SECTIONS
     *(.text)
     *(.fixup)
     *(.got1)
-   }
+   } :text
     _etext = .;
     PROVIDE (etext = .);
     .rodata    :
@@ -66,7 +72,7 @@ SECTIONS
     *(.rodata1)
     *(.rodata.str1.4)
     *(.eh_frame)
-  }
+  } :text
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
   .dtors     : { *(.dtors)   }
@@ -118,12 +124,12 @@ SECTIONS
   .bootpg ADDR(.text) + 0x7f000 :
   {
     cpu/mpc85xx/start.o	(.bootpg)
-  } = 0xffff
+  } :text = 0xffff
 
   .resetvec ADDR(.text) + 0x7fffc :
   {
     *(.resetvec)
-  } = 0xffff
+  } :text = 0xffff
 
   . = ADDR(.text) + 0x80000;
 
@@ -134,7 +140,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
-  }
+  } :bss
 
   . = ALIGN(4);
   _end = . ;
diff --git a/board/freescale/mpc8568mds/u-boot.lds b/board/freescale/mpc8568mds/u-boot.lds
index 9d245e4ec6..ad96410b2b 100644
--- a/board/freescale/mpc8568mds/u-boot.lds
+++ b/board/freescale/mpc8568mds/u-boot.lds
@@ -23,6 +23,12 @@
 OUTPUT_ARCH(powerpc)
 /* Do we need any of these for elf?
    __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
 SECTIONS
 {
   /* Read-only sections, merged into text segment: */
@@ -54,7 +60,7 @@ SECTIONS
     *(.text)
     *(.fixup)
     *(.got1)
-   }
+   } :text
     _etext = .;
     PROVIDE (etext = .);
     .rodata    :
@@ -63,7 +69,7 @@ SECTIONS
     *(.rodata1)
     *(.rodata.str1.4)
     *(.eh_frame)
-  }
+  } :text
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
   .dtors     : { *(.dtors)   }
@@ -115,12 +121,12 @@ SECTIONS
   .bootpg ADDR(.text) + 0x7f000 :
   {
     cpu/mpc85xx/start.o	(.bootpg)
-  } = 0xffff
+  } :text = 0xffff
 
   .resetvec ADDR(.text) + 0x7fffc :
   {
     *(.resetvec)
-  } = 0xffff
+  } :text = 0xffff
 
   . = ADDR(.text) + 0x80000;
 
@@ -131,7 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
-  }
+  } :bss
 
   . = ALIGN(4);
   _end = . ;