rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

5 files changed, 236 insertions, 236 deletions

diff --git a/cpu/mcf52x2/cpu.c b/cpu/mcf52x2/cpu.c
index c25670d412..32d6c40da0 100644
--- a/cpu/mcf52x2/cpu.c
+++ b/cpu/mcf52x2/cpu.c
@@ -66,11 +66,11 @@ int checkcpu(void)
 
 	if (cpu_model)
 		printf("CPU:   Freescale ColdFire MCF%s rev. %hu, at %s MHz\n",
-		       cpu_model, prn, strmhz(buf, CFG_CLK));
+		       cpu_model, prn, strmhz(buf, CONFIG_SYS_CLK));
 	else
 		printf("CPU:   Unknown - Freescale ColdFire MCF5271 family"
 		       " (PIN: 0x%x) rev. %hu, at %s MHz\n",
-		       pin, prn, strmhz(buf, CFG_CLK));
+		       pin, prn, strmhz(buf, CONFIG_SYS_CLK));
 
 	return 0;
 }
@@ -174,7 +174,7 @@ int watchdog_init(void)
 
 	/* set timeout and enable watchdog */
 	wdt->wdog_wrrr =
-	    ((CONFIG_WATCHDOG_TIMEOUT * CFG_HZ) / (32768 * 1000)) - 1;
+	    ((CONFIG_WATCHDOG_TIMEOUT * CONFIG_SYS_HZ) / (32768 * 1000)) - 1;
 	wdt->wdog_wcr = 0;	/* reset watchdog counter */
 
 	puts("WATCHDOG:enabled\n");
@@ -202,7 +202,7 @@ int checkcpu(void)
 	char buf[32];
 
 	printf("CPU:   Freescale Coldfire MCF5275 at %s MHz\n",
-			strmhz(buf, CFG_CLK));
+			strmhz(buf, CONFIG_SYS_CLK));
 	return 0;
 };
 
@@ -236,7 +236,7 @@ int watchdog_init(void)
 
 	/* set timeout and enable watchdog */
 	wdt->wmr =
-		((CONFIG_WATCHDOG_TIMEOUT * CFG_HZ) / (32768 * 1000)) - 1;
+		((CONFIG_WATCHDOG_TIMEOUT * CONFIG_SYS_HZ) / (32768 * 1000)) - 1;
 	wdt->wsr = 0x5555; /* reset watchdog counter */
 	wdt->wsr = 0xAAAA;
 
@@ -278,7 +278,7 @@ int checkcpu(void)
 	char buf[32];
 
 	printf("CPU:   Freescale Coldfire MCF5249 at %s MHz\n",
-	       strmhz(buf, CFG_CLK));
+	       strmhz(buf, CONFIG_SYS_CLK));
 	return 0;
 }
 
@@ -300,7 +300,7 @@ int checkcpu(void)
 
 	unsigned char resetsource = mbar_readLong(SIM_RSR);
 	printf("CPU:   Freescale Coldfire MCF5253 at %s MHz\n",
-	       strmhz(buf, CFG_CLK));
+	       strmhz(buf, CONFIG_SYS_CLK));
 
 	if ((resetsource & SIM_RSR_HRST) || (resetsource & SIM_RSR_SWTR)) {
 		printf("Reset:%s%s\n",
diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c
index 68aefe9151..7bb358e63f 100644
--- a/cpu/mcf52x2/cpu_init.c
+++ b/cpu/mcf52x2/cpu_init.c
@@ -72,20 +72,20 @@ void cpu_init_f(void)
 	 *  Setup chip selects...
 	 */
 
-	mbar_writeShort(MCFSIM_CSAR1, CFG_CSAR1);
-	mbar_writeShort(MCFSIM_CSCR1, CFG_CSCR1);
-	mbar_writeLong(MCFSIM_CSMR1, CFG_CSMR1);
+	mbar_writeShort(MCFSIM_CSAR1, CONFIG_SYS_CSAR1);
+	mbar_writeShort(MCFSIM_CSCR1, CONFIG_SYS_CSCR1);
+	mbar_writeLong(MCFSIM_CSMR1, CONFIG_SYS_CSMR1);
 
-	mbar_writeShort(MCFSIM_CSAR0, CFG_CSAR0);
-	mbar_writeShort(MCFSIM_CSCR0, CFG_CSCR0);
-	mbar_writeLong(MCFSIM_CSMR0, CFG_CSMR0);
+	mbar_writeShort(MCFSIM_CSAR0, CONFIG_SYS_CSAR0);
+	mbar_writeShort(MCFSIM_CSCR0, CONFIG_SYS_CSCR0);
+	mbar_writeLong(MCFSIM_CSMR0, CONFIG_SYS_CSMR0);
 
 #ifdef CONFIG_FSL_I2C
-	CFG_I2C_PINMUX_REG = CFG_I2C_PINMUX_REG & CFG_I2C_PINMUX_CLR;
-	CFG_I2C_PINMUX_REG |= CFG_I2C_PINMUX_SET;
-#ifdef CFG_I2C2_OFFSET
-	CFG_I2C2_PINMUX_REG &= CFG_I2C2_PINMUX_CLR;
-	CFG_I2C2_PINMUX_REG |= CFG_I2C2_PINMUX_SET;
+	CONFIG_SYS_I2C_PINMUX_REG = CONFIG_SYS_I2C_PINMUX_REG & CONFIG_SYS_I2C_PINMUX_CLR;
+	CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET;
+#ifdef CONFIG_SYS_I2C2_OFFSET
+	CONFIG_SYS_I2C2_PINMUX_REG &= CONFIG_SYS_I2C2_PINMUX_CLR;
+	CONFIG_SYS_I2C2_PINMUX_REG |= CONFIG_SYS_I2C2_PINMUX_SET;
 #endif
 #endif
 
@@ -102,7 +102,7 @@ int cpu_init_r(void)
 void uart_port_conf(void)
 {
 	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
+	switch (CONFIG_SYS_UART_PORT) {
 	case 0:
 		break;
 	case 1:
@@ -138,7 +138,7 @@ int cpu_init_r(void)
 void uart_port_conf(void)
 {
 	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
+	switch (CONFIG_SYS_UART_PORT) {
 	case 0:
 		mbar_writeShort(MCF_GPIO_PAR_UART, MCF_GPIO_PAR_UART_U0TXD |
 				MCF_GPIO_PAR_UART_U0RXD);
@@ -169,59 +169,59 @@ void cpu_init_f(void)
 	 * already initialized.
 	 */
 #ifndef CONFIG_MONITOR_IS_IN_RAM
-	volatile sysctrl_t *sysctrl = (sysctrl_t *) (CFG_MBAR);
+	volatile sysctrl_t *sysctrl = (sysctrl_t *) (CONFIG_SYS_MBAR);
 	volatile gpio_t *gpio = (gpio_t *) (MMAP_GPIO);
 	volatile csctrl_t *csctrl = (csctrl_t *) (MMAP_FBCS);
 
-	sysctrl->sc_scr = CFG_SCR;
-	sysctrl->sc_spr = CFG_SPR;
+	sysctrl->sc_scr = CONFIG_SYS_SCR;
+	sysctrl->sc_spr = CONFIG_SYS_SPR;
 
 	/* Setup Ports: */
-	gpio->gpio_pacnt = CFG_PACNT;
-	gpio->gpio_paddr = CFG_PADDR;
-	gpio->gpio_padat = CFG_PADAT;
-	gpio->gpio_pbcnt = CFG_PBCNT;
-	gpio->gpio_pbddr = CFG_PBDDR;
-	gpio->gpio_pbdat = CFG_PBDAT;
-	gpio->gpio_pdcnt = CFG_PDCNT;
+	gpio->gpio_pacnt = CONFIG_SYS_PACNT;
+	gpio->gpio_paddr = CONFIG_SYS_PADDR;
+	gpio->gpio_padat = CONFIG_SYS_PADAT;
+	gpio->gpio_pbcnt = CONFIG_SYS_PBCNT;
+	gpio->gpio_pbddr = CONFIG_SYS_PBDDR;
+	gpio->gpio_pbdat = CONFIG_SYS_PBDAT;
+	gpio->gpio_pdcnt = CONFIG_SYS_PDCNT;
 
 	/* Memory Controller: */
-	csctrl->cs_br0 = CFG_BR0_PRELIM;
-	csctrl->cs_or0 = CFG_OR0_PRELIM;
+	csctrl->cs_br0 = CONFIG_SYS_BR0_PRELIM;
+	csctrl->cs_or0 = CONFIG_SYS_OR0_PRELIM;
 
-#if (defined(CFG_OR1_PRELIM) && defined(CFG_BR1_PRELIM))
-	csctrl->cs_br1 = CFG_BR1_PRELIM;
-	csctrl->cs_or1 = CFG_OR1_PRELIM;
+#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
+	csctrl->cs_br1 = CONFIG_SYS_BR1_PRELIM;
+	csctrl->cs_or1 = CONFIG_SYS_OR1_PRELIM;
 #endif
 
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
-	csctrl->cs_br2 = CFG_BR2_PRELIM;
-	csctrl->cs_or2 = CFG_OR2_PRELIM;
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
+	csctrl->cs_br2 = CONFIG_SYS_BR2_PRELIM;
+	csctrl->cs_or2 = CONFIG_SYS_OR2_PRELIM;
 #endif
 
-#if defined(CFG_OR3_PRELIM) && defined(CFG_BR3_PRELIM)
-	csctrl->cs_br3 = CFG_BR3_PRELIM;
-	csctrl->cs_or3 = CFG_OR3_PRELIM;
+#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
+	csctrl->cs_br3 = CONFIG_SYS_BR3_PRELIM;
+	csctrl->cs_or3 = CONFIG_SYS_OR3_PRELIM;
 #endif
 
-#if defined(CFG_OR4_PRELIM) && defined(CFG_BR4_PRELIM)
-	csctrl->cs_br4 = CFG_BR4_PRELIM;
-	csctrl->cs_or4 = CFG_OR4_PRELIM;
+#if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM)
+	csctrl->cs_br4 = CONFIG_SYS_BR4_PRELIM;
+	csctrl->cs_or4 = CONFIG_SYS_OR4_PRELIM;
 #endif
 
-#if defined(CFG_OR5_PRELIM) && defined(CFG_BR5_PRELIM)
-	csctrl->cs_br5 = CFG_BR5_PRELIM;
-	csctrl->cs_or5 = CFG_OR5_PRELIM;
+#if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM)
+	csctrl->cs_br5 = CONFIG_SYS_BR5_PRELIM;
+	csctrl->cs_or5 = CONFIG_SYS_OR5_PRELIM;
 #endif
 
-#if defined(CFG_OR6_PRELIM) && defined(CFG_BR6_PRELIM)
-	csctrl->cs_br6 = CFG_BR6_PRELIM;
-	csctrl->cs_or6 = CFG_OR6_PRELIM;
+#if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM)
+	csctrl->cs_br6 = CONFIG_SYS_BR6_PRELIM;
+	csctrl->cs_or6 = CONFIG_SYS_OR6_PRELIM;
 #endif
 
-#if defined(CFG_OR7_PRELIM) && defined(CFG_BR7_PRELIM)
-	csctrl->cs_br7 = CFG_BR7_PRELIM;
-	csctrl->cs_or7 = CFG_OR7_PRELIM;
+#if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM)
+	csctrl->cs_br7 = CONFIG_SYS_BR7_PRELIM;
+	csctrl->cs_or7 = CONFIG_SYS_OR7_PRELIM;
 #endif
 
 #endif				/* #ifndef CONFIG_MONITOR_IS_IN_RAM */
@@ -244,7 +244,7 @@ void uart_port_conf(void)
 	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
 	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
+	switch (CONFIG_SYS_UART_PORT) {
 	case 0:
 		gpio->gpio_pbcnt &= ~(GPIO_PBCNT_PB0MSK | GPIO_PBCNT_PB1MSK);
 		gpio->gpio_pbcnt |= (GPIO_PBCNT_URT0_TXD | GPIO_PBCNT_URT0_RXD);
@@ -282,57 +282,57 @@ void cpu_init_f(void)
 
 	/* Memory Controller: */
 	/* Flash */
-	csctrl_reg->ar0 = CFG_AR0_PRELIM;
-	csctrl_reg->cr0 = CFG_CR0_PRELIM;
-	csctrl_reg->mr0 = CFG_MR0_PRELIM;
+	csctrl_reg->ar0 = CONFIG_SYS_AR0_PRELIM;
+	csctrl_reg->cr0 = CONFIG_SYS_CR0_PRELIM;
+	csctrl_reg->mr0 = CONFIG_SYS_MR0_PRELIM;
 
-#if (defined(CFG_AR1_PRELIM) && defined(CFG_CR1_PRELIM) && defined(CFG_MR1_PRELIM))
-	csctrl_reg->ar1 = CFG_AR1_PRELIM;
-	csctrl_reg->cr1 = CFG_CR1_PRELIM;
-	csctrl_reg->mr1 = CFG_MR1_PRELIM;
+#if (defined(CONFIG_SYS_AR1_PRELIM) && defined(CONFIG_SYS_CR1_PRELIM) && defined(CONFIG_SYS_MR1_PRELIM))
+	csctrl_reg->ar1 = CONFIG_SYS_AR1_PRELIM;
+	csctrl_reg->cr1 = CONFIG_SYS_CR1_PRELIM;
+	csctrl_reg->mr1 = CONFIG_SYS_MR1_PRELIM;
 #endif
 
-#if (defined(CFG_AR2_PRELIM) && defined(CFG_CR2_PRELIM) && defined(CFG_MR2_PRELIM))
-	csctrl_reg->ar2 = CFG_AR2_PRELIM;
-	csctrl_reg->cr2 = CFG_CR2_PRELIM;
-	csctrl_reg->mr2 = CFG_MR2_PRELIM;
+#if (defined(CONFIG_SYS_AR2_PRELIM) && defined(CONFIG_SYS_CR2_PRELIM) && defined(CONFIG_SYS_MR2_PRELIM))
+	csctrl_reg->ar2 = CONFIG_SYS_AR2_PRELIM;
+	csctrl_reg->cr2 = CONFIG_SYS_CR2_PRELIM;
+	csctrl_reg->mr2 = CONFIG_SYS_MR2_PRELIM;
 #endif
 
-#if (defined(CFG_AR3_PRELIM) && defined(CFG_CR3_PRELIM) && defined(CFG_MR3_PRELIM))
-	csctrl_reg->ar3 = CFG_AR3_PRELIM;
-	csctrl_reg->cr3 = CFG_CR3_PRELIM;
-	csctrl_reg->mr3 = CFG_MR3_PRELIM;
+#if (defined(CONFIG_SYS_AR3_PRELIM) && defined(CONFIG_SYS_CR3_PRELIM) && defined(CONFIG_SYS_MR3_PRELIM))
+	csctrl_reg->ar3 = CONFIG_SYS_AR3_PRELIM;
+	csctrl_reg->cr3 = CONFIG_SYS_CR3_PRELIM;
+	csctrl_reg->mr3 = CONFIG_SYS_MR3_PRELIM;
 #endif
 
-#if (defined(CFG_AR4_PRELIM) && defined(CFG_CR4_PRELIM) && defined(CFG_MR4_PRELIM))
-	csctrl_reg->ar4 = CFG_AR4_PRELIM;
-	csctrl_reg->cr4 = CFG_CR4_PRELIM;
-	csctrl_reg->mr4 = CFG_MR4_PRELIM;
+#if (defined(CONFIG_SYS_AR4_PRELIM) && defined(CONFIG_SYS_CR4_PRELIM) && defined(CONFIG_SYS_MR4_PRELIM))
+	csctrl_reg->ar4 = CONFIG_SYS_AR4_PRELIM;
+	csctrl_reg->cr4 = CONFIG_SYS_CR4_PRELIM;
+	csctrl_reg->mr4 = CONFIG_SYS_MR4_PRELIM;
 #endif
 
-#if (defined(CFG_AR5_PRELIM) && defined(CFG_CR5_PRELIM) && defined(CFG_MR5_PRELIM))
-	csctrl_reg->ar5 = CFG_AR5_PRELIM;
-	csctrl_reg->cr5 = CFG_CR5_PRELIM;
-	csctrl_reg->mr5 = CFG_MR5_PRELIM;
+#if (defined(CONFIG_SYS_AR5_PRELIM) && defined(CONFIG_SYS_CR5_PRELIM) && defined(CONFIG_SYS_MR5_PRELIM))
+	csctrl_reg->ar5 = CONFIG_SYS_AR5_PRELIM;
+	csctrl_reg->cr5 = CONFIG_SYS_CR5_PRELIM;
+	csctrl_reg->mr5 = CONFIG_SYS_MR5_PRELIM;
 #endif
 
-#if (defined(CFG_AR6_PRELIM) && defined(CFG_CR6_PRELIM) && defined(CFG_MR6_PRELIM))
-	csctrl_reg->ar6 = CFG_AR6_PRELIM;
-	csctrl_reg->cr6 = CFG_CR6_PRELIM;
-	csctrl_reg->mr6 = CFG_MR6_PRELIM;
+#if (defined(CONFIG_SYS_AR6_PRELIM) && defined(CONFIG_SYS_CR6_PRELIM) && defined(CONFIG_SYS_MR6_PRELIM))
+	csctrl_reg->ar6 = CONFIG_SYS_AR6_PRELIM;
+	csctrl_reg->cr6 = CONFIG_SYS_CR6_PRELIM;
+	csctrl_reg->mr6 = CONFIG_SYS_MR6_PRELIM;
 #endif
 
-#if (defined(CFG_AR7_PRELIM) && defined(CFG_CR7_PRELIM) && defined(CFG_MR7_PRELIM))
-	csctrl_reg->ar7 = CFG_AR7_PRELIM;
-	csctrl_reg->cr7 = CFG_CR7_PRELIM;
-	csctrl_reg->mr7 = CFG_MR7_PRELIM;
+#if (defined(CONFIG_SYS_AR7_PRELIM) && defined(CONFIG_SYS_CR7_PRELIM) && defined(CONFIG_SYS_MR7_PRELIM))
+	csctrl_reg->ar7 = CONFIG_SYS_AR7_PRELIM;
+	csctrl_reg->cr7 = CONFIG_SYS_CR7_PRELIM;
+	csctrl_reg->mr7 = CONFIG_SYS_MR7_PRELIM;
 #endif
 
 #endif				/* #ifndef CONFIG_MONITOR_IS_IN_RAM */
 
 #ifdef CONFIG_FSL_I2C
-	CFG_I2C_PINMUX_REG &= CFG_I2C_PINMUX_CLR;
-	CFG_I2C_PINMUX_REG |= CFG_I2C_PINMUX_SET;
+	CONFIG_SYS_I2C_PINMUX_REG &= CONFIG_SYS_I2C_PINMUX_CLR;
+	CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET;
 #endif
 
 	/* enable instruction cache now */
@@ -352,7 +352,7 @@ void uart_port_conf(void)
 	volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO;
 
 	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
+	switch (CONFIG_SYS_UART_PORT) {
 	case 0:
 		gpio->par_uart |= UART0_ENABLE_MASK;
 		break;
@@ -384,155 +384,155 @@ void cpu_init_f(void)
 #ifndef CONFIG_MONITOR_IS_IN_RAM
 	/* Set speed /PLL */
 	MCFCLOCK_SYNCR =
-	    MCFCLOCK_SYNCR_MFD(CFG_MFD) | MCFCLOCK_SYNCR_RFD(CFG_RFD);
+	    MCFCLOCK_SYNCR_MFD(CONFIG_SYS_MFD) | MCFCLOCK_SYNCR_RFD(CONFIG_SYS_RFD);
 	while (!(MCFCLOCK_SYNSR & MCFCLOCK_SYNSR_LOCK)) ;
 
 	MCFGPIO_PBCDPAR = 0xc0;
 
 	/* Set up the GPIO ports */
-#ifdef CFG_PEPAR
-	MCFGPIO_PEPAR = CFG_PEPAR;
+#ifdef CONFIG_SYS_PEPAR
+	MCFGPIO_PEPAR = CONFIG_SYS_PEPAR;
 #endif
-#ifdef	CFG_PFPAR
-	MCFGPIO_PFPAR = CFG_PFPAR;
+#ifdef	CONFIG_SYS_PFPAR
+	MCFGPIO_PFPAR = CONFIG_SYS_PFPAR;
 #endif
-#ifdef CFG_PJPAR
-	MCFGPIO_PJPAR = CFG_PJPAR;
+#ifdef CONFIG_SYS_PJPAR
+	MCFGPIO_PJPAR = CONFIG_SYS_PJPAR;
 #endif
-#ifdef CFG_PSDPAR
-	MCFGPIO_PSDPAR = CFG_PSDPAR;
+#ifdef CONFIG_SYS_PSDPAR
+	MCFGPIO_PSDPAR = CONFIG_SYS_PSDPAR;
 #endif
-#ifdef CFG_PASPAR
-	MCFGPIO_PASPAR = CFG_PASPAR;
+#ifdef CONFIG_SYS_PASPAR
+	MCFGPIO_PASPAR = CONFIG_SYS_PASPAR;
 #endif
-#ifdef CFG_PEHLPAR
-	MCFGPIO_PEHLPAR = CFG_PEHLPAR;
+#ifdef CONFIG_SYS_PEHLPAR
+	MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR;
 #endif
-#ifdef CFG_PQSPAR
-	MCFGPIO_PQSPAR = CFG_PQSPAR;
+#ifdef CONFIG_SYS_PQSPAR
+	MCFGPIO_PQSPAR = CONFIG_SYS_PQSPAR;
 #endif
-#ifdef CFG_PTCPAR
-	MCFGPIO_PTCPAR = CFG_PTCPAR;
+#ifdef CONFIG_SYS_PTCPAR
+	MCFGPIO_PTCPAR = CONFIG_SYS_PTCPAR;
 #endif
-#ifdef CFG_PTDPAR
-	MCFGPIO_PTDPAR = CFG_PTDPAR;
+#ifdef CONFIG_SYS_PTDPAR
+	MCFGPIO_PTDPAR = CONFIG_SYS_PTDPAR;
 #endif
-#ifdef CFG_PUAPAR
-	MCFGPIO_PUAPAR = CFG_PUAPAR;
+#ifdef CONFIG_SYS_PUAPAR
+	MCFGPIO_PUAPAR = CONFIG_SYS_PUAPAR;
 #endif
 
-#ifdef CFG_DDRUA
-	MCFGPIO_DDRUA = CFG_DDRUA;
+#ifdef CONFIG_SYS_DDRUA
+	MCFGPIO_DDRUA = CONFIG_SYS_DDRUA;
 #endif
 
 	/* This is probably a bad place to setup chip selects, but everyone
 	   else is doing it! */
 
-#if defined(CFG_CS0_BASE) & defined(CFG_CS0_SIZE) & \
-    defined(CFG_CS0_WIDTH) & defined(CFG_CS0_WS)
+#if defined(CONFIG_SYS_CS0_BASE) & defined(CONFIG_SYS_CS0_SIZE) & \
+    defined(CONFIG_SYS_CS0_WIDTH) & defined(CONFIG_SYS_CS0_WS)
 
-	MCFCSM_CSAR0 = (CFG_CS0_BASE >> 16) & 0xFFFF;
+	MCFCSM_CSAR0 = (CONFIG_SYS_CS0_BASE >> 16) & 0xFFFF;
 
-#if (CFG_CS0_WIDTH == 8)
-#define	 CFG_CS0_PS  MCFCSM_CSCR_PS_8
-#elif (CFG_CS0_WIDTH == 16)
-#define	 CFG_CS0_PS  MCFCSM_CSCR_PS_16
-#elif (CFG_CS0_WIDTH == 32)
-#define	 CFG_CS0_PS  MCFCSM_CSCR_PS_32
+#if (CONFIG_SYS_CS0_WIDTH == 8)
+#define	 CONFIG_SYS_CS0_PS  MCFCSM_CSCR_PS_8
+#elif (CONFIG_SYS_CS0_WIDTH == 16)
+#define	 CONFIG_SYS_CS0_PS  MCFCSM_CSCR_PS_16
+#elif (CONFIG_SYS_CS0_WIDTH == 32)
+#define	 CONFIG_SYS_CS0_PS  MCFCSM_CSCR_PS_32
 #else
-#error	"CFG_CS0_WIDTH: Fault - wrong bus with for CS0"
+#error	"CONFIG_SYS_CS0_WIDTH: Fault - wrong bus with for CS0"
 #endif
-	MCFCSM_CSCR0 = MCFCSM_CSCR_WS(CFG_CS0_WS)
-	    | CFG_CS0_PS | MCFCSM_CSCR_AA;
+	MCFCSM_CSCR0 = MCFCSM_CSCR_WS(CONFIG_SYS_CS0_WS)
+	    | CONFIG_SYS_CS0_PS | MCFCSM_CSCR_AA;
 
-#if (CFG_CS0_RO != 0)
-	MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE - 1)
+#if (CONFIG_SYS_CS0_RO != 0)
+	MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS0_SIZE - 1)
 	    | MCFCSM_CSMR_WP | MCFCSM_CSMR_V;
 #else
-	MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE - 1) | MCFCSM_CSMR_V;
+	MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS0_SIZE - 1) | MCFCSM_CSMR_V;
 #endif
 #else
 #warning "Chip Select 0 are not initialized/used"
 #endif
 
-#if defined(CFG_CS1_BASE) & defined(CFG_CS1_SIZE) & \
-    defined(CFG_CS1_WIDTH) & defined(CFG_CS1_WS)
+#if defined(CONFIG_SYS_CS1_BASE) & defined(CONFIG_SYS_CS1_SIZE) & \
+    defined(CONFIG_SYS_CS1_WIDTH) & defined(CONFIG_SYS_CS1_WS)
 
-	MCFCSM_CSAR1 = (CFG_CS1_BASE >> 16) & 0xFFFF;
+	MCFCSM_CSAR1 = (CONFIG_SYS_CS1_BASE >> 16) & 0xFFFF;
 
-#if (CFG_CS1_WIDTH == 8)
-#define	 CFG_CS1_PS  MCFCSM_CSCR_PS_8
-#elif (CFG_CS1_WIDTH == 16)
-#define	 CFG_CS1_PS  MCFCSM_CSCR_PS_16
-#elif (CFG_CS1_WIDTH == 32)
-#define	 CFG_CS1_PS  MCFCSM_CSCR_PS_32
+#if (CONFIG_SYS_CS1_WIDTH == 8)
+#define	 CONFIG_SYS_CS1_PS  MCFCSM_CSCR_PS_8
+#elif (CONFIG_SYS_CS1_WIDTH == 16)
+#define	 CONFIG_SYS_CS1_PS  MCFCSM_CSCR_PS_16
+#elif (CONFIG_SYS_CS1_WIDTH == 32)
+#define	 CONFIG_SYS_CS1_PS  MCFCSM_CSCR_PS_32
 #else
-#error	"CFG_CS1_WIDTH: Fault - wrong bus with for CS1"
+#error	"CONFIG_SYS_CS1_WIDTH: Fault - wrong bus with for CS1"
 #endif
-	MCFCSM_CSCR1 = MCFCSM_CSCR_WS(CFG_CS1_WS)
-	    | CFG_CS1_PS | MCFCSM_CSCR_AA;
+	MCFCSM_CSCR1 = MCFCSM_CSCR_WS(CONFIG_SYS_CS1_WS)
+	    | CONFIG_SYS_CS1_PS | MCFCSM_CSCR_AA;
 
-#if (CFG_CS1_RO != 0)
-	MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE - 1)
+#if (CONFIG_SYS_CS1_RO != 0)
+	MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS1_SIZE - 1)
 	    | MCFCSM_CSMR_WP | MCFCSM_CSMR_V;
 #else
-	MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE - 1)
+	MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS1_SIZE - 1)
 	    | MCFCSM_CSMR_V;
 #endif
 #else
 #warning "Chip Select 1 are not initialized/used"
 #endif
 
-#if defined(CFG_CS2_BASE) & defined(CFG_CS2_SIZE) & \
-    defined(CFG_CS2_WIDTH) & defined(CFG_CS2_WS)
+#if defined(CONFIG_SYS_CS2_BASE) & defined(CONFIG_SYS_CS2_SIZE) & \
+    defined(CONFIG_SYS_CS2_WIDTH) & defined(CONFIG_SYS_CS2_WS)
 
-	MCFCSM_CSAR2 = (CFG_CS2_BASE >> 16) & 0xFFFF;
+	MCFCSM_CSAR2 = (CONFIG_SYS_CS2_BASE >> 16) & 0xFFFF;
 
-#if (CFG_CS2_WIDTH == 8)
-#define	 CFG_CS2_PS  MCFCSM_CSCR_PS_8
-#elif (CFG_CS2_WIDTH == 16)
-#define	 CFG_CS2_PS  MCFCSM_CSCR_PS_16
-#elif (CFG_CS2_WIDTH == 32)
-#define	 CFG_CS2_PS  MCFCSM_CSCR_PS_32
+#if (CONFIG_SYS_CS2_WIDTH == 8)
+#define	 CONFIG_SYS_CS2_PS  MCFCSM_CSCR_PS_8
+#elif (CONFIG_SYS_CS2_WIDTH == 16)
+#define	 CONFIG_SYS_CS2_PS  MCFCSM_CSCR_PS_16
+#elif (CONFIG_SYS_CS2_WIDTH == 32)
+#define	 CONFIG_SYS_CS2_PS  MCFCSM_CSCR_PS_32
 #else
-#error	"CFG_CS2_WIDTH: Fault - wrong bus with for CS2"
+#error	"CONFIG_SYS_CS2_WIDTH: Fault - wrong bus with for CS2"
 #endif
-	MCFCSM_CSCR2 = MCFCSM_CSCR_WS(CFG_CS2_WS)
-	    | CFG_CS2_PS | MCFCSM_CSCR_AA;
+	MCFCSM_CSCR2 = MCFCSM_CSCR_WS(CONFIG_SYS_CS2_WS)
+	    | CONFIG_SYS_CS2_PS | MCFCSM_CSCR_AA;
 
-#if (CFG_CS2_RO != 0)
-	MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE - 1)
+#if (CONFIG_SYS_CS2_RO != 0)
+	MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS2_SIZE - 1)
 	    | MCFCSM_CSMR_WP | MCFCSM_CSMR_V;
 #else
-	MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE - 1)
+	MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS2_SIZE - 1)
 	    | MCFCSM_CSMR_V;
 #endif
 #else
 #warning "Chip Select 2 are not initialized/used"
 #endif
 
-#if defined(CFG_CS3_BASE) & defined(CFG_CS3_SIZE) & \
-    defined(CFG_CS3_WIDTH) & defined(CFG_CS3_WS)
+#if defined(CONFIG_SYS_CS3_BASE) & defined(CONFIG_SYS_CS3_SIZE) & \
+    defined(CONFIG_SYS_CS3_WIDTH) & defined(CONFIG_SYS_CS3_WS)
 
-	MCFCSM_CSAR3 = (CFG_CS3_BASE >> 16) & 0xFFFF;
+	MCFCSM_CSAR3 = (CONFIG_SYS_CS3_BASE >> 16) & 0xFFFF;
 
-#if (CFG_CS3_WIDTH == 8)
-#define	 CFG_CS3_PS  MCFCSM_CSCR_PS_8
-#elif (CFG_CS3_WIDTH == 16)
-#define	 CFG_CS3_PS  MCFCSM_CSCR_PS_16
-#elif (CFG_CS3_WIDTH == 32)
-#define	 CFG_CS3_PS  MCFCSM_CSCR_PS_32
+#if (CONFIG_SYS_CS3_WIDTH == 8)
+#define	 CONFIG_SYS_CS3_PS  MCFCSM_CSCR_PS_8
+#elif (CONFIG_SYS_CS3_WIDTH == 16)
+#define	 CONFIG_SYS_CS3_PS  MCFCSM_CSCR_PS_16
+#elif (CONFIG_SYS_CS3_WIDTH == 32)
+#define	 CONFIG_SYS_CS3_PS  MCFCSM_CSCR_PS_32
 #else
-#error	"CFG_CS3_WIDTH: Fault - wrong bus with for CS1"
+#error	"CONFIG_SYS_CS3_WIDTH: Fault - wrong bus with for CS1"
 #endif
-	MCFCSM_CSCR3 = MCFCSM_CSCR_WS(CFG_CS3_WS)
-	    | CFG_CS3_PS | MCFCSM_CSCR_AA;
+	MCFCSM_CSCR3 = MCFCSM_CSCR_WS(CONFIG_SYS_CS3_WS)
+	    | CONFIG_SYS_CS3_PS | MCFCSM_CSCR_AA;
 
-#if (CFG_CS3_RO != 0)
-	MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE - 1)
+#if (CONFIG_SYS_CS3_RO != 0)
+	MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS3_SIZE - 1)
 	    | MCFCSM_CSMR_WP | MCFCSM_CSMR_V;
 #else
-	MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE - 1)
+	MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS3_SIZE - 1)
 	    | MCFCSM_CSMR_V;
 #endif
 #else
@@ -556,7 +556,7 @@ int cpu_init_r(void)
 void uart_port_conf(void)
 {
 	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
+	switch (CONFIG_SYS_UART_PORT) {
 	case 0:
 		MCFGPIO_PUAPAR &= 0xFc;
 		MCFGPIO_PUAPAR |= 0x03;
@@ -589,12 +589,12 @@ void cpu_init_f(void)
 	 *        which is their primary function.
 	 *        ~Jeremy
 	 */
-	mbar2_writeLong(MCFSIM_GPIO_FUNC, CFG_GPIO_FUNC);
-	mbar2_writeLong(MCFSIM_GPIO1_FUNC, CFG_GPIO1_FUNC);
-	mbar2_writeLong(MCFSIM_GPIO_EN, CFG_GPIO_EN);
-	mbar2_writeLong(MCFSIM_GPIO1_EN, CFG_GPIO1_EN);
-	mbar2_writeLong(MCFSIM_GPIO_OUT, CFG_GPIO_OUT);
-	mbar2_writeLong(MCFSIM_GPIO1_OUT, CFG_GPIO1_OUT);
+	mbar2_writeLong(MCFSIM_GPIO_FUNC, CONFIG_SYS_GPIO_FUNC);
+	mbar2_writeLong(MCFSIM_GPIO1_FUNC, CONFIG_SYS_GPIO1_FUNC);
+	mbar2_writeLong(MCFSIM_GPIO_EN, CONFIG_SYS_GPIO_EN);
+	mbar2_writeLong(MCFSIM_GPIO1_EN, CONFIG_SYS_GPIO1_EN);
+	mbar2_writeLong(MCFSIM_GPIO_OUT, CONFIG_SYS_GPIO_OUT);
+	mbar2_writeLong(MCFSIM_GPIO1_OUT, CONFIG_SYS_GPIO1_OUT);
 
 	/*
 	 *  dBug Compliance:
@@ -636,13 +636,13 @@ void cpu_init_f(void)
 	 *  Setup chip selects...
 	 */
 
-	mbar_writeShort(MCFSIM_CSAR1, CFG_CSAR1);
-	mbar_writeShort(MCFSIM_CSCR1, CFG_CSCR1);
-	mbar_writeLong(MCFSIM_CSMR1, CFG_CSMR1);
+	mbar_writeShort(MCFSIM_CSAR1, CONFIG_SYS_CSAR1);
+	mbar_writeShort(MCFSIM_CSCR1, CONFIG_SYS_CSCR1);
+	mbar_writeLong(MCFSIM_CSMR1, CONFIG_SYS_CSMR1);
 
-	mbar_writeShort(MCFSIM_CSAR0, CFG_CSAR0);
-	mbar_writeShort(MCFSIM_CSCR0, CFG_CSCR0);
-	mbar_writeLong(MCFSIM_CSMR0, CFG_CSMR0);
+	mbar_writeShort(MCFSIM_CSAR0, CONFIG_SYS_CSAR0);
+	mbar_writeShort(MCFSIM_CSCR0, CONFIG_SYS_CSCR0);
+	mbar_writeLong(MCFSIM_CSMR0, CONFIG_SYS_CSMR0);
 
 	/* enable instruction cache now */
 	icache_enable();
@@ -659,7 +659,7 @@ int cpu_init_r(void)
 void uart_port_conf(void)
 {
 	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
+	switch (CONFIG_SYS_UART_PORT) {
 	case 0:
 		break;
 	case 1:
diff --git a/cpu/mcf52x2/interrupts.c b/cpu/mcf52x2/interrupts.c
index b8fb7bb0ee..0181e4b416 100644
--- a/cpu/mcf52x2/interrupts.c
+++ b/cpu/mcf52x2/interrupts.c
@@ -51,10 +51,10 @@ int interrupt_init(void)
 #if defined(CONFIG_MCFTMR)
 void dtimer_intr_setup(void)
 {
-	volatile intctrl_t *intp = (intctrl_t *) (CFG_INTR_BASE);
+	volatile intctrl_t *intp = (intctrl_t *) (CONFIG_SYS_INTR_BASE);
 
 	intp->int_icr1 &= ~INT_ICR1_TMR3MASK;
-	intp->int_icr1 |= CFG_TMRINTR_PRI;
+	intp->int_icr1 |= CONFIG_SYS_TMRINTR_PRI;
 }
 #endif				/* CONFIG_MCFTMR */
 #endif				/* CONFIG_M5272 */
@@ -62,7 +62,7 @@ void dtimer_intr_setup(void)
 #if defined(CONFIG_M5282) || defined(CONFIG_M5271) || defined(CONFIG_M5275)
 int interrupt_init(void)
 {
-	volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+	volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
 
 	/* Make sure all interrupts are disabled */
 	intp->imrl0 |= 0x1;
@@ -74,11 +74,11 @@ int interrupt_init(void)
 #if defined(CONFIG_MCFTMR)
 void dtimer_intr_setup(void)
 {
-	volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+	volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
 
-	intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI;
+	intp->icr0[CONFIG_SYS_TMRINTR_NO] = CONFIG_SYS_TMRINTR_PRI;
 	intp->imrl0 &= 0xFFFFFFFE;
-	intp->imrl0 &= ~CFG_TMRINTR_MASK;
+	intp->imrl0 &= ~CONFIG_SYS_TMRINTR_MASK;
 }
 #endif				/* CONFIG_MCFTMR */
 #endif				/* CONFIG_M5282 | CONFIG_M5271 | CONFIG_M5275 */
@@ -95,7 +95,7 @@ int interrupt_init(void)
 void dtimer_intr_setup(void)
 {
 	mbar_writeLong(MCFSIM_IMR, mbar_readLong(MCFSIM_IMR) & ~0x00000400);
-	mbar_writeByte(MCFSIM_TIMER2ICR, CFG_TMRINTR_PRI);
+	mbar_writeByte(MCFSIM_TIMER2ICR, CONFIG_SYS_TMRINTR_PRI);
 }
 #endif				/* CONFIG_MCFTMR */
 #endif				/* CONFIG_M5249 || CONFIG_M5253 */
diff --git a/cpu/mcf52x2/speed.c b/cpu/mcf52x2/speed.c
index 4cb8f9300d..fe51fb4803 100644
--- a/cpu/mcf52x2/speed.c
+++ b/cpu/mcf52x2/speed.c
@@ -39,11 +39,11 @@ int get_clocks (void)
 	volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR);
 	unsigned long pllcr;
 
-#ifndef CFG_PLL_BYPASS
+#ifndef CONFIG_SYS_PLL_BYPASS
 
 #ifdef CONFIG_M5249
 	/* Setup the PLL to run at the specified speed */
-#ifdef CFG_FAST_CLK
+#ifdef CONFIG_SYS_FAST_CLK
 	pllcr = 0x925a3100;	/* ~140MHz clock (PLL bypass = 0) */
 #else
 	pllcr = 0x135a4140;	/* ~72MHz clock (PLL bypass = 0) */
@@ -51,7 +51,7 @@ int get_clocks (void)
 #endif				/* CONFIG_M5249 */
 
 #ifdef CONFIG_M5253
-	pllcr = CFG_PLLCR;
+	pllcr = CONFIG_SYS_PLLCR;
 #endif				/* CONFIG_M5253 */
 
 	cpll = cpll & 0xfffffffe;	/* Set PLL bypass mode = 0 (PSTCLK = crystal) */
@@ -60,7 +60,7 @@ int get_clocks (void)
 	pllcr ^= 0x00000001;	/* Set pll bypass to 1 */
 	mbar2_writeLong(MCFSIM_PLLCR, pllcr);	/* Start locking (pll bypass = 1) */
 	udelay(0x20);		/* Wait for a lock ... */
-#endif				/* #ifndef CFG_PLL_BYPASS */
+#endif				/* #ifndef CONFIG_SYS_PLL_BYPASS */
 
 #endif				/* CONFIG_M5249 || CONFIG_M5253 */
 
@@ -76,7 +76,7 @@ int get_clocks (void)
 		;
 #endif
 
-	gd->cpu_clk = CFG_CLK;
+	gd->cpu_clk = CONFIG_SYS_CLK;
 #if defined(CONFIG_M5249) || defined(CONFIG_M5253) || defined(CONFIG_M5275)
 	gd->bus_clk = gd->cpu_clk / 2;
 #else
@@ -85,7 +85,7 @@ int get_clocks (void)
 
 #ifdef CONFIG_FSL_I2C
 	gd->i2c1_clk = gd->bus_clk;
-#ifdef CFG_I2C2_OFFSET
+#ifdef CONFIG_SYS_I2C2_OFFSET
 	gd->i2c2_clk = gd->bus_clk;
 #endif
 #endif
diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S
index 2e8ecfbe68..da45bcbbf7 100644
--- a/cpu/mcf52x2/start.S
+++ b/cpu/mcf52x2/start.S
@@ -56,7 +56,7 @@
 _vectors:
 
 .long	0x00000000		/* Flash offset is 0 until we setup CS0 */
-#if defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE)
+#if defined(CONFIG_M5282) && (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
 .long	_start - TEXT_BASE
 #else
 .long	_START
@@ -103,9 +103,9 @@ _vectors:
 	.text
 
 
-#if defined(CFG_INT_FLASH_BASE) && \
+#if defined(CONFIG_SYS_INT_FLASH_BASE) && \
     (defined(CONFIG_M5282) || defined(CONFIG_M5281))
-	#if (TEXT_BASE == CFG_INT_FLASH_BASE)
+	#if (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
 		.long	0x55AA55AA,0xAA55AA55 /* CFM Backdoorkey */
 		.long	0xFFFFFFFF /* all sectors protected */
 		.long	0x00000000 /* supervisor/User restriction */
@@ -120,44 +120,44 @@ _start:
 	move.w #0x2700,%sr
 
 #if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5253)
-	move.l	#(CFG_MBAR + 1), %d0		/* set MBAR address + valid flag */
+	move.l	#(CONFIG_SYS_MBAR + 1), %d0		/* set MBAR address + valid flag */
 	move.c	%d0, %MBAR
 
 	/*** The 5249 has MBAR2 as well ***/
-#ifdef CFG_MBAR2
-	move.l	#(CFG_MBAR2 + 1), %d0	        /* Get MBAR2 address */
+#ifdef CONFIG_SYS_MBAR2
+	move.l	#(CONFIG_SYS_MBAR2 + 1), %d0	        /* Get MBAR2 address */
 	movec	%d0, #0xc0e		        /* Set MBAR2 */
 #endif
 
-	move.l	#(CFG_INIT_RAM_ADDR + 1), %d0
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + 1), %d0
 	movec	%d0, %RAMBAR0
 #endif /* CONFIG_M5272 || CONFIG_M5249 || CONFIG_M5253 */
 
 #if defined(CONFIG_M5282) || defined(CONFIG_M5271)
 	/* Initialize IPSBAR */
-	move.l	#(CFG_MBAR + 1), %d0		/* set IPSBAR address + valid flag */
+	move.l	#(CONFIG_SYS_MBAR + 1), %d0		/* set IPSBAR address + valid flag */
 	move.l	%d0, 0x40000000
 
 	/* Initialize RAMBAR1: locate SRAM and validate it */
-	move.l	#(CFG_INIT_RAM_ADDR + 0x21), %d0
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + 0x21), %d0
 	movec	%d0, %RAMBAR1
 
 #if defined(CONFIG_M5282)
-#if (TEXT_BASE == CFG_INT_FLASH_BASE)
+#if (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
 	/* Setup code in SRAM to initialize FLASHBAR, if start from internal Flash */
 
-	move.l #(_flashbar_setup-CFG_INT_FLASH_BASE), %a0
-	move.l #(_flashbar_setup_end-CFG_INT_FLASH_BASE), %a1
-	move.l #(CFG_INIT_RAM_ADDR), %a2
+	move.l #(_flashbar_setup-CONFIG_SYS_INT_FLASH_BASE), %a0
+	move.l #(_flashbar_setup_end-CONFIG_SYS_INT_FLASH_BASE), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR), %a2
 _copy_flash:
 	move.l (%a0)+, (%a2)+
 	cmp.l %a0, %a1
 	bgt.s _copy_flash
-	jmp CFG_INIT_RAM_ADDR
+	jmp CONFIG_SYS_INIT_RAM_ADDR
 
 _flashbar_setup:
 	/* Initialize FLASHBAR: locate internal Flash and validate it */
-	move.l	#(CFG_INT_FLASH_BASE + CFG_INT_FLASH_ENABLE), %d0
+	move.l	#(CONFIG_SYS_INT_FLASH_BASE + CONFIG_SYS_INT_FLASH_ENABLE), %d0
 	movec	%d0, %FLASHBAR
 	jmp _after_flashbar_copy.L	/* Force jump to absolute address */
 _flashbar_setup_end:
@@ -165,9 +165,9 @@ _flashbar_setup_end:
 _after_flashbar_copy:
 #else
 	/* Setup code to initialize FLASHBAR, if start from external Memory */
-	move.l	#(CFG_INT_FLASH_BASE + CFG_INT_FLASH_ENABLE), %d0
+	move.l	#(CONFIG_SYS_INT_FLASH_BASE + CONFIG_SYS_INT_FLASH_ENABLE), %d0
 	movec	%d0, %FLASHBAR
-#endif /* (TEXT_BASE == CFG_INT_FLASH_BASE) */
+#endif /* (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) */
 
 #endif
 #endif
@@ -175,22 +175,22 @@ _after_flashbar_copy:
 	 * therefore no VBR to set
 	 */
 #if !defined(CONFIG_MONITOR_IS_IN_RAM)
-#if defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE)
-	move.l	#CFG_INT_FLASH_BASE, %d0
+#if defined(CONFIG_M5282) && (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+	move.l	#CONFIG_SYS_INT_FLASH_BASE, %d0
 #else
-	move.l	#CFG_FLASH_BASE, %d0
+	move.l	#CONFIG_SYS_FLASH_BASE, %d0
 #endif
 	movec	%d0, %VBR
 #endif
 
 #ifdef CONFIG_M5275
 	/* Initialize IPSBAR */
-	move.l	#(CFG_MBAR + 1), %d0		/* set IPSBAR address + valid flag */
+	move.l	#(CONFIG_SYS_MBAR + 1), %d0		/* set IPSBAR address + valid flag */
 	move.l	%d0, 0x40000000
 /*	movec	%d0, %MBAR */
 
 	/* Initialize RAMBAR: locate SRAM and validate it */
-	move.l	#(CFG_INIT_RAM_ADDR + 0x21), %d0
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + 0x21), %d0
 	movec	%d0, %RAMBAR1
 #endif
 
@@ -204,7 +204,7 @@ _after_flashbar_copy:
 #endif
 
 	/* set stackpointer to end of internal ram to get some stackspace for the first c-code */
-	move.l	#(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
 	clr.l %sp@-
 
 	move.l #__got_start, %a5		/* put relocation table address to a5 */
@@ -235,7 +235,7 @@ relocate_code:
 	move.l 12(%a6), %d0		/* Save copy of Global Data pointer */
 	move.l 16(%a6), %a0		/* Save copy of Destination Address */
 
-	move.l #CFG_MONITOR_BASE, %a1
+	move.l #CONFIG_SYS_MONITOR_BASE, %a1
 	move.l #__init_end, %a2
 	move.l %a0, %a3
 	/* copy the code to RAM */
@@ -249,7 +249,7 @@ relocate_code:
  * initialization, now running from RAM.
  */
 	move.l	%a0, %a1
-	add.l	#(in_ram - CFG_MONITOR_BASE), %a1
+	add.l	#(in_ram - CONFIG_SYS_MONITOR_BASE), %a1
 	jmp	(%a1)
 
 in_ram:
@@ -259,9 +259,9 @@ clear_bss:
 	 * Now clear BSS segment
 	 */
 	move.l	%a0, %a1
-	add.l	#(_sbss - CFG_MONITOR_BASE),%a1
+	add.l	#(_sbss - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l	%a0, %d1
-	add.l	#(_ebss - CFG_MONITOR_BASE),%d1
+	add.l	#(_ebss - CONFIG_SYS_MONITOR_BASE),%d1
 6:
 	clr.l	(%a1)+
 	cmp.l	%a1,%d1
@@ -271,11 +271,11 @@ clear_bss:
 	 * fix got table in RAM
 	 */
 	move.l	%a0, %a1
-	add.l	#(__got_start - CFG_MONITOR_BASE),%a1
+	add.l	#(__got_start - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l	%a1,%a5		/* * fix got pointer register a5 */
 
 	move.l	%a0, %a2
-	add.l	#(__got_end - CFG_MONITOR_BASE),%a2
+	add.l	#(__got_end - CONFIG_SYS_MONITOR_BASE),%a2
 
 7:
 	move.l	(%a1),%d1
@@ -290,27 +290,27 @@ clear_bss:
 	/* quick and dirty */
 
 	move.l	%a0,%d1
-	add.l	#(icache_state - CFG_MONITOR_BASE),%d1
+	add.l	#(icache_state - CONFIG_SYS_MONITOR_BASE),%d1
 	move.l	%a0,%a1
-	add.l	#(icache_state_access_1+2 - CFG_MONITOR_BASE),%a1
+	add.l	#(icache_state_access_1+2 - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l  %d1,(%a1)
 	move.l	%a0,%a1
-	add.l	#(icache_state_access_2+2 - CFG_MONITOR_BASE),%a1
+	add.l	#(icache_state_access_2+2 - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l  %d1,(%a1)
 	move.l	%a0,%a1
-	add.l	#(icache_state_access_3+2 - CFG_MONITOR_BASE),%a1
+	add.l	#(icache_state_access_3+2 - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l  %d1,(%a1)
 #endif
 
 	/* calculate relative jump to board_init_r in ram */
 	move.l %a0, %a1
-	add.l #(board_init_r - CFG_MONITOR_BASE), %a1
+	add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
 
 	/* set parameters for board_init_r */
 	move.l %a0,-(%sp)		/* dest_addr */
 	move.l %d0,-(%sp)		/* gd */
-#if defined(DEBUG) && (TEXT_BASE != CFG_INT_FLASH_BASE) && \
-    defined(CFG_HALT_BEFOR_RAM_JUMP)
+#if defined(DEBUG) && (TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE) && \
+    defined(CONFIG_SYS_HALT_BEFOR_RAM_JUMP)
 	halt
 #endif
 	jsr	(%a1)
@@ -344,14 +344,14 @@ _int_handler:
 icache_enable:
 	move.l	#0x01000000, %d0		/* Invalidate cache cmd */
 	movec	%d0, %CACR			/* Invalidate cache */
-	move.l	#(CFG_SDRAM_BASE + 0xc000), %d0	/* Setup cache mask */
+	move.l	#(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0	/* Setup cache mask */
 	movec	%d0, %ACR0			/* Enable cache */
 
 	move.l	#0x80000200, %d0		/* Setup cache mask */
 	movec	%d0, %CACR			/* Enable cache */
 	nop
 
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
 	moveq	#1, %d0
 	move.l	%d0, (%a1)
 	rts