Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (145 commits)
  beagleboard: enable HUB power on all variants of the BeagleBoard
  dm3730: enable dpll5
  ehci-hcd: Allow cleanups to happen gracefully on a timeout.
  OMAP3: Add DSS driver for OMAP3
  led: Remove state-saving of led for toggle functionality and add toggle option to led command
  led: Fixed setting of STATUS_LED_BIT1 when led_name is 'all'
  led: correct off/on locations in structure
  led: added cmd_led to Makefile
  BeagleBoard: fix LED 0/1 in driver
  Corrected LED name match finding avoiding extraneous Usage printouts
  BeagleBoard: config: updated default configuration
  BeagleBoard: config: Enabled multibus support for I2C in configuration
  BeagleBoard: config: add optargs/buddy/camera
  BeagleBoard: config: increase command-line functionality
  BeagleBoard: config: make mtest run
  BeagleBoard: config: enable DSS
  BeagleBoard: config: enable asix driver and dhcp
  BeagleBoard: config: enable networking
  BeagleBoard: config: decrease bootdelay to 2 seconds
  BeagleBoard: config: use uImage.beagle for tftp
  BeagleBoard: config: hardcode MAC for onboard SMSC
  BeagleBoard: config: load kernel from MMC ext, not FAT
  BeagleBoard: Configure DVI/S-video
  BeagleBoard: Added userbutton command
  BeagleBoard: turn off clocks in ehci_stop
  USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor
  beagleboard: add support for xM revision C
  beagle: pass expansionboard name in bootargs
  OMAP: Remove omapfb.debug=y from Beagle and Overo env settings
  OMAP3 Beagle Pin Mux initialization glitch fix
  da850: modifications for Logic PD Rev.3 AM18xx EVM
  da850: fix the channel number for EMAC teardown init
  da850: add support for Spectrum Digital AM18xx EVM
  da850: add support to wake up DSP during board init
  da850: modify the U-Boot prompt string
  da850: add NOR boot mode support
  da8xx: add support for multiple PLL controllers
  da850: indicate cache usage disable in config file
  dm365: modify boot prompt from dm365 to dm36x
  dm365: disable cache usage due to coherency issues
  dm6446: disable cache usage due to coherency issues
  OMAP3: Remove legacy mmc driver
  devkit8000: Use generic MMC driver
  TI OMAP3 SDP3430: Use generic MMC driver
  AM3517 CraneBoard: Use generic MMC driver
  OMAP3: pandora: Use generic MMC driver
  OMAP3: Zoom2: Use generic MMC driver
  OMAP3: Zoom1: Use generic MMC driver
  OMAP3: DIG297: Use generic MMC driver
  OMAP3: CM-T35: Use generic MMC driver
  am3517evm: Use generic MMC driver
  omap3evm: Use generic MMC driver
  omap3:clock: check cpu_family before enabling clks for IVA & CAM
  omap3:clock: configure GFX clock to 200MHz for AM/DM37x
  OMAP3/4: Increase console I/O buffer size
  PXA: vpac270: Remove re-defined CONFIG_SYS_TEXT_BASE
  PXA: Fix CSB226, fix monitor length
  PXA: Fix Lubbock, remove redundant parenthesis
  armv7: cache: remove flush on un-aligned invalidate
  armv7: stronger barrier for cache-maintenance operations
  omap: enable caches at system start-up
  arm: do not force d-cache enable on all boards
  ORIGEN: Add MMC SPL support
  ARMV7: Add support for Samsung ORIGEN board
  i2c:gpio:s5p: Enable I2C GPIO on the GONI target
  i2c:gpio:s5p: I2C GPIO Software implementation (via soft_i2c)
  Tegra2: Use clock and pinmux functions to simplify code
  Tegra2: Add additional pin multiplexing features
  Tegra2: Add more clock support
  Tegra2: Add microsecond timer function
  ARM: remove broken "at91rm9200dk" board
  ARM: remove broken "m501sk" board
  ARM: remove broken "kb9202" board
  ARM: remove broken "csb637" board
  ARM: remove broken "cmc_pu2" board
  ARM: remove broken "at91cap9adk" board
  ARM: remove broken "voiceblue" board
  ARM: remove broken "smdk2400" board
  ARM: remove broken "sbc2410x" board
  ARM: remove broken "netstar" board
  ARM: remove broken "mx1fs2" board
  ARM: remove broken "lpd7a40x" boards
  ARM: remove broken "edb93xx" boards
  ARM: remove broken "B2" board
  ARM: remove broken "armadillo" board
  ARM: remove broken "assabet" board
  ARM: versatile: drop warnings
  IMX: scb9328: drop warnings
  MX31: imx31_litekit: make use of GPIO framework
  MX31: mx31ads: make use of GPIO framework
  MX5: mx51evk: make use of GPIO framework
  MX35: mx35pdk: make use of GPIO framework
  MX5: mx53loco: make use of GPIO framework
  MX5: mx53evk: make use of GPIO framework
  MX5: vision2: make use of GPIO framework
  MX5: mx53smd: make use of GPIO framework
  MX5: mx53ard: make use of GPIO framework
  MX25: zmx25: make use of GPIO framework
  MX5: efikamx: make use of GPIO framework
  MX31: QONG: make use of GPIO framework
  MX35: make use of GPIO framework for MX35 processor
  MX5: make use of GPIO framework for MX5 processor
  MX31: make use of GPIO framework for MX31 processor
  MX25: make use of GPIO framework for MX25 processor
  IMX: uniform GPIO interface using GPIO framework
  MX: MX35 / MX5: uniform clock command with powerpc
  MX35: MX35PDK: support additional RAM on CSD1
  mx53: ddr3: Update DD3 initialization
  ARM: MX51: PLL errata workaround
  ARM: versatilepb : drop warnings due to double definitions
  omap4: increase SRAM budget to fix build error
  omap4: fix build warning due to signed unsigned comparison
  mkimage: Fix 'Unknown OMAP image type - 5'
  omap: fix gpio related build breaks
  gpio:samsung: s5p_ suffix add for GPIO functions (C210_universal)
  SMDKV310: MMC SPL: Remove unwanted dummy functions
  SMDKV310: Fix undefined reference error
  SMDKV310: Fix build error for smdkv310 board
  gpio:samsung s5p_ suffix add for GPIO functions
  mmc: S5P: Support DMA restarts at buffer boundaries
  SMDKV310: Fix host compilation of mkv310_image
  arm: fix bd pointer dereference prior initialization
  arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize
  mx5: Remove CONFIG_L2_OFF and CONFIG_SYS_L2CACHE_OFF
  MX31: removed warnings due to clock.h
  integrator: convert to new build system
  integratorcp: make the board compile
  integratorap: remove hardcoded 32MB memory cmdline
  ...

1 files changed, 0 insertions, 238 deletions

diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
deleted file mode 100644
index a1976350e4..0000000000
--- a/include/configs/cmc_pu2.h
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * 2004-2005 Gary Jennejohn <garyj@denx.de>
- *
- * Configuration settings for the CMC PU2 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
-#define AT91C_MASTER_CLOCK	(AT91C_MAIN_CLOCK/3)	/* peripheral clock */
-
-#define AT91_SLOW_CLOCK		32768	/* slow clock */
-
-#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
-#define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
-#define CONFIG_CMC_PU2		1	/* on an CMC_PU2 Board		*/
-#undef  CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
-#define USE_920T_MMU		1
-
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG	1
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR		1
-/* flash */
-#define CONFIG_SYS_EBI_CFGR_VAL	0x00000000
-#define CONFIG_SYS_SMC_CSR0_VAL	0x100032ad /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define CONFIG_SYS_PLLAR_VAL	0x2026BE04 /* 179,712 MHz for PCK */
-#define CONFIG_SYS_PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define CONFIG_SYS_MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */
-
-/* sdram */
-#define CONFIG_SYS_PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define CONFIG_SYS_PIOC_BSR_VAL	0x00000000
-#define CONFIG_SYS_PIOC_PDR_VAL	0xFFFF0000
-#define CONFIG_SYS_EBI_CSA_VAL	0x00000002 /* CS1=CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_CR_VAL	0x3399c1d4 /* set up the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM	0x20000000 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM1	0x20000080 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM_VAL	0x00000000 /* value written to CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_MR_VAL	0x00000002 /* Precharge All */
-#define CONFIG_SYS_SDRC_MR_VAL1	0x00000004 /* refresh */
-#define CONFIG_SYS_SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
-#define CONFIG_SYS_SDRC_MR_VAL3	0x00000000 /* Normal Mode */
-#define CONFIG_SYS_SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
-#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_BAUDRATE		9600
-
-/*
- * Hardware drivers
- */
-
-/* define one of these to choose the DBGU, USART0  or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#undef CONFIG_DBGU
-#define CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef	CONFIG_HWFLOW			/* don't include RTS/CTS flow control support	*/
-
-#undef	CONFIG_MODEM_SUPPORT		/* disable modem initialization stuff */
-
-#define CONFIG_HARD_I2C
-
-#ifdef CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		0	/* not used */
-#define CONFIG_SYS_I2C_SLAVE		0	/* not used */
-#define CONFIG_RTC_RS5C372A		/* RICOH I2C RTC */
-#define CONFIG_SYS_I2C_RTC_ADDR	0x32
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
-#else
-#define CONFIG_TIMESTAMP
-#endif
-/* still about 20 kB free with this defined */
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_BOOTDELAY      1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MISC
-
-#if defined(CONFIG_HARD_I2C)
-    #define CONFIG_CMD_DATE
-    #define CONFIG_CMD_EEPROM
-    #define CONFIG_CMD_I2C
-#endif
-
-
-#define CONFIG_MISC_INIT_R
-#define CONFIG_SYS_LONGHELP
-
-#define AT91_SMART_MEDIA_ALE	(1 << 22)	/* our ALE is AD22 */
-#define AT91_SMART_MEDIA_CLE	(1 << 21)	/* our CLE is AD21 */
-
-#define CONFIG_NR_DRAM_BANKS	1
-#define PHYS_SDRAM		0x20000000
-#define PHYS_SDRAM_SIZE		0x1000000	/* 16 megs */
-
-#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
-
-#define CONFIG_NET_MULTI		1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC		1
-#define CONFIG_SYS_RX_ETH_BUFFER	8
-#else
-#define CONFIG_DRIVER_ETHER		1
-#endif
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_AT91C_USE_RMII
-
-#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
-#define CONFIG_SYS_MAX_DATAFLASH_PAGES		16384
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */
-
-#define PHYS_FLASH_1			0x10000000
-#define PHYS_FLASH_SIZE			0x800000  /* 8 megs main flash */
-#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MAX_FLASH_BANKS		1
-#define CONFIG_SYS_MAX_FLASH_SECT		256
-#define CONFIG_SYS_FLASH_ERASE_TOUT		(11 * CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT		( 2 * CONFIG_SYS_HZ)	/* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH		1
-#define CONFIG_ENV_OFFSET			0x20000		/* after u-boot.bin */
-#define CONFIG_ENV_SECT_SIZE		(64 << 10)	/* sectors are 64 kB */
-#define CONFIG_ENV_SIZE			(16 << 10)	/* Use only 16 kB */
-
-#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
-
-#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS		32		/* max number of command args */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2)	/* AT91C_TC0_CMR is implicitly set to */
-						/* AT91C_TC_TIMER_DIV1_CLOCK */
-
-#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#define	CONFIG_EXTRA_ENV_SETTINGS	\
-	"net_nfs=tftp ${loadaddr} ${bootfile};run nfsargs addip addcons " \
-		"addmtd;bootm\0" \
-	"nfsargs=setenv bootargs root=/dev/nfs rw " \
-		"nfsroot=${serverip}:${rootpath}\0" \
-	"net_cramfs=tftp ${loadaddr} ${bootfile}; run flashargs addip " \
-		"addcons addmtd; bootm\0" \
-	"flash_cramfs=run flashargs addip addcons addmtd; bootm 10030000\0" \
-	"flashargs=setenv bootargs root=/dev/mtdblock3 ro\0" \
-	"addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
-		"${hostname}::off\0" \
-	"addcons=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
-	"addmtd=setenv bootargs ${bootargs} mtdparts=cmc_pu2:128k(uboot)ro," \
-		"64k(environment),768k(linux),4096k(root),-\0" \
-	"load=tftp ${loadaddr} ${loadfile}\0" \
-	"update=protect off 10000000 1001ffff;erase 10000000 1001ffff; " \
-		"cp.b ${loadaddr} 10000000 ${filesize};" \
-		"protect on 10000000 1001ffff\0" \
-	"updatel=era 10030000 100effff;tftp ${loadaddr} ${bootfile}; " \
-		"cp.b ${loadaddr} 10030000 ${filesize}\0" \
-	"updatec=era 100f0000 104effff;tftp ${loadaddr} ${cramfsimage}; " \
-		"cp.b ${loadaddr} 100f0000 ${filesize}\0" \
-	"updatej=era 104f0000 107fffff;tftp ${loadaddr} ${jffsimage}; " \
-		"cp.b ${loadaddr} 104f0000 ${filesize}\0" \
-	"cramfsimage=cramfs_cmc-pu2.img\0" \
-	"jffsimage=jffs2_cmc-pu2.img\0" \
-	"loadfile=u-boot_cmc-pu2.bin\0" \
-	"bootfile=uImage_cmc-pu2\0" \
-	"loadaddr=0x20800000\0" \
-	"hostname=CMC-TC-PU2\0" \
-	"bootcmd=run dhcp_start;run flash_cramfs\0" \
-	"autoload=n\0" \
-	"dhcp_start=echo no DHCP\0" \
-	"ipaddr=192.168.0.190\0"
-#endif	/* __CONFIG_H */