Merge branch 'master' of git://git.denx.de/u-boot-nand-flash

2 files changed, 135 insertions, 15 deletions

diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index ae2fc19f4b..6cf807befa 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -62,6 +62,12 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_L2_CACHE				/* toggle L2 cache	*/
 #define CONFIG_BTB				/* toggle branch predition */
 
+#ifdef CONFIG_MK_NAND
+#define CONFIG_NAND_U_BOOT		1
+#define CONFIG_RAMBOOT_NAND		1
+#define CONFIG_RAMBOOT_TEXT_BASE	0xf8f82000
+#endif
+
 /*
  * Only possible on E500 Version 2 or newer cores.
  */
@@ -74,16 +80,29 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_MEMTEST_END		0x00400000
 
 /*
+ * Config the L2 Cache as L2 SRAM
+ */
+#define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
+#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
+#define CONFIG_SYS_L2_SIZE		(512 << 10)
+#define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
+
+/*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
 #define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
 #define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR
 						/* physical addr of CCSRBAR */
 #define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR
 						/* PQII uses CONFIG_SYS_IMMR */
 
+#if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_SYS_CCSRBAR_DEFAULT	CONFIG_SYS_CCSRBAR
+#else
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#endif
+
 #define CONFIG_SYS_PCI1_ADDR           (CONFIG_SYS_CCSRBAR+0x8000)
 #define CONFIG_SYS_PCIE1_ADDR          (CONFIG_SYS_CCSRBAR+0xa000)
 
@@ -152,8 +171,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_BCSR_BASE_PHYS	CONFIG_SYS_BCSR_BASE
 
 /*Chip select 0 - Flash*/
-#define CONFIG_SYS_BR0_PRELIM		0xfe000801
-#define	CONFIG_SYS_OR0_PRELIM		0xfe000ff7
+#define CONFIG_FLASH_BR_PRELIM		0xfe000801
+#define	CONFIG_FLASH_OR_PRELIM		0xfe000ff7
 
 /*Chip select 1 - BCSR*/
 #define CONFIG_SYS_BR1_PRELIM		0xf8000801
@@ -175,12 +194,33 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
+#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND)
+#define CONFIG_SYS_RAMBOOT
+#else
+#undef CONFIG_SYS_RAMBOOT
+#endif
+
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 
 /* Chip select 3 - NAND */
+#ifndef CONFIG_NAND_SPL
 #define CONFIG_SYS_NAND_BASE		0xFC000000
+#else
+#define CONFIG_SYS_NAND_BASE		0xFFF00000
+#endif
+
+/* NAND boot: 4K NAND loader config */
+#define CONFIG_SYS_NAND_SPL_SIZE	0x1000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	((512 << 10) - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_DST	(CONFIG_SYS_INIT_L2_ADDR)
+#define CONFIG_SYS_NAND_U_BOOT_START \
+	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	(0)
+#define CONFIG_SYS_NAND_U_BOOT_RELOC	(CONFIG_SYS_INIT_L2_END - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP	((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
+
 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE, }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
@@ -200,8 +240,18 @@ extern unsigned long get_clock_freq(void);
 				| OR_FCM_SCY_1 \
 				| OR_FCM_TRLX \
 				| OR_FCM_EHTR)
+
+#ifdef CONFIG_RAMBOOT_NAND
+#define CONFIG_SYS_BR0_PRELIM	CONFIG_NAND_BR_PRELIM	/* NAND Base Address */
+#define CONFIG_SYS_OR0_PRELIM	CONFIG_NAND_OR_PRELIM	/* NAND Options */
+#define CONFIG_SYS_BR3_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
+#define CONFIG_SYS_OR3_PRELIM	CONFIG_FLASH_OR_PRELIM	/* NOR Options */
+#else
+#define CONFIG_SYS_BR0_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
+#define CONFIG_SYS_OR0_PRELIM	CONFIG_FLASH_OR_PRELIM	/* NOR Options */
 #define CONFIG_SYS_BR3_PRELIM	CONFIG_NAND_BR_PRELIM /* NAND Base Address */
 #define CONFIG_SYS_OR3_PRELIM	CONFIG_NAND_OR_PRELIM /* NAND Options */
+#endif
 
 /*
  * SDRAM on the LocalBus
@@ -437,10 +487,18 @@ extern unsigned long get_clock_freq(void);
 /*
  * Environment
  */
+#if defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_RAMBOOT_NAND)
+#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET	((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#endif
+#else
 #define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SECT_SIZE	0x20000	/* 256K(one sector) for env */
 #define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+#endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
diff --git a/include/fsl_nfc.h b/include/fsl_nfc.h
index da5be379d1..279aaa55de 100644
--- a/include/fsl_nfc.h
+++ b/include/fsl_nfc.h
@@ -1,5 +1,4 @@
 /*
- *
  * (c) 2009 Magnus Lilja <lilja.magnus@gmail.com>
  *
  * See file CREDITS for list of people who contributed to this
@@ -25,21 +24,57 @@
 #define __FSL_NFC_H
 
 /*
+ * TODO: Use same register defs for nand_spl mxc nand driver
+ * and mtd mxc nand driver.
+ *
  * Register map and bit definitions for the Freescale NAND Flash
- * Controller present in i.MX31 and other devices.
+ * Controller present in various i.MX devices.
+ *
+ * MX31 and MX27 have version 1 which has
+ * 	4 512 byte main buffers and
+ * 	4 16 byte spare buffers
+ * 	to support up to 2K byte pagesize nand.
+ * 	Reading or writing a 2K page requires 4 FDI/FDO cycles.
+ *
+ * MX25 has version 1.1 which has
+ * 	8 512 byte main buffers and
+ * 	8 64 byte spare buffers
+ * 	to support up to 4K byte pagesize nand.
+ * 	Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
+ *      Also some of registers are moved and/or changed meaning as seen below.
  */
+#if defined(CONFIG_MX31) || defined(CONFIG_MX27)
+#define MXC_NFC_V1
+#elif defined(CONFIG_MX25)
+#define MXC_NFC_V1_1
+#else
+#warning "MXC NFC version not defined"
+#endif
+
+#if defined(MXC_NFC_V1)
+#define NAND_MXC_NR_BUFS		4
+#define NAND_MXC_SPARE_BUF_SIZE		16
+#define NAND_MXC_REG_OFFSET		0xe00
+#define NAND_MXC_2K_MULTI_CYCLE		1
+#elif defined(MXC_NFC_V1_1)
+#define NAND_MXC_NR_BUFS		8
+#define NAND_MXC_SPARE_BUF_SIZE		64
+#define NAND_MXC_REG_OFFSET		0x1e00
+#else
+#error "define CONFIG_NAND_MXC_VXXX to use the mxc spl_nand driver"
+#endif
 
 struct fsl_nfc_regs {
-	u32 main_area0[128]; /* @0x000 */
-	u32 main_area1[128];
-	u32 main_area2[128];
-	u32 main_area3[128];
-	u32 spare_area0[4];
-	u32 spare_area1[4];
-	u32 spare_area2[4];
-	u32 spare_area3[4];
-	u32 reserved1[64 - 16 + 64 * 5];
-	u16 bufsiz; /* @ 0xe00 */
+	u32 main_area[NAND_MXC_NR_BUFS][512/4];
+	u32 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE/4];
+	/*
+	 * reserved size is offset of nfc registers
+	 * minus total main and spare sizes
+	 */
+	u8 reserved1[NAND_MXC_REG_OFFSET
+		- NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
+#if defined(MXC_NFC_V1)
+	u16 bufsiz;
 	u16 reserved2;
 	u16 buffer_address;
 	u16 flash_add;
@@ -54,6 +89,30 @@ struct fsl_nfc_regs {
 	u16 nand_flash_wr_pr_st;
 	u16 nand_flash_config1;
 	u16 nand_flash_config2;
+#elif defined(MXC_NFC_V1_1)
+	u16 reserved2[2];
+	u16 buffer_address;
+	u16 flash_add;
+	u16 flash_cmd;
+	u16 configuration;
+	u16 ecc_status_result;
+	u16 ecc_status_result2;
+	u16 spare_area_size;
+	u16 nf_wr_prot;
+	u16 reserved3[2];
+	u16 nand_flash_wr_pr_st;
+	u16 nand_flash_config1;
+	u16 nand_flash_config2;
+	u16 reserved4;
+	u16 unlock_start_blk_add0;
+	u16 unlock_end_blk_add0;
+	u16 unlock_start_blk_add1;
+	u16 unlock_end_blk_add1;
+	u16 unlock_start_blk_add2;
+	u16 unlock_end_blk_add2;
+	u16 unlock_start_blk_add3;
+	u16 unlock_end_blk_add3;
+#endif
 };
 
 /*
@@ -98,6 +157,9 @@ struct fsl_nfc_regs {
  */
 #define NFC_INT		0x8000
 
+#ifdef MXC_NFC_V1_1
+#define NFC_4_8N_ECC	(1 << 0)
+#endif
 #define NFC_SP_EN	(1 << 2)
 #define NFC_ECC_EN	(1 << 3)
 #define NFC_INT_MSK	(1 << 4)