Merge with /home/wd/git/u-boot/master

3 files changed, 320 insertions, 14 deletions

diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 39419d05e3..41a3d394a1 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -367,17 +367,6 @@
 #define CONFIG_ATAPI			/* enable ATAPI Support */
 
 /************************************************************
- * SCSI support (experimental) only SYM53C8xx supported
- ************************************************************/
-#undef CONFIG_SCSI_SYM53C8XX
-
-#ifdef CONFIG_SCSI_SYM53C8XX
-#define CFG_SCSI_MAX_LUN	8 /* number of supported LUNs */
-#define CFG_SCSI_MAX_SCSI_ID	7 /* maximum SCSI ID (0..6) */
-#define CFG_SCSI_MAX_DEVICE	CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN /* maximum Target devices */
-#define CFG_SCSI_SPIN_UP_TIME	2
-#endif /* CONFIG_SCSI_SYM53C8XX */
-/************************************************************
  * DISK Partition support
  ************************************************************/
 #define CONFIG_DOS_PARTITION
diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
new file mode 100644
index 0000000000..2d3c0e5a91
--- /dev/null
+++ b/include/configs/Yukon8220.h
@@ -0,0 +1,317 @@
+/*
+ * (C) Copyright 2004
+ * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MPC8220		1
+#define CONFIG_YUKON8220	1	/* ... on Yukon board	*/
+
+/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
+   determine the CPU speed. */
+#define CFG_MPC8220_CLKIN	30000000/* ... running at 30MHz */
+#define CFG_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
+
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM		0x02	/* Software reboot	*/
+
+#define CFG_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5   /* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+
+/* Define this for PSC console
+#define CONFIG_PSC_CONSOLE	1
+*/
+
+#define CONFIG_EXTUART_CONSOLE	1
+
+#ifdef CONFIG_EXTUART_CONSOLE
+#   define CONFIG_CONS_INDEX	1
+#   define CFG_NS16550_SERIAL
+#   define CFG_NS16550
+#   define CFG_NS16550_REG_SIZE 1
+#   define CFG_NS16550_COM1	(CFG_CPLD_BASE + 0x1008)
+#   define CFG_NS16550_CLK	18432000
+#endif
+
+#define CONFIG_BAUDRATE		115200	    /* ... at 115200 bps */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+#define CONFIG_TIMESTAMP			/* Print image info with timestamp */
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_BOOTD	| \
+				CFG_CMD_CACHE	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DIAG	| \
+				CFG_CMD_EEPROM	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_NET	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_PCI	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_REGINFO | \
+				CFG_CMD_SDRAM	| \
+				CFG_CMD_SNTP	)
+
+#define CONFIG_NET_MULTI
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY	5    /* autoboot after 5 seconds */
+#define CONFIG_BOOTARGS		"root=/dev/ram rw"
+#define CONFIG_ETHADDR		00:e0:0c:bc:e0:60
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR		00:e0:0c:bc:e0:61
+#define CONFIG_IPADDR		192.162.1.2
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_SERVERIP		192.162.1.1
+#define CONFIG_GATEWAYIP	192.162.1.1
+#define CONFIG_HOSTNAME		yukon
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C		1
+#define CFG_I2C_MODULE		1
+
+#define CFG_I2C_SPEED		100000 /* 100 kHz */
+#define CFG_I2C_SLAVE		0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR		0x52	/* 1011000xb */
+#define CFG_I2C_EEPROM_ADDR_LEN		1
+#define CFG_EEPROM_PAGE_WRITE_BITS	3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+/*
+#define CFG_ENV_IS_IN_EEPROM	1
+#define CFG_ENV_OFFSET		0
+#define CFG_ENV_SIZE		256
+*/
+
+/* If CFG_AMD_BOOT is defined, the the system will boot from AMD.
+   else undefined it will boot from Intel Strata flash */
+#define CFG_AMD_BOOT		1
+
+/*
+ * Flexbus Chipselect configuration
+ */
+#if defined (CFG_AMD_BOOT)
+#define CFG_CS0_BASE		0xfff0
+#define CFG_CS0_MASK		0x00080000  /* 512 KB */
+#define CFG_CS0_CTRL		0x003f0d40
+
+#define CFG_CS1_BASE		0xfe00
+#define CFG_CS1_MASK		0x01000000  /* 16 MB */
+#define CFG_CS1_CTRL		0x003f1540
+#else
+#define CFG_CS0_BASE		0xff00
+#define CFG_CS0_MASK		0x01000000  /* 16 MB */
+#define CFG_CS0_CTRL		0x003f1540
+
+#define CFG_CS1_BASE		0xfe08
+#define CFG_CS1_MASK		0x00080000  /* 512 KB */
+#define CFG_CS1_CTRL		0x003f0d40
+#endif
+
+#define CFG_CS2_BASE		0xf100
+#define CFG_CS2_MASK		0x00040000
+#define CFG_CS2_CTRL		0x003f1140
+
+#define CFG_CS3_BASE		0xf200
+#define CFG_CS3_MASK		0x00040000
+#define CFG_CS3_CTRL		0x003f1100
+
+
+#define CFG_FLASH0_BASE		(CFG_CS0_BASE << 16)
+#define CFG_FLASH1_BASE		(CFG_CS1_BASE << 16)
+
+#if defined (CFG_AMD_BOOT)
+#define CFG_AMD_BASE		CFG_FLASH0_BASE
+#define CFG_INTEL_BASE		CFG_FLASH1_BASE + 0xf00000
+#define CFG_FLASH_BASE		CFG_AMD_BASE
+#else
+#define CFG_INTEL_BASE		CFG_FLASH0_BASE + 0xf00000
+#define CFG_AMD_BASE		CFG_FLASH1_BASE
+#define CFG_FLASH_BASE		CFG_INTEL_BASE
+#endif
+
+#define CFG_CPLD_BASE		(CFG_CS2_BASE << 16)
+#define CFG_FPGA_BASE		(CFG_CS3_BASE << 16)
+
+
+#define CFG_MAX_FLASH_BANKS	4	/* max num of memory banks	*/
+#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+
+#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CFG_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
+#define CFG_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
+
+#define PHYS_AMD_SECT_SIZE	0x00010000 /*  64 KB sectors (x2) */
+#define PHYS_INTEL_SECT_SIZE	0x00020000 /* 128 KB sectors (x2) */
+
+#define CFG_FLASH_CHECKSUM
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#if defined (CFG_AMD_BOOT)
+#define CFG_ENV_ADDR		(CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_AMD_SECT_SIZE)
+#define CFG_ENV_SIZE		PHYS_AMD_SECT_SIZE
+#define CFG_ENV_SECT_SIZE	PHYS_AMD_SECT_SIZE
+#define CFG_ENV1_ADDR		(CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_INTEL_SECT_SIZE)
+#define CFG_ENV1_SIZE		PHYS_INTEL_SECT_SIZE
+#define CFG_ENV1_SECT_SIZE	PHYS_INTEL_SECT_SIZE
+#else
+#define CFG_ENV_ADDR		(CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_INTEL_SECT_SIZE)
+#define CFG_ENV_SIZE		PHYS_INTEL_SECT_SIZE
+#define CFG_ENV_SECT_SIZE	PHYS_INTEL_SECT_SIZE
+#define CFG_ENV1_ADDR		(CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_AMD_SECT_SIZE)
+#define CFG_ENV1_SIZE		PHYS_AMD_SECT_SIZE
+#define CFG_ENV1_SECT_SIZE	PHYS_AMD_SECT_SIZE
+#endif
+
+#define CONFIG_ENV_OVERWRITE	1
+
+#if defined CFG_ENV_IS_IN_FLASH
+#undef CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_EEPROM
+#elif defined CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_FLASH
+#undef CFG_ENV_IS_IN_EEPROM
+#elif defined CFG_ENV_IS_IN_EEPROM
+#undef CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_FLASH
+#endif
+
+#ifndef CFG_JFFS2_FIRST_SECTOR
+#define CFG_JFFS2_FIRST_SECTOR	0
+#endif
+#ifndef CFG_JFFS2_FIRST_BANK
+#define CFG_JFFS2_FIRST_BANK	0
+#endif
+#ifndef CFG_JFFS2_NUM_BANKS
+#define CFG_JFFS2_NUM_BANKS	1
+#endif
+#define CFG_JFFS2_LAST_BANK (CFG_JFFS2_FIRST_BANK + CFG_JFFS2_NUM_BANKS - 1)
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR		0xF0000000
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_DEFAULT_MBAR	0x80000000
+#define CFG_SRAM_BASE		(CFG_MBAR + 0x20000)
+#define CFG_SRAM_SIZE		0x8000
+
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR	(CFG_MBAR + 0x20000)
+#define CFG_INIT_RAM_END	0x8000	/* End of used area in DPRAM */
+
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define CFG_RAMBOOT		1
+#endif
+
+#define CFG_MONITOR_LEN		(256 << 10) /* Reserve 256 kB for Monitor   */
+#define CFG_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
+#define CFG_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */
+
+/* SDRAM configuration */
+#define CFG_SDRAM_TOTAL_BANKS		2
+#define CFG_SDRAM_SPD_I2C_ADDR		0x51		/* 7bit */
+#define CFG_SDRAM_SPD_SIZE		0x40
+#define CFG_SDRAM_CAS_LATENCY		4		/* (CL=2)x2 */
+
+/* SDRAM drive strength register */
+#define CFG_SDRAM_DRIVE_STRENGTH	((DRIVE_STRENGTH_LOW  << SDRAMDS_SBE_SHIFT) | \
+					 (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
+					 (DRIVE_STRENGTH_LOW  << SDRAMDS_SBA_SHIFT) | \
+					 (DRIVE_STRENGTH_OFF  << SDRAMDS_SBS_SHIFT) | \
+					 (DRIVE_STRENGTH_LOW  << SDRAMDS_SBD_SHIFT))
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC8220_FEC	1
+#define CONFIG_FEC_10MBIT	1 /* Workaround for FEC 100Mbit problem */
+#define CONFIG_PHY_ADDR		0x18
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			    /* undef to save memory	*/
+#define CFG_PROMPT		"=> "	    /* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024	    /* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE		256	    /* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS		16	    /* max number of command args   */
+#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size    */
+
+#define CFG_MEMTEST_START	0x00100000  /* memtest works on */
+#define CFG_MEMTEST_END		0x00f00000  /* 1 ... 15 MB in DRAM  */
+
+#define CFG_LOAD_ADDR		0x100000    /* default load address */
+
+#define CFG_HZ			1000	    /* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL		HID0_ICE
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index 386ce0539b..1039762830 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -236,7 +236,7 @@
  * GP30 == SDATA_OUT is 0
  * GP81 == NSSPCLK   is 0
  */
-#define CFG_GPCR0_VAL		0x40C31868
+#define CFG_GPCR0_VAL		0x40C31848
 #define CFG_GPCR1_VAL		0x00000000
 #define CFG_GPCR2_VAL		0x00020000
 
@@ -455,10 +455,10 @@
  * [14:12] 010  - RRR2: CS deselect to CS time: 2*(2*MemClk) = 40 ns
  * [11:08] 0010 - RDN2: Address to data valid in bursts: (2+1)*MemClk = 30 ns
  * [07:04] 0110 - RDF2: Address for first access: (6+1)*MemClk = 70 ns
- * [03]    0    - 32 Bit bus width
+ * [03]    1    - 16 Bit bus width
  * [02:00] 100  - variable latency I/O
  */
-#define CFG_MSC1_VAL		0x1224A264
+#define CFG_MSC1_VAL		0x1224A26C
 
 /* This is the configuration for nCS4/5 -> LAN
  * configuration for nCS5: