1 files changed, 0 insertions, 124 deletions
diff --git a/arch/arm/cpu/at91-common/spl_at91.c b/arch/arm/cpu/at91-common/spl_at91.c
deleted file mode 100644
index 89f588be45..0000000000
--- a/arch/arm/cpu/at91-common/spl_at91.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * (C) Copyright 2014 DENX Software Engineering
- *     Heiko Schocher <hs@denx.de>
- *
- * Based on:
- * Copyright (C) 2013 Atmel Corporation
- *		      Bo Shen <voice.shen@atmel.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91sam9_matrix.h>
-#include <asm/arch/at91_pit.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_wdt.h>
-#include <asm/arch/clk.h>
-#include <spl.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void enable_ext_reset(void)
-{
-	struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
-
-	writel(AT91_RSTC_KEY | AT91_RSTC_MR_URSTEN, &rstc->mr);
-}
-
-void lowlevel_clock_init(void)
-{
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
-	if (!(readl(&pmc->sr) & AT91_PMC_MOSCS)) {
-		/* Enable Main Oscillator */
-		writel(AT91_PMC_MOSCS | (0x40 << 8), &pmc->mor);
-
-		/* Wait until Main Oscillator is stable */
-		while (!(readl(&pmc->sr) & AT91_PMC_MOSCS))
-			;
-	}
-
-	/* After stabilization, switch to Main Oscillator */
-	if ((readl(&pmc->mckr) & AT91_PMC_CSS) == AT91_PMC_CSS_SLOW) {
-		unsigned long tmp;
-
-		tmp = readl(&pmc->mckr);
-		tmp &= ~AT91_PMC_CSS;
-		tmp |= AT91_PMC_CSS_MAIN;
-		writel(tmp, &pmc->mckr);
-		while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
-			;
-
-		tmp &= ~AT91_PMC_PRES;
-		tmp |= AT91_PMC_PRES_1;
-		writel(tmp, &pmc->mckr);
-		while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
-			;
-	}
-
-	return;
-}
-
-void __weak matrix_init(void)
-{
-}
-
-void __weak at91_spl_board_init(void)
-{
-}
-
-void spl_board_init(void)
-{
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
-	lowlevel_clock_init();
-	at91_disable_wdt();
-
-	/*
-	 * At this stage the main oscillator is supposed to be enabled
-	 * PCK = MCK = MOSC
-	 */
-	writel(0x00, &pmc->pllicpr);
-
-	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
-	at91_plla_init(CONFIG_SYS_AT91_PLLA);
-
-	/* PCK = PLLA = 2 * MCK */
-	at91_mck_init(CONFIG_SYS_MCKR);
-
-	/* Switch MCK on PLLA output */
-	at91_mck_init(CONFIG_SYS_MCKR_CSS);
-
-#if defined(CONFIG_SYS_AT91_PLLB)
-	/* Configure PLLB */
-	at91_pllb_init(CONFIG_SYS_AT91_PLLB);
-#endif
-
-	/* Enable External Reset */
-	enable_ext_reset();
-
-	/* Initialize matrix */
-	matrix_init();
-
-	gd->arch.mck_rate_hz = CONFIG_SYS_MASTER_CLOCK;
-	/*
-	 * init timer long enough for using in spl.
-	 */
-	timer_init();
-
-	/* enable clocks for all PIOs */
-	at91_periph_clk_enable(ATMEL_ID_PIOA);
-	at91_periph_clk_enable(ATMEL_ID_PIOB);
-	at91_periph_clk_enable(ATMEL_ID_PIOC);
-	/* init console */
-	at91_seriald_hw_init();
-	preloader_console_init();
-
-	mem_init();
-
-	at91_spl_board_init();
-}