9 files changed, 0 insertions, 634 deletions
diff --git a/arch/avr32/include/asm/arch-at32ap700x/addrspace.h b/arch/avr32/include/asm/arch-at32ap700x/addrspace.h
deleted file mode 100644
index 7b25e2efe6..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/addrspace.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __ASM_AVR32_ADDRSPACE_H
-#define __ASM_AVR32_ADDRSPACE_H
-
-#include <asm/types.h>
-
-/* Memory segments when segmentation is enabled */
-#define P0SEG		0x00000000
-#define P1SEG		0x80000000
-#define P2SEG		0xa0000000
-#define P3SEG		0xc0000000
-#define P4SEG		0xe0000000
-
-/* Returns the privileged segment base of a given address */
-#define PXSEG(a)	(((unsigned long)(a)) & 0xe0000000)
-
-/* Returns the physical address of a PnSEG (n=1,2) address */
-#define PHYSADDR(a)	(((unsigned long)(a)) & 0x1fffffff)
-
-/*
- * Map an address to a certain privileged segment
- */
-#define P1SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG))
-#define P2SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG))
-#define P3SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
-#define P4SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
-
-/* virt_to_phys will only work when address is in P1 or P2 */
-static inline unsigned long virt_to_phys(volatile void *address)
-{
-	return PHYSADDR(address);
-}
-
-static inline void * phys_to_virt(unsigned long address)
-{
-	return (void *)P1SEGADDR(address);
-}
-
-#define cached(addr) ((void *)P1SEGADDR(addr))
-#define uncached(addr) ((void *)P2SEGADDR(addr))
-
-/*
- * Given a physical address and a length, return a virtual address
- * that can be used to access the memory range with the caching
- * properties specified by "flags".
- *
- * This implementation works for memory below 512MiB (flash, etc.) as
- * well as above 3.5GiB (internal peripherals.)
- */
-#define MAP_NOCACHE	(0)
-#define MAP_WRCOMBINE	(1 << 7)
-#define MAP_WRBACK	(MAP_WRCOMBINE | (1 << 9))
-#define MAP_WRTHROUGH	(MAP_WRBACK | (1 << 0))
-
-static inline void *
-map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
-{
-	return (void *)paddr;
-}
-
-#endif /* __ASM_AVR32_ADDRSPACE_H */
diff --git a/arch/avr32/include/asm/arch-at32ap700x/cacheflush.h b/arch/avr32/include/asm/arch-at32ap700x/cacheflush.h
deleted file mode 100644
index e08cd9de6d..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/cacheflush.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __ASM_AVR32_CACHEFLUSH_H
-#define __ASM_AVR32_CACHEFLUSH_H
-
-/*
- * Invalidate any cacheline containing virtual address vaddr without
- * writing anything back to memory.
- *
- * Note that this function may corrupt unrelated data structures when
- * applied on buffers that are not cacheline aligned in both ends.
- */
-static inline void dcache_invalidate_line(volatile void *vaddr)
-{
-	asm volatile("cache %0[0], 0x0b" : : "r"(vaddr) : "memory");
-}
-
-/*
- * Make sure any cacheline containing virtual address vaddr is written
- * to memory.
- */
-static inline void dcache_clean_line(volatile void *vaddr)
-{
-	asm volatile("cache %0[0], 0x0c" : : "r"(vaddr) : "memory");
-}
-
-/*
- * Make sure any cacheline containing virtual address vaddr is written
- * to memory and then invalidate it.
- */
-static inline void dcache_flush_line(volatile void *vaddr)
-{
-	asm volatile("cache %0[0], 0x0d" : : "r"(vaddr) : "memory");
-}
-
-/*
- * Invalidate any instruction cacheline containing virtual address
- * vaddr.
- */
-static inline void icache_invalidate_line(volatile void *vaddr)
-{
-	asm volatile("cache %0[0], 0x01" : : "r"(vaddr) : "memory");
-}
-
-/*
- * Applies the above functions on all lines that are touched by the
- * specified virtual address range.
- */
-void dcache_clean_range(volatile void *start, size_t len);
-void icache_invalidate_range(volatile void *start, size_t len);
-
-static inline void dcache_flush_unlocked(void)
-{
-	asm volatile("cache %0[5], 0x08" : : "r"(0) : "memory");
-}
-
-/*
- * Make sure any pending writes are completed before continuing.
- */
-#define sync_write_buffer() asm volatile("sync 0" : : : "memory")
-
-#endif /* __ASM_AVR32_CACHEFLUSH_H */
diff --git a/arch/avr32/include/asm/arch-at32ap700x/chip-features.h b/arch/avr32/include/asm/arch-at32ap700x/chip-features.h
deleted file mode 100644
index 822286df5f..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/chip-features.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2007 Atmel Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __ASM_AVR32_ARCH_CHIP_FEATURES_H__
-#define __ASM_AVR32_ARCH_CHIP_FEATURES_H__
-
-/* Currently, all the AP700x chips have these */
-#define AT32AP700x_CHIP_HAS_USART
-#define AT32AP700x_CHIP_HAS_MMCI
-#define AT32AP700x_CHIP_HAS_SPI
-
-/* Only AP7000 has ethernet interface */
-#ifdef CONFIG_AT32AP7000
-#define AT32AP700x_CHIP_HAS_MACB
-#endif
-
-/* AP7000 and AP7002 have LCD controller, but AP7001 does not */
-#if defined(CONFIG_AT32AP7000) || defined(CONFIG_AT32AP7002)
-#define AT32AP700x_CHIP_HAS_LCDC
-#endif
-
-#endif /* __ASM_AVR32_ARCH_CHIP_FEATURES_H__ */
diff --git a/arch/avr32/include/asm/arch-at32ap700x/clk.h b/arch/avr32/include/asm/arch-at32ap700x/clk.h
deleted file mode 100644
index 0721899fde..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/clk.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __ASM_AVR32_ARCH_CLK_H__
-#define __ASM_AVR32_ARCH_CLK_H__
-
-#include <asm/arch/chip-features.h>
-#include <asm/arch/portmux.h>
-
-#ifdef CONFIG_PLL
-#define PLL0_RATE	((CONFIG_SYS_OSC0_HZ / CONFIG_SYS_PLL0_DIV)	\
-				* CONFIG_SYS_PLL0_MUL)
-#define MAIN_CLK_RATE	PLL0_RATE
-#else
-#define MAIN_CLK_RATE	(CONFIG_SYS_OSC0_HZ)
-#endif
-
-static inline unsigned long get_cpu_clk_rate(void)
-{
-	return MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_CPU;
-}
-static inline unsigned long get_hsb_clk_rate(void)
-{
-	return MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_HSB;
-}
-static inline unsigned long get_pba_clk_rate(void)
-{
-	return MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_PBA;
-}
-static inline unsigned long get_pbb_clk_rate(void)
-{
-	return MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_PBB;
-}
-
-/* Accessors for specific devices. More will be added as needed. */
-static inline unsigned long get_sdram_clk_rate(void)
-{
-	return get_hsb_clk_rate();
-}
-#ifdef AT32AP700x_CHIP_HAS_USART
-static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
-{
-	return get_pba_clk_rate();
-}
-#endif
-#ifdef AT32AP700x_CHIP_HAS_MACB
-static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
-{
-	return get_pbb_clk_rate();
-}
-static inline unsigned long get_macb_hclk_rate(unsigned int dev_id)
-{
-	return get_hsb_clk_rate();
-}
-#endif
-#ifdef AT32AP700x_CHIP_HAS_MMCI
-static inline unsigned long get_mci_clk_rate(void)
-{
-	return get_pbb_clk_rate();
-}
-#endif
-#ifdef AT32AP700x_CHIP_HAS_SPI
-static inline unsigned long get_spi_clk_rate(unsigned int dev_id)
-{
-	return get_pba_clk_rate();
-}
-#endif
-#ifdef AT32AP700x_CHIP_HAS_LCDC
-static inline unsigned long get_lcdc_clk_rate(unsigned int dev_id)
-{
-	return get_hsb_clk_rate();
-}
-#endif
-
-extern void clk_init(void);
-
-/* Board code may need the SDRAM base clock as a compile-time constant */
-#define SDRAMC_BUS_HZ	(MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_HSB)
-
-/* Generic clock control */
-enum gclk_parent {
-	GCLK_PARENT_OSC0 = 0,
-	GCLK_PARENT_OSC1 = 1,
-	GCLK_PARENT_PLL0 = 2,
-	GCLK_PARENT_PLL1 = 3,
-};
-
-/* Some generic clocks have specific roles */
-#define GCLK_DAC_SAMPLE_CLK	6
-#define GCLK_LCDC_PIXCLK	7
-
-extern unsigned long __gclk_set_rate(unsigned int id, enum gclk_parent parent,
-		unsigned long rate, unsigned long parent_rate);
-
-/**
- * gclk_set_rate - configure and enable a generic clock
- * @id: Which GCLK[id] to enable
- * @parent: Parent clock feeding the GCLK
- * @rate: Target rate of the GCLK in Hz
- *
- * Returns the actual GCLK rate in Hz, after rounding to the nearest
- * supported rate.
- *
- * All three parameters are usually constant, hence the inline.
- */
-static inline unsigned long gclk_set_rate(unsigned int id,
-		enum gclk_parent parent, unsigned long rate)
-{
-	unsigned long parent_rate;
-
-	if (id > 7)
-		return 0;
-
-	switch (parent) {
-	case GCLK_PARENT_OSC0:
-		parent_rate = CONFIG_SYS_OSC0_HZ;
-		break;
-#ifdef CONFIG_SYS_OSC1_HZ
-	case GCLK_PARENT_OSC1:
-		parent_rate = CONFIG_SYS_OSC1_HZ;
-		break;
-#endif
-#ifdef PLL0_RATE
-	case GCLK_PARENT_PLL0:
-		parent_rate = PLL0_RATE;
-		break;
-#endif
-#ifdef PLL1_RATE
-	case GCLK_PARENT_PLL1:
-		parent_rate = PLL1_RATE;
-		break;
-#endif
-	default:
-		parent_rate = 0;
-		break;
-	}
-
-	return __gclk_set_rate(id, parent, rate, parent_rate);
-}
-
-/**
- * gclk_enable_output - enable output on a GCLK pin
- * @id: Which GCLK[id] pin to enable
- * @drive_strength: Drive strength of external GCLK pin, if applicable
- */
-static inline void gclk_enable_output(unsigned int id,
-		unsigned long drive_strength)
-{
-	switch (id) {
-	case 0:
-		portmux_select_peripheral(PORTMUX_PORT_A, 1 << 30,
-				PORTMUX_FUNC_A, drive_strength);
-		break;
-	case 1:
-		portmux_select_peripheral(PORTMUX_PORT_A, 1 << 31,
-				PORTMUX_FUNC_A, drive_strength);
-		break;
-	case 2:
-		portmux_select_peripheral(PORTMUX_PORT_B, 1 << 19,
-				PORTMUX_FUNC_A, drive_strength);
-		break;
-	case 3:
-		portmux_select_peripheral(PORTMUX_PORT_B, 1 << 29,
-				PORTMUX_FUNC_A, drive_strength);
-		break;
-	case 4:
-		portmux_select_peripheral(PORTMUX_PORT_B, 1 << 30,
-				PORTMUX_FUNC_A, drive_strength);
-		break;
-	}
-}
-
-#endif /* __ASM_AVR32_ARCH_CLK_H__ */
diff --git a/arch/avr32/include/asm/arch-at32ap700x/gpio.h b/arch/avr32/include/asm/arch-at32ap700x/gpio.h
deleted file mode 100644
index b5808c5d45..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/gpio.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) 2006, 2008 Atmel Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __ASM_AVR32_ARCH_GPIO_H__
-#define __ASM_AVR32_ARCH_GPIO_H__
-
-#include <asm/arch/chip-features.h>
-#include <asm/arch/hardware.h>
-
-#define NR_GPIO_CONTROLLERS	5
-
-/*
- * Pin numbers identifying specific GPIO pins on the chip.
- */
-#define GPIO_PIOA_BASE	(0)
-#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
-#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
-#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
-#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
-#define GPIO_PIN_PA(x)	(GPIO_PIOA_BASE + (x))
-#define GPIO_PIN_PB(x)	(GPIO_PIOB_BASE + (x))
-#define GPIO_PIN_PC(x)	(GPIO_PIOC_BASE + (x))
-#define GPIO_PIN_PD(x)	(GPIO_PIOD_BASE + (x))
-#define GPIO_PIN_PE(x)	(GPIO_PIOE_BASE + (x))
-
-static inline void *pio_pin_to_port(unsigned int pin)
-{
-	switch (pin >> 5) {
-	case 0:
-		return (void *)ATMEL_BASE_PIOA;
-	case 1:
-		return (void *)ATMEL_BASE_PIOB;
-	case 2:
-		return (void *)ATMEL_BASE_PIOC;
-	case 3:
-		return (void *)ATMEL_BASE_PIOD;
-	case 4:
-		return (void *)ATMEL_BASE_PIOE;
-	default:
-		return NULL;
-	}
-}
-
-#include <asm/arch-common/portmux-pio.h>
-
-#endif /* __ASM_AVR32_ARCH_GPIO_H__ */
diff --git a/arch/avr32/include/asm/arch-at32ap700x/hardware.h b/arch/avr32/include/asm/arch-at32ap700x/hardware.h
deleted file mode 100644
index 58ae965259..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/hardware.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __AT32AP7000_HARDWARE_H__
-#define __AT32AP7000_HARDWARE_H__
-
-/* Internal and external memories */
-#define EBI_SRAM_CS0_BASE			0x00000000
-#define EBI_SRAM_CS0_SIZE			0x04000000
-#define EBI_SRAM_CS4_BASE			0x04000000
-#define EBI_SRAM_CS4_SIZE			0x04000000
-#define EBI_SRAM_CS2_BASE			0x08000000
-#define EBI_SRAM_CS2_SIZE			0x04000000
-#define EBI_SRAM_CS3_BASE			0x0c000000
-#define EBI_SRAM_CS3_SIZE			0x04000000
-#define EBI_SRAM_CS1_BASE			0x10000000
-#define EBI_SRAM_CS1_SIZE			0x10000000
-#define EBI_SRAM_CS5_BASE			0x20000000
-#define EBI_SRAM_CS5_SIZE			0x04000000
-
-#define EBI_SDRAM_BASE				EBI_SRAM_CS1_BASE
-#define EBI_SDRAM_SIZE				EBI_SRAM_CS1_SIZE
-
-#define INTERNAL_SRAM_BASE			0x24000000
-#define INTERNAL_SRAM_SIZE			0x00008000
-
-/* Devices on the High Speed Bus (HSB) */
-#define LCDC_BASE					0xFF000000
-#define DMAC_BASE					0xFF200000
-#define USB_FIFO					0xFF300000
-
-/* Devices on Peripheral Bus A (PBA) */
-#define ATMEL_BASE_SPI0				0xFFE00000
-#define ATMEL_BASE_SPI1				0xFFE00400
-#define ATMEL_BASE_TWI0				0xFFE00800
-#define ATMEL_BASE_USART0			0xFFE00C00
-#define ATMEL_BASE_USART1			0xFFE01000
-#define ATMEL_BASE_USART2			0xFFE01400
-#define ATMEL_BASE_USART3			0xFFE01800
-#define ATMEL_BASE_SSC0				0xFFE01C00
-#define ATMEL_BASE_SSC1				0xFFE02000
-#define ATMEL_BASE_SSC2				0xFFE02400
-#define ATMEL_BASE_PIOA				0xFFE02800
-#define ATMEL_BASE_PIOB				0xFFE02C00
-#define ATMEL_BASE_PIOC				0xFFE03000
-#define ATMEL_BASE_PIOD				0xFFE03400
-#define ATMEL_BASE_PIOE				0xFFE03800
-#define ATMEL_BASE_PSIF				0xFFE03C00
-
-/* Devices on Peripheral Bus B (PBB) */
-#define ATMEL_BASE_SM				0xFFF00000
-#define ATMEL_BASE_INTC				0xFFF00400
-#define ATMEL_BASE_HMATRIX			0xFFF00800
-#define ATMEL_BASE_TIMER0			0xFFF00C00
-#define ATMEL_BASE_TIMER1			0xFFF01000
-#define ATMEL_BASE_PWM				0xFFF01400
-#define ATMEL_BASE_MACB0			0xFFF01800
-#define ATMEL_BASE_MACB1			0xFFF01C00
-#define ATMEL_BASE_DAC				0xFFF02000
-#define ATMEL_BASE_MMCI				0xFFF02400
-#define ATMEL_BASE_AUDIOC			0xFFF02800
-#define ATMEL_BASE_HISI				0xFFF02C00
-#define ATMEL_BASE_USB				0xFFF03000
-#define ATMEL_BASE_HSMC				0xFFF03400
-#define ATMEL_BASE_HSDRAMC			0xFFF03800
-#define ATMEL_BASE_ECC				0xFFF03C00
-
-#endif /* __AT32AP7000_HARDWARE_H__ */
diff --git a/arch/avr32/include/asm/arch-at32ap700x/hmatrix.h b/arch/avr32/include/asm/arch-at32ap700x/hmatrix.h
deleted file mode 100644
index d2a733fa40..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/hmatrix.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (C) 2008 Atmel Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __ASM_AVR32_ARCH_HMATRIX_H__
-#define __ASM_AVR32_ARCH_HMATRIX_H__
-
-#include <asm/hmatrix-common.h>
-
-/* Bitfields in SFR4 (EBI) */
-#define HMATRIX_EBI_SDRAM_ENABLE_OFFSET		1
-#define HMATRIX_EBI_SDRAM_ENABLE_SIZE		1
-#define HMATRIX_EBI_NAND_ENABLE_OFFSET		3
-#define HMATRIX_EBI_NAND_ENABLE_SIZE		1
-#define HMATRIX_EBI_CF0_ENABLE_OFFSET		4
-#define HMATRIX_EBI_CF0_ENABLE_SIZE		1
-#define HMATRIX_EBI_CF1_ENABLE_OFFSET		5
-#define HMATRIX_EBI_CF1_ENABLE_SIZE		1
-#define HMATRIX_EBI_PULLUP_DISABLE_OFFSET	8
-#define HMATRIX_EBI_PULLUP_DISABLE_SIZE		1
-
-/* HSB masters */
-#define HMATRIX_MASTER_CPU_DCACHE		0
-#define HMATRIX_MASTER_CPU_ICACHE		1
-#define HMATRIX_MASTER_PDC			2
-#define HMATRIX_MASTER_ISI			3
-#define HMATRIX_MASTER_USBA			4
-#define HMATRIX_MASTER_LCDC			5
-#define HMATRIX_MASTER_MACB0			6
-#define HMATRIX_MASTER_MACB1			7
-#define HMATRIX_MASTER_DMACA_M0			8
-#define HMATRIX_MASTER_DMACA_M1			9
-
-/* HSB slaves */
-#define HMATRIX_SLAVE_SRAM0			0
-#define HMATRIX_SLAVE_SRAM1			1
-#define HMATRIX_SLAVE_PBA			2
-#define HMATRIX_SLAVE_PBB			3
-#define HMATRIX_SLAVE_EBI			4
-#define HMATRIX_SLAVE_USBA			5
-#define HMATRIX_SLAVE_LCDC			6
-#define HMATRIX_SLAVE_DMACA			7
-
-#endif /* __ASM_AVR32_ARCH_HMATRIX_H__ */
diff --git a/arch/avr32/include/asm/arch-at32ap700x/mmu.h b/arch/avr32/include/asm/arch-at32ap700x/mmu.h
deleted file mode 100644
index 4736312f5d..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/mmu.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * In order to deal with the hardcoded u-boot requirement that virtual
- * addresses are always mapped 1:1 with physical addresses, we implement
- * a small virtual memory manager so that we can use the MMU hardware in
- * order to get the caching properties right.
- *
- * A few pages (or possibly just one) are locked in the TLB permanently
- * in order to avoid recursive TLB misses, but most pages are faulted in
- * on demand.
- */
-#ifndef __ASM_ARCH_MMU_H
-#define __ASM_ARCH_MMU_H
-
-#include <asm/sysreg.h>
-
-#define MMU_PAGE_SHIFT	20
-#define MMU_PAGE_SIZE	(1UL << MMU_PAGE_SHIFT)
-#define MMU_PAGE_ADDR_MASK	(~(MMU_PAGE_SIZE - 1))
-
-#define MMU_VMR_CACHE_NONE						\
-	(SYSREG_BF(AP, 3) | SYSREG_BF(SZ, 3) | SYSREG_BIT(TLBELO_D))
-#define MMU_VMR_CACHE_WBUF						\
-	(MMU_VMR_CACHE_NONE | SYSREG_BIT(B))
-#define MMU_VMR_CACHE_WRTHRU						\
-	(MMU_VMR_CACHE_NONE | SYSREG_BIT(TLBELO_C) | SYSREG_BIT(W))
-#define MMU_VMR_CACHE_WRBACK						\
-	(MMU_VMR_CACHE_WBUF | SYSREG_BIT(TLBELO_C))
-
-/*
- * This structure is used in our "page table". Instead of the usual
- * x86-inspired radix tree, we let each entry cover an arbitrary-sized
- * virtual address range and store them in a binary search tree. This is
- * somewhat slower, but should use significantly less RAM, and we
- * shouldn't get many TLB misses when using 1 MB pages anyway.
- *
- * With 1 MB pages, we need 12 bits to store the page number. In
- * addition, we stick an Invalid bit in the high bit of virt_pgno (if
- * set, it cannot possibly match any faulting page), and all the bits
- * that need to be written to TLBELO in phys_pgno.
- */
-struct mmu_vm_range {
-	uint16_t	virt_pgno;
-	uint16_t	nr_pages;
-	uint32_t	phys;
-};
-
-/*
- * An array of mmu_vm_range objects describing all pageable addresses.
- * The array is sorted by virt_pgno so that the TLB miss exception
- * handler can do a binary search to find the correct entry.
- */
-extern struct mmu_vm_range mmu_vmr_table[];
-
-/*
- * Initialize the MMU. This will set up a fixed TLB entry for the static
- * u-boot image at dest_addr and enable paging.
- */
-void mmu_init_r(unsigned long dest_addr);
-
-/*
- * Handle a TLB miss exception. This function is called directly from
- * the exception vector table written in assembly.
- */
-int mmu_handle_tlb_miss(void);
-
-#endif /* __ASM_ARCH_MMU_H */
diff --git a/arch/avr32/include/asm/arch-at32ap700x/portmux.h b/arch/avr32/include/asm/arch-at32ap700x/portmux.h
deleted file mode 100644
index 7ae05408c0..0000000000
--- a/arch/avr32/include/asm/arch-at32ap700x/portmux.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2006, 2008 Atmel Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __ASM_AVR32_ARCH_PORTMUX_H__
-#define __ASM_AVR32_ARCH_PORTMUX_H__
-
-#include <asm/arch/gpio.h>
-
-#define PORTMUX_PORT_A		((void *)ATMEL_BASE_PIOA)
-#define PORTMUX_PORT_B		((void *)ATMEL_BASE_PIOB)
-#define PORTMUX_PORT_C		((void *)ATMEL_BASE_PIOC)
-#define PORTMUX_PORT_D		((void *)ATMEL_BASE_PIOD)
-#define PORTMUX_PORT_E		((void *)ATMEL_BASE_PIOE)
-
-void portmux_enable_ebi(unsigned int bus_width, unsigned int addr_width,
-		unsigned long flags, unsigned long drive_strength);
-
-#define PORTMUX_EBI_CS(x)	(1 << (x))
-#define PORTMUX_EBI_NAND	(1 << 6)
-#define PORTMUX_EBI_CF(x)	(1 << ((x) + 7))
-#define PORTMUX_EBI_NWAIT	(1 << 9)
-
-#ifdef AT32AP700x_CHIP_HAS_USART
-static inline void portmux_enable_usart0(unsigned long drive_strength)
-{
-	portmux_select_peripheral(PORTMUX_PORT_A, (1 << 8) | (1 << 9),
-			PORTMUX_FUNC_B, 0);
-}
-
-static inline void portmux_enable_usart1(unsigned long drive_strength)
-{
-	portmux_select_peripheral(PORTMUX_PORT_A, (1 << 17) | (1 << 18),
-			PORTMUX_FUNC_A, 0);
-}
-
-static inline void portmux_enable_usart2(unsigned long drive_strength)
-{
-	portmux_select_peripheral(PORTMUX_PORT_B, (1 << 26) | (1 << 27),
-			PORTMUX_FUNC_B, 0);
-}
-
-static inline void portmux_enable_usart3(unsigned long drive_strength)
-{
-	portmux_select_peripheral(PORTMUX_PORT_B, (1 << 17) | (1 << 18),
-			PORTMUX_FUNC_B, 0);
-}
-#endif
-#ifdef AT32AP700x_CHIP_HAS_MACB
-void portmux_enable_macb0(unsigned long flags, unsigned long drive_strength);
-void portmux_enable_macb1(unsigned long flags, unsigned long drive_strength);
-
-#define PORTMUX_MACB_RMII	(0)
-#define PORTMUX_MACB_MII	(1 << 0)
-#define PORTMUX_MACB_SPEED	(1 << 1)
-
-#endif
-#ifdef AT32AP700x_CHIP_HAS_MMCI
-void portmux_enable_mmci(unsigned int slot, unsigned long flags,
-		unsigned long drive_strength);
-
-#define PORTMUX_MMCI_4BIT	(1 << 0)
-#define PORTMUX_MMCI_8BIT	(PORTMUX_MMCI_4BIT | (1 << 1))
-#define PORTMUX_MMCI_EXT_PULLUP	(1 << 2)
-
-#endif
-#ifdef AT32AP700x_CHIP_HAS_SPI
-void portmux_enable_spi0(unsigned long cs_mask, unsigned long drive_strength);
-void portmux_enable_spi1(unsigned long cs_mask, unsigned long drive_strength);
-#endif
-#ifdef AT32AP700x_CHIP_HAS_LCDC
-void portmux_enable_lcdc(int pin_config);
-#endif
-
-#endif /* __ASM_AVR32_ARCH_PORTMUX_H__ */