diff options
Diffstat (limited to 'include/configs/omap3_overo.h')
| -rw-r--r-- | include/configs/omap3_overo.h | 184 |
1 files changed, 0 insertions, 184 deletions
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h deleted file mode 100644 index 9a5b9f297c..0000000000 --- a/include/configs/omap3_overo.h +++ /dev/null @@ -1,184 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration settings for the Gumstix Overo board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <configs/ti_omap3_common.h> -/* - * We are only ever GP parts and will utilize all of the "downloaded image" - * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB). - */ - -/* call misc_init_r */ - -/* pass the revision tag */ -#define CONFIG_REVISION_TAG - -/* override size of malloc() pool */ -#undef CONFIG_SYS_MALLOC_LEN -/* Shift 128 << 15 provides 4 MiB heap to support UBI commands. - * Shift 128 << 10 provides 128 KiB heap for limited-memory devices. */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 15)) - -/* I2C Support */ - -/* TWL4030 LED */ - -/* USB EHCI */ -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 183 - -/* commands to include */ - -#ifdef CONFIG_MTD_RAW_NAND -/* NAND block size is 128 KiB. Synchronize these values with - * overo_nand_partitions in mach-omap2/board-overo.c in Linux: - * xloader 4 * NAND_BLOCK_SIZE = 512 KiB - * uboot 14 * NAND_BLOCK_SIZE = 1792 KiB - * uboot environtment 2 * NAND_BLOCK_SIZE = 256 KiB - * linux 64 * NAND_BLOCK_SIZE = 8 MiB - * rootfs remainder - */ -#endif /* CONFIG_MTD_RAW_NAND */ - -/* Board NAND Info. */ -/* Environment information */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ - "bootdir=/boot\0" \ - "bootfile=zImage\0" \ - "usbtty=cdc_acm\0" \ - "console=ttyO2,115200n8\0" \ - "mpurate=auto\0" \ - "optargs=\0" \ - "vram=12M\0" \ - "dvimode=1024x768MR-16@60\0" \ - "defaultdisplay=dvi\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "nandroot=ubi0:rootfs ubi.mtd=4\0" \ - "nandrootfstype=ubifs\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "mpurate=${mpurate} " \ - "vram=${vram} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapdss.def_disp=${defaultdisplay} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "nandargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "mpurate=${mpurate} " \ - "vram=${vram} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapdss.def_disp=${defaultdisplay} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running boot script from mmc ...; " \ - "source ${loadaddr}\0" \ - "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t ${loadaddr} ${filesize}\0" \ - "loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadfdt=load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - "loadubizimage=ubifsload ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadubifdt=ubifsload ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - "mmcbootfdt=echo Booting with DT from mmc ...; " \ - "run mmcargs; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "if nand read ${loadaddr} linux; then " \ - "bootm ${loadaddr};" \ - "fi;\0" \ - "nanddtsboot=echo Booting from nand with DTS...; " \ - "run nandargs; " \ - "ubi part rootfs; "\ - "ubifsmount ubi0:rootfs; "\ - "run loadubifdt; "\ - "run loadubizimage; "\ - "bootz ${loadaddr} - ${fdtaddr}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "fi;" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loaduimage; then " \ - "run mmcboot;" \ - "fi;" \ - "if run loadzimage; then " \ - "if test -z \"${fdtfile}\"; then " \ - "setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \ - "fi;" \ - "if run loadfdt; then " \ - "run mmcbootfdt;" \ - "fi;" \ - "fi;" \ - "fi;" \ - "run nandboot; " \ - "if test -z \"${fdtfile}\"; then "\ - "setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \ - "fi;" \ - "run nanddtsboot; " \ - -/* memtest works on */ - -/* FLASH and environment organization */ -#if defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_SYS_FLASH_BASE NAND_BASE -#endif - -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP - -#define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */ -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ - -/* Initial RAM setup */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 - -/* NAND boot config */ -#define CONFIG_SYS_NAND_MAX_ECCPOS 56 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \ - 13, 14, 16, 17, 18, 19, 20, 21, 22, \ - 23, 24, 25, 26, 27, 28, 30, 31, 32, \ - 33, 34, 35, 36, 37, 38, 39, 40, 41, \ - 42, 44, 45, 46, 47, 48, 49, 50, 51, \ - 52, 53, 54, 55, 56} -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 13 -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -/* NAND: SPL falcon mode configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#endif - -#endif /* __CONFIG_H */ |